Hello,
I had an iCOMEN boiler switch that worked for many years. And I used iCOMEN app on my phone to manage it. Short time ago app started to have an error message that it cannot connect to the server, and after some time the device also stopped working.
Some of you may know that I took at shot at building an alternate geofencing solution for Vera. The core of it was system agnostic, using the OwnTracks application and AWS lambdas to track devices and keep a central data, then disseminate that to the Vera via a websocket-based plugin. It worked with other apps as well, including Tasker and GPSLogger, but of the dozen people that were testing it, most used OwnTracks.
A lot was learned in the process, not the least of which is that the success of any such solution is highly dependent on the phone and its settings. Phone manufacturers love to set things up for the longest battery life, of course, but that's usually very anti-geofencing behavior. In the case of at least one brand, it was unusable and the settings could not be modified. It was also cost-prohibitive to maintain on Amazon, as AWS grabs a dime here and a dollar there and before you know it, it added $100/month to my AWS bill, which my wife deducted from my Scotch budget. Unacceptable.
But it's quite reasonable to use OwnTracks to a local endpoint, and I could pretty easily replicate the functionality as a local application, or maybe even as an additional endpoint built into MSR's API (still separate port and process, but in the package).
So the question really is... would you do it, or would you be too concerned about the security risks associated (e.g., dynamic DNS and NAT mapping in the firewall necessary for the phone to contact the service when not on LAN)?
Hello forum instigators.
Not sure who host/runs the forum software but a couple of challenges:
The chat is not currently usable, as the scrolling is all not right and it's not possible to read chats or send chats reliably.
There are a lot of female members that should perhaps be on another forum; where they can advertise their skills more appropriately. Note: I agree it's a job, like any other.
Whoever you are - thank you for your invaluable work.
I run a B&B and am looking for a way to turn the lights off whenever a room is unoccupied for X amount of time. The guest should still be able to turn the lights on and off manually, but should not be able to disable the auto turn off feature if the room is unoccupied.
I guess I am looking for a light switch with a built in presence sensor? I guess a presence sensor would be better as if it is a motion sensor, the lights may go off unwanted if the guest fails to make sufficient movement e.g. if the guest is lying down watching a film.
Are there any products on the market that would work for my application?
I currently have an HVAC system in the attic - for heating and A/C. 120v is supplied to the unit to run the gas heating. A/C uses 240v. I have an ecobee thermostat...which sometimes goes offline....not often. When it goes offline, I need to turn the 120v power to the HVAC system off and then back on (the ecobee gets its power from the HVAC system). That resets the ecobee and all is fine. I spend the summer away from this house and if the ecobee goes offine..I have no current method to reset the HVAC 120v power remotely. My idea is to replace the current 120v plug in the attic with a smart plug...then I can remotely turn the 120v power off and the ecobee will reset and come back online. I use Wyze and Lutron Casita in the house currently and was hoping I could find an in-wall smart plug from Wyze or Lutron. Obviously, I don't need diming, etc...just the ability to turn the plug power on/off. I've seen some options...but one problem I have is the attic can reach up to 135F in the summer...many of the smart plugs I've seen are not rated for that temperature. Might any of you have any thoughts on a smart plug I might want to look at? I don't want to invest in anything that would require a new hub - so either WiFi based or Casita HUB based. I need 120v and 15amp ratings. Thanks in advance.
Hello,
I am in search of a device capable of using Bluetooth to connect with a smartphone and serve as its primary sound source on demand. This device should function similarly to conventional Bluetooth headphones, which automatically become the phone's sound output upon activation. However, this device should differ in that it transmits the audio signal to an amplifier via a jack, SPDIF, or similar connection. Alternatively, it could be an integrated amplifier that directly sends the signal to passive speakers.
The control of this process should be manageable through an API such as MQTT, REST, MODBUS, or similar. Are you aware of any devices that operate in this manner?
The concept is as follows: upon entering the bathroom, I would press a wall-mounted switch. This switch would send a signal to the Bluetooth device, prompting it to connect to my smartphone and seamlessly continue playing the audiobook I am currently listening to. Instead of using the phone's speakers, it would seamlessly start playing through ceiling-mounted speakers.
Many thanks 🙂
Hi folks,
I currently have some cheap Zigbee hub and some Amazon Alexas running my smart home which mostly consists of Zigbee power strips and Zigbee battery powered switches.
It all worked OK originally, but now whenever I press a Zigbee switch the light in the corresponding plug switches on then immediately off again.
If I ask Alexa to turn the light on it works fine. Likewise if I switch it on from my phone.
