-
Post has been updated.
Need some guidance in determining what this error means.
Running Reactor latest-23078-d592d400; ZWaveJSController; Docker on Synology; Home Assistant 2023.3.6; Z-Wave JS UI 8.11.1
I have searched the site and could not find anything related to my question.
I know what the rule does. Yet, I cannot find the relationship with this error.
If someone could point me in the right direction, it would be appreciated.
Thanks in advance
Rule is as follow:
If the garage side door opens when the alarm is not armed and that both my spouse and I are at home:
Set Reaction: turn on the Siren_8 (basically a two seconds beep that was configured with the Aeotec Siren to warn us that the door is open)
Reset Reaction: turn off the Siren_8 in case it wants to keep beeping
Here's the updated error.
[latest-23078]2023-03-26T22:31:36.772Z <Rule:INFO> Door Sensors State (rule-lerjv6if in Control Room) starting evaluation; because entity-changed BinarySensor#hass>binary_sensor_garage_side_door_openclose_window_door_is_open [latest-23078]2023-03-26T22:31:36.772Z <Rule:INFO> Notification: Home Security - Garage side door just opened (Disarmed Only) (rule-lbmoup28 in Notifications) starting evaluation; because entity-changed BinarySensor#hass>binary_sensor_garage_side_door_openclose_window_door_is_open [latest-23078]2023-03-26T22:31:36.773Z <Rule:INFO> Any door open? (rule-lfn41thm in Home Security) trigger evaluation result is false (previously true) [latest-23078]2023-03-26T22:31:36.773Z <Rule:INFO> Any door open? (rule-lfn41thm in Home Security) evaluated; rule state transition from SET to RESET! [latest-23078]2023-03-26T22:31:36.782Z <Rule:INFO> Door Sensors State (rule-lerjv6if in Control Room) trigger evaluation result is false (previously true) [latest-23078]2023-03-26T22:31:36.783Z <Rule:INFO> Door Sensors State (rule-lerjv6if in Control Room) evaluated; rule state transition from SET to RESET! [latest-23078]2023-03-26T22:31:36.790Z <Rule:INFO> Notification: Home Security - Garage side door just opened (Disarmed Only) (rule-lbmoup28 in Notifications) trigger evaluation result is false (previously true) [latest-23078]2023-03-26T22:31:36.791Z <Rule:INFO> Notification: Home Security - Garage side door just opened (Disarmed Only) (rule-lbmoup28 in Notifications) evaluated; rule state transition from SET to RESET! [latest-23078]2023-03-26T22:31:36.799Z <Rule:INFO> Alarm triggered (rule-lbqu752y in Home Security) starting evaluation; because data-changed Data#states:cs-rule-lfn41thm [latest-23078]2023-03-26T22:31:36.799Z <Rule:INFO> Toggle Vestibule scene 003 LED color state between green/blue (rule-lfn441bq in Home Security) starting evaluation; because data-changed Data#states:cs-rule-lfn41thm [latest-23078]2023-03-26T22:31:36.800Z <Rule:INFO> Any door open? (rule-lfn41thm in Home Security) evaluation complete [latest-23078]2023-03-26T22:31:36.800Z <Rule:INFO> Door Sensors State (rule-lerjv6if in Control Room) evaluation complete [latest-23078]2023-03-26T22:31:36.800Z <Rule:INFO> Notification: Home Security - Garage side door just opened (Disarmed Only) (rule-lbmoup28 in Notifications) evaluation complete [latest-23078]2023-03-26T22:31:36.801Z <Rule:INFO> Alarm triggered (rule-lbqu752y in Home Security) trigger evaluation result is false (previously true) [latest-23078]2023-03-26T22:31:36.802Z <Rule:INFO> Alarm triggered (rule-lbqu752y in Home Security) evaluated; trigger state changed (false), but rule state remains RESET [latest-23078]2023-03-26T22:31:36.804Z <Rule:INFO> Toggle Vestibule scene 003 LED color state between green/blue (rule-lfn441bq in Home Security) trigger evaluation result is false (previously true) [latest-23078]2023-03-26T22:31:36.804Z <Rule:INFO> Toggle Vestibule scene 003 LED color state between green/blue (rule-lfn441bq in Home Security) evaluated; rule state transition from SET to RESET! [latest-23078]2023-03-26T22:31:36.812Z <Rule:INFO> Alarm triggered (rule-lbqu752y in Home Security) evaluation complete [latest-23078]2023-03-26T22:31:36.812Z <Rule:INFO> Toggle Vestibule scene 003 LED color state between green/blue (rule-lfn441bq in Home Security) evaluation complete [latest-23078]2023-03-26T22:31:36.814Z <Engine:INFO> Enqueueing "Door Sensors State<RESET>" (rule-lerjv6if:R) [latest-23078]2023-03-26T22:31:36.815Z <Engine:INFO> Enqueueing "Notification: Home Security - Garage side door just opened (Disarmed Only)<RESET>" (rule-lbmoup28:R) [latest-23078]2023-03-26T22:31:36.817Z <Engine:INFO> Enqueueing "Toggle Vestibule scene 003 LED color state between green/blue<RESET>" (rule-lfn441bq:R) [latest-23078]2023-03-26T22:31:36.819Z <Engine:NOTICE> Starting reaction Door Sensors State<RESET> (rule-lerjv6if:R) [latest-23078]2023-03-26T22:31:36.820Z <Engine:NOTICE> Starting reaction Notification: Home Security - Garage side door just opened (Disarmed Only)<RESET> (rule-lbmoup28:R) [latest-23078]2023-03-26T22:31:36.822Z <Engine:NOTICE> Starting reaction Toggle Vestibule scene 003 LED color state between green/blue<RESET> (rule-lfn441bq:R) [latest-23078]2023-03-26T22:31:36.823Z <ZWaveJSController:INFO> ZWaveJSController#zwavejs performing zwave_device.set_config on Switch#zwavejs>128-0 with [Object]{ "parameter": "9", "size": 1, "value": 2, "bitmask": 0 } [latest-23078]2023-03-26T22:31:36.830Z <HassController:INFO> HassController#hass action x_hass_input_text.set_value([Object]{ "value": "Closed" }) on Entity#hass>input_text_h_door_sensors_state succeeded [latest-23078]2023-03-26T22:31:36.831Z <Engine:INFO> Resuming reaction Door Sensors State<RESET> (rule-lerjv6if:R) from step 1 [latest-23078]2023-03-26T22:31:36.832Z <Engine:INFO> Door Sensors State<RESET> all actions completed. [latest-23078]2023-03-26T22:31:37.043Z <Rule:INFO> Batteries State (rule-leucn9pp in Control Room) starting evaluation; because entity-changed ValueSensor#hass>sensor_garage_side_door_openclose_battery_level [latest-23078]2023-03-26T22:31:37.044Z <Rule:INFO> Notification: Battery - Low level warning (rule-lbh1vt4k in Notifications) starting evaluation; because entity-changed ValueSensor#hass>sensor_garage_side_door_openclose_battery_level [latest-23078]2023-03-26T22:31:37.045Z <Rule:INFO> Batteries State (rule-leucn9pp in Control Room) trigger evaluation result is true (previously true) [latest-23078]2023-03-26T22:31:37.046Z <Rule:INFO> Batteries State (rule-leucn9pp in Control Room) evaluated; trigger state unchanged (true); rule state remains SET [latest-23078]2023-03-26T22:31:37.060Z <Rule:INFO> Notification: Battery - Low level warning (rule-lbh1vt4k in Notifications) trigger evaluation result is true (previously true) [latest-23078]2023-03-26T22:31:37.060Z <Rule:INFO> Notification: Battery - Low level warning (rule-lbh1vt4k in Notifications) evaluated; trigger state unchanged (true); rule state remains SET [latest-23078]2023-03-26T22:31:37.062Z <Rule:INFO> Batteries State (rule-leucn9pp in Control Room) evaluation complete [latest-23078]2023-03-26T22:31:37.062Z <Rule:INFO> Notification: Battery - Low level warning (rule-lbh1vt4k in Notifications) evaluation complete [latest-23078]2023-03-26T22:31:37.146Z <Rule:INFO> Notification: Battery - Low level warning (rule-lbh1vt4k in Notifications) starting evaluation; because entity-changed Group#groups>low_battery [latest-23078]2023-03-26T22:31:37.156Z <Rule:INFO> Notification: Battery - Low level warning (rule-lbh1vt4k in Notifications) trigger evaluation result is true (previously true) [latest-23078]2023-03-26T22:31:37.157Z <Rule:INFO> Notification: Battery - Low level warning (rule-lbh1vt4k in Notifications) evaluated; trigger state unchanged (true); rule state remains SET [latest-23078]2023-03-26T22:31:37.157Z <Rule:INFO> Notification: Battery - Low level warning (rule-lbh1vt4k in Notifications) evaluation complete [latest-23078]2023-03-26T22:31:37.161Z <Engine:INFO> Resuming reaction Toggle Vestibule