@toggledbits, not sure if this is a feature request or I'm using the search tool wrong. You have a "Search for rule" in the Rules Set tab in MSR. It works nicely to find a rule and bring up said rule, but can it/could it be used for as a "where used?" global search? For instance, I have a fairly large set of rules, divided up into 10 different rulesets. There's easily a hundred individual rules, and many of the rules have Rule State triggers, which of course refer to other rules. Amongst my troubleshooting today, I came across what may have been a duplicate or troubleshooting attempt, but I can't tell if it's actually used as a Rule State in another rule without opening each rule that I suspect it may be a part of.
Thanks.
I'm running MSR build 25139 on Docker, using MQTT controller 24293, and everything working as expected. But if I try to upgrade to MQTTController build 25139, I'm getting the following errors on MSR UI:
An Entity Attribute condition in "Lay-Z-Spa auto heating off" (Terrace) failed because the referenced entity "Lay-Z-Spa States" (mqtt>layzspa_states) does not have attribute value_sensor.god
Last 11:20:37
An Entity Attribute condition in "Lay-Z-Spa auto heating off" (Terrace) failed because the referenced entity "Lay-Z-Spa States" (mqtt>layzspa_states) does not have attribute temperature_sensor.green
Last 11:20:37
An Entity Attribute condition in "Lay-Z-Spa filter pump auto off" (Terrace) failed because the referenced entity "Lay-Z-Spa States" (mqtt>layzspa_states) does not have attribute temperature_sensor.red
Last 11:20:37
An Entity Attribute condition in "Lay-Z-Spa filter pump auto run" (Terrace) failed because the referenced entity "Lay-Z-Spa States" (mqtt>layzspa_states) does not have attribute value_sensor.pump
Last 11:20:37
An Entity Attribute condition in "Lay-Z-Spa watchdog" (Terrace) failed because the referenced entity "Lay-Z-Spa States" (mqtt>layzspa_states) does not have attribute value_sensor.status
Last 11:20:37
My MQTT configuration (local_mqtt_devices.yaml) for the related entity is:
layzspa_message:
type: ValueSensor
capabilities: ["temperature_sensor", "value_sensor", "power_sensor"]
primary_attribute: power_sensor.value
events:
"layzspa/message":
"power_sensor.value":
json_payload: true
if_expr: '! isnull( payload?.PWR )'
expr: "float(payload.PWR)"
"value_sensor.air":
json_payload: true
if_expr: '! isnull( payload?.AIR )'
expr: "float(payload.AIR)"
"value_sensor.pump":
json_payload: true
if_expr: '! isnull( payload?.FLT )'
expr: "float(payload.FLT)"
"value_sensor.god":
json_payload: true
if_expr: '! isnull( payload?.GOD )'
expr: "float(payload.GOD)"
"value_sensor.lock":
json_payload: true
if_expr: '! isnull( payload?.LCK )'
expr: "float(payload.LCK)"
"value_sensor.unit":
json_payload: true
if_expr: '! isnull( payload?.UNT )'
expr: "float(payload.UNT)"
"value_sensor.error":
json_payload: true
if_expr: '! isnull( payload?.ERR )'
expr: "float(payload.ERR)"
"temperature_sensor.green":
json_payload: true
if_expr: '! isnull( payload?.GRN )'
expr: "float(payload.GRN)"
"temperature_sensor.red":
json_payload: true
if_expr: '! isnull( payload?.RED )'
expr: "float(payload.RED)"
"temperature_sensor.target":
json_payload: true
if_expr: '! isnull( payload?.TGT )'
expr: "float(payload.TGT)"
"temperature_sensor.value":
json_payload: true
if_expr: '! isnull( payload?.TMP )'
expr: "float(payload.TMP)"
"temperature_sensor.virtual":
json_payload: true
if_expr: '! isnull( payload?.VTM )'
expr: "round(float(payload.VTM), 1)"
"temperature_sensor.ambient":
json_payload: true
if_expr: '! isnull( payload?.AMB )'
expr: "float(payload.AMB)"
"layzspa/Status":
"value_sensor.status":
if_expr: '! isnull( payload )'
expr: "payload"
"layzspa/button":
"value_sensor.button":
if_expr: '! isnull( payload )'
expr: "payload"
and in reactor.yaml I have:
"layzspa_states":
name: "Lay-Z-Spa States"
friendly_name: 'Lay-Z-Spa States'
include: layzspa_message
I realize my MQTT configuration might be a bit unorthodox, but could there still be something unintentional in the latest MQTTController build? If needed, I can provide detailed logs.
