Skip to content
  • Categories
  • Recent
  • Tags
  • Popular
  • Unsolved
Collapse
Discussion Forum to share and further the development of home control and automation, independent of platforms.
  1. Home
  2. Software
  3. Multi-System Reactor
  4. [Resolved] Day mode implementation question
Script action and custom timers
therealdbT
Sorry to write here without trying, but I’m flying today. Am I correct if i say that script action with alarm() makes it possible to execute a reaction in a given interval, lets say 15 seconds or 3.5 minutes? That sounds amazing, since I’ve used weird tricks, including a custom controller, just to do this.
Multi-System Reactor
Requesting a proper ARM64/aarch64 Docker image (Pi 5 support)
M
Hi, I'm in the process of migrating from a Raspberry Pi 4 (ARMv7) to a Raspberry Pi 5 (ARMv8/aarch64), but I’ve run into an issue: there is no proper ARMv8/aarch64 image available. None of the existing images run on the Pi 5 - they all exit immediately with code 139 (segmentation fault), which typically indicates that the binaries inside the image are not compatible with the ARM64/aarch64 architecture used by the Pi 5. Would it be possible to publish a correct ARMv8/aarch64 (linux/arm64) image? Building one should be relatively straightforward using docker buildx with multi-arch support. For example, my own Node.js images are built this way: docker buildx build --push \ -t <localrepo>/<project>:<tag> \ --platform=linux/arm64,linux/amd64 \ --file ./apps/<project>/Dockerfile . This produces both the AMD64 and ARM64/v8 variants automatically. Also, as a side note, it may be best to avoid using Alpine as the base image for the ARM64 build, since musl-based builds often cause compatibility issues and unnecessary headaches. A glibc-based base image (e.g., Debian or Ubuntu) tends to work far more reliably on ARM64, especially for Node.js applications. @toggledbits - tagging you in case you missed this. Thanks, mgvra
Multi-System Reactor
Help resolve change in behaviour post update
CatmanV2C
Topic thumbnail image
Multi-System Reactor
Reactor (Multi-System/Multi-Hub) Announcements
toggledbitsT
Build 21228 has been released. Docker images available from DockerHub as usual, and bare-metal packages here. Home Assistant up to version 2021.8.6 supported; the online version of the manual will now state the current supported versions; Fix an error in OWMWeatherController that could cause it to stop updating; Unify the approach to entity filtering on all hub interface classes (controllers); this works for device entities only; it may be extended to other entities later; Improve error detail in messages for EzloController during auth phase; Add isRuleSet() and isRuleEnabled() functions to expressions extensions; Implement set action for lock and passage capabilities (makes them more easily scriptable in some cases); Fix a place in the UI where 24-hour time was not being displayed.
Multi-System Reactor
Reactor w/HA 2025.11 error on set_datetime service call setting only time
CrilleC
@toggledbits Do you know if this is related to that PR or is it a change they made in 2025.11.1? [latest-25310]2025-11-11T13:16:24.319Z <HassController:INFO> HassController#hass perform x_hass_input_datetime.set_datetime on Entity#hass>input_datetime_vvb_dag with { "time": "10:45" } [latest-25310]2025-11-11T13:16:24.320Z <HassController:INFO> HassController#hass: sending payload for x_hass_input_datetime.set_datetime on Entity#hass>input_datetime_vvb_dag action: { "type": "call_service", "service_data": { "date": (null), "time": "10:45", "datetime": (null), "timestamp": (null) }, "domain": "input_datetime", "service": "set_datetime", "target": { "entity_id": "input_datetime.vvb_dag" } } [latest-25310]2025-11-11T13:16:24.321Z <HassController:ERR> HassController#hass request 1762866984320<2025-11-11 14:16:24> (call_service) failed: [Error] Not a parseable type for dictionary value @ data['date'] [-] [latest-25310]2025-11-11T13:16:24.321Z <HassController:WARN> HassController#hass action x_hass_input_datetime.set_datetime({ "time": "10:45" }) on Entity#hass>input_datetime_vvb_dag failed! [latest-25310]2025-11-11T13:16:24.321Z <HassController:INFO> Service call payload: {"type":"call_service","service_data":{"date":null,"time":"10:45","datetime":null,"timestamp":null},"domain":"input_datetime","service":"set_datetime","target":{"entity_id":"input_datetime.vvb_dag"},"id":1762866984320} [latest-25310]2025-11-11T13:16:24.322Z <HassController:INFO> Service data: {"fields":{"date":{"example":"\"2019-04-20\"","selector":{"text":{"multiline":false,"multiple":false}}},"time":{"example":"\"05:04:20\"","selector":{"time":{}}},"datetime":{"example":"\"2019-04-20 05:04:20\"","selector":{"text":{"multiline":false,"multiple":false}}},"timestamp":{"selector":{"number":{"min":0,"max":9223372036854776000,"mode":"box","step":1}}}},"target":{"entity":[{"domain":["input_datetime"]}]}} [latest-25310]2025-11-11T13:16:24.322Z <Engine:ERR> Engine#1 