Skip to content
  • Categories
  • Recent
  • Tags
  • Popular
  • Unsolved
Collapse
Discussion Forum to share and further the development of home control and automation, independent of platforms.
  1. Home
  2. Software
  3. Multi-System Reactor
  4. [MSR] reactor-mqtt-contrib package for additional MQTT templates
[Reactor] Variables not updating correctly in latest-25201-2aa18550
therealdbT
Topic thumbnail image
Multi-System Reactor
Handling Dead Entities and Renamed Entities
PablaP
Hello all.. been a minute! I recently rebuilt my Z wave network and migrated to a new z wave stick. In order to prevent any downtime I kept my original z wave network up and ran a docker version of Z Wave JS UI with my new controller. This way I could add device by device without having any devices down. I finally moved all the devices over to my new stick today. The final step was to migrate everything from my Docker instance of Z Wave JS UI to the HA add-on of Z Wave JS UI. However during this migration some of the names didn't populate correctly which I later managed to import back into Z Wave JS UI. The issue was in Reactor it is stuck on the default names and the entities are not updating. I removed the controller from Reactor, restarted, hard refreshed, and added the controller back however the new entity names have not updated. Also it seems like the old entities from my previous instance of Z Wave JS UI are lingering and not being marked as dead (I believe a certain amount of time needs to lapse before they're marked as dead in Reactor). My goal is to basically purge all the entities for the 'ZWaveJS' controller in Reactor so it can pull all the updated entity names and only the entities that exist in Z Wave JS UI. I cannot find a quick way to do this, I know entities can be deleted one by one, but with over 100 entities this would take long I am guessing that if I added the controller with a new name in in the Reactor config it would pull the updated entities and names but I think that would break my rules since the entity IDs would change (I made sure to name all the entities the exact same as they were previously to prevent this issue).
Multi-System Reactor
Strange behavior for MQTT templates using payload and attributes
therealdbT
Topic thumbnail image
Multi-System Reactor
[MSR] reactor-mqtt-contrib package for additional MQTT templates
therealdbT
I'm slowly migrating all my stuff to MQTT under MSR, so I have a central place to integrate everything (and, in a not-so-distant future, to remove virtual devices from my Vera and leave it running zwave only). Anyway, here's my reactor-mqtt-contrib package: https://github.com/dbochicchio/reactor-mqtt-contrib Simply download yaml files (everything or just the ones you need) and you're good to go. I have mapped my most useful devices, but I'll add others soon. Feel free to ask for specific templates, since I've worked a lot in the last weeks to understand and operate them. The templates are supporting both init and query, so you have always up-to-date devices at startup, and the ability to poll them. Online status is supported as well, so you can get disconnected devices with a simple expression. Many-many thanks to @toggledbits for its dedication, support, and patience with me and my requests
Multi-System Reactor
HA 2025.9.4 Supported Yet?
CatmanV2C
Tangentially did I miss 2025.9.4 getting blessed in MSR? I've been holding off Cheers C
Multi-System Reactor
The reaction stopped working (Google Nest max playing a video)
F
Topic thumbnail image
Multi-System Reactor
Rule Set UI bug - RESOLVED
3
Topic thumbnail image
Multi-System Reactor
[Reactor] Copy&Paste of Rules
therealdbT
I don't know if I'm the only one, but managing more than one Reactor installs, the need to have some sort of copy&paste for rules has grown on me. While I understand the technical challenges, I'm wondering if a "god mode" where I could copy the raw JSON rule and paste it into another rule could be an advanced, flag only feature that could benefit power users. I know I can copy the JSON file and proceed, but I must stop Reactor and when doing maintenance, it's more clicks to do. Just an idea
Multi-System Reactor
[Reactor] Help with screne controller cycling logic
therealdbT
I’ve added a couple of Shelly Wave i4 as scene controllers and I’m planning to add more, since I can just use standard buttons instead of battery-powered scene controllers, which also looks better aesthetically. That said, I’m struggling to figure out how to write a simple rule that cycles between states every time I press a button. Example: Light 1 ON → OFF, then Light 2 ON → OFF. The part I can’t get right is handling the case where Light 1 or Light 2 might already be ON independently of the rule. Maybe it’s just too much sun and relaxation clouding my brain, but any hint would be appreciated.
Multi-System Reactor
Stop the MSR by an external switch on Hubitat.
wmarcolinW
