Skip to content
  • Categories
  • Recent
  • Tags
  • Popular
  • Unsolved
Collapse
Discussion Forum to share and further the development of home control and automation, independent of platforms.
  1. Home
  2. Software
  3. Multi-System Reactor
  4. Updated to latest MSR 21243 and no entities are being executed I Hubitat
Gradually turn on lights.
Tom_DT
I have several lights that I would like to turn on very gradually over 15 or 20 seconds. from 0 to .25 in .01 increments. I have tried a few things that came nowhere near working, so here I am.
Multi-System Reactor
Stop the MSR by an external switch on Hubitat.
wmarcolinW
Use case: When performing home maintenance, such as air conditioning, I want all rules involving air conditioning to be disabled. To do this, to day, I have a virtual switch that I placed within all rules involving air conditioning, meaning that if I turn it off, none of them work. Then another situation: the water pump system and garden irrigation, another switch. In short, I had to create several virtual switches in Hubitat to disable rules in MSR. Unfortunately, however, I was unable to cover all scenarios, so I wondered if it would be possible for MSR to support a virtual MSR switch, which, when configured in the reactor settings, would function as a general on/off switch for MSR. If it is configured and turned off, the entire rules and actions in MSR stops working, except for the status change reading process, specifically for this switch, which, when turned on, would restart the MSR. Would it be possible to do something like this? Any recommendations from the experts?
Multi-System Reactor
Error After Upgrade
T
Topic thumbnail image
Multi-System Reactor
Reset attribute value of entity in event handler
R
Topic thumbnail image
Multi-System Reactor
Need help figuring out how to delay a reset on reaction
T
Topic thumbnail image
Multi-System Reactor
Way to search for rules (rule state) in other rules
T
@toggledbits, not sure if this is a feature request or I'm using the search tool wrong. You have a "Search for rule" in the Rules Set tab in MSR. It works nicely to find a rule and bring up said rule, but can it/could it be used for as a "where used?" global search? For instance, I have a fairly large set of rules, divided up into 10 different rulesets. There's easily a hundred individual rules, and many of the rules have Rule State triggers, which of course refer to other rules. Amongst my troubleshooting today, I came across what may have been a duplicate or troubleshooting attempt, but I can't tell if it's actually used as a Rule State in another rule without opening each rule that I suspect it may be a part of. Thanks.
Multi-System Reactor
Links to MSR from HA
Tom_DT
I am using Home Assistant a lot recently. On a dashboard showing the devices, I would like to show a link to the MSR rule that controls the devices. Is there a way to link directly into MSR?
Multi-System Reactor
Set Reaction > Script Action
wmarcolinW
Topic thumbnail image
Multi-System Reactor
Errors after updating to MQTTController build 25139
tunnusT
I'm running MSR build 25139 on Docker, using MQTT controller 24293, and everything working as expected. But if I try to upgrade to MQTTController build 25139, I'm getting the following errors on MSR UI: An Entity Attribute condition in "Lay-Z-Spa auto heating off" (Terrace) failed because the referenced entity "Lay-Z-Spa States" (mqtt>layzspa_states) does not have attribute value_sensor.god Last 11:20:37 An Entity Attribute condition in "Lay-Z-Spa auto heating off" (Terrace) failed because the referenced entity "Lay-Z-Spa States" (mqtt>layzspa_states) does not have attribute temperature_sensor.green Last 11:20:37 An Entity Attribute condition in "Lay-Z-Spa filter pump auto off" (Terrace) failed because the referenced entity "Lay-Z-Spa States" (mqtt>layzspa_states) does not have attribute temperature_sensor.red Last 11:20:37 An Entity Attribute condition in "Lay-Z-Spa filter pump auto run" (Terrace) failed because the referenced entity "Lay-Z-Spa States" (mqtt>layzspa_states) does not have attribute value_sensor.pump Last 11:20:37 An Entity Attribute condition in "Lay-Z-Spa watchdog" (Terrace) failed because the referenced entity "Lay-Z-Spa States" (mqtt>layzspa_states) does not have attribute value_sensor.status Last 11:20:37 My MQTT configuration (local_mqtt_devices.yaml) for the related entity is: layzspa_message: type: ValueSensor capabilities: ["temperature_sensor", "value_sensor", "power_sensor"] primary_attribute: power_sensor.value events: "layzspa/message": "power_sensor.value": json_payload: true if_expr: '! isnull( payload?.PWR )' expr: "float(payload.PWR)" "value_sensor.air": json_payload: true if_expr: '! isnull( payload?.AIR )' expr: "float(payload.AIR)" "value_sensor.pump": json_payload: true if_expr: '! isnull( payload?.FLT )' expr: "float(payload.FLT)" "value_sensor.god": json_payload: true if_expr: '! isnull( payload?.GOD )' expr: "float(payload.GOD)" "value_sensor.lock": json_payload: true if_expr: '! isnull( payload?.LCK )' expr: "float(payload.LCK)" "value_sensor.unit": json_payload: true if_expr: '! isnull( payload?.UNT )' expr: "float(payload.UNT)" "value_sensor.error": json_payload: true if_expr: '! isnull( payload?.ERR )' expr: "float(payload.ERR)" "temperature_sensor.green": json_payload: true if_expr: '! isnull( payload?.GRN )' expr: "float(payload.GRN)" "temperature_sensor.red": json_payload: true if_expr: '! isnull( payload?.RED )' expr: "float(payload.RED)" "temperature_sensor.target": json_payload: true if_expr: '! isnull( payload?.TGT )' expr: "float(payload.TGT)" "temperature_sensor.value": json_payload: true if_expr: '! isnull( payload?.TMP )' expr: "float(payload.TMP)" "temperature_sensor.virtual": json_payload: true if_expr: '! isnull( payload?.VTM )' expr: "round(float(payload.VTM), 1)" "temperature_sensor.ambient": json_payload: true if_expr: '! isnull( payload?.AMB )' expr: "float(payload.AMB)" "layzspa/Status": "value_sensor.status": if_expr: '! isnull( payload )' expr: "payload" "layzspa/button": "value_sensor.button": if_expr: '! isnull( payload )' expr: "payload" and in reactor.yaml I have: "layzspa_states": name: "Lay-Z-Spa States" friendly_name: 'Lay-Z-Spa States' include: layzspa_message I realize my MQTT configuration might be a bit unorthodox, but could there still be something unintentional in the latest MQTTController build? If needed, I can provide detailed logs.
Multi-System Reactor
🎉 My very first MSR controller: OpenSprinkler
therealdbT
Since today is my birthday - and I still pretend to be unconventional - I'm giving away a present to this wonderful community and I'm releasing my first OpenSprinkler controller for MSR. It was real fun to code it - and while it's still WIP, it seems to work OK for me. It's polling-based at the moment, but I'll add support for updates via MQTT very soon (it's already partially coded). Get it at (install is similar to MQTTController and such): https://github.com/dbochicchio/reactor-opensprinkler Feel free to try it. It's beta software, but it's stable. I'll update it weekly until all the tasks from my todo list are empty. Since I've learnt a lot from this controller, I'll explore new controllers soon.
Multi-System Reactor
Advice reqeusted to migrate MSR from Bare Metal to Container
T
Good day all, I'm in the process of trying to shut down my 10 year old Linux home server that served many purposes, but primarily it's what I used for my NAS/Plex Media server. I migrated the NAS aspect of the server in November of last year to a true NAS solution (Ubiquti UNAS Pro), which is rack mount and much more efficient than my old tower, which it's only side benefit was heating my home office during the winter. Unfortunately it also means heating my home office during the summer, which were about to be in full swing. I have two things running on this 10 year old server at this point. MSR and pi-hole. I'm running Plex Media Server on Fedora Workstation in Podman on mini PC, which is much more energy efficient than my old tower. My next step is to migrate MSR. I know there are images of MSR out there, and creating it is well documented. I'm going to be using Podman instead of Docker for various reasons, but they work very similar. What I don't know, is what I need to do to migrate my existing Bare Metal installation over to a container. Has anyone done this? Any advice?
Multi-System Reactor
Reactor (Multi-System/Multi-Hub) Announcements
toggledbitsT
Build 21228 has been released. Docker images available from DockerHub as usual, and bare-metal packages here. Home Assistant up to version 2021.8.6 supported; the online version of the manual will now state the current supported versions; Fix an error in OWMWeatherController that could cause it to stop updating; Unify the approach to entity filtering on all hub interface classes (controllers); this works for device entities only; it may be extended to other entities later; Improve error detail in messages for EzloController during auth phase; Add isRuleSet() and isRuleEnabled() functions to expressions extensions; Implement set action for lock and passage capabilities (makes them more easily scriptable in some cases); Fix a place in the UI where 24-hour time was not being displayed.
Multi-System Reactor
Can´t restart or upgrade/deploy MSR
F
Topic thumbnail image
Multi-System Reactor
[Solved] Limit HA Entity in MSR
wmarcolinW
Topic thumbnail image
Multi-System Reactor
Organizing/ structuring rule sets and rules
R
Hi guys, Just wondering how you guys organize your rule sets and rules. I wish I had an extra layer to have some more granularity, but my feature request was not popular. Maybe there are better ways to organize my rule sets. I use the rule sets now primarily for rooms. So a rule set per room. But maybe grouping by functionality works better. Any examples/ suggestions would be appreciated.
Multi-System Reactor
Moving MSR from a QNAP container to RP 5 - some issues
Tom_DT
Topic thumbnail image
Multi-System Reactor
Widget deletion does not work and landing page (status) is empy
M
Topic thumbnail image
Multi-System Reactor
Need help reducing false positive notifications
T
Topic thumbnail image
Multi-System Reactor
Deleting widgets
tunnusT
Hopefully a trivial question, but how do you delete widgets in a status page? Using build 22266
Multi-System Reactor
MQTT configuration question
tunnusT
I have the following yaml configuration in local_mqtt_devices file x_mqtt_device: set_speed: arguments: speed: type: str topic: "command/%friendly_name%" payload: type: json expr: '{ "fan": parameters.speed }' While this works fine, I'm wondering how this could be changed to "fixed" parameters, as in this case "fan" only accepts "A", "Q" or a numeric value of 1-5?
Multi-System Reactor