Any ideas what the issue could be?
I've tried unplugging the hub a number of times but that doesn't seem to fix it.
I was thinking about getting a Homey Pro 2023 to speed things up (tmas the Zigbee hub seems to be really slow now as well, for some reason) but I'm not sure about that either.
Any suggestions greatly appreciated!
Looking for a recommendation:
Locksmith is trying to talk me into the Yale Assure Lock Touchscreen with Wi-Fi and Bluetooth - the original 1st generation because they said it's built better than the Assure Lock 2. Any thoughts on this? Which would you recommend?
I see Mul T Lock makes a cylinder (KW-KIDYRL) for Yale Smart Locks. Would this fit the 1st gen Assure Lock, as well as Assure Lock 2? Has anyone tried replacing the cylinder with this on either lock?
Other smart lock I was considering is the Schlage Encode Plus.
Thanks!
Hi. So when I had my house build I ran a bunch of stuff, one of which being two pairs of speaker wires to each bedroom and to 4 spots around my living room… Over the years I have used them here and there with different success.. But today they sit in my walls just unused.
I converted all the cat6 or 5e (I don’t remember) over to basically eithernet jacks. The cable coaxial well it’s there but now unused. But I was thinking there has got to be some use for two pairs of speaker wires to each room. Can I make them usb plugs? Not sure so looking for ideas.
Thanks in advance for your thoughts on this.
Kevin
Hey guys...
We are replacing the heat pump and furnace this week and I will also need to replace my nest thermostat at the same time 'cause Nest is ending the cloud thing end of the month.
Anyway, I'm looking to use the
T6 Pro Z-Wave Programmable Thermostat | Smart Home | Honeywell HomeThat's what the heat pump installer recommend BUT, using Nest I was also using it to control the home humidifier using a single wire connected to nest... but no low voltage thermostat is able to do that, I checked all of them...
So I need some help on how I can do that, to connect the home humidifier using zwave also....
Hi
We are looking for a solution where we can detect presence of a «thing» (people , car , dog, cat, and more..
We need:
fast detections, 1-3 seconds in range from 0 to 20 m from «base» fysical «client» , chip , transmitter , unit. base , receiver placed at a door, gate, house, etc uniq Identifying wirelessThe client:
no need for pressing any thing (no buttons) battery , hoply 2-5 years battery time.Have someone done anything like this?
What technologi will be best?
Hey everyone, I'm currently working on developing a bed sensor that can detect when you're out of bed. It could be used to trigger other smart home gadgets, like lights or blinds, temperature etc.
The sensors are placed under the legs of your bed post. Should look and feel like "smart furniture pads" with size 2 inches in diameter and 1/4 inch thick.
Before we go any further, I'd love to get your thoughts on this - would a bed sensor like this be something you'd find useful? We're still in the early stages of development, so any feedback you have would be greatly appreciated. Thanks in advance!
@DesT, fenced code blocks display differently after the upgrade.
abc defThe above should display as abc and def on two separate lines. This works. But this fails:
verbose: true config: data: "auto"The above should display as three lines, verbose: true, config: and data: "auto", but this fails. In order to make it display properly, I now have to open the fenced code block with ```text (specify language, generic text). This displays without highlighting. The words yml and yaml (and the all-caps versions) don't seem to be recognized. I can also use js to get JavaScript highlighting, but this isn't great for YAML. Here's the same block with the language (text) specifier added (no other changes):
verbose: true config: data: "auto"Sure, we can start adding language specifiers to our new posts, but I suspect if we start digging around old posts, we're going to find a lot of broken display of the fenced code blocks (plain ``` at the start with no language specifier) in the thousands of old posts in these forums, upon which people still rely for answers and information.