Since today is my birthday - and I still pretend to be unconventional - I'm giving away a present to this wonderful community and I'm releasing my first OpenSprinkler controller for MSR. It was real fun to code it - and while it's still WIP, it seems to work OK for me. It's polling-based at the moment, but I'll add support for updates via MQTT very soon (it's already partially coded).
Get it at (install is similar to MQTTController and such):
https://github.com/dbochicchio/reactor-opensprinkler
Feel free to try it. It's beta software, but it's stable. I'll update it weekly until all the tasks from my todo list are empty.
Since I've learnt a lot from this controller, I'll explore new controllers soon.
Good day all,
I'm in the process of trying to shut down my 10 year old Linux home server that served many purposes, but primarily it's what I used for my NAS/Plex Media server. I migrated the NAS aspect of the server in November of last year to a true NAS solution (Ubiquti UNAS Pro), which is rack mount and much more efficient than my old tower, which it's only side benefit was heating my home office during the winter. Unfortunately it also means heating my home office during the summer, which were about to be in full swing.
I have two things running on this 10 year old server at this point. MSR and pi-hole. I'm running Plex Media Server on Fedora Workstation in Podman on mini PC, which is much more energy efficient than my old tower. My next step is to migrate MSR. I know there are images of MSR out there, and creating it is well documented. I'm going to be using Podman instead of Docker for various reasons, but they work very similar. What I don't know, is what I need to do to migrate my existing Bare Metal installation over to a container.
Has anyone done this? Any advice?
Build 21228 has been released. Docker images available from DockerHub as usual, and bare-metal packages here.
Home Assistant up to version 2021.8.6 supported; the online version of the manual will now state the current supported versions;
Fix an error in OWMWeatherController that could cause it to stop updating;
Unify the approach to entity filtering on all hub interface classes (controllers); this works for device entities only; it may be extended to other entities later;
Improve error detail in messages for EzloController during auth phase;
Add isRuleSet() and isRuleEnabled() functions to expressions extensions;
Implement set action for lock and passage capabilities (makes them more easily scriptable in some cases);
Fix a place in the UI where 24-hour time was not being displayed.
Hi guys,
Just wondering how you guys organize your rule sets and rules. I wish I had an extra layer to have some more granularity, but my feature request was not popular.
Maybe there are better ways to organize my rule sets.
I use the rule sets now primarily for rooms. So a rule set per room. But maybe grouping by functionality works better. Any examples/ suggestions would be appreciated.
I have the following yaml configuration in local_mqtt_devices file
x_mqtt_device:
set_speed:
arguments:
speed:
type: str
topic: "command/%friendly_name%"
payload:
type: json
expr: '{ "fan": parameters.speed }'
While this works fine, I'm wondering how this could be changed to "fixed" parameters, as in this case "fan" only accepts "A", "Q" or a numeric value of 1-5?
Hi!
I get this message when I'm on the status tab:
System Configuration Check
The time on this system and on the Reactor host are significantly different. This may be due to incorrect system configuration on either or both. Please check the configuration of both systems. The host reports 2025-04-01T15:29:29.252Z; browser reports 2025-04-01T15:29:40.528Z; difference 11.276 seconds.
I have MSR installed as a docker on my Home Assistant Blue / Hardkernel ODROID-N2/N2+. MSR version is latest-25082-3c348de6.
HA versions are:
Core 2025.3.4
Supervisor 2025.03.4
Operating System 15.1
I have restarted HA as well as MSR multiple times. This message didn´t show two weeks ago. Don´t know if it have anything to do with the latest MSR version.
Do anyone know what I can try?
Thanks in advance!
Let's Be Careful Out There (Hill Street reference...)
