Skip to content
  • Categories
  • Recent
  • Tags
  • Popular
  • Unsolved
Collapse
Discussion Forum to share and further the development of home control and automation, independent of platforms.
  1. Home
  2. Software
  3. Multi-System Reactor
  4. [Solved]Global Expression with null value and Auto-Evaluation
UI not loading after upgrading to 26318
tunnusT
Sorry for a hasty post, will update some details later, but the scenario is that I managed to type a wrong password for too many times and had the following users.yaml section: authtrack: max_attempts: 4 within_minutes: 180 # 180 minutes = 3 hrs block_expiration_minutes: 10080 # 7 days At this time I used build 26298. Then noticed there's a new build with a bypass blocking feature (and yes, it said it won't remove existing block). Anyway, went ahead and upgraded to 26318, but the problem now is that UI is not loading at all (page does not answer). This also means that I cannot use "http://reactor_host:port/diag/clear_authtrack?askauth" command to clear the block (or use any other source IP for login). Docker container stays up & running and does not exit. I'll try to dig up some logs, but anything that I could immediately try out (could I delete a particular file for example)? EDIT: some logs [latest-26318]2026-11-17T20:42:32.337Z <Rule:INFO> MSR startup (rule-lculfnhm in Miscellaneous) started [latest-26318]2026-11-17T20:42:32.343Z <httpapi:NOTICE> httpapi#1 HTTP server listening on :::8111 [latest-26318]2026-11-17T20:42:32.347Z <httpapi:INFO> httpapi#1 local docs found in /opt/reactor/docs/html; setting up static service [latest-26318]2026-11-17T20:42:32.354Z <app:NOTICE> Starting WSAPI... [latest-26318]2026-11-17T20:42:32.355Z <wsapi:NOTICE> wsapi: starting version 26298 protocol [latest-26318]2026-11-17T20:42:32.523Z <Engine:INFO> Engine#1 master timer tick, local time "17/11/2026 22:42:32" (TZ offset 120 mins from UTC) [latest-26318]2026-11-17T20:42:32.542Z <Engine:NOTICE> Starting reaction MSR startup<SET> (rule-lculfnhm:S) [latest-26318]2026-11-17T20:42:32.545Z <Notifier:null> Module Notifier v26186 [latest-26318]2026-11-17T20:42:32.545Z <Engine:INFO> MSR startup<SET> all actions completed. [latest-26318]2026-11-17T20:42:32.557Z <Rule:INFO> Rule#rule-lculfnhm reaction rule-lculfnhm:S completed [latest-26318]2026-11-17T20:42:32.558Z <default:null> Module NotifyTelegram v26177
Multi-System Reactor
[Resolved] Hubitat upgrade 2.5.3.123 may have broken login
3
Topic thumbnail image
Multi-System Reactor
Reactor (Multi-System/Multi-Hub) Announcements
toggledbitsT
Build 21228 has been released. Docker images available from DockerHub as usual, and bare-metal packages here. Home Assistant up to version 2021.8.6 supported; the online version of the manual will now state the current supported versions; Fix an error in OWMWeatherController that could cause it to stop updating; Unify the approach to entity filtering on all hub interface classes (controllers); this works for device entities only; it may be extended to other entities later; Improve error detail in messages for EzloController during auth phase; Add isRuleSet() and isRuleEnabled() functions to expressions extensions; Implement set action for lock and passage capabilities (makes them more easily scriptable in some cases); Fix a place in the UI where 24-hour time was not being displayed.
Multi-System Reactor
Reactor Inspect - a small read-only helper panel for MSR
wmarcolinW
Topic thumbnail image
Multi-System Reactor
Reverse proxy & API ACL
tunnusT
I'm trying to allow anonymous access from a local network to /api/v1/log, but the problem now with the reverse proxy configuration is that this access is open via proxy to the internet. At least I wasn't able to configure ACL so that only an access from a local network would be permitted. reactor.yaml: baseurl: "http://192.168.1.12:8111" proxy_baseurl: "https://external.com:30000" trusted_proxy: "192.168.1.12" Local traffic would originate from 192.168.1.0/24 network. Synology is acting as a reverse proxy and hosting MSR as a docker container (which has its own network and IP 172.18.0.5). MSR build is latest-26298-fbb75fb8 users.yaml: - url: "/api/v1/log" method: "GET" source_ip: 172.18.0.0/24 allow: true Using the above ACL works, but it enables access via proxy also. If I use source_ip: 192.168.1.0/24, then it doesn't work either locally or remotely. So I'm kinda lost what should I use as source_ip in this case?
Multi-System Reactor
MFA
T
Topic thumbnail image
Multi-System Reactor
Grouped devices
G
I've seen many of you using Dynamic Group Controller. I'm using it myself for monitoring device battery levels. I've read and re-read the Dynamic Group Controller docs and still cannot come to an answer for my question so let me paint my scenario: I've migrated from EchoSpeaks in Hubitat ('cause borked and seemingly unmaintained) to Alexa Devices in Home Assistant ('cause not borked in 2026.11.0) to be able to send TTS to my Echo devices. In EchoSpeaks I could create groups. Sweet. In Alexa Devices I don't seem to be able to do so. As such, my thought was "wait - isn't there a way in MSR?" Is this an effective scenario that Dynamic Group Controller can be used for?
Multi-System Reactor
Login protections
tunnusT
Topic thumbnail image
Multi-System Reactor
Reactor Build 26284 stuck at Loading Reactor UI
T
Topic thumbnail image
Multi-System Reactor
MSR with reverse proxy
tunnusT
