Skip to content
  • Categories
  • Recent
  • Tags
  • Popular
  • Unsolved
Collapse
Discussion Forum to share and further the development of home control and automation, independent of platforms.
  1. Home
  2. Software
  3. Multi-System Reactor
  4. Constraints (no data) rule actions have never run
UI not loading after upgrading to 26318
tunnusT
Sorry for a hasty post, will update some details later, but the scenario is that I managed to type a wrong password for too many times and had the following users.yaml section: authtrack: max_attempts: 4 within_minutes: 180 # 180 minutes = 3 hrs block_expiration_minutes: 10080 # 7 days At this time I used build 26298. Then noticed there's a new build with a bypass blocking feature (and yes, it said it won't remove existing block). Anyway, went ahead and upgraded to 26318, but the problem now is that UI is not loading at all (page does not answer). This also means that I cannot use "http://reactor_host:port/diag/clear_authtrack?askauth" command to clear the block (or use any other source IP for login). Docker container stays up & running and does not exit. I'll try to dig up some logs, but anything that I could immediately try out (could I delete a particular file for example)? EDIT: some logs [latest-26318]2026-11-17T20:42:32.337Z <Rule:INFO> MSR startup (rule-lculfnhm in Miscellaneous) started [latest-26318]2026-11-17T20:42:32.343Z <httpapi:NOTICE> httpapi#1 HTTP server listening on :::8111 [latest-26318]2026-11-17T20:42:32.347Z <httpapi:INFO> httpapi#1 local docs found in /opt/reactor/docs/html; setting up static service [latest-26318]2026-11-17T20:42:32.354Z <app:NOTICE> Starting WSAPI... [latest-26318]2026-11-17T20:42:32.355Z <wsapi:NOTICE> wsapi: starting version 26298 protocol [latest-26318]2026-11-17T20:42:32.523Z <Engine:INFO> Engine#1 master timer tick, local time "17/11/2026 22:42:32" (TZ offset 120 mins from UTC) [latest-26318]2026-11-17T20:42:32.542Z <Engine:NOTICE> Starting reaction MSR startup<SET> (rule-lculfnhm:S) [latest-26318]2026-11-17T20:42:32.545Z <Notifier:null> Module Notifier v26186 [latest-26318]2026-11-17T20:42:32.545Z <Engine:INFO> MSR startup<SET> all actions completed. [latest-26318]2026-11-17T20:42:32.557Z <Rule:INFO> Rule#rule-lculfnhm reaction rule-lculfnhm:S completed [latest-26318]2026-11-17T20:42:32.558Z <default:null> Module NotifyTelegram v26177
Multi-System Reactor
[Resolved] Hubitat upgrade 2.5.3.123 may have broken login
3
Topic thumbnail image
Multi-System Reactor
Reactor (Multi-System/Multi-Hub) Announcements
toggledbitsT
Build 21228 has been released. Docker images available from DockerHub as usual, and bare-metal packages here. Home Assistant up to version 2021.8.6 supported; the online version of the manual will now state the current supported versions; Fix an error in OWMWeatherController that could cause it to stop updating; Unify the approach to entity filtering on all hub interface classes (controllers); this works for device entities only; it may be extended to other entities later; Improve error detail in messages for EzloController during auth phase; Add isRuleSet() and isRuleEnabled() functions to expressions extensions; Implement set action for lock and passage capabilities (makes them more easily scriptable in some cases); Fix a place in the UI where 24-hour time was not being displayed.
Multi-System Reactor
Reactor Inspect - a small read-only helper panel for MSR
wmarcolinW
Topic thumbnail image
Multi-System Reactor
Reverse proxy & API ACL
tunnusT
I'm trying to allow anonymous access from a local network to /api/v1/log, but the problem now with the reverse proxy configuration is that this access is open via proxy to the internet. At least I wasn't able to configure ACL so that only an access from a local network would be permitted. reactor.yaml: baseurl: "http://192.168.1.12:8111" proxy_baseurl: "https://external.com:30000" trusted_proxy: "192.168.1.12" Local traffic would originate from 192.168.1.0/24 network. Synology is acting as a reverse proxy and hosting MSR as a docker container (which has its own network and IP 172.18.0.5). MSR build is latest-26298-fbb75fb8 users.yaml: - url: "/api/v1/log" method: "GET" source_ip: 172.18.0.0/24 allow: true Using the above ACL works, but it enables access via proxy also. If I use source_ip: 192.168.1.0/24, then it doesn't work either locally or remotely. So I'm kinda lost what should I use as source_ip in this case?
Multi-System Reactor
MFA
T
Topic thumbnail image
Multi-System Reactor
Grouped devices
G
I've seen many of you using Dynamic Group Controller. I'm using it myself for monitoring device battery levels. I've read and re-read the Dynamic Group Controller docs and still cannot come to an answer for my question so let me paint my scenario: I've migrated from EchoSpeaks in Hubitat ('cause borked and seemingly unmaintained) to Alexa Devices in Home Assistant ('cause not borked in 2026.11.0) to be able to send TTS to my Echo devices. In EchoSpeaks I could create groups. Sweet. In Alexa Devices I don't seem to be able to do so. As such, my thought was "wait - isn't there a way in MSR?" Is this an effective scenario that Dynamic Group Controller can be used for?
Multi-System Reactor
Login protections
tunnusT
Topic thumbnail image
Multi-System Reactor
Reactor Build 26284 stuck at Loading Reactor UI
T
Topic thumbnail image
Multi-System Reactor
MSR with reverse proxy
tunnusT
