Skip to content
  • Categories
  • Recent
  • Tags
  • Popular
  • Unsolved
Collapse
Discussion Forum to share and further the development of home control and automation, independent of platforms.
  1. Home
  2. Software
  3. Multi-System Reactor
  4. [MSR] reactor-mqtt-contrib package for additional MQTT templates
Gradually turn on lights.
Tom_DT
I have several lights that I would like to turn on very gradually over 15 or 20 seconds. from 0 to .25 in .01 increments. I have tried a few things that came nowhere near working, so here I am.
Multi-System Reactor
Stop the MSR by an external switch on Hubitat.
wmarcolinW
Use case: When performing home maintenance, such as air conditioning, I want all rules involving air conditioning to be disabled. To do this, to day, I have a virtual switch that I placed within all rules involving air conditioning, meaning that if I turn it off, none of them work. Then another situation: the water pump system and garden irrigation, another switch. In short, I had to create several virtual switches in Hubitat to disable rules in MSR. Unfortunately, however, I was unable to cover all scenarios, so I wondered if it would be possible for MSR to support a virtual MSR switch, which, when configured in the reactor settings, would function as a general on/off switch for MSR. If it is configured and turned off, the entire rules and actions in MSR stops working, except for the status change reading process, specifically for this switch, which, when turned on, would restart the MSR. Would it be possible to do something like this? Any recommendations from the experts?
Multi-System Reactor
Error After Upgrade
T
Topic thumbnail image
Multi-System Reactor
Reset attribute value of entity in event handler
R
Topic thumbnail image
Multi-System Reactor
Need help figuring out how to delay a reset on reaction
T
Topic thumbnail image
Multi-System Reactor
Way to search for rules (rule state) in other rules
T
@toggledbits, not sure if this is a feature request or I'm using the search tool wrong. You have a "Search for rule" in the Rules Set tab in MSR. It works nicely to find a rule and bring up said rule, but can it/could it be used for as a "where used?" global search? For instance, I have a fairly large set of rules, divided up into 10 different rulesets. There's easily a hundred individual rules, and many of the rules have Rule State triggers, which of course refer to other rules. Amongst my troubleshooting today, I came across what may have been a duplicate or troubleshooting attempt, but I can't tell if it's actually used as a Rule State in another rule without opening each rule that I suspect it may be a part of. Thanks.
Multi-System Reactor
Links to MSR from HA
Tom_DT
I am using Home Assistant a lot recently. On a dashboard showing the devices, I would like to show a link to the MSR rule that controls the devices. Is there a way to link directly into MSR?
Multi-System Reactor
Set Reaction > Script Action
wmarcolinW
Topic thumbnail image
Multi-System Reactor
Errors after updating to MQTTController build 25139
tunnusT
I'm running MSR build 25139 on Docker, using MQTT controller 24293, and everything working as expected. But if I try to upgrade to MQTTController build 25139, I'm getting the following errors on MSR UI: An Entity Attribute condition in "Lay-Z-Spa auto heating off" (Terrace) failed because the referenced entity "Lay-Z-Spa States" (mqtt>layzspa_states) does not have attribute value_sensor.god Last 11:20:37 An Entity Attribute condition in "Lay-Z-Spa auto heating off" (Terrace) failed because the referenced entity "Lay-Z-Spa States" (mqtt>layzspa_states) does not have attribute temperature_sensor.green Last 11:20:37 An Entity Attribute condition in "Lay-Z-Spa filter pump auto off" (Terrace) failed because the referenced entity "Lay-Z-Spa States" (mqtt>layzspa_states) does not have attribute temperature_sensor.red Last 11:20:37 An Entity Attribute condition in "Lay-Z-Spa filter pump auto run" (Terrace) failed because the referenced entity "Lay-Z-Spa States" (mqtt>layzspa_states) does not have attribute value_sensor.pump Last 11:20:37 An Entity Attribute condition in "Lay-Z-Spa watchdog" (Terrace) failed because the referenced entity "Lay-Z-Spa States" (mqtt>layzspa_states) does not have attribute value_sensor.status Last 11:20:37 My MQTT configuration (local_mqtt_devices.yaml) for the related entity is: layzspa_message: type: ValueSensor capabilities: ["temperature_sensor", "value_sensor", "power_sensor"] primary_attribute: power_sensor.value events: "layzspa/message": "power_sensor.value": json_payload: true if_expr: '! isnull( payload?.PWR )' expr: "float(payload.PWR)" "value_sensor.air": json_payload: true if_expr: '! isnull( payload?.AIR )' expr: "float(payload.AIR)" "value_sensor.pump": json_payload: true if_expr: '! isnull( payload?.FLT )' expr: "float(payload.FLT)" "value_sensor.god": json_payload: true if_expr: '! isnull( payload?.GOD )' expr: "float(payload.GOD)" "value_sensor.lock": json_payload: true if_expr: '! isnull( payload?.LCK )' expr: "float(payload.LCK)" "value_sensor.unit": json_payload: true if_expr: '! isnull( payload?.UNT )' expr: "float(payload.UNT)" "value_sensor.error": json_payload: true if_expr: '! isnull( payload?.ERR )' expr: "float(payload.ERR)" "temperature_sensor.green": json_payload: true if_expr: '! isnull( payload?.GRN )' expr: "float(payload.GRN)" "temperature_sensor.red": json_payload: true if_expr: '! isnull( payload?.RED )' expr: "float(payload.RED)" "temperature_sensor.target": json_payload: true if_expr: '! isnull( payload?.TGT )' expr: "float(payload.TGT)" "temperature_sensor.value": json_payload: true if_expr: '! isnull( payload?.TMP )' expr: "float(payload.TMP)" "temperature_sensor.virtual": json_payload: true if_expr: '! isnull( payload?.VTM )' expr: "round(float(payload.VTM), 1)" "temperature_sensor.ambient": json_payload: true if_expr: '! isnull( payload?.AMB )' expr: "float(payload.AMB)" "layzspa/Status": "value_sensor.status": if_expr: '! isnull( payload )' expr: "payload" "layzspa/button": "value_sensor.button": if_expr: '! isnull( payload )' expr: "payload" and in reactor.yaml I have: "layzspa_states": name: "Lay-Z-Spa States" friendly_name: 'Lay-Z-Spa States' include: layzspa_message I realize my MQTT configuration might be a bit unorthodox, but could there still be something unintentional in the latest MQTTController build? If needed, I can provide detailed logs.
Multi-System Reactor
🎉 My very first MSR controller: OpenSprinkler
therealdbT
Since today is my birthday - and I still pretend to be unconventional - I'm giving away a present to this wonderful community and I'm releasing my first OpenSprinkler controller for MSR. It was real fun to code it - and while it's still WIP, it seems to work OK for me. It's polling-based at the moment, but I'll add support for updates via MQTT very soon (it's already partially coded). Get it at (install is similar to MQTTController and such): https://github.com/dbochicchio/reactor-opensprinkler Feel free to try it. It's beta software, but it's stable. I'll update it weekly until all the tasks from my todo list are empty. Since I've learnt a lot from this controller, I'll explore new controllers soon.
Multi-System Reactor
Advice reqeusted to migrate MSR from Bare Metal to Container
T
Good day all, I'm in the process of trying to shut down my 10 year old Linux home server that served many purposes, but primarily it's what I used for my NAS/Plex Media server. I migrated the NAS aspect of the server in November of last year to a true NAS solution (Ubiquti UNAS Pro), which is rack mount and much more efficient than my old tower, which it's only side benefit was heating my home office during the winter. Unfortunately it also means heating my home office during the summer, which were about to be in full swing. I have two things running on this 10 year old server at this point. MSR and pi-hole. I'm running Plex Media Server on Fedora Workstation in Podman on mini PC, which is much more energy efficient than my old tower. My next step is to migrate MSR. I know there are images of MSR out there, and creating it is well documented. I'm going to be using Podman instead of Docker for various reasons, but they work very similar. What I don't know, is what I need to do to migrate my existing Bare Metal installation over to a container. Has anyone done this? Any advice?
Multi-System Reactor
Reactor (Multi-System/Multi-Hub) Announcements
toggledbitsT
Build 21228 has been released. Docker images available from DockerHub as usual, and bare-metal packages here. Home Assistant up to version 2021.8.6 supported; the online version of the manual will now state the current supported versions; Fix an error in OWMWeatherController that could cause it to stop updating; Unify the approach to entity filtering on all hub interface classes (controllers); this works for device entities only; it may be extended to other entities later; Improve error detail in messages for EzloController during auth phase; Add isRuleSet() and isRuleEnabled() functions to expressions extensions; Implement set action for lock and passage capabilities (makes them more easily scriptable in some cases); Fix a place in the UI where 24-hour time was not being displayed.
Multi-System Reactor
Can´t restart or upgrade/deploy MSR
F
Topic thumbnail image
Multi-System Reactor
[Solved] Limit HA Entity in MSR
wmarcolinW
Topic thumbnail image
Multi-System Reactor
Organizing/ structuring rule sets and rules
R
Hi guys, Just wondering how you guys organize your rule sets and rules. I wish I had an extra layer to have some more granularity, but my feature request was not popular. Maybe there are better ways to organize my rule sets. I use the rule sets now primarily for rooms. So a rule set per room. But maybe grouping by functionality works better. Any examples/ suggestions would be appreciated.
Multi-System Reactor
Moving MSR from a QNAP container to RP 5 - some issues
Tom_DT
Topic thumbnail image
Multi-System Reactor
Widget deletion does not work and landing page (status) is empy
M
Topic thumbnail image
Multi-System Reactor
Need help reducing false positive notifications
T
Topic thumbnail image
Multi-System Reactor
Deleting widgets
tunnusT
Hopefully a trivial question, but how do you delete widgets in a status page? Using build 22266
Multi-System Reactor
MQTT configuration question
tunnusT
I have the following yaml configuration in local_mqtt_devices file x_mqtt_device: set_speed: arguments: speed: type: str topic: "command/%friendly_name%" payload: type: json expr: '{ "fan": parameters.speed }' While this works fine, I'm wondering how this could be changed to "fixed" parameters, as in this case "fan" only accepts "A", "Q" or a numeric value of 1-5?
Multi-System Reactor