Use case: When performing home maintenance, such as air conditioning, I want all rules involving air conditioning to be disabled. To do this, to day, I have a virtual switch that I placed within all rules involving air conditioning, meaning that if I turn it off, none of them work. Then another situation: the water pump system and garden irrigation, another switch. In short, I had to create several virtual switches in Hubitat to disable rules in MSR. Unfortunately, however, I was unable to cover all scenarios, so I wondered if it would be possible for MSR to support a virtual MSR switch, which, when configured in the reactor settings, would function as a general on/off switch for MSR. If it is configured and turned off, the entire rules and actions in MSR stops working, except for the status change reading process, specifically for this switch, which, when turned on, would restart the MSR. Would it be possible to do something like this? Any recommendations from the experts?
Multi-System Reactor
Expose MSR entities
CatmanV2C
Probably a really dumb question. Currently I am using the owntracks_sensor for tracking phones being in region in MSR and it works great. Digging around with Home Assistant and toying with some dashboards, is there any way of exposing that sensor to HA trivially? I could set MSR to trip a virtual switch in OpenLuup which can then be exposed to HA (with all my other Vera devices) but that feels a bit in-elegant if I can do it directly. Any thoughts? Apologies if the ask is not clear/ TIA C
Multi-System Reactor
Comment in Globa Expressions
Tom_DT
I have several Global Expressions that are set by a rule so the definition area is blank. I'd like to add a comment in this area that explains what is setting the value. Commenting in this area breaks the remote setting. Any way to document what is setting the GE?
Multi-System Reactor
Unofficial thread for compatibility
tunnusT
As there are statements about compatibility for home assistant versions in MSR new version announcements (e.g. "HassController: Bless Hass to 2025.7.3"), I thought it would be good idea to track other controllers as well. As an example, I can confirm that build "latest-25208-c53e8513" works with Hubitat Elevation C-8 platform version 2.4.2.134 using Maker API. Updates: (the latest versions first in the list) OK: build "latest-25264-2fbe9217" with Hubitat C-8 platform v. 2.4.3.123
Multi-System Reactor
Gradually turn on lights.
Tom_DT
I have several lights that I would like to turn on very gradually over 15 or 20 seconds. from 0 to .25 in .01 increments. I have tried a few things that came nowhere near working, so here I am.
Multi-System Reactor
Reactor (Multi-System/Multi-Hub) Announcements
toggledbitsT
Build 21228 has been released. Docker images available from DockerHub as usual, and bare-metal packages here. Home Assistant up to version 2021.8.6 supported; the online version of the manual will now state the current supported versions; Fix an error in OWMWeatherController that could cause it to stop updating; Unify the approach to entity filtering on all hub interface classes (controllers); this works for device entities only; it may be extended to other entities later; Improve error detail in messages for EzloController during auth phase; Add isRuleSet() and isRuleEnabled() functions to expressions extensions; Implement set action for lock and passage capabilities (makes them more easily scriptable in some cases); Fix a place in the UI where 24-hour time was not being displayed.
Multi-System Reactor
Can't customize home page
G
I foolishly let my system wipe all cookies this morning and with it my settings for my MSR home page. Once logged back in I can no longer remove errant panes nor is the + available to add new ones. Brave Browser v1.80.122 (Jul 16, 2025) What have I done?! Will check other browsers on my M1. UPDATE: Safari exhibits same behaviour. I've tried both sans last-four public key entry and with - no change.
Multi-System Reactor
Error After Upgrade
T
Topic thumbnail image
Multi-System Reactor
Reset attribute value of entity in event handler
R
Topic thumbnail image
Multi-System Reactor
Need help figuring out how to delay a reset on reaction
T
Topic thumbnail image
Multi-System Reactor
Way to search for rules (rule state) in other rules
T
@toggledbits, not sure if this is a feature request or I'm using the search tool wrong. You have a "Search for rule" in the Rules Set tab in MSR. It works nicely to find a rule and bring up said rule, but can it/could it be used for as a "where used?" global search? For instance, I have a fairly large set of rules, divided up into 10 different rulesets. There's easily a hundred individual rules, and many of the rules have Rule State triggers, which of course refer to other rules. Amongst my troubleshooting today, I came across what may have been a duplicate or troubleshooting attempt, but I can't tell if it's actually used as a Rule State in another rule without opening each rule that I suspect it may be a part of. Thanks.
Multi-System Reactor