I'm trying to use MSR via reserve proxy in Synology DSM, but MSR page does not load https://<public ip>:30000/reactor/en-US/ At the same time logging page loads normally https://<public ip>:30000/api/v1/log I thought maybe authentication was messing it up, but there was no deny entries in the log, and also disabling authentication did not make any difference. For this use case VPN is not an option (that works, but as said not an option for this particular use case). Any ideas what could cause this? MSR build latest-26242-28d69aa8, Chrome browser
Multi-System Reactor
Missing attribute after upgrade
3
Topic thumbnail image
Multi-System Reactor
[MSR] Native fan capabilty
therealdbT
Nothing more to add. I see we have hvac_blower, but, anyway, maybe a native fan on the same assumptions of the fan from HASS could be reasonable. I have a couple of them. ie, this is from ESPHome via HASS. x_hass.domain="fan" x_hass.entity_id="fan.kitchen_seashell_hood_ventilation_fan" x_hass.floor_id=null x_hass.services=["fan","esphome"] x_hass.source="esphome" x_hass.state="off" x_hass_attr.friendly_name="Seashell Hood Ventilation Fan" x_hass_attr.percentage=50 x_hass_attr.percentage_step=25 x_hass_attr.preset_mode="" x_hass_attr.preset_modes=[] x_hass_attr.supported_features=49 Thanks.
Multi-System Reactor
[MSR] Rule do not fire
therealdbT
Topic thumbnail image
Multi-System Reactor
Rule condition shows TRUE in UI but Rule never transitions to SET — survives full restart
N
Build: latest-26221-b25bb3e3, Docker on Synology. Hi, I have a Rule whose Trigger/Constraints reference other Rules via Rule State ... is TRUE. At some point it stops firing. Expanding the rule's condition tree in the UI shows every Trigger and Constraint condition green/TRUE — confirmed live by walking into the room and watching Motion go true in real time. Rule History shows no new SET, just old reset entries. Tried, on the same rule, same evening: recreating the trigger conditions with fresh IDs, recreating the constraint conditions with fresh IDs (flat and wrapped in a new Group — wrapping in a Group produced one SET, but it didn't reproduce on repeat attempts with the same structure), and finally a full container restart with a verified-correct saved rule. Still no SET, even with a fresh live motion event right after the restart. Separately, I found that this rule (and its 10 per-room clones) share identical internal condition/group IDs with each other — leftover from a batch clone done months ago, never regenerated. Not sure if that's related, since fixing the IDs didn't reliably fix the symptom either. Has anyone seen a Rule State condition show TRUE in the UI without the Rule ever producing a SET, surviving a clean restart? Thanks in advance
Multi-System Reactor
DynamicGroupController and attributes
therealdbT
Hey @toggledbits I'm back to trying to optimize a couple of things based on dynamic group. First of all, I think I found a typo in the doc: primary_attribute: "binary_sensor.state" primary_attribute_value: | d = false; each id in members: d = getEntity(id)?.attributes?.power_switch?.state or d, d I think the correct code snippet is d = false, All that said, my use case for dynamic groups is to group 3 different climate devices, so I could easily command them at the same time. Commands are good, but sometimes I want to check if any of the devices are on, and that's easily done with a similar snippet as the one you have in the docs. But this is limited to the primary attribute, while I want to have any of the attributes in the group to be driven by a similar logic (while all are null in the group). ie, access hvac_control.mode and see if any of the unit is set to cool, or heat. Is that possible, without re-defining an expression in each of my rules? Thanks!
Multi-System Reactor
Unofficial thread for compatibility
tunnusT
As there are statements about compatibility for home assistant versions in MSR new version announcements (e.g. "HassController: Bless Hass to 2025.7.3"), I thought it would be good idea to track other controllers as well. As an example, I can confirm that build "latest-25208-c53e8513" works with Hubitat Elevation C-8 platform version 2.4.2.134 using Maker API. Updates: (the latest versions first in the list) OK: build "latest-25264-2fbe9217" with Hubitat C-8 platform v. 2.4.3.123
Multi-System Reactor
Ooops - Deleted Reactor Ex Machina II
R
I accidentally deleted Reactor Ex Machina II (REM II) from my Reactor rules. I tried to recover it by deleting the .json and .dval in the Rules subdirectory and then recreating it from Togglebits original posting, but that did not work. Does anyone know how to recover REM ll ?
Multi-System Reactor
Bail out of failed reaction?
T
Topic thumbnail image
Multi-System Reactor
Arming Envisalink panel from MSR
T
Topic thumbnail image
Multi-System Reactor
[Solved] DynamicGroupController updating members issue
CrilleC
Edit: Solved in latest-26221. Bare-metal latest-26193 I have this group: "OKforLarm": name: OK för Larm select: - include_controller: vera - include_capability: door_sensor filter_expression: entity.attributes.door_sensor.state It contains the entities I expect but behaves a bit odd. When I open vera>device_10097 the entity attribute door_sensor.state changes to true but it won't show up as member in the group, when I also open vera>device_10095 they both shows as members and when I close vera>device_10095 it disappear from the group but when I close vera>device_10097 it lingers in the group until I restart Reactor.
Multi-System Reactor

