On Habitat it appears that the dimming level reports the last level regardless of the power state of the switch. It is the same in the Habitat device detail, Habitat Dashboard and the MSR entities list. It is the same with a Honeywell, Zooz and Virtual Dimmers.
-
Hi @toggledbits
Just a quick question. I noticed that I can't test a "set variable" action when the rule is not active. I wanted to set a global expression in a reaction and wanted to test it by pushing the "Run action now" button in the border of the reaction, but it didn't do anything. Only when I activated the rule, the button worked.
Is this a bug or is this by design?
I'm running the latest docker build:
latest-23114-e4060aae -
-
I've done a bit of repackaging of MSR to make it work as an add-on under Home Assistant mostly for my own purposes but hopefully it makes it a bit easier to install and get going.
GitHub - mrw298/hassio-reactor-addon GitHub - mrw298/hassio-reactor-addon
Contribute to mrw298/hassio-reactor-addon development by creating an account on GitHub.
-
Hi Everyone,
I am just starting to move over from Vera to Home Assistant using MSR.
On vera I had been using DelayLight. I have tried to replicate it with help from youtube (https://www.youtube.com/watch?v=fc_ij0D1hXE) Reactor for Vera #006 - Emulating DelayLight in Reactor.
I have created 6 rules that sort of work. but I am just wondering if this is best practice or should can it be built in 1 rule like the old vera way?
-
Hi!
I tried to find an answer in both the forum and by myself, without any luck. I'm trying to make my Echo device play a mp3 file. The same mp3 file is easy to play with other smart speakers (Sonos, Google/Nest) - that it no problem. Same approch do not work with Echo devices. The mp3 files I want to use is located on my HA installation (config/www/audio), running on ver. 2023.5.4. I have MSR ver 23114.
Is there a way to do this easily?
Thanks!
/Fanan -
Build 21228 has been released. Docker images available from DockerHub as usual, and bare-metal packages here.
Home Assistant up to version 2021.8.6 supported; the online version of the manual will now state the current supported versions; Fix an error in OWMWeatherController that could cause it to stop updating; Unify the approach to entity filtering on all hub interface classes (controllers); this works for device entities only; it may be extended to other entities later; Improve error detail in messages for EzloController during auth phase; Add isRuleSet() and isRuleEnabled() functions to expressions extensions; Implement set action for lock and passage capabilities (makes them more easily scriptable in some cases); Fix a place in the UI where 24-hour time was not being displayed. -
I'm controlling a HVAC device through the MQTTController. While setting up the entity config in reactor.yaml, I started with this on the action block:
set_setpoint: topic: "ezlo_mqtt/set/item/%topic%/set/Tsetpoint" payload: expr: "parameters.setpoint" type: rawHowever, as the setpoint is a number in the UI, things were not fully parseable as a number and nothing was outputted to mqtt.
So I've added this code to MQTTController.js at line 1449 to add the payload type 'number':
} else if ( 'number' === act.payload.type ) { payload = String( payload ); } else if (''raw' !== ( act.payload.type || 'raw' ) ) {After this change, I was able to set the payload type to number:
set_setpoint: topic: "ezlo_mqtt/set/item/%topic%/set/Tsetpoint" payload: expr: "parameters.setpoint" type: numberAnd things worked as intended, being able to send numbers in the actions bit of a rule set.
-
-
I still use Vera controllers in combination with ReactorSensors. I have several Reactor sensors in use to retrieve weather data from Wunderground (i have a personal weather station), my smartmeter etc.
Recently I installed solar panels with a SolarEdge inverter. SolarEdge has an API to retrieve my power production data from their cloud.
Output is in json.So I created a new Reactor Sensor. Connection is working (query okay).
But I encounter problems at the Value Expressions. Either I get ""query okay" but no data or I get "query okay but 1 expressions failed"This is the json output
{"overview":{"lastUpdateTime":"2023-05-12 10:45:57","lifeTimeData":{"energy":476310.0,"revenue":216.577},"lastYearData":{"energy":433001.0},"lastMonthData":{"energy":433001.0},"lastDayData":{"energy":8262.0},"currentPower":{"power":5647.0},"measuredBy":"INVERTER"}}So it has different layers/levels.
I tried to put in the Value Expressions field several combinations to get the energy data of today (8262.0), like:
response.lastDayData.energy
response.overview.lastDayData.energy
response.overview.lastUpdateTime.lastDayData.energyall fail...
Who can help me with this ?
