Skip to content
  • Categories
  • Recent
  • Tags
  • Popular
  • Unsolved
Collapse
Discussion Forum to share and further the development of home control and automation, independent of platforms.
  1. Home
  2. Software
  3. Multi-System Reactor
  4. Home Assistant, ReferenceError: auth is not defined
[Reactor] Help with screne controller cycling logic
therealdbT
I’ve added a couple of Shelly Wave i4 as scene controllers and I’m planning to add more, since I can just use standard buttons instead of battery-powered scene controllers, which also looks better aesthetically. That said, I’m struggling to figure out how to write a simple rule that cycles between states every time I press a button. Example: Light 1 ON → OFF, then Light 2 ON → OFF. The part I can’t get right is handling the case where Light 1 or Light 2 might already be ON independently of the rule. Maybe it’s just too much sun and relaxation clouding my brain, but any hint would be appreciated.
Multi-System Reactor
Stop the MSR by an external switch on Hubitat.
wmarcolinW
Use case: When performing home maintenance, such as air conditioning, I want all rules involving air conditioning to be disabled. To do this, to day, I have a virtual switch that I placed within all rules involving air conditioning, meaning that if I turn it off, none of them work. Then another situation: the water pump system and garden irrigation, another switch. In short, I had to create several virtual switches in Hubitat to disable rules in MSR. Unfortunately, however, I was unable to cover all scenarios, so I wondered if it would be possible for MSR to support a virtual MSR switch, which, when configured in the reactor settings, would function as a general on/off switch for MSR. If it is configured and turned off, the entire rules and actions in MSR stops working, except for the status change reading process, specifically for this switch, which, when turned on, would restart the MSR. Would it be possible to do something like this? Any recommendations from the experts?
Multi-System Reactor
[Reactor] Variables not updating correctly in latest-25201-2aa18550
therealdbT
Topic thumbnail image
Multi-System Reactor
Expose MSR entities
CatmanV2C
Probably a really dumb question. Currently I am using the owntracks_sensor for tracking phones being in region in MSR and it works great. Digging around with Home Assistant and toying with some dashboards, is there any way of exposing that sensor to HA trivially? I could set MSR to trip a virtual switch in OpenLuup which can then be exposed to HA (with all my other Vera devices) but that feels a bit in-elegant if I can do it directly. Any thoughts? Apologies if the ask is not clear/ TIA C
Multi-System Reactor
Comment in Globa Expressions
Tom_DT
I have several Global Expressions that are set by a rule so the definition area is blank. I'd like to add a comment in this area that explains what is setting the value. Commenting in this area breaks the remote setting. Any way to document what is setting the GE?
Multi-System Reactor
Unofficial thread for compatibility
tunnusT
As there are statements about compatibility for home assistant versions in MSR new version announcements (e.g. "HassController: Bless Hass to 2025.7.3"), I thought it would be good idea to track other controllers as well. As an example, I can confirm that build "latest-25208-c53e8513" works with Hubitat Elevation C-8 platform version 2.4.2.134 using Maker API.
Multi-System Reactor
Gradually turn on lights.
Tom_DT
I have several lights that I would like to turn on very gradually over 15 or 20 seconds. from 0 to .25 in .01 increments. I have tried a few things that came nowhere near working, so here I am.
Multi-System Reactor
Reactor (Multi-System/Multi-Hub) Announcements
toggledbitsT
