Skip to content
  • Categories
  • Recent
  • Tags
  • Popular
  • Unsolved
Collapse
Discussion Forum to share and further the development of home control and automation, independent of platforms.
  1. Home
  2. Software
  3. Multi-System Reactor
  4. Updated to latest MSR 21243 and no entities are being executed I Hubitat
Copying a global reaction
tunnusT
With build 25328, if you copy a global reaction, a new reaction does not appear in the UI unless you do a refresh. I recall this used to work without needing this page refresh? Anyway, only a minor nuisance.
Multi-System Reactor
[Reactor] Bug when sending MQTT boolean payloads
therealdbT
Topic thumbnail image
Multi-System Reactor
Difficulty defining repeating annual period
R
I have tried numerous ways to define a recurring annual period, for example from December 15 to January 15. No matter which method I try - after and before, between, after and/not after, Reactor reports "waiting for invalid date, invalid date. Some constructs also seem to cause Reactor to hang, timeout and restart. For example "before January 15 is evaluated as true, but reports "waiting for invalid date, invalid date". Does anyone have a tried and true method to define a recurring annual period? I think the "between" that I used successfully in the past may have broken with one of the updates.
Multi-System Reactor
Need help with sequence
T
Good evening all, For about the past week or so, I've been having problems with a specific rule in my home automation that controls when my home goes from an Away mode to Home mode. One of the conditions it checked for was my alarm panel, when it changed from Armed Away to Disarmed. There seems to have been a firmware update on the panel that added an intermittent step of "pending", and I can't say for certain it happens 100% of the time. Is there a way to write a condition that so it changes from one condition, to the next, and then another condition? As in, Home alarm changes from armed_away to pending to disarmed. Thanks.
Multi-System Reactor
Possible feature request?
CatmanV2C
No idea how easy this would be. During my migration away from Z-wave I've been replacing the Z-wave devices with Sonoff which has broken some of my automations. Any chance of a 'Test Reaction' function to call out which ones are broken because an entity no longer exists? Without actually running the reaction? Or does this exist already and I'm just not aware of how to do it? Obviously I can see entities that are no longer available, but not quite what I'm looking for. I guess it's something of an edge case so no huge issue. TIA! C
Multi-System Reactor
Logic Assistance: Exterior Lights on when Illuminance Below Threshold
PablaP
Topic thumbnail image
Multi-System Reactor
Time series documentation
tunnusT
Is the current manual (incl. examples) up to date with how retention value is handled in time series configuration? Referring to this post
Multi-System Reactor
MQTT templates for ZIgbee scene controller, or a better way?
CatmanV2C
Topic thumbnail image
Multi-System Reactor
Reset a delay
CatmanV2C
I'm sure this has been asked, and answered, but damned if I can figure it out Use case: I have a rear garden with lights. A door from the kitchen into the garden and a door from the garage. Currently if I open the kitchen door the lights come on (yay) and a 3 minute delay starts. After 3 minutes, no matter what else happens, the lights go off (Boo! But also yay!) What I would like is for the 3 minute delay until the lights go off to start from the latest door open event. That is, if I'm going from kitchen to garage, and back again, the lights stay on until there's three minutes of no activity. I've tried 'hacking' with a virtual switch, but can't seem to stop the delay. Any pointers? TIA C
Multi-System Reactor
Reactor Loading Screen Safari
S
Topic thumbnail image
Multi-System Reactor
Constraints states visually do not match actual
S
Topic thumbnail image
Multi-System Reactor
[MSR] Feature request: For Each action on arrays/groups
therealdbT
Topic thumbnail image
Multi-System Reactor
[Solved] Error: Command timeout
G
at _ClientAPI._commandTimeout (http://192.168.1.100:8111/client/ClientAPI.js:807:179 Seeing this randomly when returning to open browser tab after being away awhile. Once, maybe twice a day. "What did you do to trigger it?" Literally nothing, just walked away and returned and there it was. Actions taken in reasonably close proximity to this particular instance of it popping up: I'd restarted the MSR container in Portainer. I'll try to grab some logs here shortly.
Multi-System Reactor
Issue with MSR UI becoming unresponsive
S
I'm having an issue with MSR's UI being very unresponsive. It started happening a couple days ago and I didn't make any changes that would have caused this except adding some meross lan devices in HA. When I go into an entity action and use the search functionality, it usually will start filtering and then get to a place after a few letters are entered where it will take 30 seconds or more (sometimes minutes) for the UI to show what I am typing. During this time MSR ui is completely unresponsive. I've tried multiple browsers and multiple computers. HA and MSR are both deployed in docker. I have run HTOP on the host and when the problem happens there are no CPU/Memory spikes at all. From a functionality standpoint MSR is working perfectly. This seems to be an UI issue only. Do i need to ditch Docker and run MSR on a Proxmox VM? I have both stand alone Docker and Proxmox environments. I dont mind doing that I just want to be able to use the UI again... Installation method Home Assistant Container Core 2025.7.3 Frontend 20250702.3 nothing crazy in the logs except some openweather map stuff