Build: latest-26221-b25bb3e3, Docker on Synology.
Hi, I have a Rule whose Trigger/Constraints reference other Rules via Rule State ... is TRUE. At some point it stops firing.
Expanding the rule's condition tree in the UI shows every Trigger and Constraint condition green/TRUE — confirmed live by walking into the room and watching Motion go true in real time. Rule History shows no new SET, just old reset entries.
Tried, on the same rule, same evening: recreating the trigger conditions with fresh IDs, recreating the constraint conditions with fresh IDs (flat and wrapped in a new Group — wrapping in a Group produced one SET, but it didn't reproduce on repeat attempts with the same structure), and finally a full container restart with a verified-correct saved rule. Still no SET, even with a fresh live motion event right after the restart.
Separately, I found that this rule (and its 10 per-room clones) share identical internal condition/group IDs with each other — leftover from a batch clone done months ago, never regenerated. Not sure if that's related, since fixing the IDs didn't reliably fix the symptom either.
Has anyone seen a Rule State condition show TRUE in the UI without the Rule ever producing a SET, surviving a clean restart?
Thanks in advance
Hey @toggledbits I'm back to trying to optimize a couple of things based on dynamic group.
First of all, I think I found a typo in the doc:
primary_attribute: "binary_sensor.state"
primary_attribute_value: |
d = false;
each id in members: d = getEntity(id)?.attributes?.power_switch?.state or d,
d
I think the correct code snippet is d = false,
All that said, my use case for dynamic groups is to group 3 different climate devices, so I could easily command them at the same time. Commands are good, but sometimes I want to check if any of the devices are on, and that's easily done with a similar snippet as the one you have in the docs. But this is limited to the primary attribute, while I want to have any of the attributes in the group to be driven by a similar logic (while all are null in the group). ie, access hvac_control.mode and see if any of the unit is set to cool, or heat. Is that possible, without re-defining an expression in each of my rules? Thanks!
Build 21228 has been released. Docker images available from DockerHub as usual, and bare-metal packages here.
Home Assistant up to version 2021.8.6 supported; the online version of the manual will now state the current supported versions;
Fix an error in OWMWeatherController that could cause it to stop updating;
Unify the approach to entity filtering on all hub interface classes (controllers); this works for device entities only; it may be extended to other entities later;
Improve error detail in messages for EzloController during auth phase;
Add isRuleSet() and isRuleEnabled() functions to expressions extensions;
Implement set action for lock and passage capabilities (makes them more easily scriptable in some cases);
Fix a place in the UI where 24-hour time was not being displayed.
As there are statements about compatibility for home assistant versions in MSR new version announcements (e.g. "HassController: Bless Hass to 2025.7.3"), I thought it would be good idea to track other controllers as well.
As an example, I can confirm that build "latest-25208-c53e8513" works with Hubitat Elevation C-8 platform version 2.4.2.134 using Maker API.
Updates: (the latest versions first in the list)
OK: build "latest-25264-2fbe9217" with Hubitat C-8 platform v. 2.4.3.123
Edit: Solved in latest-26221.
Bare-metal latest-26193
I have this group:
"OKforLarm":
name: OK för Larm
select:
- include_controller: vera
- include_capability: door_sensor
filter_expression: entity.attributes.door_sensor.state
It contains the entities I expect but behaves a bit odd. When I open vera>device_10097 the entity attribute door_sensor.state changes to true but it won't show up as member in the group, when I also open vera>device_10095 they both shows as members and when I close vera>device_10095 it disappear from the group but when I close vera>device_10097 it lingers in the group until I restart Reactor.
Hey @toggledbits
One thing that bothers me while doing work on new systems/new features, is that I cannot copy&paste actions, and I cannot drag&drop between set and resets.
#1 is for when I want to copy an action between different rules opened in two separate browser windows, while #2 is when I just need to flip a bunch of actions in the reset, or move some logic back and forth.
Both will be appreciated, but I understand the technical challenges. Thanks!
I'm currently on version 26011. I understand that the aarch64 image is no longer supported. So, I therefore need to update to the ARM64 image. Can anyone possibly suggest how I update my docker compose.yaml file (see below). Ideally I'd like to keep my existing reactions etc. rather than start from scratch.
