Skip to content
  • Categories
  • Recent
  • Tags
  • Popular
  • Unsolved
Collapse
Discussion Forum to share and further the development of home control and automation, independent of platforms.
  1. Home
  2. Software
  3. Multi-System Reactor
  4. Updated to latest MSR 21243 and no entities are being executed I Hubitat
Set reaction triggering wrong z-wave device
T
Topic thumbnail image
Multi-System Reactor
Can you run MSR on Home Assistant OS ?
cw-kidC
Looking at using Home Assistant for the first time, either on a Home Assistant Green, their own hardware or buying a cheap second hand mini PC. Sounds like Home Assistant OS is linux based using Docker for HA etc. Would I also be able to install things like MSR as well on their OS ? On the same box? Thanks.
Multi-System Reactor
How to upgrade from an old version of MSR?
cw-kidC
Hello I haven't updated my installation of MSR in a very long time. Its a bare metal Linux install currently on version 24366-3de60836 I see the latest version is now latest-26011-c621bbc7 I assume I cannot just jump from a very old version to the latest version? Or can I? Thanks
Multi-System Reactor
This trigger no longer working - complaining about the operator needing changing
cw-kidC
Topic thumbnail image
Multi-System Reactor
Self test
CatmanV2C
Having been messing around with some stuff I worked a way to self trigger some tests that I wanted to do on the HA <> MSR integration This got me wondering if there's an entity that changes state / is exposed when a configured controller goes off line? I can't see one but thought it might be hidden or something? Cheers C
Multi-System Reactor
Access control - allowing anonymous user to dashboard
tunnusT
Using build 25328 and having the following users.yaml configuration: users: # This section defines your valid users. admin: ******* groups: # This section defines your user groups. Optionally, it defines application # and API access restrictions (ACLs) for the group. Users may belong to # more than one group. Again, no required or special groups here. admin_group: users: - admin applications: true # special form allows access to ALL applications guests: users: "*" applications: - dashboard api_acls: # This ACL allows users in the "admin" group to access the API - url: "/api" group: admin_group allow: true log: true # This ACL allows anyone/thing to access the /api/v1/alive API endpoint - url: "/api/v1/alive" allow: true session: timeout: 7200 # (seconds) rolling: true # activity extends timeout when true # If log_acls is true, the selected ACL for every API access is logged. log_acls: true # If debug_acls is true, even more information about ACL selection is logged. debug_acls: true My goal is to allow anonymous user to dashboard, but MSR is still asking for a password when trying to access that. Nothing in the logs related to dashboard access. Probably an error in the configuration, but help needed to find that. Tried to put url: "/dashboard" under api_acls, but that was a long shot and didn't work.
Multi-System Reactor
VEC Virtual Switch Auto Off
S
I use Virtual Entity Controller virtual switches which I turn on via webhooks from other applications. Once a switch triggers and turns on, I can then activate associated rules. I would like each virtual switch to automatically turn off after a configurable time (e.g., 5 seconds, 10 seconds). Is there a better way to achieve this auto-off behavior instead of creating a separate rule for each switch that uses the 'Condition must be sustained for' option to turn it off? With a large number of these switches (and the associated turn-off rules), I'm checking to see if there is a simpler approach.If not, could this be a feature request to add an auto-off timer directly to the virtual switches. Thanks Reactor (Multi-hub) latest-26011-c621bbc7 VirtualEntityController v25356 Synology Docker
Multi-System Reactor
Upcoming Storage Change -- Got Back-ups?
toggledbitsT
TL;DR: Format of data in storage directory will soon change. Make sure you are backing up the contents of that directory in its entirety, and you preserve your backups for an extended period, particularly the backup you take right before upgrading to the build containing this change (date of that is still to be determined, but soon). The old data format will remain readable (so you'll be able to read your pre-change backups) for the foreseeable future. In support of a number of other changes in the works, I have found it necessary to change the storage format for Reactor objects in storage at the physical level. Until now, plain, standard JSON has been used to store the data (everything under the storage directory). This has served well, but has a few limitations, including no real support for native JavaScript objects like Date, Map, Set, and others. It also is unable to store data that contains "loops" — objects that reference themselves in some way. I'm not sure exactly when, but in the not-too-distant future I will publish a build using the new data format. It will automatically convert existing JSON data to the new format. For the moment, it will save data in both the new format and the old JSON format, preferring the former when loading data from storage. I have been running my own home with this new format for several months, and have no issues with data loss or corruption. A few other things to know: If you are not already backing up your storage directory, you should be. At a minimum, back this directory up every time you make big changes to your Rules, Reactions, etc. Your existing JSON-format backups will continue to be readable for the long-term (years). The code that loads data from these files looks for the new file format first (which will have a .dval suffix), and if not found, will happily read (and convert) a same-basenamed .json file (i.e. it looks for ruleid.dval first, and if it doesn't find it, it tries to load ruleid.json). I'll publish detailed instructions for restoring from old backups when the