scene 003 LED color state between green/blue<RESET> (rule-lfn441bq:R) from step 2 [latest-23078]2023-03-26T22:31:37.162Z <Engine:INFO> Toggle Vestibule scene 003 LED color state between green/blue<RESET> all actions completed. [latest-23078]2023-03-26T22:31:37.316Z <HassController:INFO> HassController#hass action x_hass_siren.turn_off([Object]{ }) on Entity#hass>siren_siren_8 succeeded [latest-23078]2023-03-26T22:31:37.317Z <Engine:INFO> Resuming reaction Notification: Home Security - Garage side door just opened (Disarmed Only)<RESET> (rule-lbmoup28:R) from step 2 [latest-23078]2023-03-26T22:31:37.317Z <Engine:INFO> Notification: Home Security - Garage side door just opened (Disarmed Only)<RESET> all actions completed. [latest-23078]2023-03-26T22:31:38.892Z <Rule:INFO> Any door open? (rule-lfn41thm in Home Security) starting evaluation; because entity-changed BinarySensor#hass>binary_sensor_garage_side_door_openclose_window_door_is_open [latest-23078]2023-03-26T22:31:38.892Z <Rule:INFO> Door Sensors State (rule-lerjv6if in Control Room) starting evaluation; because entity-changed BinarySensor#hass>binary_sensor_garage_side_door_openclose_window_door_is_open [latest-23078]2023-03-26T22:31:38.893Z <Rule:INFO> Notification: Home Security - Garage side door just opened (Disarmed Only) (rule-lbmoup28 in Notifications) starting evaluation; because entity-changed BinarySensor#hass>binary_sensor_garage_side_door_openclose_window_door_is_open [latest-23078]2023-03-26T22:31:38.894Z <Rule:INFO> Any door open? (rule-lfn41thm in Home Security) trigger evaluation result is true (previously false) [latest-23078]2023-03-26T22:31:38.894Z <Rule:INFO> Any door open? (rule-lfn41thm in Home Security) evaluated; rule state transition from RESET to SET! [latest-23078]2023-03-26T22:31:38.907Z <Rule:INFO> Door Sensors State (rule-lerjv6if in Control Room) trigger evaluation result is true (previously false) [latest-23078]2023-03-26T22:31:38.907Z <Rule:INFO> Door Sensors State (rule-lerjv6if in Control Room) evaluated; rule state transition from RESET to SET! [latest-23078]2023-03-26T22:31:38.916Z <Rule:INFO> Notification: Home Security - Garage side door just opened (Disarmed Only) (rule-lbmoup28 in Notifications) trigger evaluation result is true (previously false) [latest-23078]2023-03-26T22:31:38.917Z <Rule:INFO> Notification: Home Security - Garage side door just opened (Disarmed Only) (rule-lbmoup28 in Notifications) evaluated; rule state transition from RESET to SET! [latest-23078]2023-03-26T22:31:38.925Z <Rule:INFO> Alarm triggered (rule-lbqu752y in Home Security) starting evaluation; because data-changed Data#states:cs-rule-lfn41thm [latest-23078]2023-03-26T22:31:38.925Z <Rule:INFO> Toggle Vestibule scene 003 LED color state between green/blue (rule-lfn441bq in Home Security) starting evaluation; because data-changed Data#states:cs-rule-lfn41thm [latest-23078]2023-03-26T22:31:38.926Z <Rule:INFO> Any door open? (rule-lfn41thm in Home Security) evaluation complete [latest-23078]2023-03-26T22:31:38.926Z <Rule:INFO> Door Sensors State (rule-lerjv6if in Control Room) evaluation complete [latest-23078]2023-03-26T22:31:38.926Z <Rule:INFO> Notification: Home Security - Garage side door just opened (Disarmed Only) (rule-lbmoup28 in Notifications) evaluation complete [latest-23078]2023-03-26T22:31:38.927Z <Rule:INFO> Alarm triggered (rule-lbqu752y in Home Security) trigger evaluation result is true (previously false) [latest-23078]2023-03-26T22:31:38.930Z <Rule:INFO> Alarm triggered (rule-lbqu752y in Home Security) constraints not met! [latest-23078]2023-03-26T22:31:38.930Z <Rule:INFO> Alarm triggered (rule-lbqu752y in Home Security) evaluated; trigger state changed (true), but rule state remains RESET [latest-23078]2023-03-26T22:31:38.931Z <Rule:INFO> Toggle Vestibule scene 003 LED color state between green/blue (rule-lfn441bq in Home Security) trigger evaluation result is true (previously false) [latest-23078]2023-03-26T22:31:38.932Z <Rule:INFO> Toggle Vestibule scene 003 LED color state between green/blue (rule-lfn441bq in Home Security) evaluated; rule state transition from RESET to SET! [latest-23078]2023-03-26T22:31:38.939Z <Rule:INFO> Alarm triggered (rule-lbqu752y in Home Security) evaluation complete [latest-23078]2023-03-26T22:31:38.939Z <Rule:INFO> Toggle Vestibule scene 003 LED color state between green/blue (rule-lfn441bq in Home Security) evaluation complete [latest-23078]2023-03-26T22:31:38.941Z <Engine:INFO> Enqueueing "Door Sensors State<SET>" (rule-lerjv6if:S) [latest-23078]2023-03-26T22:31:38.942Z <Engine:INFO> Enqueueing "Notification: Home Security - Garage side door just opened (Disarmed Only)<SET>" (rule-lbmoup28:S) [latest-23078]2023-03-26T22:31:38.943Z <Engine:INFO> Enqueueing "Toggle Vestibule scene 003 LED color state between green/blue<SET>" (rule-lfn441bq:S) [latest-23078]2023-03-26T22:31:38.945Z <Engine:NOTICE> Starting reaction Door Sensors State<SET> (rule-lerjv6if:S) [latest-23078]2023-03-26T22:31:38.946Z <Engine:NOTICE> Starting reaction Notification: Home Security - Garage side door just opened (Disarmed Only)<SET> (rule-lbmoup28:S) [latest-23078]2023-03-26T22:31:38.948Z <Engine:NOTICE> Starting reaction Toggle Vestibule scene 003 LED color state between green/blue<SET> (rule-lfn441bq:S) [latest-23078]2023-03-26T22:31:38.949Z <ZWaveJSController:INFO> ZWaveJSController#zwavejs performing zwave_device.set_config on Switch#zwavejs>128-0 with [Object]{ "parameter": "9", "size": 1, "value": 1, "bitmask": 0 } [latest-23078]2023-03-26T22:31:38.956Z <HassController:INFO> HassController#hass action x_hass_input_text.set_value([Object]{ "value": "Open" }) on Entity#hass>input_text_h_door_sensors_state succeeded [latest-23078]2023-03-26T22:31:38.957Z <Engine:INFO> Resuming reaction Door Sensors State<SET> (rule-lerjv6if:S) from step 1 [latest-23078]2023-03-26T22:31:38.958Z <Engine:INFO> Door Sensors State<SET> all actions completed. [latest-23078]2023-03-26T22:31:39.284Z <Engine:INFO> Resuming reaction Toggle Vestibule scene 003 LED color state between green/blue<SET> (rule-lfn441bq:S) from step 2 [latest-23078]2023-03-26T22:31:39.284Z <Engine:INFO> Toggle Vestibule scene 003 LED color state between green/blue<SET> all actions completed. [latest-23078]2023-03-26T22:31:39.530Z <HassController:INFO> HassController#hass action x_hass_siren.turn_on([Object]{ "tone": "30" }) on Entity#hass>siren_siren_8 succeeded [latest-23078]2023-03-26T22:31:39.531Z <Engine:INFO> Resuming reaction Notification: Home Security - Garage side door just opened (Disarmed Only)<SET> (rule-lbmoup28:S) from step 2 [latest-23078]2023-03-26T22:31:39.531Z <Engine:INFO> Notification: Home Security - Garage side door just opened (Disarmed Only)<SET> all actions completed. [latest-23078]2023-03-26T22:31:40.341Z <Rule:INFO> Notification: Home Security - Open/close water main shut-off valve (rule-kvo8us5v in Notifications) starting evaluation; because entity-changed BinarySensor#hass>binary_sensor_siren_siren_active_8 [latest-23078]2023-03-26T22:31:40.351Z <Rule:INFO> Notification: Home Security - Open/close water main shut-off valve (rule-kvo8us5v in Notifications) trigger evaluation result is false (previously false) [latest-23078]2023-03-26T22:31:40.352Z <Rule:INFO> Notification: Home Security - Open/close water main shut-off valve (rule-kvo8us5v in Notifications) evaluated; trigger state unchanged (false); rule state remains RESET [latest-23078]2023-03-26T22:31:40.353Z <Rule:INFO> Notification: Home Security - Open/close water main shut-off valve (rule-kvo8us5v in Notifications) evaluation complete [latest-23078]2023-03-26T22:31:40.645Z <Rule:INFO> Notification: Home Security - Open/close water main shut-off valve (rule-kvo8us5v in Notifications) starting evaluation; because entity-changed Group#groups>water_leak_detected [latest-23078]2023-03-26T22:31:40.654Z <Rule:INFO> Notification: