Skip to content
  • Categories
  • Recent
  • Tags
  • Popular
  • Unsolved
Collapse
Discussion Forum to share and further the development of home control and automation, independent of platforms.
  1. Home
  2. Software
  3. Multi-System Reactor
  4. Updated to latest MSR 21243 and no entities are being executed I Hubitat
Gradually turn on lights.
Tom_DT
I have several lights that I would like to turn on very gradually over 15 or 20 seconds. from 0 to .25 in .01 increments. I have tried a few things that came nowhere near working, so here I am.
Multi-System Reactor
Stop the MSR by an external switch on Hubitat.
wmarcolinW
Use case: When performing home maintenance, such as air conditioning, I want all rules involving air conditioning to be disabled. To do this, to day, I have a virtual switch that I placed within all rules involving air conditioning, meaning that if I turn it off, none of them work. Then another situation: the water pump system and garden irrigation, another switch. In short, I had to create several virtual switches in Hubitat to disable rules in MSR. Unfortunately, however, I was unable to cover all scenarios, so I wondered if it would be possible for MSR to support a virtual MSR switch, which, when configured in the reactor settings, would function as a general on/off switch for MSR. If it is configured and turned off, the entire rules and actions in MSR stops working, except for the status change reading process, specifically for this switch, which, when turned on, would restart the MSR. Would it be possible to do something like this? Any recommendations from the experts?
Multi-System Reactor
Error After Upgrade
T
Topic thumbnail image
Multi-System Reactor
Reset attribute value of entity in event handler
R
Topic thumbnail image
Multi-System Reactor
Need help figuring out how to delay a reset on reaction
T
Topic thumbnail image
Multi-System Reactor
Way to search for rules (rule state) in other rules
T
@toggledbits, not sure if this is a feature request or I'm using the search tool wrong. You have a "Search for rule" in the Rules Set tab in MSR. It works nicely to find a rule and bring up said rule, but can it/could it be used for as a "where used?" global search? For instance, I have a fairly large set of rules, divided up into 10 different rulesets. There's easily a hundred individual rules, and many of the rules have Rule State triggers, which of course refer to other rules. Amongst my troubleshooting today, I came across what may have been a duplicate or troubleshooting attempt, but I can't tell if it's actually used as a Rule State in another rule without opening each rule that I suspect it may be a part of. Thanks.
Multi-System Reactor
Links to MSR from HA
Tom_DT
I am using Home Assistant a lot recently. On a dashboard showing the devices, I would like to show a link to the MSR rule that controls the devices. Is there a way to link directly into MSR?
Multi-System Reactor
Set Reaction > Script Action
wmarcolinW
Topic thumbnail image
Multi-System Reactor
Errors after updating to MQTTController build 25139
tunnusT
I'm running MSR build 25139 on Docker, using MQTT controller 24293, and everything working as expected. But if I try to upgrade to MQTTController build 25139, I'm getting the following errors on MSR UI: An Entity Attribute condition in "Lay-Z-Spa auto heating off" (Terrace) failed because the referenced entity "Lay-Z-Spa States" (mqtt>layzspa_states) does not have attribute value_sensor.god Last 11:20:37 An Entity Attribute condition in "Lay-Z-Spa auto heating off" (Terrace) failed because the referenced entity "Lay-Z-Spa States" (mqtt>layzspa_states) does not have attribute temperature_sensor.green Last 11:20:37 An Entity Attribute condition in "Lay-Z-Spa filter pump auto off" (Terrace) failed because the referenced entity "Lay-Z-Spa States" (mqtt>layzspa_states) does not have attribute temperature_sensor.red Last 11:20:37 An Entity Attribute condition in "Lay-Z-Spa filter pump auto run" (Terrace) failed because the referenced entity "Lay-Z-Spa States" (mqtt>layzspa_states) does not have attribute value_sensor.pump Last 11:20:37 An Entity Attribute condition in "Lay-Z-Spa watchdog" (Terrace) failed because the referenced entity "Lay-Z-Spa States" (mqtt>layzspa_states) does not have attribute value_sensor.status Last 11:20:37 My MQTT configuration (local_mqtt_devices.yaml) for the related entity is: layzspa_message: type: ValueSensor capabilities: ["temperature_sensor", "value_sensor", "power_sensor"] primary_attribute: power_sensor.value events: "layzspa/message": "power_sensor.value": json_payload: true if_expr: '! isnull( payload?.PWR )' expr: "float(payload.PWR)" "value_sensor.air": json_payload: true if_expr: '! isnull( payload?.AIR )' expr: "float(payload.AIR)" "value_sensor.pump": json_payload: true if_expr: '! isnull( payload?.FLT )' expr: "float(payload.FLT)" "value_sensor.god": json_payload: true if_expr: '! isnull( payload?.GOD )' expr: "float(payload.GOD)" "value_sensor.lock": json_payload: true if_expr: '! isnull( payload?.LCK )' expr: "float(payload.LCK)" "value_sensor.unit": json_payload: true if_expr: '! isnull( payload?.UNT )' expr: "float(payload.UNT)" "value_sensor.error": json_payload: true if_expr: '! isnull( payload?.ERR )' expr: "float(payload.ERR)" "temperature_sensor.green": json_payload: true if_expr: '! isnull( payload?.GRN )' expr: "float(payload.GRN)" "temperature_sensor.red": json_payload: true if_expr: '! isnull( payload?.RED )' expr: "float(payload.RED)" "temperature_sensor.target": json_payload: true if_expr: '! isnull( payload?.TGT )' expr: "float(payload.TGT)" "temperature_sensor.value": json_payload: true if_expr: '! isnull( payload?.TMP )' expr: "float(payload.TMP)" "temperature_sensor.virtual": json_payload: true if_expr: '! isnull( payload?.VTM )' expr: "round(float(payload.VTM), 1)" "temperature_sensor.ambient": json_payload: true if_expr: '! isnull( payload?.AMB )' expr: "float(payload.AMB)" "layzspa/Status": "value_sensor.status": if_expr: '! isnull( payload )' expr: "payload" "layzspa/button": "value_sensor.button": if_expr: '! isnull( payload )' expr: "payload" and in reactor.yaml I have: "layzspa_states": name: "Lay-Z-Spa States" friendly_name: 'Lay-Z-Spa States' include: layzspa_message I realize my MQTT configuration might be a bit unorthodox, but could there still be something unintentional in the latest MQTTController build? If needed, I can provide detailed logs.
Multi-System Reactor
🎉 My very first MSR controller: OpenSprinkler
therealdbT
Since today is my birthday - and I still pretend to be unconventional - I'm giving away a present to this wonderful community and I'm releasing my first OpenSprinkler controller for MSR. It was real fun to code it - and while it's still WIP, it seems to work OK for me. It's polling-based at the moment, but I'll add support for updates via MQTT very soon (it's already partially coded). Get it at (install is similar to MQTTController and such): https://github.com/dbochicchio/reactor-opensprinkler Feel free to try it. It's beta software, but it's stable. I'll update it weekly until all the tasks from my todo list are empty. Since I've learnt a lot from this controller, I'll explore new controllers soon.
Multi-System Reactor
Advice reqeusted to migrate MSR from Bare Metal to Container
T
Good day all, I'm in the process of trying to shut down my 10 year old Linux home server that served many purposes, but primarily it's what I used for my NAS/Plex Media server. I migrated the NAS aspect of the server in November of last year to a true NAS solution (Ubiquti UNAS Pro), which is rack mount and much more efficient than my old tower, which it's only side benefit was heating my home office during the winter. Unfortunately it also means heating my home office during the summer, which were about to be in full swing. I have two things running on this 10 year old server at this point. MSR and pi-hole. I'm running Plex Media Server on Fedora Workstation in Podman on mini PC, which is much more energy efficient than my old tower. My next step is to migrate MSR. I know there are images of MSR out there, and creating it is well documented. I'm going to be using Podman instead of Docker for various reasons, but they work very similar. What I don't know, is what I need to do to migrate my existing Bare Metal installation over to a container. Has anyone done this? Any advice?
Multi-System Reactor
Reactor (Multi-System/Multi-Hub) Announcements
toggledbitsT
Build 21228 has been released. Docker images available from DockerHub as usual, and bare-metal packages here. Home Assistant up to version 2021.8.6 supported; the online version of the manual will now state the current supported versions; Fix an error in OWMWeatherController that could cause it to stop updating; Unify the approach to entity filtering on all hub interface classes (controllers); this works for device entities only; it may be extended to other entities later; Improve error detail in messages for EzloController during auth phase; Add isRuleSet() and isRuleEnabled() functions to expressions extensions; Implement set action for lock and passage capabilities (makes them more easily scriptable in some cases); Fix a place in the UI where 24-hour time was not being displayed.
Multi-System Reactor
Can´t restart or upgrade/deploy MSR
F
Topic thumbnail image
Multi-System Reactor
[Solved] Limit HA Entity in MSR
wmarcolinW
Topic thumbnail image
Multi-System Reactor
Organizing/ structuring rule sets and rules
R
Hi guys, Just wondering how you guys organize your rule sets and rules. I wish I had an extra layer to have some more granularity, but my feature request was not popular. Maybe there are better ways to organize my rule sets. I use the rule sets now primarily for rooms. So a rule set per room. But maybe grouping by functionality works better. Any examples/ suggestions would be appreciated.
Multi-System Reactor
Moving MSR from a QNAP container to RP 5 - some issues
Tom_DT
Topic thumbnail image
Multi-System Reactor
Widget deletion does not work and landing page (status) is empy
M
Topic thumbnail image
Multi-System Reactor
Need help reducing false positive notifications
T
Topic thumbnail image
Multi-System Reactor
Deleting widgets
tunnusT
Hopefully a trivial question, but how do you delete widgets in a status page? Using build 22266
Multi-System Reactor
MQTT configuration question
tunnusT
I have the following yaml configuration in local_mqtt_devices file x_mqtt_device: set_speed: arguments: speed: type: str topic: "command/%friendly_name%" payload: type: json expr: '{ "fan": parameters.speed }' While this works fine, I'm wondering how this could be changed to "fixed" parameters, as in this case "fan" only accepts "A", "Q" or a numeric value of 1-5?
Multi-System Reactor