# Multi-System Reactor template docker-compose.yml (version 22160)
#
# Change the lines indicated by "DO"...
#
services:
reactor:
container_name: reactor
environment:
# DO change the TZ: line to set your local time zone.
# See valid TZ list: https://en.wikipedia.org/wiki/List_of_tz_database_time_zones
TZ: GB
#
# DO NOT change this path. Your directory location is in "source" below.
REACTOR_DATA_PREFIX: /var/reactor
# DO change the image below to the one you are using (e.g. armv7l or aarch64 for RPi 4)
image: toggledbits/reactor:latest-aarch64
restart: "always"
expose:
- 8111
ports:
- 8111:8111
volumes:
# DO change the /home/username/reactor below to the directory you created for
# your local data; DO NOT change the /var/reactor part
- /home/pi/docker/reactor:/var/reactor
- /etc/localtime:/etc/localtime:ro
tmpfs: /tmp
[Dev] Inheritance in MQTT templates?
-
With debug level 5, that message will have another message that follows it to tell you what file originally defined it.
Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.
-
With debug level 5, that message will have another message that follows it to tell you what file originally defined it.
This?
[latest-24152]2024-06-06T19:29:35.079Z <MQTTController:5:MQTTController.js:941> MQTTController#mqtt loading template defs, considering zigbee2mqtt_tuya_door_sensor.yaml [latest-24152]2024-06-06T19:29:35.079Z <MQTTController:5:MQTTController.js:987> MQTTController#mqtt loading YAML template data from /home/homebridge/reactor/config/mqtt_templates/zigbee2mqt t_tuya_door_sensor.yaml [latest-24152]2024-06-06T19:29:35.080Z <MQTTController:WARN> MQTTController#mqtt file zigbee2mqtt_tuya_door_sensor.yaml in /home/homebridge/reactor/config/mqtt_templates/zigbee2mqtt_tuya_do or_sensor.yaml overrides existing template definition zigbee2mqtt_tuya_door_sensor [latest-24152]2024-06-06T19:29:35.080Z <MQTTController:5:MQTTController.js:918> MQTTController#mqtt previously defined in /home/homebridge/reactor/config/mqtt_templates/zigbee2mqtt_tuya_doo r_sensor.yaml/zigbee2mqtt_tuya_door_sensor.yaml -
Uh yes...
Digging in now...
-
I need the config for all of your
zigbee2mqtt-related entities. Just looking at the onesovrumsdorr, I'm not able to reproduce the problem. -
Yes, but just the entities that use the
zigbee2mqtttemplates. I don't need all of it. -
entities: "zigbee2mqtt_sensor": name: "Zigbee2MQTT" topic: "zigbee2mqtt" include: my_zigbee2mqtt_sensor "datarummet": name: "Datarummet" topic: "Datarummet" include: zigbee2mqtt_tradfri_light_bulb "sovrummet": name: "Sovrummet" topic: "Sovrummet" include: zigbee2mqtt_tradfri_light_bulb_ws "milia": name: "Milia" topic: "Milia" include: zigbee2mqtt_tradfri_light_bulb_ws "hallen1": name: "Hallen 1" topic: "Hallen 1" include: zigbee2mqtt_tradfri_light_bulb "hallen2": name: "Hallen 2" topic: "Hallen 2" include: zigbee2mqtt_tradfri_light_bulb "hallen3": name: "Hallen 3" topic: "Hallen 3" include: zigbee2mqtt_tradfri_light_bulb "fonster_koket": name: "Fönster köket" topic: "Fönster köket" include: zigbee2mqtt_tradfri_light_bulb_ws "soffan": name: "Soffan" topic: "Soffan" include: zigbee2mqtt_tradfri_light_bulb_ws "framsida": name: "Framsida" topic: "Framsida" include: zigbee2mqtt_tradfri_light_bulb "skank": name: "Skänk" topic: "Skänk" include: zigbee2mqtt_tradfri_light_bulb "baksida": name: "Baksida" topic: "Baksida" include: zigbee2mqtt_tradfri_light_bulb "lampa_spel": name: "Lampa spel" topic: "Lampa spel" include: zigbee2mqtt_tradfri_light_bulb "lampa_ella": name: "Lampa