I'm trying to use MSR via reserve proxy in Synology DSM, but MSR page does not load https://<public ip>:30000/reactor/en-US/ At the same time logging page loads normally https://<public ip>:30000/api/v1/log I thought maybe authentication was messing it up, but there was no deny entries in the log, and also disabling authentication did not make any difference. For this use case VPN is not an option (that works, but as said not an option for this particular use case). Any ideas what could cause this? MSR build latest-26242-28d69aa8, Chrome browser
Multi-System Reactor
Missing attribute after upgrade
3
Topic thumbnail image
Multi-System Reactor
[MSR] Native fan capabilty
therealdbT
Nothing more to add. I see we have hvac_blower, but, anyway, maybe a native fan on the same assumptions of the fan from HASS could be reasonable. I have a couple of them. ie, this is from ESPHome via HASS. x_hass.domain="fan" x_hass.entity_id="fan.kitchen_seashell_hood_ventilation_fan" x_hass.floor_id=null x_hass.services=["fan","esphome"] x_hass.source="esphome" x_hass.state="off" x_hass_attr.friendly_name="Seashell Hood Ventilation Fan" x_hass_attr.percentage=50 x_hass_attr.percentage_step=25 x_hass_attr.preset_mode="" x_hass_attr.preset_modes=[] x_hass_attr.supported_features=49 Thanks.
Multi-System Reactor
[MSR] Rule do not fire
therealdbT
Topic thumbnail image
Multi-System Reactor
Rule condition shows TRUE in UI but Rule never transitions to SET — survives full restart
N
Build: latest-26221-b25bb3e3, Docker on Synology. Hi, I have a Rule whose Trigger/Constraints reference other Rules via Rule State ... is TRUE. At some point it stops firing. Expanding the rule's condition tree in the UI shows every Trigger and Constraint condition green/TRUE — confirmed live by walking into the room and watching Motion go true in real time. Rule History shows no new SET, just old reset entries. Tried, on the same rule, same evening: recreating the trigger conditions with fresh IDs, recreating the constraint conditions with fresh IDs (flat and wrapped in a new Group — wrapping in a Group produced one SET, but it didn't reproduce on repeat attempts with the same structure), and finally a full container restart with a verified-correct saved rule. Still no SET, even with a fresh live motion event right after the restart. Separately, I found that this rule (and its 10 per-room clones) share identical internal condition/group IDs with each other — leftover from a batch clone done months ago, never regenerated. Not sure if that's related, since fixing the IDs didn't reliably fix the symptom either. Has anyone seen a Rule State condition show TRUE in the UI without the Rule ever producing a SET, surviving a clean restart? Thanks in advance
Multi-System Reactor
DynamicGroupController and attributes
therealdbT
Hey @toggledbits I'm back to trying to optimize a couple of things based on dynamic group. First of all, I think I found a typo in the doc: primary_attribute: "binary_sensor.state" primary_attribute_value: | d = false; each id in members: d = getEntity(id)?.attributes?.power_switch?.state or d, d I think the correct code snippet is d = false, All that said, my use case for dynamic groups is to group 3 different climate devices, so I could easily command them at the same time. Commands are good, but sometimes I want to check if any of the devices are on, and that's easily done with a similar snippet as the one you have in the docs. But this is limited to the primary attribute, while I want to have any of the attributes in the group to be driven by a similar logic (while all are null in the group). ie, access hvac_control.mode and see if any of the unit is set to cool, or heat. Is that possible, without re-defining an expression in each of my rules? Thanks!
Multi-System Reactor
Unofficial thread for compatibility
tunnusT
As there are statements about compatibility for home assistant versions in MSR new version announcements (e.g. "HassController: Bless Hass to 2025.7.3"), I thought it would be good idea to track other controllers as well. As an example, I can confirm that build "latest-25208-c53e8513" works with Hubitat Elevation C-8 platform version 2.4.2.134 using Maker API. Updates: (the latest versions first in the list) OK: build "latest-25264-2fbe9217" with Hubitat C-8 platform v. 2.4.3.123
Multi-System Reactor
Ooops - Deleted Reactor Ex Machina II
R
I accidentally deleted Reactor Ex Machina II (REM II) from my Reactor rules. I tried to recover it by deleting the .json and .dval in the Rules subdirectory and then recreating it from Togglebits original posting, but that did not work. Does anyone know how to recover REM ll ?
Multi-System Reactor
Bail out of failed reaction?
T
Topic thumbnail image
Multi-System Reactor
Arming Envisalink panel from MSR
T
Topic thumbnail image
Multi-System Reactor
[Solved] DynamicGroupController updating members issue
CrilleC
Edit: Solved in latest-26221. Bare-metal latest-26193 I have this group: "OKforLarm": name: OK för Larm select: - include_controller: vera - include_capability: door_sensor filter_expression: entity.attributes.door_sensor.state It contains the entities I expect but behaves a bit odd. When I open vera>device_10097 the entity attribute door_sensor.state changes to true but it won't show up as member in the group, when I also open vera>device_10095 they both shows as members and when I close vera>device_10095 it disappear from the group but when I close vera>device_10097 it lingers in the group until I restart Reactor.
Multi-System Reactor