build is posted (it's easy). The new .dval files are not directly human-readable or editable as easily as the old .json files. A new utility will be provided in the tools directory to convert .dval data to .json format, which you can then read or edit if you find that necessary. However, that may not work for all future data, as my intent is to make more native JavaScript objects directly storable, and many of those objects cannot be stored in JSON. You may need to modify your backup tools/scripts to pick up the new files: if you explicitly name .json files (rather than just specifying the entire storage directory) in your backup configuration, you will need to add .dval files to get a complete, accurate backup. I don't think this will be an issue for any of you; I imagine that you're all just backing up the entire contents of storage regardless of format/name, that is the safest (and IMO most correct) way to go (if that's not what you're doing, consider changing your approach). The current code stores the data in both the .dval form and the .json form to hedge against any real-world problems I don't encounter in my own use. Some future build will drop this redundancy (i.e. save only to .dval form). However, the read code for the .json form will remain in any case. This applies only to persistent storage that Reactor creates and controls under the storage tree. All other JSON data files (e.g. device data for Controllers) are unaffected by this change and will remain in that form. YAML files are also unaffected by this change. This thread is open for any questions or concerns.
Multi-System Reactor
Oddness in Copy/Move of Reactions
G
Topic thumbnail image
Multi-System Reactor
[Solved] function isRuleEnabled() issue
CrilleC
Topic thumbnail image
Multi-System Reactor
[Reactor] Problem with Global Reactions and groups
therealdbT
Topic thumbnail image
Multi-System Reactor
Possible feature request 2?
CatmanV2C
Just another thought. Adding devices from my Home Assistant / Zigbee2MQTT integration. Works perfectly but they always add as their IEEE address. Some of these devices have up to 10 entities associated, and the moment they are renamed to something sensible, each of those entities 'ceases to exist' in MSR. I like things tidy, and deleting each defunct entity needs 3 clicks. Any chance of a 'bulk delete' option? No biggy as I've pretty much finished my Z-wave migration and I don't expect to be adding more than 2 new Zigbee devices Cheers C
Multi-System Reactor
Reactor (Multi-System/Multi-Hub) Announcements
toggledbitsT
Build 21228 has been released. Docker images available from DockerHub as usual, and bare-metal packages here. Home Assistant up to version 2021.8.6 supported; the online version of the manual will now state the current supported versions; Fix an error in OWMWeatherController that could cause it to stop updating; Unify the approach to entity filtering on all hub interface classes (controllers); this works for device entities only; it may be extended to other entities later; Improve error detail in messages for EzloController during auth phase; Add isRuleSet() and isRuleEnabled() functions to expressions extensions; Implement set action for lock and passage capabilities (makes them more easily scriptable in some cases); Fix a place in the UI where 24-hour time was not being displayed.
Multi-System Reactor
Copying a global reaction
tunnusT
With build 25328, if you copy a global reaction, a new reaction does not appear in the UI unless you do a refresh. I recall this used to work without needing this page refresh? Anyway, only a minor nuisance.
Multi-System Reactor
[Reactor] Bug when sending MQTT boolean payloads
therealdbT
Topic thumbnail image
Multi-System Reactor
Difficulty defining repeating annual period
R
I have tried numerous ways to define a recurring annual period, for example from December 15 to January 15. No matter which method I try - after and before, between, after and/not after, Reactor reports "waiting for invalid date, invalid date. Some constructs also seem to cause Reactor to hang, timeout and restart. For example "before January 15 is evaluated as true, but reports "waiting for invalid date, invalid date". Does anyone have a tried and true method to define a recurring annual period? I think the "between" that I used successfully in the past may have broken with one of the updates.
Multi-System Reactor
Need help with sequence
T
Good evening all, For about the past week or so, I've been having problems with a specific rule in my home automation that controls when my home goes from an Away mode to Home mode. One of the conditions it checked for was my alarm panel, when it changed from Armed Away to Disarmed. There seems to have been a firmware update on the panel that added an intermittent step of "pending", and I can't say for certain it happens 100% of the time. Is there a way to write a condition that so it changes from one condition, to the next, and then another condition? As in, Home alarm changes from armed_away to pending to disarmed. Thanks.
Multi-System Reactor
Possible feature request?
CatmanV2C
No idea how easy this would be. During my migration away from Z-wave I've been replacing the Z-wave devices with Sonoff which has broken some of my automations. Any chance of a 'Test Reaction' function to call out which ones are broken because an entity no longer exists? Without actually running the reaction? Or does this exist already and I'm just not aware of how to do it? Obviously I can see entities that are no longer available, but not quite what I'm looking for. I guess it's something of an edge case so no huge issue. TIA! C
Multi-System Reactor
Logic Assistance: Exterior Lights on when Illuminance Below Threshold
PablaP
Topic thumbnail image
Multi-System Reactor
Time series documentation
tunnusT
Is the current manual (incl. examples) up to date with how retention value is handled in time series configuration? Referring to this post
Multi-System Reactor

