Skip to content
  • Categories
  • Recent
  • Tags
  • Popular
  • Unsolved
Collapse
Discussion Forum to share and further the development of home control and automation, independent of platforms.
  1. Home
  2. Software
  3. Multi-System Reactor
  4. Can't customize home page
DynamicGroupController and attributes
therealdbT
Hey @toggledbits I'm back to trying to optimize a couple of things based on dynamic group. First of all, I think I found a typo in the doc: primary_attribute: "binary_sensor.state" primary_attribute_value: | d = false; each id in members: d = getEntity(id)?.attributes?.power_switch?.state or d, d I think the correct code snippet is d = false, All that said, my use case for dynamic groups is to group 3 different climate devices, so I could easily command them at the same time. Commands are good, but sometimes I want to check if any of the devices are on, and that's easily done with a similar snippet as the one you have in the docs. But this is limited to the primary attribute, while I want to have any of the attributes in the group to be driven by a similar logic (while all are null in the group). ie, access hvac_control.mode and see if any of the unit is set to cool, or heat. Is that possible, without re-defining an expression in each of my rules? Thanks!
Multi-System Reactor
Bail out of failed reaction?
T
Topic thumbnail image
Multi-System Reactor
Arming Envisalink panel from MSR
T
Topic thumbnail image
Multi-System Reactor
[Solved] DynamicGroupController updating members issue
CrilleC
Edit: Solved in latest-26221. Bare-metal latest-26193 I have this group: "OKforLarm": name: OK för Larm select: - include_controller: vera - include_capability: door_sensor filter_expression: entity.attributes.door_sensor.state It contains the entities I expect but behaves a bit odd. When I open vera>device_10097 the entity attribute door_sensor.state changes to true but it won't show up as member in the group, when I also open vera>device_10095 they both shows as members and when I close vera>device_10095 it disappear from the group but when I close vera>device_10097 it lingers in the group until I restart Reactor.
Multi-System Reactor
Reactor (Multi-System/Multi-Hub) Announcements
toggledbitsT
Build 21228 has been released. Docker images available from DockerHub as usual, and bare-metal packages here. Home Assistant up to version 2021.8.6 supported; the online version of the manual will now state the current supported versions; Fix an error in OWMWeatherController that could cause it to stop updating; Unify the approach to entity filtering on all hub interface classes (controllers); this works for device entities only; it may be extended to other entities later; Improve error detail in messages for EzloController during auth phase; Add isRuleSet() and isRuleEnabled() functions to expressions extensions; Implement set action for lock and passage capabilities (makes them more easily scriptable in some cases); Fix a place in the UI where 24-hour time was not being displayed.
Multi-System Reactor
Upgrade Issues
T
Topic thumbnail image
Multi-System Reactor
[SOLVED] Conflicting Set Reaction Groups Appear to Fire Simultaneously in Single Rule Evaluation
G
Topic thumbnail image
Multi-System Reactor
[SOLVED] Question regarding "in" vs "contains" vs contents of the string
G
Topic thumbnail image
Multi-System Reactor
Logon screen timeout
G
Noticing since 170 that the lock screen doesn't switch to the logon prompt but, rather, stays on the active UI until such time as you go to click something within it. Then it jumps to the login screen. Brave browser Brave 1.92.139 (Official Build) (arm64) Chromium: 150.0.7871.114
Multi-System Reactor
[MSR] Copy&past of actions and/or drag&drop between set/reset
therealdbT
