Skip to content
  • Categories
  • Recent
  • Tags
  • Popular
  • Unsolved
Collapse
Discussion Forum to share and further the development of home control and automation, independent of platforms.
  1. Home
  2. Software
  3. Multi-System Reactor
  4. Replacing SiteSensor Plugin (Vera) with MSR
Advice reqeusted to migrate MSR from Bare Metal to Container
T
Good day all, I'm in the process of trying to shut down my 10 year old Linux home server that served many purposes, but primarily it's what I used for my NAS/Plex Media server. I migrated the NAS aspect of the server in November of last year to a true NAS solution (Ubiquti UNAS Pro), which is rack mount and much more efficient than my old tower, which it's only side benefit was heating my home office during the winter. Unfortunately it also means heating my home office during the summer, which were about to be in full swing. I have two things running on this 10 year old server at this point. MSR and pi-hole. I'm running Plex Media Server on Fedora Workstation in Podman on mini PC, which is much more energy efficient than my old tower. My next step is to migrate MSR. I know there are images of MSR out there, and creating it is well documented. I'm going to be using Podman instead of Docker for various reasons, but they work very similar. What I don't know, is what I need to do to migrate my existing Bare Metal installation over to a container. Has anyone done this? Any advice?
Multi-System Reactor
Reactor (Multi-System/Multi-Hub) Announcements
toggledbitsT
Build 21228 has been released. Docker images available from DockerHub as usual, and bare-metal packages here. Home Assistant up to version 2021.8.6 supported; the online version of the manual will now state the current supported versions; Fix an error in OWMWeatherController that could cause it to stop updating; Unify the approach to entity filtering on all hub interface classes (controllers); this works for device entities only; it may be extended to other entities later; Improve error detail in messages for EzloController during auth phase; Add isRuleSet() and isRuleEnabled() functions to expressions extensions; Implement set action for lock and passage capabilities (makes them more easily scriptable in some cases); Fix a place in the UI where 24-hour time was not being displayed.
Multi-System Reactor
Can´t restart or upgrade/deploy MSR
F
Topic thumbnail image
Multi-System Reactor
[Solved] Limit HA Entity in MSR
wmarcolinW
Topic thumbnail image
Multi-System Reactor
Organizing/ structuring rule sets and rules
R
Hi guys, Just wondering how you guys organize your rule sets and rules. I wish I had an extra layer to have some more granularity, but my feature request was not popular. Maybe there are better ways to organize my rule sets. I use the rule sets now primarily for rooms. So a rule set per room. But maybe grouping by functionality works better. Any examples/ suggestions would be appreciated.
Multi-System Reactor
Moving MSR from a QNAP container to RP 5 - some issues
Tom_DT
Topic thumbnail image
Multi-System Reactor
Widget deletion does not work and landing page (status) is empy
M
Topic thumbnail image
Multi-System Reactor
Need help reducing false positive notifications
T
Topic thumbnail image
Multi-System Reactor
Deleting widgets
tunnusT
Hopefully a trivial question, but how do you delete widgets in a status page? Using build 22266
Multi-System Reactor
MQTT configuration question
tunnusT
I have the following yaml configuration in local_mqtt_devices file x_mqtt_device: set_speed: arguments: speed: type: str topic: "command/%friendly_name%" payload: type: json expr: '{ "fan": parameters.speed }' While this works fine, I'm wondering how this could be changed to "fixed" parameters, as in this case "fan" only accepts "A", "Q" or a numeric value of 1-5?
Multi-System Reactor
System Configuration Check - time is offset
F