Log file snippets also get similarly brutalized:
[###BUILDVERSION###]2023-04-26T19:41:51.683Z <ZWaveJSController:NOTICE> ZWaveJSController#zwavejs added file logger to zwavejs.log [###BUILDVERSION###]2023-04-26T19:41:51.747Z <ZWaveJSController:WARN> zwavejs_capabilities defines x_zwave_device_cfg, which is not consistent with the recommended naming [###BUILDVERSION###]2023-04-26T19:41:51.747Z <ZWaveJSController:WARN> zwavejs_capabilities defines x_zwave_mfg_spec, which is not consistent with the recommended naming [###BUILDVERSION###]2023-04-26T19:41:51.747Z <ZWaveJSController:WARN> zwavejs_capabilities defines x_zwave_device_ver, which is not consistent with the recommended naming [###BUILDVERSION###]2023-04-26T19:41:51.747Z <ZWaveJSController:WARN> zwavejs_capabilities defines x_zwave_values, which is not consistent with the recommended naming [###BUILDVERSION###]2023-04-26T19:41:51.837Z <ZWaveJSController:INFO> ZWaveJSController#zwavejs connecting to ws://192.168.0.10:3000 [###BUILDVERSION###]2023-04-26T19:41:51.874Z <ZWaveJSController:NOTICE> ZWaveJSController#zwavejs connected [###BUILDVERSION###]2023-04-26T19:41:51.874Z <ZWaveJSController:INFO> ZWaveJSController#zwavejs sending connection initialization [###BUILDVERSION###]2023-04-26T19:41:51.931Z <ZWaveJSController:INFO> ZWaveJSController#zwavejs greeting from server: [Object]{ "type": "version", "driverVersion": "10.16.0", "serverVersion": "1.28.0", "homeId": 3631280043, "minSchemaVersion": 0, "maxSchemaVersion": 28 } [###BUILDVERSION###]2023-04-26T19:41:51.932Z <ZWaveJSController:INFO> ZWaveJSController#zwavejs performing initial inventory [###BUILDVERSION###]2023-04-26T19:41:52.325Z <ZWaveJSController:INFO> ZWaveJSController#zwavejs manufacturer-specific data for 134 (AEON Labs) from package ver 22315.1 [###BUILDVERSION###]2023-04-26T19:41:52.328Z <ZWaveJSController:INFO> ZWaveJSController#zwavejs configuring node 1 endpoint 0 (entity "1-0") [###BUILDVERSION###]2023-04-26T19:41:52.339Z <ZWaveJSController:INFO> ZWaveJSController#zwavejs manufacturer-specific data for 543 (Elexa Consumer Products Inc.)I think this is going to be a problem. Is there a way in NodeBB to configure the default language for fenced code block markdown for the entire forum so that these display more as they did before the upgrade?
EDIT: Examples below of old posts with corrupt formatting now:
https://smarthome.community/topic/1101/dynamic-groups-controller-filter-expressions
https://smarthome.community/post/11362
This last old post is interesting, because the first block displays incorrectly, but the second block is OK. In playing around, there seem to be triggering character sequences, suggesting that the markdown processor is trying to "guess" the language but not getting it right, perhaps:
Can anyone help with the MIOS UI5 weblink? Not the getvera one.
Still running UI5 on a couple of sensors & lights and need to tweak PLEG but for the life of me I can't remember the link to tunnel back to the trusty machine....
The wifi on my router is turned off, and wifi around the house is provided using a mesh - 3 units altogether (one connected directly to the router) that are spread around the house.
I would like to start automating certain tasks around the house and intend to try adding a few smart sockets to my setup.
The mesh system I have supports both 2.4GHz and 5GHz, and does not provide me with the option to control them - i.e. turn one or both on/off, give each a different SSID, etc.
The devices I wish to purchase/use only support 2.4GHz.
Will turning the mesh units off and temporarily turning the 2.4GHz wifi on the router to allow me to set them up be enough? Will I then be able to return to my usual setup and everything will work as it should?
Many thanks in advance
ChatGPT samples:
Me:
Tell me about an iot program called openLuup.
It:
OpenLuup is an open source home automation system that is built on the VeraLuup platform. It is designed to be easy to install and configure, and provides users with a powerful and versatile way to control their home automation devices. OpenLuup offers a wide range of features, including support for many popular home automation devices, scheduling, scripting, and integration with other services. OpenLuup is designed to be customizable, allowing users to create their own home automation systems. It is an excellent choice for those looking to create their own home automation system without spending a lot of money.
Me:
Write an iot program using openLuup.
It:
--openLuup IoT Program-- -- Initialize Variables -- local device_id = "MyHomeDevice" local temperature_sensor_id = "MyTemperatureSensor" local temperature_threshold = 75 -- Create Devices -- luup.create_device("OpenLuup Temperature Sensor", 0, device_id, "D_GenericSensor1.xml", "I_GenericSensor1.xml", "S_TemperatureSensor1.xml", "") luup.variable_set("urn:upnp-org:serviceId:TemperatureSensor1", "CurrentTemperature", 0, device_id) -- Start Timer -- luup.call_delay("check_temperature", 10, "", false) --Function to Check Temperature-- function check_temperature() local current_temperature = luup.variable_get(temperature_sensor_id, "CurrentTemperature", 0) --Check Temperature Threshold-- if current_temperature >= temperature_threshold then --Send Alert-- luup.call_action("urn:micasaverde-com:serviceId:HomeAutomationGateway1", "SendTextMessage", {PhoneNumber="1234567890", Message="ALERT! Temperature exceeded threshold!"}, 0) end --Reset Timer-- luup.call_delay("check_temperature", 10, "", false) endMe:
Write an iot program using openLuup.