-
-
The wifi on my router is turned off, and wifi around the house is provided using a mesh - 3 units altogether (one connected directly to the router) that are spread around the house.
I would like to start automating certain tasks around the house and intend to try adding a few smart sockets to my setup.
The mesh system I have supports both 2.4GHz and 5GHz, and does not provide me with the option to control them - i.e. turn one or both on/off, give each a different SSID, etc.
The devices I wish to purchase/use only support 2.4GHz.
Will turning the mesh units off and temporarily turning the 2.4GHz wifi on the router to allow me to set them up be enough? Will I then be able to return to my usual setup and everything will work as it should?
Many thanks in advance
-
Hey everyone, I'm currently working on developing a bed sensor that can detect when you're out of bed. It could be used to trigger other smart home gadgets, like lights or blinds, temperature etc.
The sensors are placed under the legs of your bed post. Should look and feel like "smart furniture pads" with size 2 inches in diameter and 1/4 inch thick.
Before we go any further, I'd love to get your thoughts on this - would a bed sensor like this be something you'd find useful? We're still in the early stages of development, so any feedback you have would be greatly appreciated. Thanks in advance! -
Some background
switch (on/off) brightness color
I'm trying to integrate a Zigbee device into the MSR using zigbee2mqtt bridge and MQTTController. The device in question is a cheap mood light that has following properties that I'd like to control:I'v already managed to get the switch part working and can toggle the light on/off. Also the brightness value is mapped back to MSR. In zigbee2mqtt it has a value range from 0 to 254, so this the reason for the expression:
expr: 'payload.brightness / 254'Here's the entity definition (don't know whether the type should be something else than the Switch)
zigbee-lidl-mood-light: name: 'Lidl Mood Light' friendly_name: 'Mood Light' type: Switch uses_template: lidl-moodlightAnd the corresponding template (NOTE: rgb_color has not been defined in this example):
lidl-moodlight: init: "zigbee2mqtt/%friendly_name%/get/state" query: "zigbee2mqtt/%friendly_name%/get/state" capabilities: - power_switch - toggle - dimming primary_attribute: power_switch.state events: "zigbee2mqtt/%friendly_name%": "power_switch.state": json_payload: true expr: 'upper(payload.state) == "ON"' "dimming.level": json_payload: true expr: 'payload.brightness / 254' actions: power_switch: "on": topic: "zigbee2mqtt/%friendly_name%/set/state" payload: 'ON' "off": topic: "zigbee2mqtt/%friendly_name%/set/state" payload: 'OFF' set: topic: "zigbee2mqtt/%friendly_name%/set/state" payload: expr: "parameters.state ? 'ON' : 'OFF'" type: raw toggle: topic: "zigbee2mqtt/%friendly_name%/set/state" payload: 'TOGGLE'The problem
In order to control the brightness or the RGB color values, I would have send a JSON payload in corresponding actions. But I have no idea how to define it in the template. The reason why the switch part is working is that the zigbee2mqtt accepts also plain ON / OFF / TOGGLE string payloads in that case.But the brightness should be controlled with the following payload:
{"brightness": 196}And the RGB color like:
{"color":{"rgb":"46,102,150"}}Here's the link for the documentation (the Exposes part defines the messages).
So how should I define the JSON payload for example for the dimming action? It definitely should be some sort of expressions since I have to map the MSR real value (0...1) to (0...254) for the zigbee2mqtt.
actions: dimming: set: topic: "zigbee2mqtt/%friendly_name%/set" payload: expr: ????? type: jsonAnother problem is the RGB value. I could use the rgb_color capability for the setting but the problem is that the zigbee2mqtt only reports the current color in hue/saturation or xy coordinates.
Here's an example of published message after setting the color:
Topic: zigbee2mqtt/Mood Light QoS: 0 { "brightness":254, "color":{ "hue":240, "saturation":100, "x":0.1355, "y":0.0399 }, "color_mode":"xy", "color_temp":574, "linkquality":96, "state":"ON" }I would have to map those values back to RGB, but is it even possible with existing constructs in MQTTController's templates?
Help would be appreciated @toggledbits
br,
mgvra -
Good morning all,
I've got a stable Home Assistant running on a RPI 4 with a Aeotec Z-Stick 7 Plus, and of course the Z-wave JS integration. I've manually moved a handful of devices, and I'm overall much happier with the HA z-wave capability than I am with Vera. There are still some things I'm trying to figure out that I have in Vera that I'm not sure how they'll work in HA, but no deal breakers.I've got all of my automation on MSR and off of luup Reactor, so really the only thing left for me is to migrate my Z-wave network. I saw @rafale77's post about using a Zwave.me UZB1 to Zway, but of course that's not what I'm using.