Hi! I get this message when I'm on the status tab: System Configuration Check The time on this system and on the Reactor host are significantly different. This may be due to incorrect system configuration on either or both. Please check the configuration of both systems. The host reports 2025-04-01T15:29:29.252Z; browser reports 2025-04-01T15:29:40.528Z; difference 11.276 seconds. I have MSR installed as a docker on my Home Assistant Blue / Hardkernel ODROID-N2/N2+. MSR version is latest-25082-3c348de6. HA versions are: Core 2025.3.4 Supervisor 2025.03.4 Operating System 15.1 I have restarted HA as well as MSR multiple times. This message didn´t show two weeks ago. Don´t know if it have anything to do with the latest MSR version. Do anyone know what I can try? Thanks in advance! Let's Be Careful Out There (Hill Street reference...) /Fanan
Multi-System Reactor
Programmatically capture HTTP Request action status code or error
therealdbT
I have a very strange situation, where if InfluxDB restarts, other containers may fail when restarting at the same time (under not easy to understand circumstances), and InfluxDB remains unreachable (and these containers crashes). I need to reboot these containers in an exact order, after rebooting InfluxDB. While I understand what's going on, I need a way to reliable determine that InfluxDB is not reachable and these containers are not reachable, in order to identify this situation and manually check what's going on - and, maybe, in the future, automatically restart them if needed. So, I was looking at HTTP Request action, but I need to capture the HTTP response code, instead of the response (becase if ping is OK, InfluxDB will reply with a 204), and, potentially, a way to programmatically detect that it's failing to get the response. While I could write a custom HTTP controller for this or a custom HTTP virtual device, I was wondering if this is somewhat on you roadmap @toggledbits Thanks!
Multi-System Reactor
ZwaveJSUI - RGBWW BULB - Warm/Cold White interfered with RGB settings - Bulb doesn't change color if in WarmWhite state.
N
Hi , I'm on -Reactor (Multi-hub) latest-25067-62e21a2d -Docker on Synology NAS -ZWaveJSUI 9.31.0.6c80945 Problem with ZwaveJSUI: When I try to change color to a bulb RGBWW, it doesn't change to the RGB color and the bulb remains warm or cold white. I tryed with Zipato RGBW Bulb V2 RGBWE2, Hank Bulb HKZW-RGB01, Aentec 6 A-ZWA002, so seems that it happens with all RGBWW bulb with reactor/zwavejsui. I'm using from reator the entity action: "rgb_color.set" and "rgb_color.set_rgb". After I send the reactor command, It changes in zwavejsui the rgb settings but doesn't put the white channel to "0", so the prevalent channel remains warm/cold White and the bulb doesn't change into the rgb color. This is the status of the bulb in zwavejsui after "rgb_color.set" (235,33,33,) and the bulb is still warmWhite. x_zwave_values.Color_Switch_currentColor={"warmWhite":204,"coldWhite":0,"red":235,"green":33,"blue":33} The "cold white" and "warm white" settings interfer with the rgb color settings. Reactor can change bulb colors with rgb_color set — (value, ui8, 0x000000 to 0xffffff) or rgb_color set_rgb — (red, green, blue, all ui1, 0 to 255) but if warm or cold white are not to "0", zwavejsui doesn't change them and I can't find a way to change into rgb or from rgb back to warm white. So if I use from reactor: rgb_color set_rgb — (235,33,33) in zwavejsui I have x_zwave_values.Color_Switch_targetColor={"red":235,"green":33,"blue":33} 14/03/2025, 16:43:57 - value updated Arg 0: └─commandClassName: Color Switch └─commandClass: 51 └─property: targetColor └─endpoint: 0 └─newValue └──red: 235 └──green: 33 └──blue: 33 └─prevValue └──red: 235 └──green: 33 └──blue: 33 └─propertyName: targetColor 14/03/2025, 16:43:57 - value updated Arg 0: └─commandClassName: Color Switch └─commandClass: 51 └─property: currentColor └─endpoint: 0 └─newValue └──warmWhite: 204 └──coldWhite: 0 └──red: 235 └──green: 33 └──blue: 33 └─prevValue └──warmWhite: 204 └──coldWhite: 0 └──red: 235 └──green: 33 └──blue: 33 └─propertyName: currentColor In zwavejsui, the bulb changes rgb set but warm White remains to "204" and the bulb remais on warm White channel bacause is prevalent on rgb set. x_zwave_values.Color_Switch_currentColor_0=204 x_zwave_values.Color_Switch_currentColor_1=0 x_zwave_values.Color_Switch_currentColor_2=235 x_zwave_values.Color_Switch_currentColor_3=33 x_zwave_values.Color_Switch_currentColor_4=33 Is it possible to targetColor also for "warmWhite" and "coldWhite" and have something similar to this? x_zwave_values.Color_Switch_targetColor={"warmWhite":0,"coldWhite":0,"red":235,"green":33,"blue":33} Thanks in advance.