Constraints (no data) rule actions have never run

Scheduled Pinned Locked Moved Multi-System Reactor
26 Posts 3 Posters 10.2k Views 3 Watching
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • cw-kidC Offline
    cw-kidC Offline
    cw-kid
    wrote on last edited by
    #10

    24:04 am here now, the lights scheduled to turn off at 23:55pm haven't turned off again.

    Here is a screen shot of the rules summary card.

    43baaa24-620c-4cf0-9c91-418751cb39b4-image.png

    I don't know why they aren't turning off ?

    Thanks

    1 Reply Last reply
    0
    • toggledbitsT Online
      toggledbitsT Online
      toggledbits
      wrote on last edited by
      #11

      Are you in 21056?

      Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

      cw-kidC 1 Reply Last reply
      0
      • toggledbitsT toggledbits

        Are you in 21056?

        cw-kidC Offline
        cw-kidC Offline
        cw-kid
        wrote on last edited by cw-kid
        #12

        @toggledbits Yes

        Two more rules here both are set to run at 9am

        One worked this morning OK and did its action, the other rule the bottom one in the screen shot, that didn't run its action.

        dcb755c3-b7c9-4737-8dc3-7b798af4c62d-image.png

        This is the rule that didn't run, have I done something wrong ?

        26278666-67b1-475e-bf6e-2e46f95edef4-image.png

        0817dc27-007c-4f90-a3bc-0ff333f262cb-image.png

        I've just updated to the latest version of MSR (reactor-0.1.21057-f143fd3-generic.tar) and now that rule that didn't run this morning looks like this:

        b34780c4-058e-4b13-b40a-8d3dd2ea3e56-image.png

        1 Reply Last reply
        0
        • MatohlM Offline
          MatohlM Offline
          Matohl
          wrote on last edited by
          #13

          So it worked after the update?

          cw-kidC 1 Reply Last reply
          0
          • MatohlM Matohl

            So it worked after the update?

            cw-kidC Offline
            cw-kidC Offline
            cw-kid
            wrote on last edited by
            #14

            @matohl I've no idea what's going on.