that doesn't make any sense as it is working fine in MSR Any help would be greatly appreciated Reactor latest-25328-b2ed1365 app 25328 configuration from /var/reactor/config NODE_PATH /opt/reactor:/opt/reactor/node_modules [latest-25328]2025-11-30T20:01:53.843Z <app:null> Reactor build latest-25328-b2ed1365 starting on v24.11.1 /usr/local/bin/node [latest-25328]2025-11-30T20:01:53.844Z <app:null> Process ID 1 user/group 0/0; docker; platform linux/x64 #161-Ubuntu SMP Tue Jul 22 14:25:40 UTC 2025; locale (undefined) [latest-25328]2025-11-30T20:01:53.844Z <app:null> Basedir /opt/reactor; data in /var/reactor/storage [latest-25328]2025-11-30T20:01:53.844Z <app:null> NODE_PATH=/opt/reactor:/opt/reactor/node_modules [latest-25328]2025-11-30T20:01:53.865Z <app:null> Resolved timezone=America/New_York, environment TZ=America/New_York; offset minutes from UTC=-300 [latest-25328]2025-11-30T20:01:53.867Z <default:null> Module i18n v25141 [latest-25328]2025-11-30T20:01:53.867Z <app:null> Configured locale (undefined); selected locale(s) en-US.UTF-8 [latest-25328]2025-11-30T20:01:53.879Z <app:null> Loaded locale en-US for en-US [latest-25328]2025-11-30T20:01:53.879Z <app:null> Local date/time using configured timezone and locale formatting is "11/30/2025, 3:01:53 PM" [latest-25328]2025-11-30T20:01:53.889Z <Structure:null> Module Structure v25326 [latest-25328]2025-11-30T20:01:53.890Z <Capabilities:null> Module Capabilities v24312 [latest-25328]2025-11-30T20:01:53.904Z <Plugin:null> Module Plugin v25141 [latest-25328]2025-11-30T20:01:53.923Z <Timer:null> Module Timer v25279 [latest-25328]2025-11-30T20:01:53.924Z <TimerBroker:null> Module TimerBroker v25314 [latest-25328]2025-11-30T20:01:53.927Z <Entity:null> Module Entity v25251 [latest-25328]2025-11-30T20:01:53.929Z <Controller:null> Module Controller v25253 [latest-25328]2025-11-30T20:01:53.930Z <AlertManager:null> Module AlertManager v25318 [latest-25328]2025-11-30T20:01:53.937Z <default:null> Module Ruleset v25283 [latest-25328]2025-11-30T20:01:53.937Z <default:null> Module Rulesets v25141 [latest-25328]2025-11-30T20:01:53.942Z <GlobalExpression:null> Module GlobalExpression v25258 [latest-25328]2025-11-30T20:01:53.953Z <Predicate:null> Module Predicate v25328 [latest-25328]2025-11-30T20:01:53.956Z <Rule:null> Module Rule v25323 [latest-25328]2025-11-30T20:01:53.958Z <GlobalReaction:null> Module GlobalReaction v25292 [latest-25328]2025-11-30T20:01:53.959Z <Engine:null> Module Engine v25325 [latest-25328]2025-11-30T20:01:53.964Z <httpapi:null> Module httpapi v25328 [latest-25328]2025-11-30T20:01:53.972Z <wsapi:null> Module wsapi v25328 [latest-25328]2025-11-30T20:01:53.994Z <TaskQueue:null> Module TaskQueue 24138 [latest-25328]2025-11-30T20:01:53.994Z <VeraController:null> Module VeraController v25141 [latest-25328]2025-11-30T20:01:54.179Z <HassController:null> Module HassController v25325 [latest-25328]2025-11-30T20:02:13.797Z <OWMWeatherController:null> Module OWMWeatherController v25268 [latest-25328]2025-11-30T20:02:13.800Z <SystemController:null> Module SystemController v25323 [latest-25328]2025-11-30T20:02:13.807Z <MQTTController:null> Module MQTTController v22092 [latest-25328]2025-11-30T20:02:20.630Z <OWMWeatherController:CRIT> FetchError: request to https://api.openweathermap.org/data/2.5/weather?lat=xxxxxxxxxx&lon=-xxxxxxxxx&appid=xxxxxxxxxxxxxxxxxxxxxxxxxx&units=standard&_r=1xxxxxxxxxxxxxxfailed, reason: [-] FetchError: request to https://api.openweathermap.org/data/2.5/weather?lat=xxxxxxxxxxx&lon=-xxxxxxxxxxxxxxxxxx&appid=xxxxxxxxxxxxxxxxxxx&units=standard&_r=xxxxxxxxxxxxxxxfailed, reason: at ClientRequest.<anonymous> (/opt/reactor/node_modules/node-fetch/lib/index.js:1501:11) at ClientRequest.emit (node:events:508:28) at ClientRequest.emit (node:domain:489:12) at emitErrorEvent (node:_http_client:108:11) at TLSSocket.socketErrorListener (node:_http_client:575:5) at TLSSocket.emit (node:events:508:28) at TLSSocket.emit (node:domain:489:12) at emitErrorNT (node:internal/streams/destroy:170:8) at emitErrorCloseNT (node:internal/streams/destroy:129:3) at processTicksAndRejections (node:internal/process/task_queues:89:21
Multi-System Reactor
Date/time condition
tunnusT
Topic thumbnail image
Multi-System Reactor
Device log?
G
@toggledbits is there a log that will show me what rule is turning on a specific device? I've got a switch that has been kicking on at 2200 ET for several nights now and the reactor.log doesn't have a thing in it that I can see on a device level (it being more rules-based).
Multi-System Reactor
Midnight crossing not working in date/time condition (build 25325)
tunnusT
Topic thumbnail image
Multi-System Reactor
Reactor (Multi-System/Multi-Hub) Announcements
toggledbitsT
Build 21228 has been released. Docker images available from DockerHub as usual, and bare-metal packages here. Home Assistant up to version 2021.8.6 supported; the online version of the manual will now state the current supported versions; Fix an error in OWMWeatherController that could cause it to stop updating; Unify the approach to entity filtering on all hub interface classes (controllers); this works for device entities only; it may be extended to other entities later; Improve error detail in messages for EzloController during auth phase; Add isRuleSet() and isRuleEnabled() functions to expressions extensions; Implement set action for lock and passage capabilities (makes them more easily scriptable in some cases); Fix a place in the UI where 24-hour time was not being displayed.
Multi-System Reactor
[Solved] Local expression in Rule does not evaluate as they used to do
CrilleC
Topic thumbnail image
Multi-System Reactor
Home Assistant 2025.11.2 and latest-25315
CrilleC
Topic thumbnail image
Multi-System Reactor

