Skip to content
  • Categories
  • Recent
  • Tags
  • Popular
  • Unsolved
Collapse
Discussion Forum to share and further the development of home control and automation, independent of platforms.
  1. Home
  2. Software
  3. Multi-System Reactor
  4. [MSR] reactor-mqtt-contrib package for additional MQTT templates
How to upgrade from an old version of MSR?
cw-kidC
Hello I haven't updated my installation of MSR in a very long time. Its a bare metal Linux install currently on version 24366-3de60836 I see the latest version is now latest-26011-c621bbc7 I assume I cannot just jump from a very old version to the latest version? Or can I? Thanks
Multi-System Reactor
Access control - allowing anonymous user to dashboard
tunnusT
Using build 25328 and having the following users.yaml configuration: users: # This section defines your valid users. admin: ******* groups: # This section defines your user groups. Optionally, it defines application # and API access restrictions (ACLs) for the group. Users may belong to # more than one group. Again, no required or special groups here. admin_group: users: - admin applications: true # special form allows access to ALL applications guests: users: "*" applications: - dashboard api_acls: # This ACL allows users in the "admin" group to access the API - url: "/api" group: admin_group allow: true log: true # This ACL allows anyone/thing to access the /api/v1/alive API endpoint - url: "/api/v1/alive" allow: true session: timeout: 7200 # (seconds) rolling: true # activity extends timeout when true # If log_acls is true, the selected ACL for every API access is logged. log_acls: true # If debug_acls is true, even more information about ACL selection is logged. debug_acls: true My goal is to allow anonymous user to dashboard, but MSR is still asking for a password when trying to access that. Nothing in the logs related to dashboard access. Probably an error in the configuration, but help needed to find that. Tried to put url: "/dashboard" under api_acls, but that was a long shot and didn't work.
Multi-System Reactor
VEC Virtual Switch Auto Off
S
I use Virtual Entity Controller virtual switches which I turn on via webhooks from other applications. Once a switch triggers and turns on, I can then activate associated rules. I would like each virtual switch to automatically turn off after a configurable time (e.g., 5 seconds, 10 seconds). Is there a better way to achieve this auto-off behavior instead of creating a separate rule for each switch that uses the 'Condition must be sustained for' option to turn it off? With a large number of these switches (and the associated turn-off rules), I'm checking to see if there is a simpler approach.If not, could this be a feature request to add an auto-off timer directly to the virtual switches. Thanks Reactor (Multi-hub) latest-26011-c621bbc7 VirtualEntityController v25356 Synology Docker
Multi-System Reactor
Upcoming Storage Change -- Got Back-ups?
toggledbitsT
TL;DR: Format of data in storage directory will soon change. Make sure you are backing up the contents of that directory in its entirety, and you preserve your backups for an extended period, particularly the backup you take right before upgrading to the build containing this change (date of that is still to be determined, but soon). The old data format will remain readable (so you'll be able to read your pre-change backups) for the foreseeable future. In support of a number of other changes in the works, I have found it necessary to change the storage format for Reactor objects in storage at the physical level. Until now, plain, standard JSON has been used to store the data (everything under the storage directory). This has served well, but has a few limitations, including no real support for native JavaScript objects like Date, Map, Set, and others. It also is unable to store data that contains "loops" — objects that reference themselves in some way. I'm not sure exactly when, but in the not-too-distant future I will publish a build using the new data format. It will automatically convert existing JSON data to the new format. For the moment, it will save data in both the new format and the old JSON format, preferring the former when loading data from storage. I have been running my own home with this new format for several months, and have no issues with data loss or corruption. A few other things to know: If you are not already backing up your storage directory, you should be. At a minimum, back this directory up every time you make big changes to your Rules, Reactions, etc. Your existing JSON-format backups will continue to be readable for the long-term (years). The code that loads data from these files looks for the new file format first (which will have a .dval suffix), and if not found, will happily read (and convert) a same-basenamed .json file (i.e. it looks for ruleid.dval first, and if it doesn't find it, it tries to load ruleid.json). I'll publish detailed instructions for restoring from old backups when the build is posted (it's easy). The new .dval files are not directly human-readable or editable as easily as the old .json files. A new utility will be provided in the tools directory to convert .dval data to .json format, which you can then read or edit if you find that necessary. However, that may not work for all future data, as my intent is to make more native JavaScript objects directly storable, and many of those objects cannot be stored in JSON. You may need to modify your backup tools/scripts to pick up the new files: if you explicitly name .json files (rather than just specifying the entire storage directory) in your backup configuration, you will need to add .dval files to get a complete, accurate backup. I don't think this will be an issue for any of you; I imagine that you're all just backing up the entire contents of storage regardless of format/name, that is the safest (and IMO most correct) way to go (if that's not what you're doing, consider changing your approach). The current code stores the data in both the .dval form and the .json form to hedge against any real-world problems I don't encounter in my own use. Some future build will drop this redundancy (i.e. save only to .dval form). However, the read code for the .json form will remain in any case. This applies only to persistent storage that Reactor creates and controls under the storage tree. All other JSON data files (e.g. device data for Controllers) are unaffected by this change and will remain in that form. YAML files are also unaffected by this change. This thread is open for any questions or concerns.