Home Security - Open/close water main shut-off valve (rule-kvo8us5v in Notifications) trigger evaluation result is false (previously false) [latest-23078]2023-03-26T22:31:40.654Z <Rule:INFO> Notification: Home Security - Open/close water main shut-off valve (rule-kvo8us5v in Notifications) evaluated; trigger state unchanged (false); rule state remains RESET [latest-23078]2023-03-26T22:31:40.655Z <Rule:INFO> Notification: Home Security - Open/close water main shut-off valve (rule-kvo8us5v in Notifications) evaluation complete [latest-23078]2023-03-26T22:31:41.311Z <Rule:INFO> Any door open? (rule-lfn41thm in Home Security) starting evaluation; because entity-changed BinarySensor#hass>binary_sensor_garage_side_door_openclose_window_door_is_open [latest-23078]2023-03-26T22:31:41.312Z <Rule:INFO> Door Sensors State (rule-lerjv6if in Control Room) starting evaluation; because entity-changed BinarySensor#hass>binary_sensor_garage_side_door_openclose_window_door_is_open [latest-23078]2023-03-26T22:31:41.313Z <Rule:INFO> Notification: Home Security - Garage side door just opened (Disarmed Only) (rule-lbmoup28 in Notifications) starting evaluation; because entity-changed BinarySensor#hass>binary_sensor_garage_side_door_openclose_window_door_is_open [latest-23078]2023-03-26T22:31:41.315Z <Rule:INFO> Any door open? (rule-lfn41thm in Home Security) trigger evaluation result is false (previously true) [latest-23078]2023-03-26T22:31:41.315Z <Rule:INFO> Any door open? (rule-lfn41thm in Home Security) evaluated; rule state transition from SET to RESET! [latest-23078]2023-03-26T22:31:41.327Z <Rule:INFO> Door Sensors State (rule-lerjv6if in Control Room) trigger evaluation result is false (previously true) [latest-23078]2023-03-26T22:31:41.327Z <Rule:INFO> Door Sensors State (rule-lerjv6if in Control Room) evaluated; rule state transition from SET to RESET! [latest-23078]2023-03-26T22:31:41.335Z <Rule:INFO> Notification: Home Security - Garage side door just opened (Disarmed Only) (rule-lbmoup28 in Notifications) trigger evaluation result is false (previously true) [latest-23078]2023-03-26T22:31:41.336Z <Rule:INFO> Notification: Home Security - Garage side door just opened (Disarmed Only) (rule-lbmoup28 in Notifications) evaluated; rule state transition from SET to RESET! [latest-23078]2023-03-26T22:31:41.343Z <Rule:INFO> Alarm triggered (rule-lbqu752y in Home Security) starting evaluation; because data-changed Data#states:cs-rule-lfn41thm [latest-23078]2023-03-26T22:31:41.343Z <Rule:INFO> Toggle Vestibule scene 003 LED color state between green/blue (rule-lfn441bq in Home Security) starting evaluation; because data-changed Data#states:cs-rule-lfn41thm [latest-23078]2023-03-26T22:31:41.344Z <Rule:INFO> Any door open? (rule-lfn41thm in Home Security) evaluation complete [latest-23078]2023-03-26T22:31:41.344Z <Rule:INFO> Door Sensors State (rule-lerjv6if in Control Room) evaluation complete [latest-23078]2023-03-26T22:31:41.344Z <Rule:INFO> Notification: Home Security - Garage side door just opened (Disarmed Only) (rule-lbmoup28 in Notifications) evaluation complete [latest-23078]2023-03-26T22:31:41.345Z <Rule:INFO> Alarm triggered (rule-lbqu752y in Home Security) trigger evaluation result is false (previously true) [latest-23078]2023-03-26T22:31:41.346Z <Rule:INFO> Alarm triggered (rule-lbqu752y in Home Security) evaluated; trigger state changed (false), but rule state remains RESET [latest-23078]2023-03-26T22:31:41.347Z <Rule:INFO> Toggle Vestibule scene 003 LED color state between green/blue (rule-lfn441bq in Home Security) trigger evaluation result is false (previously true) [latest-23078]2023-03-26T22:31:41.348Z <Rule:INFO> Toggle Vestibule scene 003 LED color state between green/blue (rule-lfn441bq in Home Security) evaluated; rule state transition from SET to RESET! [latest-23078]2023-03-26T22:31:41.354Z <Rule:INFO> Alarm triggered (rule-lbqu752y in Home Security) evaluation complete [latest-23078]2023-03-26T22:31:41.355Z <Rule:INFO> Toggle Vestibule scene 003 LED color state between green/blue (rule-lfn441bq in Home Security) evaluation complete [latest-23078]2023-03-26T22:31:41.356Z <Engine:INFO> Enqueueing "Door Sensors State<RESET>" (rule-lerjv6if:R) [latest-23078]2023-03-26T22:31:41.357Z <Engine:INFO> Enqueueing "Notification: Home Security - Garage side door just opened (Disarmed Only)<RESET>" (rule-lbmoup28:R) [latest-23078]2023-03-26T22:31:41.360Z <Engine:INFO> Enqueueing "Toggle Vestibule scene 003 LED color state between green/blue<RESET>" (rule-lfn441bq:R) [latest-23078]2023-03-26T22:31:41.361Z <Engine:NOTICE> Starting reaction Door Sensors State<RESET> (rule-lerjv6if:R) [latest-23078]2023-03-26T22:31:41.363Z <Engine:NOTICE> Starting reaction Notification: Home Security - Garage side door just opened (Disarmed Only)<RESET> (rule-lbmoup28:R) [latest-23078]2023-03-26T22:31:41.365Z <Engine:NOTICE> Starting reaction Toggle Vestibule scene 003 LED color state between green/blue<RESET> (rule-lfn441bq:R) [latest-23078]2023-03-26T22:31:41.366Z <ZWaveJSController:INFO> ZWaveJSController#zwavejs performing zwave_device.set_config on Switch#zwavejs>128-0 with [Object]{ "parameter": "9", "size": 1, "value": 2, "bitmask": 0 } [latest-23078]2023-03-26T22:31:41.374Z <HassController:INFO> HassController#hass action x_hass_input_text.set_value([Object]{ "value": "Closed" }) on Entity#hass>input_text_h_door_sensors_state succeeded [latest-23078]2023-03-26T22:31:41.375Z <Engine:INFO> Resuming reaction Door Sensors State<RESET> (rule-lerjv6if:R) from step 1 [latest-23078]2023-03-26T22:31:41.375Z <Engine:INFO> Door Sensors State<RESET> all actions completed. [latest-23078]2023-03-26T22:31:41.497Z <Rule:INFO> Notification: Update Available - Home Assistant (rule-lbmnmfds in Notifications) starting evaluation; because entity-changed ValueSensor#hass>sensor_docker_hub [latest-23078]2023-03-26T22:31:41.498Z <Rule:INFO> Notification: Update Available - Home Assistant (rule-lbmnmfds in Notifications) trigger evaluation result is false (previously false) [latest-23078]2023-03-26T22:31:41.498Z <Rule:INFO> Notification: Update Available - Home Assistant (rule-lbmnmfds in Notifications) evaluated; trigger state unchanged (false); rule state remains RESET [latest-23078]2023-03-26T22:31:41.499Z <Rule:INFO> Notification: Update Available - Home Assistant (rule-lbmnmfds in Notifications) evaluation complete [latest-23078]2023-03-26T22:31:41.501Z <Rule:INFO> Notification: Update Available - Home Assistant (rule-lbmnmfds in Notifications) starting evaluation; because entity-changed BinarySensor#hass>binary_sensor_docker_hub_update_available [latest-23078]2023-03-26T22:31:41.502Z <Rule:INFO> Notification: Update Available - Home Assistant (rule-lbmnmfds in Notifications) trigger evaluation result is false (previously false) [latest-23078]2023-03-26T22:31:41.502Z <Rule:INFO> Notification: Update Available - Home Assistant (rule-lbmnmfds in Notifications) evaluated; trigger state unchanged (false); rule state remains RESET [latest-23078]2023-03-26T22:31:41.503Z <Rule:INFO> Notification: Update Available - Home Assistant (rule-lbmnmfds in Notifications) evaluation complete [latest-23078]2023-03-26T22:31:41.709Z <Engine:INFO> Resuming reaction Toggle Vestibule scene 003 LED color state between green/blue<RESET> (rule-lfn441bq:R) from step 2 [latest-23078]2023-03-26T22:31:41.709Z <Engine:INFO> Toggle Vestibule scene 003 LED color state between green/blue<RESET> all actions completed. [latest-23078]2023-03-26T22:31:49.669Z <Rule:INFO> Notification: Update Available - Reactor (rule-laeg075n in Notifications) starting evaluation; because entity-changed System#reactor_system>system [latest-23078]2023-03-26T22:31:49.670Z <Rule:INFO> Notification: Update Available - Reactor (rule-laeg075n in Notifications) trigger evaluation result is false (previously false) [latest-23078]2023-03-26T22:31:49.670Z <Rule:INFO> Notification: Update Available - Reactor (rule-laeg075n in Notifications) evaluated; trigger state unchanged (false); rule state remains RESET [latest-23078]2023-03-26T22:31:49.670Z <Rule:INFO> Notification: Update Available - Reactor (rule-laeg075n in Notifications) evaluation complete [latest-23078]2023-03-26T22:31:49.675Z <Rule:INFO> Notification: Update Available - Reactor (rule-laeg075n in Notifications) starting evaluation; because entity-changed System#reactor_system>system [latest-23078]2023-03-26T22:31:49.675Z <Rule:INFO> Notification: Update Available - Reactor (rule-laeg075n in Notifications) trigger evaluation result is false (previously false) [latest-23078]2023-03-26T22:31:49.676Z <Rule:INFO> Notification: Update Available - Reactor (rule-laeg075n in Notifications) evaluated; trigger state unchanged (false); rule state remains RESET [latest-23078]2023-03-26T22:31:49.676Z <Rule:INFO> Notification: Update Available - Reactor (rule-laeg075n in Notifications) evaluation complete [latest-23078]2023-03-26T22:31:49.678Z <Rule:INFO> Notification: Update Available - Reactor (rule-laeg075n in Notifications) starting evaluation; because entity-changed System#reactor_system>system [latest-23078]2023-03-26T22:31:49.679Z <Rule:INFO> Notification: Update Available - Reactor (rule-laeg075n in Notifications) trigger evaluation result is false (previously false) [latest-23078]2023-03-26T22:31:49.679Z <Rule:INFO> Notification: Update Available - Reactor (rule-laeg075n in Notifications) evaluated; trigger state unchanged (false); rule state remains RESET [latest-23078]2023-03-26T22:31:49.680Z <Rule:INFO> Notification: Update Available - Reactor (rule-laeg075n in Notifications) evaluation complete [latest-23078]2023-03-26T22:31:49.682Z <Rule:INFO> Notification: Update Available - Reactor (rule-laeg075n in Notifications) starting evaluation; because entity-changed System#reactor_system>system [latest-23078]2023-03-26T22:31:49.683Z <Rule:INFO> Notification: Update Available - Reactor (rule-laeg075n in Notifications) trigger evaluation result is false (previously false) [latest-23078]2023-03-26T22:31:49.683Z <Rule:INFO> Notification: Update Available - Reactor (rule-laeg075n in Notifications) evaluated; trigger state unchanged (false); rule state remains RESET [latest-23078]2023-03-26T22:31:49.683Z <Rule:INFO> Notification: Update Available - Reactor (rule-laeg075n in Notifications) evaluation complete [latest-23078]2023-03-26T22:31:52.484Z <Rule:INFO> Notification: Home Security - Open/close water main shut-off valve (rule-kvo8us5v in Notifications) starting evaluation; because entity-changed BinarySensor#hass>binary_sensor_siren_siren_active_8 [latest-23078]2023-03-26T22:31:52.485Z <Rule:INFO> Any door open? (rule-lfn41thm in Home Security) starting evaluation; because entity-changed BinarySensor#hass>binary_sensor_garage_side_door_openclose_window_door_is_open [latest-23078]2023-03-26T22:31:52.485Z <Rule:INFO> Door Sensors State (rule-lerjv6if in Control Room) starting evaluation; because entity-changed BinarySensor#hass>binary_sensor_garage_side_door_openclose_window_door_is_open [latest-23078]2023-03-26T22:31:52.486Z <Rule:INFO> Notification: Home Security - Garage side door just opened (Disarmed Only) (rule-lbmoup28 in Notifications) starting evaluation; because entity-changed BinarySensor#hass>binary_sensor_garage_side_door_openclose_window_door_is_open [latest-23078]2023-03-26T22:31:52.502Z <Rule:INFO> Notification: Home Security - Open/close water main shut-off valve (rule-kvo8us5v in Notifications) trigger evaluation result is false (previously false) [latest-23078]2023-03-26T22:31:52.502Z <Rule:INFO> Notification: Home Security - Open/close water main shut-off valve (rule-kvo8us5v in Notifications) evaluated; trigger state unchanged (false); rule state remains RESET [latest-23078]2023-03-26T22:31:52.505Z <Rule:INFO> Any door open? (rule-lfn41thm in Home Security) trigger evaluation result is true (previously false) [latest-23078]2023-03-26T22:31:52.505Z <Rule:INFO> Any door open? (rule-lfn41thm in Home Security) evaluated; rule state transition from RESET to SET! [latest-23078]2023-03-26T22:31:52.515Z <Rule:INFO> Door Sensors State (rule-lerjv6if in Control Room) trigger evaluation result is true (previously false) [latest-23078]2023-03-26T22:31:52.515Z <Rule:INFO> Door Sensors State (rule-lerjv6if in Control Room) evaluated; rule state transition from RESET to SET! [latest-23078]2023-03-26T22:31:52.524Z <Rule:INFO> Notification: Home Security - Garage side door just opened (Disarmed Only) (rule-lbmoup28 in Notifications) trigger evaluation result is true (previously false) [latest-23078]2023-03-26T22:31:52.525Z <Rule:INFO> Notification: Home Security - Garage side door just opened (Disarmed Only) (rule-lbmoup28 in Notifications) evaluated; rule state transition from RESET to SET! [latest-23078]2023-03-26T22:31:52.537Z <Rule:INFO> Notification: Home Security - Open/close water main shut-off valve (rule-kvo8us5v in Notifications) evaluation complete [latest-23078]2023-03-26T22:31:52.538Z <Rule:INFO> Alarm triggered (rule-lbqu752y in Home Security) starting evaluation; because data-changed Data#states:cs-rule-lfn41thm [latest-23078]2023-03-26T22:31:52.538Z <Rule:INFO> Toggle Vestibule scene 003 LED color state between green/blue (rule-lfn441bq in Home Security) starting evaluation; because data-changed Data#states:cs-rule-lfn41thm [latest-23078]2023-03-26T22:31:52.538Z <Rule:INFO> Any door open? (rule-lfn41thm in Home Security) evaluation complete [latest-23078]2023-03-26T22:31:52.538Z <Rule:INFO> Door Sensors State (rule-lerjv6if in Control Room) evaluation complete [latest-23078]2023-03-26T22:31:52.539Z <Rule:INFO> Notification: Home Security - Garage side door just opened (Disarmed Only) (rule-lbmoup28 in Notifications) evaluation complete [latest-23078]2023-03-26T22:31:52.540Z <HassController:INFO> HassController#hass action x_hass_siren.turn_off([Object]{ }) on Entity#hass>siren_siren_8 succeeded [latest-23078]2023-03-26T22:31:52.541Z <Rule:INFO> Alarm triggered (rule-lbqu752y in Home Security) trigger evaluation result is true (previously false) [latest-23078]2023-03-26T22:31:52.542Z <Rule:INFO> Alarm triggered (rule-lbqu752y in Home Security) constraints not met! [latest-23078]2023-03-26T22:31:52.542Z <Rule:INFO> Alarm triggered (rule-lbqu752y in Home Security) evaluated; trigger state changed (true), but rule state remains RESET [latest-23078]2023-03-26T22:31:52.544Z <Rule:INFO> Toggle Vestibule scene 003 LED color state between green/blue (rule-lfn441bq in Home Security) trigger evaluation result is true (previously false) [latest-23078]2023-03-26T22:31:52.544Z <Rule:INFO> Toggle Vestibule scene 003 LED color state between green/blue (rule-lfn441bq in Home Security) evaluated; rule state transition from RESET to SET! [latest-23078]2023-03-26T22:31:52.551Z <Rule:INFO> Alarm triggered (rule-lbqu752y in Home Security) evaluation complete [latest-23078]2023-03-26T22:31:52.552Z <Rule:INFO> Toggle Vestibule scene 003 LED color state between green/blue (rule-lfn441bq in Home Security) evaluation complete [latest-23078]2023-03-26T22:31:52.565Z <Engine:NOTICE> [Engine]Engine#1 entry 171 reaction rule-lbmoup28:R: [Error] terminated [-] [latest-23078]2023-03-26T22:31:52.565Z <Engine:CRIT> Error: terminated [-] Error: terminated at Engine._process_reaction_queue (/opt/reactor/server/lib/Engine.js:1555:47) at runMicrotasks (<anonymous>) at processTicksAndRejections (node:internal/process/task_queues:96:5) -
Some background
I have MQTTController based entities that I want to use in time calculations in my rules. These entities represent two separate time ranges, one for the weekdays and the other for the weekends. In this particular example they are used to control my doorbell activity (whether it's enabled or disabled).