[Solved]Global Expression with null value and Auto-Evaluation

Scheduled Pinned Locked Moved Multi-System Reactor
16 Posts 4 Posters 3.6k Views 4 Watching
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • V Offline
    V Offline
    vezinpi
    wrote on last edited by
    #3

    This is a good day. I have learned something again.

    Many thanks for your support.

    Using MSR 26177 on Docker, on a Raspberry Pi with Trixie. Home Assistant 2026.08, Z-Wave JS-UI 11.21.1

    1 Reply Last reply
    2
    • V Offline
      V Offline
      vezinpi
      wrote on last edited by vezinpi
      #4

      @toggledbits I might have celebrated a bit too soon on that one. After doing the change all seemed fine. Tested the null value and a temperature change and all was working as advertised. After a certain time I am getting an error and the container crashes and cannot be re-started. By looking at the container log, I can see some issues with the file sys_alerts.json. Indeed the file is still in the storage folder but has a size of 0 byte and is complety empty. I replaced the empty file by the original one (I keept a copy of all files of the reactor folder after the original install) and was able to restart the container but it eventually crashed again. I changed the OutsideTemp expression back to what is was and I am back to normal. I am in the process of collecting log info and whatever might be relevant to investigate. It does seemed similar to my original problem where the expression is self trigering and get caught in a loop. I will be in and out this week so it may take some time before I get back to you. In the interim here is a screen capture of the error:

      36833887-cd63-44ea-a125-d6b0fb242330-image.png

      Using MSR 26177 on Docker, on a Raspberry Pi with Trixie. Home Assistant 2026.08, Z-Wave JS-UI 11.21.1

      wmarcolinW toggledbitsT 2 Replies Last reply
      0
      • therealdbT Offline
        therealdbT Offline
        therealdb
        wrote on last edited by
        #5

        it's a classic situation of stack overflow. you'd probably just set a value (like "unavailable") on startup and a constraint on the rule. That's what I'm doing anyway for a couple of things that send spurious values from time to time.

        --
        On a mission to automate everything.