Is there a similar method that I can use my Aeotec Z-Stick 7 plus to Home Assistant? I have around 70 Z-wave devices (give or take devices that generate multiple instances in Vera), so manual unpairing, including, etc, would be quite a chore.
-
Good evening,
I was wondering if it would be possible to send out a push notification when there is a update to MSR to HA users. I know how to set up notifications through Reactor to HA users, but I'm unsure what to look for in regards to updates. I know that MSR itself will tell me there is an update, but unless I'm logged into MSR in a browser, I'm not always going to see that.Just updated to latest-23114-e4060aae MSR
Home Assistant 2023.4.6
Supervisor 2023.04.1
Operating System 10.0 -
ChatGPT samples:
Me:
Tell me about an iot program called openLuup.
It:
OpenLuup is an open source home automation system that is built on the VeraLuup platform. It is designed to be easy to install and configure, and provides users with a powerful and versatile way to control their home automation devices. OpenLuup offers a wide range of features, including support for many popular home automation devices, scheduling, scripting, and integration with other services. OpenLuup is designed to be customizable, allowing users to create their own home automation systems. It is an excellent choice for those looking to create their own home automation system without spending a lot of money.
Me:
Write an iot program using openLuup.
It:
--openLuup IoT Program-- -- Initialize Variables -- local device_id = "MyHomeDevice" local temperature_sensor_id = "MyTemperatureSensor" local temperature_threshold = 75 -- Create Devices -- luup.create_device("OpenLuup Temperature Sensor", 0, device_id, "D_GenericSensor1.xml", "I_GenericSensor1.xml", "S_TemperatureSensor1.xml", "") luup.variable_set("urn:upnp-org:serviceId:TemperatureSensor1", "CurrentTemperature", 0, device_id) -- Start Timer -- luup.call_delay("check_temperature", 10, "", false) --Function to Check Temperature-- function check_temperature() local current_temperature = luup.variable_get(temperature_sensor_id, "CurrentTemperature", 0) --Check Temperature Threshold-- if current_temperature >= temperature_threshold then --Send Alert-- luup.call_action("urn:micasaverde-com:serviceId:HomeAutomationGateway1", "SendTextMessage", {PhoneNumber="1234567890", Message="ALERT! Temperature exceeded threshold!"}, 0) end --Reset Timer-- luup.call_delay("check_temperature", 10, "", false) endMe:
Write an iot program using openLuup.
It:
Write an iot program using openLuup. -- openLuup IOT Program -- -- Variables local lampState = false local lampTime = 0 -- Functions function lampTimer() if lampTime > 0 then lampTime = lampTime - 1 if lampTime == 0 then luup.variable_set('urn:upnp-org:serviceId:SwitchPower1', 'Status', 0, lampDeviceID) lampState = false end end end -- Setup luup.call_delay('lampTimer', 60, 0) -- Main Loop while true do -- Check for motion if luup.variable_get('urn:micasaverde-com:serviceId:MotionSensor1', 'Tripped', motionSensorDeviceID) == '1' then if not lampState then luup.variable_set('urn:upnp-org:serviceId:SwitchPower1', 'Status', 1, lampDeviceID) lampState = true -- Set lamp timer to 5 minutes lampTime = 300 end end luup.sleep(1) endWhat??
luup.sleep(1)Not good - looks like I still have some semblance of a job to fulfill.
Me:
An iot program called openLuup was written by akbooer. Who is akbooer?
It: (note: answer redacted and as I understand it, also incorrect re: AltUI):
akbooer is the pseudonym of the software developer and home automation enthusiast. He is the creator of the openLuup home automation software, which is an open-source version of the Vera home automation system. He is also the creator of the AltUI graphical user interface for openLuup.
Me:
Who created of the AltUI graphical user interface for openLuup.
and
Me:
Who created of the AltUI graphical user interface for the home automation system Vera.
Names two different people - mmmm.
Regardless very impressive - give it a few more years.
-
MSR tooltip says that "disabled groups are ignored, as if they did not exist (conditions don't run)".
Just want to clarify if it's by design that actions beneath disabled groups should run? They do run, but intuitively I was expecting them to be disabled as well.
Running the latest build under Docker.
