Skip to content
  • Categories
  • Recent
  • Tags
  • Popular
  • Unsolved
Collapse
Discussion Forum to share and further the development of home control and automation, independent of platforms.
  1. Home
  2. Software
  3. Multi-System Reactor
  4. [Solved] HASS.OS Install
Gradually turn on lights.
Tom_DT
I have several lights that I would like to turn on very gradually over 15 or 20 seconds. from 0 to .25 in .01 increments. I have tried a few things that came nowhere near working, so here I am.
Multi-System Reactor
Stop the MSR by an external switch on Hubitat.
wmarcolinW
Use case: When performing home maintenance, such as air conditioning, I want all rules involving air conditioning to be disabled. To do this, to day, I have a virtual switch that I placed within all rules involving air conditioning, meaning that if I turn it off, none of them work. Then another situation: the water pump system and garden irrigation, another switch. In short, I had to create several virtual switches in Hubitat to disable rules in MSR. Unfortunately, however, I was unable to cover all scenarios, so I wondered if it would be possible for MSR to support a virtual MSR switch, which, when configured in the reactor settings, would function as a general on/off switch for MSR. If it is configured and turned off, the entire rules and actions in MSR stops working, except for the status change reading process, specifically for this switch, which, when turned on, would restart the MSR. Would it be possible to do something like this? Any recommendations from the experts?
Multi-System Reactor
Error After Upgrade
T
Topic thumbnail image
Multi-System Reactor
Reset attribute value of entity in event handler
R
Topic thumbnail image
Multi-System Reactor
Need help figuring out how to delay a reset on reaction
T
Topic thumbnail image
Multi-System Reactor
Way to search for rules (rule state) in other rules
T
@toggledbits, not sure if this is a feature request or I'm using the search tool wrong. You have a "Search for rule" in the Rules Set tab in MSR. It works nicely to find a rule and bring up said rule, but can it/could it be used for as a "where used?" global search? For instance, I have a fairly large set of rules, divided up into 10 different rulesets. There's easily a hundred individual rules, and many of the rules have Rule State triggers, which of course refer to other rules. Amongst my troubleshooting today, I came across what may have been a duplicate or troubleshooting attempt, but I can't tell if it's actually used as a Rule State in another rule without opening each rule that I suspect it may be a part of. Thanks.
Multi-System Reactor
Links to MSR from HA
Tom_DT
I am using Home Assistant a lot recently. On a dashboard showing the devices, I would like to show a link to the MSR rule that controls the devices. Is there a way to link directly into MSR?
Multi-System Reactor
Set Reaction > Script Action
wmarcolinW
Topic thumbnail image
Multi-System Reactor
Errors after updating to MQTTController build 25139
tunnusT
I'm running MSR build 25139 on Docker, using MQTT controller 24293, and everything working as expected. But if I try to upgrade to MQTTController build 25139, I'm getting the following errors on MSR UI: An Entity Attribute condition in "Lay-Z-Spa auto heating off" (Terrace) failed because the referenced entity "Lay-Z-Spa States" (mqtt>layzspa_states) does not have attribute value_sensor.god Last 11:20:37 An Entity Attribute condition in "Lay-Z-Spa auto heating off" (Terrace) failed because the referenced entity "Lay-Z-Spa States" (mqtt>layzspa_states) does not have attribute temperature_sensor.green Last 11:20:37 An Entity Attribute condition in "Lay-Z-Spa filter pump auto off" (Terrace) failed because the referenced entity "Lay-Z-Spa States" (mqtt>layzspa_states) does not have attribute temperature_sensor.red Last 11:20:37 An Entity Attribute condition in "Lay-Z-Spa filter pump auto run" (Terrace) failed because the referenced entity "Lay-Z-Spa States" (mqtt>layzspa_states) does not have attribute value_sensor.pump Last 11:20:37 An Entity Attribute condition in "Lay-Z-Spa watchdog" (Terrace) failed because the referenced entity "Lay-Z-Spa States" (mqtt>layzspa_states) does not have attribute value_sensor.status Last 11:20:37 My MQTT configuration (local_mqtt_devices.yaml) for the related entity is: layzspa_message: type: ValueSensor capabilities: ["temperature_sensor", "value_sensor", "power_sensor"] primary_attribute: power_sensor.value events: "layzspa/message": "power_sensor.value": json_payload: true if_expr: '! isnull( payload?.PWR )' expr: "float(payload.PWR)" "value_sensor.air": json_payload: true if_expr: '! isnull( payload?.AIR )' expr: "float(payload.AIR)" "value_sensor.pump": json_payload: true if_expr: '! isnull( payload?.FLT )' expr: "float(payload.FLT)" "value_sensor.god": json_payload: true if_expr: '! isnull( payload?.GOD )' expr: "float(payload.GOD)" "value_sensor.lock": json_payload: true if_expr: '! isnull( payload?.LCK )' expr: "float(payload.LCK)" "value_sensor.unit": json_payload: true if_expr: '! isnull( payload?.UNT )' expr: "float(payload.UNT)" "value_sensor.error": json_payload: true if_expr: '! isnull( payload?.ERR )' expr: "float(payload.ERR)" "temperature_sensor.green": json_payload: true if_expr: '! isnull( payload?.GRN )' expr: "float(payload.GRN)" "temperature_sensor.red": json_payload: