Skip to content
  • Categories
  • Recent
  • Tags
  • Popular
  • Unsolved
Collapse
Discussion Forum to share and further the development of home control and automation, independent of platforms.
  1. Home
  2. Software
  3. Multi-System Reactor
  4. [Resolved] Day mode implementation question
[Reactor] Help with screne controller cycling logic
therealdbT
I’ve added a couple of Shelly Wave i4 as scene controllers and I’m planning to add more, since I can just use standard buttons instead of battery-powered scene controllers, which also looks better aesthetically. That said, I’m struggling to figure out how to write a simple rule that cycles between states every time I press a button. Example: Light 1 ON → OFF, then Light 2 ON → OFF. The part I can’t get right is handling the case where Light 1 or Light 2 might already be ON independently of the rule. Maybe it’s just too much sun and relaxation clouding my brain, but any hint would be appreciated.
Multi-System Reactor
Stop the MSR by an external switch on Hubitat.
wmarcolinW
Use case: When performing home maintenance, such as air conditioning, I want all rules involving air conditioning to be disabled. To do this, to day, I have a virtual switch that I placed within all rules involving air conditioning, meaning that if I turn it off, none of them work. Then another situation: the water pump system and garden irrigation, another switch. In short, I had to create several virtual switches in Hubitat to disable rules in MSR. Unfortunately, however, I was unable to cover all scenarios, so I wondered if it would be possible for MSR to support a virtual MSR switch, which, when configured in the reactor settings, would function as a general on/off switch for MSR. If it is configured and turned off, the entire rules and actions in MSR stops working, except for the status change reading process, specifically for this switch, which, when turned on, would restart the MSR. Would it be possible to do something like this? Any recommendations from the experts?
Multi-System Reactor
[Reactor] Variables not updating correctly in latest-25201-2aa18550
therealdbT
Topic thumbnail image
Multi-System Reactor
Expose MSR entities
CatmanV2C
Probably a really dumb question. Currently I am using the owntracks_sensor for tracking phones being in region in MSR and it works great. Digging around with Home Assistant and toying with some dashboards, is there any way of exposing that sensor to HA trivially? I could set MSR to trip a virtual switch in OpenLuup which can then be exposed to HA (with all my other Vera devices) but that feels a bit in-elegant if I can do it directly. Any thoughts? Apologies if the ask is not clear/ TIA C
Multi-System Reactor
Comment in Globa Expressions
Tom_DT
I have several Global Expressions that are set by a rule so the definition area is blank. I'd like to add a comment in this area that explains what is setting the value. Commenting in this area breaks the remote setting. Any way to document what is setting the GE?
Multi-System Reactor
Unofficial thread for compatibility
tunnusT
As there are statements about compatibility for home assistant versions in MSR new version announcements (e.g. "HassController: Bless Hass to 2025.7.3"), I thought it would be good idea to track other controllers as well. As an example, I can confirm that build "latest-25208-c53e8513" works with Hubitat Elevation C-8 platform version 2.4.2.134 using Maker API.
Multi-System Reactor
Gradually turn on lights.
Tom_DT
I have several lights that I would like to turn on very gradually over 15 or 20 seconds. from 0 to .25 in .01 increments. I have tried a few things that came nowhere near working, so here I am.
Multi-System Reactor
Reactor (Multi-System/Multi-Hub) Announcements
toggledbitsT
