wled.preset
-
I've done a bit of repackaging of MSR to make it work as an add-on under Home Assistant mostly for my own purposes but hopefully it makes it a bit easier to install and get going.
GitHub - mrw298/hassio-reactor-addon GitHub - mrw298/hassio-reactor-addon
Contribute to mrw298/hassio-reactor-addon development by creating an account on GitHub.
-
Hi Everyone,
I am just starting to move over from Vera to Home Assistant using MSR.
On vera I had been using DelayLight. I have tried to replicate it with help from youtube (https://www.youtube.com/watch?v=fc_ij0D1hXE) Reactor for Vera #006 - Emulating DelayLight in Reactor.
I have created 6 rules that sort of work. but I am just wondering if this is best practice or should can it be built in 1 rule like the old vera way?
-
Hi!
I tried to find an answer in both the forum and by myself, without any luck. I'm trying to make my Echo device play a mp3 file. The same mp3 file is easy to play with other smart speakers (Sonos, Google/Nest) - that it no problem. Same approch do not work with Echo devices. The mp3 files I want to use is located on my HA installation (config/www/audio), running on ver. 2023.5.4. I have MSR ver 23114.
Is there a way to do this easily?
Thanks!
/Fanan -
Build 21228 has been released. Docker images available from DockerHub as usual, and bare-metal packages here.
Home Assistant up to version 2021.8.6 supported; the online version of the manual will now state the current supported versions; Fix an error in OWMWeatherController that could cause it to stop updating; Unify the approach to entity filtering on all hub interface classes (controllers); this works for device entities only; it may be extended to other entities later; Improve error detail in messages for EzloController during auth phase; Add isRuleSet() and isRuleEnabled() functions to expressions extensions; Implement set action for lock and passage capabilities (makes them more easily scriptable in some cases); Fix a place in the UI where 24-hour time was not being displayed. -
I'm controlling a HVAC device through the MQTTController. While setting up the entity config in reactor.yaml, I started with this on the action block:
set_setpoint: topic: "ezlo_mqtt/set/item/%topic%/set/Tsetpoint" payload: expr: "parameters.setpoint" type: rawHowever, as the setpoint is a number in the UI, things were not fully parseable as a number and nothing was outputted to mqtt.
So I've added this code to MQTTController.js at line 1449 to add the payload type 'number':
} else if ( 'number' === act.payload.type ) { payload = String( payload ); } else if (''raw' !== ( act.payload.type || 'raw' ) ) {After this change, I was able to set the payload type to number:
set_setpoint: topic: "ezlo_mqtt/set/item/%topic%/set/Tsetpoint" payload: expr: "parameters.setpoint" type: numberAnd things worked as intended, being able to send numbers in the actions bit of a rule set.
-
-
I still use Vera controllers in combination with ReactorSensors. I have several Reactor sensors in use to retrieve weather data from Wunderground (i have a personal weather station), my smartmeter etc.
Recently I installed solar panels with a SolarEdge inverter. SolarEdge has an API to retrieve my power production data from their cloud.
Output is in json.So I created a new Reactor Sensor. Connection is working (query okay).
But I encounter problems at the Value Expressions. Either I get ""query okay" but no data or I get "query okay but 1 expressions failed"This is the json output
{"overview":{"lastUpdateTime":"2023-05-12 10:45:57","lifeTimeData":{"energy":476310.0,"revenue":216.577},"lastYearData":{"energy":433001.0},"lastMonthData":{"energy":433001.0},"lastDayData":{"energy":8262.0},"currentPower":{"power":5647.0},"measuredBy":"INVERTER"}}So it has different layers/levels.
I tried to put in the Value Expressions field several combinations to get the energy data of today (8262.0), like:
response.lastDayData.energy
response.overview.lastDayData.energy
response.overview.lastUpdateTime.lastDayData.energyall fail...
Who can help me with this ?
-
-
The wifi on my router is turned off, and wifi around the house is provided using a mesh - 3 units altogether (one connected directly to the router) that are spread around the house.
I would like to start automating certain tasks around the house and intend to try adding a few smart sockets to my setup.
The mesh system I have supports both 2.4GHz and 5GHz, and does not provide me with the option to control them - i.e. turn one or both on/off, give each a different SSID, etc.