-
Best posts made by SweetGenius
-
RE: Hubitat dimmer vs Vera dimmer in MSR
-
RE: Mosquitto and Owntracks
@catmanv2 I am no expert but try this:
Change user: to username: Also, I believe both username: and password: should be the same indenting as source. -
RE: openLuup Install errors
Just checking. Tried the procedure twice with a clean SD card image both times a day apart.
Thanks for the input. -
RE: Low-priority GUI feedback
You are correct. That is what I wanted, Just not smart enough to try drag and drop. That works perfectly.
Thanks -
RE: Docker container for Z-Way
@librasun
I, being a Noob with docker, used PerH's image with a run command on my Synology. It runs and I can see the UZB dongle from the interface but I haven't added any devices yet. There are a couple of things that I do not think are quite right though. Read the the thread "z-way-server new release" I posted those issues there. Also search the Zwave.me forum for "Docker" and PerH posted a docker file and compose file but the version is not right for the compose file with the Docker version on the Synology, that is why I used a run command. -
RE: Mosquitto and Owntracks
@catmanv2 said in Mosquitto and Owntracks:
Does the indenting really matter?
Yes, indenting matters, like @therealdb said previously.
Is port 8883 the correct port for your setup? -
RE: Version 1.0 Pre-release Discussion
@toggledbits , As you stated in another thread "Capabilities on Hubitat are free-form, and there's no indication which capability might be the most useful or primary". Could you add the ability for a user to manually select the primary capability for each Hubitat device? This would allow the Entities screen to display info in the primary value. If the Dashboard feature is added in the future then the Hubitat device should display correctly there also.( I also would like to request the dashboard)
-
RE: Version 1.0 Pre-release Discussion
Would a Menu item for accessing the reactor log file or portion of the log be possible.Or ideally a way to monitor the log in real time from the GUI for troubleshooting?
-
RE: Critical Error after update
I pulled a new Docker image and it appears to have fixed the issue. Thank You.
-
RE: Hubitat primary attribute
@toggledbits Confirming Build 21292 fixed the issue. Thank You
Latest posts made by SweetGenius
-
RE: Home Assistant push notification for Reactor version update possible?
@tamorgen If I understand what you are asking correctly, Look under the reactor_system for reactor_system.update_available=true and use that as a rule trigger to send a notification.
-
RE: [Solved] Hubitat Hub Information Driver v3 and probe device
Installation of Reactor build 23049 and configuring a virtual switch as a probe device appears to be working well.
FYI, The "Manual" link in the Reactor UI doesn't have the updated docs that are linked to in the Release notes thread. Hubitat Controller, Other Configuration, probe_device section. I have tried a hard reset in safari and Firefox browsers but the documentation is not the updated instructions. Thank You.
Synology Docker
latest-23049 -
RE: [Solved] Hubitat Hub Information Driver v3 and probe device
With all due respect and I do mean that and without beating this to death, I am only seeing the attributes that update when MSR probes are the baseData attributes witch per the Hub information driver’s documentation are (attributes: firmwareVersionString, hardwareID, id, latitude, localIP, localSrvPortTCP, locationId, locationName, longitude, name, temperatureScale, timeZone, type, uptime, zigbeeChannel, zigbeeEui, zigbeeId, zigbeeStatus, zipCode). I can find these attributes updating in the logs every time. Some examples of attributes that are not updating are publicIP and hubUpdateVersion among others. I use those attributes in rules and they do not update. I can not find evidence of these being updated in the logs or driver unless you set the poll time for these to very fast interval as I tried to document in the previous post. I do believe the next scheduled poll time is accurate and the attributes associated with the polls will not update until that time. Probably the best thing to do is to revert to the v2 driver.
-
RE: [Solved] Hubitat Hub Information Driver v3 and probe device
It looks like when MSR probes the device, it then resets the next scheduled poll times to the time of the probe + whatever time you have set to poll in the device preferences. If you have small poll times then the polls might fire between MSR polls. Here is the filtered Hubitat log showing which polls run. lastPoll: baseData is when MSR does the probe. The first part of the log is with the poll:1 time is set at 9 minutes. If the time elapsed since a MSR probe > than 9 minutes then the poll:1 will run. It ran once at 06:45:15. I then changed the poll1 time from 9 mins to 3 mins at 8:00pm to test. You can see it ran more often but I don't know why the baseData slowed way down also.
