@rafale77 If you need anything else, let us know!

And that's the same thing for everyone

Let start maybe something useful for others. Maybe it will give you some idea!

Here's a summary of my setup!

I'm having :

• VM#1 that runs openLuup
• VM#2 that runs Zway
• 1x raspberry that I use to connect the RaZberry board using socat/ser2net to send "raw data" to the VM#2, this setup allow me to have all my stuff in the data center in the basement while having my zwave antenna on the first floor and send back the data!
• A couple of pine64 and raspberry around the house, most of the pine64 are use for "smart display" around the house that show data from various source (will post picture later). I have also a raspberry that I used for openSprinkler in the "Shed"
• Each room in the house + Garage + on the patio is having a SONOS speaker that I use for music of course but that I use with the TTS to send some notification around the house based on the presence!

For example, I can welcome people on the front door based on motion detection + IP camera motion!

• I decided a long time ago that all "sensors" will be handle by the DSC alarm. Currently I'm having over 40 sensors in/out divided in 5 partition (main/2nd floor, basement, office and shed and a partition for non-alarm sensor)

I connected my DSC using the DSC plugin from Vera to handle all that traffic that of course is send to openLuup!

On the zwave network, I would say that I'm having every room in/out done!

I'm using also this setup to welcome kids in the morning based on motion detection in each room and I have some time-based reminder using TTS mostly for the kids.

We also "named/called" our Home, SARAH, based on the TV Show Eureka that means "Self Actuated Residential Automated Habitat".

** openLuup handle ALL the logic, I have no scene and logic in Vera and Smarthome/Zway

More to come...

That's our main screen in the center of the house!

Inside the main screen, I'm having a bunch of stuff, like 2 Veraplus, and a RaZberry and of course a pine64 for the screen!

That's an uncomplete setup in the kitchen for screen #2, need to finish the "wood" part!

That's the touch screen monitor in the basement, so kids can use the Sonos app to play some music in the basement! The wood part is done, need to finish some "paint"!

I will try to do some testing with android! I know that from Android 10 on my phone it's working perfectly!

For those like me, using Debian. You can use the Ubuntu version.

Just did the switch this morning from 3.0.0 Debian to 3.0.6 Ubuntu on a Debian VM!

I just got our new server with 2 nvidia Tesla card in it

@CatmanV2 said in My Home Automation Setup...:

So happy that your cupboard is messier

that's 'cause I work hard last month with @rafale77 and @akbooer to get ride of Vera and transfert everything on zway!

dark mode enabled!

@akbooer yeah, the forum is running on a Raspberry Pi Zero W

@HSD99 We just disable on plugin in the forum that got an update this morning causing this issue! We just send a note to the plugin's dev!

Here the "photo" of Sarah...

And a little bit of story ...

Sarah is the little sister of "Crypto", Crypto is the "mascot" of PointPub Media that we use almost everywhere for our company branding.

As some of you know, I'm the owner of a web/marketing agency and an IT company, so people at work know Crypto and Sarah as they are "working" around them

@ArcherS Got the new version and having a hard time to understand how to connect my RGB strip on it without any "switch".

Just connected from the power source than controlling the RGB...

Anyone used this device to control LED strip ?

@therealdb done

@akbooer said in Delay in luup requests:

@elcid said in Delay in luup requests:

having troble with this forum, not allowing image upload.

...need to flag this to @DesT

Are you still having an issue ?

@akbooer What's in my plugin code I need to check that can trigger openLuup to reload ?

That's 'cause of what I said to @akbooer , I need to dig a little bit more as the plugin is having a hard time to "stay connected" to the DSC!

@krisztianszabo The password is only used between openLuup and DSC, so there's no password going out!
Check the the file, you have a line like that:

local password = luup.variable_get(DSC_PANEL_SID, "InterfacePassword", device) or "user"

so you can replace "user" there!

I'm using rocket.chat as we are using it at work!

@krisztianszabo yeah by default the plugin use the default password which is "user", if it's not your case, you can modify the code to change the "default" password to put yours!

I just tried it again, and pretty sure the problem is around the connection to DSC. When DSC plugin connect to the controller, the TCP connection open but openLuup reload again... and of course the connection doesn't come back online.

In DSC there's a limitation that only ONE connection at the same time can occur, so while openLuup reload again and again, the connection is still open and can't connect 'cause "envisalink" module refused it!

Under Vera, I'm never getting this issue!