Skip to content
  • Categories
  • Recent
  • Tags
  • Popular
  • Unsolved
Collapse
Discussion Forum to share and further the development of home control and automation, independent of platforms.
  1. Home
  2. Software
  3. Multi-System Reactor
  4. iPhone location or alternative.
Gradually turn on lights.
Tom_DT
I have several lights that I would like to turn on very gradually over 15 or 20 seconds. from 0 to .25 in .01 increments. I have tried a few things that came nowhere near working, so here I am.
Multi-System Reactor
Stop the MSR by an external switch on Hubitat.
wmarcolinW
Use case: When performing home maintenance, such as air conditioning, I want all rules involving air conditioning to be disabled. To do this, to day, I have a virtual switch that I placed within all rules involving air conditioning, meaning that if I turn it off, none of them work. Then another situation: the water pump system and garden irrigation, another switch. In short, I had to create several virtual switches in Hubitat to disable rules in MSR. Unfortunately, however, I was unable to cover all scenarios, so I wondered if it would be possible for MSR to support a virtual MSR switch, which, when configured in the reactor settings, would function as a general on/off switch for MSR. If it is configured and turned off, the entire rules and actions in MSR stops working, except for the status change reading process, specifically for this switch, which, when turned on, would restart the MSR. Would it be possible to do something like this? Any recommendations from the experts?
Multi-System Reactor
Error After Upgrade
T
Topic thumbnail image
Multi-System Reactor
Reset attribute value of entity in event handler
R
Topic thumbnail image
Multi-System Reactor
Need help figuring out how to delay a reset on reaction
T
Topic thumbnail image
Multi-System Reactor
Way to search for rules (rule state) in other rules
T
@toggledbits, not sure if this is a feature request or I'm using the search tool wrong. You have a "Search for rule" in the Rules Set tab in MSR. It works nicely to find a rule and bring up said rule, but can it/could it be used for as a "where used?" global search? For instance, I have a fairly large set of rules, divided up into 10 different rulesets. There's easily a hundred individual rules, and many of the rules have Rule State triggers, which of course refer to other rules. Amongst my troubleshooting today, I came across what may have been a duplicate or troubleshooting attempt, but I can't tell if it's actually used as a Rule State in another rule without opening each rule that I suspect it may be a part of. Thanks.
Multi-System Reactor
Links to MSR from HA
Tom_DT
I am using Home Assistant a lot recently. On a dashboard showing the devices, I would like to show a link to the MSR rule that controls the devices. Is there a way to link directly into MSR?
Multi-System Reactor
Set Reaction > Script Action
wmarcolinW
Topic thumbnail image
Multi-System Reactor
Errors after updating to MQTTController build 25139
tunnusT
I'm running MSR build 25139 on Docker, using MQTT controller 24293, and everything working as expected. But if I try to upgrade to MQTTController build 25139, I'm getting the following errors on MSR UI: An Entity Attribute condition in "Lay-Z-Spa auto heating off" (Terrace) failed because the referenced entity "Lay-Z-Spa States" (mqtt>layzspa_states) does not have attribute value_sensor.god Last 11:20:37 An Entity Attribute condition in "Lay-Z-Spa auto heating off" (Terrace) failed because the referenced entity "Lay-Z-Spa States" (mqtt>layzspa_states) does not have attribute temperature_sensor.green Last 11:20:37 An Entity Attribute condition in "Lay-Z-Spa filter pump auto off" (Terrace) failed because the referenced entity "Lay-Z-Spa States" (mqtt>layzspa_states) does not have attribute temperature_sensor.red Last 11:20:37 An Entity Attribute condition in "Lay-Z-Spa filter pump auto run" (Terrace) failed because the referenced entity "Lay-Z-Spa States" (mqtt>layzspa_states) does not have attribute value_sensor.pump Last 11:20:37 An Entity Attribute condition in "Lay-Z-Spa watchdog" (Terrace) failed because the referenced entity "Lay-Z-Spa States" (mqtt>layzspa_states) does not have attribute value_sensor.status Last 11:20:37 My MQTT configuration (local_mqtt_devices.yaml) for the related entity is: layzspa_message: type: ValueSensor capabilities: ["temperature_sensor", "value_sensor", "power_sensor"] primary_attribute: power_sensor.value events: "layzspa/message": "power_sensor.value": json_payload: true if_expr: '! isnull( payload?.PWR )' expr: "float(payload.PWR)" "value_sensor.air": json_payload: true if_expr: '! isnull( payload?.AIR )' expr: "float(payload.AIR)" "value_sensor.pump": json_payload: true if_expr: '! isnull( payload?.FLT )' expr: "float(payload.FLT)" "value_sensor.god": json_payload: true if_expr: '! isnull( payload?.GOD )' expr: "float(payload.GOD)" "value_sensor.lock": json_payload: true if_expr: '! isnull( payload?.LCK )' expr: "float(payload.LCK)" "value_sensor.unit": json_payload: true if_expr: '! isnull( payload?.UNT )' expr: "float(payload.UNT)" "value_sensor.error": json_payload: true if_expr: '! isnull( payload?.ERR )' expr: "float(payload.ERR)" "temperature_sensor.green": json_payload: true if_expr: '! isnull( payload?.GRN )' expr: "float(payload.GRN)" "temperature_sensor.red": json_payload: true if_expr: '! isnull( payload?.RED )' expr: "float(payload.RED)" "temperature_sensor.target": json_payload: true if_expr: '! isnull( payload?.TGT )' expr: "float(payload.TGT)" "temperature_sensor.value": json_payload: true if_expr: '! isnull( payload?.TMP )' expr: "float(payload.TMP)" "temperature_sensor.virtual": json_payload: true if_expr: '! isnull( payload?.VTM )' expr: "round(float(payload.VTM), 1)" "temperature_sensor.ambient": json_payload: true if_expr: '! isnull( payload?.AMB )' expr: "float(payload.AMB)" "layzspa/Status": "value_sensor.status": if_expr: '! isnull( payload )' expr: "payload" "layzspa/button": "value_sensor.button": if_expr: '! isnull( payload )' expr: "payload" and in reactor.yaml I have: "layzspa_states": name: "Lay-Z-Spa States" friendly_name: 'Lay-Z-Spa States' include: layzspa_message I realize my MQTT configuration might be a bit unorthodox, but could there still be something unintentional in the latest MQTTController build? If needed, I can provide detailed logs.
Multi-System Reactor
🎉 My very first MSR controller: OpenSprinkler
therealdbT
Since today is my birthday - and I still pretend to be unconventional - I'm giving away a present to this wonderful community and I'm releasing my first OpenSprinkler controller for MSR. It was real fun to code it - and while it's still WIP, it seems to work OK for me. It's polling-based at the moment, but I'll add support for updates via MQTT very soon (it's already partially coded). Get it at (install is similar to MQTTController and such): https://github.com/dbochicchio/reactor-opensprinkler Feel free to try it. It's beta software, but it's stable. I'll update it weekly until all the tasks from my todo list are empty. Since I've learnt a lot from this controller, I'll explore new controllers soon.
Multi-System Reactor
Advice reqeusted to migrate MSR from Bare Metal to Container
T
Good day all, I'm in the process of trying to shut down my 10 year old Linux home server that served many purposes, but primarily it's what I used for my NAS/Plex Media server. I migrated the NAS aspect of the server in November of last year to a true NAS solution (Ubiquti UNAS Pro), which is rack mount and much more efficient than my old tower, which it's only side benefit was heating my home office during the winter. Unfortunately it also means heating my home office during the summer, which were about to be in full swing. I have two things running on this 10 year old server at this point. MSR and pi-hole. I'm running Plex Media Server on Fedora Workstation in Podman on mini PC, which is much more energy efficient than my old tower. My next step is to migrate MSR. I know there are images of MSR out there, and creating it is well documented. I'm going to be using Podman instead of Docker for various reasons, but they work very similar. What I don't know, is what I need to do to migrate my existing Bare Metal installation over to a container. Has anyone done this? Any advice?
Multi-System Reactor
Reactor (Multi-System/Multi-Hub) Announcements
toggledbitsT
Build 21228 has been released. Docker images available from DockerHub as usual, and bare-metal packages here. Home Assistant up to version 2021.8.6 supported; the online version of the manual will now state the current supported versions; Fix an error in OWMWeatherController that could cause it to stop updating; Unify the approach to entity filtering on all hub interface classes (controllers); this works for device entities only; it may be extended to other entities later; Improve error detail in messages for EzloController during auth phase; Add isRuleSet() and isRuleEnabled() functions to expressions extensions; Implement set action for lock and passage capabilities (makes them more easily scriptable in some cases); Fix a place in the UI where 24-hour time was not being displayed.
Multi-System Reactor
Can´t restart or upgrade/deploy MSR
F
Topic thumbnail image
Multi-System Reactor
[Solved] Limit HA Entity in MSR
wmarcolinW
Topic thumbnail image
Multi-System Reactor
Organizing/ structuring rule sets and rules
R
Hi guys, Just wondering how you guys organize your rule sets and rules. I wish I had an extra layer to have some more granularity, but my feature request was not popular. Maybe there are better ways to organize my rule sets. I use the rule sets now primarily for rooms. So a rule set per room. But maybe grouping by functionality works better. Any examples/ suggestions would be appreciated.
Multi-System Reactor
Moving MSR from a QNAP container to RP 5 - some issues
Tom_DT
Topic thumbnail image
Multi-System Reactor
Widget deletion does not work and landing page (status) is empy
M
Topic thumbnail image
Multi-System Reactor
Need help reducing false positive notifications
T
Topic thumbnail image
Multi-System Reactor
Deleting widgets
tunnusT
Hopefully a trivial question, but how do you delete widgets in a status page? Using build 22266
Multi-System Reactor
MQTT configuration question
tunnusT
I have the following yaml configuration in local_mqtt_devices file x_mqtt_device: set_speed: arguments: speed: type: str topic: "command/%friendly_name%" payload: type: json expr: '{ "fan": parameters.speed }' While this works fine, I'm wondering how this could be changed to "fixed" parameters, as in this case "fan" only accepts "A", "Q" or a numeric value of 1-5?
Multi-System Reactor