[MSR] reactor-mqtt-contrib package for additional MQTT templates

Scheduled Pinned Locked Moved Multi-System Reactor
46 Posts 4 Posters 8.2k Views 4 Watching
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • CatmanV2C Offline
    CatmanV2C Offline
    CatmanV2
    wrote on last edited by
    #16

    Hmm, yes tough. I share your suspicion that it's Hive. No interest in firing up Mosquito on your Linux box? Takes about 10 minutes. OK there's an increase in your vulnerability but.....

    C

    The Ex-Vera abuser know as CatmanV2.....

    1 Reply Last reply
    0
    • toggledbitsT Offline
      toggledbitsT Offline
      toggledbits
      wrote on last edited by
      #17

      The docs for MQTTController describe how to enable topic capture, so you can see if you are getting anything at all from Hive (this is probably preferable to turning up the log level in the log file for MQTTController). I'd suggest that as a start. See what, if anything, it's sending at all.

      Ref: https://reactor.toggledbits.com/docs/MQTTController/#troubleshooting-and-debugging

      Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

      G 1 Reply Last reply
      1
      • CatmanV2C CatmanV2

        I am now, thanks!
        All looking good

        C

        therealdbT Offline
        therealdbT Offline
        therealdb
        wrote on last edited by
        #18

        @catmanv2 I hope you’ll enjoy it as much as I am 🤣

        --
        On a mission to automate everything.

        My MS Reactor contrib
        My Luup Plug-ins

        1 Reply Last reply
        0
        • toggledbitsT toggledbits

          The docs for MQTTController describe how to enable topic capture, so you can see if you are getting anything at all from Hive (this is probably preferable to turning up the log level in the log file for MQTTController). I'd suggest that as a start. See what, if anything, it's sending at all.

          Ref: https://reactor.toggledbits.com/docs/MQTTController/#troubleshooting-and-debugging

          G Offline
          G Offline
          gwp1
          wrote on last edited by
          #19

          @toggledbits @CatmanV2 Unless I'm just not far enough thru coffee this morning, this is what I see in MSR's mqtt logs and it looks like it's data from my iPhone8 (which I fired up via wifi to use as a test phone.)

          2022-12-12T14:02:02.896Z "owntracks/msrmqtt/iphone8" {"_type":"location","acc":35,"alt":10,"batt":100,"bs":1,"conn":"o","inregions":["Home"],"inrids":["adf34c"],"lat":32.94714,"lon":-80.013836,"m":1,"p":101.826,"t":"u","tid":"i8","tst":1670853720,"vac":15}
          2022-12-12T14:02:02.998Z "owntracks/msrmqtt/iphone8" {"_type":"location","acc":10,"alt":10,"batt":100,"bs":1,"conn":"o","inregions":["Home"],"inrids":["adf34c"],"lat":32.946934,"lon":-80.013887,"m":1,"p":101.827,"tid":"i8","tst":1670853722,"vac":8,"vel":0}
          

          So why isn't this showing here:

          247de6bd-7caa-4f61-8ce1-0ae48666f4ec-image.png

          My entity config is:

                  owntracks_iphone8: #entity ID - must be unique
                    name: "iPhone8 location" # friendly name
                    prefix: "iphone8"
                    topic: "test_iphone"
                    uses_template: owntracks_sensor
                    homeRegionName: "Home"
          

          I feel like I'm just "this close" and I just don't have something aligned properly.

          *Hubitat C-7 2.4.3.123
          *Proxmox VE v8, Beelink MiniPC 12GBs, SSD

          *HASS 2025.9.4
          w/ ZST10-700 fw 7.18.3

          *Prod MSR in docker/portainer
          MSR: latest-25264-2fbe9217
          MQTTController: 25139
          ZWave Controller: 25139

          1 Reply Last reply
          0
          • toggledbitsT Offline
            toggledbitsT Offline
            toggledbits
            wrote on last edited by toggledbits
            #20

            Yes, your configuration of prefix and topic don't make a string that matches what is being received. Based on what it is coming in and how those fields template configuration are used, prefix should be msrmqtt and topic should be just iphone8.

            Conspicuous give-away: your test_iphone value doesn't appear in the topic or payload of what you're receiving.

            @therealdb this may need a bit more documentation, since the relevance of prefix and topic aren't immediately clear (at least, not to me) without looking at the template itself and seeing how they are used, and likely the phone configuration as well (i.e. describe how configuration fields on the phone may appear in the final event topic).

            Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

            G therealdbT 2 Replies Last reply
            1
            • CatmanV2C Offline
              CatmanV2C Offline
              CatmanV2
              wrote on last edited by
              #21

              I believe @toggledbits has it (unsurprisingly)

              C

              The Ex-Vera abuser know as CatmanV2.....

              1 Reply Last reply
              0
              • toggledbitsT toggledbits

                Yes, your configuration of prefix and topic don't make a string that matches what is being received. Based on what it is coming in and how those fields template configuration are used, prefix should be msrmqtt and topic should be just iphone8.

                Conspicuous give-away: your test_iphone value doesn't appear in the topic or payload of what you're receiving.

                @therealdb this may need a bit more documentation, since the relevance of prefix and topic aren't immediately clear (at least, not to me) without looking at the template itself and seeing how they are used, and likely the phone configuration as well (i.e. describe how configuration fields on the phone may appear in the final event topic).