[MSR] reactor-mqtt-contrib package for additional MQTT templates

Scheduled Pinned Locked Moved Multi-System Reactor
44 Posts 4 Posters 5.6k Views 4 Watching
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • CatmanV2C Offline
    CatmanV2C Offline
    CatmanV2
    wrote on last edited by
    #16

    Hmm, yes tough. I share your suspicion that it's Hive. No interest in firing up Mosquito on your Linux box? Takes about 10 minutes. OK there's an increase in your vulnerability but.....

    C

    The Ex-Vera abuser know as CatmanV2.....

    1 Reply Last reply
    0
    • toggledbitsT Away
      toggledbitsT Away
      toggledbits
      wrote on last edited by
      #17

      The docs for MQTTController describe how to enable topic capture, so you can see if you are getting anything at all from Hive (this is probably preferable to turning up the log level in the log file for MQTTController). I'd suggest that as a start. See what, if anything, it's sending at all.

      Ref: https://reactor.toggledbits.com/docs/MQTTController/#troubleshooting-and-debugging

      Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

      G 1 Reply Last reply
      1
      • CatmanV2C CatmanV2

        I am now, thanks!
        All looking good

        C

        therealdbT Offline
        therealdbT Offline
        therealdb
        wrote on last edited by
        #18

        @catmanv2 I hope you’ll enjoy it as much as I am 🤣

        --
        On a mission to automate everything.

        My MS Reactor contrib
        My Luup Plug-ins

        1 Reply Last reply
        0
        • toggledbitsT toggledbits

          The docs for MQTTController describe how to enable topic capture, so you can see if you are getting anything at all from Hive (this is probably preferable to turning up the log level in the log file for MQTTController). I'd suggest that as a start. See what, if anything, it's sending at all.

          Ref: https://reactor.toggledbits.com/docs/MQTTController/#troubleshooting-and-debugging

          G Offline
          G Offline
          gwp1
          wrote on last edited by
          #19

          @toggledbits @CatmanV2 Unless I'm just not far enough thru coffee this morning, this is what I see in MSR's mqtt logs and it looks like it's data from my iPhone8 (which I fired up via wifi to use as a test phone.)

          2022-12-12T14:02:02.896Z "owntracks/msrmqtt/iphone8" {"_type":"location","acc":35,"alt":10,"batt":100,"bs":1,"conn":"o","inregions":["Home"],"inrids":["adf34c"],"lat":32.94714,"lon":-80.013836,"m":1,"p":101.826,"t":"u","tid":"i8","tst":1670853720,"vac":15}
          2022-12-12T14:02:02.998Z "owntracks/msrmqtt/iphone8" {"_type":"location","acc":10,"alt":10,"batt":100,"bs":1,"conn":"o","inregions":["Home"],"inrids":["adf34c"],"lat":32.946934,"lon":-80.013887,"m":1,"p":101.827,"tid":"i8","tst":1670853722,"vac":8,"vel":0}
          

          So why isn't this showing here:

          247de6bd-7caa-4f61-8ce1-0ae48666f4ec-image.png

          My entity config is:

                  owntracks_iphone8: #entity ID - must be unique
                    name: "iPhone8 location" # friendly name
                    prefix: "iphone8"
                    topic: "test_iphone"
                    uses_template: owntracks_sensor
                    homeRegionName: "Home"
          

          I feel like I'm just "this close" and I just don't have something aligned properly.

          *Hubitat C-7 2.4.1.177
          *Proxmox VE v8, Beelink MiniPC 12GBs, SSD

          *HASS 2025.6.0
          w/ ZST10-700 fw 7.18.3

          *Prod MSR in docker/portainer
          MSR: latest-25139-fbd67abc
          MQTTController: 25139
          ZWave Controller: 25139

          1 Reply Last reply
          0
          • toggledbitsT Away
            toggledbitsT Away
            toggledbits
            wrote on last edited by toggledbits
            #20

            Yes, your configuration of prefix and topic don't make a string that matches what is being received. Based on what it is coming in and how those fields template configuration are used, prefix should be msrmqtt and topic should be just iphone8.

            Conspicuous give-away: your test_iphone value doesn't appear in the topic or payload of what you're receiving.

