For being a "Developer preview" it is quite solid. After some minor issues yesterday and have been solved with 21051, I have re-built most of my Reactor-sensors in Vera in the MSR and it is working fine. They are now disabled in the Vera and let's see how it goes in the coming days 
M
Matohl
@Matohl
I don't know if you guys are into dashboards, but I am.
For a second home I tried the Shelly Wall Display 2, and while not so big, it worked well over the summer.
Since we're remodeling our house, I just swapped my old Fire Tablet (with its own problems) with two new Shelly Wall Display XL. I just removed the standard firmware, and I added mine (https://github.com/dbochicchio/ShellyElevate), forked from https://github.com/RapierXbox/ShellyElevate
I just managed to support buttons (this thing has 4 of them) and it's all auto-discovered by Home Assistant and accessible via Reactor.
I also have a new build in the works with support for buttons inside HA.
I added a bonus Javascript interface sending events (screen/screensaver status, buttons, motion) to automatically drive the dashboard (all doing in HTML+Javascript and monitoring Reactor's variable).
This specifical thing excluded, go get one of them, the device has a decent CPU for HA dashboards and blends wonderfully in the decor.
Hello all.. been a minute! I recently rebuilt my Z wave network and migrated to a new z wave stick. In order to prevent any downtime I kept my original z wave network up and ran a docker version of Z Wave JS UI with my new controller. This way I could add device by device without having any devices down.
I finally moved all the devices over to my new stick today. The final step was to migrate everything from my Docker instance of Z Wave JS UI to the HA add-on of Z Wave JS UI. However during this migration some of the names didn't populate correctly which I later managed to import back into Z Wave JS UI. The issue was in Reactor it is stuck on the default names and the entities are not updating. I removed the controller from Reactor, restarted, hard refreshed, and added the controller back however the new entity names have not updated. Also it seems like the old entities from my previous instance of Z Wave JS UI are lingering and not being marked as dead (I believe a certain amount of time needs to lapse before they're marked as dead in Reactor).
My goal is to basically purge all the entities for the 'ZWaveJS' controller in Reactor so it can pull all the updated entity names and only the entities that exist in Z Wave JS UI. I cannot find a quick way to do this, I know entities can be deleted one by one, but with over 100 entities this would take long
I am guessing that if I added the controller with a new name in in the Reactor config it would pull the updated entities and names but I think that would break my rules since the entity IDs would change (I made sure to name all the entities the exact same as they were previously to prevent this issue).
I'm slowly migrating all my stuff to MQTT under MSR, so I have a central place to integrate everything (and, in a not-so-distant future, to remove virtual devices from my Vera and leave it running zwave only).
Anyway, here's my reactor-mqtt-contrib package:
https://github.com/dbochicchio/reactor-mqtt-contrib
Simply download yaml files (everything or just the ones you need) and you're good to go.
I have mapped my most useful devices, but I'll add others soon. Feel free to ask for specific templates, since I've worked a lot in the last weeks to understand and operate them.
The templates are supporting both init and query, so you have always up-to-date devices at startup, and the ability to poll them. Online status is supported as well, so you can get disconnected devices with a simple expression.
Many-many thanks to @toggledbits for its dedication, support, and patience with me and my requests
I don't know if I'm the only one, but managing more than one Reactor installs, the need to have some sort of copy&paste for rules has grown on me.
While I understand the technical challenges, I'm wondering if a "god mode" where I could copy the raw JSON rule and paste it into another rule could be an advanced, flag only feature that could benefit power users.
I know I can copy the JSON file and proceed, but I must stop Reactor and when doing maintenance, it's more clicks to do.
Just an idea
I’ve added a couple of Shelly Wave i4 as scene controllers and I’m planning to add more, since I can just use standard buttons instead of battery-powered scene controllers, which also looks better aesthetically.
That said, I’m struggling to figure out how to write a simple rule that cycles between states every time I press a button.
Example: Light 1 ON → OFF, then Light 2 ON → OFF.
The part I can’t get right is handling the case where Light 1 or Light 2 might already be ON independently of the rule.
Maybe it’s just too much sun and relaxation clouding my brain, but any hint would be appreciated.
Use case:
When performing home maintenance, such as air conditioning, I want all rules involving air conditioning to be disabled.
To do this, to day, I have a virtual switch that I placed within all rules involving air conditioning, meaning that if I turn it off, none of them work.
Then another situation: the water pump system and garden irrigation, another switch.
In short, I had to create several virtual switches in Hubitat to disable rules in MSR.