Multi-System Reactor
Oddness in Copy/Move of Reactions
G
Topic thumbnail image
Multi-System Reactor
[Solved] function isRuleEnabled() issue
CrilleC
Topic thumbnail image
Multi-System Reactor
[Reactor] Problem with Global Reactions and groups
therealdbT
Topic thumbnail image
Multi-System Reactor
Possible feature request 2?
CatmanV2C
Just another thought. Adding devices from my Home Assistant / Zigbee2MQTT integration. Works perfectly but they always add as their IEEE address. Some of these devices have up to 10 entities associated, and the moment they are renamed to something sensible, each of those entities 'ceases to exist' in MSR. I like things tidy, and deleting each defunct entity needs 3 clicks. Any chance of a 'bulk delete' option? No biggy as I've pretty much finished my Z-wave migration and I don't expect to be adding more than 2 new Zigbee devices Cheers C
Multi-System Reactor
Reactor (Multi-System/Multi-Hub) Announcements
toggledbitsT
Build 21228 has been released. Docker images available from DockerHub as usual, and bare-metal packages here. Home Assistant up to version 2021.8.6 supported; the online version of the manual will now state the current supported versions; Fix an error in OWMWeatherController that could cause it to stop updating; Unify the approach to entity filtering on all hub interface classes (controllers); this works for device entities only; it may be extended to other entities later; Improve error detail in messages for EzloController during auth phase; Add isRuleSet() and isRuleEnabled() functions to expressions extensions; Implement set action for lock and passage capabilities (makes them more easily scriptable in some cases); Fix a place in the UI where 24-hour time was not being displayed.
Multi-System Reactor
Copying a global reaction
tunnusT
With build 25328, if you copy a global reaction, a new reaction does not appear in the UI unless you do a refresh. I recall this used to work without needing this page refresh? Anyway, only a minor nuisance.
Multi-System Reactor
[Reactor] Bug when sending MQTT boolean payloads
therealdbT
Topic thumbnail image
Multi-System Reactor
Difficulty defining repeating annual period
R
I have tried numerous ways to define a recurring annual period, for example from December 15 to January 15. No matter which method I try - after and before, between, after and/not after, Reactor reports "waiting for invalid date, invalid date. Some constructs also seem to cause Reactor to hang, timeout and restart. For example "before January 15 is evaluated as true, but reports "waiting for invalid date, invalid date". Does anyone have a tried and true method to define a recurring annual period? I think the "between" that I used successfully in the past may have broken with one of the updates.
Multi-System Reactor
Need help with sequence
T
Good evening all, For about the past week or so, I've been having problems with a specific rule in my home automation that controls when my home goes from an Away mode to Home mode. One of the conditions it checked for was my alarm panel, when it changed from Armed Away to Disarmed. There seems to have been a firmware update on the panel that added an intermittent step of "pending", and I can't say for certain it happens 100% of the time. Is there a way to write a condition that so it changes from one condition, to the next, and then another condition? As in, Home alarm changes from armed_away to pending to disarmed. Thanks.
Multi-System Reactor
Possible feature request?
CatmanV2C
No idea how easy this would be. During my migration away from Z-wave I've been replacing the Z-wave devices with Sonoff which has broken some of my automations. Any chance of a 'Test Reaction' function to call out which ones are broken because an entity no longer exists? Without actually running the reaction? Or does this exist already and I'm just not aware of how to do it? Obviously I can see entities that are no longer available, but not quite what I'm looking for. I guess it's something of an edge case so no huge issue. TIA! C
Multi-System Reactor
Logic Assistance: Exterior Lights on when Illuminance Below Threshold
PablaP
Topic thumbnail image
Multi-System Reactor
Time series documentation
tunnusT
Is the current manual (incl. examples) up to date with how retention value is handled in time series configuration? Referring to this post
Multi-System Reactor
MQTT templates for ZIgbee scene controller, or a better way?
CatmanV2C
Topic thumbnail image
Multi-System Reactor
Reset a delay
CatmanV2C
I'm sure this has been asked, and answered, but damned if I can figure it out Use case: I have a rear garden with lights. A door from the kitchen into the garden and a door from the garage. Currently if I open the kitchen door the lights come on (yay) and a 3 minute delay starts. After 3 minutes, no matter what else happens, the lights go off (Boo! But also yay!) What I would like is for the 3 minute delay until the lights go off to start from the latest door open event. That is, if I'm going from kitchen to garage, and back again, the lights stay on until there's three minutes of no activity. I've tried 'hacking' with a virtual switch, but can't seem to stop the delay. Any pointers? TIA C
Multi-System Reactor
Reactor Loading Screen Safari
S
Topic thumbnail image
Multi-System Reactor
Constraints states visually do not match actual
S
Topic thumbnail image
Multi-System Reactor

