Skip to content
  • Categories
  • Recent
  • Tags
  • Popular
  • Unsolved
Collapse
Discussion Forum to share and further the development of home control and automation, independent of platforms.
  1. Home
  2. Software
  3. Multi-System Reactor
  4. Replacing SiteSensor Plugin (Vera) with MSR
Advice reqeusted to migrate MSR from Bare Metal to Container
T
Good day all, I'm in the process of trying to shut down my 10 year old Linux home server that served many purposes, but primarily it's what I used for my NAS/Plex Media server. I migrated the NAS aspect of the server in November of last year to a true NAS solution (Ubiquti UNAS Pro), which is rack mount and much more efficient than my old tower, which it's only side benefit was heating my home office during the winter. Unfortunately it also means heating my home office during the summer, which were about to be in full swing. I have two things running on this 10 year old server at this point. MSR and pi-hole. I'm running Plex Media Server on Fedora Workstation in Podman on mini PC, which is much more energy efficient than my old tower. My next step is to migrate MSR. I know there are images of MSR out there, and creating it is well documented. I'm going to be using Podman instead of Docker for various reasons, but they work very similar. What I don't know, is what I need to do to migrate my existing Bare Metal installation over to a container. Has anyone done this? Any advice?
Multi-System Reactor
Reactor (Multi-System/Multi-Hub) Announcements
toggledbitsT
Build 21228 has been released. Docker images available from DockerHub as usual, and bare-metal packages here. Home Assistant up to version 2021.8.6 supported; the online version of the manual will now state the current supported versions; Fix an error in OWMWeatherController that could cause it to stop updating; Unify the approach to entity filtering on all hub interface classes (controllers); this works for device entities only; it may be extended to other entities later; Improve error detail in messages for EzloController during auth phase; Add isRuleSet() and isRuleEnabled() functions to expressions extensions; Implement set action for lock and passage capabilities (makes them more easily scriptable in some cases); Fix a place in the UI where 24-hour time was not being displayed.
Multi-System Reactor
Can´t restart or upgrade/deploy MSR
F
Topic thumbnail image
Multi-System Reactor
[Solved] Limit HA Entity in MSR
wmarcolinW
Topic thumbnail image
Multi-System Reactor
Organizing/ structuring rule sets and rules
R
Hi guys, Just wondering how you guys organize your rule sets and rules. I wish I had an extra layer to have some more granularity, but my feature request was not popular. Maybe there are better ways to organize my rule sets. I use the rule sets now primarily for rooms. So a rule set per room. But maybe grouping by functionality works better. Any examples/ suggestions would be appreciated.
Multi-System Reactor
Moving MSR from a QNAP container to RP 5 - some issues
Tom_DT
Topic thumbnail image
Multi-System Reactor
Widget deletion does not work and landing page (status) is empy
M
Topic thumbnail image
Multi-System Reactor
Need help reducing false positive notifications
T
Topic thumbnail image
Multi-System Reactor
Deleting widgets
tunnusT
Hopefully a trivial question, but how do you delete widgets in a status page? Using build 22266
Multi-System Reactor
MQTT configuration question
tunnusT
I have the following yaml configuration in local_mqtt_devices file x_mqtt_device: set_speed: arguments: speed: type: str topic: "command/%friendly_name%" payload: type: json expr: '{ "fan": parameters.speed }' While this works fine, I'm wondering how this could be changed to "fixed" parameters, as in this case "fan" only accepts "A", "Q" or a numeric value of 1-5?
Multi-System Reactor
System Configuration Check - time is offset
F