iPhone location or alternative.

Scheduled Pinned Locked Moved Multi-System Reactor
54 Posts 6 Posters 5.8k Views 6 Watching
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • therealdbT Offline
    therealdbT Offline
    therealdb
    wrote on last edited by
    #34

    Not sure if @gwp1 was trying the new support in HASS, but I'm leaning a link anyway https://www.home-assistant.io/integrations/ibeacon

    --
    On a mission to automate everything.

    My MS Reactor contrib
    My Luup Plug-ins

    G 1 Reply Last reply
    0
    • CatmanV2C Offline
      CatmanV2C Offline
      CatmanV2
      wrote on last edited by
      #35

      So I now have two phones that appear to be working just fine in terms of the Owntracks notifications. Clearly it's early days but I wonder if some of the issues that I have perceived are that although Owntracks is reporting to MQQT almost instantly, the screen notifications are not...

      C

      The Ex-Vera abuser know as CatmanV2.....

      1 Reply Last reply
      0
      • therealdbT therealdb

        Not sure if @gwp1 was trying the new support in HASS, but I'm leaning a link anyway https://www.home-assistant.io/integrations/ibeacon

        G Offline
        G Offline
        gwp1
        wrote on last edited by
        #36

        @therealdb I was not - I will look into this.

        *Hubitat C-7 2.4.1.177
        *Proxmox VE v8, Beelink MiniPC 12GBs, SSD

        *HASS 2025.6.0
        w/ ZST10-700 fw 7.18.3

        *Prod MSR in docker/portainer
        MSR: latest-25139-fbd67abc
        MQTTController: 25139
        ZWave Controller: 25139

        1 Reply Last reply
        0
        • CatmanV2C Offline
          CatmanV2C Offline
          CatmanV2
          wrote on last edited by CatmanV2
          #37

          I may have spoken too soon. Mrs C's phone still claims to not be home. I suspect a config error on the phone however given it triggered correctly when she left the region

          <edit>
          I managed to pry her phone away and check the settings. Her region had vanished. I've seen this once on mine and assumed it was because we had the same RegionName (hence mine being Home2) but clearly not.

          Having re-created the region and published, the entity changed state as expected.

          The region was clearly there when she exited this morning (as the entity changed from 'null' to 'false') so this will need to be watched.

          Maybe it's just 'Home' it does not like as a region name <shrug>

          C

          The Ex-Vera abuser know as CatmanV2.....