[MSR] reactor-mqtt-contrib package for additional MQTT templates

Scheduled Pinned Locked Moved Multi-System Reactor
46 Posts 4 Posters 11.5k Views 4 Watching
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • toggledbitsT toggledbits

    @gwp1 said in [MSR] reactor-mqtt-contrib package for additional MQTT templates:

    @toggledbits I am not receiving any errors.

    Then there's nothing wrong with uses_template.

    I'll make the same comment/question to you that I made to @CatmanV2 earlier in this same thread: you're on the latest MQTTController, right?

    G Offline
    G Offline
    gwp1
    wrote on last edited by gwp1
    #27

    @toggledbits MQTTController-22326 (double-checked the CHANGELOG.md)

    EDIT: ...which I now see is a version behind. You snuck one in on me. Updating to MQTTController-22340.

    EDIT2: Nailed it.
    8009852f-2527-46c2-a2da-508b073c5dec-image.png

    *Hubitat C-7 2.4.3.177
    *Proxmox VE v8, Beelink MiniPC 12GBs, SSD

    *HAOS
    Core 2026.1.1
    w/ HA Connect ZWA-2
    FW: v1.1
    SDK: v7.23.1

    *Prod MSR in docker/portainer
    MSR: latest-26011-c621bbc7
    MQTTController: 25139
    ZWave Controller: 25139

    G CatmanV2C 2 Replies Last reply
    1
    • G gwp1

      @toggledbits MQTTController-22326 (double-checked the CHANGELOG.md)

      EDIT: ...which I now see is a version behind. You snuck one in on me. Updating to MQTTController-22340.

      EDIT2: Nailed it.
      8009852f-2527-46c2-a2da-508b073c5dec-image.png

      G Offline
      G Offline
      gwp1
      wrote on last edited by
      #28

      @toggledbits @therealdb @CatmanV2 Thank you all for your help here, this is a big step in my system. Really appreciate it!

      *Hubitat C-7 2.4.3.177
      *Proxmox VE v8, Beelink MiniPC 12GBs, SSD

      *HAOS
      Core 2026.1.1
      w/ HA Connect ZWA-2
      FW: v1.1
      SDK: v7.23.1

      *Prod MSR in docker/portainer
      MSR: latest-26011-c621bbc7
      MQTTController: 25139
      ZWave Controller: 25139

      1 Reply Last reply
      2
      • CatmanV2C Offline
        CatmanV2C Offline
        CatmanV2
        wrote on last edited by
        #29

        @therealdb what are your updates set to on the iPhone app? The data is going to be useful, but on 'Significant' I appear to be only getting updates on
        string and region which makes sense.
        I'm assuming that battery_power.level won't update more frequently unless the app is configured to 'Move'

        Has anyone done that? Does it kill the iPhone battery?

        Cheers

        C

        The Ex-Vera abuser know as CatmanV2.....

        1 Reply Last reply
        0
        • G gwp1

          @toggledbits MQTTController-22326 (double-checked the CHANGELOG.md)

          EDIT: ...which I now see is a version behind. You snuck one in on me. Updating to MQTTController-22340.

          EDIT2: Nailed it.
          8009852f-2527-46c2-a2da-508b073c5dec-image.png

          CatmanV2C Offline
          CatmanV2C Offline
          CatmanV2
          wrote on last edited by
          #30

          @gwp1 how did you get the Driving Flag?

          Cheers

          C

          The Ex-Vera abuser know as CatmanV2.....

          G 1 Reply Last reply
          0
          • CatmanV2C CatmanV2

            @gwp1 how did you get the Driving Flag?

            Cheers

            C

            G Offline
            G Offline
            gwp1
            wrote on last edited by gwp1
            #31

            @catmanv2 move translates to any movement your phone is making - increases accuracy but kills battery life. significant is defined by OwnTracks as "traveling a distance of at least 500 meters in 5 minutes" which lets the app nap and is much easier on the battery.

            Driving Flag is a virtual switch I created based on distance from Home. I believe I currently have it set to .1 mile so it trips as soon as I pull out of the neighborhood. I use it as a safety to the GPS reporting for when I'm not home. I have a second one called Driving Flag - Far Away that kicks in at two miles. This is for use when I'm obviously not just puttering about the neighborhood but going to be gone while. Can be used to trigger HVAC, etc.