Build 21228 has been released. Docker images available from DockerHub as usual, and bare-metal packages here. Home Assistant up to version 2021.8.6 supported; the online version of the manual will now state the current supported versions; Fix an error in OWMWeatherController that could cause it to stop updating; Unify the approach to entity filtering on all hub interface classes (controllers); this works for device entities only; it may be extended to other entities later; Improve error detail in messages for EzloController during auth phase; Add isRuleSet() and isRuleEnabled() functions to expressions extensions; Implement set action for lock and passage capabilities (makes them more easily scriptable in some cases); Fix a place in the UI where 24-hour time was not being displayed.
Multi-System Reactor
Can't customize home page
G
I foolishly let my system wipe all cookies this morning and with it my settings for my MSR home page. Once logged back in I can no longer remove errant panes nor is the + available to add new ones. Brave Browser v1.80.122 (Jul 16, 2025) What have I done?! Will check other browsers on my M1. UPDATE: Safari exhibits same behaviour. I've tried both sans last-four public key entry and with - no change.
Multi-System Reactor
Error After Upgrade
T
Topic thumbnail image
Multi-System Reactor
Reset attribute value of entity in event handler
R
Topic thumbnail image
Multi-System Reactor
Need help figuring out how to delay a reset on reaction
T
Topic thumbnail image
Multi-System Reactor
Way to search for rules (rule state) in other rules
T
@toggledbits, not sure if this is a feature request or I'm using the search tool wrong. You have a "Search for rule" in the Rules Set tab in MSR. It works nicely to find a rule and bring up said rule, but can it/could it be used for as a "where used?" global search? For instance, I have a fairly large set of rules, divided up into 10 different rulesets. There's easily a hundred individual rules, and many of the rules have Rule State triggers, which of course refer to other rules. Amongst my troubleshooting today, I came across what may have been a duplicate or troubleshooting attempt, but I can't tell if it's actually used as a Rule State in another rule without opening each rule that I suspect it may be a part of. Thanks.
Multi-System Reactor
Links to MSR from HA
Tom_DT
I am using Home Assistant a lot recently. On a dashboard showing the devices, I would like to show a link to the MSR rule that controls the devices. Is there a way to link directly into MSR?
Multi-System Reactor
Set Reaction > Script Action
wmarcolinW
Topic thumbnail image
Multi-System Reactor
Errors after updating to MQTTController build 25139
tunnusT
I'm running MSR build 25139 on Docker, using MQTT controller 24293, and everything working as expected. But if I try to upgrade to MQTTController build 25139, I'm getting the following errors on MSR UI: An Entity Attribute condition in "Lay-Z-Spa auto heating off" (Terrace) failed because the referenced entity "Lay-Z-Spa States" (mqtt>layzspa_states) does not have attribute value_sensor.god Last 11:20:37 An Entity Attribute condition in "Lay-Z-Spa auto heating off" (Terrace) failed because the referenced entity "Lay-Z-Spa States" (mqtt>layzspa_states) does not have attribute temperature_sensor.green Last 11:20:37 An Entity Attribute condition in "Lay-Z-Spa filter pump auto off" (Terrace) failed because the referenced entity "Lay-Z-Spa States" (mqtt>layzspa_states) does not have attribute temperature_sensor.red Last 11:20:37 An Entity Attribute condition in "Lay-Z-Spa filter pump auto run" (Terrace) failed because the referenced entity "Lay-Z-Spa States" (mqtt>layzspa_states) does not have attribute value_sensor.pump Last 11:20:37 An Entity Attribute condition in "Lay-Z-Spa watchdog" (Terrace) failed because the referenced entity "Lay-Z-Spa States" (mqtt>layzspa_states) does not have attribute value_sensor.status Last 11:20:37 My MQTT configuration (local_mqtt_devices.yaml) for the related entity is: layzspa_message: type: ValueSensor capabilities: ["temperature_sensor", "value_sensor", "power_sensor"] primary_attribute: power_sensor.value events: "layzspa/message": "power_sensor.value": json_payload: true if_expr: '! isnull( payload?.PWR )' expr: "float(payload.PWR)" "value_sensor.air": json_payload: true if_expr: '! isnull( payload?.AIR )' expr: "float(payload.AIR)" "value_sensor.pump": json_payload: true if_expr: '! isnull( payload?.FLT )' expr: "float(payload.FLT)" "value_sensor.god": json_payload: true if_expr: '! isnull( payload?.GOD )' expr: "float(payload.GOD)" "value_sensor.lock": json_payload: true if_expr: '! isnull( payload?.LCK )' expr: "float(payload.LCK)" "value_sensor.unit": json_payload: true if_expr: '! isnull( payload?.UNT )' expr: "float(payload.UNT)" "value_sensor.error": json_payload: true if_expr: '! isnull( payload?.ERR )' expr: "float(payload.ERR)" "temperature_sensor.green": json_payload: true if_expr: '! isnull( payload?.GRN )' expr: "float(payload.GRN)" "temperature_sensor.red": json_payload: true if_expr: '! isnull( payload?.RED )' expr: "float(payload.RED)" "temperature_sensor.target": json_payload: true if_expr: '! isnull( payload?.TGT )' expr: "float(payload.TGT)" "temperature_sensor.value": json_payload: true if_expr: '! isnull( payload?.TMP )' expr: "float(payload.TMP)" "temperature_sensor.virtual": json_payload: true if_expr: '! isnull( payload?.VTM )' expr: "round(float(payload.VTM), 1)" "temperature_sensor.ambient": json_payload: true if_expr: '! isnull( payload?.AMB )' expr: "float(payload.AMB)" "layzspa/Status": "value_sensor.status": if_expr: '! isnull( payload )' expr: "payload" "layzspa/button": "value_sensor.button": if_expr: '! isnull( payload )' expr: "payload" and in reactor.yaml I have: "layzspa_states": name: "Lay-Z-Spa States" friendly_name: 'Lay-Z-Spa States' include: layzspa_message I realize my MQTT configuration might be a bit unorthodox, but could there still be something unintentional in the latest MQTTController build? If needed, I can provide detailed logs.
Multi-System Reactor
🎉 My very first MSR controller: OpenSprinkler
therealdbT
Since today is my birthday - and I still pretend to be unconventional - I'm giving away a present to this wonderful community and I'm releasing my first OpenSprinkler controller for MSR. It was real fun to code it - and while it's still WIP, it seems to work OK for me. It's polling-based at the moment, but I'll add support for updates via MQTT very soon (it's already partially coded). Get it at (install is similar to MQTTController and such): https://github.com/dbochicchio/reactor-opensprinkler Feel free to try it. It's beta software, but it's stable. I'll update it weekly until all the tasks from my todo list are empty. Since I've learnt a lot from this controller, I'll explore new controllers soon.
Multi-System Reactor
Advice reqeusted to migrate MSR from Bare Metal to Container
T
Good day all, I'm in the process of trying to shut down my 10 year old Linux home server that served many purposes, but primarily it's what I used for my NAS/Plex Media server. I migrated the NAS aspect of the server in November of last year to a true NAS solution (Ubiquti UNAS Pro), which is rack mount and much more efficient than my old tower, which it's only side benefit was heating my home office during the winter. Unfortunately it also means heating my home office during the summer, which were about to be in full swing. I have two things running on this 10 year old server at this point. MSR and pi-hole. I'm running Plex Media Server on Fedora Workstation in Podman on mini PC, which is much more energy efficient than my old tower. My next step is to migrate MSR. I know there are images of MSR out there, and creating it is well documented. I'm going to be using Podman instead of Docker for various reasons, but they work very similar. What I don't know, is what I need to do to migrate my existing Bare Metal installation over to a container. Has anyone done this? Any advice?
Multi-System Reactor
Can´t restart or upgrade/deploy MSR
F
Topic thumbnail image
Multi-System Reactor
[Solved] Limit HA Entity in MSR
wmarcolinW
Topic thumbnail image
Multi-System Reactor

