Upgrade advice - upgrade from aarch64 to ARM64 image

[cw-kid]

x_vera_device.configured=true
x_vera_device.device_number=837
x_vera_device.device_type="urn:schemas-micasaverde-com:device:GenericIO:1"
x_vera_device.failed=null
x_vera_device.parent_device=1
x_vera_device.room_id="11"
x_vera_svc_micasaverde_com_HaDevice1.BatteryDate="1769544986"
x_vera_svc_micasaverde_com_HaDevice1.BatteryLevel="100"
x_vera_svc_micasaverde_com_HaDevice1.ChildrenSameRoom="1"
x_vera_svc_micasaverde_com_HaDevice1.Configured="1"
x_vera_svc_micasaverde_com_HaDevice1.EnableFlashControl="1"
x_vera_svc_micasaverde_com_HaDevice1.FirstConfigured="1769545001"
x_vera_svc_micasaverde_com_HaDevice1.LastUpdate="1769545001"
x_vera_svc_micasaverde_com_HaDevice1.ModeSetting="1:;2:A;3:;4:A"
x_vera_svc_micasaverde_com_HaDevice1.sl_Alarm="TAMPER_ALARM"
x_vera_svc_micasaverde_com_HaDevice1.sl_Alarm_updated=1769547652204
x_vera_svc_micasaverde_com_HaDevice1.sl_TamperAlarm="0"
x_vera_svc_micasaverde_com_HaDevice1.sl_TamperAlarm_updated=1769547682708
x_vera_svc_micasaverde_com_SecuritySensor1.Armed="0"
x_vera_svc_micasaverde_com_SecuritySensor1.ArmedTripped="0"
x_vera_svc_micasaverde_com_SecuritySensor1.IgnoreTripTime="2"
x_vera_svc_micasaverde_com_SecuritySensor1.LastTamper="1769547681"
x_vera_svc_micasaverde_com_SecuritySensor1.LastTrip="1769547681"
x_vera_svc_micasaverde_com_SecuritySensor1.Tripped="0"
x_vera_svc_micasaverde_com_ZWaveDevice1.AgiInfo="X"
x_vera_svc_micasaverde_com_ZWaveDevice1.AlarmType="0x7,"
x_vera_svc_micasaverde_com_ZWaveDevice1.AlarmVersion="0,1"
x_vera_svc_micasaverde_com_ZWaveDevice1.AssociationNum="5"
x_vera_svc_micasaverde_com_ZWaveDevice1.Capabilities="83,156,1,4,7,1,R,B,RS,|32S,34,48S:1,49:8,86,89,90S,94,112S,113S:5,114,115,122,128,132S:2,133S,134,142S,152,156S,"
x_vera_svc_micasaverde_com_ZWaveDevice1.ConfiguredAssoc=""
x_vera_svc_micasaverde_com_ZWaveDevice1.ConfiguredVariable="1-Motion detection sensitivity (8-255),1d,,6-Motion detection-alarm cancellation delay,2d,,24-Tamper operating modes (0-2),1d,,40-Illuminance report-threshold,2d,,42-Illuminance report-interval,2d,,60-Temperature report-threshold,2d,,62-Temperature measuring-interval,2d,,64-Temperature report-interval,2d,,66-Temperature offset,2d,"
x_vera_svc_micasaverde_com_ZWaveDevice1.ConfiguredWakeupInterval="7200"
x_vera_svc_micasaverde_com_ZWaveDevice1.FirmwareInfo="271,2065,12631"
x_vera_svc_micasaverde_com_ZWaveDevice1.LastReset="1769544953"
x_vera_svc_micasaverde_com_ZWaveDevice1.ManufacturerInfo="271,2049,4098"
x_vera_svc_micasaverde_com_ZWaveDevice1.NodeInfo="22,31,56,59,5e,72,73,7a,80,86,98,"
x_vera_svc_micasaverde_com_ZWaveDevice1.PlusInfo="1,6,0,12,7,12,7"
x_vera_svc_micasaverde_com_ZWaveDevice1.SecurityFailed="0"
x_vera_svc_micasaverde_com_ZWaveDevice1.SensorMlType="1,3,25"
x_vera_svc_micasaverde_com_ZWaveDevice1.SubscribedAlarms=",0x7,"
x_vera_svc_micasaverde_com_ZWaveDevice1.VariablesGet="1,15,6,30,24,0,40,200,42,3600,60,10,62,900,64,0,66,0,"
x_vera_svc_micasaverde_com_ZWaveDevice1.VariablesSet="1-Motion detection sensitivity (8-255),1d,,6-Motion detection-alarm cancellation delay,2d,,24-Tamper operating modes (0-2),1d,,40-Illuminance report-threshold,2d,,42-Illuminance report-interval,2d,,60-Temperature report-threshold,2d,,62-Temperature measuring-interval,2d,,64-Temperature report-interval,2d,,66-Temperature offset,2d,"
x_vera_svc_micasaverde_com_ZWaveDevice1.VersionInfo="3,4,24,3,3"
x_vera_svc_micasaverde_com_ZWaveDevice1.WakeupCapabilities="1,65535,7200,1"
x_vera_svc_micasaverde_com_ZWaveDevice1.WakeupInterval="7200"
zwave_device.capabilities="83,156,1,4,7,1,R,B,RS,|32S,34,48S:1,49:8,86,89,90S,94,112S,113S:5,114,115,122,128,132S:2,133S,134,142S,152,156S,"
zwave_device.failed=null
zwave_device.manufacturer_info="271,2049,4098"
zwave_device.node_id=162
zwave_device.version_info="3,4,24,3,3"