            @therealdb this may need a bit more documentation, since the relevance of prefix and topic aren't immediately clear (at least, not to me) without looking at the template itself and seeing how they are used, and likely the phone configuration as well (i.e. describe how configuration fields on the phone may appear in the final event topic).

            Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

            G therealdbT 2 Replies Last reply
            1
            • CatmanV2C Offline
              CatmanV2C Offline
              CatmanV2
              wrote on last edited by
              #21

              I believe @toggledbits has it (unsurprisingly)

              C

              The Ex-Vera abuser know as CatmanV2.....

              1 Reply Last reply
              0
              • toggledbitsT toggledbits

                Yes, your configuration of prefix and topic don't make a string that matches what is being received. Based on what it is coming in and how those fields template configuration are used, prefix should be msrmqtt and topic should be just iphone8.

                Conspicuous give-away: your test_iphone value doesn't appear in the topic or payload of what you're receiving.

                @therealdb this may need a bit more documentation, since the relevance of prefix and topic aren't immediately clear (at least, not to me) without looking at the template itself and seeing how they are used, and likely the phone configuration as well (i.e. describe how configuration fields on the phone may appear in the final event topic).

                G Offline
                G Offline
                gwp1
                wrote on last edited by
                #22

                @toggledbits I was just updating prefix when your response came in. Here's where I am now:

                      entities:
                        owntracks_iphone8: #entity ID - must be unique
                          name: "iPhone8 location" # friendly name
                          prefix: "msrmqtt"
                          topic: "iphone8"
                          uses_template: "owntracks_sensor"
                          homeRegionName: "Home"
                

                My template is in reactor/config/mqtt_templates which is where @therealdb directs. Do I need to modify the uses_template:?

                *Hubitat C-7 2.4.1.177
                *Proxmox VE v8, Beelink MiniPC 12GBs, SSD

                *HASS 2025.6.0
                w/ ZST10-700 fw 7.18.3

                *Prod MSR in docker/portainer
                MSR: latest-25139-fbd67abc
                MQTTController: 25139
                ZWave Controller: 25139

                1 Reply Last reply
                0
                • CatmanV2C Offline
                  CatmanV2C Offline
                  CatmanV2
                  wrote on last edited by
                  #23

                  I think the template is in the correct place. Let's see what happens when you restart Reactor

                  C

                  The Ex-Vera abuser know as CatmanV2.....

                  1 Reply Last reply
                  0
                  • toggledbitsT Away
                    toggledbitsT Away
                    toggledbits
                    wrote on last edited by
                    #24

                    @gwp1 Are you getting an error that the template owntracks_sensor doesn't exist?

                    Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                    G 1 Reply Last reply
                    0
                    • toggledbitsT toggledbits

                      @gwp1 Are you getting an error that the template owntracks_sensor doesn't exist?

                      G Offline
                      G Offline
                      gwp1
                      wrote on last edited by
                      #25

                      @toggledbits I am not receiving any errors.

                      08a4de13-3175-4d69-b492-4a98202b841f-image.png

                      Just not seeing anything populate the entity.

                      cef0bd91-1e63-4f77-ae2a-abb3d23ae390-image.png

                      Is it something to do with the entity name by any random chance?

                      *Hubitat C-7 2.4.1.177
                      *Proxmox VE v8, Beelink MiniPC 12GBs, SSD

                      *HASS 2025.6.0
                      w/ ZST10-700 fw 7.18.3

                      *Prod MSR in docker/portainer
                      MSR: latest-25139-fbd67abc
                      MQTTController: 25139
                      ZWave Controller: 25139

                      toggledbitsT 1 Reply Last reply
                      0
                      • G gwp1

                        @toggledbits I am not receiving any errors.

                        08a4de13-3175-4d69-b492-4a98202b841f-image.png

                        Just not seeing anything populate the entity.

                        cef0bd91-1e63-4f77-ae2a-abb3d23ae390-image.png

                        Is it something to do with the entity name by any random chance?

                        toggledbitsT Away
                        toggledbitsT Away
                        toggledbits
                        wrote on last edited by
                        #26

                        @gwp1 said in [MSR] reactor-mqtt-contrib package for additional MQTT templates:

                        @toggledbits I am not receiving any errors.

                        Then there's nothing wrong with uses_template.

                        I'll make the same comment/question to you that I made to @CatmanV2 earlier in this same thread: you're on the latest MQTTController, right?

                        Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                        G 1 Reply Last reply
                        0
                        • toggledbitsT toggledbits

                          @gwp1 said in [MSR] reactor-mqtt-contrib package for additional MQTT templates:

                          @toggledbits I am not receiving any errors.

                          Then there's nothing wrong with uses_template.

                          I'll make the same comment/question to you that I made to @CatmanV2 earlier in this same thread: you're on the latest MQTTController, right?

                          G Offline
                          G Offline
                          gwp1
                          wrote on last edited by gwp1
                          #27

                          @toggledbits MQTTController-22326 (double-checked the CHANGELOG.md)

                          EDIT: ...which I now see is a version behind. You snuck one in on me. Updating to MQTTController-22340.