[Resolved] Day mode implementation question

Scheduled Pinned Locked Moved Multi-System Reactor
31 Posts 5 Posters 1.5k Views 5 Watching
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • toggledbitsT toggledbits

    @gwp1 I don't understand all the complexity around the Day rule looking at sunrise and wake up times. I think what you are describing is that you want Day to start at the earlier of sunrise or your wake-up time, and that's a simple OR condition: Wake Up Times is true OR time is after sunrise. And the period before from midnight to either has nothing to do with that and isn't a consideration.

    G Offline
    G Offline
    gwp1
    wrote on last edited by
    #7
    This post is deleted!
    1 Reply Last reply
    0
    • toggledbitsT toggledbits

      @gwp1 I don't understand all the complexity around the Day rule looking at sunrise and wake up times. I think what you are describing is that you want Day to start at the earlier of sunrise or your wake-up time, and that's a simple OR condition: Wake Up Times is true OR time is after sunrise. And the period before from midnight to either has nothing to do with that and isn't a consideration.

      G Offline
      G Offline
      gwp1
      wrote on last edited by gwp1
      #8

      @toggledbits had to mess about with some mode additions/removals and changed sunrise/sunset to between to make this work as at sunset both Day and Evening modes were valid at sunset.

      753fa5d3-b693-4a2f-adb6-889fd8d3114b-image.png

      Would this be better served as is or by adding this under Constraints?

      1 Reply Last reply
      0
      • toggledbitsT Offline
        toggledbitsT Offline
        toggledbits
        wrote on last edited by toggledbits
        #9

        Depends entirely on what the actions are, and when you want them to run. I'm assuming it just sets mode to Day. If the mode changed during the day, would you want it changed back to Day? Trigger.

        Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

        G 2 Replies Last reply
        0
        • toggledbitsT toggledbits

          Depends entirely on what the actions are, and when you want them to run. I'm assuming it just sets mode to Day. If the mode changed during the day, would you want it changed back to Day? Trigger.

          G Offline
          G Offline
          gwp1
          wrote on last edited by
          #10

          @toggledbits Yep, absolutely - if I leave during the day mode shifts to Away - returning home the expectation would be a return to Day if still before sunset. Same with Evening if after sunset.

          1 Reply Last reply
          1
          • toggledbitsT toggledbits

            Depends entirely on what the actions are, and when you want them to run. I'm assuming it just sets mode to Day. If the mode changed during the day, would you want it changed back to Day? Trigger.

            G Offline
            G Offline
            gwp1
            wrote on last edited by gwp1
            #11

            I continue to wrestle with modes. Changing Wake-up and Sunrise to after in Day resulted in a battle between Day and Evening in the later hours as both were "valid" after sunset given the OR in Day

            I've modified Wake-up to start at the two wake times, 0630 ET and 0730 ET, and end before 12noon ET. This closes it off from arguing at sunset.

            2cfdf9c6-2018-49ba-971a-3b32f3884ac9-image.png

            Day currently reads as such now:

            • I must be home (can this be addressed better by "mode != Away"?)
            • It must be after wake-up times OR after sunset sunrise, whichever comes first
            • must be ignored if in Vacation (I'm away for extended period) or Guest (someone specific is checking on the house whilst I'm on vaca)

            7b094e16-e40f-4266-90d4-ab578486832f-image.png

            Evening

            • should kick in after Sunset
            • I must be home (again, can this be driven by mode != Away better?)
              must be ignored if in Vacation (I'm away for extended period) or Guest (someone specific is checking on the house whilst I'm on vaca)

            bed37190-98d0-4fc1-9824-4941e50bbaef-image.png

            Night is set manually, ie not on a schedule. Two ways it can be set, the more basic is via voice command to Amazon Echo device that flips a virtual switch which triggers mode.

            The second is more complex but still manual:

            • phone must be in master bedroom
            • phone must be charging for > 00:00:10 (so lockdown can be aborted if needed)
            • can only be triggered if the above triggers happen whilst in Evening or Work (awakened in the middle of the night for a work thing and returning to sleep). If I happen to charge the phone during the day the house shouldn't lock down in Night mode.

            0c0a6f03-f12e-4a21-8d73-3cdb56b28f08-image.png

            I put this out there because I have a tendency (ok, more than a tendency) to overthink and over-complicate my rules as @toggledbits will confirm. This results in unnecessary demand on MSR as well as rules fighting with rules or duplicating outcomes.

            CatmanV2C 1 Reply Last reply
            0
            • G gwp1

              I continue to wrestle with modes. Changing Wake-up and Sunrise to after in Day resulted in a battle between Day and Evening in the later hours as both were "valid" after sunset given the OR in Day

              I've modified Wake-up to start at the two wake times, 0630 ET and 0730 ET, and end before 12noon ET. This closes it off from arguing at sunset.

              2cfdf9c6-2018-49ba-971a-3b32f3884ac9-image.png

              Day currently reads as such now:

              • I must be home (can this be addressed better by "mode != Away"?)
              • It must be after wake-up times OR after sunset sunrise, whichever comes first
              • must be ignored if in Vacation (I'm away for extended period) or Guest (someone specific is checking on the house whilst I'm on vaca)

              7b094e16-e40f-4266-90d4-ab578486832f-image.png

              Evening

              • should kick in after Sunset
              • I must be home (again, can this be driven by mode != Away better?)
                must be ignored if in Vacation (I'm away for extended period) or Guest (someone specific is checking on the house whilst I'm on vaca)

              bed37190-98d0-4fc1-9824-4941e50bbaef-image.png

              Night is set manually, ie not on a schedule. Two ways it can be set, the more basic is via voice command to Amazon Echo device that flips a virtual switch which triggers mode.