true if_expr: '! isnull( payload?.RED )' expr: "float(payload.RED)" "temperature_sensor.target": json_payload: true if_expr: '! isnull( payload?.TGT )' expr: "float(payload.TGT)" "temperature_sensor.value": json_payload: true if_expr: '! isnull( payload?.TMP )' expr: "float(payload.TMP)" "temperature_sensor.virtual": json_payload: true if_expr: '! isnull( payload?.VTM )' expr: "round(float(payload.VTM), 1)" "temperature_sensor.ambient": json_payload: true if_expr: '! isnull( payload?.AMB )' expr: "float(payload.AMB)" "layzspa/Status": "value_sensor.status": if_expr: '! isnull( payload )' expr: "payload" "layzspa/button": "value_sensor.button": if_expr: '! isnull( payload )' expr: "payload" and in reactor.yaml I have: "layzspa_states": name: "Lay-Z-Spa States" friendly_name: 'Lay-Z-Spa States' include: layzspa_message I realize my MQTT configuration might be a bit unorthodox, but could there still be something unintentional in the latest MQTTController build? If needed, I can provide detailed logs.
Multi-System Reactor
🎉 My very first MSR controller: OpenSprinkler
therealdbT
Since today is my birthday - and I still pretend to be unconventional - I'm giving away a present to this wonderful community and I'm releasing my first OpenSprinkler controller for MSR. It was real fun to code it - and while it's still WIP, it seems to work OK for me. It's polling-based at the moment, but I'll add support for updates via MQTT very soon (it's already partially coded). Get it at (install is similar to MQTTController and such): https://github.com/dbochicchio/reactor-opensprinkler Feel free to try it. It's beta software, but it's stable. I'll update it weekly until all the tasks from my todo list are empty. Since I've learnt a lot from this controller, I'll explore new controllers soon.
Multi-System Reactor
Advice reqeusted to migrate MSR from Bare Metal to Container
T
Good day all, I'm in the process of trying to shut down my 10 year old Linux home server that served many purposes, but primarily it's what I used for my NAS/Plex Media server. I migrated the NAS aspect of the server in November of last year to a true NAS solution (Ubiquti UNAS Pro), which is rack mount and much more efficient than my old tower, which it's only side benefit was heating my home office during the winter. Unfortunately it also means heating my home office during the summer, which were about to be in full swing. I have two things running on this 10 year old server at this point. MSR and pi-hole. I'm running Plex Media Server on Fedora Workstation in Podman on mini PC, which is much more energy efficient than my old tower. My next step is to migrate MSR. I know there are images of MSR out there, and creating it is well documented. I'm going to be using Podman instead of Docker for various reasons, but they work very similar. What I don't know, is what I need to do to migrate my existing Bare Metal installation over to a container. Has anyone done this? Any advice?
Multi-System Reactor
Reactor (Multi-System/Multi-Hub) Announcements
toggledbitsT
Build 21228 has been released. Docker images available from DockerHub as usual, and bare-metal packages here. Home Assistant up to version 2021.8.6 supported; the online version of the manual will now state the current supported versions; Fix an error in OWMWeatherController that could cause it to stop updating; Unify the approach to entity filtering on all hub interface classes (controllers); this works for device entities only; it may be extended to other entities later; Improve error detail in messages for EzloController during auth phase; Add isRuleSet() and isRuleEnabled() functions to expressions extensions; Implement set action for lock and passage capabilities (makes them more easily scriptable in some cases); Fix a place in the UI where 24-hour time was not being displayed.
Multi-System Reactor
Can´t restart or upgrade/deploy MSR
F
Topic thumbnail image
Multi-System Reactor
[Solved] Limit HA Entity in MSR
wmarcolinW
Topic thumbnail image
Multi-System Reactor
Organizing/ structuring rule sets and rules
R
Hi guys, Just wondering how you guys organize your rule sets and rules. I wish I had an extra layer to have some more granularity, but my feature request was not popular. Maybe there are better ways to organize my rule sets. I use the rule sets now primarily for rooms. So a rule set per room. But maybe grouping by functionality works better. Any examples/ suggestions would be appreciated.
Multi-System Reactor
Moving MSR from a QNAP container to RP 5 - some issues
Tom_DT
Topic thumbnail image
Multi-System Reactor
Widget deletion does not work and landing page (status) is empy
M
Topic thumbnail image
Multi-System Reactor
Need help reducing false positive notifications
T
Topic thumbnail image
Multi-System Reactor
Deleting widgets
tunnusT
Hopefully a trivial question, but how do you delete widgets in a status page? Using build 22266
Multi-System Reactor
MQTT configuration question
tunnusT
I have the following yaml configuration in local_mqtt_devices file x_mqtt_device: set_speed: arguments: speed: type: str topic: "command/%friendly_name%" payload: type: json expr: '{ "fan": parameters.speed }' While this works fine, I'm wondering how this could be changed to "fixed" parameters, as in this case "fan" only accepts "A", "Q" or a numeric value of 1-5?
Multi-System Reactor

