Good morning,
I'm trying to figure out if there is a way to evaluate if a command was completed and retry if it did not complete.
I have 14 iBlinds 3.1 z-wave controllers in my home. 95% of the time, they work just fine. Occasionally, I'll get a blind that does not open on the first attempt. When I go into Home Assistant, and manually open or close the blind, it works.
I have 3 reactions set up for each room. One to open, one to close, and one partial open for sun glare. Each of them is set up as below.
5afc9924-4300-4718-9e23-8855c4a3a9fd-image.png
The reactions are set up to wait for 5 seconds before going onto the next blind, so the z-wave network doesn't get overwhelmed.
In addition, the set command to run the reactions has "Wait for completion" checked.
3919fc06-c1f1-4c49-bf95-716028d18a27-image.png
I also have a routine set up whenever a z-wave device reports as non-functional (dead), it'll get pinged to wake it up. This usually works to wake them up.
16df4bff-c733-4ec2-a55c-c964238ada3b-image.png
Appreciate any ideas to make this more reliable.
I'm running:
Reactor latest-24190-bd310acc, Bare-metal on Fedora WaveJSController [0.1.23326] Home Assistant: 2024.7.0I think this feature request could be accomplished with the use of two or more rules, but it would be great if there was a way to wait for an event or trigger to occur before continuing on in the reactions.
For example, I have a rule that will turn on some exterior lights if you arrive home after the porch lights have been turned off. Right now this rule randomly will turn off between 5-10 minutes after the person has entered the geofence. On some occasions this 5-10 minutes isn't long enough, say if you are unloading the car or something. I would like to kick off the reaction, but pause it part way through and wait for the door to close and lock, then continue it on. Hubitat Rule Machine has a "Wait for event" option, but I really want to keep all my logic within MSR.
Good morning,
I'm going through my ruleset this morning, trying to get away from haas>blahblablah entries and completely migrate them all to zwavejs>xx-0 entries where possible.
I have 3 Aeon MultiSensor 6 devices in my home, all USB powered.
When using Haas entries, I see an entry for hass>binary_sensor_guest_bedroom_multisensor_home_security_motion_detection, and motion_sensor.state (primary)
Screenshot 2024-07-25 at 8.25.53 AM.png
Under ZwaveJS, this entry appears to be missing.
Screenshot 2024-07-25 at 8.26.51 AM.png
From the Entities page:
battery_power.level=1
battery_power.since=1721910337433
binary_sensor.state=false
humidity_sensor.units="%"
humidity_sensor.value=46
light_sensor.units="Lux"
light_sensor.value=5
tamper.state=false
temperature_sensor.units="°F"
temperature_sensor.value=73.8
x_debug.dt={}
x_zwave_values.Basic_currentValue=0
x_zwave_values.Battery_isLow=false
x_zwave_values.Battery_level=100
x_zwave_values.Binary_Sensor_Any=false
x_zwave_values.Configuration_Automatic_Report_Group_1_Battery_1=1
x_zwave_values.Configuration_Automatic_Report_Group_1_Humidity_64=1
x_zwave_values.Configuration_Automatic_Report_Group_1_Luminance_128=1
x_zwave_values.Configuration_Automatic_Report_Group_1_Temperature_32=1
x_zwave_values.Configuration_Automatic_Report_Group_1_Ultraviolet_16=1
x_zwave_values.Configuration_Automatic_Report_Group_2_Battery_1=0
x_zwave_values.Configuration_Automatic_Report_Group_2_Humidity_64=0
x_zwave_values.Configuration_Automatic_Report_Group_2_Luminance_128=0
x_zwave_values.Configuration_Automatic_Report_Group_2_Temperature_32=0
x_zwave_values.Configuration_Automatic_Report_Group_2_Ultraviolet_16=0
x_zwave_values.Configuration_Automatic_Report_Group_3_Battery_1=0
x_zwave_values.Configuration_Automatic_Report_Group_3_Humidity_64=0
x_zwave_values.Configuration_Automatic_Report_Group_3_Luminance_128=0
x_zwave_values.Configuration_Automatic_Report_Group_3_Temperature_32=0
x_zwave_values.Configuration_Automatic_Report_Group_3_Ultraviolet_16=0
x_zwave_values.Configuration_Automatic_Reporting_Interval_Group_1=3600
x_zwave_values.Configuration_Automatic_Reporting_Interval_Group_2=3600
x_zwave_values.Configuration_Automatic_Reporting_Interval_Group_3=3600