              The second is more complex but still manual:

              • phone must be in master bedroom
              • phone must be charging for > 00:00:10 (so lockdown can be aborted if needed)
              • can only be triggered if the above triggers happen whilst in Evening or Work (awakened in the middle of the night for a work thing and returning to sleep). If I happen to charge the phone during the day the house shouldn't lock down in Night mode.

              0c0a6f03-f12e-4a21-8d73-3cdb56b28f08-image.png

              I put this out there because I have a tendency (ok, more than a tendency) to overthink and over-complicate my rules as @toggledbits will confirm. This results in unnecessary demand on MSR as well as rules fighting with rules or duplicating outcomes.

              CatmanV2C Offline
              CatmanV2C Offline
              CatmanV2
              wrote on last edited by
              #12

              @gwp1 said in Day mode implementation question:

              It must be after wake-up times OR after sunset, whichever comes first

              I suspect you mean 'Sunrise'?

              C

              The Ex-Vera abuser know as CatmanV2.....

              G 1 Reply Last reply
              0
              • CatmanV2C CatmanV2

                @gwp1 said in Day mode implementation question:

                It must be after wake-up times OR after sunset, whichever comes first

                I suspect you mean 'Sunrise'?

                C

                G Offline
                G Offline
                gwp1
                wrote on last edited by
                #13

                @catmanv2 Egad, yes. Edited. Thank you!

                1 Reply Last reply
                1
                • PablaP Offline
                  PablaP Offline
                  Pabla
                  wrote on last edited by
                  #14

                  In your "Day" ruleset for sunrise/sunset condition set the sunset condition to be a few minutes before sunset. This way both sunset conditions in "Day" and "Evening" won't go true at the same time. Alternatively you could also add a condition in the "Day" rule that the "Evening" rule must be false . This will make sure "Day" can't be true at the same time as "Evening".

                  G 1 Reply Last reply
                  0
                  • PablaP Pabla

                    In your "Day" ruleset for sunrise/sunset condition set the sunset condition to be a few minutes before sunset. This way both sunset conditions in "Day" and "Evening" won't go true at the same time. Alternatively you could also add a condition in the "Day" rule that the "Evening" rule must be false . This will make sure "Day" can't be true at the same time as "Evening".

                    G Offline
                    G Offline
                    gwp1
                    wrote on last edited by
                    #15

                    @pabla Add a specific condition for Evening = false or add it to this existing condition in Day:

                    051ce098-67ba-4607-af44-0dfe9a3620c5-image.png

                    PablaP 1 Reply Last reply
                    0
                    • G gwp1

                      @pabla Add a specific condition for Evening = false or add it to this existing condition in Day:

                      051ce098-67ba-4607-af44-0dfe9a3620c5-image.png

                      PablaP Offline
                      PablaP Offline
                      Pabla
                      wrote on last edited by
                      #16

                      @gwp1 On second thought I would just add the offset to the sunset time in the "Day" rule. Its less of a band-aid solution.

                      G 1 Reply Last reply
                      1
                      • PablaP Pabla

                        @gwp1 On second thought I would just add the offset to the sunset time in the "Day" rule. Its less of a band-aid solution.

                        G Offline
                        G Offline
                        gwp1
                        wrote on last edited by
                        #17

                        @pabla Updated to:

                        653806ff-6383-4f86-8eea-fd3405ba38a5-image.png

                        1 Reply Last reply
                        0
                        • PablaP Offline
                          PablaP Offline
                          Pabla
                          wrote on last edited by Pabla
                          #18

                          Yeaup that should do the trick, what basically was happening as you said was the sunset conditions in both Day and Evening were true at the same time therefore causing the both rules to be true as well.

                          Now that you added the 1 mins before sunset, they won't overlap.

                          G 1 Reply Last reply
                          0
                          • PablaP Pabla

                            Yeaup that should do the trick, what basically was happening as you said was the sunset conditions in both Day and Evening were true at the same time therefore causing the both rules to be true as well.