[toggledbits]

I would delete the entity (using the delete button in the entity detail display), and the restart Reactor and see if it re-creates the Reactor-defined capabilities and attributes.

If not, look at the reactor.log file and see if it logged any errors related to VeraController.

[cw-kid]

Well I've fixed the Trigger now. It was my fault I misunderstood what the popup was telling me. It was telling me it was gonna get rid of "is True" and blank that out, which is fine and as you said.

I thought it meant it was going to remove some other "Conditions" further down in the rule as I said.

Thanks

[cw-kid]

@toggledbits said in This trigger no longer working - complaining about the operator needing changing:

I would delete the entity (using the delete button in the entity detail display), and the restart Reactor and see if it re-creates the Reactor-defined capabilities and attributes.

OK let me see if I can do that. You mean pressing the X here ? And then adding it back in to the trigger right?

[toggledbits]

@cw-kid said in This trigger no longer working - complaining about the operator needing changing:

OK let me see if I can do that. You mean pressing the X here ? And then adding it back in to the trigger right?

No... Entities page... where you got the Copy Attributes output. There's a delete button there.

Delete the entity, then restart Reactor. It will come back, hopefully with binary_sensor capability.

[cw-kid]

OK Got it.

[cw-kid]

After Delete / Restart:

arming.state=false
battery_power.alert_level=0.5
battery_power.level=1
battery_power.since=1769544986000
binary_sensor.state=false
motion_sensor.state=false
x_vera_device.configured=true
x_vera_device.device_number=837
x_vera_device.device_type="urn:schemas-micasaverde-com:device:MotionSensor:1"
x_vera_device.failed=null
x_vera_device.parent_device=1
x_vera_svc_micasaverde_com_HaDevice1.BatteryDate="1769544986"
x_vera_svc_micasaverde_com_HaDevice1.BatteryLevel="100"
x_vera_svc_micasaverde_com_HaDevice1.ChildrenSameRoom="1"
x_vera_svc_micasaverde_com_HaDevice1.Configured="1"
x_vera_svc_micasaverde_com_HaDevice1.EnableFlashControl="1"
x_vera_svc_micasaverde_com_HaDevice1.FirstConfigured="1769545001"
x_vera_svc_micasaverde_com_HaDevice1.LastUpdate="1769545001"
x_vera_svc_micasaverde_com_HaDevice1.ModeSetting="1:;2:A;3:;4:A"
x_vera_svc_micasaverde_com_HaDevice1.sl_Alarm="TAMPER_ALARM"
x_vera_svc_micasaverde_com_HaDevice1.sl_TamperAlarm="0"
x_vera_svc_micasaverde_com_SecuritySensor1.Armed="0"
x_vera_svc_micasaverde_com_SecuritySensor1.ArmedTripped="0"
x_vera_svc_micasaverde_com_SecuritySensor1.IgnoreTripTime="2"
x_vera_svc_micasaverde_com_SecuritySensor1.LastTamper="1769547681"
x_vera_svc_micasaverde_com_SecuritySensor1.LastTrip="1769547681"
x_vera_svc_micasaverde_com_SecuritySensor1.Tripped="0"
x_vera_svc_micasaverde_com_ZWaveDevice1.AgiInfo="X"
x_vera_svc_micasaverde_com_ZWaveDevice1.AlarmType="0x7,"
x_vera_svc_micasaverde_com_ZWaveDevice1.AlarmVersion="0,1"
x_vera_svc_micasaverde_com_ZWaveDevice1.AssociationNum="5"
x_vera_svc_micasaverde_com_ZWaveDevice1.Capabilities="83,156,1,4,7,1,R,B,RS,|32S,34,48S:1,49:8,86,89,90S,94,112S,113S:5,114,115,122,128,132S:2,133S,134,142S,152,156S,"
x_vera_svc_micasaverde_com_ZWaveDevice1.ConfiguredAssoc=""
x_vera_svc_micasaverde_com_ZWaveDevice1.ConfiguredVariable="1-Motion detection sensitivity (8-255),1d,,6-Motion detection-alarm cancellation delay,2d,,24-Tamper operating modes (0-2),1d,,40-Illuminance report-threshold,2d,,42-Illuminance report-interval,2d,,60-Temperature report-threshold,2d,,62-Temperature measuring-interval,2d,,64-Temperature report-interval,2d,,66-Temperature offset,2d,"
