Skip to content
  • Categories
  • Recent
  • Tags
  • Popular
  • Unsolved
Collapse
Discussion Forum to share and further the development of home control and automation, independent of platforms.
  1. Home
  2. Software
  3. Multi-System Reactor
  4. MSR thinks all my Ezlo Controller devices no longer exist, they do !
[Reactor] Help with screne controller cycling logic
therealdbT
I’ve added a couple of Shelly Wave i4 as scene controllers and I’m planning to add more, since I can just use standard buttons instead of battery-powered scene controllers, which also looks better aesthetically. That said, I’m struggling to figure out how to write a simple rule that cycles between states every time I press a button. Example: Light 1 ON → OFF, then Light 2 ON → OFF. The part I can’t get right is handling the case where Light 1 or Light 2 might already be ON independently of the rule. Maybe it’s just too much sun and relaxation clouding my brain, but any hint would be appreciated.
Multi-System Reactor
Stop the MSR by an external switch on Hubitat.
wmarcolinW
Use case: When performing home maintenance, such as air conditioning, I want all rules involving air conditioning to be disabled. To do this, to day, I have a virtual switch that I placed within all rules involving air conditioning, meaning that if I turn it off, none of them work. Then another situation: the water pump system and garden irrigation, another switch. In short, I had to create several virtual switches in Hubitat to disable rules in MSR. Unfortunately, however, I was unable to cover all scenarios, so I wondered if it would be possible for MSR to support a virtual MSR switch, which, when configured in the reactor settings, would function as a general on/off switch for MSR. If it is configured and turned off, the entire rules and actions in MSR stops working, except for the status change reading process, specifically for this switch, which, when turned on, would restart the MSR. Would it be possible to do something like this? Any recommendations from the experts?
Multi-System Reactor
[Reactor] Variables not updating correctly in latest-25201-2aa18550
therealdbT
Topic thumbnail image
Multi-System Reactor
Expose MSR entities
CatmanV2C
Probably a really dumb question. Currently I am using the owntracks_sensor for tracking phones being in region in MSR and it works great. Digging around with Home Assistant and toying with some dashboards, is there any way of exposing that sensor to HA trivially? I could set MSR to trip a virtual switch in OpenLuup which can then be exposed to HA (with all my other Vera devices) but that feels a bit in-elegant if I can do it directly. Any thoughts? Apologies if the ask is not clear/ TIA C
Multi-System Reactor
Comment in Globa Expressions
Tom_DT
I have several Global Expressions that are set by a rule so the definition area is blank. I'd like to add a comment in this area that explains what is setting the value. Commenting in this area breaks the remote setting. Any way to document what is setting the GE?
Multi-System Reactor
Unofficial thread for compatibility
tunnusT
As there are statements about compatibility for home assistant versions in MSR new version announcements (e.g. "HassController: Bless Hass to 2025.7.3"), I thought it would be good idea to track other controllers as well. As an example, I can confirm that build "latest-25208-c53e8513" works with Hubitat Elevation C-8 platform version 2.4.2.134 using Maker API.
Multi-System Reactor
Gradually turn on lights.
Tom_DT
I have several lights that I would like to turn on very gradually over 15 or 20 seconds. from 0 to .25 in .01 increments. I have tried a few things that came nowhere near working, so here I am.
Multi-System Reactor
Reactor (Multi-System/Multi-Hub) Announcements
toggledbitsT
Build 21228 has been released. Docker images available from DockerHub as usual, and bare-metal packages here. Home Assistant up to version 2021.8.6 supported; the online version of the manual will now state the current supported versions; Fix an error in OWMWeatherController that could cause it to stop updating; Unify the approach to entity filtering on all hub interface classes (controllers); this works for device entities only; it may be extended to other entities later; Improve error detail in messages for EzloController during auth phase; Add isRuleSet() and isRuleEnabled() functions to expressions extensions; Implement set action for lock and passage capabilities (makes them more easily scriptable in some cases); Fix a place in the UI where 24-hour time was not being displayed.
Multi-System Reactor
Can't customize home page
G
I foolishly let my system wipe all cookies this morning and with it my settings for my MSR home page. Once logged back in I can no longer remove errant panes nor is the + available to add new ones. Brave Browser v1.80.122 (Jul 16, 2025) What have I done?! Will check other browsers on my M1. UPDATE: Safari exhibits same behaviour. I've tried both sans last-four public key entry and with - no change.
Multi-System Reactor
Error After Upgrade
T
Topic thumbnail image
Multi-System Reactor
Reset attribute value of entity in event handler
R
Topic thumbnail image
Multi-System Reactor
Need help figuring out how to delay a reset on reaction
T
Topic thumbnail image
Multi-System Reactor
Way to search for rules (rule state) in other rules
T
@toggledbits, not sure if this is a feature request or I'm using the search tool wrong. You have a "Search for rule" in the Rules Set tab in MSR. It works nicely to find a rule and bring up said rule, but can it/could it be used for as a "where used?" global search? For instance, I have a fairly large set of rules, divided up into 10 different rulesets. There's easily a hundred individual rules, and many of the rules have Rule State triggers, which of course refer to other rules. Amongst my troubleshooting today, I came across what may have been a duplicate or troubleshooting attempt, but I can't tell if it's actually used as a Rule State in another rule without opening each rule that I suspect it may be a part of. Thanks.