Updated to latest MSR 21243 and no entities are being executed I Hubitat

Scheduled Pinned Locked Moved Multi-System Reactor
47 Posts 6 Posters 4.7k Views 6 Watching
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • J Offline
    J Offline
    Jaggz
    wrote on last edited by
    #6

    Had the same issue. Reaction as a group would not fire but entities within the Reaction would when manually selecting them (hit the little play button next to them). Everything else looked normal from a Status perspective (i.e. motion detected sending the rule into green status, etc). I fixed the problem by installing a fresh copy (leaving the reactor-data folder untouched).

    1 Reply Last reply
    0
    • toggledbitsT Offline
      toggledbitsT Offline
      toggledbits
      wrote on last edited by
      #7

      Make sure you are on the latest version, and NODE_PATH (environment variable) is defined correctly (how that is done depends on how you run Reactor).

      Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

      M 1 Reply Last reply
      0
      • toggledbitsT toggledbits

        Make sure you are on the latest version, and NODE_PATH (environment variable) is defined correctly (how that is done depends on how you run Reactor).

        M Offline
        M Offline
        Matteburk
        wrote on last edited by
        #8

        @toggledbits I run it with Node app.js

        toggledbitsT 1 Reply Last reply
        0
        • M Matteburk

          @toggledbits I run it with Node app.js

          toggledbitsT Offline
          toggledbitsT Offline
          toggledbits
          wrote on last edited by
          #9

          @matteburk OK. So the direct solution to your problem is to run it this way: NODE_PATH=$(pwd) node app.js

          You really should be running it from systemd on the RPi, though. The command line startup is only for initial validation and setup, it's not meant to be the way to run MSR long term.

          In the tools subdirectory, you'll find a file called reactor.service-example. To install MSR under systemd, do the following:

          1. Copy the above-named file into your /etc/systemd/system directory and rename it to drop the -example part. For example:

             sudo cp tools/reactor.service-example /etc/systemd/system/reactor.service
            
          2. Edit the new file and change the pathnames to match your install directory. Remember that the file is installed in a restricted directory, so you need to use sudo with your editor:

             sudo nano /etc/systemd/system/reactor.service
            
          3. Once you have the file edited with correct names/parameters, stop your existing Reactor process.

          4. Make systemd aware of the changed configuration file:

             sudo systemctl daemon-reload
            
          5. Start Reactor under systemd:

             sudo systemctl start reactor
            

          If you need to stop Reactor later, that's systemctl stop reactor. You can also restart a running Reactor with systemctl restart reactor.

          Running Reactor under systemd will automatically restart it if it crashes, and start it up automatically when your RPi boots up.

          Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

          M 1 Reply Last reply
          0
          • toggledbitsT toggledbits

            @matteburk OK. So the direct solution to your problem is to run it this way: NODE_PATH=$(pwd) node app.js

            You really should be running it from systemd on the RPi, though. The command line startup is only for initial validation and setup, it's not meant to be the way to run MSR long term.

            In the tools subdirectory, you'll find a file called reactor.service-example. To install MSR under systemd, do the following:

            1. Copy the above-named file into your /etc/systemd/system directory and rename it to drop the -example part. For example:

               sudo cp tools/reactor.service-example /etc/systemd/system/reactor.service
              
            2. Edit the new file and change the pathnames to match your install directory. Remember that the file is installed in a restricted directory, so you need to use sudo with your editor:

               sudo nano /etc/systemd/system/reactor.service
              
            3. Once you have the file edited with correct names/parameters, stop your existing Reactor process.

            4. Make systemd aware of the changed configuration file:

               sudo systemctl daemon-reload
              
            5. Start Reactor under systemd:

               sudo systemctl start reactor
              

            If you need to stop Reactor later, that's systemctl stop reactor. You can also restart a running Reactor with systemctl restart reactor.

            Running Reactor under systemd will automatically restart it if it crashes, and start it up automatically when your RPi boots up.

            M Offline
            M Offline
            Matteburk
            wrote on last edited by
            #10

            @toggledbits@
            Followed your instructions to run it under systemd but when i do nr 4 and 5 reactor won't start...
            Should I write sudo systemctl start reactor under pi@raspberrypi as in picture?

            /Mattias

            Skärmavbild 2021-09-04 kl. 10.39.40.png

            1 Reply Last reply
            0
            • toggledbitsT Offline
              toggledbitsT Offline
              toggledbits
              wrote on last edited by
              #11

              This is correct. Check /var/log/syslog for startup errors.

              Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

              1 Reply Last reply
              0
              • M Offline
                M Offline
                Matteburk
                wrote on last edited by
                #12