x_zwave_values.Configuration_Automatic_Temperature_Reporting_Unit=2
x_zwave_values.Configuration_Battery_Level_Threshold=10
x_zwave_values.Configuration_Current_Power_Mode_65280=0
x_zwave_values.Configuration_Humidity_Above_Lower_Limit_32=0
x_zwave_values.Configuration_Humidity_Below_Lower_Limit_2=0
x_zwave_values.Configuration_Humidity_Change_Threshold=10
x_zwave_values.Configuration_Humidity_Recover_Limit=5
x_zwave_values.Configuration_Humidity_Sensor_Calibration=0
x_zwave_values.Configuration_LED_Blinking=0
x_zwave_values.Configuration_Lighting_Recover_Limit=10
x_zwave_values.Configuration_Lock_Configuration=0
x_zwave_values.Configuration_Low_Battery_Threshold=20
x_zwave_values.Configuration_Low_Temperature_Alarm_15_C=0
x_zwave_values.Configuration_Lower_Humidity_Limit=50
x_zwave_values.Configuration_Lower_Lighting_Limit=100
x_zwave_values.Configuration_Lower_Temperature_Limit_4294901760=320
x_zwave_values.Configuration_Lower_Temperature_Limit_Unit_3840=2
x_zwave_values.Configuration_Lower_Ultraviolet_Limit=4
x_zwave_values.Configuration_Luminance_Above_Lower_Limit_64=0
x_zwave_values.Configuration_Luminance_Below_Lower_Limit_4=0
x_zwave_values.Configuration_Luminance_Change_Threshold=100
x_zwave_values.Configuration_Luminance_Sensor_Calibration=0
x_zwave_values.Configuration_Motion_Sensor_Report_Type_to_Send=2
x_zwave_values.Configuration_PIR_Sensitivity=3
x_zwave_values.Configuration_PIR_Sensor_Timeout=20
x_zwave_values.Configuration_Recover_Limit_Temperature_Unit_255=2
x_zwave_values.Configuration_Report_Above_Humidity_Threshold_32=0
x_zwave_values.Configuration_Report_Above_Luminance_Threshold_64=0
x_zwave_values.Configuration_Report_Above_Temperature_Threshold_16=0
x_zwave_values.Configuration_Report_Above_Ultraviolet_Threshold_128=0
x_zwave_values.Configuration_Report_Below_Humidity_Threshold_2=0
x_zwave_values.Configuration_Report_Below_Luminance_Threshold_4=0
x_zwave_values.Configuration_Report_Below_Temperature_Threshold_1=0
x_zwave_values.Configuration_Report_Below_Ultraviolet_Threshold_8=0
x_zwave_values.Configuration_Reset_Parameters_101_103_to_Default_Values=null
x_zwave_values.Configuration_Reset_Parameters_111_113_to_Default_Values=null
x_zwave_values.Configuration_Reset_to_Factory_Default_Setting=null
x_zwave_values.Configuration_Selective_Reporting=0
x_zwave_values.Configuration_Sleep_State_255=2
x_zwave_values.Configuration_Temperature_Above_Lower_Limit_16=0
x_zwave_values.Configuration_Temperature_Below_Lower_Limit_1=0
x_zwave_values.Configuration_Temperature_Calibration_Offset_65280=0
x_zwave_values.Configuration_Temperature_Calibration_Unit_255=2
x_zwave_values.Configuration_Temperature_Change_Threshold_4294901760=20
x_zwave_values.Configuration_Temperature_Recover_Limit_65280=20
x_zwave_values.Configuration_Temperature_Threshold_Unit_3840=2
x_zwave_values.Configuration_Ultraviolet_Above_Lower_Limit_128=0
x_zwave_values.Configuration_Ultraviolet_Below_Lower_Limit_8=0
x_zwave_values.Configuration_Ultraviolet_Change_Threshold=2
x_zwave_values.Configuration_Ultraviolet_Recover_Limit=2
x_zwave_values.Configuration_Ultraviolet_Sensor_Calibration=0
x_zwave_values.Configuration_Upper_Humidity_Limit=60
x_zwave_values.Configuration_Upper_Lighting_Limit=1000
x_zwave_values.Configuration_Upper_Temperature_Limit_4294901760=824
x_zwave_values.Configuration_Upper_Temperature_Limit_Unit_3840=2
x_zwave_values.Configuration_Upper_Ultraviolet_Limit=8
x_zwave_values.Configuration_Wake_Device_for_10_minutes_After_Power_On=1
x_zwave_values.Configuration_Wake_Up_Timeout=15
x_zwave_values.Manufacturer_Specific_manufacturerId=134
x_zwave_values.Manufacturer_Specific_productId=100
x_zwave_values.Manufacturer_Specific_productType=258
x_zwave_values.Multilevel_Sensor_Air_temperature=73.8
x_zwave_values.Multilevel_Sensor_Humidity=46
x_zwave_values.Multilevel_Sensor_Illuminance=5
x_zwave_values.Multilevel_Sensor_Ultraviolet=0
x_zwave_values.Notification_Home_Security_Cover_status=0
x_zwave_values.Notification_Home_Security_Motion_sensor_status=0
x_zwave_values.Notification_alarmLevel=0
x_zwave_values.Notification_alarmType=0
x_zwave_values.Version_firmwareVersions=["1.17"]