Updated to latest MSR 21243 and no entities are being executed I Hubitat

Scheduled Pinned Locked Moved Multi-System Reactor
47 Posts 6 Posters 8.8k Views 6 Watching
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • M Offline
    M Offline
    Matteburk
    wrote on last edited by
    #14

    I checked and changed the lines to this ( I guess something is wrong there)
    [Unit]
    Description=Multi System Reactor
    After=network.target

    [Service]
    Type=simple
    User=pi
    WorkingDirectory=/home/pi/reactor
    Environment=NODE_PATH=/home/pi/reactor
    ExecStart=/home/pi/.local/lib/nodejs/node-v14.15.4-linux-armv7l/bin/node

    Restart=on-failure
    RestartSec=5s

    [Install]
    WantedBy=multi-user.target

    and restarted reactor....... then I see this in log.....

    Sep 5 15:26:16 raspberrypi systemd[9870]: reactor.service: Failed to determine user credentials: No such process
    Sep 5 15:26:16 raspberrypi systemd[9870]: reactor.service: Failed at step USER spawning /usr/local/lib/nodejs/bin/node: No such process
    Sep 5 15:26:16 raspberrypi systemd[1]: reactor.service: Main process exited, code=exited, status=217/USER
    Sep 5 15:26:16 raspberrypi systemd[1]: reactor.service: Failed with result 'exit-code'.
    Sep 5 15:26:21 raspberrypi systemd[1]: reactor.service: Service RestartSec=5s expired, scheduling restart.
    Sep 5 15:26:21 raspberrypi systemd[1]: reactor.service: Scheduled restart job, restart counter is at 20060.
    Sep 5 15:26:21 raspberrypi systemd[1]: Stopped Multi System Reactor.
    Sep 5 15:26:21 raspberrypi systemd[1]: Started Multi System Reactor.
    Sep 5 15:26:21 raspberrypi systemd[9871]: reactor.service: Failed to determine user credentials: No such process
    Sep 5 15:26:21 raspberrypi systemd[9871]: reactor.service: Failed at step USER spawning /usr/local/lib/nodejs/bin/node: No such process
    Sep 5 15:26:21 raspberrypi systemd[1]: reactor.service: Main process exited, code=exited, status=217/USER
    Sep 5 15:26:21 raspberrypi systemd[1]: reactor.service: Failed with result 'exit-code'.
    Sep 5 15:26:22 raspberrypi systemd[1]: Reloading.
    Sep 5 15:26:22 raspberrypi systemd[1]: /etc/systemd/system/teamviewerd.service:8: PIDFile= references path below legacy directory /var/run/, updating /var/run/teamviewerd.pid \u2192 /run/teamviewerd.pid; please update the unit file accordingly.
    Sep 5 15:26:26 raspberrypi systemd[1]: reactor.service: Service RestartSec=5s expired, scheduling restart.
    Sep 5 15:26:26 raspberrypi systemd[1]: reactor.service: Scheduled restart job, restart counter is at 20061.
    Sep 5 15:26:26 raspberrypi systemd[1]: Stopped Multi System Reactor.
    Sep 5 15:26:26 raspberrypi systemd[1]: Started Multi System Reactor.
    Sep 5 15:26:27 raspberrypi systemd[1]: reactor.service: Succeeded.
    Sep 5 15:26:42 raspberrypi systemd[1]: Started Multi System Reactor.
    Sep 5 15:26:43 raspberrypi systemd[1]: reactor.service: Succeeded.
    Sep 5 15:34:06 raspberrypi systemd[1]: Started Multi System Reactor.
    Sep 5 15:34:06 raspberrypi systemd[1]: reactor.service: Succeeded.

    1 Reply Last reply
    0
    • toggledbitsT Offline
      toggledbitsT Offline
      toggledbits
      wrote on last edited by
      #15

      It looks like it's referring to a different pathname for nodejs than you have configured in the service file. Did you make a change to that value somewhere along the way? If you make any changes to the config file, you need to do sudo systemctl daemon-reload to get systemd to read the updated config file. So the first step is to try sudo systemctl daemon-reload followed by sudo systemctl restart reactor.

      If that doesn't work, it is reported elsewhere that sudo systemctl daemon-reexec may resolve this (or perhaps simply rebooting the whole system).

      Then step three, if you're still not successful, is to see if Reactor is logging anything in its own log files.

      Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

      M 1 Reply Last reply
      0
      • toggledbitsT toggledbits

        It looks like it's referring to a different pathname for nodejs than you have configured in the service file. Did you make a change to that value somewhere along the way? If you make any changes to the config file, you need to do sudo systemctl daemon-reload to get systemd to read the updated config file. So the first step is to try sudo systemctl daemon-reload followed by sudo systemctl restart reactor.

        If that doesn't work, it is reported elsewhere that sudo systemctl daemon-reexec may resolve this (or perhaps simply rebooting the whole system).

        Then step three, if you're still not successful, is to see if Reactor is logging anything in its own log files.

        M Offline
        M Offline
        Matteburk
        wrote on last edited by
        #16

        @toggledbits

        I have followed your instructions but no success.