Hi! I get this message when I'm on the status tab: System Configuration Check The time on this system and on the Reactor host are significantly different. This may be due to incorrect system configuration on either or both. Please check the configuration of both systems. The host reports 2025-04-01T15:29:29.252Z; browser reports 2025-04-01T15:29:40.528Z; difference 11.276 seconds. I have MSR installed as a docker on my Home Assistant Blue / Hardkernel ODROID-N2/N2+. MSR version is latest-25082-3c348de6. HA versions are: Core 2025.3.4 Supervisor 2025.03.4 Operating System 15.1 I have restarted HA as well as MSR multiple times. This message didn´t show two weeks ago. Don´t know if it have anything to do with the latest MSR version. Do anyone know what I can try? Thanks in advance! Let's Be Careful Out There (Hill Street reference...) /Fanan
Multi-System Reactor
Programmatically capture HTTP Request action status code or error
therealdbT
I have a very strange situation, where if InfluxDB restarts, other containers may fail when restarting at the same time (under not easy to understand circumstances), and InfluxDB remains unreachable (and these containers crashes). I need to reboot these containers in an exact order, after rebooting InfluxDB. While I understand what's going on, I need a way to reliable determine that InfluxDB is not reachable and these containers are not reachable, in order to identify this situation and manually check what's going on - and, maybe, in the future, automatically restart them if needed. So, I was looking at HTTP Request action, but I need to capture the HTTP response code, instead of the response (becase if ping is OK, InfluxDB will reply with a 204), and, potentially, a way to programmatically detect that it's failing to get the response. While I could write a custom HTTP controller for this or a custom HTTP virtual device, I was wondering if this is somewhat on you roadmap @toggledbits Thanks!
Multi-System Reactor
ZwaveJSUI - RGBWW BULB - Warm/Cold White interfered with RGB settings - Bulb doesn't change color if in WarmWhite state.
N
Hi , I'm on -Reactor (Multi-hub) latest-25067-62e21a2d -Docker on Synology NAS -ZWaveJSUI 9.31.0.6c80945 Problem with ZwaveJSUI: When I try to change color to a bulb RGBWW, it doesn't change to the RGB color and the bulb remains warm or cold white. I tryed with Zipato RGBW Bulb V2 RGBWE2, Hank Bulb HKZW-RGB01, Aentec 6 A-ZWA002, so seems that it happens with all RGBWW bulb with reactor/zwavejsui. I'm using from reator the entity action: "rgb_color.set" and "rgb_color.set_rgb". After I send the reactor command, It changes in zwavejsui the rgb settings but doesn't put the white channel to "0", so the prevalent channel remains warm/cold White and the bulb doesn't change into the rgb color. This is the status of the bulb in zwavejsui after "rgb_color.set" (235,33,33,) and the bulb is still warmWhite. x_zwave_values.Color_Switch_currentColor={"warmWhite":204,"coldWhite":0,"red":235,"green":33,"blue":33} The "cold white" and "warm white" settings interfer with the rgb color settings. Reactor can change bulb colors with rgb_color set — (value, ui8, 0x000000 to 0xffffff) or rgb_color set_rgb — (red, green, blue, all ui1, 0 to 255) but if warm or cold white are not to "0", zwavejsui doesn't change them and I can't find a way to change into rgb or from rgb back to warm white. So if I use from reactor: rgb_color set_rgb — (235,33,33) in zwavejsui I have x_zwave_values.Color_Switch_targetColor={"red":235,"green":33,"blue":33} 14/03/2025, 16:43:57 - value updated Arg 0: └─commandClassName: Color Switch └─commandClass: 51 └─property: targetColor └─endpoint: 0 └─newValue └──red: 235 └──green: 33 └──blue: 33 └─prevValue └──red: 235 └──green: 33 └──blue: 33 └─propertyName: targetColor 14/03/2025, 16:43:57 - value updated Arg 0: └─commandClassName: Color Switch └─commandClass: 51 └─property: currentColor └─endpoint: 0 └─newValue └──warmWhite: 204 └──coldWhite: 0 └──red: 235 └──green: 33 └──blue: 33 └─prevValue └──warmWhite: 204 └──coldWhite: 0 └──red: 235 └──green: 33 └──blue: 33 └─propertyName: currentColor In zwavejsui, the bulb changes rgb set but warm White remains to "204" and the bulb remais on warm White channel bacause is prevalent on rgb set. x_zwave_values.Color_Switch_currentColor_0=204 x_zwave_values.Color_Switch_currentColor_1=0 x_zwave_values.Color_Switch_currentColor_2=235 x_zwave_values.Color_Switch_currentColor_3=33 x_zwave_values.Color_Switch_currentColor_4=33 Is it possible to targetColor also for "warmWhite" and "coldWhite" and have something similar to this? x_zwave_values.Color_Switch_targetColor={"warmWhite":0,"coldWhite":0,"red":235,"green":33,"blue":33} Thanks in advance.