                          EDIT2: Nailed it.
                          8009852f-2527-46c2-a2da-508b073c5dec-image.png

                          *Hubitat C-7 2.4.1.177
                          *Proxmox VE v8, Beelink MiniPC 12GBs, SSD

                          *HASS 2025.6.0
                          w/ ZST10-700 fw 7.18.3

                          *Prod MSR in docker/portainer
                          MSR: latest-25139-fbd67abc
                          MQTTController: 25139
                          ZWave Controller: 25139

                          G CatmanV2C 2 Replies Last reply
                          1
                          • G gwp1

                            @toggledbits MQTTController-22326 (double-checked the CHANGELOG.md)

                            EDIT: ...which I now see is a version behind. You snuck one in on me. Updating to MQTTController-22340.

                            EDIT2: Nailed it.
                            8009852f-2527-46c2-a2da-508b073c5dec-image.png

                            G Offline
                            G Offline
                            gwp1
                            wrote on last edited by
                            #28

                            @toggledbits @therealdb @CatmanV2 Thank you all for your help here, this is a big step in my system. Really appreciate it!

                            *Hubitat C-7 2.4.1.177
                            *Proxmox VE v8, Beelink MiniPC 12GBs, SSD

                            *HASS 2025.6.0
                            w/ ZST10-700 fw 7.18.3

                            *Prod MSR in docker/portainer
                            MSR: latest-25139-fbd67abc
                            MQTTController: 25139
                            ZWave Controller: 25139

                            1 Reply Last reply
                            2
                            • CatmanV2C Offline
                              CatmanV2C Offline
                              CatmanV2
                              wrote on last edited by
                              #29

                              @therealdb what are your updates set to on the iPhone app? The data is going to be useful, but on 'Significant' I appear to be only getting updates on
                              string and region which makes sense.
                              I'm assuming that battery_power.level won't update more frequently unless the app is configured to 'Move'

                              Has anyone done that? Does it kill the iPhone battery?

                              Cheers

                              C

                              The Ex-Vera abuser know as CatmanV2.....

                              1 Reply Last reply
                              0
                              • G gwp1

                                @toggledbits MQTTController-22326 (double-checked the CHANGELOG.md)

                                EDIT: ...which I now see is a version behind. You snuck one in on me. Updating to MQTTController-22340.

                                EDIT2: Nailed it.
                                8009852f-2527-46c2-a2da-508b073c5dec-image.png

                                CatmanV2C Offline
                                CatmanV2C Offline
                                CatmanV2
                                wrote on last edited by
                                #30

                                @gwp1 how did you get the Driving Flag?

                                Cheers

                                C

                                The Ex-Vera abuser know as CatmanV2.....

                                G 1 Reply Last reply
                                0
                                • CatmanV2C CatmanV2

                                  @gwp1 how did you get the Driving Flag?

                                  Cheers

                                  C

                                  G Offline
                                  G Offline
                                  gwp1
                                  wrote on last edited by gwp1
                                  #31

                                  @catmanv2 move translates to any movement your phone is making - increases accuracy but kills battery life. significant is defined by OwnTracks as "traveling a distance of at least 500 meters in 5 minutes" which lets the app nap and is much easier on the battery.

                                  Driving Flag is a virtual switch I created based on distance from Home. I believe I currently have it set to .1 mile so it trips as soon as I pull out of the neighborhood. I use it as a safety to the GPS reporting for when I'm not home. I have a second one called Driving Flag - Far Away that kicks in at two miles. This is for use when I'm obviously not just puttering about the neighborhood but going to be gone while. Can be used to trigger HVAC, etc.

                                  *Hubitat C-7 2.4.1.177
                                  *Proxmox VE v8, Beelink MiniPC 12GBs, SSD

                                  *HASS 2025.6.0
                                  w/ ZST10-700 fw 7.18.3

                                  *Prod MSR in docker/portainer
                                  MSR: latest-25139-fbd67abc
                                  MQTTController: 25139
                                  ZWave Controller: 25139

                                  1 Reply Last reply
                                  1
                                  • CatmanV2C Offline
                                    CatmanV2C Offline
                                    CatmanV2
                                    wrote on last edited by
                                    #32

                                    Cool, ta

                                    C

                                    The Ex-Vera abuser know as CatmanV2.....

                                    1 Reply Last reply
                                    0
                                    • toggledbitsT toggledbits

                                      Yes, your configuration of prefix and topic don't make a string that matches what is being received. Based on what it is coming in and how those fields template configuration are used, prefix should be msrmqtt and topic should be just iphone8.

                                      Conspicuous give-away: your test_iphone value doesn't appear in the topic or payload of what you're receiving.