Build 21228 has been released. Docker images available from DockerHub as usual, and bare-metal packages here. Home Assistant up to version 2021.8.6 supported; the online version of the manual will now state the current supported versions; Fix an error in OWMWeatherController that could cause it to stop updating; Unify the approach to entity filtering on all hub interface classes (controllers); this works for device entities only; it may be extended to other entities later; Improve error detail in messages for EzloController during auth phase; Add isRuleSet() and isRuleEnabled() functions to expressions extensions; Implement set action for lock and passage capabilities (makes them more easily scriptable in some cases); Fix a place in the UI where 24-hour time was not being displayed.
Multi-System Reactor
Can't customize home page
G
I foolishly let my system wipe all cookies this morning and with it my settings for my MSR home page. Once logged back in I can no longer remove errant panes nor is the + available to add new ones. Brave Browser v1.80.122 (Jul 16, 2025) What have I done?! Will check other browsers on my M1. UPDATE: Safari exhibits same behaviour. I've tried both sans last-four public key entry and with - no change.
Multi-System Reactor
Error After Upgrade
T
Topic thumbnail image
Multi-System Reactor
Reset attribute value of entity in event handler
R
Topic thumbnail image
Multi-System Reactor
Need help figuring out how to delay a reset on reaction
T
Topic thumbnail image
Multi-System Reactor
Way to search for rules (rule state) in other rules
T
@toggledbits, not sure if this is a feature request or I'm using the search tool wrong. You have a "Search for rule" in the Rules Set tab in MSR. It works nicely to find a rule and bring up said rule, but can it/could it be used for as a "where used?" global search? For instance, I have a fairly large set of rules, divided up into 10 different rulesets. There's easily a hundred individual rules, and many of the rules have Rule State triggers, which of course refer to other rules. Amongst my troubleshooting today, I came across what may have been a duplicate or troubleshooting attempt, but I can't tell if it's actually used as a Rule State in another rule without opening each rule that I suspect it may be a part of. Thanks.
Multi-System Reactor
Links to MSR from HA
Tom_DT
I am using Home Assistant a lot recently. On a dashboard showing the devices, I would like to show a link to the MSR rule that controls the devices. Is there a way to link directly into MSR?
Multi-System Reactor
Set Reaction > Script Action
wmarcolinW
Topic thumbnail image
Multi-System Reactor
Errors after updating to MQTTController build 25139
tunnusT
I'm running MSR build 25139 on Docker, using MQTT controller 24293, and everything working as expected. But if I try to upgrade to MQTTController build 25139, I'm getting the following errors on MSR UI: An Entity Attribute condition in "Lay-Z-Spa auto heating off" (Terrace) failed because the referenced entity "Lay-Z-Spa States" (mqtt>layzspa_states) does not have attribute value_sensor.god Last 11:20:37 An Entity Attribute condition in "Lay-Z-Spa auto heating off" (Terrace) failed because the referenced entity "Lay-Z-Spa States" (mqtt>layzspa_states) does not have attribute temperature_sensor.green Last 11:20:37 An Entity Attribute condition in "Lay-Z-Spa filter pump auto off" (Terrace) failed because the referenced entity "Lay-Z-Spa States" (mqtt>layzspa_states) does not have attribute temperature_sensor.red Last 11:20:37 An Entity Attribute condition in "Lay-Z-Spa filter pump auto run" (Terrace) failed because the referenced entity "Lay-Z-Spa States" (mqtt>layzspa_states) does not have attribute value_sensor.pump Last 11:20:37 An Entity Attribute condition in "Lay-Z-Spa watchdog" (Terrace) failed because the referenced entity "Lay-Z-Spa States" (mqtt>layzspa_states) does not have attribute value_sensor.status Last 11:20:37 My MQTT configuration (local_mqtt_devices.yaml) for the related entity is: layzspa_message: type: ValueSensor capabilities: ["temperature_sensor", "value_sensor", "power_sensor"] primary_attribute: power_sensor.value events: "layzspa/message": "power_sensor.value": json_payload: true if_expr: '! isnull( payload?.PWR )' expr: "float(payload.PWR)" "value_sensor.air": json_payload: true if_expr: '! isnull( payload?.AIR )' expr: "float(payload.AIR)" "value_sensor.pump": json_payload: true if_expr: '! isnull( payload?.FLT )' expr: "float(payload.FLT)" "value_sensor.god": json_payload: true if_expr: '! isnull( payload?.GOD )' expr: "float(payload.GOD)" "value_sensor.lock": json_payload: true if_expr: '! isnull( payload?.LCK )' expr: "float(payload.LCK)" "value_sensor.unit": json_payload: true if_expr: '! isnull( payload?.UNT )' expr: "float(payload.UNT)" "value_sensor.error": json_payload: true if_expr: '! isnull( payload?.ERR )' expr: "float(payload.ERR)" "temperature_sensor.green": json_payload: true if_expr: '! isnull( payload?.GRN )' expr: "float(payload.GRN)" "temperature_sensor.red": json_payload: true if_expr: '! isnull( payload?.RED )' expr: "float(payload.RED)" "temperature_sensor.target": json_payload: true if_expr: '! isnull( payload?.TGT )' expr: "float(payload.TGT)" "temperature_sensor.value": json_payload: true if_expr: '! isnull( payload?.TMP )' expr: "float(payload.TMP)" "temperature_sensor.virtual": json_payload: true if_expr: '! isnull( payload?.VTM )' expr: "round(float(payload.VTM), 1)" "temperature_sensor.ambient": json_payload: true if_expr: '! isnull( payload?.AMB )' expr: "float(payload.AMB)" "layzspa/Status": "value_sensor.status": if_expr: '! isnull( payload )' expr: "payload" "layzspa/button": "value_sensor.button": if_expr: '! isnull( payload )' expr: "payload" and in reactor.yaml I have: "layzspa_states": name: "Lay-Z-Spa States" friendly_name: 'Lay-Z-Spa States' include: layzspa_message I realize my MQTT configuration might be a bit unorthodox, but could there still be something unintentional in the latest MQTTController build? If needed, I can provide detailed logs.
Multi-System Reactor
🎉 My very first MSR controller: OpenSprinkler
therealdbT
Since today is my birthday - and I still pretend to be unconventional - I'm giving away a present to this wonderful community and I'm releasing my first OpenSprinkler controller for MSR. It was real fun to code it - and while it's still WIP, it seems to work OK for me. It's polling-based at the moment, but I'll add support for updates via MQTT very soon (it's already partially coded). Get it at (install is similar to MQTTController and such): https://github.com/dbochicchio/reactor-opensprinkler Feel free to try it. It's beta software, but it's stable. I'll update it weekly until all the tasks from my todo list are empty. Since I've learnt a lot from this controller, I'll explore new controllers soon.
Multi-System Reactor
Advice reqeusted to migrate MSR from Bare Metal to Container
T
Good day all, I'm in the process of trying to shut down my 10 year old Linux home server that served many purposes, but primarily it's what I used for my NAS/Plex Media server. I migrated the NAS aspect of the server in November of last year to a true NAS solution (Ubiquti UNAS Pro), which is rack mount and much more efficient than my old tower, which it's only side benefit was heating my home office during the winter. Unfortunately it also means heating my home office during the summer, which were about to be in full swing. I have two things running on this 10 year old server at this point. MSR and pi-hole. I'm running Plex Media Server on Fedora Workstation in Podman on mini PC, which is much more energy efficient than my old tower. My next step is to migrate MSR. I know there are images of MSR out there, and creating it is well documented. I'm going to be using Podman instead of Docker for various reasons, but they work very similar. What I don't know, is what I need to do to migrate my existing Bare Metal installation over to a container. Has anyone done this? Any advice?
Multi-System Reactor
Can´t restart or upgrade/deploy MSR
F
Topic thumbnail image
Multi-System Reactor
[Solved] Limit HA Entity in MSR
wmarcolinW
Topic thumbnail image
Multi-System Reactor