Multi-System Reactor
Problem with simultaneous notifications.
T
Topic thumbnail image
Multi-System Reactor
Problem after upgrading to 25067
R
MSR had been running fine, but I decided to follow the message to upgrade to 25067. Since the upgrade, I have received the message "Controller "<name>" (HubitatController hubitat2) could not be loaded at startup. Its ID is not unique." MSR throws the message on every restart. Has anyone else encountered this problem? I am running MSR on a Raspberry Pi4 connecting to two Hubitat units over an OpenVPN tunnel. One C8 and a C8 Pro. Both are up-to-date. It appears that despite the error message that MSR may be operating properly.
Multi-System Reactor
Global expressions not always evaluated
tunnusT
Topic thumbnail image
Multi-System Reactor
[Solved] Local expression evaluation
V
Topic thumbnail image
Multi-System Reactor
[Solved] Runtime error when exiting global reaction that contains a group
S
I am getting a Runtime error on different browsers when I click exit when editing an existing or creating a new global reaction containing a group. If the global reaction does not have a group I don't get an error. I see a similar post on the forum about a Runtime Error when creating reactions but started a new thread as that appears to be solved. The Runtime Error is different in the two browsers Safari v18.3 @http://192.168.10.21:8111/reactor/en-US/lib/js/reaction-list.js:171:44 You may report this error, but do not screen shot it. Copy-paste the complete text. Remember to include a description of the operation you were performing in as much detail as possible. Report using the Reactor Bug Tracker (in your left navigation) or at the SmartHome Community. Google Chrome 133.0.6943.142 TypeError: self.editor.isModified is not a function at HTMLButtonElement.<anonymous> (http://192.168.10.21:8111/reactor/en-US/lib/js/reaction-list.js:171:34) You may report this error, but do not screen shot it. Copy-paste the complete text. Remember to include a description of the operation you were performing in as much detail as possible. Report using the Reactor Bug Tracker (in your left navigation) or at the SmartHome Community. Steps to reproduce: Click the pencil to edit a global reaction with a group. Click the Exit button. Runtime error appears. or Click Create Reaction Click Add Action Select Group Add Condition such as Entity Attribute. Add an Action. Click Save Click Exit Runtime error appears. I don’t know how long the error has been there as I haven’t edited the global reaction in a long time. Reactor (Multi-hub) latest-25060-f32eaa46 Docker Mac OS: 15.3.1 Thanks
Multi-System Reactor
Cannot delete Global Expressions
SnowmanS
I am trying to delete a global expression (gLightDelay) but for some strange reason, it comes back despite clicking the Delete this expression and Save Changes buttons. I have not created a global expression for some times and just noticed this while doing some clean-up. I have upgraded Reactor to 25067 from 25060 and the behaviour is still there. I have restarted Reactor (as well as restarting its container) and cleared the browser's cache several times without success. Here's what the log shows. [latest-25067]2025-03-08T23:50:22.690Z <wsapi:INFO> [WSAPI]wsapi#1 rpc_echo [Object]{ "comment": "UI activity" } [latest-25067]2025-03-08T23:50:26.254Z <GlobalExpression:NOTICE> Deleting global expression gLightDelay [latest-25067]2025-03-08T23:50:27.887Z <wsapi:INFO> [WSAPI]wsapi#1 rpc_echo [Object]{ "comment": "UI activity" } Reactor latest-25067-62e21a2d Docker on Synology NAS
Multi-System Reactor
Local notification methods?
CatmanV2C
Morning, experts. Hard on learning about the internet check script in MSR tools, I was wondering what suggestions anyone has about a local (i.e. non-internet dependent) notification method. This was prompted by yesterday's fun and games with my ISP. I've got the script Cronned and working properly but short of flashing a light on and off, I'm struggling to think of a way of alerting me (ideally to my phone) I guess I could set up a Discord server at home, but that feels like overkill for a rare occasion. Any other suggestions? TIA C
Multi-System Reactor