dev:4812023-02-13 08:39:50.352 PMinfolastPoll : baseData dev:4812023-02-13 08:37:48.478 PMinfolastPoll : poll1 dev:4812023-02-13 08:34:48.349 PMinfolastPoll : poll1 dev:4812023-02-13 08:31:48.207 PMinfolastPoll : poll1 dev:4812023-02-13 08:28:48.062 PMinfolastPoll : poll1 dev:4812023-02-13 08:25:48.076 PMinfolastPoll : baseData dev:4812023-02-13 08:23:46.117 PMinfolastPoll : poll1 dev:4812023-02-13 08:20:45.974 PMinfolastPoll : poll1 dev:4812023-02-13 08:17:45.811 PMinfolastPoll : poll1 dev:4812023-02-13 08:14:45.676 PMinfolastPoll : poll1 dev:4812023-02-13 08:11:45.509 PMinfolastPoll : poll1 dev:4812023-02-13 08:08:45.408 PMinfolastPoll : poll1 dev:4812023-02-13 08:05:45.460 PMinfolastPoll : baseData dev:4812023-02-13 08:03:43.698 PMinfolastPoll : poll1 dev:4812023-02-13 08:00:43.644 PMinfolastPoll : baseData dev:4812023-02-13 07:56:18.977 PMinfolastPoll : baseData dev:4812023-02-13 07:54:17.207 PMinfolastPoll : baseData dev:4812023-02-13 07:50:52.589 PMinfolastPoll : baseData dev:4812023-02-13 07:44:17.322 PMinfolastPoll : baseData dev:4812023-02-13 07:39:17.057 PMinfolastPoll : baseData dev:4812023-02-13 07:36:18.474 PMinfolastPoll : baseData dev:4812023-02-13 07:34:16.720 PMinfolastPoll : baseData dev:4812023-02-13 07:26:27.444 PMinfolastPoll : baseData dev:4812023-02-13 07:24:16.188 PMinfolastPoll : baseData dev:4812023-02-13 07:21:27.225 PMinfolastPoll : baseData dev:4812023-02-13 07:14:58.542 PMinfolastPoll : baseData dev:4812023-02-13 07:09:15.465 PMinfolastPoll : baseData dev:4812023-02-13 07:04:15.275 PMinfolastPoll : baseData dev:4812023-02-13 07:01:16.758 PMinfolastPoll : baseData dev:4812023-02-13 06:59:14.981 PMinfolastPoll : baseData dev:4812023-02-13 06:54:14.847 PMinfolastPoll : baseData dev:4812023-02-13 06:45:15.886 PMinfolastPoll : poll1 dev:4812023-02-13 06:36:15.792 PMinfolastPoll : baseData dev:4812023-02-13 06:34:14.031 PMinfolastPoll : baseData dev:4812023-02-13 06:29:52.364 PMinfolastPoll : baseData dev:4812023-02-13 06:26:15.479 PMinfolastPoll : baseData dev:4812023-02-13 06:24:13.706 PMinfolastPoll : baseData dev:4812023-02-13 06:19:41.211 PMinfolastPoll : poll1
I am not looking for an immediate fix or change, Just trying to communicate to you what I am seeing.
Would it be an option to write your own virtual device driver for Hubitat so you could probe that device and return the data you want for the health check?
-
RE: [Solved] Hubitat Hub Information Driver v3 and probe device
I am running the latest version of the driver: v3.0.14.
It appears to me when MSR probes the device or if you press configure in the driver, all the new scheduled poll times increase causing them never to run. I have my poll times set as follows: poll1: 9 mins, poll2: 119 mins, poll3: 241 mins, poll4: 12 hours.
Here is a screenshot showing the scheduled poll times to start:
After MSR polls the scheduled poll times:
Poll3 and poll2 are not running.
Here is what I'm polling in the driver.
I know this is not your driver but I'm encouraged if you are not seeing a problem. I must have something configured wrong. Would you mind checking your driver and see if your scheduled times increase also?
-
[Solved] Hubitat Hub Information Driver v3 and probe device
I have upgraded my Hubitat Hub Information Driver to v3 and after the latest MSR update latest-23028 MSR is working ok. The problem is when MSR probes the device it appears to affect the polling in the new Hub Information Device and its data does not update the data fields in Hubitat. If I remove the Hub Information Device from Maker API so MSR can't see it, The Hub information driver updates the data as expected in Hubitat. I added the device back into Maker API the same problem returns in Hubitat. I have tried to have MSR probe a different device by adding a different probe device and probe action in the reactor.yaml per the documentation but it appears then it still uses the Hub Information Device as the probe device instead of the one specified in the reactor.yaml. See Logs below. Is this the intended behavior to always use the Hub Information Driver if found and not use the device in the reactor.yaml file? Any recommendations on how to get MSR and the v3 of the driver to work correctly or can you see what I am doing wrong?