Updated to latest MSR 21243 and no entities are being executed I Hubitat

Scheduled Pinned Locked Moved Multi-System Reactor
47 Posts 6 Posters 4.7k Views 6 Watching
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • toggledbitsT Offline
    toggledbitsT Offline
    toggledbits
    wrote on last edited by
    #32

    No, we're not done. That's not the way to run Reactor. You need to be running it under systemd. Please provide the information above as requested.

    Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

    M 1 Reply Last reply
    0
    • toggledbitsT toggledbits

      No, we're not done. That's not the way to run Reactor. You need to be running it under systemd. Please provide the information above as requested.

      M Offline
      M Offline
      Matteburk
      wrote on last edited by toggledbits
      #33

      @toggledbits
      hehe.... went exited

      /etc/systemd/system/reactor.service......

      [Unit]
      Description=Multi System Reactor
      After=network.target
      
      [Service]
      Type=simple
      User=pi
      WorkingDirectory=/home/pi/reactor
      Environment=NODE_PATH=/home/pi/reactor
      ExecStart=/home/pi/.local/lib/nodejs/node-v14.15.4-linux-armv7l/bin/node
      
      
      
      Restart=on-failure
      RestartSec=5s
      
      [Install]
      WantedBy=multi-user.target
      

      Reactor log......