Multi-System Reactor
Problem with simultaneous notifications.
T
Topic thumbnail image
Multi-System Reactor
Problem after upgrading to 25067
R
MSR had been running fine, but I decided to follow the message to upgrade to 25067. Since the upgrade, I have received the message "Controller "<name>" (HubitatController hubitat2) could not be loaded at startup. Its ID is not unique." MSR throws the message on every restart. Has anyone else encountered this problem? I am running MSR on a Raspberry Pi4 connecting to two Hubitat units over an OpenVPN tunnel. One C8 and a C8 Pro. Both are up-to-date. It appears that despite the error message that MSR may be operating properly.
Multi-System Reactor
Global expressions not always evaluated
tunnusT
Topic thumbnail image
Multi-System Reactor
[Solved] Local expression evaluation
V
Topic thumbnail image
Multi-System Reactor
[Solved] Runtime error when exiting global reaction that contains a group
S
I am getting a Runtime error on different browsers when I click exit when editing an existing or creating a new global reaction containing a group. If the global reaction does not have a group I don't get an error. I see a similar post on the forum about a Runtime Error when creating reactions but started a new thread as that appears to be solved. The Runtime Error is different in the two browsers Safari v18.3 @http://192.168.10.21:8111/reactor/en-US/lib/js/reaction-list.js:171:44 You may report this error, but do not screen shot it. Copy-paste the complete text. Remember to include a description of the operation you were performing in as much detail as possible. Report using the Reactor Bug Tracker (in your left navigation) or at the SmartHome Community. Google Chrome 133.0.6943.142 TypeError: self.editor.isModified is not a function at HTMLButtonElement.<anonymous> (http://192.168.10.21:8111/reactor/en-US/lib/js/reaction-list.js:171:34) You may report this error, but do not screen shot it. Copy-paste the complete text. Remember to include a description of the operation you were performing in as much detail as possible. Report using the Reactor Bug Tracker (in your left navigation) or at the SmartHome Community. Steps to reproduce: Click the pencil to edit a global reaction with a group. Click the Exit button. Runtime error appears. or Click Create Reaction Click Add Action Select Group Add Condition such as Entity Attribute. Add an Action. Click Save Click Exit Runtime error appears. I don’t know how long the error has been there as I haven’t edited the global reaction in a long time. Reactor (Multi-hub) latest-25060-f32eaa46 Docker Mac OS: 15.3.1 Thanks
Multi-System Reactor
Cannot delete Global Expressions
SnowmanS
I am trying to delete a global expression (gLightDelay) but for some strange reason, it comes back despite clicking the Delete this expression and Save Changes buttons. I have not created a global expression for some times and just noticed this while doing some clean-up. I have upgraded Reactor to 25067 from 25060 and the behaviour is still there. I have restarted Reactor (as well as restarting its container) and cleared the browser's cache several times without success. Here's what the log shows. [latest-25067]2025-03-08T23:50:22.690Z <wsapi:INFO> [WSAPI]wsapi#1 rpc_echo [Object]{ "comment": "UI activity" } [latest-25067]2025-03-08T23:50:26.254Z <GlobalExpression:NOTICE> Deleting global expression gLightDelay [latest-25067]2025-03-08T23:50:27.887Z <wsapi:INFO> [WSAPI]wsapi#1 rpc_echo [Object]{ "comment": "UI activity" } Reactor latest-25067-62e21a2d Docker on Synology NAS
Multi-System Reactor
Local notification methods?
CatmanV2C
Morning, experts. Hard on learning about the internet check script in MSR tools, I was wondering what suggestions anyone has about a local (i.e. non-internet dependent) notification method. This was prompted by yesterday's fun and games with my ISP. I've got the script Cronned and working properly but short of flashing a light on and off, I'm struggling to think of a way of alerting me (ideally to my phone) I guess I could set up a Discord server at home, but that feels like overkill for a rare occasion. Any other suggestions? TIA C
Multi-System Reactor