        Dont no what to do..... Here is the log from msr
        /Mattias

        Require stack:

        • /home/pi/reactor/server/lib/Engine.js
        • /home/pi/reactor/server/lib/httpapi.js
        • /home/pi/reactor/app.js
          Error: Cannot find module 'common/util'
          Require stack:
        • /home/pi/reactor/server/lib/Engine.js
        • /home/pi/reactor/server/lib/httpapi.js
        • /home/pi/reactor/app.js
          at Function.Module._resolveFilename (internal/modules/cjs/loader.js:880:15)
          at Function.Module._load (internal/modules/cjs/loader.js:725:27)
          at Module.require (internal/modules/cjs/loader.js:952:19)
          at require (internal/modules/cjs/helpers.js:88:18)
          at Engine._get_lexp_extensions (/home/pi/reactor/server/lib/Engine.js:862:25)
          at Rule.evaluateExpressions (/home/pi/reactor/server/lib/Rule.js:904:330)
          at Rule._evaluate (/home/pi/reactor/server/lib/Rule.js:994:344)
          at runMicrotasks (<anonymous>)
          at processTicksAndRejections (internal/process/task_queues.js:93:5)
          at async /home/pi/reactor/server/lib/Rule.js:963:17
          2021-09-06T16:19:30.352Z Rule:5:980:Rule.js Rule#rule-ksn5u2pn._evaluate() mutex acquired, evaluating
          2021-09-06T16:19:30.352Z Rule:5:984:Rule.js Rule#rule-ksn5u2pn update rate is 0/min limit 60/min
          2021-09-06T16:19:30.353Z Rule:5:904:Rule.js Rule#rule-ksn5u2pn evaluateExpressions() with 0 expressions
          2021-09-06T16:19:30.354Z Rule:CRIT Error: Cannot find module 'common/util'
          Require stack:
        • /home/pi/reactor/server/lib/Engine.js
        • /home/pi/reactor/server/lib/httpapi.js
        • /home/pi/reactor/app.js
          Error: Cannot find module 'common/util'
          Require stack:
        • /home/pi/reactor/server/lib/Engine.js
        • /home/pi/reactor/server/lib/httpapi.js
        • /home/pi/reactor/app.js
          at Function.Module._resolveFilename (internal/modules/cjs/loader.js:880:15)
          at Function.Module._load (internal/modules/cjs/loader.js:725:27)
          at Module.require (internal/modules/cjs/loader.js:952:19)
          at require (internal/modules/cjs/helpers.js:88:18)
          at Engine._get_lexp_extensions (/home/pi/reactor/server/lib/Engine.js:862:25)
          at Rule.evaluateExpressions (/home/pi/reactor/server/lib/Rule.js:904:330)
          at Rule._evaluate (/home/pi/reactor/server/lib/Rule.js:994:344)
          at runMicrotasks (<anonymous>)
          at processTicksAndRejections (internal/process/task_queues.js:93:5)
          at async /home/pi/reactor/server/lib/Rule.js:963:17
          2021-09-06T16:19:30.356Z Rule:5:980:Rule.js Rule#rule-ksm11ihr._evaluate() mutex acquired, evaluating
          2021-09-06T16:19:30.356Z Rule:5:984:Rule.js Rule#rule-ksm11ihr update rate is 0/min limit 60/min
          2021-09-06T16:19:30.357Z Rule:5:904:Rule.js Rule#rule-ksm11ihr evaluateExpressions() with 0 expressions
          2021-09-06T16:19:30.358Z Rule:CRIT Error: Cannot find module 'common/util'
          Require stack:
        • /home/pi/reactor/server/lib/Engine.js
        • /home/pi/reactor/server/lib/httpapi.js
        • /home/pi/reactor/app.js
          Error: Cannot find module 'common/util'
          Require stack:
        • /home/pi/reactor/server/lib/Engine.js
        • /home/pi/reactor/server/lib/httpapi.js
        • /home/pi/reactor/app.js
          at Function.Module._resolveFilename (internal/modules/cjs/loader.js:880:15)
          at Function.Module._load (internal/modules/cjs/loader.js:725:27)
          at Module.require (internal/modules/cjs/loader.js:952:19)
          at require (internal/modules/cjs/helpers.js:88:18)
          at Engine._get_lexp_extensions (/home/pi/reactor/server/lib/Engine.js:862:25)
          at Rule.evaluateExpressions (/home/pi/reactor/server/lib/Rule.js:904:330)
          at Rule._evaluate (/home/pi/reactor/server/lib/Rule.js:994:344)
          at runMicrotasks (<anonymous>)
          at processTicksAndRejections (internal/process/task_queues.js:93:5)
          at async /home/pi/reactor/server/lib/Rule.js:963:17
        CrilleC 1 Reply Last reply
        0
        • M Matteburk

          @toggledbits

          I have followed your instructions but no success.

          Dont no what to do..... Here is the log from msr
          /Mattias

          Require stack:

          • /home/pi/reactor/server/lib/Engine.js
          • /home/pi/reactor/server/lib/httpapi.js
          • /home/pi/reactor/app.js
            Error: Cannot find module 'common/util'
            Require stack:
          • /home/pi/reactor/server/lib/Engine.js
          • /home/pi/reactor/server/lib/httpapi.js
          • /home/pi/reactor/app.js
            at Function.Module._resolveFilename (internal/modules/cjs/loader.js:880:15)
            at Function.Module._load (internal/modules/cjs/loader.js:725:27)
            at Module.require (internal/modules/cjs/loader.js:952:19)
            at require (internal/modules/cjs/helpers.js:88:18)
            at Engine._get_lexp_extensions (/home/pi/reactor/server/lib/Engine.js:862:25)
            at Rule.evaluateExpressions (/home/pi/reactor/server/lib/Rule.js:904:330)
            at Rule._evaluate (/home/pi/reactor/server/lib/Rule.js:994:344)
            at runMicrotasks (<anonymous>)
            at processTicksAndRejections (internal/process/task_queues.js:93:5)
            at async /home/pi/reactor/server/lib/Rule.js:963:17
            2021-09-06T16:19:30.352Z Rule:5:980:Rule.js Rule#rule-ksn5u2pn._evaluate() mutex acquired, evaluating
            2021-09-06T16:19:30.352Z Rule:5:984:Rule.js Rule#rule-ksn5u2pn update rate is 0/min limit 60/min
            2021-09-06T16:19:30.353Z Rule:5:904:Rule.js Rule#rule-ksn5u2pn evaluateExpressions() with 0 expressions
            2021-09-06T16:19:30.354Z Rule:CRIT Error: Cannot find module 'common/util'
            Require stack:
          • /home/pi/reactor/server/lib/Engine.js
          • /home/pi/reactor/server/lib/httpapi.js
          • /home/pi/reactor/app.js
            Error: Cannot find module 'common/util'
            Require stack:
          • /home/pi/reactor/server/lib/Engine.js
          • /home/pi/reactor/server/lib/httpapi.js
          • /home/pi/reactor/app.js
            at Function.Module._resolveFilename (internal/modules/cjs/loader.js:880:15)
            at Function.Module._load (internal/modules/cjs/loader.js:725:27)
            at Module.require (internal/modules/cjs/loader.js:952:19)
            at require (internal/modules/cjs/helpers.js:88:18)
            at Engine._get_lexp_extensions (/home/pi/reactor/server/lib/Engine.js:862:25)
            at Rule.evaluateExpressions (/home/pi/reactor/server/lib/Rule.js:904:330)
            at Rule._evaluate (/home/pi/reactor/server/lib/Rule.js:994:344)
            at runMicrotasks (<anonymous>)
            at processTicksAndRejections (internal/process/task_queues.js:93:5)
            at async /home/pi/reactor/server/lib/Rule.js:963:17
            2021-09-06T16:19:30.356Z Rule:5:980:Rule.js Rule#rule-ksm11ihr._evaluate() mutex acquired, evaluating
            2021-09-06T16:19:30.356Z Rule:5:984:Rule.js Rule#rule-ksm11ihr update rate is 0/min limit 60/min
            2021-09-06T16:19:30.357Z Rule:5:904:Rule.js Rule#rule-ksm11ihr evaluateExpressions() with 0 expressions
            2021-09-06T16:19:30.358Z Rule:CRIT Error: Cannot find module 'common/util'
            Require stack:
          • /home/pi/reactor/server/lib/Engine.js
          • /home/pi/reactor/server/lib/httpapi.js
          • /home/pi/reactor/app.js
            Error: Cannot find module 'common/util'
            Require stack:
          • /home/pi/reactor/server/lib/Engine.js
          • /home/pi/reactor/server/lib/httpapi.js
          • /home/pi/reactor/app.js
            at Function.Module._resolveFilename (internal/modules/cjs/loader.js:880:15)
            at Function.Module._load (internal/modules/cjs/loader.js:725:27)
            at Module.require (internal/modules/cjs/loader.js:952:19)
            at require (internal/modules/cjs/helpers.js:88:18)
            at Engine._get_lexp_extensions (/home/pi/reactor/server/lib/Engine.js:862:25)
            at Rule.evaluateExpressions (/home/pi/reactor/server/lib/Rule.js:904:330)
            at Rule._evaluate (/home/pi/reactor/server/lib/Rule.js:994:344)
            at runMicrotasks (<anonymous>)
            at processTicksAndRejections (internal/process/task_queues.js:93:5)
            at async /home/pi/reactor/server/lib/Rule.js:963:17
          CrilleC Offline
          CrilleC Offline
          Crille
          wrote on last edited by
          #17

          @matteburk Try installing 21200 just to see if you get MSR running again.

          M 1 Reply Last reply
          0
          • toggledbitsT Offline
            toggledbitsT Offline
            toggledbits
            wrote on last edited by toggledbits
            #18

            The messages in the log you posted indicate that NODE_PATH is incorrectly set, so I now cannot be sure if we're back at your original problem because you have tried to run it from the command line and this log is from that, or if this log is from an attempted systemd startup, which makes no sense because the service file you published earlier sets the environment variable correctly.

            I've given you everything you need to get going again. I'm not sure what else to do. You need to figure it out, though, because this is how this and all future builds will be working, and right now, you're the only person I know of that isn't running, so I'm assuming its a local configuration issue and not a package/software issue.

            Can you stop any local startup, start again with systemd, and post the startup portion of the log file? I don't want to see the error message again, I need to see all the messages from a Reactor startup under systemd. That will start with the string Reactor <version> starting on <nodejs version> and give me everything up to Startup complete.

            Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

            M 2 Replies Last reply
            0
            • toggledbitsT toggledbits

              The messages in the log you posted indicate that NODE_PATH is incorrectly set, so I now cannot be sure if we're back at your original problem because you have tried to run it from the command line and this log is from that, or if this log is from an attempted systemd startup, which makes no sense because the service file you published earlier sets the environment variable correctly.

              I've given you everything you need to get going again. I'm not sure what else to do. You need to figure it out, though, because this is how this and all future builds will be working, and right now, you're the only person I know of that isn't running, so I'm assuming its a local configuration issue and not a package/software issue.

              Can you stop any local startup, start again with systemd, and post the startup portion of the log file? I don't want to see the error message again, I need to see all the messages from a Reactor startup under systemd. That will start with the string Reactor <version> starting on <nodejs version> and give me everything up to Startup complete.