      2021-09-06T20:07:08.063Z <app:null> Reactor "1.0.1-21243-ab6d917" starting on v14.15.4
      2021-09-06T20:07:08.066Z <app:INFO> Process ID 3029; platform linux/arm #1408 SMP Mon Mar 22 12:49:24 GMT 2021; locale [ "sv-SE", "UTF-8" ]
      2021-09-06T20:07:08.067Z <app:INFO> Basedir /home/pi/reactor; data in /home/pi/reactor/storage
      2021-09-06T20:07:08.067Z <app:INFO> NODE_PATH /home/pi/reactor; module paths [ "/home/pi/reactor/node_modules", "/home/pi/node_modules", "/home/node_modules", "/node_modules" ]
      2021-09-06T20:07:08.241Z <Plugin:null> Module Plugin v21173
      2021-09-06T20:07:08.273Z <default:INFO> Module Entity v21177
      2021-09-06T20:07:08.284Z <Controller:null> Module Controller v21226
      2021-09-06T20:07:08.286Z <default:null> Module Structure v21229
      2021-09-06T20:07:08.305Z <default:null> Module Ruleset v21096
      2021-09-06T20:07:08.306Z <default:null> Module Rulesets v21096
      2021-09-06T20:07:08.380Z <default:null> Module Rule v21224
      2021-09-06T20:07:08.397Z <default:null> Module Engine v21213
      2021-09-06T20:07:08.399Z <default:null> Module httpapi v21238
      2021-09-06T20:07:08.406Z <default:null> Module httpproxy v21054
      2021-09-06T20:07:08.450Z <default:null> Module wsapi v21196
      2021-09-06T20:07:08.454Z <app:NOTICE> Starting Structure...
      2021-09-06T20:07:08.463Z <Structure:INFO> Structure#1 starting controller interface vera (VeraController)
      2021-09-06T20:07:08.473Z <Structure:INFO> Structure#1 starting controller interface hubitat (HubitatController)
      2021-09-06T20:07:08.480Z <Structure:INFO> Structure#1 starting controller interface reactor_system (SystemController)
      2021-09-06T20:07:08.622Z <default:null> Module VeraController v21236
      2021-09-06T20:07:08.629Z <default:null> Module HubitatController v21243
      2021-09-06T20:07:08.632Z <default:null> Module SystemController v21102
      2021-09-06T20:07:08.642Z <VeraController:NOTICE> VeraController#vera starting
      2021-09-06T20:07:08.765Z <VeraController:INFO> VeraController#vera loaded mapping ver 21236 rev 1 format 1 notice 
      2021-09-06T20:07:08.767Z <VeraController:INFO> VeraController: deviceclass vera_system_object capability sys_system does not provide attribute state
      2021-09-06T20:07:08.887Z <Controller:NOTICE> Controller SystemController#reactor_system is now online.
      2021-09-06T20:07:09.035Z <app:INFO> Structure running; pausing for controllers' initial ready
      2021-09-06T20:07:09.044Z <Controller:NOTICE> HubitatController#hubitat not ready; performing initial connect/query
      2021-09-06T20:07:09.629Z <VeraController:NOTICE> Controller VeraController#vera is now online.
      2021-09-06T20:07:10.118Z <Controller:ERR> HubitatController#hubitat mapped capability x_hubitat_healthcheck has no implementation
      2021-09-06T20:07:10.158Z <Controller:ERR> HubitatController#hubitat mapped capability x_hubitat_healthcheck has no implementation
      2021-09-06T20:07:10.274Z <Controller:ERR> HubitatController#hubitat mapped capability x_hubitat_healthcheck has no implementation
      2021-09-06T20:07:10.281Z <Controller:ERR> HubitatController#hubitat mapped capability x_hubitat_healthcheck has no implementation
      2021-09-06T20:07:10.287Z <Controller:ERR> HubitatController#hubitat mapped capability x_hubitat_healthcheck has no implementation
      2021-09-06T20:07:10.289Z <Controller:ERR> HubitatController#hubitat mapped capability x_hubitat_healthcheck has no implementation
      2021-09-06T20:07:10.318Z <Controller:ERR> HubitatController#hubitat mapped capability x_hubitat_healthcheck has no implementation
      2021-09-06T20:07:10.326Z <Controller:ERR> HubitatController#hubitat mapped capability x_hubitat_healthcheck has no implementation
      2021-09-06T20:07:10.331Z <Controller:ERR> HubitatController#hubitat mapped capability x_hubitat_healthcheck has no implementation
      2021-09-06T20:07:10.478Z <Controller:INFO> HubitatController#hubitat connecting to hub's eventsocket WebSocket API at ws://192.168.68.145/eventsocket
      2021-09-06T20:07:10.484Z <Controller:NOTICE> Controller HubitatController#hubitat is now online.
      2021-09-06T20:07:10.489Z <app:NOTICE> Starting Reaction Engine...
      2021-09-06T20:07:10.491Z <Engine:INFO> Reaction Engine starting
      2021-09-06T20:07:10.492Z <Engine:INFO> Checking rule sets...
      2021-09-06T20:07:10.504Z <Engine:INFO> Checking rules...
      2021-09-06T20:07:10.506Z <Engine:INFO> Data check complete; no corrections.
      
      1 Reply Last reply
      0
      • toggledbitsT Offline
        toggledbitsT Offline
        toggledbits
        wrote on last edited by
        #34

        OK. Looks good.

        First, make sure your command line Reactor is stopped. This is important, obviously, as the systemd Reactor will not start and keep trying to start if your command line Reactor is still running. Also, let's remove the existing Reactor log file:

            rm /home/pi/reactor/logs/reactor.log
        

        Then, sudo systemctl daemon-reload

        Then, sudo systemctl restart reactor

        Then try to get into the Reactor UI. If you can't get into the UI, look at the reactor.log file for messages. In you still have the "common/util" exception, go up to the startup lines and look at what it reports for NODE_PATH and post that here.

        Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

        M 1 Reply Last reply
        0
        • toggledbitsT toggledbits

          OK. Looks good.

          First, make sure your command line Reactor is stopped. This is important, obviously, as the systemd Reactor will not start and keep trying to start if your command line Reactor is still running. Also, let's remove the existing Reactor log file:

              rm /home/pi/reactor/logs/reactor.log
          

          Then, sudo systemctl daemon-reload

          Then, sudo systemctl restart reactor

          Then try to get into the Reactor UI. If you can't get into the UI, look at the reactor.log file for messages. In you still have the "common/util" exception, go up to the startup lines and look at what it reports for NODE_PATH and post that here.