            *Hubitat C-7 2.4.3.177
            *Proxmox VE v8, Beelink MiniPC 12GBs, SSD

            *HAOS
            Core 2026.1.1
            w/ HA Connect ZWA-2
            FW: v1.1
            SDK: v7.23.1

            *Prod MSR in docker/portainer
            MSR: latest-26011-c621bbc7
            MQTTController: 25139
            ZWave Controller: 25139

            1 Reply Last reply
            1
            • CatmanV2C Offline
              CatmanV2C Offline
              CatmanV2
              wrote on last edited by
              #32

              Cool, ta

              C

              The Ex-Vera abuser know as CatmanV2.....

              1 Reply Last reply
              0
              • toggledbitsT toggledbits

                Yes, your configuration of prefix and topic don't make a string that matches what is being received. Based on what it is coming in and how those fields template configuration are used, prefix should be msrmqtt and topic should be just iphone8.

                Conspicuous give-away: your test_iphone value doesn't appear in the topic or payload of what you're receiving.

                @therealdb this may need a bit more documentation, since the relevance of prefix and topic aren't immediately clear (at least, not to me) without looking at the template itself and seeing how they are used, and likely the phone configuration as well (i.e. describe how configuration fields on the phone may appear in the final event topic).

                therealdbT Offline
                therealdbT Offline
                therealdb
                wrote on last edited by
                #33

                @toggledbits said in [MSR] reactor-mqtt-contrib package for additional MQTT templates:

                @therealdb this may need a bit more documentation, since the relevance of prefix and topic aren't immediately clear (at least, not to me) without looking at the template itself and seeing how they are used, and likely the phone configuration as well (i.e. describe how configuration fields on the phone may appear in the final event topic).

                It’s in the readme. Maybe, when you’ll build an UI, we could provide descriptive text for parameters.

                --
                On a mission to automate everything.

                My MS Reactor contrib
                My Luup Plug-ins

                1 Reply Last reply
                0
                • therealdbT Offline
                  therealdbT Offline
                  therealdb
                  wrote on last edited by therealdb
                  #34

                  Version 22350 released.
                  What's new:

                  • shelly_button1: for Shelly Button 1 (battery powered button) - all the button modes (short, long, double, triple) are supported.
                  • fullykiosk: to handle messages coming from FullyKiosk. You'll have battery and charging status, screen brightness and current app.

                  What's fixed:

                  • query for all shelly template
                  • owntracks: trying to better handle null values/spurious messages.

                  How to update: just replace the files and restart Reactor.

                  --
                  On a mission to automate everything.

                  My MS Reactor contrib
                  My Luup Plug-ins

                  G 2 Replies Last reply
                  1
                  • therealdbT therealdb

                    Version 22350 released.
                    What's new:

                    • shelly_button1: for Shelly Button 1 (battery powered button) - all the button modes (short, long, double, triple) are supported.
                    • fullykiosk: to handle messages coming from FullyKiosk. You'll have battery and charging status, screen brightness and current app.

                    What's fixed:

                    • query for all shelly template
                    • owntracks: trying to better handle null values/spurious messages.

                    How to update: just replace the files and restart Reactor.

                    G Offline
                    G Offline
                    gwp1
                    wrote on last edited by
                    #35

                    @therealdb I grabbed the latest owntracks_sensor and dropped it on top of the existing. (Yes, being late and I'm exhausted I failed to backup the original template.)

                            owntracks_iphone14p: #entity ID - must be unique
                              name: "iPhone14p J2A" # friendly name
                              prefix: "msrmqtt"
                              topic: "iphone14p-j2a"
                              uses_template: "owntracks_sensor"
                              homeRegionName: "Home"
                    #
                            owntracks_iphone8: #entity ID - must be unique
                              name: "iPhone8 location" # friendly name
                              prefix: "msrmqtt"
                              topic: "iphone8-j2a"
                              uses_template: "owntracks_sensor"
                              homeRegionName: "Home"
                    #
                            owntracks_iphone14jay: #entity ID - must be unique
                              name: "iPhone14max Jay" # friendly name
                              prefix: "msrmqtt"
                              topic: "iphone14max-jay"
                              uses_template: "owntracks_sensor"
                              homeRegionName: "CoralBerry"
                    #
                            owntracks_iphone14jen: #entity ID - must be unique
                              name: "iPhone14 Jen" # friendly name
                              prefix: "msrmqtt"
                              topic: "iphone14-jen"
                              uses_template: "owntracks_sensor"
                              homeRegionName: "CoralBerry"
                    #
                            owntracks_iphone14addie: #entity ID - must be unique
                              name: "iPhone14 Addie" # friendly name
                              prefix: "msrmqtt"
                              topic: "iphone14-addie"
                              uses_template: "owntracks_sensor"
                              homeRegionName: "CoralBerry"
                    #
                            owntracks_iphone14bella: #entity ID - must be unique
                              name: "iPhone14 Bella" # friendly name
                              prefix: "msrmqtt"
                              topic: "iphone14-bella"
                              uses_template: "owntracks_sensor"
                              homeRegionName: "CoralBerry"
                    