MQTT message which is used to update the entities. NOTE: time is in 24h format
{ "data": { "weekdays": { "enable": "09:28", "disable": "20:00" }, "weekends": { "enable": "09:00", "disable": "21:00" } } }Entity definitions (here's only the definition for the weekdays for brevity)
doorbell-weekdays-enable: name: 'Ovikello päälle (arkisin)' topic: 'doorbell/settings' capabilities: - string_sensor primary_attribute: string_sensor.value events: "%topic%": "string_sensor.value": json_payload: true expr: "payload.data.weekdays.enable" doorbell-weekdays-disable: name: 'Ovikello pois päältä (arkisin)' topic: 'doorbell/settings' capabilities: - string_sensor primary_attribute: string_sensor.value events: "%topic%": "string_sensor.value": json_payload: true expr: "payload.data.weekdays.disable"I have verified that the entities are populated correctly and the values are working in local expressions.
The entity (only the range start for brevity):
Screenshot from 2023-03-22 09-27-54.pngThe rule:
Screenshot from 2023-03-22 09-28-28.pngAnd the local expression within the rule:
weekdays_enabled = (time() >= time(getEntity( "mqtt>doorbell-weekdays-enable" ).attributes.string_sensor.value )) && (time() <= time(getEntity( "mqtt>doorbell-weekdays-disable" ).attributes.string_sensor.value ))The problem
Local expression doesn't seem to evaluate to true even if the current time gets within the range. But if the related entities are updated, then the expression is evaluated and the rule is triggered.As seen from the screenshots, the current time is 09:28:12 and the start time in corresponding entity is set to 09:28. But still the rule is not triggered. However, if I update the entity e.g. to 09:27, the local expression will get evaluated and the rule is triggered.
My understanding is that the local expression is working correctly but since it's not evaluated, it will not trigger the rule.
Is this a bug or have I misunderstood something? If so, how should I implement this kind of functionality?
br,
mgvraReactor (Multi-hub) latest-23078-d592d400 + MQTTController [0.1.23010]
-
Converting from Vera Plus to Hubitat at two different locations. The two sites are interconnected via a router-to-router VPN. I currently have a Hubitat C7 running at Site One and a Vera Plus at Site Two. The MSR Raspberry Pi is co-located with the Vera Plus at Site Two. I "activated" a Hubitat C8 (ethernet connected) at Site Two including the installation of Hub Information Driver and its associated device. I also installed a single zwave outlet module (GE ZW4202). I restarted MSR. The C8 and its associated devices appear on both the Entities page and the MSR Dashboard, but the C8 reports as down on the MSR Status page and the GE outlet does not respond when "clicked". I am not sure where to look to try to find the source of the problem and will greatly appreciate any suggestions.
-
I have a use case where I need to have a boolean variable that will be set to true/false by reactions.
I see that i can define a local variable by giving it a name and leaving the definition empty. This leaves it at state "null" until a reaction tells it that its a boolean.
Is there a way to tell it that it should start out as "false" (i.e when reactor has restarted), and not null?
Am i going about this the wrong way?
-- The use case is that I have a sensor on my fireplace, and the following logic is for notifying when its time to get up en refill with firewood.. I also want to reset the MaxInInterval to CurrentTemp when notification is sent..
1fd2951f-cb6b-4a2f-b957-1e0698171f4d-image.png dd99634e-f0ad-4878-bb87-0284c2df5535-image.png
Edit: better screenhots. Reactor version 23010-7dd2c9e9
-
Build 21228 has been released. Docker images available from DockerHub as usual, and bare-metal packages here.
Home Assistant up to version 2021.8.6 supported; the online version of the manual will now state the current supported versions; Fix an error in OWMWeatherController that could cause it to stop updating; Unify the approach to entity filtering on all hub interface classes (controllers); this works for device entities only; it may be extended to other entities later; Improve error detail in messages for EzloController during auth phase; Add isRuleSet() and isRuleEnabled() functions to expressions extensions; Implement set action for lock and passage capabilities (makes them more easily scriptable in some cases); Fix a place in the UI where 24-hour time was not being displayed. -
Hi guys,
I want to import my reactor sensors in the MSR addon for Home Assistant, but I can't find the app.js file anywhere. So now I don't know where to put the backup file.
I have not tried to put it in the main directory (config/reactor) yet. Wanted to know if I'm the only one with the problem.
Reactor addon: v0.0.8
MSR: 23063-c464b685
Home Assistant 2023.3.3
Supervisor 2023.03.1
Operating System 9.5
Frontend 20230202.0 - latestI started with v0.0.7, have just updated everything. Still no file.
-
I'm a little bit confused how to configure extended capabilities for the entities in the MQTTController.
mqtt_cababilities.yaml states that: "...You can add your own capabilities by adding a "capabilities" section to your own local_mqtt_capabilities.yaml file in your config directory."
So I did this in my local_mqtt_capabilities.yaml in the config directory:
version: 22353 revision: 1 format: 1 capabilities: x_my_config: attributes: partyMode: type: bool actions: some_action: topic: '%topic/write' payload: "some value"And in my reactor.yaml I have following configuration entry:
my-config: name: 'My custom configuration' topic: 'my-config' query: "%topic%/read" init: "%topic%/read" capabilities: - x_my_config primary_attribute: x_my_config.partyMode events: "%topic%/status": "x_my_config.partyMode": json_payload: true expr: "payload.partyMode"This sort of works but not quite. The partyMode attribute gets updated when messages arrive for that specific topic, so that's fine. But I don't see x_my_config capability in the Capabilities list in the UI and also the some_action is missing.
Screenshot from 2023-03-09 19-42-49.png
Addition to that the primary value is not set and I'm getting the following error:
Screenshot from 2023-03-09 19-30-42.pngHave I completely misunderstood the idea behind the capability extension and the attributes? If so, could someone point me to the right direction with few explanatory example configs.
What I'm trying to achieve is a set of configuration options that could be updated thru the MQTT, and also provide some actions that the rules could invoke.
Reactor (Multi-hub) latest-23063-c464b685 + MQTTController [0.1.23010]
br,
mgvra -
Using the following localization settings in reactor.yaml:
units: metric locale: fi-FI time_format: "%H:%M:%S" date_format: "%d/%m/%Y"But still I'm getting US date & time formatting, so settings do not seem to override defaults? Using 23049 on Synology Docker
-
Installing MQTTController on Home Assistant Core when Reactor is installed as an Add-In (VirtualBox)
Running Home Assistant Core under VirtualBox (on Windows) and Reactor is installed and working fine as an add-in. What I can't figure out is how to install MQTTController in this situation. I can upload the files and unzip them, but I can't run install.sh in a terminal window because npm is not a part of the Core installation.
It does appear that somewhere in the stack there is a version of docker there between VirtualBox and HA, (I see some references go by in the VirtualBox startup log) but it appears minimal and will not execute the install via the docker technique in your documentation from the VB console.
Is there a way to do this?
Thanks.
-
I've done a bit of repackaging of MSR to make it work as an add-on under Home Assistant mostly for my own purposes but hopefully it makes it a bit easier to install and get going.