        My MS Reactor contrib
        My Luup Plug-ins

        1 Reply Last reply
        0
        • V vezinpi

          @toggledbits I might have celebrated a bit too soon on that one. After doing the change all seemed fine. Tested the null value and a temperature change and all was working as advertised. After a certain time I am getting an error and the container crashes and cannot be re-started. By looking at the container log, I can see some issues with the file sys_alerts.json. Indeed the file is still in the storage folder but has a size of 0 byte and is complety empty. I replaced the empty file by the original one (I keept a copy of all files of the reactor folder after the original install) and was able to restart the container but it eventually crashed again. I changed the OutsideTemp expression back to what is was and I am back to normal. I am in the process of collecting log info and whatever might be relevant to investigate. It does seemed similar to my original problem where the expression is self trigering and get caught in a loop. I will be in and out this week so it may take some time before I get back to you. In the interim here is a screen capture of the error:

          36833887-cd63-44ea-a125-d6b0fb242330-image.png

          wmarcolinW Offline
          wmarcolinW Offline
          wmarcolin
          wrote on last edited by
          #6

          @vezinpi

          In the engine group config (reacotr.yaml), add this parameter:

          update_rate_limit: 300
          

          This solved my problem and did not harm the system at all.

          Thanks.

          toggledbitsT 1 Reply Last reply
          0
          • toggledbitsT Offline
            toggledbitsT Offline
            toggledbits
            wrote on last edited by toggledbits
            #7

            Can you post all the expressions as you have them now? That's a pretty unusual error message. There's a distinction between evaluation and compilation, and I'm very meticulous about making sure the message reports the right one. The alert shows that the compilation is the problem, which suggests the expression isn't written properly somehow. I need to see what you've got.

            Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

            1 Reply Last reply
            0
            • wmarcolinW wmarcolin

              @vezinpi

              In the engine group config (reacotr.yaml), add this parameter:

              update_rate_limit: 300
              

              This solved my problem and did not harm the system at all.

              Thanks.

              toggledbitsT Offline
              toggledbitsT Offline
              toggledbits
              wrote on last edited by toggledbits
              #8

              @wmarcolin update_rate_limit has no effect on global variable evaluation, FYI. That's a control/config for rule evaluations. Global variables have no equivalent config value, it's really not needed. I think there's (a) a problem with the expression that's causing a compilation error, and (b) a problem handling the compilation error that's causing the loop/stack overflow. Once (b) is fixed we'll be back to "no rate limiting needed here" status.

              Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

              wmarcolinW 1 Reply Last reply
              1
              • toggledbitsT toggledbits

                @wmarcolin update_rate_limit has no effect on global variable evaluation, FYI. That's a control/config for rule evaluations. Global variables have no equivalent config value, it's really not needed. I think there's (a) a problem with the expression that's causing a compilation error, and (b) a problem handling the compilation error that's causing the loop/stack overflow. Once (b) is fixed we'll be back to "no rate limiting needed here" status.

                wmarcolinW Offline
                wmarcolinW Offline
                wmarcolin
                wrote on last edited by
                #9

                @toggledbits ok, understood!
                Thanks.

                1 Reply Last reply
                0
                • V Offline
                  V Offline
                  vezinpi
                  wrote on last edited by vezinpi
                  #10

                  Here it is, as requested. Getting the logs, standby...

                  523ba299-471f-4675-9a8f-de76622065cf-image.png

                  Using MSR 26177 on Docker, on a Raspberry Pi with Trixie. Home Assistant 2026.08, Z-Wave JS-UI 11.21.1

                  1 Reply Last reply
                  0
                  • V Offline
                    V Offline
                    vezinpi
                    wrote on last edited by vezinpi
                    #11

                    MSR Logs. It is quite long with the middle repeating OutsideTemp so I copied the start and the end. After that it repeats. I did preserved the logs so if you want more let me know.