[Solved] HASS.OS Install

Scheduled Pinned Locked Moved Multi-System Reactor
16 Posts 5 Posters 1.7k Views 5 Watching
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • S Offline
    S Offline
    sender
    wrote on last edited by
    #6

    In hassos you can install an addon "portainer" and with the needed "settings" you can run your own dockers very easily besides the other containers (of which homeassistant is one).

    1 Reply Last reply
    0
    • V Offline
      V Offline
      vezinpi
      wrote on last edited by
      #7

      Hi,

      That's what I did.See post above. The challenge was to acheive data persistence between reboot, upgrade, etc... Hass OS is pretty tight when it comes to he host file system.

      Thanks

      Using MSR 25016 on Docker, on a Raspberry Pi with Bookworm. Home Assistant, Z-Wave JS-UI

      S 1 Reply Last reply
      0
      • V vezinpi

        Hi,

        That's what I did.See post above. The challenge was to acheive data persistence between reboot, upgrade, etc... Hass OS is pretty tight when it comes to he host file system.

        Thanks

        S Offline
        S Offline
        sender
        wrote on last edited by
        #8

        @vezinpi Have you ran the container and the portainer addon in privileged mode? I have had not trouble in data persistance...

        1 Reply Last reply
        0
        • V vezinpi

          Hi again,

          Just thought I would provide an update on where I am at. I might also be helpfull to other people.

          As you know, I am trying to get the MSR Container work on a Pi-4, configured with the standard HASS operating system (image via balena etcher). Well I finally found a solution to data persistance between reboot. Here is what I did:

          • Installed samba add-on to get accesss to the standard Hass configuration folders

          • Installed Portainer which will be used to install MSR

          • From within Portainer, add an MSR container with the following configuration: image: toggledbits/reactor:latest-raspbian-armv7l, add a TZ variable with the proper region, restart policy define On failure, add a bind volume to map the reactor container /var/reactor to the host /mnt/data/supervisor/homeassistant/reactor. This (reactor) folder will be accessible via the samba addon under the config folder.