Updated to latest MSR 21243 and no entities are being executed I Hubitat

Scheduled Pinned Locked Moved Multi-System Reactor
47 Posts 6 Posters 9.9k Views 6 Watching
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • toggledbitsT Offline
    toggledbitsT Offline
    toggledbits
    wrote on last edited by
    #24

    OK. Post that startup, then. It will tell me a few things as well.

    Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

    1 Reply Last reply
    0
    • toggledbitsT Offline
      toggledbitsT Offline
      toggledbits
      wrote on last edited by toggledbits
      #25

      Wait, I'm really confused, you said "nothing is being logged there after stop ,start". Then where did the stuff you posted here come from?

      Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

      M 2 Replies Last reply
      0
      • toggledbitsT toggledbits

        Wait, I'm really confused, you said "nothing is being logged there after stop ,start". Then where did the stuff you posted here come from?

        M Offline
        M Offline
        Matteburk
        wrote on last edited by
        #26

        @toggledbits they that you refer to are there but nothing after I now stopped and started

        1 Reply Last reply
        0
        • toggledbitsT toggledbits

          Wait, I'm really confused, you said "nothing is being logged there after stop ,start". Then where did the stuff you posted here come from?

          M Offline
          M Offline
          Matteburk
          wrote on last edited by
          #27

          @toggledbits But if I no try to start via node app.js
          I get in terminal window

          pi@raspberrypi:~ $ node app.js
          internal/modules/cjs/loader.js:883
          throw err;
          ^

          Error: Cannot find module '/home/pi/app.js'
          at Function.Module._resolveFilename (internal/modules/cjs/loader.js:880:15)
          at Function.Module._load (internal/modules/cjs/loader.js:725:27)
          at Function.executeUserEntryPoint [as runMain] (internal/modules/run_main.js:72:12)
          at internal/main/run_main_module.js:17:47 {
          code: 'MODULE_NOT_FOUND',
          requireStack: []
          }
          pi@raspberrypi:~ $

          1 Reply Last reply
          0
          • toggledbitsT Offline
            toggledbitsT Offline
            toggledbits
            wrote on last edited by
            #28

            Well that's because you're not in the Reactor directory.

            Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

            M 1 Reply Last reply
            0
            • toggledbitsT toggledbits

              Well that's because you're not in the Reactor directory.

              M Offline
              M Offline
              Matteburk
              wrote on last edited by
              #29

              @toggledbits
              Gaaah..... im tired and beginner.....Sorry....

              ok so this I no get when I run node app.js

              2021-09-06T19:59:36.893Z Rule:5:980:Rule.js Rule#rule-kmst5xze._evaluate() mutex acquired, evaluating
              2021-09-06T19:59:36.894Z Rule:5:984:Rule.js Rule#rule-kmst5xze update rate is 1/min limit 60/min
              2021-09-06T19:59:36.895Z Rule:5:904:Rule.js Rule#rule-kmst5xze evaluateExpressions() with 0 expressions
              2021-09-06T19:59:36.897Z Rule:CRIT Error: Cannot find module 'common/util'
              Require stack:

              • /home/pi/reactor/server/lib/Engine.js
              • /home/pi/reactor/server/lib/httpapi.js
              • /home/pi/reactor/app.js
                Error: Cannot find module 'common/util'
                Require stack:
              • /home/pi/reactor/server/lib/Engine.js
              • /home/pi/reactor/server/lib/httpapi.js
              • /home/pi/reactor/app.js
                at Function.Module._resolveFilename (internal/modules/cjs/loader.js:880:15)
                at Function.Module._load (internal/modules/cjs/loader.js:725:27)
                at Module.require (internal/modules/cjs/loader.js:952:19)
                at require (internal/modules/cjs/helpers.js:88:18)
                at Engine._get_lexp_extensions (/home/pi/reactor/server/lib/Engine.js:862:25)
                at Rule.evaluateExpressions (/home/pi/reactor/server/lib/Rule.js:904:330)
                at Rule._evaluate (/home/pi/reactor/server/lib/Rule.js:994:344)
                at processTicksAndRejections (internal/process/task_queues.js:93:5)
                at async /home/pi/reactor/server/lib/Rule.js:963:17
              1 Reply Last reply
              0
              • toggledbitsT Offline
                toggledbitsT Offline
                toggledbits
                wrote on last edited by toggledbits
                #30

                Right. And we've covered that. If you run it from the command line, you need to use

                    NODE_PATH=$(pwd) node app
                

                Do that, and please post (a) the startup messages from logs/reactor.log as specified in my previous post, and (b) the contents of /etc/systemd/system/reactor.service again.

                Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                M 1 Reply Last reply
                1
                • toggledbitsT toggledbits

                  Right. And we've covered that. If you run it from the command line, you need to use

                      NODE_PATH=$(pwd) node app
                  

                  Do that, and please post (a) the startup messages from logs/reactor.log as specified in my previous post, and (b) the contents of /etc/systemd/system/reactor.service again.