Home Assistant, ReferenceError: auth is not defined

Scheduled Pinned Locked Moved Multi-System Reactor
14 Posts 3 Posters 1.0k Views 3 Watching
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • toggledbitsT toggledbits

    Looks like you are using the wrong kind of access token. The instructions specify that you have to use a long-lived access token, and these are usually very long on Hass. Yours is very short (at least, much shorter than the LLATs I've seen on my own system). Did you use a Long-Lived Access Token?

    A Offline
    A Offline
    Andr
    wrote on last edited by Andr
    #3

    @toggledbits said in Home Assistant, ReferenceError: auth is not defined:

    Looks like you are using the wrong kind of access token. The instructions specify that you have to use a long-lived access token, and these are usually very long on Hass. Yours is very short (at least, much shorter than the LLATs I've seen on my own system). Did you use a Long-Lived Access Token?

    The lengts seems random I think.
    I did 3 tokens, first one super long.
    When it didn't work i created another one, in first post.
    Now I created the third one, and this became super long, and it works.

    No idea why, long-lived tokens is the only I can create...
    50d5ecea-25ff-49d6-a78d-84f13feafef5-image.png

    1 Reply Last reply
    0
    • F Offline
      F Offline
      Fanan
      wrote on last edited by toggledbits
      #4

      Hi! My HA does not connect either. I get a "websocket error" over and over again. This is my reactor.yaml:

        - id: hass
          enabled: true
          implementation: HassController
          name: Home Assistant
          config:
            source: 'ws://192.168.50.167:8123'
            access_token: "eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzI1NiJ9.eyJpc3MiOiI0ZDg4MzVjZmJkMjQ0ODYwODZhYzc1ZTExZDk2MGU1OSIsImlhdCI6MTYxNTczMzMyMSwiZXhwIjoxOTMxMDkzMzIxfQ.eMGyHpM"
      
      1 Reply Last reply
      0
      • F Offline
        F Offline
        Fanan
        wrote on last edited by
        #5

        In CMD it looks like this:
        2021-03-14T15:20:27.492Z HassController:NOTICE HassController#hass attempting reconnection to ws://192.168.50.167:8123/api/websocket
        2021-03-14T15:20:27.492Z HassController:NOTICE HassController#hass connecting to ws://192.168.50.167:8123/api/websocket
        2021-03-14T15:20:27.501Z HassController:WARN HassController#hass socket error during open: Error: socket hang up
        2021-03-14T15:20:27.502Z HassController:NOTICE HassController#hass socket to ws://192.168.50.167:8123/api/websocket closed during open
        2021-03-14T15:20:27.505Z HassController:ERR HassController#hass connect error with ws://192.168.50.167:8123/api/websocket: websocket error
        2021-03-14T15:20:27.505Z HassController:WARN HassController#hass failed to connect/initialize communication: websocket error

        1 Reply Last reply
        0
        • toggledbitsT Away
          toggledbitsT Away
          toggledbits
          wrote on last edited by
          #6

          Make sure you have the websocket API enabled in your Hass configuration.

          Home Assistant

          Home Assistant WebSocket API

          Home Assistant WebSocket API

          Instructions on how to setup the WebSocket API within Home Assistant.

          Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

          1 Reply Last reply
          0
          • F Offline
            F Offline
            Fanan
            wrote on last edited by
            #7

            Thanks. I stupid newbie question... I guess I should add this line to configuration.yaml:
            websocket_api:

            But what else?

            1 Reply Last reply
            0
            • toggledbitsT Away
              toggledbitsT Away
              toggledbits
              wrote on last edited by
              #8

              That's all that's necessary. I also add the documented sensor lines so I can see how many connections are active, but it's not strictly necessary to functionality.

              Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

              1 Reply Last reply
              0
              • F Offline
                F Offline
                Fanan
                wrote on last edited by
                #9

                I'm afraid it doesn't work @toggledbits. Shouldn't there be anything after the ":", an IP-adress or something?

                toggledbitsT 1 Reply Last reply
                0
                • F Fanan

                  I'm afraid it doesn't work @toggledbits. Shouldn't there be anything after the ":", an IP-adress or something?

                  toggledbitsT Away
                  toggledbitsT Away
                  toggledbits
                  wrote on last edited by toggledbits
                  #10

                  @fanan said in Home Assistant, ReferenceError: auth is not defined:

                  Shouldn't there be anything after the ":", an IP-adress or something?

                  If you are referring to the "websocket-api:" line in your Home Assistant configuration, no, that line stands by itself. It needs to be properly formatted and placed in your HomeAssistant configuration file. Check your HomeAssistant log for any errors related to its configuration file.

                  Oh, and just to make sure I've asked, are you keeping up with the builds? Are you testing on the latest build?

                  Ref: https://www.home-assistant.io/integrations/websocket_api/

                  Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                  1 Reply Last reply
                  0
                  • F Offline
                    F Offline
                    Fanan
                    wrote on last edited by
                    #11

                    Ah - I didn't understand that I had to install the websocket_api. I thought it was enough to edit the configuration.yaml-file.
                    Now I'm going to figure out how to install...