              M Offline
              M Offline
              Matteburk
              wrote on last edited by
              #19

              @toggledbits ok... yes for sure it is me setting something up wrong... will struggle some more... 🙂

              1 Reply Last reply
              0
              • CrilleC Crille

                @matteburk Try installing 21200 just to see if you get MSR running again.

                M Offline
                M Offline
                Matteburk
                wrote on last edited by
                #20

                @crille tried .....

                1 Reply Last reply
                0
                • toggledbitsT toggledbits

                  The messages in the log you posted indicate that NODE_PATH is incorrectly set, so I now cannot be sure if we're back at your original problem because you have tried to run it from the command line and this log is from that, or if this log is from an attempted systemd startup, which makes no sense because the service file you published earlier sets the environment variable correctly.

                  I've given you everything you need to get going again. I'm not sure what else to do. You need to figure it out, though, because this is how this and all future builds will be working, and right now, you're the only person I know of that isn't running, so I'm assuming its a local configuration issue and not a package/software issue.

                  Can you stop any local startup, start again with systemd, and post the startup portion of the log file? I don't want to see the error message again, I need to see all the messages from a Reactor startup under systemd. That will start with the string Reactor <version> starting on <nodejs version> and give me everything up to Startup complete.

                  M Offline
                  M Offline
                  Matteburk
                  wrote on last edited by Matteburk
                  #21

                  @toggledbits
                  I dont see the string reactor version starting on XXXX as you wrote.

                  From the var/log syslog I get this after stopped and started reactor via systemctl restart reactor

                  Sep 6 20:58:49 raspberrypi systemd[1]: Started Multi System Reactor.
                  Sep 6 20:58:50 raspberrypi systemd[1]: reactor.service: Succeeded.
                  Sep 6 21:00:41 raspberrypi dbus-daemon[402]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.57' (uid=1000 pid=1071 comm="/usr/lib/chromium-browser/chromium-browser-v7 --fo")
                  Sep 6 21:00:41 raspberrypi systemd[1]: Starting Hostname Service...
                  Sep 6 21:00:41 raspberrypi dbus-daemon[402]: [system] Successfully activated service 'org.freedesktop.hostname1'
                  Sep 6 21:00:41 raspberrypi systemd[1]: Started Hostname Service.

                  1 Reply Last reply
                  0
                  • toggledbitsT Offline
                    toggledbitsT Offline
                    toggledbits
                    wrote on last edited by
                    #22

                    In reactor.log

                    Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                    M 1 Reply Last reply
                    0
                    • toggledbitsT toggledbits

                      In reactor.log

                      M Offline
                      M Offline
                      Matteburk
                      wrote on last edited by
                      #23

                      @toggledbits
                      hmmm nothing is being logged there after stop ,start. the log file has not been updated since I tried node app.js for a couple of hours ago

                      1 Reply Last reply
                      0
                      • toggledbitsT Offline
                        toggledbitsT Offline
                        toggledbits
                        wrote on last edited by
                        #24

                        OK. Post that startup, then. It will tell me a few things as well.

                        Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                        1 Reply Last reply
                        0
                        • toggledbitsT Offline
                          toggledbitsT Offline
                          toggledbits
                          wrote on last edited by toggledbits
                          #25

                          Wait, I'm really confused, you said "nothing is being logged there after stop ,start". Then where did the stuff you posted here come from?

                          Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                          M 2 Replies Last reply
                          0
                          • toggledbitsT toggledbits

                            Wait, I'm really confused, you said "nothing is being logged there after stop ,start". Then where did the stuff you posted here come from?

                            M Offline
                            M Offline
                            Matteburk
                            wrote on last edited by
                            #26

                            @toggledbits they that you refer to are there but nothing after I now stopped and started

                            1 Reply Last reply
                            0
                            • toggledbitsT toggledbits

                              Wait, I'm really confused, you said "nothing is being logged there after stop ,start". Then where did the stuff you posted here come from?

                              M Offline
                              M Offline
                              Matteburk
                              wrote on last edited by
                              #27

                              @toggledbits But if I no try to start via node app.js
                              I get in terminal window

                              pi@raspberrypi:~ $ node app.js
                              internal/modules/cjs/loader.js:883
                              throw err;
                              ^

                              Error: Cannot find module '/home/pi/app.js'
                              at Function.Module._resolveFilename (internal/modules/cjs/loader.js:880:15)
                              at Function.Module._load (internal/modules/cjs/loader.js:725:27)
                              at Function.executeUserEntryPoint [as runMain] (internal/modules/run_main.js:72:12)
                              at internal/main/run_main_module.js:17:47 {
                              code: 'MODULE_NOT_FOUND',
                              requireStack: []
                              }
                              pi@raspberrypi:~ $

                              1 Reply Last reply
                              0
                              • toggledbitsT Offline
                                toggledbitsT Offline
                                toggledbits
                                wrote on last edited by
                                #28

                                Well that's because you're not in the Reactor directory.

                                Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                                M 1 Reply Last reply
                                0
                                • toggledbitsT toggledbits

                                  Well that's because you're not in the Reactor directory.

                                  M Offline
                                  M Offline
                                  Matteburk
                                  wrote on last edited by
                                  #29

                                  @toggledbits
                                  Gaaah..... im tired and beginner.....Sorry....