Hey @toggledbits One thing that bothers me while doing work on new systems/new features, is that I cannot copy&paste actions, and I cannot drag&drop between set and resets. #1 is for when I want to copy an action between different rules opened in two separate browser windows, while #2 is when I just need to flip a bunch of actions in the reset, or move some logic back and forth. Both will be appreciated, but I understand the technical challenges. Thanks!
Multi-System Reactor
Upgrade advice - upgrade from aarch64 to ARM64 image
T
I'm currently on version 26011. I understand that the aarch64 image is no longer supported. So, I therefore need to update to the ARM64 image. Can anyone possibly suggest how I update my docker compose.yaml file (see below). Ideally I'd like to keep my existing reactions etc. rather than start from scratch. # Multi-System Reactor template docker-compose.yml (version 22160) # # Change the lines indicated by "DO"... # services: reactor: container_name: reactor environment: # DO change the TZ: line to set your local time zone. # See valid TZ list: https://en.wikipedia.org/wiki/List_of_tz_database_time_zones TZ: GB # # DO NOT change this path. Your directory location is in "source" below. REACTOR_DATA_PREFIX: /var/reactor # DO change the image below to the one you are using (e.g. armv7l or aarch64 for RPi 4) image: toggledbits/reactor:latest-aarch64 restart: "always" expose: - 8111 ports: - 8111:8111 volumes: # DO change the /home/username/reactor below to the directory you created for # your local data; DO NOT change the /var/reactor part - /home/pi/docker/reactor:/var/reactor - /etc/localtime:/etc/localtime:ro tmpfs: /tmp
Multi-System Reactor
Alexa for MSR, any interest?
MikeReadingtonM
Topic thumbnail image
Multi-System Reactor
[RESOLVED] Telegram notification broke with latest update
3
Topic thumbnail image
Multi-System Reactor
[RESOLVED] Phantom device, “INFO” appears
wmarcolinW
Topic thumbnail image
Multi-System Reactor
[RESOLVED] Mode Status NULL
wmarcolinW
Topic thumbnail image
Multi-System Reactor
[RESOLVED] HTTP query failing after version 26177
wmarcolinW
Topic thumbnail image
Multi-System Reactor
Question about the find function
wmarcolinW
Topic thumbnail image
Multi-System Reactor
[Answered] OK to remove old json files?
3
Topic thumbnail image
Multi-System Reactor
Deprecation Announcement: 32-bit ARM *docker* images
toggledbitsT
If you are using the armv7l docker image, the OpenJS Foundation that publishes node is no longer producing 32-bit builds as of v24. That means the last supported LTS version of node for armv7l is v22, which will go End-of-Life in May 2027. Therefore, the Reactor armv7l image is now deprecated and will only be produced until node v22 goes EOL, and I will not publish armv7l images beyond that date. If you are running an RPi 3 or earlier with Reactor, you are on this image, and will need to upgrade hardware to a 64-bit model and use the arm64 image. If you need help getting it done, ask in this category.
Multi-System Reactor
[Solved] build 26150 - engine not starting
G
@toggledbits I pulled the image (well, Watchtower did) and within minutes the whole system went offline. The log looks like it ends with 26143. [latest-26143]2026-05-31T15:23:44.547Z <default:INFO> Closing container Container#Predicate#rule-mkahsmgf/26qq82mw-cons [latest-26143]2026-05-31T15:23:44.547Z <default:INFO> Closing container Container#Predicate#rule-lqyfljfi/22f8on0t-cons [latest-26143]2026-05-31T15:23:44.547Z <default:INFO> Closing container Container#Predicate#rule-lsb61rw8/24oenqi2-cons [latest-26143]2026-05-31T15:23:44.547Z <default:INFO> Closing container Container#Predicate#rule-lrh58he0/rule-lrh58he0:S-1c00gfib-cons [latest-26143]2026-05-31T15:23:44.547Z <default:INFO> Closing container Container#Predicate#rule-lrh58he0/1c00dylr-cons [latest-26143]2026-05-31T15:23:44.547Z <default:INFO> Closing container