          M Offline
          M Offline
          Matteburk
          wrote on last edited by
          #35

          @toggledbits Could not reach thrue UI .

          The reactor.log file is no missing since the rm command.....

          1 Reply Last reply
          0
          • toggledbitsT Offline
            toggledbitsT Offline
            toggledbits
            wrote on last edited by toggledbits
            #36

            OK. Then /var/log/syslog

            And tell me, how did you edit the service file? There are some excess blank lines in what you posted when I got it formatted as code on the forums... that's... odd... did you edit it on the system, or did you pull it up to a Mac or Windows, edit it, and then push it down? Or something else?

            Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

            1 Reply Last reply
            0
            • M Offline
              M Offline
              Matteburk
              wrote on last edited by
              #37

              I edited them directly on the pie in the textfile.

              this is what the var log file said:

              Sep 6 22:17:23 raspberrypi dhcpcd[428]: wlan0: fe80::465:fde6:f33:2344 is reachable again
              Sep 6 22:17:23 raspberrypi avahi-daemon[429]: Withdrawing address record for fe80::2598:15e9:620:fe7d on eth0.
              Sep 6 22:17:26 raspberrypi dhcpcd[428]: eth0: leased 192.168.68.126 for 7200 seconds
              Sep 6 22:17:26 raspberrypi avahi-daemon[429]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.68.126.
              Sep 6 22:17:26 raspberrypi dhcpcd[428]: eth0: adding route to 192.168.68.0/24
              Sep 6 22:17:26 raspberrypi dhcpcd[428]: eth0: adding default route via 192.168.68.1
              Sep 6 22:17:26 raspberrypi avahi-daemon[429]: New relevant interface eth0.IPv4 for mDNS.
              Sep 6 22:17:26 raspberrypi avahi-daemon[429]: Registering new address record for 192.168.68.126 on eth0.IPv4.
              Sep 6 22:17:34 raspberrypi systemd[1]: systemd-fsckd.service: Succeeded.
              Sep 6 22:50:34 raspberrypi systemd-timesyncd[339]: Synchronized to time server for the first time 178.16.128.13:123 (2.debian.pool.ntp.org).
              Sep 6 22:50:41 raspberrypi systemd[1]: systemd-hostnamed.service: Succeeded.
              Sep 6 22:53:32 raspberrypi dbus-daemon[626]: [session uid=1000 pid=626] Activating service name='ca.desrt.dconf' requested by ':1.28' (uid=1000 pid=1084 comm="mousepad /var/log/syslog ")
              Sep 6 22:53:32 raspberrypi dbus-daemon[626]: [session uid=1000 pid=626] Successfully activated service 'ca.desrt.dconf'
              Sep 6 22:54:50 raspberrypi dbus-daemon[418]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.51' (uid=1000 pid=1100 comm="/usr/lib/chromium-browser/chromium-browser-v7 --fo")
              Sep 6 22:54:50 raspberrypi systemd[1]: Starting Hostname Service...
              Sep 6 22:54:50 raspberrypi dbus-daemon[418]: [system] Successfully activated service 'org.freedesktop.hostname1'
              Sep 6 22:54:50 raspberrypi systemd[1]: Started Hostname Service.
              Sep 6 22:54:50 raspberrypi gvfsd[665]: mkdir failed on directory /var/cache/samba: Åtkomst nekas
              Sep 6 22:54:50 raspberrypi gvfsd[665]: mkdir failed on directory /var/cache/samba: Åtkomst nekas
              Sep 6 22:54:51 raspberrypi gvfsd[665]: mkdir failed on directory /var/cache/samba: Åtkomst nekas
              Sep 6 22:54:51 raspberrypi gvfsd[665]: mkdir failed on directory /var/cache/samba: Åtkomst nekas
              Sep 6 22:54:52 raspberrypi gvfsd[665]: mkdir failed on directory /var/cache/samba: Åtkomst nekas
              Sep 6 22:54:52 raspberrypi gvfsd[665]: mkdir failed on directory /var/cache/samba: Åtkomst nekas
              Sep 6 22:54:53 raspberrypi gvfsd[665]: mkdir failed on directory /var/cache/samba: Åtkomst nekas
              Sep 6 22:54:53 raspberrypi gvfsd[665]: mkdir failed on directory /var/cache/samba: Åtkomst nekas
              Sep 6 22:54:54 raspberrypi gvfsd[665]: mkdir failed on directory /var/cache/samba: Åtkomst nekas
              Sep 6 22:54:54 raspberrypi gvfsd[665]: mkdir failed on directory /var/cache/samba: Åtkomst nekas
              Sep 6 22:54:55 raspberrypi gvfsd[665]: mkdir failed on directory /var/cache/samba: Åtkomst nekas
              Sep 6 22:54:55 raspberrypi gvfsd[665]: mkdir failed on directory /var/cache/samba: Åtkomst nekas