                    That's my config... and this is my log since replacing/restarting:

                         ... le" content="{"groups": [], "environmentKey" ... 
                                                             ^ [-]
                    [latest-22349]2022-12-19T04:51:40.735Z <MQTTController:CRIT> YAMLException: end of the stream or a document separator is expected at line 21, column 66:
                         ... le" content="{&quot;groups&quot;: [], &quot;environmentKey&quot; ... 
                                                             ^ [-]
                    YAMLException: end of the stream or a document separator is expected at line 21, column 66:
                         ... le" content="{&quot;groups&quot;: [], &quot;environmentKey&quot; ... 
                                                             ^
                        at generateError (/home/reactor/Documents/reactor/node_modules/js-yaml/lib/js-yaml/loader.js:167:10)
                        at throwError (/home/reactor/Documents/reactor/node_modules/js-yaml/lib/js-yaml/loader.js:173:9)
                        at readDocument (/home/reactor/Documents/reactor/node_modules/js-yaml/lib/js-yaml/loader.js:1545:5)
                        at loadDocuments (/home/reactor/Documents/reactor/node_modules/js-yaml/lib/js-yaml/loader.js:1588:5)
                        at load (/home/reactor/Documents/reactor/node_modules/js-yaml/lib/js-yaml/loader.js:1614:19)
                        at Object.safeLoad (/home/reactor/Documents/reactor/node_modules/js-yaml/lib/js-yaml/loader.js:1637:10)
                        at MQTTController._load_implementation (/home/reactor/Documents/reactor/ext/MQTTController/MQTTController.js:753:38)
                        at async MQTTController.start (/home/reactor/Documents/reactor/ext/MQTTController/MQTTController.js:81:13)
                    [latest-22349]2022-12-19T04:51:40.744Z <MQTTController:ERR> MQTTController#mqtt2 can't read/load templates from /home/reactor/Documents/reactor/config/mqtt_templates/owntracks_sensor.yaml: [YAMLException] end of the stream or a document separator is expected at line 21, column 66:
                         ... le" content="{&quot;groups&quot;: [], &quot;environmentKey&quot; ... 
                                                             ^ [-]
                    [latest-22349]2022-12-19T04:51:40.754Z <MQTTController:CRIT> YAMLException: end of the stream or a document separator is expected at line 21, column 66:
                         ... le" content="{&quot;groups&quot;: [], &quot;environmentKey&quot; ... 
                                                             ^ [-]
                    YAMLException: end of the stream or a document separator is expected at line 21, column 66:
                         ... le" content="{&quot;groups&quot;: [], &quot;environmentKey&quot; ... 
                                                             ^
                        at generateError (/home/reactor/Documents/reactor/node_modules/js-yaml/lib/js-yaml/loader.js:167:10)
                        at throwError (/home/reactor/Documents/reactor/node_modules/js-yaml/lib/js-yaml/loader.js:173:9)
                        at readDocument (/home/reactor/Documents/reactor/node_modules/js-yaml/lib/js-yaml/loader.js:1545:5)
                        at loadDocuments (/home/reactor/Documents/reactor/node_modules/js-yaml/lib/js-yaml/loader.js:1588:5)
                        at load (/home/reactor/Documents/reactor/node_modules/js-yaml/lib/js-yaml/loader.js:1614:19)
                        at Object.safeLoad (/home/reactor/Documents/reactor/node_modules/js-yaml/lib/js-yaml/loader.js:1637:10)
                        at MQTTController._load_implementation (/home/reactor/Documents/reactor/ext/MQTTController/MQTTController.js:753:38)
                        at async MQTTController.start (/home/reactor/Documents/reactor/ext/MQTTController/MQTTController.js:81:13)
                    [latest-22349]2022-12-19T04:51:40.759Z <HassController:NOTICE> HassController#hass connecting to ws://192.168.1.198:8123/api/websocket
                    [latest-22349]2022-12-19T04:51:40.766Z <MQTTController:INFO> MQTTController#mqtt instance topic ident is mqtt
                    [latest-22349]2022-12-19T04:51:40.767Z <Controller:INFO> MQTTController#mqtt 0 dead entities older than 86400000s purged
                    [latest-22349]2022-12-19T04:51:40.769Z <MQTTController:NOTICE> MQTTController#mqtt connecting to broker at mqtt://192.168.1.198:1883/
                    [latest-22349]2022-12-19T04:51:40.843Z <MQTTController:INFO> MQTTController#mqtt2 instance topic ident is mqtt2
                    [latest-22349]2022-12-19T04:51:40.844Z <MQTTController:ERR> MQTTController#mqtt2 entity owntracks_iphone14p uses_template=owntracks_sensor, template not defined
                    [latest-22349]2022-12-19T04:51:40.853Z <MQTTController:ERR> MQTTController#mqtt2 entity owntracks_iphone8 uses_template=owntracks_sensor, template not defined
                    [latest-22349]2022-12-19T04:51:40.890Z <MQTTController:ERR> MQTTController#mqtt2 entity owntracks_iphone14jay uses_template=owntracks_sensor, template not defined
                    [latest-22349]2022-12-19T04:51:40.901Z <MQTTController:ERR> MQTTController#mqtt2 entity owntracks_iphone14jen uses_template=owntracks_sensor, template not defined
                    [latest-22349]2022-12-19T04:51:40.914Z <MQTTController:ERR> MQTTController#mqtt2 entity owntracks_iphone14addie uses_template=owntracks_sensor, template not defined
                    [latest-22349]2022-12-19T04:51:40.923Z <MQTTController:ERR> MQTTController#mqtt2 entity owntracks_iphone14bella uses_template=owntracks_sensor, template not defined
                    [latest-22349]2022-12-19T04:51:40.944Z <MQTTController:NOTICE> MQTTController#mqtt2 device owntracks_iphone14addie no longer available, marking BinarySensor#mqtt2>owntracks_iphone14addie for removal
                    [latest-22349]2022-12-19T04:51:40.952Z <MQTTController:NOTICE> MQTTController#mqtt2 device owntracks_iphone14bella no longer available, marking BinarySensor#mqtt2>owntracks_iphone14bella for removal
                    [latest-22349]2022-12-19T04:51:40.960Z <MQTTController:NOTICE> MQTTController#mqtt2 device owntracks_iphone14jay no longer available, marking BinarySensor#mqtt2>owntracks_iphone14jay for removal
                    [latest-22349]2022-12-19T04:51:40.967Z <MQTTController:NOTICE> MQTTController#mqtt2 device owntracks_iphone14jen no longer available, marking BinarySensor#mqtt2>owntracks_iphone14jen for removal
                    [latest-22349]2022-12-19T04:51:40.974Z <MQTTController:NOTICE> MQTTController#mqtt2 device owntracks_iphone14p no longer available, marking BinarySensor#mqtt2>owntracks_iphone14p for removal
                    [latest-22349]2022-12-19T04:51:40.980Z <MQTTController:NOTICE> MQTTController#mqtt2 device owntracks_iphone8 no longer available, marking BinarySensor#mqtt2>owntracks_iphone8 for removal
                    [latest-22349]2022-12-19T04:51:40.987Z <Controller:INFO> MQTTController#mqtt2 0 dead entities older than 86400000s purged
                    [latest-22349]2022-12-19T04:51:40.988Z <MQTTController:NOTICE> MQTTController#mqtt2 connecting to broker at mqtts://7ef71f0117fe40d28c2df12205c4a0d0.s2.eu.hivemq.cloud:8883
                    