x_zwave_values.Version_hardwareVersion=100
x_zwave_values.Version_libraryType=3
x_zwave_values.Version_protocolVersion="4.54"
x_zwave_values.Wake_Up_controllerNodeId=1
x_zwave_values.Wake_Up_wakeUpInterval=3600
zwave_device.capabilities=[32,48,49,112,113,114,128,132,134]
zwave_device.endpoint=0
zwave_device.failed=false
zwave_device.generic_class="Multilevel Sensor"
zwave_device.impl_sig="23326:1:22315:1"
zwave_device.is_beaming=false
zwave_device.is_listening=true
zwave_device.is_routing=true
zwave_device.is_secure=false
zwave_device.manufacturer_info=[134,258,100]
zwave_device.max_data_rate=null
zwave_device.node_id=53
zwave_device.specific_class="Routing Multilevel Sensor"
zwave_device.status=4
zwave_device.status_text="alive"
zwave_device.version_info=[null,"1.17"]
zwave_device.wakeup_interval=3600
I'm running:
Reactor latest-24190-bd310acc, Bare-metal on Fedora
WaveJSController [0.1.23326]
Home Assistant: 2024.7.0
I'm fetching certain data five past every hour, but I would like to do it closer to the hour, e.g. 1 or 2 past (but not at the hour).
I experimented with the following rule that almost works (triggers also at the hour which is not the intention). Any advice for a solution?
It would be nice to have an ability to bookmark a direct link to a dashboard item. In my case I would use this feature to access a virtual switch directly.
Hi @toggledbits
Would you please consider adding an extra sublevel in the rulesets?
I have grouped my rules in rooms/ areas. This works great for me, but I would also like to group rules for the same functionality (in a room). This would make the rules easier to find and name.
Please let me know if this is an option. Thanks!
@togglebits I am curious as to why the tilt_sensor.state (primary) = NULL. I believe it should show true or false. I have to use binary_sensor.state instead in my rules.
Again, not sure if this is related to Reactor/ZwaveJSController implementation or the actual Z-Wave JS UI docker version. I have copied, below, the attributes of the tilt sensor in hopes it can help.
Thanks in advance.
Reactor version 23302
ZWaveJSController version 23254
Z-Wave JS UI version 9.3.0.724519f
zwave-js version 12.2.3
@toggledbits,
I have this device attached to my system, but use a DSC panel. If you need testers to move forward, I'm happy to help.
I'm curious what your thinking the use case is for this. I currently have it integrated into HomeAssistant, and it works fine for the most part. The one thing I can't do is bypass zones, which I would like to have the ability to do.
Are you looking at more direct control for the panel, as opposed to having to jump through HA (or another system) first?
Build 21228 has been released. Docker images available from DockerHub as usual, and bare-metal packages here.
Home Assistant up to version 2021.8.6 supported; the online version of the manual will now state the current supported versions; Fix an error in OWMWeatherController that could cause it to stop updating; Unify the approach to entity filtering on all hub interface classes (controllers); this works for device entities only; it may be extended to other entities later; Improve error detail in messages for EzloController during auth phase; Add isRuleSet() and isRuleEnabled() functions to expressions extensions; Implement set action for lock and passage capabilities (makes them more easily scriptable in some cases); Fix a place in the UI where 24-hour time was not being displayed.I have the following ruleset which I though had been working well until this morning when I noticed it's not.
I've put four weather conditions in an in array and one of them is the current weather condition - but the rule is not true. Now the cloud cover percentage is not yet met but this is an or rule so as long as the "Current Conditions" are met then it should go true.
What's the obvious thing I'm missing here? (I've tried spaces/no spaces in the in and no difference.)
Hi,
Running the latest MSR latest-24152-3455578a with the latest HA 2024.6.1. When trying to call a service I get the following in the MSR logs. Is this a version mismatch? I am not seeing anything in the HA logs.