Replacing SiteSensor Plugin (Vera) with MSR

Scheduled Pinned Locked Moved Multi-System Reactor
91 Posts 7 Posters 12.5k Views 6 Watching
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • toggledbitsT Offline
    toggledbitsT Offline
    toggledbits
    wrote on last edited by
    #17

    OK. Looks like all is good, OWM is just returning an odd place name (who knows what data they sourced that from), and since you are using "default" configuration (home location from Reactor main config), it's using OWM's returned name for the entity name. If you do a custom location in the OWM config, you can set the name by adding the "name" to the custom config. I'm going to extend that behavior to the default location config as well, and that will be in today's build. If you want to get it fixed before that, just add a location to your OWMController config section:

      - id: weather
        enabled: true
        implementation: OWMWeatherController
        name: OWM Weather
        config:
          appid: "yourappidhere"
          locations:
            - id: home
              name: "My Custom Place Name"
              latitude: nn.nnnnnn
              longitude: nn.nnnnnn
    

    Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

    G 1 Reply Last reply
    2
    • toggledbitsT toggledbits

      OK. Looks like all is good, OWM is just returning an odd place name (who knows what data they sourced that from), and since you are using "default" configuration (home location from Reactor main config), it's using OWM's returned name for the entity name. If you do a custom location in the OWM config, you can set the name by adding the "name" to the custom config. I'm going to extend that behavior to the default location config as well, and that will be in today's build. If you want to get it fixed before that, just add a location to your OWMController config section:

        - id: weather
          enabled: true
          implementation: OWMWeatherController
          name: OWM Weather
          config:
            appid: "yourappidhere"
            locations:
              - id: home
                name: "My Custom Place Name"
                latitude: nn.nnnnnn
                longitude: nn.nnnnnn
      
      G Offline
      G Offline
      gwp1
      wrote on last edited by
      #18

      @toggledbits I'm a few nightly builds behind so I'll wait until you have tonight's out. Thanks!

      *Hubitat C-7 2.4.1.151
      *Proxmox VE v8, Beelink MiniPC 12GBs, SSD

      *HASS 2025.3.4
      w/ ZST10-700 fw 7.18.3

      *Prod MSR in docker/portainer
      MSR: latest-25082-3c348de6
      MQTTController: 24257
      ZWave Controller: 25082

      1 Reply Last reply
      0
      • LibraSunL LibraSun

        For MSR users with SiteSensor still installed back on Vera, you might want to consider letting MSR take over those duties. Here's a quick run-down of how I imported one of my SiteSensor recipes into a Rule on MSR, using OpenWeather API* as an example.

        STEP 1: Copy the Basics from Vera
        (a) Go to your Vera > Devices, locate SiteSensor (the main instance, not one of its children devices) and click ► for details then click SETTINGS.
        (b) Copy and paste (into Notepad or other text editor) the Request URL along with each of the defined expressions.

        STEP 2: Create a Rule on MSR
        (c) Jump into Rule Sets and click "Create Rule". Click its title to rename the rule 'OpenWeather (API)" and click 'Rename'.
        (d) Decide on appropriate Triggers (in my case, it's an OR group that includes an [INTERVAL] set to "Every 3 hours" plus a few [ENTITY ATTRIBUTE] entries reacting to things like entering/leaving home, waking up, etc.).
        (e) In Set Reacion, create an [HTTP REQUEST] > [GET] action.
        (f) Paste your old "Request URL" into the "Request URL" box.