                    *Hubitat C-7 2.4.3.177
                    *Proxmox VE v8, Beelink MiniPC 12GBs, SSD

                    *HAOS
                    Core 2026.1.1
                    w/ HA Connect ZWA-2
                    FW: v1.1
                    SDK: v7.23.1

                    *Prod MSR in docker/portainer
                    MSR: latest-26011-c621bbc7
                    MQTTController: 25139
                    ZWave Controller: 25139

                    1 Reply Last reply
                    0
                    • therealdbT therealdb

                      Version 22350 released.
                      What's new:

                      • shelly_button1: for Shelly Button 1 (battery powered button) - all the button modes (short, long, double, triple) are supported.
                      • fullykiosk: to handle messages coming from FullyKiosk. You'll have battery and charging status, screen brightness and current app.

                      What's fixed:

                      • query for all shelly template
                      • owntracks: trying to better handle null values/spurious messages.

                      How to update: just replace the files and restart Reactor.

                      G Offline
                      G Offline
                      gwp1
                      wrote on last edited by
                      #36

                      @therealdb Stand down - I refetched the template file and replaced and everything is fine.

                      🤷♂

                      Bad download, perhaps?

                      *Hubitat C-7 2.4.3.177
                      *Proxmox VE v8, Beelink MiniPC 12GBs, SSD

                      *HAOS
                      Core 2026.1.1
                      w/ HA Connect ZWA-2
                      FW: v1.1
                      SDK: v7.23.1

                      *Prod MSR in docker/portainer
                      MSR: latest-26011-c621bbc7
                      MQTTController: 25139
                      ZWave Controller: 25139

                      therealdbT 1 Reply Last reply
                      1
                      • G gwp1

                        @therealdb Stand down - I refetched the template file and replaced and everything is fine.

                        🤷♂

                        Bad download, perhaps?

                        therealdbT Offline
                        therealdbT Offline
                        therealdb
                        wrote on last edited by
                        #37

                        @gwp1 said in [MSR] reactor-mqtt-contrib package for additional MQTT templates:

                        Bad download, perhaps?