                This is what the log says:
                Sep 5 00:00:00 raspberrypi rsyslogd: [origin software="rsyslogd" swVersion="8.1901.0" x-pid="383" x-info="https://www.rsyslog.com"] rsyslogd was HUPed
                Sep 5 00:00:00 raspberrypi rsyslogd: [origin software="rsyslogd" swVersion="8.1901.0" x-pid="383" x-info="https://www.rsyslog.com"] rsyslogd was HUPed
                Sep 5 00:00:00 raspberrypi systemd[1]: logrotate.service: Succeeded.
                Sep 5 00:00:00 raspberrypi systemd[1]: Started Rotate log files.
                Sep 5 00:00:00 raspberrypi systemd[1]: man-db.service: Succeeded.
                Sep 5 00:00:00 raspberrypi systemd[1]: Started Daily man-db regeneration.
                Sep 5 00:00:02 raspberrypi colord[955]: failed to get session [pid 17774]: Inga data tillg\u00e4ngliga
                Sep 5 00:00:05 raspberrypi systemd[1]: reactor.service: Service RestartSec=5s expired, scheduling restart.
                Sep 5 00:00:05 raspberrypi systemd[1]: reactor.service: Scheduled restart job, restart counter is at 9474.
                Sep 5 00:00:05 raspberrypi systemd[1]: Stopped Multi System Reactor.
                Sep 5 00:00:05 raspberrypi systemd[1]: Started Multi System Reactor.
                Sep 5 00:00:05 raspberrypi systemd[17799]: reactor.service: Failed to determine user credentials: No such process
                Sep 5 00:00:05 raspberrypi systemd[17799]: reactor.service: Failed at step USER spawning /usr/local/lib/nodejs/bin/node: No such process
                Sep 5 00:00:05 raspberrypi systemd[1]: reactor.service: Main process exited, code=exited, status=217/USER
                Sep 5 00:00:05 raspberrypi systemd[1]: reactor.service: Failed with result 'exit-code'.
                Sep 5 00:00:10 raspberrypi systemd[1]: reactor.service: Service RestartSec=5s expired, scheduling restart.
                Sep 5 00:00:10 raspberrypi systemd[1]: reactor.service: Scheduled restart job, restart counter is at 9475.
                Sep 5 00:00:10 raspberrypi systemd[1]: Stopped Multi System Reactor.
                Sep 5 00:00:10 raspberrypi systemd[1]: Started Multi System Reactor.
                Sep 5 00:00:10 raspberrypi systemd[17800]: reactor.service: Failed to determine user credentials: No such process
                Sep 5 00:00:10 raspberrypi systemd[17800]: reactor.service: Failed at step USER spawning /usr/local/lib/nodejs/bin/node: No such process
                Sep 5 00:00:10 raspberrypi systemd[1]: reactor.service: Main process exited, code=exited, status=217/USER
                Sep 5 00:00:10 raspberrypi systemd[1]: reactor.service: Failed with result 'exit-code'.
                Sep 5 00:00:15 raspberrypi systemd[1]: reactor.service: Service RestartSec=5s expired, scheduling restart.
                Sep 5 00:00:15 raspberrypi systemd[1]: reactor.service: Scheduled restart job, restart counter is at 9476.
                Sep 5 00:00:15 raspberrypi systemd[1]: Stopped Multi System Reactor.
                Sep 5 00:00:15 raspberrypi systemd[1]: Started Multi System Reactor.
                Sep 5 00:00:15 raspberrypi systemd[17801]: reactor.service: Failed to determine user credentials: No such process
                Sep 5 00:00:15 raspberrypi systemd[17801]: reactor.service: Failed at step USER spawning /usr/local/lib/nodejs/bin/node: No such process
                Sep 5 00:00:15 raspberrypi systemd[1]: reactor.service: Main process exited, code=exited, status=217/USER
                Sep 5 00:00:15 raspberrypi systemd[1]: reactor.service: Failed with result 'exit-code'.
                Sep 5 00:00:21 raspberrypi systemd[1]: reactor.service: Service RestartSec=5s expired, scheduling restart.
                Sep 5 00:00:21 raspberrypi systemd[1]: reactor.service: Scheduled restart job, restart counter is at 9477.
                Sep 5 00:00:21 raspberrypi systemd[1]: Stopped Multi System Reactor.
                Sep 5 00:00:21 raspberrypi systemd[1]: Started Multi System Reactor.
                Sep 5 00:00:21 raspberrypi systemd[17802]: reactor.service: Failed to determine user credentials: No such process
                Sep 5 00:00:21 raspberrypi systemd[17802]: reactor.service: Failed at step USER spawning /usr/local/lib/nodejs/bin/node: No such process
                Sep 5 00:00:21 raspberrypi systemd[1]: reactor.service: Main process exited, code=exited, status=217/USER
                Sep 5 00:00:21 raspberrypi systemd[1]: reactor.service: Failed with result 'exit-code'.
                Sep 5 00:00:26 raspberrypi systemd[1]: reactor.service: Service RestartSec=5s expired, scheduling restart.
                Sep 5 00:00:26 raspberrypi systemd[1]: reactor.service: Scheduled restart job, restart counter is at 9478.

                1 Reply Last reply
                0
                • toggledbitsT Offline
                  toggledbitsT Offline
                  toggledbits
                  wrote on last edited by
                  #13

                  Looks like you haven't set the User= line correctly in the reactor.service file. It should be the name of the user that owns the directory in which Reactor is installed. While you are at it, check the pathname to the Reactor install (in the WorkingDirectory and Environment keys), and the pathname to the node executable used in the ExecStart key. If you're not sure where your node lives, just type which node on the command line and it will tell you.

                  Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                  1 Reply Last reply
                  0
                  • M Offline
                    M Offline
                    Matteburk
                    wrote on last edited by
                    #14

                    I checked and changed the lines to this ( I guess something is wrong there)
                    [Unit]
                    Description=Multi System Reactor
                    After=network.target

                    [Service]
                    Type=simple
                    User=pi
                    WorkingDirectory=/home/pi/reactor
                    Environment=NODE_PATH=/home/pi/reactor
                    ExecStart=/home/pi/.local/lib/nodejs/node-v14.15.4-linux-armv7l/bin/node

                    Restart=on-failure
                    RestartSec=5s

                    [Install]
                    WantedBy=multi-user.target

                    and restarted reactor....... then I see this in log.....