        FYI GET calls to OpenWeather API* take the form:

        http://api.openweathermap.org/data/2.5/weather?zip=<your_ZIP_code>&id=<your_Wx_ID>&appid=<app-id>&units=imperial
        

        (g) Create four new blank Expressions (name them openWx, Tx, Hx and Rx).
        (h) Click SAVE & EXIT

        STEP 3: Process the Response
        (i) Re-open rule "OpenWeather (API)" by clicking the 'Edit' icon.
        (j) Within the [HTTP REQUEST] action, assign "Capture response to:" ► openWx
        (k) Down in Expressions, click "[+]Add Expresssion" then enter the following:
        Tx := round(openWx.main.temp,1)
        // yields current outdoor temperature
        Hx := round(openWx.main.humidity)
        // yields current humidity conditions
        Rx := openWx.rain ? ( openWx.rain['3h'] ? openWx.rain['3h'] : 0) : 0
        // yields predicted rainfall, if present; otherwise 0
        (l) Click SAVE & EXIT. Enjoy!

        Naturally, your specific needs and workflow will differ from the one I've outlined here. For instance, you may wish to explore the contents of the JSON object in openWx for additional data of interest to you, and define variables to match.

        My goal here has been to illustrate some key concepts needed for moving from SiteSensor over to MSR:

        • Some syntax is the same, such as dot notation for object.item.access;
        • Other syntax has changed, such as the use of ternary A ? B : C in place of IF (A, B, C);
        • Manually setting an [INTERVAL] in lieu of SiteSensor's timed schedule;

        Pro tip: If your workflow demands that other Rules react to the output of the "OpenWeather (API)" rule, then be sure to create all of the aforementioned Expressions under "Global Expressions" instead, so they become accessible across all Rule Sets.

        Once the transition is complete, you can either DISARM SiteSensor on Vera or remove it entirely with "Remove Device" (which will automatically remove all of its child devices).

        *Additional reading:
        OpenWeather API : https://openweathermap.org/api
        FREE SUBSCRIPTION REQUIRED TO USE THIS SERVICE

        PRO TIP: See below for optimal way to incorporate OpenWeatherMap into your MSR workflow(s), by enabling the service directly in the reactor.yaml config file.

        cw-kidC Offline
        cw-kidC Offline
        cw-kid
        wrote on last edited by
        #19

        @librasun said in Replacing SiteSensor Plugin (Vera) with MSR:

        My goal here has been to illustrate some key concepts needed for moving from SiteSensor over to MSR

        I never used SiteSensor plugin for Vera before.

        Thanks for the MSR example you wrote.

        I wanted to try this out and found this Covid-19 API here.

        However the http command they give doesn't seem to return any results data, either just in the web browser or in my MSR rule.

        https://covid19-api.com/country?name=UK&format=json
        

        52885b5e-6ae2-4454-8650-a2fb4b55eb4c-image.png

        The curl command does work OK however

        curl -X GET "https://covid19-api.com/country?name=UK&format=json" -H "accept: application/json"
        

        How do I specify the application/json in the MSR rule? Assuming the problem is related to that.

        1 Reply Last reply
        0
        • toggledbitsT Offline
          toggledbitsT Offline
          toggledbits
          wrote on last edited by
          #20

          Same way. One header per line in that field.

          Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

          cw-kidC 1 Reply Last reply
          0
          • toggledbitsT toggledbits

            Same way. One header per line in that field.

            cw-kidC Offline
            cw-kidC Offline
            cw-kid
            wrote on last edited by cw-kid
            #21

            @toggledbits

            In the "Request Headers" field in the "Set Reaction" I have tried the following:

            Accept: application/json

            and tried:

            Content-Type: application/json

            It allows me to save the rule but when I go back in to the rule that field is empty again and its not collecting the response data in to my empty expression / variable.

            1 Reply Last reply
            0
            • toggledbitsT Offline
              toggledbitsT Offline
              toggledbits
              wrote on last edited by
              #22

              So there are two separate issues here:

              1. First, we need to figure out if the UI is correctly storing the headers or not, and if the problem is merely that it is not restoring/displaying them correctly when you go back into the editor. The check for that is to go into the reaction, add the headers, and save. Then, open the rule status view and it will show you the rule ID underneath the rule condition status and expressions. Go to your reactor/storage/rules directory, and grab the same-named file (with .json suffix) and post it here. Let's see what's being stored.