                                      @therealdb this may need a bit more documentation, since the relevance of prefix and topic aren't immediately clear (at least, not to me) without looking at the template itself and seeing how they are used, and likely the phone configuration as well (i.e. describe how configuration fields on the phone may appear in the final event topic).

                                      therealdbT Offline
                                      therealdbT Offline
                                      therealdb
                                      wrote on last edited by
                                      #33

                                      @toggledbits said in [MSR] reactor-mqtt-contrib package for additional MQTT templates:

                                      @therealdb this may need a bit more documentation, since the relevance of prefix and topic aren't immediately clear (at least, not to me) without looking at the template itself and seeing how they are used, and likely the phone configuration as well (i.e. describe how configuration fields on the phone may appear in the final event topic).

                                      It’s in the readme. Maybe, when you’ll build an UI, we could provide descriptive text for parameters.

                                      --
                                      On a mission to automate everything.

                                      My MS Reactor contrib
                                      My Luup Plug-ins

                                      1 Reply Last reply
                                      0
                                      • therealdbT Offline
                                        therealdbT Offline
                                        therealdb
                                        wrote on last edited by therealdb
                                        #34

                                        Version 22350 released.
                                        What's new:

                                        • shelly_button1: for Shelly Button 1 (battery powered button) - all the button modes (short, long, double, triple) are supported.
                                        • fullykiosk: to handle messages coming from FullyKiosk. You'll have battery and charging status, screen brightness and current app.

                                        What's fixed:

                                        • query for all shelly template
                                        • owntracks: trying to better handle null values/spurious messages.

                                        How to update: just replace the files and restart Reactor.

                                        --
                                        On a mission to automate everything.

                                        My MS Reactor contrib
                                        My Luup Plug-ins

                                        G 2 Replies Last reply
                                        1
                                        • therealdbT therealdb

                                          Version 22350 released.
                                          What's new:

                                          • shelly_button1: for Shelly Button 1 (battery powered button) - all the button modes (short, long, double, triple) are supported.
                                          • fullykiosk: to handle messages coming from FullyKiosk. You'll have battery and charging status, screen brightness and current app.

                                          What's fixed:

                                          • query for all shelly template
                                          • owntracks: trying to better handle null values/spurious messages.

                                          How to update: just replace the files and restart Reactor.

                                          G Offline
                                          G Offline
                                          gwp1
                                          wrote on last edited by
                                          #35

                                          @therealdb I grabbed the latest owntracks_sensor and dropped it on top of the existing. (Yes, being late and I'm exhausted I failed to backup the original template.)

                                                  owntracks_iphone14p: #entity ID - must be unique
                                                    name: "iPhone14p J2A" # friendly name
                                                    prefix: "msrmqtt"
                                                    topic: "iphone14p-j2a"
                                                    uses_template: "owntracks_sensor"
                                                    homeRegionName: "Home"
                                          #
                                                  owntracks_iphone8: #entity ID - must be unique
                                                    name: "iPhone8 location" # friendly name
                                                    prefix: "msrmqtt"
                                                    topic: "iphone8-j2a"
                                                    uses_template: "owntracks_sensor"
                                                    homeRegionName: "Home"
                                          #
                                                  owntracks_iphone14jay: #entity ID - must be unique
                                                    name: "iPhone14max Jay" # friendly name
                                                    prefix: "msrmqtt"
                                                    topic: "iphone14max-jay"
                                                    uses_template: "owntracks_sensor"
                                                    homeRegionName: "CoralBerry"
                                          #
                                                  owntracks_iphone14jen: #entity ID - must be unique
                                                    name: "iPhone14 Jen" # friendly name
                                                    prefix: "msrmqtt"
                                                    topic: "iphone14-jen"
                                                    uses_template: "owntracks_sensor"
                                                    homeRegionName: "CoralBerry"
                                          #
                                                  owntracks_iphone14addie: #entity ID - must be unique
                                                    name: "iPhone14 Addie" # friendly name
                                                    prefix: "msrmqtt"
                                                    topic: "iphone14-addie"
                                                    uses_template: "owntracks_sensor"
                                                    homeRegionName: "CoralBerry"
                                          #
                                                  owntracks_iphone14bella: #entity ID - must be unique
                                                    name: "iPhone14 Bella" # friendly name
                                                    prefix: "msrmqtt"
                                                    topic: "iphone14-bella"
                                                    uses_template: "owntracks_sensor"
                                                    homeRegionName: "CoralBerry"
                                          

                                          That's my config... and this is my log since replacing/restarting:

                                               ... le" content="{"groups": [], "environmentKey" ... 
                                                                                   ^ [-]
                                          [latest-22349]2022-12-19T04:51:40.735Z <MQTTController:CRIT> YAMLException: end of the stream or a document separator is expected at line 21, column 66:
                                               ... le" content="{&quot;groups&quot;: [], &quot;environmentKey&quot; ... 
                                                                                   ^ [-]
                                          YAMLException: end of the stream or a document separator is expected at line 21, column 66:
                                               ... le" content="{&quot;groups&quot;: [], &quot;environmentKey&quot; ... 
                                                                                   ^
                                              at generateError (/home/reactor/Documents/reactor/node_modules/js-yaml/lib/js-yaml/loader.js:167:10)
                                              at throwError (/home/reactor/Documents/reactor/node_modules/js-yaml/lib/js-yaml/loader.js:173:9)
                                              at readDocument (/home/reactor/Documents/reactor/node_modules/js-yaml/lib/js-yaml/loader.js:1545:5)
                                              at loadDocuments (/home/reactor/Documents/reactor/node_modules/js-yaml/lib/js-yaml/loader.js:1588:5)
                                              at load (/home/reactor/Documents/reactor/node_modules/js-yaml/lib/js-yaml/loader.js:1614:19)
                                              at Object.safeLoad (/home/reactor/Documents/reactor/node_modules/js-yaml/lib/js-yaml/loader.js:1637:10)
                                              at MQTTController._load_implementation (/home/reactor/Documents/reactor/ext/MQTTController/MQTTController.js:753:38)
                                              at async MQTTController.start (/home/reactor/Documents/reactor/ext/MQTTController/MQTTController.js:81:13)
                                          [latest-22349]2022-12-19T04:51:40.744Z <MQTTController:ERR> MQTTController#mqtt2 can't read/load templates from /home/reactor/Documents/reactor/config/mqtt_templates/owntracks_sensor.yaml: [YAMLException] end of the stream or a document separator is expected at line 21, column 66:
                                               ... le" content="{&quot;groups&quot;: [], &quot;environmentKey&quot; ... 
                                                                                   ^ [-]
                                          [latest-22349]2022-12-19T04:51:40.754Z <MQTTController:CRIT> YAMLException: end of the stream or a document separator is expected at line 21, column 66:
                                               ... le" content="{&quot;groups&quot;: [], &quot;environmentKey&quot; ... 
                                                                                   ^ [-]
                                          YAMLException: end of the stream or a document separator is expected at line 21, column 66:
                                               ... le" content="{&quot;groups&quot;: [], &quot;environmentKey&quot; ... 
                                                                                   ^
                                              at generateError (/home/reactor/Documents/reactor/node_modules/js-yaml/lib/js-yaml/loader.js:167:10)
                                              at throwError (/home/reactor/Documents/reactor/node_modules/js-yaml/lib/js-yaml/loader.js:173:9)
                                              at readDocument (/home/reactor/Documents/reactor/node_modules/js-yaml/lib/js-yaml/loader.js:1545:5)
                                              at loadDocuments (/home/reactor/Documents/reactor/node_modules/js-yaml/lib/js-yaml/loader.js:1588:5)
                                              at load (/home/reactor/Documents/reactor/node_modules/js-yaml/lib/js-yaml/loader.js:1614:19)
                                              at Object.safeLoad (/home/reactor/Documents/reactor/node_modules/js-yaml/lib/js-yaml/loader.js:1637:10)
                                              at MQTTController._load_implementation (/home/reactor/Documents/reactor/ext/MQTTController/MQTTController.js:753:38)
                                              at async MQTTController.start (/home/reactor/Documents/reactor/ext/MQTTController/MQTTController.js:81:13)
                                          [latest-22349]2022-12-19T04:51:40.759Z <HassController:NOTICE> HassController#hass connecting to ws://192.168.1.198:8123/api/websocket
                                          [latest-22349]2022-12-19T04:51:40.766Z <MQTTController:INFO> MQTTController#mqtt instance topic ident is mqtt
                                          [latest-22349]2022-12-19T04:51:40.767Z <Controller:INFO> MQTTController#mqtt 0 dead entities older than 86400000s purged
                                          [latest-22349]2022-12-19T04:51:40.769Z <MQTTController:NOTICE> MQTTController#mqtt connecting to broker at mqtt://192.168.1.198:1883/
                                          [latest-22349]2022-12-19T04:51:40.843Z <MQTTController:INFO> MQTTController#mqtt2 instance topic ident is mqtt2
                                          [latest-22349]2022-12-19T04:51:40.844Z <MQTTController:ERR> MQTTController#mqtt2 entity owntracks_iphone14p uses_template=owntracks_sensor, template not defined
                                          [latest-22349]2022-12-19T04:51:40.853Z <MQTTController:ERR> MQTTController#mqtt2 entity owntracks_iphone8 uses_template=owntracks_sensor, template not defined
                                          [latest-22349]2022-12-19T04:51:40.890Z <MQTTController:ERR> MQTTController#mqtt2 entity owntracks_iphone14jay uses_template=owntracks_sensor, template not defined
                                          [latest-22349]2022-12-19T04:51:40.901Z <MQTTController:ERR> MQTTController#mqtt2 entity owntracks_iphone14jen uses_template=owntracks_sensor, template not defined
                                          [latest-22349]2022-12-19T04:51:40.914Z <MQTTController:ERR> MQTTController#mqtt2 entity owntracks_iphone14addie uses_template=owntracks_sensor, template not defined
                                          [latest-22349]2022-12-19T04:51:40.923Z <MQTTController:ERR> MQTTController#mqtt2 entity owntracks_iphone14bella uses_template=owntracks_sensor, template not defined
                                          [latest-22349]2022-12-19T04:51:40.944Z <MQTTController:NOTICE> MQTTController#mqtt2 device owntracks_iphone14addie no longer available, marking BinarySensor#mqtt2>owntracks_iphone14addie for removal
                                          [latest-22349]2022-12-19T04:51:40.952Z <MQTTController:NOTICE> MQTTController#mqtt2 device owntracks_iphone14bella no longer available, marking BinarySensor#mqtt2>owntracks_iphone14bella for removal
                                          [latest-22349]2022-12-19T04:51:40.960Z <MQTTController:NOTICE> MQTTController#mqtt2 device owntracks_iphone14jay no longer available, marking BinarySensor#mqtt2>owntracks_iphone14jay for removal
                                          [latest-22349]2022-12-19T04:51:40.967Z <MQTTController:NOTICE> MQTTController#mqtt2 device owntracks_iphone14jen no longer available, marking BinarySensor#mqtt2>owntracks_iphone14jen for removal
                                          [latest-22349]2022-12-19T04:51:40.974Z <MQTTController:NOTICE> MQTTController#mqtt2 device owntracks_iphone14p no longer available, marking BinarySensor#mqtt2>owntracks_iphone14p for removal
                                          [latest-22349]2022-12-19T04:51:40.980Z <MQTTController:NOTICE> MQTTController#mqtt2 device owntracks_iphone8 no longer available, marking BinarySensor#mqtt2>owntracks_iphone8 for removal
                                          [latest-22349]2022-12-19T04:51:40.987Z <Controller:INFO> MQTTController#mqtt2 0 dead entities older than 86400000s purged
                                          [latest-22349]2022-12-19T04:51:40.988Z <MQTTController:NOTICE> MQTTController#mqtt2 connecting to broker at mqtts://7ef71f0117fe40d28c2df12205c4a0d0.s2.eu.hivemq.cloud:8883
                                          