              1 Reply Last reply
              0
              • toggledbitsT Offline
                toggledbitsT Offline
                toggledbits
                wrote on last edited by toggledbits
                #38

                I just noticed, the ExecStart line in your edited service file is incomplete. It should read:

                    ExecStart=/home/pi/.local/lib/nodejs/node-v14.15.4-linux-armv7l/bin/node app -p
                

                Fix that. Then do:

                    sudo systemctl daemon-reload
                    sudo systemctl restart reactor
                

                Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                M 1 Reply Last reply
                0
                • toggledbitsT toggledbits

                  I just noticed, the ExecStart line in your edited service file is incomplete. It should read:

                      ExecStart=/home/pi/.local/lib/nodejs/node-v14.15.4-linux-armv7l/bin/node app -p
                  

                  Fix that. Then do:

                      sudo systemctl daemon-reload
                      sudo systemctl restart reactor
                  
                  M Offline
                  M Offline
                  Matteburk
                  wrote on last edited by
                  #39

                  @toggledbits said in Updated to latest MSR 21243 and no entities are being executed I Hubitat:

                  ExecStart=/home/pi/.local/lib/nodejs/node-v14.15.4-linux-armv7l/bin/node app -p

                  Changed it and now i can reach msr thrue UI!

                  Here is the reactor.log

                  2021-09-06T21:05:42.633Z app:null Reactor "1.0.1-21243-ab6d917" starting on v14.15.4
                  2021-09-06T21:05:42.636Z app:INFO Process ID 1780; platform linux/arm #1408 SMP Mon Mar 22 12:49:24 GMT 2021; locale [ "sv-SE", "UTF-8" ]
                  2021-09-06T21:05:42.637Z app:INFO Basedir /home/pi/reactor; data in /home/pi/reactor/storage
                  2021-09-06T21:05:42.637Z app:INFO NODE_PATH /home/pi/reactor; module paths [ "/home/pi/reactor/node_modules", "/home/pi/node_modules", "/home/node_modules", "/node_modules" ]
                  2021-09-06T21:05:42.781Z Plugin:null Module Plugin v21173
                  2021-09-06T21:05:42.797Z default:INFO Module Entity v21177
                  2021-09-06T21:05:42.805Z Controller:null Module Controller v21226
                  2021-09-06T21:05:42.806Z default:null Module Structure v21229
                  2021-09-06T21:05:42.822Z default:null Module Ruleset v21096
                  2021-09-06T21:05:42.823Z default:null Module Rulesets v21096
                  2021-09-06T21:05:42.869Z default:null Module Rule v21224
                  2021-09-06T21:05:42.880Z default:null Module Engine v21213
                  2021-09-06T21:05:42.881Z default:null Module httpapi v21238
                  2021-09-06T21:05:42.886Z default:null Module httpproxy v21054
                  2021-09-06T21:05:42.925Z default:null Module wsapi v21196
                  2021-09-06T21:05:42.928Z app:NOTICE Starting Structure...
                  2021-09-06T21:05:42.936Z Structure:INFO Structure#1 starting controller interface vera (VeraController)
                  2021-09-06T21:05:42.944Z Structure:INFO Structure#1 starting controller interface hubitat (HubitatController)
                  2021-09-06T21:05:42.947Z Structure:INFO Structure#1 starting controller interface reactor_system (SystemController)
                  2021-09-06T21:05:43.018Z default:null Module VeraController v21236
                  2021-09-06T21:05:43.026Z default:null Module HubitatController v21243
                  2021-09-06T21:05:43.029Z default:null Module SystemController v21102
                  2021-09-06T21:05:43.037Z VeraController:NOTICE VeraController#vera starting
                  2021-09-06T21:05:43.145Z VeraController:INFO VeraController#vera loaded mapping ver 21236 rev 1 format 1 notice
                  2021-09-06T21:05:43.148Z VeraController:INFO VeraController: deviceclass vera_system_object capability sys_system does not provide attribute state
                  2021-09-06T21:05:43.227Z Controller:NOTICE Controller SystemController#reactor_system is now online.
                  2021-09-06T21:05:43.339Z app:INFO Structure running; pausing for controllers' initial ready
                  2021-09-06T21:05:43.347Z Controller:NOTICE HubitatController#hubitat not ready; performing initial connect/query
                  2021-09-06T21:05:43.896Z VeraController:NOTICE Controller VeraController#vera is now online.
                  2021-09-06T21:05:45.291Z Controller:ERR HubitatController#hubitat mapped capability x_hubitat_healthcheck has no implementation
                  2021-09-06T21:05:45.322Z Controller:ERR HubitatController#hubitat mapped capability x_hubitat_healthcheck has no implementation
                  2021-09-06T21:05:45.383Z Controller:ERR HubitatController#hubitat mapped capability x_hubitat_healthcheck has no implementation
                  2021-09-06T21:05:45.387Z Controller:ERR HubitatController#hubitat mapped capability x_hubitat_healthcheck has no implementation
                  2021-09-06T21:05:45.391Z Controller:ERR HubitatController#hubitat mapped capability x_hubitat_healthcheck has no implementation
                  2021-09-06T21:05:45.394Z Controller:ERR HubitatController#hubitat mapped capability x_hubitat_healthcheck has no implementation
                  2021-09-06T21:05:45.409Z Controller:ERR HubitatController#hubitat mapped capability x_hubitat_healthcheck has no implementation
                  2021-09-06T21:05:45.414Z Controller:ERR HubitatController#hubitat mapped capability x_hubitat_healthcheck has no implementation
                  2021-09-06T21:05:45.418Z Controller:ERR HubitatController#hubitat mapped capability x_hubitat_healthcheck has no implementation
                  2021-09-06T21:05:45.510Z Controller:INFO HubitatController#hubitat connecting to hub's eventsocket WebSocket API at ws://192.168.68.145/eventsocket
                  2021-09-06T21:05:45.517Z Controller:NOTICE Controller HubitatController#hubitat is now online.
                  2021-09-06T21:05:45.522Z app:NOTICE Starting Reaction Engine...
                  2021-09-06T21:05:45.524Z Engine:INFO Reaction Engine starting
                  2021-09-06T21:05:45.525Z Engine:INFO Checking rule sets...
                  2021-09-06T21:05:45.542Z Engine:INFO Checking rules...
                  2021-09-06T21:05:45.544Z Engine:INFO Data check complete; no corrections.