                G Offline
                G Offline
                gwp1
                wrote on last edited by
                #22

                @toggledbits I was just updating prefix when your response came in. Here's where I am now:

                      entities:
                        owntracks_iphone8: #entity ID - must be unique
                          name: "iPhone8 location" # friendly name
                          prefix: "msrmqtt"
                          topic: "iphone8"
                          uses_template: "owntracks_sensor"
                          homeRegionName: "Home"
                

                My template is in reactor/config/mqtt_templates which is where @therealdb directs. Do I need to modify the uses_template:?

                *Hubitat C-7 2.4.3.123
                *Proxmox VE v8, Beelink MiniPC 12GBs, SSD

                *HASS 2025.9.4
                w/ ZST10-700 fw 7.18.3

                *Prod MSR in docker/portainer
                MSR: latest-25264-2fbe9217
                MQTTController: 25139
                ZWave Controller: 25139

                1 Reply Last reply
                0
                • CatmanV2C Offline
                  CatmanV2C Offline
                  CatmanV2
                  wrote on last edited by
                  #23

                  I think the template is in the correct place. Let's see what happens when you restart Reactor

                  C

                  The Ex-Vera abuser know as CatmanV2.....

                  1 Reply Last reply
                  0
                  • toggledbitsT Offline
                    toggledbitsT Offline
                    toggledbits
                    wrote on last edited by
                    #24

                    @gwp1 Are you getting an error that the template owntracks_sensor doesn't exist?

                    Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                    G 1 Reply Last reply
                    0
                    • toggledbitsT toggledbits

                      @gwp1 Are you getting an error that the template owntracks_sensor doesn't exist?

                      G Offline
                      G Offline
                      gwp1
                      wrote on last edited by
                      #25

                      @toggledbits I am not receiving any errors.

                      08a4de13-3175-4d69-b492-4a98202b841f-image.png

                      Just not seeing anything populate the entity.

                      cef0bd91-1e63-4f77-ae2a-abb3d23ae390-image.png

                      Is it something to do with the entity name by any random chance?

                      *Hubitat C-7 2.4.3.123
                      *Proxmox VE v8, Beelink MiniPC 12GBs, SSD

                      *HASS 2025.9.4
                      w/ ZST10-700 fw 7.18.3

                      *Prod MSR in docker/portainer
                      MSR: latest-25264-2fbe9217
                      MQTTController: 25139
                      ZWave Controller: 25139

                      toggledbitsT 1 Reply Last reply
                      0
                      • G gwp1

                        @toggledbits I am not receiving any errors.

                        08a4de13-3175-4d69-b492-4a98202b841f-image.png

                        Just not seeing anything populate the entity.

                        cef0bd91-1e63-4f77-ae2a-abb3d23ae390-image.png

                        Is it something to do with the entity name by any random chance?

                        toggledbitsT Offline
                        toggledbitsT Offline
                        toggledbits
                        wrote on last edited by
                        #26

                        @gwp1 said in [MSR] reactor-mqtt-contrib package for additional MQTT templates:

                        @toggledbits I am not receiving any errors.

                        Then there's nothing wrong with uses_template.

                        I'll make the same comment/question to you that I made to @CatmanV2 earlier in this same thread: you're on the latest MQTTController, right?

                        Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                        G 1 Reply Last reply
                        0
                        • toggledbitsT toggledbits

                          @gwp1 said in [MSR] reactor-mqtt-contrib package for additional MQTT templates:

                          @toggledbits I am not receiving any errors.

                          Then there's nothing wrong with uses_template.

                          I'll make the same comment/question to you that I made to @CatmanV2 earlier in this same thread: you're on the latest MQTTController, right?

                          G Offline
                          G Offline
                          gwp1
                          wrote on last edited by gwp1
                          #27

                          @toggledbits MQTTController-22326 (double-checked the CHANGELOG.md)

                          EDIT: ...which I now see is a version behind. You snuck one in on me. Updating to MQTTController-22340.

                          EDIT2: Nailed it.
                          8009852f-2527-46c2-a2da-508b073c5dec-image.png

                          *Hubitat C-7 2.4.3.123
                          *Proxmox VE v8, Beelink MiniPC 12GBs, SSD

                          *HASS 2025.9.4
                          w/ ZST10-700 fw 7.18.3

                          *Prod MSR in docker/portainer
                          MSR: latest-25264-2fbe9217
                          MQTTController: 25139
                          ZWave Controller: 25139

                          G CatmanV2C 2 Replies Last reply
                          1
                          • G gwp1

                            @toggledbits MQTTController-22326 (double-checked the CHANGELOG.md)

                            EDIT: ...which I now see is a version behind. You snuck one in on me. Updating to MQTTController-22340.