                    This is how (I think) it started

                    GlobalExpression#CurrentHumid
                    [latest-22002]2022-01-04T17:33:01.558Z Rule:5:813:Rule.js Rule#rule-grpqosf66u Humidifier On requesting eval; expression-state-changed from GlobalExpression#CurrentHumid
                    [latest-22002]2022-01-04T17:33:01.559Z Rule:5:813:Rule.js Rule#rule-grpqoyiumi Humidifier Off requesting eval; expression-state-changed from GlobalExpression#CurrentHumid
                    [latest-22002]2022-01-04T17:33:01.560Z Rule:5:813:Rule.js Rule#rule-kwz0myt1 Low Humidity To Hass requesting eval; data-changed from Data#states:expr-global-CurrentHumid
                    [latest-22002]2022-01-04T17:33:01.561Z Rule:5:1009:Rule.js Rule#rule-kwz0myt1 evaluation in progress; waiting for completion
                    [latest-22002]2022-01-04T17:33:01.562Z Rule:5:813:Rule.js Rule#rule-grpqosf66u Humidifier On requesting eval; data-changed from Data#states:expr-global-CurrentHumid
                    [latest-22002]2022-01-04T17:33:01.563Z Rule:5:1009:Rule.js Rule#rule-grpqosf66u evaluation in progress; waiting for completion
                    [latest-22002]2022-01-04T17:33:01.564Z Rule:5:813:Rule.js Rule#rule-grpqoyiumi Humidifier Off requesting eval; data-changed from Data#states:expr-global-CurrentHumid
                    [latest-22002]2022-01-04T17:33:01.565Z Rule:5:1009:Rule.js Rule#rule-grpqoyiumi evaluation in progress; waiting for completion
                    [latest-22002]2022-01-04T17:33:01.566Z Engine:5:984:Engine.js [Engine]Engine#1 var CurrentHumid changed, evaluating dependent child LowHumidity
                    [latest-22002]2022-01-04T17:33:02.407Z Engine:ERR [Engine]Engine#1: error evaluating expression OutsideTemp: [RangeError]RangeError: Maximum call stack size exceeded
                    [latest-22002]2022-01-04T17:33:02.411Z Engine:ERR [Engine]Engine#1: expression: getEntity( "hass>sensor_ottawa_kanata_orleans_temperature" ).attributes?.temperature_sensor?.value ?? OutsideTemp
                    [latest-22002]2022-01-04T17:33:02.411Z Engine:ERR [Engine]Engine#1: path LowHumidity->CalculatedHumid->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp

                    And this is how it ended

                    OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp->OutsideTemp
                    [latest-22002]2022-01-04T17:33:02.415Z Engine:CRIT RangeError: Maximum call stack size exceeded
                    RangeError: Maximum call stack size exceeded
                    at /opt/reactor/server/lib/Logger.js:434:21
                    at Array.forEach (<anonymous>)
                    at Logger._emit_streams (/opt/reactor/server/lib/Logger.js:428:57)
                    at Logger._emit_streams (/opt/reactor/server/lib/Logger.js:436:71)
                    at Logger._emit_streams (/opt/reactor/server/lib/Logger.js:436:71)
                    at Logger._emit (/opt/reactor/server/lib/Logger.js:423:35)
                    at Logger.err (/opt/reactor/server/lib/Logger.js:452:31)
                    at Engine._eval_expr (/opt/reactor/server/lib/Engine.js:954:57)
                    at Engine._expr_resolve (/opt/reactor/server/lib/Engine.js:1217:38)
                    at _resolve (/opt/reactor/common/lexp.js:1217:35)
                    [latest-22002]2022-01-04T17:33:02.416Z Engine:ERR [Engine]Engine#1: error evaluating expression OutsideTemp: [RangeError]RangeError: Maximum call stack size exceeded
                    [latest-22002]2022-01-04T17:33:02.416Z Engine:ERR [Engine]Engine#1: expression: getEntity( "hass>sensor_ottawa_kanata_orleans_temperature" ).attributes?.temperature_sensor?.value ?? OutsideTemp

                    Using MSR 26177 on Docker, on a Raspberry Pi with Trixie. Home Assistant 2026.08, Z-Wave JS-UI 11.21.1

                    1 Reply Last reply
                    0
                    • toggledbitsT Offline
                      toggledbitsT Offline
                      toggledbits
                      wrote on last edited by
                      #12

                      OK. I'm busy this afternoon, but will look at it later today.

                      Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                      1 Reply Last reply
                      0
                      • toggledbitsT Offline
                        toggledbitsT Offline
                        toggledbits
                        wrote on last edited by
                        #13

                        OK. I think I have this nailed down. Sorry it took me so long, I was working on an edge case to make sure the system stays in control under the worst of conditions. Is essence, as I suspected, the first issue is that the dependency loop check had an error and wasn't always working. In addition, I've added additional checks for more cases where a loop may evade the first check. Also, the system should remain in control if a loop does sneak by the checks, rather than hanging.

                        Build will be published shortly...