reaction rule-mgb8pfhs:S step 0 perform x_hass_input_datetime.set_datetime failed: [Error] Not a parseable type for dictionary value @ data['date'] [-] [latest-25310]2025-11-11T13:16:24.322Z <Engine:INFO> Engine#1 action args: { "time": "10:45" } [latest-25310]2025-11-11T13:16:24.322Z <Engine:INFO> Resuming reaction Sätt Schema VVB i Home Assistant<AKTIV> (rule-mgb8pfhs:S) from step 1 [latest-25310]2025-11-11T13:16:24.323Z <HassController:INFO> HassController#hass perform x_hass_input_datetime.set_datetime on Entity#hass>input_datetime_vvb_natt with { "time": "03:00", "timestamp": 0 } [latest-25310]2025-11-11T13:16:24.323Z <HassController:INFO> HassController#hass: sending payload for x_hass_input_datetime.set_datetime on Entity#hass>input_datetime_vvb_natt action: { "type": "call_service", "service_data": { "date": (null), "time": "03:00", "datetime": (null), "timestamp": 0 }, "domain": "input_datetime", "service": "set_datetime", "target": { "entity_id": "input_datetime.vvb_natt" } } [latest-25310]2025-11-11T13:16:24.324Z <HassController:ERR> HassController#hass request 1762866984323<2025-11-11 14:16:24> (call_service) failed: [Error] Not a parseable type for dictionary value @ data['date'] [-] [latest-25310]2025-11-11T13:16:24.324Z <HassController:WARN> HassController#hass action x_hass_input_datetime.set_datetime({ "time": "03:00", "timestamp": 0 }) on Entity#hass>input_datetime_vvb_natt failed! [latest-25310]2025-11-11T13:16:24.324Z <HassController:INFO> Service call payload: {"type":"call_service","service_data":{"date":null,"time":"03:00","datetime":null,"timestamp":0},"domain":"input_datetime","service":"set_datetime","target":{"entity_id":"input_datetime.vvb_natt"},"id":1762866984323} [latest-25310]2025-11-11T13:16:24.324Z <HassController:INFO> Service data: {"fields":{"date":{"example":"\"2019-04-20\"","selector":{"text":{"multiline":false,"multiple":false}}},"time":{"example":"\"05:04:20\"","selector":{"time":{}}},"datetime":{"example":"\"2019-04-20 05:04:20\"","selector":{"text":{"multiline":false,"multiple":false}}},"timestamp":{"selector":{"number":{"min":0,"max":9223372036854776000,"mode":"box","step":1}}}},"target":{"entity":[{"domain":["input_datetime"]}]}} [latest-25310]2025-11-11T13:16:24.324Z <Engine:ERR> Engine#1 reaction rule-mgb8pfhs:S step 1 perform x_hass_input_datetime.set_datetime failed: [Error] Not a parseable type for dictionary value @ data['date'] [-] [latest-25310]2025-11-11T13:16:24.324Z <Engine:INFO> Engine#1 action args: { "time": "03:00", "timestamp": 0 } [latest-25310]2025-11-11T13:16:24.325Z <Engine:INFO> Resuming reaction Sätt Schema VVB i Home Assistant<AKTIV> (rule-mgb8pfhs:S) from step 2 [latest-25310]2025-11-11T13:16:24.325Z <Engine:INFO> Sätt Schema VVB i Home Assistant<AKTIV> all actions completed.
Multi-System Reactor
Reactor Version 25310 : Office Light control via rule in reactor no longer working since last update.
P
Hello, I currently have an office light (connected via a Leviton Zwave Dimmer switch) controlled from a Gen5 Aeotech Zwave switch installed on my Synology 720+ NAS. I run HA(2025.11.10) in a virtual machine from my NAS and Reactor on the container manager of the same NAS. Prior to updating to 25304 the rule I had set to turn the light on to a specific dimming value worked correctly. Now the rule appears to follow the decision tree, however the reaction does not trigger setting the dimming or turning on the office light? Strangely I can still turn the light on and off as well as dim it directly from HASS..? I have tried using the ''try this action'' button in the rules reaction setting and it will not control the light and does not throw an error flagÉ Please help, P.S Reactor has been rock steady for me over the last few years and I'm a big fan of this solution.
Multi-System Reactor
[Solved] alarm() in global expression throws error in log.
CrilleC
Topic thumbnail image
Multi-System Reactor
[Solved] Define function issue in latest-25304
CrilleC
Topic thumbnail image
Multi-System Reactor
No Upgrade Notification for Build 25308?
CatmanV2C
FWIW I'm no longer getting a notification from MSR that there's an update. Just thought I'd mention it C
Multi-System Reactor
Strange behavior in MSR latest-25304 with disabled groups in Reaction
therealdbT
Topic thumbnail image
Multi-System Reactor
[Reactor] Variables not updating correctly in latest-25201-2aa18550
therealdbT
Topic thumbnail image
Multi-System Reactor
The reaction stopped working (Google Nest max playing a video)
F
Topic thumbnail image
Multi-System Reactor
Handling Dead Entities and Renamed Entities
PablaP