                    Sep 5 15:26:16 raspberrypi systemd[9870]: reactor.service: Failed to determine user credentials: No such process
                    Sep 5 15:26:16 raspberrypi systemd[9870]: reactor.service: Failed at step USER spawning /usr/local/lib/nodejs/bin/node: No such process
                    Sep 5 15:26:16 raspberrypi systemd[1]: reactor.service: Main process exited, code=exited, status=217/USER
                    Sep 5 15:26:16 raspberrypi systemd[1]: reactor.service: Failed with result 'exit-code'.
                    Sep 5 15:26:21 raspberrypi systemd[1]: reactor.service: Service RestartSec=5s expired, scheduling restart.
                    Sep 5 15:26:21 raspberrypi systemd[1]: reactor.service: Scheduled restart job, restart counter is at 20060.
                    Sep 5 15:26:21 raspberrypi systemd[1]: Stopped Multi System Reactor.
                    Sep 5 15:26:21 raspberrypi systemd[1]: Started Multi System Reactor.
                    Sep 5 15:26:21 raspberrypi systemd[9871]: reactor.service: Failed to determine user credentials: No such process
                    Sep 5 15:26:21 raspberrypi systemd[9871]: reactor.service: Failed at step USER spawning /usr/local/lib/nodejs/bin/node: No such process
                    Sep 5 15:26:21 raspberrypi systemd[1]: reactor.service: Main process exited, code=exited, status=217/USER
                    Sep 5 15:26:21 raspberrypi systemd[1]: reactor.service: Failed with result 'exit-code'.
                    Sep 5 15:26:22 raspberrypi systemd[1]: Reloading.
                    Sep 5 15:26:22 raspberrypi systemd[1]: /etc/systemd/system/teamviewerd.service:8: PIDFile= references path below legacy directory /var/run/, updating /var/run/teamviewerd.pid \u2192 /run/teamviewerd.pid; please update the unit file accordingly.
                    Sep 5 15:26:26 raspberrypi systemd[1]: reactor.service: Service RestartSec=5s expired, scheduling restart.
                    Sep 5 15:26:26 raspberrypi systemd[1]: reactor.service: Scheduled restart job, restart counter is at 20061.
                    Sep 5 15:26:26 raspberrypi systemd[1]: Stopped Multi System Reactor.
                    Sep 5 15:26:26 raspberrypi systemd[1]: Started Multi System Reactor.
                    Sep 5 15:26:27 raspberrypi systemd[1]: reactor.service: Succeeded.
                    Sep 5 15:26:42 raspberrypi systemd[1]: Started Multi System Reactor.
                    Sep 5 15:26:43 raspberrypi systemd[1]: reactor.service: Succeeded.
                    Sep 5 15:34:06 raspberrypi systemd[1]: Started Multi System Reactor.
                    Sep 5 15:34:06 raspberrypi systemd[1]: reactor.service: Succeeded.

                    1 Reply Last reply
                    0
                    • toggledbitsT Offline
                      toggledbitsT Offline
                      toggledbits
                      wrote on last edited by
                      #15

                      It looks like it's referring to a different pathname for nodejs than you have configured in the service file. Did you make a change to that value somewhere along the way? If you make any changes to the config file, you need to do sudo systemctl daemon-reload to get systemd to read the updated config file. So the first step is to try sudo systemctl daemon-reload followed by sudo systemctl restart reactor.

                      If that doesn't work, it is reported elsewhere that sudo systemctl daemon-reexec may resolve this (or perhaps simply rebooting the whole system).

                      Then step three, if you're still not successful, is to see if Reactor is logging anything in its own log files.

                      Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                      M 1 Reply Last reply
                      0
                      • toggledbitsT toggledbits

                        It looks like it's referring to a different pathname for nodejs than you have configured in the service file. Did you make a change to that value somewhere along the way? If you make any changes to the config file, you need to do sudo systemctl daemon-reload to get systemd to read the updated config file. So the first step is to try sudo systemctl daemon-reload followed by sudo systemctl restart reactor.

                        If that doesn't work, it is reported elsewhere that sudo systemctl daemon-reexec may resolve this (or perhaps simply rebooting the whole system).

                        Then step three, if you're still not successful, is to see if Reactor is logging anything in its own log files.

                        M Offline
                        M Offline
                        Matteburk
                        wrote on last edited by
                        #16

                        @toggledbits

                        I have followed your instructions but no success.

                        Dont no what to do..... Here is the log from msr
                        /Mattias

                        Require stack:

                        • /home/pi/reactor/server/lib/Engine.js
                        • /home/pi/reactor/server/lib/httpapi.js
                        • /home/pi/reactor/app.js
                          Error: Cannot find module 'common/util'
                          Require stack:
                        • /home/pi/reactor/server/lib/Engine.js
                        • /home/pi/reactor/server/lib/httpapi.js
                        • /home/pi/reactor/app.js
                          at Function.Module._resolveFilename (internal/modules/cjs/loader.js:880:15)
                          at Function.Module._load (internal/modules/cjs/loader.js:725:27)
                          at Module.require (internal/modules/cjs/loader.js:952:19)
                          at require (internal/modules/cjs/helpers.js:88:18)
                          at Engine._get_lexp_extensions (/home/pi/reactor/server/lib/Engine.js:862:25)
                          at Rule.evaluateExpressions (/home/pi/reactor/server/lib/Rule.js:904:330)
                          at Rule._evaluate (/home/pi/reactor/server/lib/Rule.js:994:344)
                          at runMicrotasks (<anonymous>)
                          at processTicksAndRejections (internal/process/task_queues.js:93:5)
                          at async /home/pi/reactor/server/lib/Rule.js:963:17
                          2021-09-06T16:19:30.352Z Rule:5:980:Rule.js Rule#rule-ksn5u2pn._evaluate() mutex acquired, evaluating
                          2021-09-06T16:19:30.352Z Rule:5:984:Rule.js Rule#rule-ksn5u2pn update rate is 0/min limit 60/min
                          2021-09-06T16:19:30.353Z Rule:5:904:Rule.js Rule#rule-ksn5u2pn evaluateExpressions() with 0 expressions
                          2021-09-06T16:19:30.354Z Rule:CRIT Error: Cannot find module 'common/util'
                          Require stack:
                        • /home/pi/reactor/server/lib/Engine.js
                        • /home/pi/reactor/server/lib/httpapi.js
                        • /home/pi/reactor/app.js
                          Error: Cannot find module 'common/util'
                          Require stack:
                        • /home/pi/reactor/server/lib/Engine.js
                        • /home/pi/reactor/server/lib/httpapi.js
                        • /home/pi/reactor/app.js
                          at Function.Module._resolveFilename (internal/modules/cjs/loader.js:880:15)
                          at Function.Module._load (internal/modules/cjs/loader.js:725:27)
                          at Module.require (internal/modules/cjs/loader.js:952:19)
                          at require (internal/modules/cjs/helpers.js:88:18)
                          at Engine._get_lexp_extensions (/home/pi/reactor/server/lib/Engine.js:862:25)
                          at Rule.evaluateExpressions (/home/pi/reactor/server/lib/Rule.js:904:330)
                          at Rule._evaluate (/home/pi/reactor/server/lib/Rule.js:994:344)
                          at runMicrotasks (<anonymous>)
                          at processTicksAndRejections (internal/process/task_queues.js:93:5)
                          at async /home/pi/reactor/server/lib/Rule.js:963:17
                          2021-09-06T16:19:30.356Z Rule:5:980:Rule.js Rule#rule-ksm11ihr._evaluate() mutex acquired, evaluating
                          2021-09-06T16:19:30.356Z Rule:5:984:Rule.js Rule#rule-ksm11ihr update rate is 0/min limit 60/min
                          2021-09-06T16:19:30.357Z Rule:5:904:Rule.js Rule#rule-ksm11ihr evaluateExpressions() with 0 expressions
                          2021-09-06T16:19:30.358Z Rule:CRIT Error: Cannot find module 'common/util'
                          Require stack:
                        • /home/pi/reactor/server/lib/Engine.js
                        • /home/pi/reactor/server/lib/httpapi.js
                        • /home/pi/reactor/app.js
                          Error: Cannot find module 'common/util'
                          Require stack:
                        • /home/pi/reactor/server/lib/Engine.js
                        • /home/pi/reactor/server/lib/httpapi.js
                        • /home/pi/reactor/app.js
                          at Function.Module._resolveFilename (internal/modules/cjs/loader.js:880:15)
                          at Function.Module._load (internal/modules/cjs/loader.js:725:27)
                          at Module.require (internal/modules/cjs/loader.js:952:19)
                          at require (internal/modules/cjs/helpers.js:88:18)
                          at Engine._get_lexp_extensions (/home/pi/reactor/server/lib/Engine.js:862:25)
                          at Rule.evaluateExpressions (/home/pi/reactor/server/lib/Rule.js:904:330)
                          at Rule._evaluate (/home/pi/reactor/server/lib/Rule.js:994:344)
                          at runMicrotasks (<anonymous>)
                          at processTicksAndRejections (internal/process/task_queues.js:93:5)
                          at async /home/pi/reactor/server/lib/Rule.js:963:17
                        CrilleC 1 Reply Last reply
                        0
                        • M Matteburk

                          @toggledbits

                          I have followed your instructions but no success.

                          Dont no what to do..... Here is the log from msr
                          /Mattias

                          Require stack:

                          • /home/pi/reactor/server/lib/Engine.js
                          • /home/pi/reactor/server/lib/httpapi.js
                          • /home/pi/reactor/app.js
                            Error: Cannot find module 'common/util'
                            Require stack:
                          • /home/pi/reactor/server/lib/Engine.js
                          • /home/pi/reactor/server/lib/httpapi.js
                          • /home/pi/reactor/app.js
                            at Function.Module._resolveFilename (internal/modules/cjs/loader.js:880:15)
                            at Function.Module._load (internal/modules/cjs/loader.js:725:27)
                            at Module.require (internal/modules/cjs/loader.js:952:19)
                            at require (internal/modules/cjs/helpers.js:88:18)
                            at Engine._get_lexp_extensions (/home/pi/reactor/server/lib/Engine.js:862:25)
                            at Rule.evaluateExpressions (/home/pi/reactor/server/lib/Rule.js:904:330)
                            at Rule._evaluate (/home/pi/reactor/server/lib/Rule.js:994:344)
                            at runMicrotasks (<anonymous>)
                            at processTicksAndRejections (internal/process/task_queues.js:93:5)
                            at async /home/pi/reactor/server/lib/Rule.js:963:17
                            2021-09-06T16:19:30.352Z Rule:5:980:Rule.js Rule#rule-ksn5u2pn._evaluate() mutex acquired, evaluating
                            2021-09-06T16:19:30.352Z Rule:5:984:Rule.js Rule#rule-ksn5u2pn update rate is 0/min limit 60/min
                            2021-09-06T16:19:30.353Z Rule:5:904:Rule.js Rule#rule-ksn5u2pn evaluateExpressions() with 0 expressions
                            2021-09-06T16:19:30.354Z Rule:CRIT Error: Cannot find module 'common/util'
                            Require stack:
                          • /home/pi/reactor/server/lib/Engine.js
                          • /home/pi/reactor/server/lib/httpapi.js
                          • /home/pi/reactor/app.js
                            Error: Cannot find module 'common/util'
                            Require stack:
                          • /home/pi/reactor/server/lib/Engine.js
                          • /home/pi/reactor/server/lib/httpapi.js
                          • /home/pi/reactor/app.js
                            at Function.Module._resolveFilename (internal/modules/cjs/loader.js:880:15)
                            at Function.Module._load (internal/modules/cjs/loader.js:725:27)
                            at Module.require (internal/modules/cjs/loader.js:952:19)
                            at require (internal/modules/cjs/helpers.js:88:18)
                            at Engine._get_lexp_extensions (/home/pi/reactor/server/lib/Engine.js:862:25)
                            at Rule.evaluateExpressions (/home/pi/reactor/server/lib/Rule.js:904:330)
                            at Rule._evaluate (/home/pi/reactor/server/lib/Rule.js:994:344)
                            at runMicrotasks (<anonymous>)
                            at processTicksAndRejections (internal/process/task_queues.js:93:5)
                            at async /home/pi/reactor/server/lib/Rule.js:963:17
                            2021-09-06T16:19:30.356Z Rule:5:980:Rule.js Rule#rule-ksm11ihr._evaluate() mutex acquired, evaluating
                            2021-09-06T16:19:30.356Z Rule:5:984:Rule.js Rule#rule-ksm11ihr update rate is 0/min limit 60/min
                            2021-09-06T16:19:30.357Z Rule:5:904:Rule.js Rule#rule-ksm11ihr evaluateExpressions() with 0 expressions
                            2021-09-06T16:19:30.358Z Rule:CRIT Error: Cannot find module 'common/util'
                            Require stack:
                          • /home/pi/reactor/server/lib/Engine.js
                          • /home/pi/reactor/server/lib/httpapi.js
                          • /home/pi/reactor/app.js
                            Error: Cannot find module 'common/util'
                            Require stack:
                          • /home/pi/reactor/server/lib/Engine.js
                          • /home/pi/reactor/server/lib/httpapi.js
                          • /home/pi/reactor/app.js
                            at Function.Module._resolveFilename (internal/modules/cjs/loader.js:880:15)
                            at Function.Module._load (internal/modules/cjs/loader.js:725:27)
                            at Module.require (internal/modules/cjs/loader.js:952:19)
                            at require (internal/modules/cjs/helpers.js:88:18)
                            at Engine._get_lexp_extensions (/home/pi/reactor/server/lib/Engine.js:862:25)
                            at Rule.evaluateExpressions (/home/pi/reactor/server/lib/Rule.js:904:330)
                            at Rule._evaluate (/home/pi/reactor/server/lib/Rule.js:994:344)
                            at runMicrotasks (<anonymous>)
                            at processTicksAndRejections (internal/process/task_queues.js:93:5)
                            at async /home/pi/reactor/server/lib/Rule.js:963:17
                          CrilleC Offline
                          CrilleC Offline
                          Crille
                          wrote on last edited by
                          #17

                          @matteburk Try installing 21200 just to see if you get MSR running again.

                          M 1 Reply Last reply
                          0
                          • toggledbitsT Offline
                            toggledbitsT Offline
                            toggledbits
                            wrote on last edited by toggledbits
                            #18

                            The messages in the log you posted indicate that NODE_PATH is incorrectly set, so I now cannot be sure if we're back at your original problem because you have tried to run it from the command line and this log is from that, or if this log is from an attempted systemd startup, which makes no sense because the service file you published earlier sets the environment variable correctly.

                            I've given you everything you need to get going again. I'm not sure what else to do. You need to figure it out, though, because this is how this and all future builds will be working, and right now, you're the only person I know of that isn't running, so I'm assuming its a local configuration issue and not a package/software issue.

                            Can you stop any local startup, start again with systemd, and post the startup portion of the log file? I don't want to see the error message again, I need to see all the messages from a Reactor startup under systemd. That will start with the string Reactor <version> starting on <nodejs version> and give me everything up to Startup complete.

                            Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                            M 2 Replies Last reply
                            0
                            • toggledbitsT toggledbits

                              The messages in the log you posted indicate that NODE_PATH is incorrectly set, so I now cannot be sure if we're back at your original problem because you have tried to run it from the command line and this log is from that, or if this log is from an attempted systemd startup, which makes no sense because the service file you published earlier sets the environment variable correctly.

                              I've given you everything you need to get going again. I'm not sure what else to do. You need to figure it out, though, because this is how this and all future builds will be working, and right now, you're the only person I know of that isn't running, so I'm assuming its a local configuration issue and not a package/software issue.

                              Can you stop any local startup, start again with systemd, and post the startup portion of the log file? I don't want to see the error message again, I need to see all the messages from a Reactor startup under systemd. That will start with the string Reactor <version> starting on <nodejs version> and give me everything up to Startup complete.

                              M Offline
                              M Offline
                              Matteburk
                              wrote on last edited by
                              #19

                              @toggledbits ok... yes for sure it is me setting something up wrong... will struggle some more... 🙂

                              1 Reply Last reply
                              0
                              • CrilleC Crille

                                @matteburk Try installing 21200 just to see if you get MSR running again.