          G 1 Reply Last reply
          0
          • CatmanV2C CatmanV2

            I may have spoken too soon. Mrs C's phone still claims to not be home. I suspect a config error on the phone however given it triggered correctly when she left the region

            <edit>
            I managed to pry her phone away and check the settings. Her region had vanished. I've seen this once on mine and assumed it was because we had the same RegionName (hence mine being Home2) but clearly not.

            Having re-created the region and published, the entity changed state as expected.

            The region was clearly there when she exited this morning (as the entity changed from 'null' to 'false') so this will need to be watched.

            Maybe it's just 'Home' it does not like as a region name <shrug>

            C

            G Offline
            G Offline
            gwp1
            wrote on last edited by
            #38

            @catmanv2 Changes to user and a couple other settings will remove all regions.

            *Hubitat C-7 2.4.1.177
            *Proxmox VE v8, Beelink MiniPC 12GBs, SSD

            *HASS 2025.6.0
            w/ ZST10-700 fw 7.18.3

            *Prod MSR in docker/portainer
            MSR: latest-25139-fbd67abc
            MQTTController: 25139
            ZWave Controller: 25139

            CatmanV2C 1 Reply Last reply
            1
            • G gwp1

              @catmanv2 Changes to user and a couple other settings will remove all regions.

              CatmanV2C Offline
              CatmanV2C Offline
              CatmanV2
              wrote on last edited by
              #39

              @gwp1 Thanks. That would be it!

              C

              The Ex-Vera abuser know as CatmanV2.....

              1 Reply Last reply
              0
              • CatmanV2C Offline
                CatmanV2C Offline
                CatmanV2
                wrote on last edited by
                #40

                OK so this is mostly good. There is less functionality than iPhone locator (i.e. ETA isn't trrivial to get out) but still not 100% reliable. I was travelling from Friday to yesterday. I failed to get an update that I'd 'got home' yesterday PM. Mrs C was at home all that time, going to work and back, and reported perfectly so I have to assume it's a configuration / implementation on my phone.

                C

                The Ex-Vera abuser know as CatmanV2.....

                MikeReadingtonM 1 Reply Last reply
                0
                • CatmanV2C CatmanV2

                  OK so this is mostly good. There is less functionality than iPhone locator (i.e. ETA isn't trrivial to get out) but still not 100% reliable. I was travelling from Friday to yesterday. I failed to get an update that I'd 'got home' yesterday PM. Mrs C was at home all that time, going to work and back, and reported perfectly so I have to assume it's a configuration / implementation on my phone.

                  C

                  MikeReadingtonM Offline
                  MikeReadingtonM Offline
                  MikeReadington
                  wrote on last edited by
                  #41

                  @catmanv2 Same here, it works but not 100% reliable. A few misses that seem to correlate to if I am on the phone or not. I really miss the reliability iPhone locator.

                  1 Reply Last reply
                  0
                  • therealdbT Offline
                    therealdbT Offline
                    therealdb
                    wrote on last edited by therealdb
                    #42

                    It's 100% reliable for me and my Wifi routers are doing the 0,001% of the edge cases.
                    I'm using my WIFI routers to confirm I'm home (when it's not triggering directlty) and I'll soon add ESPresence to the mix (mainly for cars, but we'll see).

                    --
                    On a mission to automate everything.

                    My MS Reactor contrib
                    My Luup Plug-ins

                    CatmanV2C 1 Reply Last reply
                    1
                    • therealdbT therealdb

                      It's 100% reliable for me and my Wifi routers are doing the 0,001% of the edge cases.
                      I'm using my WIFI routers to confirm I'm home (when it's not triggering directlty) and I'll soon add ESPresence to the mix (mainly for cars, but we'll see).

                      CatmanV2C Offline
                      CatmanV2C Offline
                      CatmanV2
                      wrote on last edited by
                      #43

                      @therealdb are you EU or US? I suspect there's some data 'protection' witchery going on. Or at least some phone based config that is not directly in the app itself. (I mean my phone is always asking me if I want such and such an app to continue to access my location. I imagine missing one of those notifications is going to break stuff....)