Hello all.. been a minute! I recently rebuilt my Z wave network and migrated to a new z wave stick. In order to prevent any downtime I kept my original z wave network up and ran a docker version of Z Wave JS UI with my new controller. This way I could add device by device without having any devices down. I finally moved all the devices over to my new stick today. The final step was to migrate everything from my Docker instance of Z Wave JS UI to the HA add-on of Z Wave JS UI. However during this migration some of the names didn't populate correctly which I later managed to import back into Z Wave JS UI. The issue was in Reactor it is stuck on the default names and the entities are not updating. I removed the controller from Reactor, restarted, hard refreshed, and added the controller back however the new entity names have not updated. Also it seems like the old entities from my previous instance of Z Wave JS UI are lingering and not being marked as dead (I believe a certain amount of time needs to lapse before they're marked as dead in Reactor). My goal is to basically purge all the entities for the 'ZWaveJS' controller in Reactor so it can pull all the updated entity names and only the entities that exist in Z Wave JS UI. I cannot find a quick way to do this, I know entities can be deleted one by one, but with over 100 entities this would take long I am guessing that if I added the controller with a new name in in the Reactor config it would pull the updated entities and names but I think that would break my rules since the entity IDs would change (I made sure to name all the entities the exact same as they were previously to prevent this issue).
Multi-System Reactor
Strange behavior for MQTT templates using payload and attributes
therealdbT
Topic thumbnail image
Multi-System Reactor
[MSR] reactor-mqtt-contrib package for additional MQTT templates
therealdbT
I'm slowly migrating all my stuff to MQTT under MSR, so I have a central place to integrate everything (and, in a not-so-distant future, to remove virtual devices from my Vera and leave it running zwave only). Anyway, here's my reactor-mqtt-contrib package: https://github.com/dbochicchio/reactor-mqtt-contrib Simply download yaml files (everything or just the ones you need) and you're good to go. I have mapped my most useful devices, but I'll add others soon. Feel free to ask for specific templates, since I've worked a lot in the last weeks to understand and operate them. The templates are supporting both init and query, so you have always up-to-date devices at startup, and the ability to poll them. Online status is supported as well, so you can get disconnected devices with a simple expression. Many-many thanks to @toggledbits for its dedication, support, and patience with me and my requests
Multi-System Reactor
HA 2025.9.4 Supported Yet?
CatmanV2C
Tangentially did I miss 2025.9.4 getting blessed in MSR? I've been holding off Cheers C
Multi-System Reactor
Rule Set UI bug - RESOLVED
3
Topic thumbnail image
Multi-System Reactor
[Reactor] Copy&Paste of Rules
therealdbT
I don't know if I'm the only one, but managing more than one Reactor installs, the need to have some sort of copy&paste for rules has grown on me. While I understand the technical challenges, I'm wondering if a "god mode" where I could copy the raw JSON rule and paste it into another rule could be an advanced, flag only feature that could benefit power users. I know I can copy the JSON file and proceed, but I must stop Reactor and when doing maintenance, it's more clicks to do. Just an idea
Multi-System Reactor
[Reactor] Help with scene controller cycling logic
therealdbT
I’ve added a couple of Shelly Wave i4 as scene controllers and I’m planning to add more, since I can just use standard buttons instead of battery-powered scene controllers, which also looks better aesthetically. That said, I’m struggling to figure out how to write a simple rule that cycles between states every time I press a button. Example: Light 1 ON → OFF, then Light 2 ON → OFF. The part I can’t get right is handling the case where Light 1 or Light 2 might already be ON independently of the rule. Maybe it’s just too much sun and relaxation clouding my brain, but any hint would be appreciated.
Multi-System Reactor
Stop the MSR by an external switch on Hubitat.
wmarcolinW
Use case: When performing home maintenance, such as air conditioning, I want all rules involving air conditioning to be disabled. To do this, to day, I have a virtual switch that I placed within all rules involving air conditioning, meaning that if I turn it off, none of them work. Then another situation: the water pump system and garden irrigation, another switch. In short, I had to create several virtual switches in Hubitat to disable rules in MSR. Unfortunately, however, I was unable to cover all scenarios, so I wondered if it would be possible for MSR to support a virtual MSR switch, which, when configured in the reactor settings, would function as a general on/off switch for MSR. If it is configured and turned off, the entire rules and actions in MSR stops working, except for the status change reading process, specifically for this switch, which, when turned on, would restart the MSR. Would it be possible to do something like this? Any recommendations from the experts?
Multi-System Reactor