                                M Offline
                                M Offline
                                Matteburk
                                wrote on last edited by
                                #20

                                @crille tried .....

                                1 Reply Last reply
                                0
                                • toggledbitsT toggledbits

                                  The messages in the log you posted indicate that NODE_PATH is incorrectly set, so I now cannot be sure if we're back at your original problem because you have tried to run it from the command line and this log is from that, or if this log is from an attempted systemd startup, which makes no sense because the service file you published earlier sets the environment variable correctly.

                                  I've given you everything you need to get going again. I'm not sure what else to do. You need to figure it out, though, because this is how this and all future builds will be working, and right now, you're the only person I know of that isn't running, so I'm assuming its a local configuration issue and not a package/software issue.

                                  Can you stop any local startup, start again with systemd, and post the startup portion of the log file? I don't want to see the error message again, I need to see all the messages from a Reactor startup under systemd. That will start with the string Reactor <version> starting on <nodejs version> and give me everything up to Startup complete.

                                  M Offline
                                  M Offline
                                  Matteburk
                                  wrote on last edited by Matteburk
                                  #21

                                  @toggledbits
                                  I dont see the string reactor version starting on XXXX as you wrote.

                                  From the var/log syslog I get this after stopped and started reactor via systemctl restart reactor

                                  Sep 6 20:58:49 raspberrypi systemd[1]: Started Multi System Reactor.
                                  Sep 6 20:58:50 raspberrypi systemd[1]: reactor.service: Succeeded.
                                  Sep 6 21:00:41 raspberrypi dbus-daemon[402]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.57' (uid=1000 pid=1071 comm="/usr/lib/chromium-browser/chromium-browser-v7 --fo")
                                  Sep 6 21:00:41 raspberrypi systemd[1]: Starting Hostname Service...
                                  Sep 6 21:00:41 raspberrypi dbus-daemon[402]: [system] Successfully activated service 'org.freedesktop.hostname1'
                                  Sep 6 21:00:41 raspberrypi systemd[1]: Started Hostname Service.

                                  1 Reply Last reply
                                  0
                                  • toggledbitsT Offline
                                    toggledbitsT Offline
                                    toggledbits
                                    wrote on last edited by
                                    #22

                                    In reactor.log

                                    Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                                    M 1 Reply Last reply
                                    0
                                    • toggledbitsT toggledbits

                                      In reactor.log

                                      M Offline
                                      M Offline
                                      Matteburk
                                      wrote on last edited by
                                      #23

                                      @toggledbits
                                      hmmm nothing is being logged there after stop ,start. the log file has not been updated since I tried node app.js for a couple of hours ago

                                      1 Reply Last reply
                                      0
                                      • toggledbitsT Offline
                                        toggledbitsT Offline
                                        toggledbits
                                        wrote on last edited by
                                        #24

                                        OK. Post that startup, then. It will tell me a few things as well.

                                        Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                                        1 Reply Last reply
                                        0
                                        • toggledbitsT Offline
                                          toggledbitsT Offline
                                          toggledbits
                                          wrote on last edited by toggledbits
                                          #25

                                          Wait, I'm really confused, you said "nothing is being logged there after stop ,start". Then where did the stuff you posted here come from?

                                          Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                                          M 2 Replies Last reply
                                          0
                                          Reply
                                          • Reply as topic
                                          Log in to reply
                                          • Oldest to Newest
                                          • Newest to Oldest
                                          • Most Votes


                                          Recent Topics

                                          • Gradually turn on lights.
                                            G
                                            gwp1
                                            0
                                            4
                                            69

                                          • Stop the MSR by an external switch on Hubitat.
                                            wmarcolinW
                                            wmarcolin
                                            0
                                            1
                                            8

                                          • Error After Upgrade
                                            G
                                            gwp1
                                            0
                                            4
                                            69

                                          • Reset attribute value of entity in event handler
                                            R
                                            RHCPNG
                                            0
                                            5
                                            142

                                          • Need help figuring out how to delay a reset on reaction
                                            G
                                            gwp1
                                            0
                                            22
                                            745

                                          • Way to search for rules (rule state) in other rules
                                            T
                                            tamorgen
                                            0
                                            3
                                            78

                                          • Links to MSR from HA
                                            Tom_DT
                                            Tom_D
                                            0
                                            1
                                            68

                                          • Set Reaction > Script Action
                                            wmarcolinW
                                            wmarcolin
                                            0
                                            11
                                            399

                                          • Wiring Samotech SM308-S into light fitting
                                            akbooerA
                                            akbooer
                                            0
                                            2
                                            128

                                          • Errors after updating to MQTTController build 25139
                                            toggledbitsT
                                            toggledbits
                                            0
                                            6
                                            230

                                          • 🎉 My very first MSR controller: OpenSprinkler
                                            therealdbT
                                            therealdb
                                            5
                                            13
                                            889

                                          • Advice reqeusted to migrate MSR from Bare Metal to Container
                                            T
                                            tamorgen
                                            0
                                            5
                                            234
                                          Powered by NodeBB | Contributors
                                          Hosted freely by 10RUPTiV - Solutions Technologiques | Contact us
                                          • Login

                                          • Don't have an account? Register

                                          • Login or register to search.
                                          • First post
                                            Last post
                                          0
                                          • Categories
                                          • Recent
                                          • Tags
                                          • Popular
                                          • Unsolved