                      C

                      The Ex-Vera abuser know as CatmanV2.....

                      therealdbT 1 Reply Last reply
                      0
                      • CatmanV2C CatmanV2

                        @therealdb are you EU or US? I suspect there's some data 'protection' witchery going on. Or at least some phone based config that is not directly in the app itself. (I mean my phone is always asking me if I want such and such an app to continue to access my location. I imagine missing one of those notifications is going to break stuff....)

                        C

                        therealdbT Offline
                        therealdbT Offline
                        therealdb
                        wrote on last edited by
                        #44

                        @catmanv2 I'm based in Italy, so that makes me under GDPR. I'm even the CISO for our company, so I know how hard it is. But given OwnTracks is totally self-hosted, I don't think GDPR is the culprit - well, not in this case.

                        --
                        On a mission to automate everything.

                        My MS Reactor contrib
                        My Luup Plug-ins

                        1 Reply Last reply
                        1
                        • CatmanV2C Offline
                          CatmanV2C Offline
                          CatmanV2
                          wrote on last edited by
                          #45

                          Hmm interesting. Perhaps it's just UK 😄

                          C

                          The Ex-Vera abuser know as CatmanV2.....

                          1 Reply Last reply
                          0
                          • CatmanV2C Offline
                            CatmanV2C Offline
                            CatmanV2
                            wrote on last edited by CatmanV2
                            #46

                            So came home tonight. My phone says 'entering home'. MSR doesn't. Not had a dig yet

                            <Edit>

                            OK that's interesting. Owntracks was reporting that the network was down. I have a. VPN to my home system, which doesn't respond if you're on the network (if that make sense).

                            As soon as I disconnected from the VPN, bingo. Soooooo need to either sort out the VPN from local (which seems daft) or get some automatic disconnect.

                            C

                            The Ex-Vera abuser know as CatmanV2.....

                            therealdbT 1 Reply Last reply
                            0
                            • CatmanV2C CatmanV2

                              So came home tonight. My phone says 'entering home'. MSR doesn't. Not had a dig yet

                              <Edit>

                              OK that's interesting. Owntracks was reporting that the network was down. I have a. VPN to my home system, which doesn't respond if you're on the network (if that make sense).

                              As soon as I disconnected from the VPN, bingo. Soooooo need to either sort out the VPN from local (which seems daft) or get some automatic disconnect.

                              C

                              therealdbT Offline
                              therealdbT Offline
                              therealdb
                              wrote on last edited by
                              #47

                              @catmanv2 that's why I'm publishing to an http endpoint that's relaying the message inside my mqtt server (internal). Maybe a public mqtt broker linked to your internal one is easier.

                              --
                              On a mission to automate everything.

                              My MS Reactor contrib
                              My Luup Plug-ins

                              CatmanV2C 1 Reply Last reply
                              1
                              • therealdbT therealdb

                                @catmanv2 that's why I'm publishing to an http endpoint that's relaying the message inside my mqtt server (internal). Maybe a public mqtt broker linked to your internal one is easier.

                                CatmanV2C Offline
                                CatmanV2C Offline
                                CatmanV2
                                wrote on last edited by
                                #48

                                @therealdb thing is I know from other apps that when the phone transitions from 4(5)G to WiFi and is connected on the VPN it loses connectivity. I knew this intellectually but now I know it in my bones as it were.

                                So it won't talk to the HTTP endpoint either...... It won't talk to anything.

                                I've seen it often enough with mail and Slack but never really added two and two

                                C

                                The Ex-Vera abuser know as CatmanV2.....

                                1 Reply Last reply
                                0
                                • T Offline
                                  T Offline
                                  tamorgen
                                  wrote on last edited by tamorgen
                                  #49

                                  It’s funny, back in August there was an issue with iPhoneLocator. It was an add-on integration that I couldn’t live without. It fixed itself magically after 3 or 4 days, but it put me on the road to looking for a Vera alternative.

                                  Ezlo kept making promises, but I felt like I was going to be kept being strung along if I switched to Ezlo. It felt like they were stringing users along with basic functionality, like geofencing.

                                  In September I switched to Home Assistant, and I haven’t looked back. Everything works so much better. The built in geofencing of the companion app works flawlessly. I have four users, that just needed an account on my instance, and I know if they are home or not, and I can depend on it for my automation.

                                  Integrations that stopped working or worked unreliably on Vera years ago work perfectly. My Nest thermostat works again with my home automation. I can use Google Calendar with ease.

