Reactor-Editor / Reactor-ui-Status Errors

[cw-kid]

@toggledbits What you just explained makes perfect sense.

However I would not have had a clue how to correctly construct that expression with the correct syntax.

I think I have mine setup correctly now.

I understand it wont actually work yet though.

[toggledbits]

@cw-kid said in Running Lua Code ? And watching device properties?:

However I would not have had a clue how to correctly construct that expression with the correct syntax.

Right, so I think this is a big issue in your case. My intent with this developer preview was to have experienced Reactor users help me test MSR. You're in the tough spot of coming from PLEG, with no prior Reactor experience, so not only do you not know the current product, but you also don't know if what you're looking at in the new product is right or wrong, same or different. That makes it palpably frustrating for you, and frankly for me as well, because you are not at the level I set for this test. I suspect you're also a bit irritated at having to do this at all, since Richard seems to have abandoned his product years ago (as evidenced by his near-total absence in the forums, the maturity of his product notwithstanding), and the prospect that no PLEG for eZLO seems to be in the works that I've heard.

None of that matters, at least to me, and I appreciate the effort you're putting in, and you're finding bugs and helping, so all is cool in my book, but for the fact that I feel like you're sometimes losing your perspective and treating this as if it's finished and shipped. This is a developer preview, and again, it's known to be incomplete, and its intended audience was existing Reactor users. Those users would know how to build the expression. If you're going to continue to participate, and I hope that you do, please keep this in mind. Making contact with the product this early, you are not only positioning yourself to be a master of it in future, but you're in a position to shape its future, and you have my attention.

You might take a read of the docs for Vera Reactor, to get a better lay of the land, including expressions. Things are different between the two systems, for sure, but the strong flavor is nonetheless there. You can also experiment with Vera Reactor on your Vera directly, and this may actually be very useful in helping identify other differences or gaps that should be at least documented if not closed. Either way, as the more mature product and very stable, it should help remove some of the questions and the trips in your learning curve caused by my errors in the new product. That said, I think I've shown that I will work as quickly as possible to get things shored up so that you can be productive on MSR.

Vera Reactor Docs: https://www.toggledbits.com/static/reactor/docs/

[therealdb]

@cw-kid yes, but if you define a library and register it at startup, you could do that too. I’m currently using this approach, and I like it because it’s inside a file and not a textbox.

[cw-kid]

All fair comments and observations Patrick. I certainly don't want to cause frustration to anyone.

In PLEG there was no need to of even written an expression just to monitor the value of a devices Dimming level for example. I'd just create a device property.

PLEG device properties are similar to how you build triggers in MSR, in the respect that you just select things from drop down lists. So monitoring a devices Dimming level in PLEG is trivial to setup.

Conditions in PLEG are not so trivial however and are more like writing expressions.

If MSR could build device properties or watch variables as PLEG does I think you'd be making it super easy for any user to pick up and run with MSR.

[Elcid]

In vera reactor to watch a device state you just set a variable and there is a button to pick what you want to get/watch, this creates the expression for you. The button exists in MSR, but as Patrick says expressions are not fully implemented yet. When it is you will see how simple it is. Install Vera reactor just to have a play.

[cw-kid]

OK sounds good.

[toggledbits]

@cw-kid said in Running Lua Code ? And watching device properties?:

If MSR could build device properties or watch variables as PLEG does I think you'd be making it super easy for any user to pick up and run with MSR.

I'm really not getting what you're on about here. In your example earlier in the reply, monitoring the dimming level of a device is just this simple in MSR or Vera Reactor:

You literally select the device and the attribute and you're done, with all the different operators to choose from as well. There's no need for an expression at all. The only reason we have an expression for your ealier example/request is that we need to copy the attribute value from one device to another. But if we were just going to turn on another light in response to a light turning on, no expression needed.

[cw-kid]

@therealdb said in Running Lua Code ? And watching device properties?:

if you define a library and register it at startup, you could do that too. I’m currently using this approach, and I like it because it’s inside a file and not a textbox.