/Fanan
Reactor not starting on latest 21294
-
Just updated to latest 21294, ran usual update, It appears to start ok in console, but will not load in browser. The NODE_path looks correct but the console log show the below error.
log
NODE_PATH /data/data/com.termux/files/home/reactor: [latest-21294]2021-10-23T15:55:41.542Z <app:null> Reactor latest-21294-c13ea5d starting on v14.15.4 [latest-21294]2021-10-23T15:55:41.546Z <app:INFO> Process ID 14540; platform android/arm #1 SMP PREEMPT Wed Jan 16 09:21:08 CST 2019; locale en_US.UTF-8 [latest-21294]2021-10-23T15:55:41.547Z <app:INFO> Basedir /data/data/com.termux/files/home/reactor; data in /data/data/com.termux/files/home/reactor/storage [latest-21294]2021-10-23T15:55:41.548Z <app:INFO> NODE_PATH /data/data/com.termux/files/home/reactor: /data/data/com.termux/files/home/reactor/app.js:231 throw new Error(a0_0x4c6635(0xd9) + process[a0_0x4c6635(0xdb)][a0_0x4c6635(0x107)] + '\x20does\x20not\x20point\x20to\x20the\x20Reactor\x20install\x20directory'); ^ Error: Environment NODE_PATH=/data/data/com.termux/files/home/reactor: does not point to the Reactor install directory at Object.<anonymous> (/data/data/com.termux/files/home/reactor/app.js:231:15) at Module._compile (internal/modules/cjs/loader.js:1063:30) at Object.Module._extensions..js (internal/modules/cjs/loader.js:1092:10) at Module.load (internal/modules/cjs/loader.js:928:32) at Function.Module._load (internal/modules/cjs/loader.js:769:14) at Function.executeUserEntryPoint [as runMain] (internal/modules/run_main.js:72:12) at internal/main/run_main_module.js:17:47 NODE_PATH /data/data/com.termux/files/home/reactor: [latest-21294]2021-10-23T15:55:41.796Z <app:null> Reactor latest-21294-c13ea5d starting on v14.15.4 [latest-21294]2021-10-23T15:55:41.800Z <app:INFO> Process ID 14547; platform android/arm #1 SMP PREEMPT Wed Jan 16 09:21:08 CST 2019; locale en_US.UTF-8 [latest-21294]2021-10-23T15:55:41.801Z <app:INFO> Basedir /data/data/com.termux/files/home/reactor; data in /data/data/com.termux/files/home/reactor/storage [latest-21294]2021-10-23T15:55:41.801Z <app:INFO> NODE_PATH /data/data/com.termux/files/home/reactor: /data/data/com.termux/files/home/reactor/app.js:231 throw new Error(a0_0x4c6635(0xd9) + process[a0_0x4c6635(0xdb)][a0_0x4c6635(0x107)] + '\x20does\x20not\x20point\x20to\x20the\x20Reactor\x20install\x20directory'); ^ ```===group ```java===
-
That suggests that
server/lib/Logger.jscannot be found under the directory given. Make sure your unzip and copy of the files from the distribution is complete.Edit: looking more carefully at it, it appears that the ':' at the end of the path in
NODE_PATHis not from the messages, but is actually in the path. That's an error. -
server/lib/Logger.jsis there in the reactor folder
I can start reactor withNODE_PATH=$(pwd) node app.jsand see it in browser
but usingnohup ./app.sh &i can not open reactor in browserapp,sh
#!/bin/bash WD="." if [ "$1" == "-C" ]; then WD=${2:-.} shift 2 fi WD=`realpath "${WD}"` cd $WD || exit 1 export NODE_PATH="${WD}:${NODE_PATH}" rm -f app.stop while [ ! -f app.stop ]; do node app.js $* >> logs/console.log 2>&1 [ $? -eq 127 ] && break; sleep 5 done exit 0is the : in line 11 the error?
-
I've had
app.shon my deprecation list for some time, so I don't use it or test with it. I may review that choice. -
Stay with what you've got. Clearly, we're not ready for
app.shto go away. I've improved the checks on NODE_PATH in the startup to prevent the error caused by the path separator and empty path, so the stock (unmodified)app.shshould work fine now. That change is in build 21297 just released. -
T toggledbits locked this topic on