Ella" topic: "Ellas rum" include: zigbee2mqtt_tradfri_light_bulb "lampa_gym": name: "Lampa gym" topic: "Lampa gym" include: zigbee2mqtt_tradfri_light_bulb "lampa_tv": name: "Lampa TV" topic: "Lampa TV" include: zigbee2mqtt_tradfri_control_outlet "vitrinskap": name: "Vitrinskåp" topic: "Vitrinskåp" include: zigbee2mqtt_tradfri_control_outlet "klimat_sovrum": name: "Klimat sovrum" topic: "Klimat sovrum" include: zigbee2mqtt_aqara_sensor_temperature_humidity "klimat_kaminen": name: "Klimat kaminen" topic: "Klimat kaminen" include: zigbee2mqtt_aqara_sensor_temperature_humidity "klimat_dusch": name: "Klimat dusch" topic: "Klimat dusch" include: zigbee2mqtt_aqara_sensor_humidity_temperature "klimat_tvattstugan": name: "Klimat tvättstugan" topic: "Klimat tvättstugan" include: zigbee2mqtt_aqara_sensor_temperature_humidity "rorelse_hallen": name: "Rörelse hallen" topic: "Rörelse hallen" include: zigbee2mqtt_aqara_light_motion_sensor "rorelse_kallaren": name: "Rörelse källaren" topic: "Rörelse källaren" include: zigbee2mqtt_aqara_light_motion_sensor "rorelse_forradet": name: "Rörelse förrådet" topic: "Rörelse förrådet" include: zigbee2mqtt_tuya_motion_light_sensor "mini_switch_1": name: "Mini Switch källaren" topic: "Mini Switch källaren" include: zigbee2mqtt_aqara_mini_switch "jul_framsida": name: "Jul Framsida" topic: "Jul Framsida" include: zigbee2mqtt_tuya_smart_plug_pm "jul_koket": name: "Jul Köket" topic: "Jul Köket" include: zigbee2mqtt_tuya_smart_plug_pm "jul_sovrummet": name: "Jul Sovrummet" topic: "Jul Sovrummet" include: zigbee2mqtt_tuya_smart_plug_pm "jul_datarummet": name: "Jul Datarummet" topic: "Jul Datarummet" include: zigbee2mqtt_tuya_smart_plug_pm "element_gillestugan": name: "Element gillestugan" topic: "Element gillestugan" include: zigbee2mqtt_tuya_smart_plug_pm "vaxtbelysning_kallare": name: "Växtbelysning källare" topic: "Växtbelysning källare" include: zigbee2mqtt_tuya_smart_plug_pm "kompressor": name: "Kompressor" topic: "Kompressor" include: zigbee2mqtt_tuya_smart_plug_pm "luftrenare": name: "Luftrenare Sovrum" topic: "Luftrenare" include: zigbee2mqtt_tuya_smart_plug_pm "uttag_uterummet": name: "Uttag uterummet" topic: "Uttag uterummet" include: zigbee2mqtt_tuya_smart_plug_pm "sovrumsdorr": name: "Sovrumsdörr" topic: "Sovrumsdörr" include: zigbee2mqtt_tuya_door_sensor "entrebelysning": name: "Entrébelysning" topic: "Entrebelysning" include: zigbee2mqtt_tuya_light_bulb_rgbcw "lampa_uterummet": name: "Lampa uterummet" topic: "Lampa uterummet" include: zigbee2mqtt_tuya_light_bulb_rgbcwEDIT: unrelated, found entity id "jul_köket" and renamed it to "jul_koket" in post and Reactor.
-
OK. I also need the definitions for
zigbee2mqtt_tradfri_light_bulband all of the other templates not in thecommonfile you previously posted. -
Wait... are those just available on Github? Are your current versions published in any branch there? If so, I'll just grab them from there.
-
Looks like MQTTController 24159 solved it. I don't see any errors or warnings in the log after a restart, except all of these but I quess that's normal?
<MQTTController:WARN> MQTTController#mqtt file /home/homebridge/reactor/config/ext/MQTTController/templates/tasmota.yaml overrides existing template definition tasmota_generic_relay from /home/homebridge/reactor/config/ext/MQTTController/templates/tasmota.yaml -
No not normal, and I don't get those.
-
Are you running more than one instance of MQTTController?
-
OK. Try 24160
-
This post is deleted!
-
T toggledbits locked this topic on