[Resolved] Day mode implementation question

Scheduled Pinned Locked Moved Multi-System Reactor
31 Posts 5 Posters 2.4k Views 5 Watching
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • PablaP Offline
    PablaP Offline
    Pabla
    wrote on last edited by Pabla
    #4

    Hm okay lets see if I can help, I think I am understanding what you want. You could move the whole "Wake Up Times" rulset to the constraints section in your "Day" rule set and remove the "Wake Up Times is TRUE" condition from your triggers. This would only allow the day mode to be triggered if the constraints are also met.

    Then you can completely delete the "One of these" groups" and replace it with the condition of between sunrise and sunset. You won't have to worry about the rule going true during midnight since you added the time/day constraint which will only allow the rule to go true if it past 6:35am on a weekday or 7:30am on a weekend. I attached a screenshot of what the rule should look like to better help.

    This layout will work like this:

    Triggers:

    • Your house should NOT be in Vacation, Guest or Night mode
    • AND the time should be within Sunrise and Sunset
    • AND one of the phones should be present (I know you only showed one device but I am assuming you will add others, hence the 'or' subgroup)

    Constraints:

    • All this can only go true if it is it past 6:35am on a weekday or 7:30am on a weekend

    efeeae5c-f420-4862-b07f-aea7a2b29564-image.png

    1 Reply Last reply
    0
    • toggledbitsT Offline
      toggledbitsT Offline
      toggledbits
      wrote on last edited by toggledbits
      #5

      @gwp1 I don't understand all the complexity around the Day rule looking at sunrise and wake up times. I think what you are describing is that you want Day to start at the earlier of sunrise or your wake-up time, and that's a simple OR condition: Wake Up Times is true OR time is after sunrise. And the period before from midnight to either has nothing to do with that and isn't a consideration.

      Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

      G 3 Replies Last reply
      1
      • toggledbitsT toggledbits

        @gwp1 I don't understand all the complexity around the Day rule looking at sunrise and wake up times. I think what you are describing is that you want Day to start at the earlier of sunrise or your wake-up time, and that's a simple OR condition: Wake Up Times is true OR time is after sunrise. And the period before from midnight to either has nothing to do with that and isn't a consideration.