                  M Offline
                  M Offline
                  Matteburk
                  wrote on last edited by
                  #31

                  @toggledbits

                  We have a winner!

                  I did
                  cd reactor
                  NODE_PATH=$(pwd) node app ( this line I totally missed)

                  and my house lit up like a Christmas trea!😂

                  Thank you for your patience with me Patrick!

                  1 Reply Last reply
                  0
                  • toggledbitsT Offline
                    toggledbitsT Offline
                    toggledbits
                    wrote on last edited by
                    #32

                    No, we're not done. That's not the way to run Reactor. You need to be running it under systemd. Please provide the information above as requested.

                    Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                    M 1 Reply Last reply
                    0
                    • toggledbitsT toggledbits

                      No, we're not done. That's not the way to run Reactor. You need to be running it under systemd. Please provide the information above as requested.

                      M Offline
                      M Offline
                      Matteburk
                      wrote on last edited by toggledbits
                      #33

                      @toggledbits
                      hehe.... went exited

                      /etc/systemd/system/reactor.service......

                      [Unit]
                      Description=Multi System Reactor
                      After=network.target
                      
                      [Service]
                      Type=simple
                      User=pi
                      WorkingDirectory=/home/pi/reactor
                      Environment=NODE_PATH=/home/pi/reactor
                      ExecStart=/home/pi/.local/lib/nodejs/node-v14.15.4-linux-armv7l/bin/node
                      
                      
                      
                      Restart=on-failure
                      RestartSec=5s
                      
                      [Install]
                      WantedBy=multi-user.target
                      

                      Reactor log......

                      2021-09-06T20:07:08.063Z <app:null> Reactor "1.0.1-21243-ab6d917" starting on v14.15.4
                      2021-09-06T20:07:08.066Z <app:INFO> Process ID 3029; platform linux/arm #1408 SMP Mon Mar 22 12:49:24 GMT 2021; locale [ "sv-SE", "UTF-8" ]
                      2021-09-06T20:07:08.067Z <app:INFO> Basedir /home/pi/reactor; data in /home/pi/reactor/storage
                      2021-09-06T20:07:08.067Z <app:INFO> NODE_PATH /home/pi/reactor; module paths [ "/home/pi/reactor/node_modules", "/home/pi/node_modules", "/home/node_modules", "/node_modules" ]
                      2021-09-06T20:07:08.241Z <Plugin:null> Module Plugin v21173
                      2021-09-06T20:07:08.273Z <default:INFO> Module Entity v21177
                      2021-09-06T20:07:08.284Z <Controller:null> Module Controller v21226
                      2021-09-06T20:07:08.286Z <default:null> Module Structure v21229
                      2021-09-06T20:07:08.305Z <default:null> Module Ruleset v21096
                      2021-09-06T20:07:08.306Z <default:null> Module Rulesets v21096
                      2021-09-06T20:07:08.380Z <default:null> Module Rule v21224
                      2021-09-06T20:07:08.397Z <default:null> Module Engine v21213
                      2021-09-06T20:07:08.399Z <default:null> Module httpapi v21238
                      2021-09-06T20:07:08.406Z <default:null> Module httpproxy v21054
                      2021-09-06T20:07:08.450Z <default:null> Module wsapi v21196
                      2021-09-06T20:07:08.454Z <app:NOTICE> Starting Structure...
                      2021-09-06T20:07:08.463Z <Structure:INFO> Structure#1 starting controller interface vera (VeraController)
                      2021-09-06T20:07:08.473Z <Structure:INFO> Structure#1 starting controller interface hubitat (HubitatController)
                      2021-09-06T20:07:08.480Z <Structure:INFO> Structure#1 starting controller interface reactor_system (SystemController)
                      2021-09-06T20:07:08.622Z <default:null> Module VeraController v21236
                      2021-09-06T20:07:08.629Z <default:null> Module HubitatController v21243
                      2021-09-06T20:07:08.632Z <default:null> Module SystemController v21102
                      2021-09-06T20:07:08.642Z <VeraController:NOTICE> VeraController#vera starting
                      2021-09-06T20:07:08.765Z <VeraController:INFO> VeraController#vera loaded mapping ver 21236 rev 1 format 1 notice 
                      2021-09-06T20:07:08.767Z <VeraController:INFO> VeraController: deviceclass vera_system_object capability sys_system does not provide attribute state
                      2021-09-06T20:07:08.887Z <Controller:NOTICE> Controller SystemController#reactor_system is now online.
                      2021-09-06T20:07:09.035Z <app:INFO> Structure running; pausing for controllers' initial ready
                      2021-09-06T20:07:09.044Z <Controller:NOTICE> HubitatController#hubitat not ready; performing initial connect/query
                      2021-09-06T20:07:09.629Z <VeraController:NOTICE> Controller VeraController#vera is now online.
                      2021-09-06T20:07:10.118Z <Controller:ERR> HubitatController#hubitat mapped capability x_hubitat_healthcheck has no implementation
                      2021-09-06T20:07:10.158Z <Controller:ERR> HubitatController#hubitat mapped capability x_hubitat_healthcheck has no implementation
                      2021-09-06T20:07:10.274Z <Controller:ERR> HubitatController#hubitat mapped capability x_hubitat_healthcheck has no implementation
                      2021-09-06T20:07:10.281Z <Controller:ERR> HubitatController#hubitat mapped capability x_hubitat_healthcheck has no implementation
                      2021-09-06T20:07:10.287Z <Controller:ERR> HubitatController#hubitat mapped capability x_hubitat_healthcheck has no implementation
                      2021-09-06T20:07:10.289Z <Controller:ERR> HubitatController#hubitat mapped capability x_hubitat_healthcheck has no implementation
                      2021-09-06T20:07:10.318Z <Controller:ERR> HubitatController#hubitat mapped capability x_hubitat_healthcheck has no implementation
                      2021-09-06T20:07:10.326Z <Controller:ERR> HubitatController#hubitat mapped capability x_hubitat_healthcheck has no implementation
                      2021-09-06T20:07:10.331Z <Controller:ERR> HubitatController#hubitat mapped capability x_hubitat_healthcheck has no implementation
                      2021-09-06T20:07:10.478Z <Controller:INFO> HubitatController#hubitat connecting to hub's eventsocket WebSocket API at ws://192.168.68.145/eventsocket
                      2021-09-06T20:07:10.484Z <Controller:NOTICE> Controller HubitatController#hubitat is now online.
                      2021-09-06T20:07:10.489Z <app:NOTICE> Starting Reaction Engine...
                      2021-09-06T20:07:10.491Z <Engine:INFO> Reaction Engine starting
                      2021-09-06T20:07:10.492Z <Engine:INFO> Checking rule sets...
                      2021-09-06T20:07:10.504Z <Engine:INFO> Checking rules...
                      2021-09-06T20:07:10.506Z <Engine:INFO> Data check complete; no corrections.
                      