Container#Predicate#rule-lrh58he0/1nam9w5u-cons [latest-26143]2026-05-31T15:23:44.547Z <default:INFO> Closing container Container#Predicate#rule-miuh2qqi/22ls4lql-cons [latest-26143]2026-05-31T15:23:44.547Z <default:INFO> Closing container Container#Predicate#rule-kwc6rmci/rule-kwc6rmci:S-1vj8sdfc-cons [latest-26143]2026-05-31T15:23:44.547Z <default:INFO> Closing container Container#Predicate#rule-kwc6rmci/rule-kwc6rmci:S-1qanz01x-cons [latest-26143]2026-05-31T15:23:44.547Z <default:INFO> Closing container Container#Predicate#rule-ladyja6a/24lq19p6-cons [latest-26143]2026-05-31T15:23:44.547Z <default:INFO> Closing container Container#Predicate#rule-mk0o8iox/23oy468y-cons [latest-26143]2026-05-31T15:23:44.547Z <default:INFO> Closing container Container#Predicate#rule-miscg2h3/rule-miscg2h3:S-22gmbq1c-cons [latest-26143]2026-05-31T15:23:44.547Z <default:INFO> Closing container Container#Predicate#re-kxgrfjke/238p0old-cons [latest-26143]2026-05-31T15:23:44.547Z <default:INFO> Closing container Container#Predicate#re-m7ccsso5/re-m7ccsso5-1r0myjxa-cons [latest-26143]2026-05-31T15:23:44.547Z <default:INFO> Closing container Container#Predicate#rule-ladyja6a/19nl9wq2-cons [latest-26143]2026-05-31T15:23:44.547Z <default:INFO> Closing container Container#Predicate#rule-ladyja6a/rule-ladyja6a:S-yl3xk9t-cons [latest-26143]2026-05-31T15:23:44.547Z <default:INFO> Closing container Container#Predicate#rule-ladyja6a/rule-ladyja6a:S-yl3vv5m-cons [latest-26143]2026-05-31T15:23:44.547Z <default:INFO> Closing container Container#Predicate#re-ln7j2nqp/re-ln7j2nqp-22mx9lzd-cons [latest-26143]2026-05-31T15:23:44.547Z <default:INFO> Closing container Container#Predicate#re-ln7j2nqp/22mx87c8-cons [latest-26143]2026-05-31T15:23:44.547Z <default:INFO> Closing container Container#Predicate#rule-licneppy/1mzwe7ht-cons [latest-26143]2026-05-31T15:23:44.547Z <default:INFO> Closing container Container#Predicate#rule-ml3194ih/25jqt1j4-cons [latest-26143]2026-05-31T15:23:44.547Z <default:INFO> Closing container Container#Predicate#re-kxgrg7kf/227hshak-cons [latest-26143]2026-05-31T15:23:44.547Z <default:INFO> Closing container Container#Predicate#rule-reactorexmachina/13ua1p95-cons [latest-26143]2026-05-31T15:23:44.547Z <default:INFO> Closing container Container#Predicate#rule-reactorexmachina/13uagam7-cons [latest-26143]2026-05-31T15:23:44.547Z <default:INFO> Closing container Container#Predicate#rule-grpvl9oypg/rule-grpvl9oypg:R-134x4cbv-cons [latest-26143]2026-05-31T15:23:44.547Z <default:INFO> Closing container Container#Predicate#rule-grpvl9oypg/rule-grpvl9oypg:R-134x2fyl-cons [latest-26143]2026-05-31T15:23:44.547Z <default:INFO> Closing container Container#Predicate#re-lscjrws1/238p5c22-cons [latest-26143]2026-05-31T15:23:44.547Z <default:INFO> Closing container Container#Predicate#rule-lbwr0jvq/1xkczf03-cons [latest-26143]2026-05-31T15:23:44.547Z <Structure:NOTICE> Structure Structure#1 stopped [latest-26143]2026-05-31T15:23:44.547Z <app:NOTICE> Closing APIs... [latest-26143]2026-05-31T15:23:44.547Z <wsapi:NOTICE> wsapi: closing... [latest-26143]2026-05-31T15:23:44.547Z <wsapi:NOTICE> wsapi: disconnecting from "192.168.1.23#82" (1001 service closing) [latest-26143]2026-05-31T15:23:44.548Z <httpapi:NOTICE> HTTP API closing... [latest-26143]2026-05-31T15:23:44.549Z <wsapi:NOTICE> wsapi: server closed [latest-26143]2026-05-31T15:23:44.549Z <httpapi:INFO> HTTP server closed. [latest-26143]2026-05-31T15:23:44.549Z <app:NOTICE> Stopping timers... [latest-26143]2026-05-31T15:23:44.551Z <app:null> Shutdown complete, process ID 1 [latest-26143]2026-05-31T15:23:44.551Z <app:null> Closing logs... [latest-26143]2026-05-31T15:23:44.551Z <default:null> Closing log I can SSH to the VM. Alas, I do not have the previous image for 26143 as I'm a little too quick sometimes on housekeeping.
Multi-System Reactor