Multi-System Reactor
Links to MSR from HA
Tom_DT
I am using Home Assistant a lot recently. On a dashboard showing the devices, I would like to show a link to the MSR rule that controls the devices. Is there a way to link directly into MSR?
Multi-System Reactor
Set Reaction > Script Action
wmarcolinW
Topic thumbnail image
Multi-System Reactor
Errors after updating to MQTTController build 25139
tunnusT
I'm running MSR build 25139 on Docker, using MQTT controller 24293, and everything working as expected. But if I try to upgrade to MQTTController build 25139, I'm getting the following errors on MSR UI: An Entity Attribute condition in "Lay-Z-Spa auto heating off" (Terrace) failed because the referenced entity "Lay-Z-Spa States" (mqtt>layzspa_states) does not have attribute value_sensor.god Last 11:20:37 An Entity Attribute condition in "Lay-Z-Spa auto heating off" (Terrace) failed because the referenced entity "Lay-Z-Spa States" (mqtt>layzspa_states) does not have attribute temperature_sensor.green Last 11:20:37 An Entity Attribute condition in "Lay-Z-Spa filter pump auto off" (Terrace) failed because the referenced entity "Lay-Z-Spa States" (mqtt>layzspa_states) does not have attribute temperature_sensor.red Last 11:20:37 An Entity Attribute condition in "Lay-Z-Spa filter pump auto run" (Terrace) failed because the referenced entity "Lay-Z-Spa States" (mqtt>layzspa_states) does not have attribute value_sensor.pump Last 11:20:37 An Entity Attribute condition in "Lay-Z-Spa watchdog" (Terrace) failed because the referenced entity "Lay-Z-Spa States" (mqtt>layzspa_states) does not have attribute value_sensor.status Last 11:20:37 My MQTT configuration (local_mqtt_devices.yaml) for the related entity is: layzspa_message: type: ValueSensor capabilities: ["temperature_sensor", "value_sensor", "power_sensor"] primary_attribute: power_sensor.value events: "layzspa/message": "power_sensor.value": json_payload: true if_expr: '! isnull( payload?.PWR )' expr: "float(payload.PWR)" "value_sensor.air": json_payload: true if_expr: '! isnull( payload?.AIR )' expr: "float(payload.AIR)" "value_sensor.pump": json_payload: true if_expr: '! isnull( payload?.FLT )' expr: "float(payload.FLT)" "value_sensor.god": json_payload: true if_expr: '! isnull( payload?.GOD )' expr: "float(payload.GOD)" "value_sensor.lock": json_payload: true if_expr: '! isnull( payload?.LCK )' expr: "float(payload.LCK)" "value_sensor.unit": json_payload: true if_expr: '! isnull( payload?.UNT )' expr: "float(payload.UNT)" "value_sensor.error": json_payload: true if_expr: '! isnull( payload?.ERR )' expr: "float(payload.ERR)" "temperature_sensor.green": json_payload: true if_expr: '! isnull( payload?.GRN )' expr: "float(payload.GRN)" "temperature_sensor.red": json_payload: true if_expr: '! isnull( payload?.RED )' expr: "float(payload.RED)" "temperature_sensor.target": json_payload: true if_expr: '! isnull( payload?.TGT )' expr: "float(payload.TGT)" "temperature_sensor.value": json_payload: true if_expr: '! isnull( payload?.TMP )' expr: "float(payload.TMP)" "temperature_sensor.virtual": json_payload: true if_expr: '! isnull( payload?.VTM )' expr: "round(float(payload.VTM), 1)" "temperature_sensor.ambient": json_payload: true if_expr: '! isnull( payload?.AMB )' expr: "float(payload.AMB)" "layzspa/Status": "value_sensor.status": if_expr: '! isnull( payload )' expr: "payload" "layzspa/button": "value_sensor.button": if_expr: '! isnull( payload )' expr: "payload" and in reactor.yaml I have: "layzspa_states": name: "Lay-Z-Spa States" friendly_name: 'Lay-Z-Spa States' include: layzspa_message I realize my MQTT configuration might be a bit unorthodox, but could there still be something unintentional in the latest MQTTController build? If needed, I can provide detailed logs.
Multi-System Reactor
🎉 My very first MSR controller: OpenSprinkler
therealdbT
Since today is my birthday - and I still pretend to be unconventional - I'm giving away a present to this wonderful community and I'm releasing my first OpenSprinkler controller for MSR. It was real fun to code it - and while it's still WIP, it seems to work OK for me. It's polling-based at the moment, but I'll add support for updates via MQTT very soon (it's already partially coded). Get it at (install is similar to MQTTController and such): https://github.com/dbochicchio/reactor-opensprinkler Feel free to try it. It's beta software, but it's stable. I'll update it weekly until all the tasks from my todo list are empty. Since I've learnt a lot from this controller, I'll explore new controllers soon.
Multi-System Reactor
Advice reqeusted to migrate MSR from Bare Metal to Container
T
Good day all, I'm in the process of trying to shut down my 10 year old Linux home server that served many purposes, but primarily it's what I used for my NAS/Plex Media server. I migrated the NAS aspect of the server in November of last year to a true NAS solution (Ubiquti UNAS Pro), which is rack mount and much more efficient than my old tower, which it's only side benefit was heating my home office during the winter. Unfortunately it also means heating my home office during the summer, which were about to be in full swing. I have two things running on this 10 year old server at this point. MSR and pi-hole. I'm running Plex Media Server on Fedora Workstation in Podman on mini PC, which is much more energy efficient than my old tower. My next step is to migrate MSR. I know there are images of MSR out there, and creating it is well documented. I'm going to be using Podman instead of Docker for various reasons, but they work very similar. What I don't know, is what I need to do to migrate my existing Bare Metal installation over to a container. Has anyone done this? Any advice?
Multi-System Reactor
Can´t restart or upgrade/deploy MSR
F
Topic thumbnail image
Multi-System Reactor
[Solved] Limit HA Entity in MSR
wmarcolinW
Topic thumbnail image
Multi-System Reactor