            That rule that didn't run when it should of at 9am has now ran its action at 10.04am after I updated and restarted MSR etc, as it sent a notification to my phone in Telegram

            1 Reply Last reply
            0
            • MatohlM Offline
              MatohlM Offline
              Matohl
              wrote on last edited by
              #15

              Yes, it went true when you restarted (it's still after 09.00). Why it didn't run at 09.00 I can not tell, I have similar triggers that's works fine

              1 Reply Last reply
              0
              • cw-kidC Offline
                cw-kidC Offline
                cw-kid
                wrote on last edited by
                #16

                I have created a lot of other rules, some of them also with Constraints and none of those rules say null or no data in the Constraints in the rules summary card.

                I've gone through them all now again looking and it seems I only have two rules which I have highlighted above that don't run and they say or have said null or no data in Constraints.

                All my other garden lights have turned on and off OK, but they are using a sunset offset not a specific set time.

                But that rule to turn off the Festoon lights at 23:55pm has never run since I created it.

                I also have rules for the window coverings setup for specific times in the morning and generally they have all run at their set times OK.

                I will see what happens tomorrow at 9am with this "Lounge Blind Slats" one ?

                Thanks

                1 Reply Last reply
                0
                • cw-kidC Offline
                  cw-kidC Offline
                  cw-kid
                  wrote on last edited by
                  #17

                  The 11:55pm rule that never worked since I created it, I deleted it. I then created it again exactly the same as I did before. Looking at its Summary card the Constraints stated no data / null etc. I then edited the rule and changed its time to 9:00am and saved. I then edited the rule again and set it back to 11:55pm and saved.

                  The rule now runs and turns off my lights at 11:55pm or it did last night at least anyway. So assume it will work every night now.

                  I created another new rule not related to run every night at 10:30pm and that one worked first time no problems, so not sure why I have had issues with a few rules.

                  The 9am rule to open the Lounge Blind Slats didn't run this morning again, so I've deleted it and recreated it, see what happens with that tomorrow morning ?

                  1 Reply Last reply
                  0
                  • toggledbitsT Online
                    toggledbitsT Online
                    toggledbits
                    wrote on last edited by
                    #18

                    Remember two things:

                    1. Log files are pretty good at telling what's going on, and really good at help me determine what's going on;
                    2. Open PRs are my highest priority.

                    Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                    1 Reply Last reply
                    0
                    • cw-kidC Offline
                      cw-kidC Offline
                      cw-kid
                      wrote on last edited by
                      #19

                      I emailed the logs to you as you asked above.

                      Thanks.

                      1 Reply Last reply
                      0
                      • toggledbitsT Online
                        toggledbitsT Online
                        toggledbits
                        wrote on last edited by
                        #20

                        OK. Not seeing an email yet... you used the address in the "Support" section of the About page?

                        Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                        cw-kidC 1 Reply Last reply
                        0
                        • toggledbitsT toggledbits

                          OK. Not seeing an email yet... you used the address in the "Support" section of the About page?

                          cw-kidC Offline
                          cw-kidC Offline
                          cw-kid
                          wrote on last edited by
                          #21
                          This post is deleted!
                          1 Reply Last reply
                          0
                          • toggledbitsT Online
                            toggledbitsT Online
                            toggledbits
                            wrote on last edited by
                            #22

                            @cw-kid I removed your post just for my own anti-spam/scraping reduction, no other reason. The address you showed is fine. If you know how to reach me in my primary domain, that's fine too. I just point out the About page because it will always be there.

                            Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                            1 Reply Last reply
                            0
                            • cw-kidC Offline
                              cw-kidC Offline
                              cw-kid
                              wrote on last edited by
                              #23

                              No worries.

                              Check your patrick@ primary domain I sent the logs there on the 26th

                              1 Reply Last reply
                              0
                              • toggledbitsT Online
                                toggledbitsT Online
                                toggledbits
                                wrote on last edited by
                                #24

                                Logs from two days ago don't help when (a) you've update the software, (b) the condition that was a problem now isn't, and (c) a condition that wasn't a problem now is. 🙂 Too many changes. Need fresh logs.