        G Offline
        G Offline
        gwp1
        wrote on last edited by gwp1
        #6

        @toggledbits Oy. I don't know how I missed that. I am embarassed.

        In my defense, I do have a history of designing rules much harder than they need to be. I tell myself "think edge" but still try to circle everything instead.

        Guessing for Evening the recommendation would be after sunset vs between sunset/sunrise?

        @Pabla the OR is there for future state... waiting on an update to iCloud3 in HASS that will allow triggering from the presence of my Apple Watch as well as iPhone for those times when it's a quick trip out and I let the Ultra do the work vs carrying the phone, too (think workout, bike ride, etc.)

        1 Reply Last reply
        0
        • toggledbitsT toggledbits

          @gwp1 I don't understand all the complexity around the Day rule looking at sunrise and wake up times. I think what you are describing is that you want Day to start at the earlier of sunrise or your wake-up time, and that's a simple OR condition: Wake Up Times is true OR time is after sunrise. And the period before from midnight to either has nothing to do with that and isn't a consideration.

          G Offline
          G Offline
          gwp1
          wrote on last edited by
          #7
          This post is deleted!
          1 Reply Last reply
          0
          • toggledbitsT toggledbits

            @gwp1 I don't understand all the complexity around the Day rule looking at sunrise and wake up times. I think what you are describing is that you want Day to start at the earlier of sunrise or your wake-up time, and that's a simple OR condition: Wake Up Times is true OR time is after sunrise. And the period before from midnight to either has nothing to do with that and isn't a consideration.

            G Offline
            G Offline
            gwp1
            wrote on last edited by gwp1
            #8

            @toggledbits had to mess about with some mode additions/removals and changed sunrise/sunset to between to make this work as at sunset both Day and Evening modes were valid at sunset.

            753fa5d3-b693-4a2f-adb6-889fd8d3114b-image.png

            Would this be better served as is or by adding this under Constraints?

            1 Reply Last reply
            0
            • toggledbitsT Offline
              toggledbitsT Offline
              toggledbits
              wrote on last edited by toggledbits
              #9

              Depends entirely on what the actions are, and when you want them to run. I'm assuming it just sets mode to Day. If the mode changed during the day, would you want it changed back to Day? Trigger.

              Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

              G 2 Replies Last reply
              0
              • toggledbitsT toggledbits

                Depends entirely on what the actions are, and when you want them to run. I'm assuming it just sets mode to Day. If the mode changed during the day, would you want it changed back to Day? Trigger.

                G Offline
                G Offline
                gwp1
                wrote on last edited by
                #10

                @toggledbits Yep, absolutely - if I leave during the day mode shifts to Away - returning home the expectation would be a return to Day if still before sunset. Same with Evening if after sunset.

                1 Reply Last reply
                1
                • toggledbitsT toggledbits

                  Depends entirely on what the actions are, and when you want them to run. I'm assuming it just sets mode to Day. If the mode changed during the day, would you want it changed back to Day? Trigger.

                  G Offline
                  G Offline
                  gwp1
                  wrote on last edited by gwp1
                  #11

                  I continue to wrestle with modes. Changing Wake-up and Sunrise to after in Day resulted in a battle between Day and Evening in the later hours as both were "valid" after sunset given the OR in Day

                  I've modified Wake-up to start at the two wake times, 0630 ET and 0730 ET, and end before 12noon ET. This closes it off from arguing at sunset.

                  2cfdf9c6-2018-49ba-971a-3b32f3884ac9-image.png

                  Day currently reads as such now:

                  • I must be home (can this be addressed better by "mode != Away"?)
                  • It must be after wake-up times OR after sunset sunrise, whichever comes first
                  • must be ignored if in Vacation (I'm away for extended period) or Guest (someone specific is checking on the house whilst I'm on vaca)

                  7b094e16-e40f-4266-90d4-ab578486832f-image.png

                  Evening

                  • should kick in after Sunset
                  • I must be home (again, can this be driven by mode != Away better?)
                    must be ignored if in Vacation (I'm away for extended period) or Guest (someone specific is checking on the house whilst I'm on vaca)

                  bed37190-98d0-4fc1-9824-4941e50bbaef-image.png

                  Night is set manually, ie not on a schedule. Two ways it can be set, the more basic is via voice command to Amazon Echo device that flips a virtual switch which triggers mode.