Replacing SiteSensor Plugin (Vera) with MSR

Scheduled Pinned Locked Moved Multi-System Reactor
91 Posts 7 Posters 12.2k Views 6 Watching
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • cw-kidC Offline
    cw-kidC Offline
    cw-kid
    wrote on last edited by
    #25

    OK done

    https://reactor.toggledbits.com/mantisbt/view.php?id=147

    Thanks

    1 Reply Last reply
    2
    • cw-kidC Offline
      cw-kidC Offline
      cw-kid
      wrote on last edited by cw-kid
      #26

      OK so lets say I now have a variable in MSR that contains some data pulled down from a HTTP Request to some online API somewhere.

      How can I send that value / information to a Generic IO Sensor in Vera ?

      I know how to create a GenericIO device in Vera and I know how to send data to it from a simple HTTP command, for example this command will send the text "Hello World"

      http://Vera-IP/port_3480/data_request?id=lu_variableset&DeviceNum=128&serviceId=urn:micasaverde-com:serviceId:GenericSensor1&Variable=CurrentLevel&Value=Hello World
      

      And here is the device in Vera:

      51473251-7dd4-436a-b70a-02add45a940f-image.png

      But how to create a rule to send the contents of an MSR variable (expression) ?

      LibraSunL 1 Reply Last reply
      0
      • LibraSunL Offline
        LibraSunL Offline
        LibraSun
        wrote on last edited by LibraSun
        #27

        I'm going to assume the data was returned in JSON format? In which case MSR treats that like an object {}, whose keys can be referenced with dot notation.
        For example, if your variable respData stored the response {animal:"cat", clothing:"suit", food:"chow"} and you want to send the current value of the "chow" key therein, simply reference that value with respData.chow.

        One hurdle you may have to overcome, since the data is being fetched and stored in Rule A, but you want to reference the results in Rule B, is that you'd then have to either (a) store respData as a Global Expression, or (b) create a blank Expression in Rule B, and tell Rule A to [Set Variable] on it.

        1 Reply Last reply
        0
        • cw-kidC cw-kid

          OK so lets say I now have a variable in MSR that contains some data pulled down from a HTTP Request to some online API somewhere.

          How can I send that value / information to a Generic IO Sensor in Vera ?

          I know how to create a GenericIO device in Vera and I know how to send data to it from a simple HTTP command, for example this command will send the text "Hello World"

          http://Vera-IP/port_3480/data_request?id=lu_variableset&DeviceNum=128&serviceId=urn:micasaverde-com:serviceId:GenericSensor1&Variable=CurrentLevel&Value=Hello World
          

          And here is the device in Vera:

          51473251-7dd4-436a-b70a-02add45a940f-image.png

          But how to create a rule to send the contents of an MSR variable (expression) ?

          LibraSunL Offline
          LibraSunL Offline
          LibraSun
          wrote on last edited by
          #28

          @cw-kid said in Replacing SiteSensor Plugin (Vera) with MSR:

          But how to create a rule to send the contents of an MSR variable (expression) ?

          In case you revised your question, or I misinterpreted it earlier, here goes:

          It sounds like you want to send data from MSR to a plug-in / virtual device / sensor over on Vera. Before you begin, go to that "device" > Advanced > Variables and determine which of its variables is intended to receive the data.

          Click "EDIT" next to that variable, and look for its complete "service" name in the window; copy that string for use back in MSR.

          Close that window on Vera, then head back over to MSR.

          In MSR, you will want an [ENTITY ACTION] in the Set Reaction. Choose the target device as the 'Entity' and choose "x_vera_device.set_variable" as the action.

          Fill out the three fields, where "service:" and "variable:" come from the string you copied earlier. For "value:" either type a constant (numeric or "text"), or a variable name properly clad in curly brackets ( e.g. ${{respData}} ) so the value gets substituted next time the Rule triggers.

          Hope this helps!!

          1 Reply Last reply
          1
          • cw-kidC Offline
            cw-kidC Offline
            cw-kid
            wrote on last edited by
            #29

            @LibraSun

            That's great thanks I think you just answered my question, think I know what to do now, I will give it a try.

            1 Reply Last reply
            0
            • cw-kidC Offline
              cw-kidC Offline
              cw-kid
              wrote on last edited by
              #30

              @LibraSun

              Its working. I now have my current WAN IP address being sent from MSR to a virtual device (Generic IO Sensor) on Vera.

              So now know how to send any data stored in an expression / variable from MSR to a device on Vera !