Can't customize home page

Scheduled Pinned Locked Moved Multi-System Reactor
15 Posts 2 Posters 2.7k Views 2 Watching
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • G gwp1

    I foolishly let my system wipe all cookies this morning and with it my settings for my MSR home page.

    Once logged back in I can no longer remove errant panes nor is the + available to add new ones.

    Brave Browser v1.80.122 (Jul 16, 2025)

    What have I done?!

    Will check other browsers on my M1.
    UPDATE: Safari exhibits same behaviour.
    I've tried both sans last-four public key entry and with - no change.

    G Offline
    G Offline
    gwp1
    wrote on last edited by
    #2

    Interestingly, this is still fine on my Intel Mac (though I've not cleared the cookies there and won't at this point).

    *Hubitat C-7 2.5.1.142
    *Proxmox VE v8, Beelink MiniPC 12GBs, SSD

    *HAOS
    Core 2026.7.4
    w/ HA Connect ZWA-2
    FW: v1.1
    SDK: v7.23.1

    *Prod MSR in docker/portainer
    MSR: latest-26193-8dd8f854
    MQTTController: 25139
    ZWave Controller: 25139

    1 Reply Last reply
    0
    • toggledbitsT Offline
      toggledbitsT Offline
      toggledbits
      wrote on last edited by
      #3

      First, try just a hard refresh of the browser and go back to the Status page.

      If that doesn't do it, there's a somewhat hidden "Clear Local Storage" link on the Tools page... hit that and then hard refresh and go back to Status.

      Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

      G 1 Reply Last reply
      0
      • toggledbitsT toggledbits

        First, try just a hard refresh of the browser and go back to the Status page.

        If that doesn't do it, there's a somewhat hidden "Clear Local Storage" link on the Tools page... hit that and then hard refresh and go back to Status.

        G Offline
        G Offline
        gwp1
        wrote on last edited by
        #4

        @toggledbits I'd just now finished doing first a hard refresh and then just killing the browser completely and restarting.

        Nada.

        Did the "Clear Local Storage" and hard refresh and saw the one change I'd made was gone. The issue, however, persists.

        I know Brave just updated in the last day or two...

        *Hubitat C-7 2.5.1.142
        *Proxmox VE v8, Beelink MiniPC 12GBs, SSD

        *HAOS
        Core 2026.7.4
        w/ HA Connect ZWA-2
        FW: v1.1
        SDK: v7.23.1

        *Prod MSR in docker/portainer
        MSR: latest-26193-8dd8f854
        MQTTController: 25139
        ZWave Controller: 25139

        1 Reply Last reply
        0
        • toggledbitsT Offline
          toggledbitsT Offline
          toggledbits
          wrote on last edited by
          #5

          Hit F12 for the developer window, then click the Console tab. Any errors?

          Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

          G 1 Reply Last reply
          0
          • toggledbitsT toggledbits

            Hit F12 for the developer window, then click the Console tab. Any errors?

            G Offline
            G Offline
            gwp1
            wrote on last edited by
            #6

            @toggledbits the only thing it calls out is:

            No label associated with a form field
            A <label> isn't associated with a form field.

            To fix this issue, nest the <input> in the <label> or provide a for attribute on the <label> that matches a form field id.

            1 resource
            Violating node

            Clicking the "Affected resource/violating node" nets me:

            <label id="ep-filter-label" class="form-label mt-1 pe-1">Filters:</label>
            

            *Hubitat C-7 2.5.1.142
            *Proxmox VE v8, Beelink MiniPC 12GBs, SSD

            *HAOS
            Core 2026.7.4
            w/ HA Connect ZWA-2
            FW: v1.1
            SDK: v7.23.1

            *Prod MSR in docker/portainer
            MSR: latest-26193-8dd8f854
            MQTTController: 25139
            ZWave Controller: 25139

            1 Reply Last reply
            0
            • toggledbitsT Offline
              toggledbitsT Offline
              toggledbits
              wrote on last edited by
              #7

              Yeah, that won't do it. Do you see a line that reads "Placing widget at" or "Moving widget-adder to" anywhere?

              Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

              G 1 Reply Last reply
              0
              • toggledbitsT toggledbits

                Yeah, that won't do it. Do you see a line that reads "Placing widget at" or "Moving widget-adder to" anywhere?

                G Offline
                G Offline
                gwp1
                wrote on last edited by gwp1
                #8

                @toggledbits I see the "Placing widget at"

                UI TIME CHECK: Browser 2025-07-20T22:50:33.935Z offset -240 ; host 2025-07-20T22:50:33.933Z offset(mins) -240 ; diff(ms) 2
                reactor-ui-status.js:226 Placing widget-adder at 8
                reactor-ui-status.js:913 saveGridLayout()
                reactor-ui-status.js:924 SAVE DATA Array(4)
                reactor-ui-status.js:928 Fixup widget widget3 at x/y 0 0 w/h 8 2
                reactor-ui-status.js:928 Fixup widget widget0 at x/y 8 0 w/h 3 2
                reactor-ui-status.js:928 Fixup widget widget1 at x/y 0 2 w/h 6 2
                reactor-ui-status.js:928 Fixup widget widget2 at x/y 6 2 w/h 6 2
                

                Would a .har contain all of this?

                Just to show I'm not entirely crazy here...

                14da635c-9e02-4a3d-9eb2-d0ba986cd7af-image.png

                *Hubitat C-7 2.5.1.142
                *Proxmox VE v8, Beelink MiniPC 12GBs, SSD

                *HAOS
                Core 2026.7.4
                w/ HA Connect ZWA-2
                FW: v1.1
                SDK: v7.23.1

                *Prod MSR in docker/portainer
                MSR: latest-26193-8dd8f854
                MQTTController: 25139
                ZWave Controller: 25139

                1 Reply Last reply
                0
                • toggledbitsT Offline
                  toggledbitsT Offline
                  toggledbits
                  wrote on last edited by toggledbits
                  #9

                  Is your VM Intel/AMD?

                  Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                  G 1 Reply Last reply
                  0
                  • toggledbitsT toggledbits

                    Is your VM Intel/AMD?

                    G Offline
                    G Offline
                    gwp1
                    wrote on last edited by
                    #10

                    @toggledbits hosting in Portainer. Says 90f92c5b-34c0-4a96-a22c-ece61282e5b2-image.png

                    *Hubitat C-7 2.5.1.142
                    *Proxmox VE v8, Beelink MiniPC 12GBs, SSD

                    *HAOS
                    Core 2026.7.4
                    w/ HA Connect ZWA-2
                    FW: v1.1
                    SDK: v7.23.1

                    *Prod MSR in docker/portainer
                    MSR: latest-26193-8dd8f854
                    MQTTController: 25139
                    ZWave Controller: 25139

                    1 Reply Last reply
                    0
                    • toggledbitsT Offline
                      toggledbitsT Offline
                      toggledbits
                      wrote on last edited by
                      #11

                      Great. Update to the latest container image and try again.

                      Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                      G 2 Replies Last reply
                      0
                      • toggledbitsT toggledbits

                        Great. Update to the latest container image and try again.

                        G Offline
                        G Offline
                        gwp1
                        wrote on last edited by
                        #12

                        @toggledbits missed this last night - will do so this afternoon and advise.

                        *Hubitat C-7 2.5.1.142
                        *Proxmox VE v8, Beelink MiniPC 12GBs, SSD

                        *HAOS
                        Core 2026.7.4
                        w/ HA Connect ZWA-2
                        FW: v1.1
                        SDK: v7.23.1

                        *Prod MSR in docker/portainer
                        MSR: latest-26193-8dd8f854
                        MQTTController: 25139
                        ZWave Controller: 25139

                        1 Reply Last reply
                        1
                        • toggledbitsT toggledbits

                          Great. Update to the latest container image and try again.