                  1 Reply Last reply
                  0
                  • toggledbitsT Offline
                    toggledbitsT Offline
                    toggledbits
                    wrote on last edited by
                    #40

                    That's better. OK, no more command line. Do this as well:

                        sudo systemctl enable reactor
                    

                    This will tell systemd to start Reactor at boot (which you should then test). If you have any other mechanism for starting Reactor at boot (e.g. modified .profile or bashrc files), then those will need to be removed/disabled.

                    Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                    toggledbitsT 1 Reply Last reply
                    0
                    • M Offline
                      M Offline
                      Matteburk
                      wrote on last edited by
                      #41

                      ok... what does that line do?

                      got this
                      pi@raspberrypi:~ $ sudo systemctl enable reactor
                      Created symlink /etc/systemd/system/multi-user.target.wants/reactor.service \u2192 /etc/systemd/system/reactor.service.
                      pi@raspberrypi:~ $

                      1 Reply Last reply
                      0
                      • toggledbitsT toggledbits

                        That's better. OK, no more command line. Do this as well:

                            sudo systemctl enable reactor
                        

                        This will tell systemd to start Reactor at boot (which you should then test). If you have any other mechanism for starting Reactor at boot (e.g. modified .profile or bashrc files), then those will need to be removed/disabled.

                        toggledbitsT Offline
                        toggledbitsT Offline
                        toggledbits
                        wrote on last edited by
                        #42

                        @toggledbits said in Updated to latest MSR 21243 and no entities are being executed I Hubitat:

                        This will tell systemd to start Reactor at boot (which you should then test). If you have any other mechanism for starting Reactor at boot (e.g. modified .profile or bashrc files), then those will need to be removed/disabled.

                        Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                        M 1 Reply Last reply
                        0
                        • toggledbitsT toggledbits

                          @toggledbits said in Updated to latest MSR 21243 and no entities are being executed I Hubitat:

                          This will tell systemd to start Reactor at boot (which you should then test). If you have any other mechanism for starting Reactor at boot (e.g. modified .profile or bashrc files), then those will need to be removed/disabled.

                          M Offline
                          M Offline
                          Matteburk
                          wrote on last edited by
                          #43

                          @toggledbits
                          ok.... I cut the power and restarted the pie and msr got up by it self!!

                          Coool!