Unfortunately, however, I was unable to cover all scenarios, so I wondered if it would be possible for MSR to support a virtual MSR switch, which, when configured in the reactor settings, would function as a general on/off switch for MSR.
If it is configured and turned off, the entire rules and actions in MSR stops working, except for the status change reading process, specifically for this switch, which, when turned on, would restart the MSR.
Would it be possible to do something like this? Any recommendations from the experts?
Probably a really dumb question.
Currently I am using the owntracks_sensor for tracking phones being in region in MSR and it works great.
Digging around with Home Assistant and toying with some dashboards, is there any way of exposing that sensor to HA trivially? I could set MSR to trip a virtual switch in OpenLuup which can then be exposed to HA (with all my other Vera devices) but that feels a bit in-elegant if I can do it directly.
Any thoughts?
Apologies if the ask is not clear/
TIA
C
...is back....
https://arstechnica.com/google/2025/08/researchers-use-calendar-events-to-hack-gemini-control-smart-home-gadgets/?utm_source=facebook&utm_medium=social&utm_campaign=dhfacebook&utm_content=null&fbclid=IwY2xjawMBq-pleHRuA2FlbQIxMQABHlSqIalzbz1IxcJFzlw8GBE6nC3FwvxcHgR370nJhogU6JjqbmRxG-lysqgh_aem_lx9XboYFKw9tpHnedGQKUA
C
As there are statements about compatibility for home assistant versions in MSR new version announcements (e.g. "HassController: Bless Hass to 2025.7.3"), I thought it would be good idea to track other controllers as well.
As an example, I can confirm that build "latest-25208-c53e8513" works with Hubitat Elevation C-8 platform version 2.4.2.134 using Maker API.
Updates: (the latest versions first in the list)
OK: build "latest-25264-2fbe9217" with Hubitat C-8 platform v. 2.4.3.123
Posts
-
Multi-System Reactor Developer Preview AVAILABLE -
Version 1.0 Pre-release DiscussionVirtual Devices as discussed here:
https://smarthome.community/topic/546/let-s-talk-about-msr-provided-virtual-devices-not -
Status Board - What’s your HA Information Dashboard ?@toggledbits Interesting, when you are ready for Alfa or Beta I am ready to test it out.
-
Twinkly Christmas tree lights with openLuup/VeraYes, they are really cool. I have them as well in my tree and outside on the balcony. I hope you will release your app.
-
Almost there! -
Embedded "in-wall" raspberry screen -
Merry Christmas/Happy Holidays -
Multi-System Reactor Developer Preview AVAILABLE -
Setting RGB colour values -
Multi-System Reactor Developer Preview AVAILABLE@rafale77 said in Multi-System Reactor Developer Preview AVAILABLE:
"The rPi4 is a bit tricky to boot from SATA but it can be done and if you want a reliable system, you should definitely go down that route."
Today with an upgraded system, since the RPi firmware has native support, it is fairly straight forward. There are tons of guides and videos online to help.
-
MSR Backup -
How do I "else"@librasun I have actually moved most of my Reactor rules (3/4) by making new ones MSR were I could iron out some of the conceptual mistakes I made when I stated to use Reactor in Vera. MSR is rather stable now but I understand that you want to wait for how to import. My next step is to integrate it with InfluxdB.
-
How do I "else"I want my sensors to be stored in a database for further analysis/joy (Temp, Watts what ever). I guess you are right that it could be done with some additional functionality in MSR but I think @toggledbits bits in some post that it is not in the roadmap. Thinking ...
-
How do I "else" -
System integration roadmap@librasun said in System integration roadmap:
Periodically send Patrick some beer money! ◄– as should everyone who respects his time and energy
Done
-
How to auto start on Rpi reboot ?With the newer firmwares to the RPi it is fairly straight forward to use a SSD since it has native support now. Not that much alchemy anymore.
-
MSR Backup@librasun Same here, I have now transferred all my old Reactor routines from Vera and it is looking good. The old ones in Vera are now disabled and they are actually running on my RPi4 as the production unit for my home, although @toggledbits sais you should not :). Forward to the HA integration
-
Can MSR be connected to more than one Vera controller?@librasun I hope that this will not be high on the priority list, since it is a paid cloud service. We need to get our local services MSR and HASS etc. working as intended. There are still some basic functionalities to iron out. I have started to realize in my Vera-MSR-HASS home it is starting to get quite complicated to know how I should use it in the most effective way since entities and rules now are starting to get spread out.
-
Feature Request: MSR Rule Snapshot Exporter