          • Restarted the MSR container

          The reactor.yaml configuration file is now accessible via samba under homeassistant/config/reactor/config or from a terminal sessison performed from portainer in the var/reactor/config folder.

          All seems to work for now. Devices from vera and HASS are being seen by MSR. Configuration persist trough a reboot and I was also able to import (convert using the tool provided) my configuration from Reactor. I am now in the process of making the final adjustment.

          Not sure what will the future hold but for now it is working fine.

          Many thanks for your work and support.

          F Offline
          F Offline
          Fanan
          wrote on last edited by Fanan
          #9

          @vezinpi

          1. How do I add a TZ-variable? And how do I know how my region (Sweden/Europe) is added?
          2. My reactions seems to work, but I can't reach the Web UI. The adress in reactor.yaml doesn't work. I also tried the http://127.0.0.1:8111. Can someone point me in the right direction - what adress can it be to reach the Web UI?

          Thanks!

          1 Reply Last reply
          0
          • MikeReadingtonM Offline
            MikeReadingtonM Offline
            MikeReadington
            wrote on last edited by MikeReadington
            #10

            I don't want to give you bad info, but I believe when you edit a container in Portainer, it actually deletes and publishes the edited one in place.

            Check here.

            Edit or duplicate a container | Portainer Documentation

            Edit or duplicate a container | Portainer Documentation

            Here are some screen shot from Portainer on my Synology. These are the locations you need to edit for port and TZ.

            Screen Shot 2021-08-13 at 12.08.51 PM.png Screen Shot 2021-08-13 at 12.08.59 PM.png

            F 2 Replies Last reply
            0
            • MikeReadingtonM MikeReadington

              I don't want to give you bad info, but I believe when you edit a container in Portainer, it actually deletes and publishes the edited one in place.

              Check here.

              Edit or duplicate a container | Portainer Documentation

              Edit or duplicate a container | Portainer Documentation

              Here are some screen shot from Portainer on my Synology. These are the locations you need to edit for port and TZ.

              Screen Shot 2021-08-13 at 12.08.51 PM.png Screen Shot 2021-08-13 at 12.08.59 PM.png

              F Offline
              F Offline
              Fanan
              wrote on last edited by
              #11

              @mikereadington
              Thanks!

              Now it's working!! 😊👌

              1 Reply Last reply
              0
              • MikeReadingtonM MikeReadington

                I don't want to give you bad info, but I believe when you edit a container in Portainer, it actually deletes and publishes the edited one in place.

                Check here.

                Edit or duplicate a container | Portainer Documentation

                Edit or duplicate a container | Portainer Documentation

                Here are some screen shot from Portainer on my Synology. These are the locations you need to edit for port and TZ.

                Screen Shot 2021-08-13 at 12.08.51 PM.png Screen Shot 2021-08-13 at 12.08.59 PM.png

                F Offline
                F Offline
                Fanan
                wrote on last edited by Fanan
                #12

                @mikereadington

                • SOLVED*
                  Solved by using Watchtower. Followed this guide:
                  How to Update Docker Containers using Watchtower with Portainer

                *OLD POST:
                I've been able to update/pull the latest release of MSR a few times within Portainer (running in HA on a HA blue - odroid), but that's not possible anymore.
                I only get this message:
                b80f0d7c-b831-4680-af7b-ed72b213ce01-image.png I have stopped the MSR as I did before, but nothing seems to help anymore. I have reactor version 21228-05d7497 running, and can't upgrade.
                My Portainer version is 2.6.2. Home Assistant is 2021.8.8.
                Anyone else having this problem or knows why I can't pull and deploy the latest release?
                /Fanan

                1 Reply Last reply
                0
                • toggledbitsT Offline
                  toggledbitsT Offline
                  toggledbits
                  wrote on last edited by
                  #13

                  Your initial problem may have been due to a build error on my part; the build was redone during the course of yesterday and repushed, so that may have had more to do with your success than using WatchTower. You might want to try it the "old" way and see what happens.