                                  Not to disparage Vera for the innovation they did years ago, but for anyone still on the platform, run! Vera has essentially been abandoned

                                  G CatmanV2C 2 Replies Last reply
                                  0
                                  • T tamorgen

                                    It’s funny, back in August there was an issue with iPhoneLocator. It was an add-on integration that I couldn’t live without. It fixed itself magically after 3 or 4 days, but it put me on the road to looking for a Vera alternative.

                                    Ezlo kept making promises, but I felt like I was going to be kept being strung along if I switched to Ezlo. It felt like they were stringing users along with basic functionality, like geofencing.

                                    In September I switched to Home Assistant, and I haven’t looked back. Everything works so much better. The built in geofencing of the companion app works flawlessly. I have four users, that just needed an account on my instance, and I know if they are home or not, and I can depend on it for my automation.

                                    Integrations that stopped working or worked unreliably on Vera years ago work perfectly. My Nest thermostat works again with my home automation. I can use Google Calendar with ease.

                                    Not to disparage Vera for the innovation they did years ago, but for anyone still on the platform, run! Vera has essentially been abandoned

                                    G Offline
                                    G Offline
                                    gwp1
                                    wrote on last edited by gwp1
                                    #50

                                    @tamorgen If you're using Home Assistant look into iCloud3. It replaces the native iCloud integration and is much, much more reliable. You can find it in HACS.

                                    Oh - and the level of detail you can pull into MSR is wonderful.

                                    *Hubitat C-7 2.4.1.177
                                    *Proxmox VE v8, Beelink MiniPC 12GBs, SSD

                                    *HASS 2025.6.0
                                    w/ ZST10-700 fw 7.18.3

                                    *Prod MSR in docker/portainer
                                    MSR: latest-25139-fbd67abc
                                    MQTTController: 25139
                                    ZWave Controller: 25139

                                    T 1 Reply Last reply
                                    0
                                    • G gwp1

                                      @tamorgen If you're using Home Assistant look into iCloud3. It replaces the native iCloud integration and is much, much more reliable. You can find it in HACS.

                                      Oh - and the level of detail you can pull into MSR is wonderful.

                                      T Offline
                                      T Offline
                                      tamorgen
                                      wrote on last edited by
                                      #51

                                      @gwp1 said in iPhone location or alternative.:

                                      @tamorgen If you're using Home Assistant look into iCloud3. It replaces the native iCloud integration and is much, much more reliable. You can find it in HACS.

                                      Oh - and the level of detail you can pull into MSR is wonderful.

                                      I did try it for a while, but I kept getting annoying emails from Apple that my iCloud account was signed into. There is a ton of detail on it, but frankly, all I needed to know was whether a particular user was at my home or not. The companion app works perfectly well for that simple task

                                      G 1 Reply Last reply
                                      1
                                      • T tamorgen

                                        @gwp1 said in iPhone location or alternative.:

                                        @tamorgen If you're using Home Assistant look into iCloud3. It replaces the native iCloud integration and is much, much more reliable. You can find it in HACS.

                                        Oh - and the level of detail you can pull into MSR is wonderful.

                                        I did try it for a while, but I kept getting annoying emails from Apple that my iCloud account was signed into. There is a ton of detail on it, but frankly, all I needed to know was whether a particular user was at my home or not. The companion app works perfectly well for that simple task

                                        G Offline
                                        G Offline
                                        gwp1
                                        wrote on last edited by
                                        #52

                                        @tamorgen I found the trick of triggering from iC3's zone_name within MSR virtually eliminates false GPS drift from suddenly shutting my house down around me only to open it back up again when it course-corrects.

                                        I don't get those emails - I think I did initially and don't recall what I did to stop them. iCloud does, now and then, force a reconfirmation dialogue but that's easy 2FA stuff.

                                        *Hubitat C-7 2.4.1.177
                                        *Proxmox VE v8, Beelink MiniPC 12GBs, SSD

                                        *HASS 2025.6.0
                                        w/ ZST10-700 fw 7.18.3

                                        *Prod MSR in docker/portainer
                                        MSR: latest-25139-fbd67abc
                                        MQTTController: 25139
                                        ZWave Controller: 25139

                                        T 1 Reply Last reply
                                        0
                                        • T tamorgen

                                          It’s funny, back in August there was an issue with iPhoneLocator. It was an add-on integration that I couldn’t live without. It fixed itself magically after 3 or 4 days, but it put me on the road to looking for a Vera alternative.