                            Now that you added the 1 mins before sunset, they won't overlap.

                            G Offline
                            G Offline
                            gwp1
                            wrote on last edited by
                            #19

                            @pabla It should eliminate any race state. The original config was to have "Wake-up" and "sun" both use after but that created a mess alongside Evening as everything ran to midnight together.

                            1 Reply Last reply
                            0
                            • therealdbT Offline
                              therealdbT Offline
                              therealdb
                              wrote on last edited by
                              #20

                              I don't known why you're all setting a mode like this, but I'm still using home/away/night to drive my rules, plus a lot of flags (dark, sleeping, holiday, party, mute, green mode, solar, rainy, windy, bad weather) to combine all them together and drive my reactions. I'm curious to understand why you prefer this approach.

                              --
                              On a mission to automate everything.

                              My MS Reactor contrib
                              My Luup Plug-ins

                              PablaP G 2 Replies Last reply
                              0
                              • therealdbT therealdb

                                I don't known why you're all setting a mode like this, but I'm still using home/away/night to drive my rules, plus a lot of flags (dark, sleeping, holiday, party, mute, green mode, solar, rainy, windy, bad weather) to combine all them together and drive my reactions. I'm curious to understand why you prefer this approach.

                                PablaP Offline
                                PablaP Offline
                                Pabla
                                wrote on last edited by
                                #21

                                @therealdb My house modes are simple: Night/Home/Away/Vacation. All them are configured very simply, based on if the alarm is turned on (either stay or away) and who's home. That way there is no accidental/unexpected mode changes

                                G 1 Reply Last reply
                                0
                                • therealdbT therealdb

                                  I don't known why you're all setting a mode like this, but I'm still using home/away/night to drive my rules, plus a lot of flags (dark, sleeping, holiday, party, mute, green mode, solar, rainy, windy, bad weather) to combine all them together and drive my reactions. I'm curious to understand why you prefer this approach.

                                  G Offline
                                  G Offline
                                  gwp1
                                  wrote on last edited by
                                  #22

                                  @therealdb said in Day mode implementation question:

                                  still using home/away/night to drive my rules, plus a lot of flags (dark, sleeping, holiday, party, mute, green mode, solar, rainy, windy, bad weather) to combine all them together and drive my reactions.

                                  This is exactly what I'm driving at. I use Mode followed by a number of what I call "shared rules" (Wake-up times, cloudy day, temp < 40º, presence, etc.) that can be/are referenced in many other rulesets. Where I'm hitting my wall is the actual triggering of the modes (Day, Away, Evening, Night).

                                  My curiosity is around how you're actually triggering the modes themselves. The rest... I've got that nailed down.

                                  therealdbT 1 Reply Last reply
                                  0
                                  • PablaP Pabla

                                    @therealdb My house modes are simple: Night/Home/Away/Vacation. All them are configured very simply, based on if the alarm is turned on (either stay or away) and who's home. That way there is no accidental/unexpected mode changes

                                    G Offline
                                    G Offline
                                    gwp1
                                    wrote on last edited by gwp1
                                    #23

                                    So I went back in time to when I first set modes up. Here's my current settings:

                                    b383c52d-84a6-43bd-bb3b-f298f25642f8-image.png

                                    3d099145-a298-4314-af18-d612321024c9-image.png

                                    53c7b6b5-eedb-40b6-a955-140c9ae469eb-image.png 9c58c5b8-bf57-474a-9fe8-d8c71d9c1200-image.png

                                    3827169b-c2e7-44f2-9d14-9b1d6f3764f7-image.png

                                    I will use Wake Up Times internally with other rulesets rather than trying to use it to drive at the higher Mode level. Presence will be in those rulesets as well.

                                    1 Reply Last reply
                                    0
                                    • G gwp1

                                      @therealdb said in Day mode implementation question:

                                      still using home/away/night to drive my rules, plus a lot of flags (dark, sleeping, holiday, party, mute, green mode, solar, rainy, windy, bad weather) to combine all them together and drive my reactions.