                      1 Reply Last reply
                      0
                      • toggledbitsT Offline
                        toggledbitsT Offline
                        toggledbits
                        wrote on last edited by
                        #34

                        OK. Looks good.

                        First, make sure your command line Reactor is stopped. This is important, obviously, as the systemd Reactor will not start and keep trying to start if your command line Reactor is still running. Also, let's remove the existing Reactor log file:

                            rm /home/pi/reactor/logs/reactor.log
                        

                        Then, sudo systemctl daemon-reload

                        Then, sudo systemctl restart reactor

                        Then try to get into the Reactor UI. If you can't get into the UI, look at the reactor.log file for messages. In you still have the "common/util" exception, go up to the startup lines and look at what it reports for NODE_PATH and post that here.

                        Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                        M 1 Reply Last reply
                        0
                        • toggledbitsT toggledbits

                          OK. Looks good.

                          First, make sure your command line Reactor is stopped. This is important, obviously, as the systemd Reactor will not start and keep trying to start if your command line Reactor is still running. Also, let's remove the existing Reactor log file:

                              rm /home/pi/reactor/logs/reactor.log
                          

                          Then, sudo systemctl daemon-reload

                          Then, sudo systemctl restart reactor

                          Then try to get into the Reactor UI. If you can't get into the UI, look at the reactor.log file for messages. In you still have the "common/util" exception, go up to the startup lines and look at what it reports for NODE_PATH and post that here.

                          M Offline
                          M Offline
                          Matteburk
                          wrote on last edited by
                          #35

                          @toggledbits Could not reach thrue UI .

                          The reactor.log file is no missing since the rm command.....

                          1 Reply Last reply
                          0
                          • toggledbitsT Offline
                            toggledbitsT Offline
                            toggledbits
                            wrote on last edited by toggledbits
                            #36

                            OK. Then /var/log/syslog

                            And tell me, how did you edit the service file? There are some excess blank lines in what you posted when I got it formatted as code on the forums... that's... odd... did you edit it on the system, or did you pull it up to a Mac or Windows, edit it, and then push it down? Or something else?

                            Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                            1 Reply Last reply
                            0
                            • M Offline
                              M Offline
                              Matteburk
                              wrote on last edited by
                              #37

                              I edited them directly on the pie in the textfile.