GitHub - mrw298/hassio-reactor-addon
GitHub - mrw298/hassio-reactor-addon
Contribute to mrw298/hassio-reactor-addon development by creating an account on GitHub.
-
@toggledbits somewhere I thought I read that MSR goes thru the items in set reaction and reset reaction in stack order, ie from top to bottom/first to last.
Am I mistaken?
-
Reactor 23063 running on Windows Bare Metal.
Home assistant 2023.3.1
ESPHome 2023.2.4I've been trying a few ways using some results from search to call a Hass service as a reaction in a Reactor rule.
Specifically, when the PIR in the room senses motion, wake the NsPanel screen.
My Reactions otherwise so far are basic If this then that so I'm way behind what others are doing.
What I want to call as a Reaction:
Capture1.PNGWhat I've tried (a few variations on):
Capture2.PNGWhat happens:
[latest-23063]2023-03-07T07:45:21.688Z <wsapi:ERR> wsapi: error thrown handling client message [Object]{ "command": "perform", "entity": "WOKHASS1>system", "action": "x_hass_system.call_service", "parameters": { "service": "ESPHome: nspensuite_send_command_printf", "data": "page home" }, "qid": 75 } [latest-23063]2023-03-07T07:45:21.688Z <wsapi:CRIT> TypeError: Cannot read properties of null (reading '1') [-] TypeError: Cannot read properties of null (reading '1') at HassController.performOnEntity (C:\reactor\reactor\server\lib\HassController.js:584:108) at System.perform (C:\reactor\reactor\server\lib\Entity.js:707:56) at WSAPI.clientMessage (C:\reactor\reactor\server\wsapi\wsapi.js:499:48) at WebSocket.<anonymous> (C:\reactor\reactor\server\wsapi\wsapi.js:290:158) at WebSocket.emit (node:events:520:28) at WebSocket.emit (node:domain:475:12) at Receiver.receiverOnMessage (C:\reactor\reactor\node_modules\ws\lib\websocket.js:1059:20) at Receiver.emit (node:events:520:28) at Receiver.emit (node:domain:475:12) at Receiver.dataMessage (C:\reactor\reactor\node_modules\ws\lib\receiver.js:517:14)If someone can convert the 'call service' to a 'reaction' for me, or share their own similar thing I think that's what I need to achieve this goal.
I suspect if I'm even close to being on the right track, my problems are probably formatting like curly braces etc and lack thereof.
Thanks in advance.
-
@toggledbits was looking thru rule sets and updating which (new) lights I wanted REMII to impact and saw that this...
4711b0df-5e98-4992-bb25-d0e53203f0e8-image.png
...is showing as (missing) in the rule Deactivatedand looking in the dropdown of Variables it appears I cannot select that local expression (only Global) as I did when originally building this out back in 2021.
27f7025c-057e-441a-88ea-dc4bdf39614d-image.png
In looking at the rule Active Period I'm seeing:
487074ef-3bfa-4a84-b03d-ed6d920c118c-image.png which appears to be pointing to setting a variable in a rule?It's admittedly been a couple years since this was built and it's def not fresh in my memory.
-
New installation of Reactor version 23063-c464b685 on a Raspberry PI4 with Portainer/Docker.
Report :
No drop-down list on Entity Attribute in "Creation Rule Sets" interface
I can however visualize the entities.
I have configured HomeAssistant and all entities are coming up fine.
I have an unsupported Hass version 2023.3.0b5.
I'm new to Docker and can someone guide me to a solution?
Christian FABREAlert:
[latest-23063]2023-03-05T09:51:49.575Z <app:null> Process ID 1 user/group 0/0; docker; platform linux/arm64 #1595 SMP PREEMPT Wed Oct 26 11:07:24 BST 2022; locale (undefined) [latest-23063]2023-03-05T09:51:49.576Z <app:null> Basedir /opt/reactor; data in /var/reactor/storage [latest-23063]2023-03-05T09:51:49.577Z <app:null> NODE_PATH=/opt/reactor:/opt/reactor/node_modules [latest-23063]2023-03-05T09:51:49.584Z <app:INFO> Configured locale (undefined); selected locale(s) en-US.UTF-8 [latest-23063]2023-03-05T09:51:49.708Z <app:INFO> Loaded locale en-US for en-US [latest-23063]2023-03-05T09:51:49.725Z <Structure:null> Module Structure v22323 [latest-23063]2023-03-05T09:51:49.729Z <Capabilities:null> Module Capabilities v22356 [latest-23063]2023-03-05T09:51:49.806Z <Capabilities:NOTICE> System capabilities loaded from core distribution, data version 23058 revision 1 [latest-23063]2023-03-05T09:51:49.849Z <Plugin:null> Module Plugin v22300 [latest-23063]2023-03-05T09:51:49.869Z <TimerBroker:null> Module TimerBroker v22283 [latest-23063]2023-03-05T09:51:49.878Z <Entity:null> Module Entity v22353 [latest-23063]2023-03-05T09:51:49.889Z <Controller:null> Module Controller v23044 [latest-23063]2023-03-05T09:51:49.926Z <default:null> Module Ruleset v22293 [latest-23063]2023-03-05T09:51:49.928Z <default:null> Module Rulesets v22146 [latest-23063]2023-03-05T09:51:49.943Z <GlobalExpression:null> Module GlobalExpression v22146 [latest-23063]2023-03-05T09:51:49.977Z <Predicate:null> Module Predicate v22345 [latest-23063]2023-03-05T09:51:49.987Z <AlertManager:null> Module AlertManager v22283 [latest-23063]2023-03-05T09:51:49.995Z <Rule:null> Module Rule v22345 [latest-23063]2023-03-05T09:51:50.004Z <GlobalReaction:null> Module GlobalReaction v22324 [latest-23063]2023-03-05T09:51:50.008Z <Engine:null> Module Engine v23001 [latest-23063]2023-03-05T09:51:50.019Z <httpapi:null> Module httpapi v23058 [latest-23063]2023-03-05T09:51:50.078Z <wsapi:null> Module wsapi v23053 [latest-23063]2023-03-05T09:51:50.080Z <app:NOTICE> Starting Structure... [latest-23063]2023-03-05T09:51:50.100Z <Structure:NOTICE> Structure#1 plugin ID influx disabled; skipping [latest-23063]2023-03-05T09:51:50.106Z <Structure:INFO> Structure#1 loading controller interface hass (HassController) [latest-23063]2023-03-05T09:51:50.210Z <HassController:null> Module HassController v23060 [latest-23063]2023-03-05T09:51:50.639Z <Structure:INFO> Structure#1 loading controller interface groups (DynamicGroupController) [latest-23063]2023-03-05T09:51:50.649Z <DynamicGroupController:null> Module DynamicGroupController v22313 [latest-23063]2023-03-05T09:51:50.659Z <Structure:INFO> Structure#1 loading controller interface reactor_system (SystemController) [latest-23063]2023-03-05T09:51:50.672Z <SystemController:null> Module SystemController v22306 [latest-23063]2023-03-05T09:51:50.680Z <Structure:INFO> Starting controller HassController#hass [latest-23063]2023-03-05T09:51:50.682Z <HassController:NOTICE> HassController#hass starting... [latest-23063]2023-03-05T09:51:50.691Z <Controller:INFO> HassController#hass loaded hass capabilities ver 22312 rev 2 format 1 [latest-23063]2023-03-05T09:51:50.715Z <Controller:INFO> HassController#hass loaded implementation data ver 23058 rev 1 format 1 [latest-23063]2023-03-05T09:51:50.715Z <Structure:INFO> Starting controller DynamicGroupController#groups [latest-23063]2023-03-05T09:51:50.728Z <Controller:NOTICE> Controller DynamicGroupController#groups is now online. [latest-23063]2023-03-05T09:51:50.728Z <Structure:INFO> Starting controller SystemController#reactor_system [latest-23063]2023-03-05T09:51:50.733Z <Controller:NOTICE> Controller SystemController#reactor_system is now online. [latest-23063]2023-03-05T09:51:50.877Z <HassController:INFO> HassController#hass device mapping data loaded; checking... [latest-23063]2023-03-05T09:51:50.881Z <HassController:WARN> HassController: implementation of capability input_select.selector does not provide attribute values [latest-23063]2023-03-05T09:51:50.884Z <HassController:NOTICE> HassController#hass connecting to ws://192.168.1.31:8123/api/websocket [latest-23063]2023-03-05T09:51:50.894Z <app:NOTICE> Starting HTTP server and API... [latest-23063]2023-03-05T09:51:50.901Z <httpapi:NOTICE> httpapi: starting HTTP service on port "8111" [latest-23063]2023-03-05T09:51:50.909Z <app:NOTICE> Starting Reaction Engine... [latest-23063]2023-03-05T09:51:50.910Z <Engine:INFO> Reaction Engine starting [latest-23063]2023-03-05T09:51:50.911Z <Engine:INFO> Checking rule sets... [latest-23063]2023-03-05T09:51:50.916Z <Engine:INFO> Checking rules... [latest-23063]2023-03-05T09:51:50.923Z <Engine:INFO> Data check complete; no corrections. [latest-23063]2023-03-05T09:51:50.938Z <Rule:NOTICE> rule-leu8xfe4 (rule-leu8xfe4 in First Rule Set) starting [latest-23063]2023-03-05T09:51:50.939Z <Engine:NOTICE> Reaction Engine running! [latest-23063]2023-03-05T09:51:50.939Z <Rule:NOTICE> rule-leu8xfe4 (rule-leu8xfe4 in First Rule Set) can't start -- rule is disabled [latest-23063]2023-03-05T09:51:50.952Z <httpapi:NOTICE> httpapi: listening [latest-23063]2023-03-05T09:51:50.981Z <app:NOTICE> Starting WSAPI... [latest-23063]2023-03-05T09:51:50.983Z <wsapi:NOTICE> wsapi: starting version 23053 [latest-23063]2023-03-05T09:51:51.080Z <Engine:INFO> [Engine]Engine#1 master timer tick, local time "3/5/2023 10:51:51 AM" (TZ offset 60 mins from UTC) [latest-23063]2023-03-05T09:51:51.119Z <HassController:NOTICE> HassController#hass connected, starting protocol [latest-23063]2023-03-05T09:51:51.127Z <httpapi:INFO> httpapi: API request from ::ffff:192.168.1.42: GET /api/v1/systime [latest-23063]2023-03-05T09:51:51.145Z <HassController:INFO> HassController#hass successful authentication with ws://192.168.1.31:8123; fetching initial data... [latest-23063]2023-03-05T09:51:51.155Z <HassController:INFO> HassController#hass Hass reports version "2023.3.0b5" location Maison timezone Europe/Paris state RUNNING safe_mode false [latest-23063]2023-03-05T09:51:51.245Z <HassController:NOTICE> HassController#hass no signature match for update.home_assistant_supervisor_update [latest-23063]2023-03-05T09:51:51.248Z <HassController:NOTICE> HassController#hass no signature match for update.home_assistant_core_update [latest-23063]2023-03-05T09:51:51.249Z <HassController:NOTICE> HassController#hass no signature match for update.terminal_ssh_update [latest-23063]2023-03-05T09:51:51.250Z <HassController:NOTICE> HassController#hass no signature match for update.file_editor_update [latest-23063]2023-03-05T09:51:51.251Z <HassController:NOTICE> HassController#hass no signature match for update.samba_backup_update [latest-23063]2023-03-05T09:51:51.252Z <HassController:NOTICE> HassController#hass no signature match for update.home_assistant_operating_system_update [latest-23063]2023-03-05T09:51:51.253Z <HassController:NOTICE> HassController#hass no signature match for sun.sun [latest-23063]2023-03-05T09:51:51.285Z <HassController:NOTICE> HassController#hass no signature match for calendar.calendrier [latest-23063]2023-03-05T09:51:51.413Z <HassController:NOTICE> HassController#hass no signature match for siren.piscine_siren [latest-23063]2023-03-05T09:51:51.419Z <HassController:NOTICE> HassController#hass no signature match for camera.portillon [latest-23063]2023-03-05T09:51:51.607Z <Controller:INFO> HassController#hass 0 dead entities older than 86400000s purged [latest-23063]2023-03-05T09:51:51.633Z <Controller:NOTICE> Controller HassController#hass is now online. [latest-23063]2023-03-05T09:51:51.634Z <DynamicGroupController:INFO> All controllers ready, setting up dynamic groups [latest-23063]2023-03-05T09:51:51.726Z <wsapi:INFO> wsapi: connection from ::ffff:192.168.1.42 [latest-23063]2023-03-05T09:51:55.510Z <wsapi:INFO> client "192.168.1.42#1" closed, code=1001, reason= [latest-23063]2023-03-05T09:51:55.815Z <httpapi:INFO> httpapi: API request from ::ffff:192.168.1.42: GET /api/v1/lang [latest-23063]2023-03-05T09:51:55.843Z <wsapi:INFO> wsapi: connection from ::ffff:192.168.1.42 [latest-23063]2023-03-05T09:51:56.849Z <httpapi:INFO> httpapi: API request from ::ffff:192.168.1.42: GET /api/v1/systime [latest-23063]2023-03-05T09:52:07.392Z <httpapi:INFO> httpapi: API request from ::ffff:192.168.1.42: GET /api/v1/systime---
reactor_20230305_01.png Rule :
reactor_20230305_02.png Entities:
reactor_20230305_03.png log Reactor :Log Portainer:
NODE_PATH /opt/reactor:/opt/reactor/node_modules [latest-23063]2023-03-05T08:55:17.734Z <app:null> Reactor build latest-23063-c464b685 starting on v16.15.1 [latest-23063]2023-03-05T08:55:17.736Z <app:null> Process ID 1 user/group 0/0; docker; platform linux/arm64 #1595 SMP PREEMPT Wed Oct 26 11:07:24 BST 2022; locale (undefined) [latest-23063]2023-03-05T08:55:17.737Z <app:null> Basedir /opt/reactor; data in /var/reactor/storage [latest-23063]2023-03-05T08:55:17.738Z <app:null> NODE_PATH=/opt/reactor:/opt/reactor/node_modules [latest-23063]2023-03-05T08:55:17.875Z <Structure:null> Module Structure v22323 [latest-23063]2023-03-05T08:55:17.879Z <Capabilities:null> Module Capabilities v22356 [latest-23063]2023-03-05T08:55:18.004Z <Plugin:null> Module Plugin v22300 [latest-23063]2023-03-05T08:55:18.023Z <TimerBroker:null> Module TimerBroker v22283 [latest-23063]2023-03-05T08:55:18.032Z <Entity:null> Module Entity v22353 [latest-23063]2023-03-05T08:55:18.042Z <Controller:null> Module Controller v23044 [latest-23063]2023-03-05T08:55:18.079Z <default:null> Module Ruleset v22293 [latest-23063]2023-03-05T08:55:18.080Z <default:null> Module Rulesets v22146 [latest-23063]2023-03-05T08:55:18.096Z <GlobalExpression:null> Module GlobalExpression v22146 [latest-23063]2023-03-05T08:55:18.129Z <Predicate:null> Module Predicate v22345 [latest-23063]2023-03-05T08:55:18.139Z <AlertManager:null> Module AlertManager v22283 [latest-23063]2023-03-05T08:55:18.146Z <Rule:null> Module Rule v22345 [latest-23063]2023-03-05T08:55:18.156Z <GlobalReaction:null> Module GlobalReaction v22324 [latest-23063]2023-03-05T08:55:18.159Z <Engine:null> Module Engine v23001 [latest-23063]2023-03-05T08:55:18.171Z <httpapi:null> Module httpapi v23058 [latest-23063]2023-03-05T08:55:18.232Z <wsapi:null> Module wsapi v23053 [latest-23063]2023-03-05T08:55:18.358Z <HassController:null> Module HassController v23060 [latest-23063]2023-03-05T08:55:18.780Z <DynamicGroupController:null> Module DynamicGroupController v22313 [latest-23063]2023-03-05T08:55:18.803Z <SystemController:null> Module SystemController v22306``` -
Sorry for another dumb question. Migrating from Vera Alexa to HASS Vera TTS. MSR is on bare metal, Debian Bullseye version 23049
I can get TTS from MSR and basic TTS from MSR which is great!
Trying to get some of the variables I used to use though is stumping me.
In the original MSR, I'd use:
It is now ${{OutingDays}} days until we go to ${{OutingName}}. , Sleep well!for example, and that worked fine (I've not bothered to list the variables as I know the worked)
If I use
{ "message":"It is now${{OutingDays}} days until we go to ${{OutingName}}. , Sleep well!", "data":{"type":"announce", "method":"speak"}, "target":["media_player.everywhere"] }In the data field of the hass service system call it doesn't evaluate the variables (Not really surprised)
So might someone take mercy on me and give me a clue?
TIA
C
-
I'm back from a vacation and it was the first winter one with MSR.
I have a special vacation mode that's auto-setting after the house is in away mode for at least 18 hours - and that's mostly OK. In this mode, lights are turned on/off automatically, some things are off to preverse powers, etc. Thermostats are automatically set at 17C unless there's solar power. That's mostly OK, except when you have to deal with winters and clouds on the day back home.