[latest-24152]2024-06-11T10:29:56.162Z <Rule:INFO> rule-Monitor-DHW (rule-lsvq5k3x in Central Heating) started [latest-24152]2024-06-11T10:29:58.625Z <HassController:WARN> HassController#hass unknown service opentherm_gw.set_hot_water_setpoint in x_hass.call_service action on Thermostat#hass>climate_living_room_otgw [latest-24152]2024-06-11T10:29:58.626Z <HassController:INFO> HassController#hass: sending payload for x_hass.call_service on Thermostat#hass>climate_living_room_otgw action: [Object]{ "type": "call_service", "service_data": { "gateway_id": "living_room_otgw", "temperature": 65 }, "domain": "opentherm_gw", "service": "set_hot_water_setpoint", "target": { "entity_id": "climate.living_room_otgw" } } [latest-24152]2024-06-11T10:29:58.627Z <HassController:ERR> HassController#hass request 1718101798626<6/11/2024, 12:29:58 PM> (call_service) failed: [Object]{ "id": 1718101798626, "type": "result", "success": false, "error": { "code": "invalid_format", "message": "extra keys not allowed @ data['entity_id']" } } [latest-24152]2024-06-11T10:29:58.627Z <HassController:WARN> HassController#hass action x_hass.call_service([Object]{ "service": "opentherm_gw.set_hot_water_setpoint", "data": "{ \"gateway_id\": \"living_room_otgw\", \"temperature\": 65 }" }) on Thermostat#hass>climate_living_room_otgw failed!Cheers Rene
Some background
I'm trying to integrate a Zigbee device into the MSR using zigbee2mqtt bridge and MQTTController. The device in question is a cheap mood light that has following properties that I'd like to control:
I'v already managed to get the switch part working and can toggle the light on/off. Also the brightness value is mapped back to MSR. In zigbee2mqtt it has a value range from 0 to 254, so this the reason for the expression:
expr: 'payload.brightness / 254'Here's the entity definition (don't know whether the type should be something else than the Switch)
zigbee-lidl-mood-light: name: 'Lidl Mood Light' friendly_name: 'Mood Light' type: Switch uses_template: lidl-moodlightAnd the corresponding template (NOTE: rgb_color has not been defined in this example):
lidl-moodlight: init: "zigbee2mqtt/%friendly_name%/get/state" query: "zigbee2mqtt/%friendly_name%/get/state" capabilities: - power_switch - toggle - dimming primary_attribute: power_switch.state events: "zigbee2mqtt/%friendly_name%": "power_switch.state": json_payload: true expr: 'upper(payload.state) == "ON"' "dimming.level": json_payload: true expr: 'payload.brightness / 254' actions: power_switch: "on": topic: "zigbee2mqtt/%friendly_name%/set/state" payload: 'ON' "off": topic: "zigbee2mqtt/%friendly_name%/set/state" payload: 'OFF' set: topic: "zigbee2mqtt/%friendly_name%/set/state" payload: expr: "parameters.state ? 'ON' : 'OFF'" type: raw toggle: topic: "zigbee2mqtt/%friendly_name%/set/state" payload: 'TOGGLE'The problem
In order to control the brightness or the RGB color values, I would have send a JSON payload in corresponding actions. But I have no idea how to define it in the template. The reason why the switch part is working is that the zigbee2mqtt accepts also plain ON / OFF / TOGGLE string payloads in that case.
But the brightness should be controlled with the following payload:
{"brightness": 196}And the RGB color like:
{"color":{"rgb":"46,102,150"}}Here's the link for the documentation (the Exposes part defines the messages).
So how should I define the JSON payload for example for the dimming action? It definitely should be some sort of expressions since I have to map the MSR real value (0...1) to (0...254) for the zigbee2mqtt.
actions: dimming: set: topic: "zigbee2mqtt/%friendly_name%/set" payload: expr: ????? type: jsonAnother problem is the RGB value. I could use the rgb_color capability for the setting but the problem is that the zigbee2mqtt only reports the current color in hue/saturation or xy coordinates.
Here's an example of published message after setting the color:
Topic: zigbee2mqtt/Mood Light QoS: 0 { "brightness":254, "color":{ "hue":240, "saturation":100, "x":0.1355, "y":0.0399 }, "color_mode":"xy", "color_temp":574, "linkquality":96, "state":"ON" }I would have to map those values back to RGB, but is it even possible with existing constructs in MQTTController's templates?
Help would be appreciated @toggledbits
br,
mgvra
That's probably more appropriate to post on Mantis for @toggledbits, but since I know there's at least @Crille publishing templates, my intent with this post is to open a broader discussion.
Long story short: I'm starting to slowly add new template for Shelly Plus and I noticed I'll end up with a dozen more templates, all similar but simply different in trivial details, all sharing a large amount of code and all needing special cares when fixing bugs/adding features (as the latest wifi_status addition).
So, I'm wondering if it's time to start thinking of some sort of inheritance in templates, where I could just create a generic shelly_gen1 and use it as a base for shelly_relay, and this be used as the base for shelly_relay_power and so on.
I could probably achieve this with some sort of scripting on my side to generate templates via code, but maybe there's a better way of doing this, or it's already on the radar.