                        Maybe. I'll start packing them in zip files very soon, since MQTTController has the ability to get them from a compressed zip file. I'll do a proper release and things should be easier going on.

                        --
                        On a mission to automate everything.

                        My MS Reactor contrib
                        My Luup Plug-ins

                        G 1 Reply Last reply
                        1
                        • therealdbT therealdb

                          @gwp1 said in [MSR] reactor-mqtt-contrib package for additional MQTT templates:

                          Bad download, perhaps?

                          Maybe. I'll start packing them in zip files very soon, since MQTTController has the ability to get them from a compressed zip file. I'll do a proper release and things should be easier going on.

                          G Offline
                          G Offline
                          gwp1
                          wrote on last edited by gwp1
                          #38

                          @therealdb Many thanks to you and @toggledbits for the combined efforts on this specific app.

                          I've convinced a friend to join us here in the world of MSR. I'd originally written up a reactor.yaml that included his Hubitat and VeraSecure controllers so he could just drop it in and go. I updated that file with multiple entities for each member of his family, had him install MQTTController, and drop the updated version of the config file into his MSR.

                          Created an accompanying install doc for the iOS app customized to their setup and it's working brilliantly. His phone is connected to my HiveMQ cluster which connects his household and mine together so we can do shared presence automations across homes.

                          Love this stuff!

                          EDIT: took it a step further and offloaded my OwnTracks config file, edited a couple details (UserID, etc) and sent it to all members of his family. He added it to OwnTracks and everyone is identical in setup as far as Regions goes and everything is working smashingly.

                          STILL love this stuff 😉

                          *Hubitat C-7 2.4.3.177
                          *Proxmox VE v8, Beelink MiniPC 12GBs, SSD

                          *HAOS
                          Core 2026.1.1
                          w/ HA Connect ZWA-2
                          FW: v1.1
                          SDK: v7.23.1

                          *Prod MSR in docker/portainer
                          MSR: latest-26011-c621bbc7
                          MQTTController: 25139
                          ZWave Controller: 25139

                          1 Reply Last reply
                          2
                          • therealdbT Offline
                            therealdbT Offline
                            therealdb
                            wrote on last edited by therealdb
                            #39

                            I've pushed a new version of my templates, with small fixes everywhere, plus notHomeRegionName to configure the "not home" state (ie: be consistent with Home Assistant, that's using "not_home", if you want) and better handling in general of events. Thanks to @CatmanV2 for the samples!

                            --
                            On a mission to automate everything.

                            My MS Reactor contrib
                            My Luup Plug-ins

                            1 Reply Last reply
                            2
                            • toggledbitsT toggledbits locked this topic on
                            • therealdbT Offline
                              therealdbT Offline
                              therealdb
                              wrote on last edited by
                              #40

                              I've just updated a bunch of templates, and added:

                              • shelly_relay_simple: you know, a simple template for a shelly relay
                              • shelly_scenecontroller: to map Shellies as scene controllers/buttons
                              • shelly_uni_adc: to map Shelly Uni's capabilities to measure ADC.

                              GitHub - dbochicchio/reactor-mqtt-contrib: Contrib MQTT templates for Reactor

                              GitHub - dbochicchio/reactor-mqtt-contrib: Contrib MQTT templates for Reactor

                              Contrib MQTT templates for Reactor. Contribute to dbochicchio/reactor-mqtt-contrib development by creating an account on GitHub.

                              --
                              On a mission to automate everything.

                              My MS Reactor contrib
                              My Luup Plug-ins

                              1 Reply Last reply
                              2
                              • therealdbT Offline
                                therealdbT Offline
                                therealdb
                                wrote on last edited by therealdb
                                #41

                                v 24111 with support for wifi_status just posted to https://github.com/dbochicchio/reactor-mqtt-contrib.

                                My system is stable at the moment and I'm not throwing new things at it, so there is no need for new templates. Let me know if you need a particular template or feel free to contribute.

                                --
                                On a mission to automate everything.

                                My MS Reactor contrib
                                My Luup Plug-ins

                                1 Reply Last reply
                                0
                                • therealdbT Offline
                                  therealdbT Offline
                                  therealdb
                                  wrote on last edited by
                                  #42

                                  v 24146 is out.
                                  Mainly refactoring, with the addition of the first Shelly Gen 3 device (a relay).

                                  GitHub - dbochicchio/reactor-mqtt-contrib: Contrib MQTT templates for Reactor

                                  GitHub - dbochicchio/reactor-mqtt-contrib: Contrib MQTT templates for Reactor

                                  Contrib MQTT templates for Reactor. Contribute to dbochicchio/reactor-mqtt-contrib development by creating an account on GitHub.

                                  --
                                  On a mission to automate everything.