                            EDIT2: Nailed it.
                            8009852f-2527-46c2-a2da-508b073c5dec-image.png

                            G Offline
                            G Offline
                            gwp1
                            wrote on last edited by
                            #28

                            @toggledbits @therealdb @CatmanV2 Thank you all for your help here, this is a big step in my system. Really appreciate it!

                            *Hubitat C-7 2.4.3.123
                            *Proxmox VE v8, Beelink MiniPC 12GBs, SSD

                            *HASS 2025.9.4
                            w/ ZST10-700 fw 7.18.3

                            *Prod MSR in docker/portainer
                            MSR: latest-25264-2fbe9217
                            MQTTController: 25139
                            ZWave Controller: 25139

                            1 Reply Last reply
                            2
                            • CatmanV2C Offline
                              CatmanV2C Offline
                              CatmanV2
                              wrote on last edited by
                              #29

                              @therealdb what are your updates set to on the iPhone app? The data is going to be useful, but on 'Significant' I appear to be only getting updates on
                              string and region which makes sense.
                              I'm assuming that battery_power.level won't update more frequently unless the app is configured to 'Move'

                              Has anyone done that? Does it kill the iPhone battery?

                              Cheers

                              C

                              The Ex-Vera abuser know as CatmanV2.....

                              1 Reply Last reply
                              0
                              • G gwp1

                                @toggledbits MQTTController-22326 (double-checked the CHANGELOG.md)

                                EDIT: ...which I now see is a version behind. You snuck one in on me. Updating to MQTTController-22340.

                                EDIT2: Nailed it.
                                8009852f-2527-46c2-a2da-508b073c5dec-image.png

                                CatmanV2C Offline
                                CatmanV2C Offline
                                CatmanV2
                                wrote on last edited by
                                #30

                                @gwp1 how did you get the Driving Flag?

                                Cheers

                                C

                                The Ex-Vera abuser know as CatmanV2.....

                                G 1 Reply Last reply
                                0
                                • CatmanV2C CatmanV2

                                  @gwp1 how did you get the Driving Flag?

                                  Cheers

                                  C

                                  G Offline
                                  G Offline
                                  gwp1
                                  wrote on last edited by gwp1
                                  #31

                                  @catmanv2 move translates to any movement your phone is making - increases accuracy but kills battery life. significant is defined by OwnTracks as "traveling a distance of at least 500 meters in 5 minutes" which lets the app nap and is much easier on the battery.

                                  Driving Flag is a virtual switch I created based on distance from Home. I believe I currently have it set to .1 mile so it trips as soon as I pull out of the neighborhood. I use it as a safety to the GPS reporting for when I'm not home. I have a second one called Driving Flag - Far Away that kicks in at two miles. This is for use when I'm obviously not just puttering about the neighborhood but going to be gone while. Can be used to trigger HVAC, etc.

                                  *Hubitat C-7 2.4.3.123
                                  *Proxmox VE v8, Beelink MiniPC 12GBs, SSD

                                  *HASS 2025.9.4
                                  w/ ZST10-700 fw 7.18.3

                                  *Prod MSR in docker/portainer
                                  MSR: latest-25264-2fbe9217
                                  MQTTController: 25139
                                  ZWave Controller: 25139

                                  1 Reply Last reply
                                  1
                                  • CatmanV2C Offline
                                    CatmanV2C Offline
                                    CatmanV2
                                    wrote on last edited by
                                    #32

                                    Cool, ta

                                    C

                                    The Ex-Vera abuser know as CatmanV2.....

                                    1 Reply Last reply
                                    0
                                    • toggledbitsT toggledbits

                                      Yes, your configuration of prefix and topic don't make a string that matches what is being received. Based on what it is coming in and how those fields template configuration are used, prefix should be msrmqtt and topic should be just iphone8.

                                      Conspicuous give-away: your test_iphone value doesn't appear in the topic or payload of what you're receiving.

                                      @therealdb this may need a bit more documentation, since the relevance of prefix and topic aren't immediately clear (at least, not to me) without looking at the template itself and seeing how they are used, and likely the phone configuration as well (i.e. describe how configuration fields on the phone may appear in the final event topic).

                                      therealdbT Offline
                                      therealdbT Offline
                                      therealdb
                                      wrote on last edited by
                                      #33

                                      @toggledbits said in [MSR] reactor-mqtt-contrib package for additional MQTT templates:

                                      @therealdb this may need a bit more documentation, since the relevance of prefix and topic aren't immediately clear (at least, not to me) without looking at the template itself and seeing how they are used, and likely the phone configuration as well (i.e. describe how configuration fields on the phone may appear in the final event topic).

                                      It’s in the readme. Maybe, when you’ll build an UI, we could provide descriptive text for parameters.