                              this is what the var log file said:

                              Sep 6 22:17:23 raspberrypi dhcpcd[428]: wlan0: fe80::465:fde6:f33:2344 is reachable again
                              Sep 6 22:17:23 raspberrypi avahi-daemon[429]: Withdrawing address record for fe80::2598:15e9:620:fe7d on eth0.
                              Sep 6 22:17:26 raspberrypi dhcpcd[428]: eth0: leased 192.168.68.126 for 7200 seconds
                              Sep 6 22:17:26 raspberrypi avahi-daemon[429]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.68.126.
                              Sep 6 22:17:26 raspberrypi dhcpcd[428]: eth0: adding route to 192.168.68.0/24
                              Sep 6 22:17:26 raspberrypi dhcpcd[428]: eth0: adding default route via 192.168.68.1
                              Sep 6 22:17:26 raspberrypi avahi-daemon[429]: New relevant interface eth0.IPv4 for mDNS.
                              Sep 6 22:17:26 raspberrypi avahi-daemon[429]: Registering new address record for 192.168.68.126 on eth0.IPv4.
                              Sep 6 22:17:34 raspberrypi systemd[1]: systemd-fsckd.service: Succeeded.
                              Sep 6 22:50:34 raspberrypi systemd-timesyncd[339]: Synchronized to time server for the first time 178.16.128.13:123 (2.debian.pool.ntp.org).
                              Sep 6 22:50:41 raspberrypi systemd[1]: systemd-hostnamed.service: Succeeded.
                              Sep 6 22:53:32 raspberrypi dbus-daemon[626]: [session uid=1000 pid=626] Activating service name='ca.desrt.dconf' requested by ':1.28' (uid=1000 pid=1084 comm="mousepad /var/log/syslog ")
                              Sep 6 22:53:32 raspberrypi dbus-daemon[626]: [session uid=1000 pid=626] Successfully activated service 'ca.desrt.dconf'
                              Sep 6 22:54:50 raspberrypi dbus-daemon[418]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.51' (uid=1000 pid=1100 comm="/usr/lib/chromium-browser/chromium-browser-v7 --fo")
                              Sep 6 22:54:50 raspberrypi systemd[1]: Starting Hostname Service...
                              Sep 6 22:54:50 raspberrypi dbus-daemon[418]: [system] Successfully activated service 'org.freedesktop.hostname1'
                              Sep 6 22:54:50 raspberrypi systemd[1]: Started Hostname Service.
                              Sep 6 22:54:50 raspberrypi gvfsd[665]: mkdir failed on directory /var/cache/samba: Åtkomst nekas
                              Sep 6 22:54:50 raspberrypi gvfsd[665]: mkdir failed on directory /var/cache/samba: Åtkomst nekas
                              Sep 6 22:54:51 raspberrypi gvfsd[665]: mkdir failed on directory /var/cache/samba: Åtkomst nekas
                              Sep 6 22:54:51 raspberrypi gvfsd[665]: mkdir failed on directory /var/cache/samba: Åtkomst nekas
                              Sep 6 22:54:52 raspberrypi gvfsd[665]: mkdir failed on directory /var/cache/samba: Åtkomst nekas
                              Sep 6 22:54:52 raspberrypi gvfsd[665]: mkdir failed on directory /var/cache/samba: Åtkomst nekas
                              Sep 6 22:54:53 raspberrypi gvfsd[665]: mkdir failed on directory /var/cache/samba: Åtkomst nekas
                              Sep 6 22:54:53 raspberrypi gvfsd[665]: mkdir failed on directory /var/cache/samba: Åtkomst nekas
                              Sep 6 22:54:54 raspberrypi gvfsd[665]: mkdir failed on directory /var/cache/samba: Åtkomst nekas
                              Sep 6 22:54:54 raspberrypi gvfsd[665]: mkdir failed on directory /var/cache/samba: Åtkomst nekas
                              Sep 6 22:54:55 raspberrypi gvfsd[665]: mkdir failed on directory /var/cache/samba: Åtkomst nekas
                              Sep 6 22:54:55 raspberrypi gvfsd[665]: mkdir failed on directory /var/cache/samba: Åtkomst nekas

                              1 Reply Last reply
                              0
                              • toggledbitsT Offline
                                toggledbitsT Offline
                                toggledbits
                                wrote on last edited by toggledbits
                                #38

                                I just noticed, the ExecStart line in your edited service file is incomplete. It should read:

                                    ExecStart=/home/pi/.local/lib/nodejs/node-v14.15.4-linux-armv7l/bin/node app -p
                                

                                Fix that. Then do:

                                    sudo systemctl daemon-reload
                                    sudo systemctl restart reactor
                                

                                Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                                M 1 Reply Last reply
                                0
                                • toggledbitsT toggledbits

                                  I just noticed, the ExecStart line in your edited service file is incomplete. It should read:

                                      ExecStart=/home/pi/.local/lib/nodejs/node-v14.15.4-linux-armv7l/bin/node app -p
                                  

                                  Fix that. Then do:

                                      sudo systemctl daemon-reload
                                      sudo systemctl restart reactor
                                  
                                  M Offline
                                  M Offline
                                  Matteburk
                                  wrote on last edited by
                                  #39

                                  @toggledbits said in Updated to latest MSR 21243 and no entities are being executed I Hubitat:

                                  ExecStart=/home/pi/.local/lib/nodejs/node-v14.15.4-linux-armv7l/bin/node app -p

                                  Changed it and now i can reach msr thrue UI!