I need a handful of victims volunteers to help test previews of the next build of Reactor. A long-standing request was for "a simple login mechanism," but in practice, adding user authentication and competent access control turned out to be a pretty big project with a lot of big changes on both server and client sides. It's a bit more than I'm comfortable testing myself and springing out to everyone at once, so I'd like to work with a small group to put it through "sea trials."
Major changes/features include:
User authentication with hashed password storage; User group configuration with application restriction (admin, dashboard, API); Detailed control over API access, with user- and token-based authentication/authorization; Improvements to the HTTPS service; Improvements to UI coordination with the core for Rules and Reactions.If this sounds like something you'd like to help with, drop me a reply here in this thread or privately.
[Solution: Reactor 24115 is not compatible with MQTTController > 24120]
Reactor latest-24115 bare metal.
All MQTT entities stop working after updating MQTTController to 24142, downgrade to 24120 and they are back. Templates and configured entities has not been changed between versions.
I'm not sure if uses_template should be replaced by ìnclude in entity configuration in reactor.yaml but I guess not, I've tried it and it did not do any difference.
I have not tried to update Reactor to userauth version.
Example entity in reactor.yaml that uses MQTTController included template:
entities: "takflakt_kallare": name: "Takfläkt källare" topic: "Källartemp" unit: "" uses_template: tasmota_generic_relay init: "cmnd/%topic%/POWER%unit%"Any hints? Do you need more info, please let me know.
Log from startup:
I'm slowly migrating all my stuff to MQTT under MSR, so I have a central place to integrate everything (and, in a not-so-distant future, to remove virtual devices from my Vera and leave it running zwave only).
Anyway, here's my reactor-mqtt-contrib package:
![](https://github.com/fluidicon.png)
Contrib MQTT templates for Reactor. Contribute to dbochicchio/reactor-mqtt-contrib development by creating an account on GitHub.
Simply download yaml files (everything or just the ones you need) and you're good to go.
I have mapped my most useful devices, but I'll add others soon. Feel free to ask for specific templates, since I've worked a lot in the last weeks to understand and operate them.
The templates are supporting both init and query, so you have always up-to-date devices at startup, and the ability to poll them. Online status is supported as well, so you can get disconnected devices with a simple expression.
Many-many thanks to @toggledbits for its dedication, support, and patience with me and my requests 🙂
Is the following config correct?
- id: time_series name: "Out temp" capabilities: temperature_sensor: attributes: value: model: time series entity: "hass>sensor_outdoor_temperature" attribute: "temperature_sensor.value" interval: 5 # minutes retention: 20 # minutes aggregate: wma primary_attribute: temperature_sensor.value type: ValueSensorSpecifically, is "depth" directive needed/mandatory here? Reason I'm asking is that I'm not getting a "final" value in MSR, only debug values are shown:
temperature_sensor.units=null temperature_sensor.value=null x_virtualentity.last_request_time=null x_virtualentity.request_failures=null x_virtualentity.template=null x_virtualentity.timeseries_debug=[{"time":1716537360000,"value":22.1},{"time":1716537660000,"value":22},{"time":1716537960000,"value":22},{"time":1716538260000,"value":21.9},{"time":1716538560000,"value":22}]Good morning,
I apologize if this subject has been covered. I did try the search, but I'm not coming up with any topics on my issue.
I'm running userauth-24137-57b41335, bare metal installation on Fedora 39 Server.
I have a rule set up to turn the Eco mode off on my Nest Thermostat when the thermostat is set to Away (Rule State: Away Mode), the user (Driver) presence in my car changes to true, and the destination is set to home.
93804f7c-62d6-42c0-ae04-ff602011a6fd-image.png
This works fine for most days, where I'm headed home from work (commute is about 45 minutes). What I don't want it to do is set change it to Eco mode if my ETA is more than an hour.
There is a sensor/entity for Time to Arrival when the Destination is set. What it appears to provide is the Time OF arrival/ETA, not time until arrival. If it was Time until Arrival, and it was a numeric value, I could simply test if the value is less than 60 and be done with it.
I pulled up the history through Home Assistant for my morning commute and this appears to be what it is providing.
c2a32739-c84f-4a05-95d9-73793ed818f5-image.png
So what I need to do is to do a calculation of the the ETA from the sensor value and subtract the current time, and get a value in minutes that I can determine if it's less than 60.
I believe I can do this with the local expression, but I don't see anything for the system time, or local time. Also, do the local expressions update themselves if the sensors do?
Good morning,
I'm running userauth-24137-57b41335 on Fedora 39, bare metal installation.
ZWaveJSController 0.1.23254
Home Assistant:
Core, 2024.5.3 Supervisor, 2024.05.1 Operating System, 12.3 Frontend, 20240501.1I'm trying to troubleshoot a Dynamic Group Controller and notification alert that I've set up for low battery level.