                                The log does show that the rule "Heating turn ON Check Opened Windows" needs to be updated to use the hvac capability attribute (which didn't exist when you created the rule apparently, so you're using the device's extended attribute). You just need to go in and fix that rule. I don't have the "Trouble" system working yet, which will pick stuff like that up.

                                Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                                cw-kidC 1 Reply Last reply
                                0
                                • toggledbitsT toggledbits

                                  Logs from two days ago don't help when (a) you've update the software, (b) the condition that was a problem now isn't, and (c) a condition that wasn't a problem now is. 🙂 Too many changes. Need fresh logs.

                                  The log does show that the rule "Heating turn ON Check Opened Windows" needs to be updated to use the hvac capability attribute (which didn't exist when you created the rule apparently, so you're using the device's extended attribute). You just need to go in and fix that rule. I don't have the "Trouble" system working yet, which will pick stuff like that up.

                                  cw-kidC Offline
                                  cw-kidC Offline
                                  cw-kid
                                  wrote on last edited by
                                  #25

                                  @toggledbits Thanks for the heads up. I've changed that rule to use hvac_heating_unit.setpoint instead then.

                                  I'll do some more testing on these two problem rules with set start times. I believe one is working now after I recreated it and the other I need to see if its working now or not ?

                                  Thanks

                                  1 Reply Last reply
                                  0
                                  • toggledbitsT Online
                                    toggledbitsT Online
                                    toggledbits
                                    wrote on last edited by
                                    #26

                                    If it's not working, don't recreate it yet. Save the JSON file with its ID from inside storage/rules and send that to me (you can just post it on a PR--should be small/short). After you've capture it, then you can go ahead and recreate. If there's anything broken in the rule itself, I should be able to see it.

                                    Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                                    1 Reply Last reply
                                    0
                                    • toggledbitsT toggledbits locked this topic on
                                    Reply
                                    • Reply as topic
                                    Log in to reply
                                    • Oldest to Newest
                                    • Newest to Oldest
                                    • Most Votes


                                    Recent Topics

                                    • UI not loading after upgrading to 26318
                                      toggledbitsT
                                      toggledbits
                                      0
                                      6
                                      124

                                    • [Resolved] Hubitat upgrade 2.5.3.123 may have broken login
                                      toggledbitsT
                                      toggledbits
                                      0
                                      8
                                      293

                                    • Reactor (Multi-System/Multi-Hub) Announcements
                                      toggledbitsT
                                      toggledbits
                                      5
                                      153
                                      163.4k

                                    • Reactor Inspect - a small read-only helper panel for MSR
                                      G
                                      gwp1
                                      2
                                      8
                                      616

                                    • Reverse proxy & API ACL
                                      tunnusT
                                      tunnus
                                      0
                                      9
                                      526

                                    • MFA
                                      T
                                      tamorgen
                                      0
                                      28
                                      1.5k

                                    • Grouped devices
                                      G
                                      gwp1
                                      0
                                      3
                                      200

                                    • Login protections
                                      toggledbitsT
                                      toggledbits
                                      0
                                      2
                                      239

                                    • Reactor Build 26284 stuck at Loading Reactor UI
                                      T
                                      tamorgen
                                      0
                                      16
                                      1.8k

                                    • MSR with reverse proxy
                                      tunnusT
                                      tunnus
                                      0
                                      12
                                      909

                                    • Missing attribute after upgrade
                                      3
                                      3rdStng
                                      0
                                      3
                                      695

                                    • Use of Google Gemini as an MSR and Hubitat configuration aid
                                      therealdbT
                                      therealdb
                                      0
                                      2
                                      333
                                    Powered by NodeBB | Contributors
                                    Hosted freely by 10RUPTiV - Solutions Technologiques | Contact us
                                    • Login

                                    • Don't have an account? Register

                                    • Login or register to search.
                                    • First post
                                      Last post
                                    0
                                    • Categories
                                    • Recent
                                    • Tags
                                    • Popular
                                    • Unsolved