                                  Here is the reactor.log

                                  2021-09-06T21:05:42.633Z app:null Reactor "1.0.1-21243-ab6d917" starting on v14.15.4
                                  2021-09-06T21:05:42.636Z app:INFO Process ID 1780; platform linux/arm #1408 SMP Mon Mar 22 12:49:24 GMT 2021; locale [ "sv-SE", "UTF-8" ]
                                  2021-09-06T21:05:42.637Z app:INFO Basedir /home/pi/reactor; data in /home/pi/reactor/storage
                                  2021-09-06T21:05:42.637Z app:INFO NODE_PATH /home/pi/reactor; module paths [ "/home/pi/reactor/node_modules", "/home/pi/node_modules", "/home/node_modules", "/node_modules" ]
                                  2021-09-06T21:05:42.781Z Plugin:null Module Plugin v21173
                                  2021-09-06T21:05:42.797Z default:INFO Module Entity v21177
                                  2021-09-06T21:05:42.805Z Controller:null Module Controller v21226
                                  2021-09-06T21:05:42.806Z default:null Module Structure v21229
                                  2021-09-06T21:05:42.822Z default:null Module Ruleset v21096
                                  2021-09-06T21:05:42.823Z default:null Module Rulesets v21096
                                  2021-09-06T21:05:42.869Z default:null Module Rule v21224
                                  2021-09-06T21:05:42.880Z default:null Module Engine v21213
                                  2021-09-06T21:05:42.881Z default:null Module httpapi v21238
                                  2021-09-06T21:05:42.886Z default:null Module httpproxy v21054
                                  2021-09-06T21:05:42.925Z default:null Module wsapi v21196
                                  2021-09-06T21:05:42.928Z app:NOTICE Starting Structure...
                                  2021-09-06T21:05:42.936Z Structure:INFO Structure#1 starting controller interface vera (VeraController)
                                  2021-09-06T21:05:42.944Z Structure:INFO Structure#1 starting controller interface hubitat (HubitatController)
                                  2021-09-06T21:05:42.947Z Structure:INFO Structure#1 starting controller interface reactor_system (SystemController)
                                  2021-09-06T21:05:43.018Z default:null Module VeraController v21236
                                  2021-09-06T21:05:43.026Z default:null Module HubitatController v21243
                                  2021-09-06T21:05:43.029Z default:null Module SystemController v21102
                                  2021-09-06T21:05:43.037Z VeraController:NOTICE VeraController#vera starting
                                  2021-09-06T21:05:43.145Z VeraController:INFO VeraController#vera loaded mapping ver 21236 rev 1 format 1 notice
                                  2021-09-06T21:05:43.148Z VeraController:INFO VeraController: deviceclass vera_system_object capability sys_system does not provide attribute state
                                  2021-09-06T21:05:43.227Z Controller:NOTICE Controller SystemController#reactor_system is now online.
                                  2021-09-06T21:05:43.339Z app:INFO Structure running; pausing for controllers' initial ready
                                  2021-09-06T21:05:43.347Z Controller:NOTICE HubitatController#hubitat not ready; performing initial connect/query
                                  2021-09-06T21:05:43.896Z VeraController:NOTICE Controller VeraController#vera is now online.
                                  2021-09-06T21:05:45.291Z Controller:ERR HubitatController#hubitat mapped capability x_hubitat_healthcheck has no implementation
                                  2021-09-06T21:05:45.322Z Controller:ERR HubitatController#hubitat mapped capability x_hubitat_healthcheck has no implementation
                                  2021-09-06T21:05:45.383Z Controller:ERR HubitatController#hubitat mapped capability x_hubitat_healthcheck has no implementation
                                  2021-09-06T21:05:45.387Z Controller:ERR HubitatController#hubitat mapped capability x_hubitat_healthcheck has no implementation
                                  2021-09-06T21:05:45.391Z Controller:ERR HubitatController#hubitat mapped capability x_hubitat_healthcheck has no implementation
                                  2021-09-06T21:05:45.394Z Controller:ERR HubitatController#hubitat mapped capability x_hubitat_healthcheck has no implementation
                                  2021-09-06T21:05:45.409Z Controller:ERR HubitatController#hubitat mapped capability x_hubitat_healthcheck has no implementation
                                  2021-09-06T21:05:45.414Z Controller:ERR HubitatController#hubitat mapped capability x_hubitat_healthcheck has no implementation
                                  2021-09-06T21:05:45.418Z Controller:ERR HubitatController#hubitat mapped capability x_hubitat_healthcheck has no implementation
                                  2021-09-06T21:05:45.510Z Controller:INFO HubitatController#hubitat connecting to hub's eventsocket WebSocket API at ws://192.168.68.145/eventsocket
                                  2021-09-06T21:05:45.517Z Controller:NOTICE Controller HubitatController#hubitat is now online.
                                  2021-09-06T21:05:45.522Z app:NOTICE Starting Reaction Engine...
                                  2021-09-06T21:05:45.524Z Engine:INFO Reaction Engine starting
                                  2021-09-06T21:05:45.525Z Engine:INFO Checking rule sets...
                                  2021-09-06T21:05:45.542Z Engine:INFO Checking rules...
                                  2021-09-06T21:05:45.544Z Engine:INFO Data check complete; no corrections.