In my Reactor.config, I have the following lines:
name: "Dynamic Group Controller" implementation: DynamicGroupController config: groups: "zwavejs_dead": select: - include_group: "zwavejs" filter_expression: "entity?.attributes?.zwave_device?.status == 3" group_actions: true "low_battery": select: - include_capability: battery_power filter_expression: > entity.attributes.battery_power.level < 0.35The idea here is that I should only have members of this group that have a battery level below 35%. When I go into Entities, I show a whole slew of devices, none of which have a battery level below the threshold.
a77e445b-ab78-4752-a624-3c4117f34f90-image.png
I also tried setting up a rule to generate a push notification once a day, but with all of the group members, I've had to disable the rule. I believe I have it set up correctly, but I'm not 100% sure. I want the notification to tell me the battery level for that device as well.
289b4f68-03ba-49c0-8275-f0f197d13a3a-image.png
ce24a76e-6865-40bd-bd85-632e54d315a8-image.png dc837424-deb5-4ef7-8f0d-3676f1769535-image.png
Can anyone point to me what I may have misconfigured to get these results?
I should also note I'm only interested in ZWaveJS devices. It's showing me battery status for my iPad and car as well, which I don't need it to send me.
Expressions page showing old data
-
Hi @toggledbits,
I seem to be having the same issue. Is it possible that the expressions are only saved to the json when a restart of Reactor is done?
Today I looked in Reactor and saw an old version of all my expressions. My latest changes were gone (done a few days ago). Reactor didn't have a restart in the meantime.
When I recreated all new expressions and looked in expression.json, the new expressions weren't there (yet). After I did a restart of Reactor, the changes were visible.
Which moments are the expressions saved to the file?
I'm not running the add-on, but the docker. I do not have the latest update yet (latest-23114-e4060aae)
This doesn't explain why my changes were gone, but I'm still tinkering about that. Maybe my backup messes something up.
-
@RHCPNG said in Home Assistant add-on:
I'm not running the add-on, but the docker.
Well, then you're posting in the wrong thread. This thread is for the add-on (only). I'll move the post, but in future, please consider the relevance of your question to the subject (i.e. title) of the thread, not something any part of contents may mention in its progress. Check the posting guidelines as well.
Always refresh your browser when things look "old" as a first step, rather than restarting Reactor. In particular, if the changes were made in a different browser, it's quite possible the "other" browser would continue to show out of date expressions.
-
Sorry for posting in the other thread, but the problem didn't seem to only be applicable to the add-on.
You don't understand the problem fully. The browser was not the problem. The changes were gone in the expressions.json.
After doing the changes again in the browser, the changes were still not visible in the json. Only after a restart, they were visible in the json.
-
That's correct. The caching doesn't save the changes to the JSON until Reactor shuts down. The changes are present in the engine's structure data, nonetheless.
-
Is it possible to save it more often? I have to figure out what's causing the loss of the expressions, but for now my backup is "worthless". Now, the only way to get the expressions back would be a restore of a full backup of the docker files, but then I will potentially lose other changes.
Any idea why I only lose the expressions and not other changes that are done later?
-
Let's make sure you are getting an orderly shutdown of your container. Try stopping your container (not restarting, just stopping), and then examine the
reactor.log
file. You should see a series of messages that begins as follows (the signal named may vary somewhat)...[###BUILDVERSION###]2023-06-21T15:32:35.467Z <app:NOTICE> Shutdown signal (SIGTERM) received. Stopping Reaction Engine... [###BUILDVERSION###]2023-06-21T15:32:35.467Z <app:NOTICE> Closing APIs... [###BUILDVERSION###]2023-06-21T15:32:35.467Z <wsapi:NOTICE> wsapi: closing... [###BUILDVERSION###]2023-06-21T15:32:35.467Z <httpapi:NOTICE> HTTP API closing... [###BUILDVERSION###]2023-06-21T15:32:35.468Z <app:NOTICE> Stopping Engine...
The messages that follow should be free of errors and point to an orderly shutdown ending with:
[###BUILDVERSION###]2023-06-20T14:57:44.866Z <Structure:NOTICE> Structure Structure#1 stopped [###BUILDVERSION###]2023-06-20T14:57:44.866Z <app:NOTICE> Stopping timers... [###BUILDVERSION###]2023-06-20T14:57:44.866Z <app:NOTICE> Shutdown complete, process ID 1870702
If you see any errors or things that look odd, post them in reply here (please format properly -- see the posting guidelines if you need advice/help).
-
The exit procedure seems fine.