                  The second is more complex but still manual:

                  • phone must be in master bedroom
                  • phone must be charging for > 00:00:10 (so lockdown can be aborted if needed)
                  • can only be triggered if the above triggers happen whilst in Evening or Work (awakened in the middle of the night for a work thing and returning to sleep). If I happen to charge the phone during the day the house shouldn't lock down in Night mode.

                  0c0a6f03-f12e-4a21-8d73-3cdb56b28f08-image.png

                  I put this out there because I have a tendency (ok, more than a tendency) to overthink and over-complicate my rules as @toggledbits will confirm. This results in unnecessary demand on MSR as well as rules fighting with rules or duplicating outcomes.

                  CatmanV2C 1 Reply Last reply
                  0
                  • G gwp1

                    I continue to wrestle with modes. Changing Wake-up and Sunrise to after in Day resulted in a battle between Day and Evening in the later hours as both were "valid" after sunset given the OR in Day

                    I've modified Wake-up to start at the two wake times, 0630 ET and 0730 ET, and end before 12noon ET. This closes it off from arguing at sunset.

                    2cfdf9c6-2018-49ba-971a-3b32f3884ac9-image.png

                    Day currently reads as such now:

                    • I must be home (can this be addressed better by "mode != Away"?)
                    • It must be after wake-up times OR after sunset sunrise, whichever comes first
                    • must be ignored if in Vacation (I'm away for extended period) or Guest (someone specific is checking on the house whilst I'm on vaca)

                    7b094e16-e40f-4266-90d4-ab578486832f-image.png

                    Evening

                    • should kick in after Sunset
                    • I must be home (again, can this be driven by mode != Away better?)
                      must be ignored if in Vacation (I'm away for extended period) or Guest (someone specific is checking on the house whilst I'm on vaca)

                    bed37190-98d0-4fc1-9824-4941e50bbaef-image.png

                    Night is set manually, ie not on a schedule. Two ways it can be set, the more basic is via voice command to Amazon Echo device that flips a virtual switch which triggers mode.

                    The second is more complex but still manual:

                    • phone must be in master bedroom
                    • phone must be charging for > 00:00:10 (so lockdown can be aborted if needed)
                    • can only be triggered if the above triggers happen whilst in Evening or Work (awakened in the middle of the night for a work thing and returning to sleep). If I happen to charge the phone during the day the house shouldn't lock down in Night mode.

                    0c0a6f03-f12e-4a21-8d73-3cdb56b28f08-image.png

                    I put this out there because I have a tendency (ok, more than a tendency) to overthink and over-complicate my rules as @toggledbits will confirm. This results in unnecessary demand on MSR as well as rules fighting with rules or duplicating outcomes.

                    CatmanV2C Offline
                    CatmanV2C Offline
                    CatmanV2
                    wrote on last edited by
                    #12

                    @gwp1 said in Day mode implementation question:

                    It must be after wake-up times OR after sunset, whichever comes first

                    I suspect you mean 'Sunrise'?

                    C

                    The Ex-Vera abuser know as CatmanV2.....

                    G 1 Reply Last reply
                    0
                    • CatmanV2C CatmanV2

                      @gwp1 said in Day mode implementation question:

                      It must be after wake-up times OR after sunset, whichever comes first

                      I suspect you mean 'Sunrise'?

                      C

                      G Offline
                      G Offline
                      gwp1
                      wrote on last edited by
                      #13

                      @catmanv2 Egad, yes. Edited. Thank you!

                      1 Reply Last reply
                      1
                      • PablaP Offline
                        PablaP Offline
                        Pabla
                        wrote on last edited by
                        #14

                        In your "Day" ruleset for sunrise/sunset condition set the sunset condition to be a few minutes before sunset. This way both sunset conditions in "Day" and "Evening" won't go true at the same time. Alternatively you could also add a condition in the "Day" rule that the "Evening" rule must be false . This will make sure "Day" can't be true at the same time as "Evening".