                                  1 Reply Last reply
                                  0
                                  • toggledbitsT Offline
                                    toggledbitsT Offline
                                    toggledbits
                                    wrote on last edited by
                                    #40

                                    That's better. OK, no more command line. Do this as well:

                                        sudo systemctl enable reactor
                                    

                                    This will tell systemd to start Reactor at boot (which you should then test). If you have any other mechanism for starting Reactor at boot (e.g. modified .profile or bashrc files), then those will need to be removed/disabled.

                                    Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                                    toggledbitsT 1 Reply Last reply
                                    0
                                    • M Offline
                                      M Offline
                                      Matteburk
                                      wrote on last edited by
                                      #41

                                      ok... what does that line do?

                                      got this
                                      pi@raspberrypi:~ $ sudo systemctl enable reactor
                                      Created symlink /etc/systemd/system/multi-user.target.wants/reactor.service \u2192 /etc/systemd/system/reactor.service.
                                      pi@raspberrypi:~ $

                                      1 Reply Last reply
                                      0
                                      • toggledbitsT toggledbits

                                        That's better. OK, no more command line. Do this as well:

                                            sudo systemctl enable reactor
                                        

                                        This will tell systemd to start Reactor at boot (which you should then test). If you have any other mechanism for starting Reactor at boot (e.g. modified .profile or bashrc files), then those will need to be removed/disabled.

                                        toggledbitsT Offline
                                        toggledbitsT Offline
                                        toggledbits
                                        wrote on last edited by
                                        #42

                                        @toggledbits said in Updated to latest MSR 21243 and no entities are being executed I Hubitat:

                                        This will tell systemd to start Reactor at boot (which you should then test). If you have any other mechanism for starting Reactor at boot (e.g. modified .profile or bashrc files), then those will need to be removed/disabled.

                                        Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                                        M 1 Reply Last reply
                                        0
                                        • toggledbitsT toggledbits

                                          @toggledbits said in Updated to latest MSR 21243 and no entities are being executed I Hubitat:

                                          This will tell systemd to start Reactor at boot (which you should then test). If you have any other mechanism for starting Reactor at boot (e.g. modified .profile or bashrc files), then those will need to be removed/disabled.

                                          M Offline
                                          M Offline
                                          Matteburk
                                          wrote on last edited by
                                          #43

                                          @toggledbits
                                          ok.... I cut the power and restarted the pie and msr got up by it self!!

                                          Coool!

                                          1 Reply Last reply
                                          0
                                          Reply
                                          • Reply as topic
                                          Log in to reply
                                          • Oldest to Newest
                                          • Newest to Oldest
                                          • Most Votes


                                          Recent Topics

                                          • Set reaction triggering wrong z-wave device
                                            T
                                            tamorgen
                                            0
                                            4
                                            21

                                          • Can you run MSR on Home Assistant OS ?
                                            toggledbitsT
                                            toggledbits
                                            0
                                            11
                                            94

                                          • RPi Alternative: Orange Pi 4 LTS (3GB RAM/16GB eMMC)
                                            toggledbitsT
                                            toggledbits
                                            0
                                            2
                                            1.7k

                                          • RPi Alternative: Orange Pi Zero 2 (1GB)
                                            toggledbitsT
                                            toggledbits
                                            2
                                            3
                                            3.5k

                                          • RPi Alternative: Libre Computer AML-S905X-CC "Le Potato" (2GB RAM)
                                            toggledbitsT
                                            toggledbits
                                            5
                                            6
                                            3.1k

                                          • HA and AI
                                            therealdbT
                                            therealdb
                                            0
                                            4
                                            139

                                          • How to upgrade from an old version of MSR?
                                            CatmanV2C
                                            CatmanV2
                                            0
                                            26
                                            372

                                          • This trigger no longer working - complaining about the operator needing changing
                                            toggledbitsT
                                            toggledbits
                                            0
                                            18
                                            119

                                          • Self test
                                            CatmanV2C
                                            CatmanV2
                                            0
                                            3
                                            112

                                          • Access control - allowing anonymous user to dashboard
                                            toggledbitsT
                                            toggledbits
                                            0
                                            2
                                            124

                                          • VEC Virtual Switch Auto Off
                                            S
                                            SweetGenius
                                            1
                                            1
                                            85

                                          • Upcoming Storage Change -- Got Back-ups?
                                            toggledbitsT
                                            toggledbits
                                            3
                                            1
                                            82
                                          Powered by NodeBB | Contributors
                                          Hosted freely by 10RUPTiV - Solutions Technologiques | Contact us
                                          • Login

                                          • Don't have an account? Register

                                          • Login or register to search.
                                          • First post
                                            Last post
                                          0
                                          • Categories
                                          • Recent
                                          • Tags
                                          • Popular
                                          • Unsolved