                                          Ezlo kept making promises, but I felt like I was going to be kept being strung along if I switched to Ezlo. It felt like they were stringing users along with basic functionality, like geofencing.

                                          In September I switched to Home Assistant, and I haven’t looked back. Everything works so much better. The built in geofencing of the companion app works flawlessly. I have four users, that just needed an account on my instance, and I know if they are home or not, and I can depend on it for my automation.

                                          Integrations that stopped working or worked unreliably on Vera years ago work perfectly. My Nest thermostat works again with my home automation. I can use Google Calendar with ease.

                                          Not to disparage Vera for the innovation they did years ago, but for anyone still on the platform, run! Vera has essentially been abandoned

                                          CatmanV2C Offline
                                          CatmanV2C Offline
                                          CatmanV2
                                          wrote on last edited by
                                          #53

                                          @tamorgen said in iPhone location or alternative.:

                                          It’s funny, back in August there was an issue with iPhoneLocator. It was an add-on integration that I couldn’t live without. It fixed itself magically after 3 or 4 days, but it put me on the road to looking for a Vera alternative.

                                          Ezlo kept making promises, but I felt like I was going to be kept being strung along if I switched to Ezlo. It felt like they were stringing users along with basic functionality, like geofencing.

                                          In September I switched to Home Assistant, and I haven’t looked back. Everything works so much better. The built in geofencing of the companion app works flawlessly. I have four users, that just needed an account on my instance, and I know if they are home or not, and I can depend on it for my automation.

                                          Integrations that stopped working or worked unreliably on Vera years ago work perfectly. My Nest thermostat works again with my home automation. I can use Google Calendar with ease.

                                          Not to disparage Vera for the innovation they did years ago, but for anyone still on the platform, run! Vera has essentially been abandoned

                                          Thread merge! 🙂

                                          C

                                          The Ex-Vera abuser know as CatmanV2.....

                                          1 Reply Last reply
                                          0
                                          Reply
                                          • Reply as topic
                                          Log in to reply
                                          • Oldest to Newest
                                          • Newest to Oldest
                                          • Most Votes


                                          Recent Topics

                                          • Gradually turn on lights.
                                            G
                                            gwp1
                                            0
                                            4
                                            144

                                          • Stop the MSR by an external switch on Hubitat.
                                            wmarcolinW
                                            wmarcolin
                                            0
                                            1
                                            38

                                          • Error After Upgrade
                                            G
                                            gwp1
                                            0
                                            4
                                            106

                                          • Reset attribute value of entity in event handler
                                            R
                                            RHCPNG
                                            0
                                            5
                                            209

                                          • Need help figuring out how to delay a reset on reaction
                                            G
                                            gwp1
                                            0
                                            22
                                            931

                                          • Way to search for rules (rule state) in other rules
                                            T
                                            tamorgen
                                            0
                                            3
                                            104

                                          • Links to MSR from HA
                                            Tom_DT
                                            Tom_D
                                            0
                                            1
                                            93

                                          • Set Reaction > Script Action
                                            wmarcolinW
                                            wmarcolin
                                            0
                                            11
                                            439

                                          • Wiring Samotech SM308-S into light fitting
                                            akbooerA
                                            akbooer
                                            0
                                            2
                                            152

                                          • Errors after updating to MQTTController build 25139
                                            toggledbitsT
                                            toggledbits
                                            0
                                            6
                                            242

                                          • 🎉 My very first MSR controller: OpenSprinkler
                                            therealdbT
                                            therealdb
                                            5
                                            13
                                            920

                                          • Advice reqeusted to migrate MSR from Bare Metal to Container
                                            T
                                            tamorgen
                                            0
                                            5
                                            264
                                          Powered by NodeBB | Contributors
                                          Hosted freely by 10RUPTiV - Solutions Technologiques | Contact us
                                          • Login

                                          • Don't have an account? Register

                                          • Login or register to search.
                                          • First post
                                            Last post
                                          0
                                          • Categories
                                          • Recent
                                          • Tags
                                          • Popular
                                          • Unsolved