                          G Offline
                          G Offline
                          gwp1
                          wrote on last edited by
                          #13

                          @toggledbits Yahtzee! That did it.

                          So I... wasn't... crazy?

                          *Hubitat C-7 2.5.1.142
                          *Proxmox VE v8, Beelink MiniPC 12GBs, SSD

                          *HAOS
                          Core 2026.7.4
                          w/ HA Connect ZWA-2
                          FW: v1.1
                          SDK: v7.23.1

                          *Prod MSR in docker/portainer
                          MSR: latest-26193-8dd8f854
                          MQTTController: 25139
                          ZWave Controller: 25139

                          toggledbitsT 1 Reply Last reply
                          0
                          • G gwp1

                            @toggledbits Yahtzee! That did it.

                            So I... wasn't... crazy?

                            toggledbitsT Offline
                            toggledbitsT Offline
                            toggledbits
                            wrote on last edited by
                            #14

                            @gwp1 said in Can't customize home page:

                            So I... wasn't... crazy?

                            Absolutely not. That's my role. 😉

                            Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                            G 1 Reply Last reply
                            😁
                            0
                            • toggledbitsT toggledbits

                              @gwp1 said in Can't customize home page:

                              So I... wasn't... crazy?

                              Absolutely not. That's my role. 😉

                              G Offline
                              G Offline
                              gwp1
                              wrote on last edited by
                              #15

                              @toggledbits appreciate the quick turnaround on this. It def caught me off-guard.

                              *Hubitat C-7 2.5.1.142
                              *Proxmox VE v8, Beelink MiniPC 12GBs, SSD

                              *HAOS
                              Core 2026.7.4
                              w/ HA Connect ZWA-2
                              FW: v1.1
                              SDK: v7.23.1

                              *Prod MSR in docker/portainer
                              MSR: latest-26193-8dd8f854
                              MQTTController: 25139
                              ZWave Controller: 25139

                              1 Reply Last reply
                              1
                              • toggledbitsT toggledbits locked this topic on
                              Reply
                              • Reply as topic
                              Log in to reply
                              • Oldest to Newest
                              • Newest to Oldest
                              • Most Votes


                              Recent Topics

                              • DynamicGroupController and attributes
                                therealdbT
                                therealdb
                                1
                                8
                                187

                              • Bail out of failed reaction?
                                T
                                tamorgen
                                0
                                3
                                66

                              • Arming Envisalink panel from MSR
                                T
                                tamorgen
                                0
                                7
                                280

                              • [Solved] DynamicGroupController updating members issue
                                CrilleC
                                Crille
                                0
                                5
                                204

                              • Reactor (Multi-System/Multi-Hub) Announcements
                                toggledbitsT
                                toggledbits
                                5
                                148
                                132.7k

                              • Upgrade Issues
                                T
                                tbully
                                0
                                9
                                314

                              • [SOLVED] Conflicting Set Reaction Groups Appear to Fire Simultaneously in Single Rule Evaluation
                                toggledbitsT
                                toggledbits
                                0
                                10
                                415

                              • [SOLVED] Question regarding "in" vs "contains" vs contents of the string
                                G
                                gwp1
                                0
                                5
                                200

                              • openLuup console disappeared - 500 - Internal Server Error
                                A
                                a-lurker
                                0
                                2
                                216

                              • Logon screen timeout
                                G
                                gwp1
                                0
                                5
                                225

                              • [MSR] Copy&past of actions and/or drag&drop between set/reset
                                toggledbitsT
                                toggledbits
                                0
                                9
                                443

                              • Upgrade advice - upgrade from aarch64 to ARM64 image
                                toggledbitsT
                                toggledbits
                                0
                                4
                                247
                              Powered by NodeBB | Contributors
                              Hosted freely by 10RUPTiV - Solutions Technologiques | Contact us
                              • Login

                              • Don't have an account? Register

                              • Login or register to search.
                              • First post
                                Last post
                              0
                              • Categories
                              • Recent
                              • Tags
                              • Popular
                              • Unsolved