                                  ok so this I no get when I run node app.js

                                  2021-09-06T19:59:36.893Z Rule:5:980:Rule.js Rule#rule-kmst5xze._evaluate() mutex acquired, evaluating
                                  2021-09-06T19:59:36.894Z Rule:5:984:Rule.js Rule#rule-kmst5xze update rate is 1/min limit 60/min
                                  2021-09-06T19:59:36.895Z Rule:5:904:Rule.js Rule#rule-kmst5xze evaluateExpressions() with 0 expressions
                                  2021-09-06T19:59:36.897Z Rule:CRIT Error: Cannot find module 'common/util'
                                  Require stack:

                                  • /home/pi/reactor/server/lib/Engine.js
                                  • /home/pi/reactor/server/lib/httpapi.js
                                  • /home/pi/reactor/app.js
                                    Error: Cannot find module 'common/util'
                                    Require stack:
                                  • /home/pi/reactor/server/lib/Engine.js
                                  • /home/pi/reactor/server/lib/httpapi.js
                                  • /home/pi/reactor/app.js
                                    at Function.Module._resolveFilename (internal/modules/cjs/loader.js:880:15)
                                    at Function.Module._load (internal/modules/cjs/loader.js:725:27)
                                    at Module.require (internal/modules/cjs/loader.js:952:19)
                                    at require (internal/modules/cjs/helpers.js:88:18)
                                    at Engine._get_lexp_extensions (/home/pi/reactor/server/lib/Engine.js:862:25)
                                    at Rule.evaluateExpressions (/home/pi/reactor/server/lib/Rule.js:904:330)
                                    at Rule._evaluate (/home/pi/reactor/server/lib/Rule.js:994:344)
                                    at processTicksAndRejections (internal/process/task_queues.js:93:5)
                                    at async /home/pi/reactor/server/lib/Rule.js:963:17
                                  1 Reply Last reply
                                  0
                                  • toggledbitsT Offline
                                    toggledbitsT Offline
                                    toggledbits
                                    wrote on last edited by toggledbits
                                    #30

                                    Right. And we've covered that. If you run it from the command line, you need to use

                                        NODE_PATH=$(pwd) node app
                                    

                                    Do that, and please post (a) the startup messages from logs/reactor.log as specified in my previous post, and (b) the contents of /etc/systemd/system/reactor.service again.

                                    Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                                    M 1 Reply Last reply
                                    1
                                    • toggledbitsT toggledbits

                                      Right. And we've covered that. If you run it from the command line, you need to use

                                          NODE_PATH=$(pwd) node app
                                      

                                      Do that, and please post (a) the startup messages from logs/reactor.log as specified in my previous post, and (b) the contents of /etc/systemd/system/reactor.service again.

                                      M Offline
                                      M Offline
                                      Matteburk
                                      wrote on last edited by
                                      #31

                                      @toggledbits

                                      We have a winner!

                                      I did
                                      cd reactor
                                      NODE_PATH=$(pwd) node app ( this line I totally missed)

                                      and my house lit up like a Christmas trea!😂

                                      Thank you for your patience with me Patrick!

                                      1 Reply Last reply
                                      0
                                      • toggledbitsT Offline
                                        toggledbitsT Offline
                                        toggledbits
                                        wrote on last edited by
                                        #32

                                        No, we're not done. That's not the way to run Reactor. You need to be running it under systemd. Please provide the information above as requested.

                                        Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                                        M 1 Reply Last reply
                                        0
                                        • toggledbitsT toggledbits

                                          No, we're not done. That's not the way to run Reactor. You need to be running it under systemd. Please provide the information above as requested.

                                          M Offline
                                          M Offline
                                          Matteburk
                                          wrote on last edited by toggledbits
                                          #33

                                          @toggledbits
                                          hehe.... went exited

                                          /etc/systemd/system/reactor.service......

                                          [Unit]
                                          Description=Multi System Reactor
                                          After=network.target
                                          
                                          [Service]
                                          Type=simple
                                          User=pi
                                          WorkingDirectory=/home/pi/reactor
                                          Environment=NODE_PATH=/home/pi/reactor
                                          ExecStart=/home/pi/.local/lib/nodejs/node-v14.15.4-linux-armv7l/bin/node
                                          
                                          
                                          
                                          Restart=on-failure
                                          RestartSec=5s
                                          
                                          [Install]
                                          WantedBy=multi-user.target
                                          

                                          Reactor log......