It:
Write an iot program using openLuup. -- openLuup IOT Program -- -- Variables local lampState = false local lampTime = 0 -- Functions function lampTimer() if lampTime > 0 then lampTime = lampTime - 1 if lampTime == 0 then luup.variable_set('urn:upnp-org:serviceId:SwitchPower1', 'Status', 0, lampDeviceID) lampState = false end end end -- Setup luup.call_delay('lampTimer', 60, 0) -- Main Loop while true do -- Check for motion if luup.variable_get('urn:micasaverde-com:serviceId:MotionSensor1', 'Tripped', motionSensorDeviceID) == '1' then if not lampState then luup.variable_set('urn:upnp-org:serviceId:SwitchPower1', 'Status', 1, lampDeviceID) lampState = true -- Set lamp timer to 5 minutes lampTime = 300 end end luup.sleep(1) endWhat??
luup.sleep(1)Not good - looks like I still have some semblance of a job to fulfill.
Me:
An iot program called openLuup was written by akbooer. Who is akbooer?
It: (note: answer redacted and as I understand it, also incorrect re: AltUI):
akbooer is the pseudonym of the software developer and home automation enthusiast. He is the creator of the openLuup home automation software, which is an open-source version of the Vera home automation system. He is also the creator of the AltUI graphical user interface for openLuup.
Me:
Who created of the AltUI graphical user interface for openLuup.
and
Me:
Who created of the AltUI graphical user interface for the home automation system Vera.
Names two different people - mmmm.
Regardless very impressive - give it a few more years.
...which I'd like to do. I know I go about these things all wrong (namely think of something I'd like to do, then try and work out what I need to know) but that's me 🙂
Just looking for some pointers on what I should google for really:
What I'd like is to provide a selection of (basically two word) phases which I can select from randomly (or even pseudo randomly) and pass to Alexa to be spoken. There are 10 such phrases only.
So what should I be reading up on to get me started?
TIA for any guidance
C
Building a New Z Wave Network
-
Hello all, I am finally ditching my Vera and moving to HA using a Zooz ZST10 Z wave stick. I have around 50 Z wave devices with a good mix of battery devices, locks, sensors and switches. The plan is to include all the AC powered devices first, starting from the ones closest to my Z wave stick then moving outwards. Once that is complete I will go back and include all battery powered devices in the same fashion.
My question is there any quick way to exclude all my Z wave devices from Vera, or should I just delete all devices without excluding them and factory reset each device before pairing to HA?
-
Factory reset is faster (you’ll not need to wait for a luup restart for every device that’s removed), but there’s a link somewhere with a post by @rafale77 with instructions on how to clone Vera’s Zwave devices on an external key. ZwaveJS has the ability to specify a key and this route is maybe faster than re-pair everything.
-
@therealdb said in Building a New Z Wave Network:
Factory reset is faster (you’ll not need to wait for a luup restart for every device that’s removed), but there’s a link somewhere with a post by @rafale77 with instructions on how to clone Vera’s Zwave devices on an external key. ZwaveJS has the ability to specify a key and this route is maybe faster than re-pair everything.
I'm aiming to migrate from Vera to Hubitat some day, but guess there's no cloning option - you'll have to factory reset (or re-pair) every single device?
-
@tunnus here’s the link to Rafael write up on some options.
@therealdb I was contemplating migrating using one of the mentioned options in the GitHub but ultimately decided to unpair each device and re add it, wanted a fresh start. Everything’s gone pretty well, got about 80% of my devices on HA. Some pesky Zooz ZEN22 switches left that refuse to include in the new network.
-
Not to get off topic, but what are the reasons you are switching from Vera to either Hubitat or HA? More specifically, why did you choose one over another platform? I'm contemplating a switch now, having used Vera since 2016. Vera isn't really being maintained much anymore, and I'm tired of the lack of native device integration and cloud issues. They're putting all their effort into Ezlo, but I just don't know if Ezlo will be more of the same, and I might be better off with something completely different.
-
@tamorgen I can only speak for my self, why I ditched Vera and turned to Home Assistent. Main reason was that almost every smart product can be integrated and is also easier to configure. HA is local, faster and can run on many hardwares. The UI aka love lace view, is fully configurable. The development is impressive and the forum is thriving compared to Vera/Ezlo. The users don't get banned for 150 years as well...