                    1 Reply Last reply
                    0
                    • F Offline
                      F Offline
                      Fanan
                      wrote on last edited by
                      #12

                      @toggledbits ; Just a stupid question, since I´m kind of new to this.... Do I have to install the websocket api? I have HACS installed and have tried to add it to the custom resporitories. I tried to add the URL:

                      core/homeassistant/components/websocket_api at dev · home-assistant/core

                      core/homeassistant/components/websocket_api at dev · home-assistant/core

                      :house_with_garden: Open source home automation that puts local control and privacy first. - home-assistant/core

                      and a few more URL as well... But I only get: "Repostitory structure for 2021.3.4 is not compliant", or something else if I try other URL:s.
                      I don't want to waste your time with these newbie questions, but after hours and days of failure, I´m becoming desperate... 🥴

                      1 Reply Last reply
                      0
                      • toggledbitsT Away
                        toggledbitsT Away
                        toggledbits
                        wrote on last edited by
                        #13

                        I just installed Hass via docker, and all I needed to do was add that line to my Hass config and generate the Long-Lived Access Token and everything connected right up. I've never had a problem connecting to Hass, and I didn't have to install anything additional. This is what my configuration file looks like:

                        # Configure a default setup of Home Assistant (frontend, api, etc)
                        default_config:
                        
                        http:
                          server_host: 0.0.0.0
                        
                        websocket_api:
                        
                        sensor:
                          platform: websocket_api
                        
                        group: !include groups.yaml
                        automation: !include automations.yaml
                        script: !include scripts.yaml
                        scene: !include scenes.yaml
                        

                        Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                        1 Reply Last reply
                        0
                        • F Offline
                          F Offline
                          Fanan
                          wrote on last edited by
                          #14

                          @toggledbits. My HA installation is on a VM (VirtualBox) on Windows 10. That shouldn't be problem I guess?

                          1 Reply Last reply
                          0
                          • toggledbitsT toggledbits locked this topic on
                          Reply
                          • Reply as topic
                          Log in to reply
                          • Oldest to Newest
                          • Newest to Oldest
                          • Most Votes


                          Recent Topics

                          • [Reactor] Help with screne controller cycling logic
                            therealdbT
                            therealdb
                            0
                            3
                            45

                          • Stop the MSR by an external switch on Hubitat.
                            wmarcolinW
                            wmarcolin
                            0
                            4
                            172

                          • [Reactor] Variables not updating correctly in latest-25201-2aa18550
                            tunnusT
                            tunnus
                            0
                            22
                            562

                          • Expose MSR entities
                            CatmanV2C
                            CatmanV2
                            0
                            11
                            109

                          • Comment in Globa Expressions
                            CrilleC
                            Crille
                            1
                            2
                            94

                          • Little Bobby tables...
                            CatmanV2C
                            CatmanV2
                            0
                            3
                            101

                          • Home Assistant Voice TTS is Easy
                            CatmanV2C
                            CatmanV2
                            0
                            3
                            151

                          • Play Audio through Home Assistant Voice Unit
                            toggledbitsT
                            toggledbits
                            1
                            1
                            95

                          • Home Assistant Voice
                            CatmanV2C
                            CatmanV2
                            0
                            21
                            735

                          • Unofficial thread for compatibility
                            tunnusT
                            tunnus
                            2
                            1
                            102

                          • Gradually turn on lights.
                            toggledbitsT
                            toggledbits
                            0
                            21
                            966

                          • Reactor (Multi-System/Multi-Hub) Announcements
                            toggledbitsT
                            toggledbits
                            5
                            123
                            56.0k
                          Powered by NodeBB | Contributors
                          Hosted freely by 10RUPTiV - Solutions Technologiques | Contact us
                          • Login

                          • Don't have an account? Register

                          • Login or register to search.
                          • First post
                            Last post
                          0
                          • Categories
                          • Recent
                          • Tags
                          • Popular
                          • Unsolved