                                          2021-09-06T20:07:08.063Z <app:null> Reactor "1.0.1-21243-ab6d917" starting on v14.15.4
                                          2021-09-06T20:07:08.066Z <app:INFO> Process ID 3029; platform linux/arm #1408 SMP Mon Mar 22 12:49:24 GMT 2021; locale [ "sv-SE", "UTF-8" ]
                                          2021-09-06T20:07:08.067Z <app:INFO> Basedir /home/pi/reactor; data in /home/pi/reactor/storage
                                          2021-09-06T20:07:08.067Z <app:INFO> NODE_PATH /home/pi/reactor; module paths [ "/home/pi/reactor/node_modules", "/home/pi/node_modules", "/home/node_modules", "/node_modules" ]
                                          2021-09-06T20:07:08.241Z <Plugin:null> Module Plugin v21173
                                          2021-09-06T20:07:08.273Z <default:INFO> Module Entity v21177
                                          2021-09-06T20:07:08.284Z <Controller:null> Module Controller v21226
                                          2021-09-06T20:07:08.286Z <default:null> Module Structure v21229
                                          2021-09-06T20:07:08.305Z <default:null> Module Ruleset v21096
                                          2021-09-06T20:07:08.306Z <default:null> Module Rulesets v21096
                                          2021-09-06T20:07:08.380Z <default:null> Module Rule v21224
                                          2021-09-06T20:07:08.397Z <default:null> Module Engine v21213
                                          2021-09-06T20:07:08.399Z <default:null> Module httpapi v21238
                                          2021-09-06T20:07:08.406Z <default:null> Module httpproxy v21054
                                          2021-09-06T20:07:08.450Z <default:null> Module wsapi v21196
                                          2021-09-06T20:07:08.454Z <app:NOTICE> Starting Structure...
                                          2021-09-06T20:07:08.463Z <Structure:INFO> Structure#1 starting controller interface vera (VeraController)
                                          2021-09-06T20:07:08.473Z <Structure:INFO> Structure#1 starting controller interface hubitat (HubitatController)
                                          2021-09-06T20:07:08.480Z <Structure:INFO> Structure#1 starting controller interface reactor_system (SystemController)
                                          2021-09-06T20:07:08.622Z <default:null> Module VeraController v21236
                                          2021-09-06T20:07:08.629Z <default:null> Module HubitatController v21243
                                          2021-09-06T20:07:08.632Z <default:null> Module SystemController v21102
                                          2021-09-06T20:07:08.642Z <VeraController:NOTICE> VeraController#vera starting
                                          2021-09-06T20:07:08.765Z <VeraController:INFO> VeraController#vera loaded mapping ver 21236 rev 1 format 1 notice 
                                          2021-09-06T20:07:08.767Z <VeraController:INFO> VeraController: deviceclass vera_system_object capability sys_system does not provide attribute state
                                          2021-09-06T20:07:08.887Z <Controller:NOTICE> Controller SystemController#reactor_system is now online.
                                          2021-09-06T20:07:09.035Z <app:INFO> Structure running; pausing for controllers' initial ready
                                          2021-09-06T20:07:09.044Z <Controller:NOTICE> HubitatController#hubitat not ready; performing initial connect/query
                                          2021-09-06T20:07:09.629Z <VeraController:NOTICE> Controller VeraController#vera is now online.
                                          2021-09-06T20:07:10.118Z <Controller:ERR> HubitatController#hubitat mapped capability x_hubitat_healthcheck has no implementation
                                          2021-09-06T20:07:10.158Z <Controller:ERR> HubitatController#hubitat mapped capability x_hubitat_healthcheck has no implementation
                                          2021-09-06T20:07:10.274Z <Controller:ERR> HubitatController#hubitat mapped capability x_hubitat_healthcheck has no implementation
                                          2021-09-06T20:07:10.281Z <Controller:ERR> HubitatController#hubitat mapped capability x_hubitat_healthcheck has no implementation
                                          2021-09-06T20:07:10.287Z <Controller:ERR> HubitatController#hubitat mapped capability x_hubitat_healthcheck has no implementation
                                          2021-09-06T20:07:10.289Z <Controller:ERR> HubitatController#hubitat mapped capability x_hubitat_healthcheck has no implementation
                                          2021-09-06T20:07:10.318Z <Controller:ERR> HubitatController#hubitat mapped capability x_hubitat_healthcheck has no implementation
                                          2021-09-06T20:07:10.326Z <Controller:ERR> HubitatController#hubitat mapped capability x_hubitat_healthcheck has no implementation
                                          2021-09-06T20:07:10.331Z <Controller:ERR> HubitatController#hubitat mapped capability x_hubitat_healthcheck has no implementation
                                          2021-09-06T20:07:10.478Z <Controller:INFO> HubitatController#hubitat connecting to hub's eventsocket WebSocket API at ws://192.168.68.145/eventsocket
                                          2021-09-06T20:07:10.484Z <Controller:NOTICE> Controller HubitatController#hubitat is now online.
                                          2021-09-06T20:07:10.489Z <app:NOTICE> Starting Reaction Engine...
                                          2021-09-06T20:07:10.491Z <Engine:INFO> Reaction Engine starting
                                          2021-09-06T20:07:10.492Z <Engine:INFO> Checking rule sets...
                                          2021-09-06T20:07:10.504Z <Engine:INFO> Checking rules...
                                          2021-09-06T20:07:10.506Z <Engine:INFO> Data check complete; no corrections.
                                          
                                          1 Reply Last reply
                                          0
                                          Reply
                                          • Reply as topic
                                          Log in to reply
                                          • Oldest to Newest
                                          • Newest to Oldest
                                          • Most Votes


                                          Recent Topics

                                          • Copying a global reaction
                                            toggledbitsT
                                            toggledbits
                                            0
                                            3
                                            66

                                          • [HowTo] Using HABridge with Reactor
                                            CatmanV2C
                                            CatmanV2
                                            0
                                            9
                                            368

                                          • [Reactor] Bug when sending MQTT boolean payloads
                                            toggledbitsT
                                            toggledbits
                                            0
                                            4
                                            121

                                          • Genuinely impressed with Zigbee and HA / Reactor
                                            therealdbT
                                            therealdb
                                            1
                                            8
                                            275

                                          • Difficulty defining repeating annual period
                                            G
                                            gwp1
                                            0
                                            5
                                            73

                                          • Need help with sequence
                                            therealdbT
                                            therealdb
                                            0
                                            3
                                            44

                                          • Possible feature request?
                                            therealdbT
                                            therealdb
                                            0
                                            5
                                            159

                                          • Logic Assistance: Exterior Lights on when Illuminance Below Threshold
                                            CatmanV2C
                                            CatmanV2
                                            0
                                            11
                                            325

                                          • Time series documentation
                                            tunnusT
                                            tunnus
                                            0
                                            11
                                            382

                                          • MQTT templates for ZIgbee scene controller, or a better way?
                                            CatmanV2C
                                            CatmanV2
                                            0
                                            3
                                            152

                                          • Reset a delay
                                            CatmanV2C
                                            CatmanV2
                                            0
                                            8
                                            213
                                          Powered by NodeBB | Contributors
                                          Hosted freely by 10RUPTiV - Solutions Technologiques | Contact us
                                          • Login

                                          • Don't have an account? Register

                                          • Login or register to search.
                                          • First post
                                            Last post
                                          0
                                          • Categories
                                          • Recent
                                          • Tags
                                          • Popular
                                          • Unsolved