                  Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                  1 Reply Last reply
                  0
                  • V Offline
                    V Offline
                    vezinpi
                    wrote on last edited by vezinpi
                    #14

                    @Fanan If you are using the HASS.OS then this is a portainer issue in HAAS. See the following link:

                    Aug 23, 2021

                    Portainer v2.6.2 - unable to start containers

                    Portainer v2.6.2 - unable to start containers

                    Not sure what the problem could be, but even since the portainer update to v2.6.2 ( integration v2.0.0 ) I’m unable to (re)start any of my previous working containers… The failure I get is : Starting container with non-empty request body was deprecated since API v1.22 and removed in v1.24 Anyone...

                    Until the problem is resolved in HAAS you will have to install the previous version of the Add-on.

                    Using MSR 25016 on Docker, on a Raspberry Pi with Bookworm. Home Assistant, Z-Wave JS-UI

                    F 1 Reply Last reply
                    0
                    • V vezinpi

                      @Fanan If you are using the HASS.OS then this is a portainer issue in HAAS. See the following link:

                      Aug 23, 2021

                      Portainer v2.6.2 - unable to start containers

                      Portainer v2.6.2 - unable to start containers

                      Not sure what the problem could be, but even since the portainer update to v2.6.2 ( integration v2.0.0 ) I’m unable to (re)start any of my previous working containers… The failure I get is : Starting container with non-empty request body was deprecated since API v1.22 and removed in v1.24 Anyone...

                      Until the problem is resolved in HAAS you will have to install the previous version of the Add-on.

                      F Offline
                      F Offline
                      Fanan
                      wrote on last edited by
                      #15

                      @vezinpi Thanks!
                      I installed alexbelgium repository and his version of Portainer. It was able to update MSR to the latest version (it took a few times with error messages, but then it worked). His version is also 2.6.3. - not 2.6.2. which is the latest available regarding the Portainer add-on i HA.

                      1 Reply Last reply
                      0
                      • V Offline
                        V Offline
                        vezinpi
                        wrote on last edited by
                        #16

                        Thanks. I will keep that up my sleeve in case HASS fail to address the issue in a timely manner. But for now, the Portainer plugin version 1.5.2 is doing the trick.

                        Using MSR 25016 on Docker, on a Raspberry Pi with Bookworm. Home Assistant, Z-Wave JS-UI

                        1 Reply Last reply
                        0
                        • toggledbitsT toggledbits locked this topic on
                        Reply
                        • Reply as topic
                        Log in to reply
                        • Oldest to Newest
                        • Newest to Oldest
                        • Most Votes


                        Recent Topics

                        • Gradually turn on lights.
                          G
                          gwp1
                          0
                          4
                          139

                        • Stop the MSR by an external switch on Hubitat.
                          wmarcolinW
                          wmarcolin
                          0
                          1
                          35

                        • Error After Upgrade
                          G
                          gwp1
                          0
                          4
                          105

                        • Reset attribute value of entity in event handler
                          R
                          RHCPNG
                          0
                          5
                          205

                        • Need help figuring out how to delay a reset on reaction
                          G
                          gwp1
                          0
                          22
                          929

                        • Way to search for rules (rule state) in other rules
                          T
                          tamorgen
                          0
                          3
                          101

                        • Links to MSR from HA
                          Tom_DT
                          Tom_D
                          0
                          1
                          91

                        • Set Reaction > Script Action
                          wmarcolinW
                          wmarcolin
                          0
                          11
                          437

                        • Wiring Samotech SM308-S into light fitting
                          akbooerA
                          akbooer
                          0
                          2
                          151

                        • Errors after updating to MQTTController build 25139
                          toggledbitsT
                          toggledbits
                          0
                          6
                          239

                        • 🎉 My very first MSR controller: OpenSprinkler
                          therealdbT
                          therealdb
                          5
                          13
                          919

                        • Advice reqeusted to migrate MSR from Bare Metal to Container
                          T
                          tamorgen
                          0
                          5
                          262
                        Powered by NodeBB | Contributors
                        Hosted freely by 10RUPTiV - Solutions Technologiques | Contact us
                        • Login

                        • Don't have an account? Register

                        • Login or register to search.
                        • First post
                          Last post
                        0
                        • Categories
                        • Recent
                        • Tags
                        • Popular
                        • Unsolved