x_vera_svc_micasaverde_com_ZWaveDevice1.ConfiguredWakeupInterval="7200"
x_vera_svc_micasaverde_com_ZWaveDevice1.FirmwareInfo="271,2065,12631"
x_vera_svc_micasaverde_com_ZWaveDevice1.LastReset="1769544953"
x_vera_svc_micasaverde_com_ZWaveDevice1.ManufacturerInfo="271,2049,4098"
x_vera_svc_micasaverde_com_ZWaveDevice1.NodeInfo="22,31,56,59,5e,72,73,7a,80,86,98,"
x_vera_svc_micasaverde_com_ZWaveDevice1.PlusInfo="1,6,0,12,7,12,7"
x_vera_svc_micasaverde_com_ZWaveDevice1.SecurityFailed="0"
x_vera_svc_micasaverde_com_ZWaveDevice1.SensorMlType="1,3,25"
x_vera_svc_micasaverde_com_ZWaveDevice1.SubscribedAlarms=",0x7,"
x_vera_svc_micasaverde_com_ZWaveDevice1.VariablesGet="1,15,6,30,24,0,40,200,42,3600,60,10,62,900,64,0,66,0,"
x_vera_svc_micasaverde_com_ZWaveDevice1.VariablesSet="1-Motion detection sensitivity (8-255),1d,,6-Motion detection-alarm cancellation delay,2d,,24-Tamper operating modes (0-2),1d,,40-Illuminance report-threshold,2d,,42-Illuminance report-interval,2d,,60-Temperature report-threshold,2d,,62-Temperature measuring-interval,2d,,64-Temperature report-interval,2d,,66-Temperature offset,2d,"
x_vera_svc_micasaverde_com_ZWaveDevice1.VersionInfo="3,4,24,3,3"
x_vera_svc_micasaverde_com_ZWaveDevice1.WakeupCapabilities="1,65535,7200,1"
x_vera_svc_micasaverde_com_ZWaveDevice1.WakeupInterval="7200"
zwave_device.capabilities="83,156,1,4,7,1,R,B,RS,|32S,34,48S:1,49:8,86,89,90S,94,112S,113S:5,114,115,122,128,132S:2,133S,134,142S,152,156S,"
zwave_device.failed=null
zwave_device.manufacturer_info="271,2049,4098"
zwave_device.node_id=162
zwave_device.version_info="3,4,24,3,3"

[cw-kid]

They are back in the menu now!

But it seems all the Vera devices and rules I have looked at today none of them had Reactor defined capability / attributes. I will have to check some more rules / devices to see what is happening?

[toggledbits]

OK. That's easy to address.

1. Stop Reactor
2. Delete the entire storage/entities subdirectory (no others, just that one)
3. Restart Reactor

This will force all Controller-based entities to be rebuilt, like the motion sensor was, just in bulk.

[cw-kid]

OK I might have to do it on bulk then as you say.

I've been looking at some old rules that I have not touched or done anything with or messed with those devices at all, those rules seem fine and still have the binary_sensor.state attribute etc.

But I am sure for "new" devices I have paired back to the Vera hub today and then had to correct / edit those rules or create new rules, them ones only showed me the extended attributes only in that menu.

These are some other "new" devices paired / added today to the Vera hub and their rules / triggers.

1. This is the Site Sensor plugin new today on Vera, it only has extended attributes (Maybe expected for that as its a virtual device?)

2. Another motion sensor I paired today a Hank one. That also has no Reactor defined Capability / Attribute, there was only extended attributes available in the menu.

3. This one did work, a Hank door sensor, I paired yesterday, that one does have binary_sensor.state.

So it seems hit or miss if the new devices get them or not.

I will double check what happens? When I paired more new devices soon.

Thanks.

[toggledbits]

Don't forget to hard refresh your browser as well.