[latest-23028]2023-02-11T23:27:50.471Z <Controller:NOTICE> Controller HassController#hass is now online. [latest-23028]2023-02-11T23:27:50.471Z <Rule:INFO> Internet Check (rule-l44qss4f in Home) starting evaluation; because entity-changed System#reactor_system>system [latest-23028]2023-02-11T23:27:50.471Z <Rule:INFO> MSR Update Version Available (rule-labweim2 in Notify) starting evaluation; because entity-changed System#reactor_system>system [latest-23028]2023-02-11T23:27:50.472Z <Rule:INFO> Internet Check (rule-l44qss4f in Home) trigger evaluation result is false (previously false) [latest-23028]2023-02-11T23:27:50.472Z <Rule:INFO> Internet Check (rule-l44qss4f in Home) evaluated; trigger state unchanged (false); rule state remains RESET [latest-23028]2023-02-11T23:27:50.472Z <Rule:INFO> MSR Update Version Available (rule-labweim2 in Notify) trigger evaluation result is false (previously false) [latest-23028]2023-02-11T23:27:50.472Z <Rule:INFO> MSR Update Version Available (rule-labweim2 in Notify) evaluated; trigger state unchanged (false); rule state remains RESET [latest-23028]2023-02-11T23:27:50.472Z <Rule:INFO> Internet Check (rule-l44qss4f in Home) evaluation complete [latest-23028]2023-02-11T23:27:50.472Z <Rule:INFO> MSR Update Version Available (rule-labweim2 in Notify) evaluation complete [latest-23028]2023-02-11T23:27:50.673Z <HubitatController:INFO> HubitatController#hubitat Maker API responded with 91 devices [latest-23028]2023-02-11T23:27:50.766Z <HubitatController:INFO> HubitatController#hubitat found 'Hub Information Driver v3' device #"481"; using for probe/health checks. [latest-23028]2023-02-11T23:27:50.780Z <Controller:INFO> HubitatController#hubitat 0 dead entities older than 86400000s purged [latest-23028]2023-02-11T23:27:50.780Z <Rule:INFO> Roku Pause (rule-l3nlrzu9 in Home) starting evaluation; because entity-changed BinarySensor#hubitat>519 [latest-23028]2023-02-11T23:27:50.780Z <Rule:INFO> Stairs Light Low Light (rule-kulslls9 in Living Room) starting evaluation; because entity-changed BinarySensor#hubitat>519 [latest-23028]2023-02-11T23:27:50.780Z <Rule:INFO> Porch Motion Extended check (rule-l3kr45m8 in Porch) starting evaluation; because entity-changed BinarySensor#hubitat>519 [latest-23028]2023-02-11T23:27:50.780Z <Rule:INFO> Porch Light Manual On (rule-kmtxw155 in Porch) starting evaluation; because entity-changed BinarySensor#hubitat>519
Snippet from the reactor.yaml:
# action_pace: 100 # warn_unresponsive: true # probe_device: hubitat>132 (not needed if Hub Information app installed) probe_device: hubitat>2 # probe_action: x_hubitat_Configuration.configure (not needed if Hub Information app installed) probe_action: x_hubitat_Configuration.configure # probe_action: x_hubitat_Refresh.refresh
Synology Docker latest-23028
Hubitat v2.3.4.139
Hub Information Driver v3 -
RE: [Resolved] Determining if button is pushed
@3rdStng I do not have the same device but I had to overcome this with my minimotes. Have you tried to set the x_hubitat_pushableButton.push back to 0 after your intended reaction. I cannot post images either for some reason or I would post an image of my Rule.
-
RE: Quality of Life Request: Update Button
I personally do not think the update process on Synology docker is that bad. A few more clicks than an easy button but not horrible. All my other docker containers are updated the same way. I like the docker image though. I am not familiar with the other platforms so I can’t comment on those update processes.
-
Extras Filename/versions do not match
In the download/extras folder, there appears to be new versions but after installing them the versions do not match file version.
Installed MQTTController-22291 => Logs report version 22284
Installed NUTTController-22291 => Logs report version 22283
Installed ZwaveJSController-22291 => Logs report version 22283The CHANGELOG.MD file in the archives shows the log reported version not 22291.
Is this intended ? Just wanted to make sure I have the latest versions.
ThanksSynology Docker latest-22293
-
RE: Deleting widgets
@tunnus Drag the widget off to the left side and it will disappear.