                        G 1 Reply Last reply
                        0
                        • PablaP Pabla

                          In your "Day" ruleset for sunrise/sunset condition set the sunset condition to be a few minutes before sunset. This way both sunset conditions in "Day" and "Evening" won't go true at the same time. Alternatively you could also add a condition in the "Day" rule that the "Evening" rule must be false . This will make sure "Day" can't be true at the same time as "Evening".

                          G Offline
                          G Offline
                          gwp1
                          wrote on last edited by
                          #15

                          @pabla Add a specific condition for Evening = false or add it to this existing condition in Day:

                          051ce098-67ba-4607-af44-0dfe9a3620c5-image.png

                          PablaP 1 Reply Last reply
                          0
                          • G gwp1

                            @pabla Add a specific condition for Evening = false or add it to this existing condition in Day:

                            051ce098-67ba-4607-af44-0dfe9a3620c5-image.png

                            PablaP Offline
                            PablaP Offline
                            Pabla
                            wrote on last edited by
                            #16

                            @gwp1 On second thought I would just add the offset to the sunset time in the "Day" rule. Its less of a band-aid solution.

                            G 1 Reply Last reply
                            1
                            • PablaP Pabla

                              @gwp1 On second thought I would just add the offset to the sunset time in the "Day" rule. Its less of a band-aid solution.

                              G Offline
                              G Offline
                              gwp1
                              wrote on last edited by
                              #17

                              @pabla Updated to:

                              653806ff-6383-4f86-8eea-fd3405ba38a5-image.png

                              1 Reply Last reply
                              0
                              • PablaP Offline
                                PablaP Offline
                                Pabla
                                wrote on last edited by Pabla
                                #18

                                Yeaup that should do the trick, what basically was happening as you said was the sunset conditions in both Day and Evening were true at the same time therefore causing the both rules to be true as well.

                                Now that you added the 1 mins before sunset, they won't overlap.

                                G 1 Reply Last reply
                                0
                                • PablaP Pabla

                                  Yeaup that should do the trick, what basically was happening as you said was the sunset conditions in both Day and Evening were true at the same time therefore causing the both rules to be true as well.

                                  Now that you added the 1 mins before sunset, they won't overlap.

                                  G Offline
                                  G Offline
                                  gwp1
                                  wrote on last edited by
                                  #19

                                  @pabla It should eliminate any race state. The original config was to have "Wake-up" and "sun" both use after but that created a mess alongside Evening as everything ran to midnight together.

                                  1 Reply Last reply
                                  0
                                  • therealdbT Offline
                                    therealdbT Offline
                                    therealdb
                                    wrote on last edited by
                                    #20

                                    I don't known why you're all setting a mode like this, but I'm still using home/away/night to drive my rules, plus a lot of flags (dark, sleeping, holiday, party, mute, green mode, solar, rainy, windy, bad weather) to combine all them together and drive my reactions. I'm curious to understand why you prefer this approach.

                                    --
                                    On a mission to automate everything.

                                    My MS Reactor contrib
                                    My Luup Plug-ins

                                    PablaP G 2 Replies Last reply
                                    0
                                    • therealdbT therealdb

                                      I don't known why you're all setting a mode like this, but I'm still using home/away/night to drive my rules, plus a lot of flags (dark, sleeping, holiday, party, mute, green mode, solar, rainy, windy, bad weather) to combine all them together and drive my reactions. I'm curious to understand why you prefer this approach.

                                      PablaP Offline
                                      PablaP Offline
                                      Pabla
                                      wrote on last edited by
                                      #21

                                      @therealdb My house modes are simple: Night/Home/Away/Vacation. All them are configured very simply, based on if the alarm is turned on (either stay or away) and who's home. That way there is no accidental/unexpected mode changes

                                      G 1 Reply Last reply
                                      0
                                      • therealdbT therealdb

                                        I don't known why you're all setting a mode like this, but I'm still using home/away/night to drive my rules, plus a lot of flags (dark, sleeping, holiday, party, mute, green mode, solar, rainy, windy, bad weather) to combine all them together and drive my reactions. I'm curious to understand why you prefer this approach.