                          1 Reply Last reply
                          0
                          • toggledbitsT Offline
                            toggledbitsT Offline
                            toggledbits
                            wrote on last edited by
                            #44

                            Noice! OK. You're on your way! NOW we're finished! 🙂

                            Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                            M 1 Reply Last reply
                            0
                            • toggledbitsT toggledbits

                              Noice! OK. You're on your way! NOW we're finished! 🙂

                              M Offline
                              M Offline
                              Matteburk
                              wrote on last edited by
                              #45

                              @toggledbits

                              Big thanx again Patrick!
                              Keep up the good work!!

                              Now bedtime in Sweden!

                              /Mattias

                              1 Reply Last reply
                              1
                              • tunnusT tunnus

                                @matteburk could check this post, although you probably have some other issue

                                tunnusT Offline
                                tunnusT Offline
                                tunnus
                                wrote on last edited by
                                #46

                                @tunnus said in Updated to latest MSR 21243 and no entities are being executed I Hubitat:

                                @matteburk could check this post, although you probably have some other issue

                                Well, it turned out you had the same issue

                                Using MSR on Docker (Synology NAS), having InfluxDB, Grafana & Home Assistant, Hubitat C-8, Zigbee2MQTT

                                1 Reply Last reply
                                1
                                • G Offline
                                  G Offline
                                  gwp1
                                  wrote on last edited by
                                  #47

                                  May I say to you all - thank you!

                                  I undertook the mini-project of migrating MSR from SD card to SSD. Full transparency, I'm not a Linux guy in any way/shape/form so there was a good deal of feeling my way thru the dark. Once I got it moved and running (honestly, on the first try!) I wanted the next logical step of start/restart at boot. Was really fumbling until I found this thread - it was better than any tutorial I'd been using.

                                  Success is mine: on the SSD and with everything starting at boot like desired.

                                  Thanks @Matteburk for making mistakes similar to mine and to @toggledbits for his INFINITE patience and guidance. (The app -p thing was actually a question I had after seeing an earlier screenshot in the thread and having removed it only to meet failure nose-to-nose.)

                                  *Hubitat C-7 2.4.1.177
                                  *Proxmox VE v8, Beelink MiniPC 12GBs, SSD

                                  *HASS 2025.6.0
                                  w/ ZST10-700 fw 7.18.3

                                  *Prod MSR in docker/portainer
                                  MSR: latest-25139-fbd67abc
                                  MQTTController: 25139
                                  ZWave Controller: 25139

                                  1 Reply Last reply
                                  1
                                  • toggledbitsT toggledbits locked this topic on
                                  Reply
                                  • Reply as topic
                                  Log in to reply
                                  • Oldest to Newest
                                  • Newest to Oldest
                                  • Most Votes


                                  Recent Topics

                                  • Gradually turn on lights.
                                    G
                                    gwp1
                                    0
                                    4
                                    69

                                  • Stop the MSR by an external switch on Hubitat.
                                    wmarcolinW
                                    wmarcolin
                                    0
                                    1
                                    8

                                  • Error After Upgrade
                                    G
                                    gwp1
                                    0
                                    4
                                    69

                                  • Reset attribute value of entity in event handler
                                    R
                                    RHCPNG
                                    0
                                    5
                                    142

                                  • Need help figuring out how to delay a reset on reaction
                                    G
                                    gwp1
                                    0
                                    22
                                    745

                                  • Way to search for rules (rule state) in other rules
                                    T
                                    tamorgen
                                    0
                                    3
                                    78

                                  • Links to MSR from HA
                                    Tom_DT
                                    Tom_D
                                    0
                                    1
                                    68

                                  • Set Reaction > Script Action
                                    wmarcolinW
                                    wmarcolin
                                    0
                                    11
                                    399

                                  • Wiring Samotech SM308-S into light fitting
                                    akbooerA
                                    akbooer
                                    0
                                    2
                                    128

                                  • Errors after updating to MQTTController build 25139
                                    toggledbitsT
                                    toggledbits
                                    0
                                    6
                                    230

                                  • 🎉 My very first MSR controller: OpenSprinkler
                                    therealdbT
                                    therealdb
                                    5
                                    13
                                    889

                                  • Advice reqeusted to migrate MSR from Bare Metal to Container
                                    T
                                    tamorgen
                                    0
                                    5
                                    234
                                  Powered by NodeBB | Contributors
                                  Hosted freely by 10RUPTiV - Solutions Technologiques | Contact us
                                  • Login

                                  • Don't have an account? Register

                                  • Login or register to search.
                                  • First post
                                    Last post
                                  0
                                  • Categories
                                  • Recent
                                  • Tags
                                  • Popular
                                  • Unsolved