MSR thinks all my Ezlo Controller devices no longer exist, they do !

Scheduled Pinned Locked Moved Multi-System Reactor
7 Posts 5 Posters 433 Views 5 Watching
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • cw-kidC Offline
    cw-kidC Offline
    cw-kid
    wrote on last edited by cw-kid
    #1

    Hi

    Today in MSR alerts I see 100 alerts saying that the devices on my Ezlo controllers no longer exist.

    They do still exist. I checked some of these devices in the Ezlo Online API Tool doing a hub.devices.list query.

    I then checked that the ID numbers were the same for the devices and they are the same device ID's still.

    So my devices do still exist with the same device ID's it seems.

    So not sure why MSR has over 100 alerts saying otherwise.

    9d7c4732-40f3-4551-b8d4-e24e0e8dda10-image.png

    I then looked in Entities selected my Ezlo Plus controller and it listed all my devices OK I think and nothing looked out of place.

    Thanks

    1 Reply Last reply
    0
    • CatmanV2C Offline
      CatmanV2C Offline
      CatmanV2
      wrote on last edited by CatmanV2
      #2

      Have you made any changes to MSR or your Ezlo config?

      <edit> I missed the bit where they were all back!

      C

      The Ex-Vera abuser know as CatmanV2.....

      1 Reply Last reply
      0
      • toggledbitsT Away
        toggledbitsT Away
        toggledbits
        wrote on last edited by
        #3

        It's Ezlo. Anything is possible. Most likely, a momentary hiccup in either the hub (did it self-update?) or their cloud caused the inventory report to come back empty, maybe the hub (or their cloud) wasn't fully ready at the moment of the query. In fact, this kind of behavior is one of reasons MSR doesn't instantly delete a device that is no longer reported in the hub's inventory — all interfaces now have a grace period wherein a device can be restored. Anyway, if the Entities list shows all the devices now, clear the warnings and soldier on.

        Also please make sure you've looked at (and preferably captured/saved) the log files when asking questions like this (and of course, posting any potentially relevant findings). IMO, any post that doesn't say you've looked at the logs isn't meeting the posting guidelines/doing the homework.

        Oh, and I'll take this moment to acknowledge that in a couple of days the Vera community will mark five years since Ezlo announced that it acquired Vera.

        Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

        PablaP 1 Reply Last reply
        2
        • CatmanV2C Offline
          CatmanV2C Offline
          CatmanV2
          wrote on last edited by
          #4

          Are they out of beta, yet?