[latest-23114]2023-06-21T17:47:59.159Z <Rule:INFO> Windows open (rule-grp1myo029o in Weer) starting evaluation; because expression-state-changed GlobalExpression#gTempOutside [latest-23114]2023-06-21T17:47:59.159Z <Rule:INFO> Windows closed (rule-grp1mznck5b in Weer) starting evaluation; because expression-state-changed GlobalExpression#gTempOutside [latest-23114]2023-06-21T17:47:59.160Z <Rule:INFO> Windows open (rule-grp1myo029o in Weer) trigger evaluation result is true (previously true) [latest-23114]2023-06-21T17:47:59.160Z <Rule:INFO> Windows open (rule-grp1myo029o in Weer) evaluated; trigger state unchanged (true); rule state remains SET [latest-23114]2023-06-21T17:47:59.161Z <Rule:INFO> Windows closed (rule-grp1mznck5b in Weer) trigger evaluation result is false (previously false) [latest-23114]2023-06-21T17:47:59.162Z <Rule:INFO> Windows closed (rule-grp1mznck5b in Weer) evaluated; trigger state unchanged (false); rule state remains RESET [latest-23114]2023-06-21T17:47:59.162Z <Rule:INFO> Windows open (rule-grp1myo029o in Weer) evaluation complete [latest-23114]2023-06-21T17:47:59.162Z <Rule:INFO> Windows closed (rule-grp1mznck5b in Weer) evaluation complete [latest-23114]2023-06-21T17:48:07.032Z <app:NOTICE> Shutdown signal (SIGTERM) received. Stopping Reaction Engine... [latest-23114]2023-06-21T17:48:07.034Z <app:NOTICE> Closing APIs... [latest-23114]2023-06-21T17:48:07.035Z <wsapi:NOTICE> wsapi: closing... [latest-23114]2023-06-21T17:48:07.036Z <httpapi:NOTICE> HTTP API closing... [latest-23114]2023-06-21T17:48:07.036Z <app:NOTICE> Stopping Engine... [latest-23114]2023-06-21T17:48:07.039Z <Rule:NOTICE> Motor op lader (rule-liot7yyg in Garage) stopping [latest-23114]2023-06-21T17:48:07.039Z <Rule:NOTICE> Zonnescherm auto IN (rule-lipp4379 in Tuin) stopping [latest-23114]2023-06-21T17:48:07.039Z <Rule:NOTICE> Zonnescherm auto UIT (rule-lhdixs68 in Tuin) stopping [latest-23114]2023-06-21T17:48:07.039Z <Rule:NOTICE> Disk space low (rule-lgyxocj5 in System) stopping [latest-23114]2023-06-21T17:48:07.039Z <Rule:NOTICE> Niels at home (rule-lg7vjm7n in Proximity) stopping [latest-23114]2023-06-21T17:48:07.042Z <Rule:NOTICE> Tessa at home (rule-lg7v960f in Proximity) stopping [latest-23114]2023-06-21T17:48:07.043Z <Rule:NOTICE> Tessa driving (rule-lg7v6f3w in Proximity) stopping [latest-23114]2023-06-21T17:48:07.043Z <Rule:NOTICE> Tessa at work (rule-lg7v3cm6 in Proximity) stopping [latest-23114]2023-06-21T17:48:07.043Z <Rule:NOTICE> Tessa at S&K (rule-lg7uxvzo in Proximity) stopping [latest-23114]2023-06-21T17:48:07.088Z <Rule:NOTICE> Windows open (rule-grp1myo029o in Weer) stopping [latest-23114]2023-06-21T17:48:07.088Z <Rule:NOTICE> Windows closed (rule-grp1mznck5b in Weer) stopping [latest-23114]2023-06-21T17:48:07.088Z <wsapi:NOTICE> wsapi: server closed [latest-23114]2023-06-21T17:48:07.089Z <httpapi:INFO> HTTP server closed. [latest-23114]2023-06-21T17:48:07.090Z <Rule:NOTICE> Motor op lader (rule-liot7yyg in Garage) stopped [latest-23114]2023-06-21T17:48:07.091Z <Rule:NOTICE> Zonnescherm auto IN (rule-lipp4379 in Tuin) stopped [latest-23114]2023-06-21T17:48:07.094Z <Rule:NOTICE> Zonnescherm auto UIT (rule-lhdixs68 in Tuin) stopped [latest-23114]2023-06-21T17:48:07.095Z <Rule:NOTICE> Disk space low (rule-lgyxocj5 in System) stopped [latest-23114]2023-06-21T17:48:07.096Z <Rule:NOTICE> Niels at home (rule-lg7vjm7n in Proximity) stopped [latest-23114]2023-06-21T17:48:07.097Z <Rule:NOTICE> Tessa at home (rule-lg7v960f in Proximity) stopped [latest-23114]2023-06-21T17:48:07.098Z <Rule:NOTICE> Tessa driving (rule-lg7v6f3w in Proximity) stopped [latest-23114]2023-06-21T17:48:07.099Z <Rule:NOTICE> Tessa at work (rule-lg7v3cm6 in Proximity) stopped [latest-23114]2023-06-21T17:48:07.100Z <Rule:NOTICE> Tessa at S&K (rule-lg7uxvzo in Proximity) stopped [latest-23114]2023-06-21T17:48:07.101Z <Rule:NOTICE> Windows open (rule-grp1myo029o in Weer) stopped [latest-23114]2023-06-21T17:48:07.102Z <Rule:NOTICE> Windows closed (rule-grp1mznck5b in Weer) stopped [latest-23114]2023-06-21T17:48:07.111Z <Engine:NOTICE> [Engine]Engine#1 has shut down. [latest-23114]2023-06-21T17:48:07.112Z <app:NOTICE> Closing Structure... [latest-23114]2023-06-21T17:48:07.112Z <Structure:NOTICE> Structure#1 Stopping controllers... [latest-23114]2023-06-21T17:48:07.112Z <Structure:INFO> Structure#1 stopping VeraController#openluup [latest-23114]2023-06-21T17:48:07.113Z <Controller:NOTICE> VeraController#openluup stopping [latest-23114]2023-06-21T17:48:07.117Z <Controller:ERR> Controller VeraController#openluup is off-line! [latest-23114]2023-06-21T17:48:07.952Z <Structure:INFO> Structure#1 stopping HassController#hass [latest-23114]2023-06-21T17:48:07.952Z <HassController:NOTICE> HassController#hass stopping [latest-23114]2023-06-21T17:48:07.965Z <wsapi:WARN> client close from unknown connection? "192.168.1.174#25" [latest-23114]2023-06-21T17:48:07.966Z <wsapi:WARN> client close from unknown connection? "192.168.1.174#24" [latest-23114]2023-06-21T17:48:07.983Z <HassController:NOTICE> HassController#hass websocket closing, 1000 [latest-23114]2023-06-21T17:48:07.985Z <Controller:NOTICE> HassController#hass stopping [latest-23114]2023-06-21T17:48:07.988Z <Controller:ERR> Controller HassController#hass is off-line! [latest-23114]2023-06-21T17:48:09.266Z <Structure:INFO> Structure#1 stopping DynamicGroupController#groups [latest-23114]2023-06-21T17:48:09.266Z <DynamicGroupController:null> DynamicGroupController#groups stopping [latest-23114]2023-06-21T17:48:09.267Z <Controller:NOTICE> DynamicGroupController#groups stopping [latest-23114]2023-06-21T17:48:09.268Z <Controller:ERR> Controller DynamicGroupController#groups is off-line! [latest-23114]2023-06-21T17:48:09.279Z <Structure:INFO> Structure#1 stopping SystemController#reactor_system [latest-23114]2023-06-21T17:48:09.279Z <Controller:NOTICE> SystemController#reactor_system stopping [latest-23114]2023-06-21T17:48:09.281Z <Controller:ERR> Controller SystemController#reactor_system is off-line! [latest-23114]2023-06-21T17:48:09.288Z <Structure:INFO> Structure#1 Final data sync... [latest-23114]2023-06-21T17:48:09.288Z <default:INFO> Closing container Container#rulesets [latest-23114]2023-06-21T17:48:09.289Z <default:INFO> Closing container Container#rules [latest-23114]2023-06-21T17:48:09.289Z <default:INFO> Closing container Container#reactions [latest-23114]2023-06-21T17:48:09.289Z <default:INFO> Closing container Container#states [latest-23114]2023-06-21T17:48:09.316Z <default:INFO> Closing container Container#default [latest-23114]2023-06-21T17:48:09.316Z <default:INFO> Closing container Container#expressions [latest-23114]2023-06-21T17:48:09.318Z <Structure:NOTICE> Structure Structure#1 stopped [latest-23114]2023-06-21T17:48:09.319Z <app:NOTICE> Stopping timers... [latest-23114]2023-06-21T17:48:09.319Z <app:NOTICE> Shutdown complete, process ID 1
I did get a disk space notification, so my first thought was that that was the problem. But I believe there always was enough space, more than 1 gb at least.
Does Reactor do something more then only give a signal that disk space is low? Maybe save the cache or something in that line.
-
Reactor warns only when disk space starts to get low. There are attributes saved where you can write rules to respond, but Reactor doesn't take any action of its own.
-
The only lead I have is the disk space, I don't know what else it could be, although I cleared some space as soon as I got the notification.
I don't know what to do to further analyze this. I will monitor this and see if it happens again.
It would be helpful if Reactor could save the expressions to the json more often.
-
Restarting reactor from reactor itself after changing any global expressions or making new global expressions is doing the trick for me currently.
But I am using MSR via the unofficial addon by @mrw298 .