The devices I wish to purchase/use only support 2.4GHz.
Will turning the mesh units off and temporarily turning the 2.4GHz wifi on the router to allow me to set them up be enough? Will I then be able to return to my usual setup and everything will work as it should?
Many thanks in advance
-
Hey everyone, I'm currently working on developing a bed sensor that can detect when you're out of bed. It could be used to trigger other smart home gadgets, like lights or blinds, temperature etc.
The sensors are placed under the legs of your bed post. Should look and feel like "smart furniture pads" with size 2 inches in diameter and 1/4 inch thick.
Before we go any further, I'd love to get your thoughts on this - would a bed sensor like this be something you'd find useful? We're still in the early stages of development, so any feedback you have would be greatly appreciated. Thanks in advance! -
Some background
switch (on/off) brightness color
I'm trying to integrate a Zigbee device into the MSR using zigbee2mqtt bridge and MQTTController. The device in question is a cheap mood light that has following properties that I'd like to control:I'v already managed to get the switch part working and can toggle the light on/off. Also the brightness value is mapped back to MSR. In zigbee2mqtt it has a value range from 0 to 254, so this the reason for the expression:
expr: 'payload.brightness / 254'Here's the entity definition (don't know whether the type should be something else than the Switch)
zigbee-lidl-mood-light: name: 'Lidl Mood Light' friendly_name: 'Mood Light' type: Switch uses_template: lidl-moodlightAnd the corresponding template (NOTE: rgb_color has not been defined in this example):
lidl-moodlight: init: "zigbee2mqtt/%friendly_name%/get/state" query: "zigbee2mqtt/%friendly_name%/get/state" capabilities: - power_switch - toggle - dimming primary_attribute: power_switch.state events: "zigbee2mqtt/%friendly_name%": "power_switch.state": json_payload: true expr: 'upper(payload.state) == "ON"' "dimming.level": json_payload: true expr: 'payload.brightness / 254' actions: power_switch: "on": topic: "zigbee2mqtt/%friendly_name%/set/state" payload: 'ON' "off": topic: "zigbee2mqtt/%friendly_name%/set/state" payload: 'OFF' set: topic: "zigbee2mqtt/%friendly_name%/set/state" payload: expr: "parameters.state ? 'ON' : 'OFF'" type: raw toggle: topic: "zigbee2mqtt/%friendly_name%/set/state" payload: 'TOGGLE'The problem
In order to control the brightness or the RGB color values, I would have send a JSON payload in corresponding actions. But I have no idea how to define it in the template. The reason why the switch part is working is that the zigbee2mqtt accepts also plain ON / OFF / TOGGLE string payloads in that case.But the brightness should be controlled with the following payload:
{"brightness": 196}And the RGB color like:
{"color":{"rgb":"46,102,150"}}Here's the link for the documentation (the Exposes part defines the messages).
So how should I define the JSON payload for example for the dimming action? It definitely should be some sort of expressions since I have to map the MSR real value (0...1) to (0...254) for the zigbee2mqtt.
actions: dimming: set: topic: "zigbee2mqtt/%friendly_name%/set" payload: expr: ????? type: jsonAnother problem is the RGB value. I could use the rgb_color capability for the setting but the problem is that the zigbee2mqtt only reports the current color in hue/saturation or xy coordinates.
Here's an example of published message after setting the color:
Topic: zigbee2mqtt/Mood Light QoS: 0 { "brightness":254, "color":{ "hue":240, "saturation":100, "x":0.1355, "y":0.0399 }, "color_mode":"xy", "color_temp":574, "linkquality":96, "state":"ON" }I would have to map those values back to RGB, but is it even possible with existing constructs in MQTTController's templates?
Help would be appreciated @toggledbits
br,
mgvra -
Good morning all,
I've got a stable Home Assistant running on a RPI 4 with a Aeotec Z-Stick 7 Plus, and of course the Z-wave JS integration. I've manually moved a handful of devices, and I'm overall much happier with the HA z-wave capability than I am with Vera. There are still some things I'm trying to figure out that I have in Vera that I'm not sure how they'll work in HA, but no deal breakers.I've got all of my automation on MSR and off of luup Reactor, so really the only thing left for me is to migrate my Z-wave network. I saw @rafale77's post about using a Zwave.me UZB1 to Zway, but of course that's not what I'm using.