                                      --
                                      On a mission to automate everything.

                                      My MS Reactor contrib
                                      My Luup Plug-ins

                                      1 Reply Last reply
                                      0
                                      • therealdbT Offline
                                        therealdbT Offline
                                        therealdb
                                        wrote on last edited by therealdb
                                        #34

                                        Version 22350 released.
                                        What's new:

                                        • shelly_button1: for Shelly Button 1 (battery powered button) - all the button modes (short, long, double, triple) are supported.
                                        • fullykiosk: to handle messages coming from FullyKiosk. You'll have battery and charging status, screen brightness and current app.

                                        What's fixed:

                                        • query for all shelly template
                                        • owntracks: trying to better handle null values/spurious messages.

                                        How to update: just replace the files and restart Reactor.

                                        --
                                        On a mission to automate everything.

                                        My MS Reactor contrib
                                        My Luup Plug-ins

                                        G 2 Replies Last reply
                                        1
                                        • therealdbT therealdb

                                          Version 22350 released.
                                          What's new:

                                          • shelly_button1: for Shelly Button 1 (battery powered button) - all the button modes (short, long, double, triple) are supported.
                                          • fullykiosk: to handle messages coming from FullyKiosk. You'll have battery and charging status, screen brightness and current app.

                                          What's fixed:

                                          • query for all shelly template
                                          • owntracks: trying to better handle null values/spurious messages.

                                          How to update: just replace the files and restart Reactor.

                                          G Offline
                                          G Offline
                                          gwp1
                                          wrote on last edited by
                                          #35

                                          @therealdb I grabbed the latest owntracks_sensor and dropped it on top of the existing. (Yes, being late and I'm exhausted I failed to backup the original template.)

                                                  owntracks_iphone14p: #entity ID - must be unique
                                                    name: "iPhone14p J2A" # friendly name
                                                    prefix: "msrmqtt"
                                                    topic: "iphone14p-j2a"
                                                    uses_template: "owntracks_sensor"
                                                    homeRegionName: "Home"
                                          #
                                                  owntracks_iphone8: #entity ID - must be unique
                                                    name: "iPhone8 location" # friendly name
                                                    prefix: "msrmqtt"
                                                    topic: "iphone8-j2a"
                                                    uses_template: "owntracks_sensor"
                                                    homeRegionName: "Home"
                                          #
                                                  owntracks_iphone14jay: #entity ID - must be unique
                                                    name: "iPhone14max Jay" # friendly name
                                                    prefix: "msrmqtt"
                                                    topic: "iphone14max-jay"
                                                    uses_template: "owntracks_sensor"
                                                    homeRegionName: "CoralBerry"
                                          #
                                                  owntracks_iphone14jen: #entity ID - must be unique
                                                    name: "iPhone14 Jen" # friendly name
                                                    prefix: "msrmqtt"
                                                    topic: "iphone14-jen"
                                                    uses_template: "owntracks_sensor"
                                                    homeRegionName: "CoralBerry"
                                          #
                                                  owntracks_iphone14addie: #entity ID - must be unique
                                                    name: "iPhone14 Addie" # friendly name
                                                    prefix: "msrmqtt"
                                                    topic: "iphone14-addie"
                                                    uses_template: "owntracks_sensor"
                                                    homeRegionName: "CoralBerry"
                                          #
                                                  owntracks_iphone14bella: #entity ID - must be unique
                                                    name: "iPhone14 Bella" # friendly name
                                                    prefix: "msrmqtt"
                                                    topic: "iphone14-bella"
                                                    uses_template: "owntracks_sensor"
                                                    homeRegionName: "CoralBerry"
                                          

                                          That's my config... and this is my log since replacing/restarting:

                                               ... le" content="{"groups": [], "environmentKey" ... 
                                                                                   ^ [-]
                                          [latest-22349]2022-12-19T04:51:40.735Z <MQTTController:CRIT> YAMLException: end of the stream or a document separator is expected at line 21, column 66:
                                               ... le" content="{&quot;groups&quot;: [], &quot;environmentKey&quot; ... 
                                                                                   ^ [-]
                                          YAMLException: end of the stream or a document separator is expected at line 21, column 66:
                                               ... le" content="{&quot;groups&quot;: [], &quot;environmentKey&quot; ... 
                                                                                   ^
                                              at generateError (/home/reactor/Documents/reactor/node_modules/js-yaml/lib/js-yaml/loader.js:167:10)
                                              at throwError (/home/reactor/Documents/reactor/node_modules/js-yaml/lib/js-yaml/loader.js:173:9)
                                              at readDocument (/home/reactor/Documents/reactor/node_modules/js-yaml/lib/js-yaml/loader.js:1545:5)
                                              at loadDocuments (/home/reactor/Documents/reactor/node_modules/js-yaml/lib/js-yaml/loader.js:1588:5)
                                              at load (/home/reactor/Documents/reactor/node_modules/js-yaml/lib/js-yaml/loader.js:1614:19)
                                              at Object.safeLoad (/home/reactor/Documents/reactor/node_modules/js-yaml/lib/js-yaml/loader.js:1637:10)
                                              at MQTTController._load_implementation (/home/reactor/Documents/reactor/ext/MQTTController/MQTTController.js:753:38)
                                              at async MQTTController.start (/home/reactor/Documents/reactor/ext/MQTTController/MQTTController.js:81:13)
                                          [latest-22349]2022-12-19T04:51:40.744Z <MQTTController:ERR> MQTTController#mqtt2 can't read/load templates from /home/reactor/Documents/reactor/config/mqtt_templates/owntracks_sensor.yaml: [YAMLException] end of the stream or a document separator is expected at line 21, column 66:
                                               ... le" content="{&quot;groups&quot;: [], &quot;environmentKey&quot; ... 
                                                                                   ^ [-]
                                          [latest-22349]2022-12-19T04:51:40.754Z <MQTTController:CRIT> YAMLException: end of the stream or a document separator is expected at line 21, column 66:
                                               ... le" content="{&quot;groups&quot;: [], &quot;environmentKey&quot; ... 
                                                                                   ^ [-]
                                          YAMLException: end of the stream or a document separator is expected at line 21, column 66:
                                               ... le" content="{&quot;groups&quot;: [], &quot;environmentKey&quot; ... 
                                                                                   ^
                                              at generateError (/home/reactor/Documents/reactor/node_modules/js-yaml/lib/js-yaml/loader.js:167:10)
                                              at throwError (/home/reactor/Documents/reactor/node_modules/js-yaml/lib/js-yaml/loader.js:173:9)
                                              at readDocument (/home/reactor/Documents/reactor/node_modules/js-yaml/lib/js-yaml/loader.js:1545:5)
                                              at loadDocuments (/home/reactor/Documents/reactor/node_modules/js-yaml/lib/js-yaml/loader.js:1588:5)
                                              at load (/home/reactor/Documents/reactor/node_modules/js-yaml/lib/js-yaml/loader.js:1614:19)
                                              at Object.safeLoad (/home/reactor/Documents/reactor/node_modules/js-yaml/lib/js-yaml/loader.js:1637:10)
                                              at MQTTController._load_implementation (/home/reactor/Documents/reactor/ext/MQTTController/MQTTController.js:753:38)
                                              at async MQTTController.start (/home/reactor/Documents/reactor/ext/MQTTController/MQTTController.js:81:13)
                                          [latest-22349]2022-12-19T04:51:40.759Z <HassController:NOTICE> HassController#hass connecting to ws://192.168.1.198:8123/api/websocket
                                          [latest-22349]2022-12-19T04:51:40.766Z <MQTTController:INFO> MQTTController#mqtt instance topic ident is mqtt
                                          [latest-22349]2022-12-19T04:51:40.767Z <Controller:INFO> MQTTController#mqtt 0 dead entities older than 86400000s purged
                                          [latest-22349]2022-12-19T04:51:40.769Z <MQTTController:NOTICE> MQTTController#mqtt connecting to broker at mqtt://192.168.1.198:1883/
                                          [latest-22349]2022-12-19T04:51:40.843Z <MQTTController:INFO> MQTTController#mqtt2 instance topic ident is mqtt2
                                          [latest-22349]2022-12-19T04:51:40.844Z <MQTTController:ERR> MQTTController#mqtt2 entity owntracks_iphone14p uses_template=owntracks_sensor, template not defined
                                          [latest-22349]2022-12-19T04:51:40.853Z <MQTTController:ERR> MQTTController#mqtt2 entity owntracks_iphone8 uses_template=owntracks_sensor, template not defined
                                          [latest-22349]2022-12-19T04:51:40.890Z <MQTTController:ERR> MQTTController#mqtt2 entity owntracks_iphone14jay uses_template=owntracks_sensor, template not defined
                                          [latest-22349]2022-12-19T04:51:40.901Z <MQTTController:ERR> MQTTController#mqtt2 entity owntracks_iphone14jen uses_template=owntracks_sensor, template not defined
                                          [latest-22349]2022-12-19T04:51:40.914Z <MQTTController:ERR> MQTTController#mqtt2 entity owntracks_iphone14addie uses_template=owntracks_sensor, template not defined
                                          [latest-22349]2022-12-19T04:51:40.923Z <MQTTController:ERR> MQTTController#mqtt2 entity owntracks_iphone14bella uses_template=owntracks_sensor, template not defined
                                          [latest-22349]2022-12-19T04:51:40.944Z <MQTTController:NOTICE> MQTTController#mqtt2 device owntracks_iphone14addie no longer available, marking BinarySensor#mqtt2>owntracks_iphone14addie for removal
                                          [latest-22349]2022-12-19T04:51:40.952Z <MQTTController:NOTICE> MQTTController#mqtt2 device owntracks_iphone14bella no longer available, marking BinarySensor#mqtt2>owntracks_iphone14bella for removal
                                          [latest-22349]2022-12-19T04:51:40.960Z <MQTTController:NOTICE> MQTTController#mqtt2 device owntracks_iphone14jay no longer available, marking BinarySensor#mqtt2>owntracks_iphone14jay for removal
                                          [latest-22349]2022-12-19T04:51:40.967Z <MQTTController:NOTICE> MQTTController#mqtt2 device owntracks_iphone14jen no longer available, marking BinarySensor#mqtt2>owntracks_iphone14jen for removal
                                          [latest-22349]2022-12-19T04:51:40.974Z <MQTTController:NOTICE> MQTTController#mqtt2 device owntracks_iphone14p no longer available, marking BinarySensor#mqtt2>owntracks_iphone14p for removal
                                          [latest-22349]2022-12-19T04:51:40.980Z <MQTTController:NOTICE> MQTTController#mqtt2 device owntracks_iphone8 no longer available, marking BinarySensor#mqtt2>owntracks_iphone8 for removal
                                          [latest-22349]2022-12-19T04:51:40.987Z <Controller:INFO> MQTTController#mqtt2 0 dead entities older than 86400000s purged
                                          [latest-22349]2022-12-19T04:51:40.988Z <MQTTController:NOTICE> MQTTController#mqtt2 connecting to broker at mqtts://7ef71f0117fe40d28c2df12205c4a0d0.s2.eu.hivemq.cloud:8883
                                          