                                  My MS Reactor contrib
                                  My Luup Plug-ins

                                  1 Reply Last reply
                                  0
                                  • therealdbT Offline
                                    therealdbT Offline
                                    therealdb
                                    wrote on last edited by
                                    #43

                                    I got a tons of new Gen3 devices, so expect lots of new templates! 🎉

                                    In the meanwhile, v 24210 is online https://github.com/dbochicchio/reactor-mqtt-contrib/releases/tag/24210

                                    New shelly_relay_power_gen3 to get power meters via Gen3 devices and a couple of fixes here and there.

                                    --
                                    On a mission to automate everything.

                                    My MS Reactor contrib
                                    My Luup Plug-ins

                                    1 Reply Last reply
                                    1
                                    • therealdbT Offline
                                      therealdbT Offline
                                      therealdb
                                      wrote on last edited by
                                      #44

                                      New 24258 released today:

                                      Release 24258 · dbochicchio/reactor-mqtt-contrib

                                      Release 24258 · dbochicchio/reactor-mqtt-contrib

                                      Requires Reactor 24257. New template for HomeKey-ESP32 power_source capability for Fully Kiosk

                                      Requires Reactor 24257.

                                      • New template for HomeKey-ESP32 (more on that very soon)
                                      • power_source capability for Fully Kiosk

                                      --
                                      On a mission to automate everything.

                                      My MS Reactor contrib
                                      My Luup Plug-ins

                                      1 Reply Last reply
                                      0
                                      • therealdbT therealdb unlocked this topic on
                                      • toggledbitsT toggledbits unlocked this topic on
                                      • toggledbitsT toggledbits locked this topic on
                                      • therealdbT Offline
                                        therealdbT Offline
                                        therealdb
                                        wrote on last edited by
                                        #45

                                        Version 25244: https://github.com/dbochicchio/reactor-mqtt-contrib/releases/tag/25244

                                        Add new Shelly Gen3 templates for dimmer and energy meter, modify version in manifest.yaml to 25244, enhance sensor expressions for accuracy, and improve event handling and actions. General refactoring and cleanup across YAML files for consistency and quality.

                                        --
                                        On a mission to automate everything.

                                        My MS Reactor contrib
                                        My Luup Plug-ins

                                        1 Reply Last reply
                                        0
                                        • therealdbT Offline
                                          therealdbT Offline
                                          therealdb
                                          wrote on last edited by
                                          #46

                                          25272: Fixes for shelly_scenecontroller to better handle multiple pushes of the same button.

                                          --
                                          On a mission to automate everything.

                                          My MS Reactor contrib
                                          My Luup Plug-ins

                                          1 Reply Last reply
                                          0
                                          Reply
                                          • Reply as topic
                                          Log in to reply
                                          • Oldest to Newest
                                          • Newest to Oldest
                                          • Most Votes


                                          Recent Topics

                                          • HA and AI
                                            CatmanV2C
                                            CatmanV2
                                            0
                                            1
                                            34

                                          • How to upgrade from an old version of MSR?
                                            CatmanV2C
                                            CatmanV2
                                            0
                                            6
                                            94

                                          • Access control - allowing anonymous user to dashboard
                                            toggledbitsT
                                            toggledbits
                                            0
                                            2
                                            90

                                          • VEC Virtual Switch Auto Off
                                            S
                                            SweetGenius
                                            1
                                            1
                                            65

                                          • Upcoming Storage Change -- Got Back-ups?
                                            toggledbitsT
                                            toggledbits
                                            3
                                            1
                                            59

                                          • Oddness in Copy/Move of Reactions
                                            G
                                            gwp1
                                            0
                                            1
                                            77

                                          • [Solved] function isRuleEnabled() issue
                                            CrilleC
                                            Crille
                                            0
                                            4
                                            146

                                          • [Reactor] Problem with Global Reactions and groups
                                            therealdbT
                                            therealdb
                                            0
                                            3
                                            147

                                          • Possible feature request 2?
                                            CatmanV2C
                                            CatmanV2
                                            0
                                            3
                                            120

                                          • Reactor (Multi-System/Multi-Hub) Announcements
                                            toggledbitsT
                                            toggledbits
                                            5
                                            133
                                            82.2k

                                          • Genuinely impressed with Zigbee and HA / Reactor
                                            CatmanV2C
                                            CatmanV2
                                            1
                                            9
                                            423

                                          • Copying a global reaction
                                            toggledbitsT
                                            toggledbits
                                            0
                                            3
                                            146
                                          Powered by NodeBB | Contributors
                                          Hosted freely by 10RUPTiV - Solutions Technologiques | Contact us
                                          • Login

                                          • Don't have an account? Register

                                          • Login or register to search.
                                          • First post
                                            Last post
                                          0
                                          • Categories
                                          • Recent
                                          • Tags
                                          • Popular
                                          • Unsolved