              2. Look at the logs to see where the reaction is running and what the request is doing. There may be errors logged.

              It's entirely possible that the problem is 1, 2, or even both.

              Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

              1 Reply Last reply
              0
              • cw-kidC Offline
                cw-kidC Offline
                cw-kid
                wrote on last edited by cw-kid
                #23

                @toggledbits

                I cannot upload files to this forum it seems.

                I have uploaded the rule to my One Drive here

                1 Reply Last reply
                0
                • toggledbitsT Offline
                  toggledbitsT Offline
                  toggledbits
                  wrote on last edited by
                  #24

                  OK. There's definitely two broken things in the handling of headers, so go ahead and open a PR for this. No need to post the rule there (again); I've got it and have the issue in hand, but unfortunately, it's not just a UI issue.

                  Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                  1 Reply Last reply
                  1
                  • cw-kidC Offline
                    cw-kidC Offline
                    cw-kid
                    wrote on last edited by
                    #25

                    OK done

                    https://reactor.toggledbits.com/mantisbt/view.php?id=147

                    Thanks

                    1 Reply Last reply
                    2
                    • cw-kidC Offline
                      cw-kidC Offline
                      cw-kid
                      wrote on last edited by cw-kid
                      #26

                      OK so lets say I now have a variable in MSR that contains some data pulled down from a HTTP Request to some online API somewhere.

                      How can I send that value / information to a Generic IO Sensor in Vera ?

                      I know how to create a GenericIO device in Vera and I know how to send data to it from a simple HTTP command, for example this command will send the text "Hello World"

                      http://Vera-IP/port_3480/data_request?id=lu_variableset&DeviceNum=128&serviceId=urn:micasaverde-com:serviceId:GenericSensor1&Variable=CurrentLevel&Value=Hello World
                      

                      And here is the device in Vera:

                      51473251-7dd4-436a-b70a-02add45a940f-image.png

                      But how to create a rule to send the contents of an MSR variable (expression) ?

                      LibraSunL 1 Reply Last reply
                      0
                      • LibraSunL Offline
                        LibraSunL Offline
                        LibraSun
                        wrote on last edited by LibraSun
                        #27

                        I'm going to assume the data was returned in JSON format? In which case MSR treats that like an object {}, whose keys can be referenced with dot notation.
                        For example, if your variable respData stored the response {animal:"cat", clothing:"suit", food:"chow"} and you want to send the current value of the "chow" key therein, simply reference that value with respData.chow.

                        One hurdle you may have to overcome, since the data is being fetched and stored in Rule A, but you want to reference the results in Rule B, is that you'd then have to either (a) store respData as a Global Expression, or (b) create a blank Expression in Rule B, and tell Rule A to [Set Variable] on it.

                        1 Reply Last reply
                        0
                        • cw-kidC cw-kid

                          OK so lets say I now have a variable in MSR that contains some data pulled down from a HTTP Request to some online API somewhere.

                          How can I send that value / information to a Generic IO Sensor in Vera ?

                          I know how to create a GenericIO device in Vera and I know how to send data to it from a simple HTTP command, for example this command will send the text "Hello World"

                          http://Vera-IP/port_3480/data_request?id=lu_variableset&DeviceNum=128&serviceId=urn:micasaverde-com:serviceId:GenericSensor1&Variable=CurrentLevel&Value=Hello World
                          

                          And here is the device in Vera:

                          51473251-7dd4-436a-b70a-02add45a940f-image.png

                          But how to create a rule to send the contents of an MSR variable (expression) ?

                          LibraSunL Offline
                          LibraSunL Offline
                          LibraSun
                          wrote on last edited by
                          #28

                          @cw-kid said in Replacing SiteSensor Plugin (Vera) with MSR:

                          But how to create a rule to send the contents of an MSR variable (expression) ?

                          In case you revised your question, or I misinterpreted it earlier, here goes:

                          It sounds like you want to send data from MSR to a plug-in / virtual device / sensor over on Vera. Before you begin, go to that "device" > Advanced > Variables and determine which of its variables is intended to receive the data.