                                          *Hubitat C-7 2.4.3.123
                                          *Proxmox VE v8, Beelink MiniPC 12GBs, SSD

                                          *HASS 2025.9.4
                                          w/ ZST10-700 fw 7.18.3

                                          *Prod MSR in docker/portainer
                                          MSR: latest-25264-2fbe9217
                                          MQTTController: 25139
                                          ZWave Controller: 25139

                                          1 Reply Last reply
                                          0
                                          Reply
                                          • Reply as topic
                                          Log in to reply
                                          • Oldest to Newest
                                          • Newest to Oldest
                                          • Most Votes


                                          Recent Topics

                                          • Caution: zwave-js-ui docker 11.4.0 is broken
                                            toggledbitsT
                                            toggledbits
                                            0
                                            2
                                            30

                                          • [Reactor] Variables not updating correctly in latest-25201-2aa18550
                                            toggledbitsT
                                            toggledbits
                                            0
                                            68
                                            4.8k

                                          • Shelly Wall Display XL
                                            therealdbT
                                            therealdb
                                            2
                                            6
                                            93

                                          • Handling Dead Entities and Renamed Entities
                                            PablaP
                                            Pabla
                                            0
                                            5
                                            84

                                          • Strange behavior for MQTT templates using payload and attributes
                                            toggledbitsT
                                            toggledbits
                                            0
                                            6
                                            132

                                          • [MSR] reactor-mqtt-contrib package for additional MQTT templates
                                            therealdbT
                                            therealdb
                                            1
                                            46
                                            8.2k

                                          • HA 2025.9.4 Supported Yet?
                                            toggledbitsT
                                            toggledbits
                                            0
                                            2
                                            87

                                          • The reaction stopped working (Google Nest max playing a video)
                                            toggledbitsT
                                            toggledbits
                                            0
                                            7
                                            355

                                          • Rule Set UI bug - RESOLVED
                                            toggledbitsT
                                            toggledbits
                                            1
                                            2
                                            234

                                          • [Reactor] Copy&Paste of Rules
                                            therealdbT
                                            therealdb
                                            0
                                            1
                                            300

                                          • [Reactor] Help with screne controller cycling logic
                                            toggledbitsT
                                            toggledbits
                                            0
                                            5
                                            404

                                          • Stop the MSR by an external switch on Hubitat.
                                            Tom_DT
                                            Tom_D
                                            0
                                            6
                                            739
                                          Powered by NodeBB | Contributors
                                          Hosted freely by 10RUPTiV - Solutions Technologiques | Contact us
                                          • Login

                                          • Don't have an account? Register

                                          • Login or register to search.
                                          • First post
                                            Last post
                                          0
                                          • Categories
                                          • Recent
                                          • Tags
                                          • Popular
                                          • Unsolved