I started HA with my Veras still going side by side for almost a year. Slowly I transfered device by device until everything more or less had found it's way to HA. I still have a a handful of devices, all Philio PST02-A (a multisensor) - because they don't work that well in HA, at least when I tried last year. After the transfer to HA I'll never look back to Vera or Ezlo. -
@fanan said in Building a New Z Wave Network:
@tamorgen I can only speak for my self, why I ditched Vera and turned to Home Assistent. Main reason was that almost every smart product can be integrated and is also easier to configure. HA is local, faster and can run on many hardwares. The UI aka love lace view, is fully configurable. The development is impressive and the forum is thriving compared to Vera/Ezlo. The users don't get banned for 150 years as well...
I started HA with my Veras still going side by side for almost a year. Slowly I transfered device by device until everything more or less had found it's way to HA. I still have a a handful of devices, all Philio PST02-A (a multisensor) - because they don't work that well in HA, at least when I tried last year. After the transfer to HA I'll never look back to Vera or Ezlo.HA definitely looks like an option. My main concerns are:
- Envisalink/DSC integration (working)
- Geofencing/Presence detection (many options)
- Nest thermostat and Nest Protect integration (looks like they have it working)
I've looked at Hubitat as well, but what's always held me back is the Envisalink integration. The developer who had integrated it left in 2019, and it looks like it's been flailing ever since. Also, I'm not sure about Nest integration.
I may just take the HA plunge soon.
Thanks much for your feedback.
-
@tamorgen well the reason why I switched was actually mainly for a better z wave network. My Vera’s network was losing devices daily and was slow. All the integrations I wanted were already supported through Vera.
HA allowed me to have way better control over z wave and also allowed me to use whatever dongle I wanted. Plus it has way way wayyyyy more integrations, I was able to automate soo many other devices that I wasn’t able to do before.
Also I have been using the Envisalink integration and it’s been working fairly well on HA.
-
@pabla said in Building a New Z Wave Network:
@tamorgen well the reason why I switched was actually mainly for a better z wave network. My Vera’s network was losing devices daily and was slow. All the integrations I wanted were already supported through Vera.
HA allowed me to have way better control over z wave and also allowed me to use whatever dongle I wanted. Plus it has way way wayyyyy more integrations, I was able to automate soo many other devices that I wasn’t able to do before.
Also I have been using the Envisalink integration and it’s been working fairly well on HA.
Yeah, I get that. I've been having Vera loosing devices on me. I've actually got a troubleshooting call scheduled for this evening with them for one of my battery powered devices. It drives me insane.
You mentioned being able to use any Z-wave stick. I'm not really clear how that works with HA.
Are you running that on the same device that runs HA, or do have to run them on separate devices? I have plenty of overhead available on my home server where I could run HA, but I can't exactly walk around with my server and the dongle plugged in to pair my devices. At least with Vera, I could unplug it and move it close to the device I want to pair.
They make it sound as if a Pi 4 really isn't powerful enough.
-
@fanan said in Building a New Z Wave Network:
I still have a a handful of devices, all Philio PST02-A (a multisensor) - because they don't work that well in HA
Still using MSR? I'd be happy to look at the Hass device in detail to see if we can do a per-devce exception to work around whatever issues you have. If it's an issue with Hass' integration, which happens sometimes, you can use MSR's ZWaveJSController to get even better access to devices that HA dumbs down too much or doesn't get right (Hass itself uses ZWave-JS, so you likely already have half of what you need running for MSR).
-
@tamorgen you just basically plug the Z wave stick into your machines USB port. I only ever had to move my HA host once for pairing Z wave devices. Depending on the size of your home and the type of devices you’re pairing you may not need to move host around.
-
@toggledbits said in Building a New Z Wave Network:
Still using MSR? I'd be happy to look at the Hass device in detail to see if we can do a per-devce exception to work around whatever issues you have. If it's an issue with Hass' integration, which happens sometimes, you can use MSR's ZWaveJSController to get even better access to devices that HA dumbs down too much or doesn't get right (Hass itself uses ZWave-JS, so you likely already have half of what you need running for MSR).
Yes - I'm still using MSR! I should try to add the multisensor once more to HA and see how it works. Last time everything seemed alright, but it none of it's entitys changed state. I read on the HA users forum that there could be a workaround if some parameters were changed - but that didn't work in most cases - and not for me. When I've done the transfer, and if the problem persists, I'll start a new thread/topic. Thanks for your sincere kindness!
/Fanan