Is there a similar method that I can use my Aeotec Z-Stick 7 plus to Home Assistant? I have around 70 Z-wave devices (give or take devices that generate multiple instances in Vera), so manual unpairing, including, etc, would be quite a chore.
-
Good evening,
I was wondering if it would be possible to send out a push notification when there is a update to MSR to HA users. I know how to set up notifications through Reactor to HA users, but I'm unsure what to look for in regards to updates. I know that MSR itself will tell me there is an update, but unless I'm logged into MSR in a browser, I'm not always going to see that.Just updated to latest-23114-e4060aae MSR
Home Assistant 2023.4.6
Supervisor 2023.04.1
Operating System 10.0 -
ChatGPT samples:
Me:
Tell me about an iot program called openLuup.
It:
OpenLuup is an open source home automation system that is built on the VeraLuup platform. It is designed to be easy to install and configure, and provides users with a powerful and versatile way to control their home automation devices. OpenLuup offers a wide range of features, including support for many popular home automation devices, scheduling, scripting, and integration with other services. OpenLuup is designed to be customizable, allowing users to create their own home automation systems. It is an excellent choice for those looking to create their own home automation system without spending a lot of money.
Me:
Write an iot program using openLuup.
It:
--openLuup IoT Program-- -- Initialize Variables -- local device_id = "MyHomeDevice" local temperature_sensor_id = "MyTemperatureSensor" local temperature_threshold = 75 -- Create Devices -- luup.create_device("OpenLuup Temperature Sensor", 0, device_id, "D_GenericSensor1.xml", "I_GenericSensor1.xml", "S_TemperatureSensor1.xml", "") luup.variable_set("urn:upnp-org:serviceId:TemperatureSensor1", "CurrentTemperature", 0, device_id) -- Start Timer -- luup.call_delay("check_temperature", 10, "", false) --Function to Check Temperature-- function check_temperature() local current_temperature = luup.variable_get(temperature_sensor_id, "CurrentTemperature", 0) --Check Temperature Threshold-- if current_temperature >= temperature_threshold then --Send Alert-- luup.call_action("urn:micasaverde-com:serviceId:HomeAutomationGateway1", "SendTextMessage", {PhoneNumber="1234567890", Message="ALERT! Temperature exceeded threshold!"}, 0) end --Reset Timer-- luup.call_delay("check_temperature", 10, "", false) endMe:
Write an iot program using openLuup.
It:
Write an iot program using openLuup. -- openLuup IOT Program -- -- Variables local lampState = false local lampTime = 0 -- Functions function lampTimer() if lampTime > 0 then lampTime = lampTime - 1 if lampTime == 0 then luup.variable_set('urn:upnp-org:serviceId:SwitchPower1', 'Status', 0, lampDeviceID) lampState = false end end end -- Setup luup.call_delay('lampTimer', 60, 0) -- Main Loop while true do -- Check for motion if luup.variable_get('urn:micasaverde-com:serviceId:MotionSensor1', 'Tripped', motionSensorDeviceID) == '1' then if not lampState then luup.variable_set('urn:upnp-org:serviceId:SwitchPower1', 'Status', 1, lampDeviceID) lampState = true -- Set lamp timer to 5 minutes lampTime = 300 end end luup.sleep(1) endWhat??
luup.sleep(1)Not good - looks like I still have some semblance of a job to fulfill.
Me:
An iot program called openLuup was written by akbooer. Who is akbooer?
It: (note: answer redacted and as I understand it, also incorrect re: AltUI):
akbooer is the pseudonym of the software developer and home automation enthusiast. He is the creator of the openLuup home automation software, which is an open-source version of the Vera home automation system. He is also the creator of the AltUI graphical user interface for openLuup.
Me:
Who created of the AltUI graphical user interface for openLuup.
and
Me:
Who created of the AltUI graphical user interface for the home automation system Vera.
Names two different people - mmmm.
Regardless very impressive - give it a few more years.