              1 Reply Last reply
              2
              • cw-kidC Offline
                cw-kidC Offline
                cw-kid
                wrote on last edited by
                #31

                Just updated to today's build, the headers are now saved in that field and no longer vanish.

                However I've tried this and no data is being returned / stored

                f949e889-5d2e-4033-8ae4-505292b35797-image.png

                toggledbitsT 1 Reply Last reply
                0
                • LibraSunL Offline
                  LibraSunL Offline
                  LibraSun
                  wrote on last edited by LibraSun
                  #32

                  Try lowercase "uk" the way they show in the API docs, perhaps?

                  covid19-api.com
                  accept: application/json

                  Response should be in the form:

                  [
                    {
                      "country": "UK",
                      "code": "GB",
                      "confirmed": 4319128,
                      "recovered": 3748042,
                      "critical": 683,
                      "deaths": 126445,
                      "latitude": 55.378051,
                      "longitude": -3.435973,
                      "lastChange": "2021-03-25T18:23:06+01:00",
                      "lastUpdate": "2021-03-26T14:15:03+01:00"
                    }
                  ]
                  
                  cw-kidC 1 Reply Last reply
                  0
                  • LibraSunL LibraSun

                    Try lowercase "uk" the way they show in the API docs, perhaps?

                    covid19-api.com
                    accept: application/json

                    Response should be in the form:

                    [
                      {
                        "country": "UK",
                        "code": "GB",
                        "confirmed": 4319128,
                        "recovered": 3748042,
                        "critical": 683,
                        "deaths": 126445,
                        "latitude": 55.378051,
                        "longitude": -3.435973,
                        "lastChange": "2021-03-25T18:23:06+01:00",
                        "lastUpdate": "2021-03-26T14:15:03+01:00"
                      }
                    ]
                    
                    cw-kidC Offline
                    cw-kidC Offline
                    cw-kid
                    wrote on last edited by
                    #33

                    @librasun

                    Doesn't make any difference with lowercase "uk"

                    My expression in the rule says "null" and no data is being brought down.

                    da457671-899c-4163-97c8-480a49f1dc87-image.png

                    LibraSunL 1 Reply Last reply
                    0
                    • cw-kidC Offline
                      cw-kidC Offline
                      cw-kid
                      wrote on last edited by cw-kid
                      #34

                      Not a coder, but have been messing about with Vera's Generic IO Sensor device and managed to create a new instance that can accept multiple variables.

                      9f7d893e-c4e5-4bda-a6e2-2fb31ef61b0e-image.png

                      So if these HTTP request headers start working, I should be able to push some Covid stats to this "Generic Sensor" in Vera as a test.

                      Does something like this kind of device for displaying data already exist somewhere?

                      LibraSunL 1 Reply Last reply
                      0
                      • cw-kidC cw-kid

                        Not a coder, but have been messing about with Vera's Generic IO Sensor device and managed to create a new instance that can accept multiple variables.

                        9f7d893e-c4e5-4bda-a6e2-2fb31ef61b0e-image.png

                        So if these HTTP request headers start working, I should be able to push some Covid stats to this "Generic Sensor" in Vera as a test.

                        Does something like this kind of device for displaying data already exist somewhere?

                        LibraSunL Offline
                        LibraSunL Offline
                        LibraSun
                        wrote on last edited by
                        #35

                        @cw-kid said in Replacing SiteSensor Plugin (Vera) with MSR:

                        Does something like this kind of device for displaying data already exist somewhere?

                        Yes, the SiteSensor plug-in ( also by @toggledbits ) for Vera.

                        cw-kidC 1 Reply Last reply
                        0
                        • cw-kidC cw-kid

                          @librasun

                          Doesn't make any difference with lowercase "uk"

                          My expression in the rule says "null" and no data is being brought down.

                          da457671-899c-4163-97c8-480a49f1dc87-image.png

                          LibraSunL Offline
                          LibraSunL Offline
                          LibraSun
                          wrote on last edited by
                          #36

                          @cw-kid said in Replacing SiteSensor Plugin (Vera) with MSR:

                          My expression in the rule says "null" and no data is being brought down.

                          If it's any consolation, their site seems to be throwing a 500 error when I try to visit https://covid19-api.com/country?name=uk&format=json in my browser. How about yours?