Can you give me some easy to follow instructions on how to do this please?

I like the idea of having my lua code in different files stored on the Vera hub and then being able to have that Lua code run by sending a http request from my MSR rule etc.

I would like to reduce the number of Vera scenes I currently have also.

[therealdb]

@cw-kid I’ll post something on my GitHub later today, so others may benefit from this.

[therealdb]

@cw-kid here we go: https://github.com/dbochicchio/vera/tree/master/Library

I've added a sample to RunLua as well, so this should serve well our future us when in need of it

[cw-kid]

@therealdb Great thanks

First question which folder do you store the VeraScenes.lua file on the Vera file system ?

I put it in here:

/etc/cmh-ludl

EDIT

You need to upload the file via the Vera web GUI in

Apps - Develop Apps - Luup files

area not via some other means like WinSCP.

[therealdb]

@cw-kid said in Running Lua Code ? And watching device properties?:

First question which folder do you store the VeraScenes.lua file on the Vera file system ?

or just use "Upload files" from Apps.

Mandatory part is to import into Lua Startup, under Apps, Develop Apps, Edit Startup Lua.

VeraScenes = require("VeraScenes")

I'll correct the readme soon.

[cw-kid]

@therealdb said in Running Lua Code ? And watching device properties?:

Mandatory part is to import into Lua Startup, under Apps, Develop Apps, Edit Startup Lua.

I did that.

[cw-kid]

Its working now if I upload it via Vera GUI and not WinSCP

Thanks

[therealdb]

btw, your code seems to need some re-working to avoid warnings. try this:

function TTSTest()
    luup.log('VeraScenes.TTSTest')
    local mode = tonumber(luup.attr_get("Mode", 0))
	if (mode == 1) then
		luup.inet.wget("http://192.168.0.4:1880/scenetrigger?message=This is a Test&ip=192.168.0.16")
	end
end

[cw-kid]

@toggledbits said in Running Lua Code ? And watching device properties?:

That said, this won't work today, because I haven't yet connected the expressions to the action parameters

Hi

Any update on when this might happen ?

Thank you.

[Tarkus]

I have been running Lua within my Vera reactor pretty successfully. In some cases the reason was to have some conditional logic on the activity side. I found that this enabled me to keep the condition side a bit simpler and clean. I was also running lua to send Global Cache IR codes to my older Tv's. I now am trying the CG plugin that Patrick sorted out for me. The small issue with that is I need to convert all my Global Cache codes to pronto hex. I only mention so others know it does not support CG codes. There is also some lua that I use to turn off my computer. In preliminary testing the big issue I see with lua in Vera scenes is stability. I tried moving some of my lua into scenes and invoking the scenes thru MSR and everything just became real unstable with Luup restarts. I understand that this may be issues with my Vera, etc... . I also had lua in Vera reactor activities that preceded delays or other devices commands and by moving the lua into a Vera scene will that mess with the timing? Will there be a lag on the Vera side in invoking the scene while MSR continues with the reaction? The bottom line for me is I will try to make this work and eliminates much of the lua that I can. Having some legacy devices with IR contol does not help the situation I still have a lot of work to do so I can't say if everything will work out. It will be a matter of functionality and stability for me otherwise I will just stick with Vera reactor until I can't anymore. I will say that I do wish there was lua support in MSR.

[cw-kid]

@tarkus said in Running Lua Code ? And watching device properties?:

I tried moving some of my lua into scenes and invoking the scenes thru MSR

Is that working then and running the Vera scene?

I can't even seem to get that far on MSR build 0.1.21062 my Vera scene isn't being run when the reaction happens.

[toggledbits]

@cw-kid said in Running Lua Code ? And watching device properties?:

I can't even seem to get that far on MSR build 0.1.21062 my Vera scene isn't being run when the reaction happens

How are you running the scene?

[Tarkus]

Yeah, scenes run but the Vera goes haywire.