-
MSR tooltip says that "disabled groups are ignored, as if they did not exist (conditions don't run)".
Just want to clarify if it's by design that actions beneath disabled groups should run? They do run, but intuitively I was expecting them to be disabled as well.
Running the latest build under Docker.
-
Best posts made by Jaggz
-
RE: MSR and WLED Presets
Thanks. This worked perfectly and do appreciate the added context to understand why. Note: there was already a "local_hass_devices.yaml" file in my config with an entities header. Therefore, I just needed to enter the following 3 lines/entity information you noted below that heading and all was good.
Latest posts made by Jaggz
-
RE: WLED Automations require new Service with HA 2021.12
For those of you encountering the same issue, after further testing, I stumbled across the fact that the Entity Id that must be used now is "select_preset_wled" versus "light_wled" as was the case before HA 2021.12. When selected, the service drop down should only come up with "select.select_option" and the corresponding option field needs to be populated with the name of the preset you created in WLED (not the number). Note: if you have multiple WLED's set up, your selectable Entity ID list would contain: select_preset_wled, select_preset_wled_1, select_preset_wled_2 and so on...all referring to each of the WLED lights not the actual presets of that light. Hope that helps....
-
RE: WLED Automations require new Service with HA 2021.12
It was looking good in the sense that in MSR, with that change, the included Service was "select.select_option" and there was the option to specify the preset name but unfortunately, it would not fire/turn the WLED device on. As a check, I set up the same in HA automations and it worked.
-
WLED Automations require new Service with HA 2021.12
The introduction of HA 2021.12 came with a breaking change to WLED whereby the lights no longer have the Service "wled.preset" or "wled.effect". The wled.preset service specifically allowed for the selection of a preset (specific color, effect, light intensity, etc) which was manually set up in the WLED application to use in automations. In MSR, to gain access to the service "wled.preset", a manual workaround was implemented which required the creation of a text file called local_hass_devices.yaml which then needed to be placed in the config subdirectory with some scripting that told the HassController class that the specific entity mentioned supports the wled service. More detail can be found in the prior post "MSR and WLED Presets". In 2021.12, however, to set up an automation Home Assistant, you must now select "select.select_option" as the Service with the entity being the specific WLED and the option being the actual name of the preset (versus the preset number required in wled.preset). Is there a way to implement the same Service in Reactor as that Service is not being provided as an option currently. Breaking change notes in Home Assistant simply say "The wled.effect and wled.preset services have been removed. For both services, full replacements are available as normal entities in Home Assistant."
-
RE: Updated to latest MSR 21243 and no entities are being executed I Hubitat
Had the same issue. Reaction as a group would not fire but entities within the Reaction would when manually selecting them (hit the little play button next to them). Everything else looked normal from a Status perspective (i.e. motion detected sending the rule into green status, etc). I fixed the problem by installing a fresh copy (leaving the reactor-data folder untouched).
-
RE: MSR missing condition
Thanks Patrick and sorry for the duplicate. Should have searched the forums more thoroughly. I still have to contend with how to migrate the current Reactor in Vera being able to activate a Lua script I have set up unique to each group (i.e. Brian Home, Mary Home, etc) but I will look to figure that out. :). Btw...to my second question about changing the landing page...while not a big deal, is that possible?
-
MSR missing condition
I am finding that a key condition is missing for an entity in MSR that is available in Reactor (Vera). In the MSR screen shot, "updates" is missing from the list (should come right after "changes) whereas in Vera Reactor, it's there. Any ideas why it may be missing and/or how to get it back. It's a vital component of the automation.
And just a random question. Upon opening MSR, is there a way to set the landing page at "Status" versus "About"?
-
RE: MSR and WLED Presets
Thanks. This worked perfectly and do appreciate the added context to understand why. Note: there was already a "local_hass_devices.yaml" file in my config with an entities header. Therefore, I just needed to enter the following 3 lines/entity information you noted below that heading and all was good.
-
MSR and WLED Presets
Attempting to set up an automation that turns on one of my WLED lights running in Home Assistant to a specific "preset", defined in the WLED application. In HA automations, there is an option to input the specific preset number but that doesn't seem to be an option in MSR. Am I missing something or can this be added in a future release?