                          cw-kidC 1 Reply Last reply
                          0
                          • LibraSunL LibraSun

                            @cw-kid said in Replacing SiteSensor Plugin (Vera) with MSR:

                            My expression in the rule says "null" and no data is being brought down.

                            If it's any consolation, their site seems to be throwing a 500 error when I try to visit https://covid19-api.com/country?name=uk&format=json in my browser. How about yours?

                            cw-kidC Offline
                            cw-kidC Offline
                            cw-kid
                            wrote on last edited by cw-kid
                            #37

                            @librasun said in Replacing SiteSensor Plugin (Vera) with MSR:

                            If it's any consolation, their site seems to be throwing a 500 error when I try to visit https://covid19-api.com/country?name=uk&format=json in my browser. How about yours?

                            Same for me also.

                            However try their CURL command in a terminal window, that works and brings back data OK

                            7d94bd41-1acb-4eb5-9e79-7a2f3b011254-image.png

                            1 Reply Last reply
                            1
                            • LibraSunL LibraSun

                              @cw-kid said in Replacing SiteSensor Plugin (Vera) with MSR:

                              Does something like this kind of device for displaying data already exist somewhere?

                              Yes, the SiteSensor plug-in ( also by @toggledbits ) for Vera.

                              cw-kidC Offline
                              cw-kidC Offline
                              cw-kid
                              wrote on last edited by cw-kid
                              #38

                              @librasun said in Replacing SiteSensor Plugin (Vera) with MSR:

                              Yes, the SiteSensor plug-in ( also by @toggledbits ) for Vera.

                              But aren't we trying to "replace" that plugin 😁

                              Some decent Generic IO Sensor virtual device we could create and send data too directly from MSR would be nice.

                              EDIT: I've just noticed my tweaked GenericIO device does not appear correctly in the Vera mobile app but only on the UI7 web GUI.

                              LibraSunL 1 Reply Last reply
                              0
                              • cw-kidC cw-kid

                                @librasun said in Replacing SiteSensor Plugin (Vera) with MSR:

                                Yes, the SiteSensor plug-in ( also by @toggledbits ) for Vera.

                                But aren't we trying to "replace" that plugin 😁

                                Some decent Generic IO Sensor virtual device we could create and send data too directly from MSR would be nice.

                                EDIT: I've just noticed my tweaked GenericIO device does not appear correctly in the Vera mobile app but only on the UI7 web GUI.

                                LibraSunL Offline
                                LibraSunL Offline
                                LibraSun
                                wrote on last edited by
                                #39

                                @cw-kid said in Replacing SiteSensor Plugin (Vera) with MSR:

                                I've just noticed my tweaked GenericIO device does not appear correctly in the Vera mobile app but only on the UI7 web GUI.

                                Yes, for this reason we can never truly abandon SiteSensor. Why reinvent the wheel, anyway?
                                But it does beg the question: Why do you need a generic sensor on your Vera when it could "live" on MSR? After all, is it not just a placeholder for data?

                                cw-kidC 1 Reply Last reply
                                0
                                • LibraSunL LibraSun

                                  @cw-kid said in Replacing SiteSensor Plugin (Vera) with MSR:

                                  I've just noticed my tweaked GenericIO device does not appear correctly in the Vera mobile app but only on the UI7 web GUI.

                                  Yes, for this reason we can never truly abandon SiteSensor. Why reinvent the wheel, anyway?
                                  But it does beg the question: Why do you need a generic sensor on your Vera when it could "live" on MSR? After all, is it not just a placeholder for data?

                                  cw-kidC Offline
                                  cw-kidC Offline
                                  cw-kid
                                  wrote on last edited by
                                  #40

                                  @librasun said in Replacing SiteSensor Plugin (Vera) with MSR:

                                  Why do you need a generic sensor on your Vera when it could "live" on MSR?

                                  So I can add that device in to the Home Remote dashboard app also.

                                  If it's only on MSR I don't know how to connect Home Remote to MSR directly.

                                  1 Reply Last reply
                                  0
                                  • LibraSunL Offline
                                    LibraSunL Offline
                                    LibraSun
                                    wrote on last edited by
                                    #41

                                    Fair enough (although I'm certain that capacity will come once MSR variables get exposed via the API).