                                          *Hubitat C-7 2.4.1.177
                                          *Proxmox VE v8, Beelink MiniPC 12GBs, SSD

                                          *HASS 2025.6.0
                                          w/ ZST10-700 fw 7.18.3

                                          *Prod MSR in docker/portainer
                                          MSR: latest-25139-fbd67abc
                                          MQTTController: 25139
                                          ZWave Controller: 25139

                                          1 Reply Last reply
                                          0
                                          Reply
                                          • Reply as topic
                                          Log in to reply
                                          • Oldest to Newest
                                          • Newest to Oldest
                                          • Most Votes


                                          Recent Topics

                                          • Gradually turn on lights.
                                            G
                                            gwp1
                                            0
                                            4
                                            132

                                          • Stop the MSR by an external switch on Hubitat.
                                            wmarcolinW
                                            wmarcolin
                                            0
                                            1
                                            30

                                          • Error After Upgrade
                                            G
                                            gwp1
                                            0
                                            4
                                            103

                                          • Reset attribute value of entity in event handler
                                            R
                                            RHCPNG
                                            0
                                            5
                                            201

                                          • Need help figuring out how to delay a reset on reaction
                                            G
                                            gwp1
                                            0
                                            22
                                            925

                                          • Way to search for rules (rule state) in other rules
                                            T
                                            tamorgen
                                            0
                                            3
                                            99

                                          • Links to MSR from HA
                                            Tom_DT
                                            Tom_D
                                            0
                                            1
                                            90

                                          • Set Reaction > Script Action
                                            wmarcolinW
                                            wmarcolin
                                            0
                                            11
                                            433

                                          • Wiring Samotech SM308-S into light fitting
                                            akbooerA
                                            akbooer
                                            0
                                            2
                                            146

                                          • Errors after updating to MQTTController build 25139
                                            toggledbitsT
                                            toggledbits
                                            0
                                            6
                                            236

                                          • 🎉 My very first MSR controller: OpenSprinkler
                                            therealdbT
                                            therealdb
                                            5
                                            13
                                            917

                                          • Advice reqeusted to migrate MSR from Bare Metal to Container
                                            T
                                            tamorgen
                                            0
                                            5
                                            260
                                          Powered by NodeBB | Contributors
                                          Hosted freely by 10RUPTiV - Solutions Technologiques | Contact us
                                          • Login

                                          • Don't have an account? Register

                                          • Login or register to search.
                                          • First post
                                            Last post
                                          0
                                          • Categories
                                          • Recent
                                          • Tags
                                          • Popular
                                          • Unsolved