Long story short: back from vacation, we found the house at 17C - wife wasn't impressed.
Back in the luup days I had a special override, that I forgot to port to MSR, that was basically like this in MSR (coded on the fly):
32298706-86f7-451e-9700-2baf5d5a23b6-image.png
So, I could tell my system when I'm on vacation and have a last day flag to re-set the house to normal behavior before I'm back. It was just two strings variable in a virtual binary sensor.
I don't want to code this in global expressions, so I'm wondering if it's possible to accomplish this with a Virtual Device, but I'm failing to visualize the correct answer and I'm here for inspiration for what others are doing to tackle this.
I don't want to create 4 separate devices (start date, end date, status, last day) in order to keep it easy and I want to be able to change the start/end date from the UI, to simplify things. Any hint is appreciated 🙂
-
I updated to the latest version of Reactor this morning. I run reactor (successfully) on a Raspberry PI 4 4GB with SSD 64GB. I also run Home Assistant in Docker. After updating I noticed a disk space critical error warning!
9f4e1ea1-977a-481b-9806-d3d43a4eff04-image.png
I have tried purging the docker install (docker image prune -a)
I have rebooted the Raspberry PI also, and the error messages keep coming.
I have the following disk space:
58742ed7-e10d-4572-b380-0abda64f90b4-image.png
How do I free up space?
Any help would be appreciated.
-
Good morning,
I'm trying to recreate some notifications I received on my old Vera system based upon House mode. I migrated from Vera to Home Assistant about 6 months ago, and all the automation I have set up are working great, however, I'm noticing that there were things that were once simple in Vera that are more involved in Home Assistant.In House Modes in Vera, there was a screen where I could select all the devices I wanted to be armed in various house modes. I recreated those house modes in Home Assistant very early on, but what I'm not getting now is notifications for various sensors. For instance, if the system is in Away mode, and interior motion is detected, I would get a Vera push notification on my phone. I've been setting these up one by one using haas>system --> x_haas_system.call_service, then setting the notify device and the message, one by one, but it's repetitious and tedious. For a few devices, like motion sensors on my ground floor, it's not a big deal, but now I'm looking at all the windows in my home, which have sensors on them.
So, enough of the background thesis. Simply put, is there a way to have a group of devices ( like 16 different window sensors ) as an entity, and when they are tripped, send out a notification and state which of those sensors was tripped, all in a single rule?
If I have to copy and edit 16 different rules, I'll do that, but I'd prefer a more elegant way where there is one rule to send out the notifications that tells me what was opened.
Thanks for all your advice/help in advance.
I'm running MSR latest-23049-1fd87c91 and Home Assistant 2023.2.5, Supervisor 2023.01.1, Operating System 9.5,
BTW, @toggledbits, I noticed on the About screen for MSR it still shows copyright from 2022. I know you've released versions this year.
Reactor (Multi-hub) latest-23049-1fd87c91 © 2020-2022 Kedron Holdings LLC, All Rights Reserved; Patrick Rigney (toggledbits), Principal Engineer.
-
I'd like the "None deferred" Reset Reaction group to have multiple Conditions. Is this not possible?
Running latest version of MSR, 23049-1fd87c91
-
I have upgraded my Hubitat Hub Information Driver to v3 and after the latest MSR update latest-23028 MSR is working ok. The problem is when MSR probes the device it appears to affect the polling in the new Hub Information Device and its data does not update the data fields in Hubitat. If I remove the Hub Information Device from Maker API so MSR can't see it, The Hub information driver updates the data as expected in Hubitat. I added the device back into Maker API the same problem returns in Hubitat. I have tried to have MSR probe a different device by adding a different probe device and probe action in the reactor.yaml per the documentation but it appears then it still uses the Hub Information Device as the probe device instead of the one specified in the reactor.yaml. See Logs below. Is this the intended behavior to always use the Hub Information Driver if found and not use the device in the reactor.yaml file? Any recommendations on how to get MSR and the v3 of the driver to work correctly or can you see what I am doing wrong?
[latest-23028]2023-02-11T23:27:50.471Z <Controller:NOTICE> Controller HassController#hass is now online. [latest-23028]2023-02-11T23:27:50.471Z <Rule:INFO> Internet Check (rule-l44qss4f in Home) starting evaluation; because entity-changed System#reactor_system>system [latest-23028]2023-02-11T23:27:50.471Z <Rule:INFO> MSR Update Version Available (rule-labweim2 in Notify) starting evaluation; because entity-changed System#reactor_system>system [latest-23028]2023-02-11T23:27:50.472Z <Rule:INFO> Internet Check (rule-l44qss4f in Home) trigger evaluation result is false (previously false) [latest-23028]2023-02-11T23:27:50.472Z <Rule:INFO> Internet Check (rule-l44qss4f in Home) evaluated; trigger state unchanged (false); rule state remains RESET [latest-23028]2023-02-11T23:27:50.472Z <Rule:INFO> MSR Update Version Available (rule-labweim2 in Notify) trigger evaluation result is false (previously false) [latest-23028]2023-02-11T23:27:50.472Z <Rule:INFO> MSR Update Version Available (rule-labweim2 in Notify) evaluated; trigger state unchanged (false); rule state remains RESET [latest-23028]2023-02-11T23:27:50.472Z <Rule:INFO> Internet Check (rule-l44qss4f in Home) evaluation complete [latest-23028]2023-02-11T23:27:50.472Z <Rule:INFO> MSR Update Version Available (rule-labweim2 in Notify) evaluation complete [latest-23028]2023-02-11T23:27:50.673Z <HubitatController:INFO> HubitatController#hubitat Maker API responded with 91 devices [latest-23028]2023-02-11T23:27:50.766Z <HubitatController:INFO> HubitatController#hubitat found 'Hub Information Driver v3' device #"481"; using for probe/health checks. [latest-23028]2023-02-11T23:27:50.780Z <Controller:INFO> HubitatController#hubitat 0 dead entities older than 86400000s purged [latest-23028]2023-02-11T23:27:50.780Z <Rule:INFO> Roku Pause (rule-l3nlrzu9 in Home) starting evaluation; because entity-changed BinarySensor#hubitat>519 [latest-23028]2023-02-11T23:27:50.780Z <Rule:INFO> Stairs Light Low Light (rule-kulslls9 in Living Room) starting evaluation; because entity-changed BinarySensor#hubitat>519 [latest-23028]2023-02-11T23:27:50.780Z <Rule:INFO> Porch Motion Extended check (rule-l3kr45m8 in Porch) starting evaluation; because entity-changed BinarySensor#hubitat>519 [latest-23028]2023-02-11T23:27:50.780Z <Rule:INFO> Porch Light Manual On (rule-kmtxw155 in Porch) starting evaluation; because entity-changed BinarySensor#hubitat>519Snippet from the reactor.yaml:
# action_pace: 100 # warn_unresponsive: true # probe_device: hubitat>132 (not needed if Hub Information app installed) probe_device: hubitat>2 # probe_action: x_hubitat_Configuration.configure (not needed if Hub Information app installed) probe_action: x_hubitat_Configuration.configure # probe_action: x_hubitat_Refresh.refreshSynology Docker latest-23028
Hubitat v2.3.4.139
Hub Information Driver v3
Default Sunrise/Sunset entry. Bug or by design?
-
When you add a Sunrise/Sunset condition, it defaults to Between Sunrise and Sunrise. IIRC RfV used to default to between Sunset to Sunrise. Either way. Not sure if this Sunrise to Sunrise is by design or should Sunrise to Sunset.
-
I had noticed that, too, and wondered if it would impact anyone's workflow. (I so rarely use that condition, it slipped my mind to mention.)
-
It tripped me up the first time I noticed it. I have a rule set to run at night and a slightly similar rule to run during the day. For testing I put notifications on them and was confused when I got the day time and nighttime notifications at night. My rules were Sunset to Sunrise and Sunrise to Sunrise. It was a very quick fix and I am aware of it now, but maybe should change?
-
I think Patrick will take your feedback to heart. What's funny is that I constantly get "Sunrise" and "Sunset" confused (as terms) in my head, so I always have to pay extra special attention when creating such rules. I was so focused that the switch-a-roo escaped my conscious notice.
-
Maybe he's done it to force a review of those two fields? If so, perhaps leaving them blank in some way as the default? Just spitballing - haven't even had coffee yet this morning
-
@librasun That happens to me when I rush. My brain "sees" what it wants the field to be and I speed onward only to come back and fix later.
-
Locked by toggledbits