                                    1 Reply Last reply
                                    0
                                    • cw-kidC cw-kid

                                      Just updated to today's build, the headers are now saved in that field and no longer vanish.

                                      However I've tried this and no data is being returned / stored

                                      f949e889-5d2e-4033-8ae4-505292b35797-image.png

                                      toggledbitsT Offline
                                      toggledbitsT Offline
                                      toggledbits
                                      wrote on last edited by toggledbits
                                      #42

                                      @cw-kid said in Replacing SiteSensor Plugin (Vera) with MSR:

                                      no data is being returned / stored

                                      Sheesh. I'll admit I'm a little on edge this morning because we had a major storm roll through last night with some nasty lightning (and a tornado very close to us) and it apparently killed my daily-use laptop (cheap, old, no big loss, just a distraction to recover but they were almost two-for-a-dollar on sleezeBay), so forgive me, but...

                                      There have been no fewer than 10 posts since the above quoted post, and despite my admonition in bold text yesterday in this very thread, not one mention of what may lie in reactor.log.

                                      Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                                      1 Reply Last reply
                                      1
                                      • cw-kidC Offline
                                        cw-kidC Offline
                                        cw-kid
                                        wrote on last edited by cw-kid
                                        #43

                                        Its working now with the new update and pulling down data OK, thanks.

                                        However I am not able to split out the data in to different global expressions. I think I have it setup correctly but all the global expressions say "null".

                                        RULE:

                                        8ab6810d-d5ad-44d9-813b-5b53f91b892f-image.png

                                        GLOBAL EXPRESSIONS:

                                        1e1e8d36-914f-45ae-9e99-08132cc9a012-image.png

                                        1 Reply Last reply
                                        0
                                        • toggledbitsT Offline
                                          toggledbitsT Offline
                                          toggledbits
                                          wrote on last edited by
                                          #44

                                          Notice the [ that starts the displayed value... it's an array. The { that follows tells you there's an object as the first element of the array. So you need to pluck the first element out of the array, then dereference through it to the key you want, like covidstats[0].critical.

                                          Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                                          cw-kidC 2 Replies Last reply
                                          0
                                          Reply
                                          • Reply as topic
                                          Log in to reply
                                          • Oldest to Newest
                                          • Newest to Oldest
                                          • Most Votes


                                          Recent Topics

                                          • Advice reqeusted to migrate MSR from Bare Metal to Container
                                            T
                                            tamorgen
                                            0
                                            5
                                            38

                                          • Reactor (Multi-System/Multi-Hub) Announcements
                                            toggledbitsT
                                            toggledbits
                                            5
                                            122
                                            35.4k

                                          • Z-Wave Future....
                                            CatmanV2C
                                            CatmanV2
                                            0
                                            5
                                            131

                                          • Can´t restart or upgrade/deploy MSR
                                            toggledbitsT
                                            toggledbits
                                            0
                                            4
                                            86

                                          • [Solved] Limit HA Entity in MSR
                                            wmarcolinW
                                            wmarcolin
                                            0
                                            7
                                            191

                                          • Disaster recovery and virtualisation
                                            CatmanV2C
                                            CatmanV2
                                            0
                                            5
                                            662

                                          • Remote access of Zwave stick from Z-wave server
                                            CatmanV2C
                                            CatmanV2
                                            0
                                            3
                                            384

                                          • Organizing/ structuring rule sets and rules
                                            G
                                            gwp1
                                            0
                                            5
                                            374

                                          • Moving MSR from a QNAP container to RP 5 - some issues
                                            G
                                            gwp1
                                            0
                                            5
                                            346

                                          • Widget deletion does not work and landing page (status) is empy
                                            G
                                            gwp1
                                            0
                                            4
                                            338

                                          • Need help reducing false positive notifications
                                            T
                                            tamorgen
                                            0
                                            7
                                            520
                                          Powered by NodeBB | Contributors
                                          Hosted freely by 10RUPTiV - Solutions Technologiques | Contact us
                                          • Login

                                          • Don't have an account? Register

                                          • Login or register to search.
                                          • First post
                                            Last post
                                          0
                                          • Categories
                                          • Recent
                                          • Tags
                                          • Popular
                                          • Unsolved