                        Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                        V 1 Reply Last reply
                        0
                        • V vezinpi

                          @toggledbits I might have celebrated a bit too soon on that one. After doing the change all seemed fine. Tested the null value and a temperature change and all was working as advertised. After a certain time I am getting an error and the container crashes and cannot be re-started. By looking at the container log, I can see some issues with the file sys_alerts.json. Indeed the file is still in the storage folder but has a size of 0 byte and is complety empty. I replaced the empty file by the original one (I keept a copy of all files of the reactor folder after the original install) and was able to restart the container but it eventually crashed again. I changed the OutsideTemp expression back to what is was and I am back to normal. I am in the process of collecting log info and whatever might be relevant to investigate. It does seemed similar to my original problem where the expression is self trigering and get caught in a loop. I will be in and out this week so it may take some time before I get back to you. In the interim here is a screen capture of the error:

                          36833887-cd63-44ea-a125-d6b0fb242330-image.png

                          toggledbitsT Offline
                          toggledbitsT Offline
                          toggledbits
                          wrote on last edited by
                          #14

                          @vezinpi I've added one additional guard to the expression in the post linked below. You should make that edit as well during your upgrade.

                          https://smarthome.community/post/11053

                          Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                          1 Reply Last reply
                          0
                          • toggledbitsT toggledbits

                            OK. I think I have this nailed down. Sorry it took me so long, I was working on an edge case to make sure the system stays in control under the worst of conditions. Is essence, as I suspected, the first issue is that the dependency loop check had an error and wasn't always working. In addition, I've added additional checks for more cases where a loop may evade the first check. Also, the system should remain in control if a loop does sneak by the checks, rather than hanging.

                            Build will be published shortly...

                            V Offline
                            V Offline
                            vezinpi
                            wrote on last edited by
                            #15

                            @toggledbits said in Global Expression with null value and Auto-Evaluation:

                            OK. I think I have this nailed down. Sorry it took me so long

                            You have nothing to be sorry about. Being aware of a potential issue, evaluating the problem, developping a solution and posting a new version in the same day, is really remarquable and almost unheard of now a day.

                            Thanks you for your dedication.

                            Using MSR 26177 on Docker, on a Raspberry Pi with Trixie. Home Assistant 2026.08, Z-Wave JS-UI 11.21.1

                            1 Reply Last reply
                            2
                            • V Offline
                              V Offline
                              vezinpi
                              wrote on last edited by
                              #16

                              Installed the new version yesterday along with the new guard and all is still fine this morning. Considering that it was failing very quickly before, I consider that issue fixed.

                              Using MSR 26177 on Docker, on a Raspberry Pi with Trixie. Home Assistant 2026.08, Z-Wave JS-UI 11.21.1

                              1 Reply Last reply
                              1
                              Reply
                              • Reply as topic
                              Log in to reply
                              • Oldest to Newest
                              • Newest to Oldest
                              • Most Votes


                              Recent Topics

                              • UI not loading after upgrading to 26318
                                tunnusT
                                tunnus
                                0
                                3
                                68

                              • [Resolved] Hubitat upgrade 2.5.3.123 may have broken login
                                toggledbitsT
                                toggledbits
                                0
                                8
                                270

                              • Reactor (Multi-System/Multi-Hub) Announcements
                                toggledbitsT
                                toggledbits
                                5
                                153
                                163.0k

                              • Reactor Inspect - a small read-only helper panel for MSR
                                G
                                gwp1
                                2
                                8
                                599

                              • Reverse proxy & API ACL
                                tunnusT
                                tunnus
                                0
                                9
                                494

                              • MFA
                                T
                                tamorgen
                                0
                                28
                                1.4k

                              • Grouped devices
                                G
                                gwp1
                                0
                                3
                                194

                              • Login protections
                                toggledbitsT
                                toggledbits
                                0
                                2
                                236

                              • Reactor Build 26284 stuck at Loading Reactor UI
                                T
                                tamorgen
                                0
                                16
                                1.8k

                              • MSR with reverse proxy
                                tunnusT
                                tunnus
                                0
                                12
                                896

                              • Missing attribute after upgrade
                                3
                                3rdStng
                                0
                                3
                                692

                              • Use of Google Gemini as an MSR and Hubitat configuration aid
                                therealdbT
                                therealdb
                                0
                                2
                                326
                              Powered by NodeBB | Contributors
                              Hosted freely by 10RUPTiV - Solutions Technologiques | Contact us
                              • Login

                              • Don't have an account? Register

                              • Login or register to search.
                              • First post
                                Last post
                              0
                              • Categories
                              • Recent
                              • Tags
                              • Popular
                              • Unsolved