                          Click "EDIT" next to that variable, and look for its complete "service" name in the window; copy that string for use back in MSR.

                          Close that window on Vera, then head back over to MSR.

                          In MSR, you will want an [ENTITY ACTION] in the Set Reaction. Choose the target device as the 'Entity' and choose "x_vera_device.set_variable" as the action.

                          Fill out the three fields, where "service:" and "variable:" come from the string you copied earlier. For "value:" either type a constant (numeric or "text"), or a variable name properly clad in curly brackets ( e.g. ${{respData}} ) so the value gets substituted next time the Rule triggers.

                          Hope this helps!!

                          1 Reply Last reply
                          1
                          • cw-kidC Offline
                            cw-kidC Offline
                            cw-kid
                            wrote on last edited by
                            #29

                            @LibraSun

                            That's great thanks I think you just answered my question, think I know what to do now, I will give it a try.

                            1 Reply Last reply
                            0
                            • cw-kidC Offline
                              cw-kidC Offline
                              cw-kid
                              wrote on last edited by
                              #30

                              @LibraSun

                              Its working. I now have my current WAN IP address being sent from MSR to a virtual device (Generic IO Sensor) on Vera.

                              So now know how to send any data stored in an expression / variable from MSR to a device on Vera !

                              1 Reply Last reply
                              2
                              • cw-kidC Offline
                                cw-kidC Offline
                                cw-kid
                                wrote on last edited by
                                #31

                                Just updated to today's build, the headers are now saved in that field and no longer vanish.

                                However I've tried this and no data is being returned / stored

                                f949e889-5d2e-4033-8ae4-505292b35797-image.png

                                toggledbitsT 1 Reply Last reply
                                0
                                • LibraSunL Offline
                                  LibraSunL Offline
                                  LibraSun
                                  wrote on last edited by LibraSun
                                  #32

                                  Try lowercase "uk" the way they show in the API docs, perhaps?

                                  covid19-api.com
                                  accept: application/json

                                  Response should be in the form:

                                  [
                                    {
                                      "country": "UK",
                                      "code": "GB",
                                      "confirmed": 4319128,
                                      "recovered": 3748042,
                                      "critical": 683,
                                      "deaths": 126445,
                                      "latitude": 55.378051,
                                      "longitude": -3.435973,
                                      "lastChange": "2021-03-25T18:23:06+01:00",
                                      "lastUpdate": "2021-03-26T14:15:03+01:00"
                                    }
                                  ]
                                  
                                  cw-kidC 1 Reply Last reply
                                  0
                                  • LibraSunL LibraSun

                                    Try lowercase "uk" the way they show in the API docs, perhaps?

                                    covid19-api.com
                                    accept: application/json

                                    Response should be in the form:

                                    [
                                      {
                                        "country": "UK",
                                        "code": "GB",
                                        "confirmed": 4319128,
                                        "recovered": 3748042,
                                        "critical": 683,
                                        "deaths": 126445,
                                        "latitude": 55.378051,
                                        "longitude": -3.435973,
                                        "lastChange": "2021-03-25T18:23:06+01:00",
                                        "lastUpdate": "2021-03-26T14:15:03+01:00"
                                      }
                                    ]
                                    
                                    cw-kidC Offline
                                    cw-kidC Offline
                                    cw-kid
                                    wrote on last edited by
                                    #33

                                    @librasun

                                    Doesn't make any difference with lowercase "uk"

                                    My expression in the rule says "null" and no data is being brought down.

                                    da457671-899c-4163-97c8-480a49f1dc87-image.png

                                    LibraSunL 1 Reply Last reply
                                    0
                                    • cw-kidC Offline
                                      cw-kidC Offline
                                      cw-kid
                                      wrote on last edited by cw-kid
                                      #34

                                      Not a coder, but have been messing about with Vera's Generic IO Sensor device and managed to create a new instance that can accept multiple variables.