                                      This is exactly what I'm driving at. I use Mode followed by a number of what I call "shared rules" (Wake-up times, cloudy day, temp < 40º, presence, etc.) that can be/are referenced in many other rulesets. Where I'm hitting my wall is the actual triggering of the modes (Day, Away, Evening, Night).

                                      My curiosity is around how you're actually triggering the modes themselves. The rest... I've got that nailed down.

                                      therealdbT Offline
                                      therealdbT Offline
                                      therealdb
                                      wrote on last edited by
                                      #24

                                      @gwp1 I'm using the alarm to drive modes, as @Pabla
                                      I'm also triggering wakeup mode from the alexa's alarm, so it's possible to move the time and automatically execute actions.

                                      --
                                      On a mission to automate everything.

                                      My MS Reactor contrib
                                      My Luup Plug-ins

                                      G 1 Reply Last reply
                                      0
                                      • therealdbT therealdb

                                        @gwp1 I'm using the alarm to drive modes, as @Pabla
                                        I'm also triggering wakeup mode from the alexa's alarm, so it's possible to move the time and automatically execute actions.

                                        G Offline
                                        G Offline
                                        gwp1
                                        wrote on last edited by
                                        #25

                                        @therealdb Interesting approach, using the Echo devices. I'd be concerned over any outage potential, has that been an issue?

                                        therealdbT 1 Reply Last reply
                                        0
                                        • G gwp1

                                          @therealdb Interesting approach, using the Echo devices. I'd be concerned over any outage potential, has that been an issue?

                                          therealdbT Offline
                                          therealdbT Offline
                                          therealdb
                                          wrote on last edited by
                                          #26

                                          @gwp1 I'm in my 3rd year with this automation and it never failed, but I have fallbacks. the alarm is working even if offline, and the house alarm will override the wake-up mode anyway (if the holiday flag is not set). The only minor drawback is that the announcements will not be turned on coordinated with the alarm, but I can live with that.

                                          --
                                          On a mission to automate everything.

                                          My MS Reactor contrib
                                          My Luup Plug-ins

                                          G 1 Reply Last reply
                                          0
                                          Reply
                                          • Reply as topic
                                          Log in to reply
                                          • Oldest to Newest
                                          • Newest to Oldest
                                          • Most Votes


                                          Recent Topics

                                          • [Reactor] Help with screne controller cycling logic
                                            therealdbT
                                            therealdb
                                            0
                                            3
                                            52

                                          • Stop the MSR by an external switch on Hubitat.
                                            wmarcolinW
                                            wmarcolin
                                            0
                                            4
                                            176

                                          • [Reactor] Variables not updating correctly in latest-25201-2aa18550
                                            tunnusT
                                            tunnus
                                            0
                                            22
                                            567

                                          • Expose MSR entities
                                            CatmanV2C
                                            CatmanV2
                                            0
                                            11
                                            116

                                          • Comment in Globa Expressions
                                            CrilleC
                                            Crille
                                            1
                                            2
                                            106

                                          • Little Bobby tables...
                                            CatmanV2C
                                            CatmanV2
                                            0
                                            3
                                            103

                                          • Home Assistant Voice TTS is Easy
                                            CatmanV2C
                                            CatmanV2
                                            0
                                            3
                                            153

                                          • Play Audio through Home Assistant Voice Unit
                                            toggledbitsT
                                            toggledbits
                                            1
                                            1
                                            96

                                          • Home Assistant Voice
                                            CatmanV2C
                                            CatmanV2
                                            0
                                            21
                                            744

                                          • Unofficial thread for compatibility
                                            tunnusT
                                            tunnus
                                            2
                                            1
                                            103

                                          • Gradually turn on lights.
                                            toggledbitsT
                                            toggledbits
                                            0
                                            21
                                            971

                                          • Reactor (Multi-System/Multi-Hub) Announcements
                                            toggledbitsT
                                            toggledbits
                                            5
                                            123
                                            56.0k
                                          Powered by NodeBB | Contributors
                                          Hosted freely by 10RUPTiV - Solutions Technologiques | Contact us
                                          • Login

                                          • Don't have an account? Register

                                          • Login or register to search.
                                          • First post
                                            Last post
                                          0
                                          • Categories
                                          • Recent
                                          • Tags
                                          • Popular
                                          • Unsolved