          C

          The Ex-Vera abuser know as CatmanV2.....

          1 Reply Last reply
          1
          • toggledbitsT toggledbits

            It's Ezlo. Anything is possible. Most likely, a momentary hiccup in either the hub (did it self-update?) or their cloud caused the inventory report to come back empty, maybe the hub (or their cloud) wasn't fully ready at the moment of the query. In fact, this kind of behavior is one of reasons MSR doesn't instantly delete a device that is no longer reported in the hub's inventory — all interfaces now have a grace period wherein a device can be restored. Anyway, if the Entities list shows all the devices now, clear the warnings and soldier on.

            Also please make sure you've looked at (and preferably captured/saved) the log files when asking questions like this (and of course, posting any potentially relevant findings). IMO, any post that doesn't say you've looked at the logs isn't meeting the posting guidelines/doing the homework.

            Oh, and I'll take this moment to acknowledge that in a couple of days the Vera community will mark five years since Ezlo announced that it acquired Vera.

            PablaP Offline
            PablaP Offline
            Pabla
            wrote on last edited by
            #5

            @toggledbits said in MSR thinks all my Ezlo Controller devices no longer exist, they do !:

            Oh, and I'll take this moment to acknowledge that in a couple of days the Vera community will mark five years since Ezlo announced that it acquired Vera.

            I am so happy I jumped ship from Ezlo/Vera to Home Assistant. Ezlo is soooooo many years behind its an absolute joke

            1 Reply Last reply
            1
            • CatmanV2C Offline
              CatmanV2C Offline
              CatmanV2
              wrote on last edited by
              #6

              I am quite amazed by HA. Although in some measure disturbed that my printer is broadcasting ink levels (for example). Plus there are some odd things that it detects (Linn Home) where I have no Linn gear at all.
              But otherwise loving it! Especially with MSR

              The Ex-Vera abuser know as CatmanV2.....

              G 1 Reply Last reply
              2
              • CatmanV2C CatmanV2

                I am quite amazed by HA. Although in some measure disturbed that my printer is broadcasting ink levels (for example). Plus there are some odd things that it detects (Linn Home) where I have no Linn gear at all.
                But otherwise loving it! Especially with MSR

                G Offline
                G Offline
                gwp1
                wrote on last edited by
                #7

                @CatmanV2 HA has matured nicely over the past couple years.

                *Hubitat C-7 2.4.2.129
                *Proxmox VE v8, Beelink MiniPC 12GBs, SSD

                *HASS 2025.7.2
                w/ ZST10-700 fw 7.18.3

                *Prod MSR in docker/portainer
                MSR: latest-25139-fbd67abc
                MQTTController: 25139
                ZWave Controller: 25139

                1 Reply Last reply
                2
                • toggledbitsT toggledbits locked this topic on
                Reply
                • Reply as topic
                Log in to reply
                • Oldest to Newest
                • Newest to Oldest
                • Most Votes


                Recent Topics

                • [Reactor] Help with screne controller cycling logic
                  therealdbT
                  therealdb
                  0
                  3
                  30

                • Stop the MSR by an external switch on Hubitat.
                  wmarcolinW
                  wmarcolin
                  0
                  4
                  164

                • [Reactor] Variables not updating correctly in latest-25201-2aa18550
                  tunnusT
                  tunnus
                  0
                  22
                  557

                • Expose MSR entities
                  CatmanV2C
                  CatmanV2
                  0
                  11
                  105

                • Comment in Globa Expressions
                  CrilleC
                  Crille
                  1
                  2
                  76

                • Little Bobby tables...
                  CatmanV2C
                  CatmanV2
                  0
                  3
                  95

                • Home Assistant Voice TTS is Easy
                  CatmanV2C
                  CatmanV2
                  0
                  3
                  144

                • Play Audio through Home Assistant Voice Unit
                  toggledbitsT
                  toggledbits
                  1
                  1
                  91

                • Home Assistant Voice
                  CatmanV2C
                  CatmanV2
                  0
                  21
                  720

                • Unofficial thread for compatibility
                  tunnusT
                  tunnus
                  2
                  1
                  100

                • Gradually turn on lights.
                  toggledbitsT
                  toggledbits
                  0
                  21
                  961

                • Reactor (Multi-System/Multi-Hub) Announcements
                  toggledbitsT
                  toggledbits
                  5
                  123
                  56.0k
                Powered by NodeBB | Contributors
                Hosted freely by 10RUPTiV - Solutions Technologiques | Contact us
                • Login

                • Don't have an account? Register

                • Login or register to search.
                • First post
                  Last post
                0
                • Categories
                • Recent
                • Tags
                • Popular
                • Unsolved