                                      9f7d893e-c4e5-4bda-a6e2-2fb31ef61b0e-image.png

                                      So if these HTTP request headers start working, I should be able to push some Covid stats to this "Generic Sensor" in Vera as a test.

                                      Does something like this kind of device for displaying data already exist somewhere?

                                      LibraSunL 1 Reply Last reply
                                      0
                                      • cw-kidC cw-kid

                                        Not a coder, but have been messing about with Vera's Generic IO Sensor device and managed to create a new instance that can accept multiple variables.

                                        9f7d893e-c4e5-4bda-a6e2-2fb31ef61b0e-image.png

                                        So if these HTTP request headers start working, I should be able to push some Covid stats to this "Generic Sensor" in Vera as a test.

                                        Does something like this kind of device for displaying data already exist somewhere?

                                        LibraSunL Offline
                                        LibraSunL Offline
                                        LibraSun
                                        wrote on last edited by
                                        #35

                                        @cw-kid said in Replacing SiteSensor Plugin (Vera) with MSR:

                                        Does something like this kind of device for displaying data already exist somewhere?

                                        Yes, the SiteSensor plug-in ( also by @toggledbits ) for Vera.

                                        cw-kidC 1 Reply Last reply
                                        0
                                        • cw-kidC cw-kid

                                          @librasun

                                          Doesn't make any difference with lowercase "uk"

                                          My expression in the rule says "null" and no data is being brought down.

                                          da457671-899c-4163-97c8-480a49f1dc87-image.png

                                          LibraSunL Offline
                                          LibraSunL Offline
                                          LibraSun
                                          wrote on last edited by
                                          #36

                                          @cw-kid said in Replacing SiteSensor Plugin (Vera) with MSR:

                                          My expression in the rule says "null" and no data is being brought down.

                                          If it's any consolation, their site seems to be throwing a 500 error when I try to visit https://covid19-api.com/country?name=uk&format=json in my browser. How about yours?

                                          cw-kidC 1 Reply Last reply
                                          0
                                          Reply
                                          • Reply as topic
                                          Log in to reply
                                          • Oldest to Newest
                                          • Newest to Oldest
                                          • Most Votes


                                          Recent Topics

                                          • Advice reqeusted to migrate MSR from Bare Metal to Container
                                            T
                                            tamorgen
                                            0
                                            5
                                            65

                                          • Reactor (Multi-System/Multi-Hub) Announcements
                                            toggledbitsT
                                            toggledbits
                                            5
                                            122
                                            37.0k

                                          • Z-Wave Future....
                                            CatmanV2C
                                            CatmanV2
                                            0
                                            5
                                            153

                                          • Can´t restart or upgrade/deploy MSR
                                            toggledbitsT
                                            toggledbits
                                            0
                                            4
                                            104

                                          • [Solved] Limit HA Entity in MSR
                                            wmarcolinW
                                            wmarcolin
                                            0
                                            7
                                            222

                                          • Disaster recovery and virtualisation
                                            CatmanV2C
                                            CatmanV2
                                            0
                                            5
                                            682

                                          • Remote access of Zwave stick from Z-wave server
                                            CatmanV2C
                                            CatmanV2
                                            0
                                            3
                                            396

                                          • Organizing/ structuring rule sets and rules
                                            G
                                            gwp1
                                            0
                                            5
                                            395

                                          • Moving MSR from a QNAP container to RP 5 - some issues
                                            G
                                            gwp1
                                            0
                                            5
                                            367

                                          • Widget deletion does not work and landing page (status) is empy
                                            G
                                            gwp1
                                            0
                                            4
                                            356

                                          • Need help reducing false positive notifications
                                            T
                                            tamorgen
                                            0
                                            7
                                            548
                                          Powered by NodeBB | Contributors
                                          Hosted freely by 10RUPTiV - Solutions Technologiques | Contact us
                                          • Login

                                          • Don't have an account? Register

                                          • Login or register to search.
                                          • First post
                                            Last post
                                          0
                                          • Categories
                                          • Recent
                                          • Tags
                                          • Popular
                                          • Unsolved