                                        G Offline
                                        G Offline
                                        gwp1
                                        wrote on last edited by
                                        #22

                                        @therealdb said in Day mode implementation question:

                                        still using home/away/night to drive my rules, plus a lot of flags (dark, sleeping, holiday, party, mute, green mode, solar, rainy, windy, bad weather) to combine all them together and drive my reactions.

                                        This is exactly what I'm driving at. I use Mode followed by a number of what I call "shared rules" (Wake-up times, cloudy day, temp < 40º, presence, etc.) that can be/are referenced in many other rulesets. Where I'm hitting my wall is the actual triggering of the modes (Day, Away, Evening, Night).

                                        My curiosity is around how you're actually triggering the modes themselves. The rest... I've got that nailed down.

                                        therealdbT 1 Reply Last reply
                                        0
                                        • PablaP Pabla

                                          @therealdb My house modes are simple: Night/Home/Away/Vacation. All them are configured very simply, based on if the alarm is turned on (either stay or away) and who's home. That way there is no accidental/unexpected mode changes

                                          G Offline
                                          G Offline
                                          gwp1
                                          wrote on last edited by gwp1
                                          #23

                                          So I went back in time to when I first set modes up. Here's my current settings:

                                          b383c52d-84a6-43bd-bb3b-f298f25642f8-image.png

                                          3d099145-a298-4314-af18-d612321024c9-image.png

                                          53c7b6b5-eedb-40b6-a955-140c9ae469eb-image.png 9c58c5b8-bf57-474a-9fe8-d8c71d9c1200-image.png

                                          3827169b-c2e7-44f2-9d14-9b1d6f3764f7-image.png

                                          I will use Wake Up Times internally with other rulesets rather than trying to use it to drive at the higher Mode level. Presence will be in those rulesets as well.

                                          1 Reply Last reply
                                          0
                                          Reply
                                          • Reply as topic
                                          Log in to reply
                                          • Oldest to Newest
                                          • Newest to Oldest
                                          • Most Votes


                                          Recent Topics

                                          • Script action and custom timers
                                            toggledbitsT
                                            toggledbits
                                            0
                                            4
                                            65

                                          • Requesting a proper ARM64/aarch64 Docker image (Pi 5 support)
                                            toggledbitsT
                                            toggledbits
                                            1
                                            2
                                            33

                                          • Help resolve change in behaviour post update
                                            CatmanV2C
                                            CatmanV2
                                            0
                                            12
                                            206

                                          • Reactor (Multi-System/Multi-Hub) Announcements
                                            CatmanV2C
                                            CatmanV2
                                            5
                                            128
                                            72.7k

                                          • There is an alternative to homebridge-mqttthing
                                            akbooerA
                                            akbooer
                                            1
                                            2
                                            72

                                          • Reactor w/HA 2025.11 error on set_datetime service call setting only time
                                            CrilleC
                                            Crille
                                            0
                                            6
                                            73

                                          • Reactor Version 25310 : Office Light control via rule in reactor no longer working since last update.
                                            toggledbitsT
                                            toggledbits
                                            0
                                            17
                                            272

                                          • Shelly Wall Display XL
                                            akbooerA
                                            akbooer
                                            2
                                            9
                                            679

                                          • [Solved] alarm() in global expression throws error in log.
                                            toggledbitsT
                                            toggledbits
                                            0
                                            26
                                            473

                                          • [Solved] Define function issue in latest-25304
                                            CrilleC
                                            Crille
                                            0
                                            12
                                            350

                                          • No Upgrade Notification for Build 25308?
                                            toggledbitsT
                                            toggledbits
                                            0
                                            2
                                            84

                                          • Strange behavior in MSR latest-25304 with disabled groups in Reaction
                                            toggledbitsT
                                            toggledbits
                                            0
                                            2
                                            118
                                          Powered by NodeBB | Contributors
                                          Hosted freely by 10RUPTiV - Solutions Technologiques | Contact us
                                          • Login

                                          • Don't have an account? Register

                                          • Login or register to search.
                                          • First post
                                            Last post
                                          0
                                          • Categories
                                          • Recent
                                          • Tags
                                          • Popular
                                          • Unsolved