Skip to content
  • Categories
  • Recent
  • Tags
  • Popular
  • Unsolved
Collapse
Discussion Forum to share and further the development of home control and automation, independent of platforms.
  1. Home
  2. Software
  3. Multi-System Reactor
  4. Home Assistant, ReferenceError: auth is not defined
Gradually turn on lights.
Tom_DT
I have several lights that I would like to turn on very gradually over 15 or 20 seconds. from 0 to .25 in .01 increments. I have tried a few things that came nowhere near working, so here I am.
Multi-System Reactor
Stop the MSR by an external switch on Hubitat.
wmarcolinW
Use case: When performing home maintenance, such as air conditioning, I want all rules involving air conditioning to be disabled. To do this, to day, I have a virtual switch that I placed within all rules involving air conditioning, meaning that if I turn it off, none of them work. Then another situation: the water pump system and garden irrigation, another switch. In short, I had to create several virtual switches in Hubitat to disable rules in MSR. Unfortunately, however, I was unable to cover all scenarios, so I wondered if it would be possible for MSR to support a virtual MSR switch, which, when configured in the reactor settings, would function as a general on/off switch for MSR. If it is configured and turned off, the entire rules and actions in MSR stops working, except for the status change reading process, specifically for this switch, which, when turned on, would restart the MSR. Would it be possible to do something like this? Any recommendations from the experts?
Multi-System Reactor
Error After Upgrade
T
Topic thumbnail image
Multi-System Reactor
Reset attribute value of entity in event handler
R
Topic thumbnail image
Multi-System Reactor
Need help figuring out how to delay a reset on reaction
T
Topic thumbnail image
Multi-System Reactor
Way to search for rules (rule state) in other rules
T
@toggledbits, not sure if this is a feature request or I'm using the search tool wrong. You have a "Search for rule" in the Rules Set tab in MSR. It works nicely to find a rule and bring up said rule, but can it/could it be used for as a "where used?" global search? For instance, I have a fairly large set of rules, divided up into 10 different rulesets. There's easily a hundred individual rules, and many of the rules have Rule State triggers, which of course refer to other rules. Amongst my troubleshooting today, I came across what may have been a duplicate or troubleshooting attempt, but I can't tell if it's actually used as a Rule State in another rule without opening each rule that I suspect it may be a part of. Thanks.
Multi-System Reactor
Links to MSR from HA
Tom_DT
I am using Home Assistant a lot recently. On a dashboard showing the devices, I would like to show a link to the MSR rule that controls the devices. Is there a way to link directly into MSR?
Multi-System Reactor
Set Reaction > Script Action
wmarcolinW
Topic thumbnail image
Multi-System Reactor
Errors after updating to MQTTController build 25139
tunnusT
I'm running MSR build 25139 on Docker, using MQTT controller 24293, and everything working as expected. But if I try to upgrade to MQTTController build 25139, I'm getting the following errors on MSR UI: An Entity Attribute condition in "Lay-Z-Spa auto heating off" (Terrace) failed because the referenced entity "Lay-Z-Spa States" (mqtt>layzspa_states) does not have attribute value_sensor.god Last 11:20:37 An Entity Attribute condition in "Lay-Z-Spa auto heating off" (Terrace) failed because the referenced entity "Lay-Z-Spa States" (mqtt>layzspa_states) does not have attribute temperature_sensor.green Last 11:20:37 An Entity Attribute condition in "Lay-Z-Spa filter pump auto off" (Terrace) failed because the referenced entity "Lay-Z-Spa States" (mqtt>layzspa_states) does not have attribute temperature_sensor.red Last 11:20:37 An Entity Attribute condition in "Lay-Z-Spa filter pump auto run" (Terrace) failed because the referenced entity "Lay-Z-Spa States" (mqtt>layzspa_states) does not have attribute value_sensor.pump Last 11:20:37 An Entity Attribute condition in "Lay-Z-Spa watchdog" (Terrace) failed because the referenced entity "Lay-Z-Spa States" (mqtt>layzspa_states) does not have attribute value_sensor.status Last 11:20:37 My MQTT configuration (local_mqtt_devices.yaml) for the related entity is: layzspa_message: type: ValueSensor capabilities: ["temperature_sensor", "value_sensor", "power_sensor"] primary_attribute: power_sensor.value events: "layzspa/message": "power_sensor.value": json_payload: true if_expr: '! isnull( payload?.PWR )' expr: "float(payload.PWR)" "value_sensor.air": json_payload: true if_expr: '! isnull( payload?.AIR )' expr: "float(payload.AIR)" "value_sensor.pump": json_payload: true if_expr: '! isnull( payload?.FLT )' expr: "float(payload.FLT)" "value_sensor.god": json_payload: true if_expr: '! isnull( payload?.GOD )' expr: "float(payload.GOD)" "value_sensor.lock": json_payload: true if_expr: '! isnull( payload?.LCK )' expr: "float(payload.LCK)" "value_sensor.unit": json_payload: true if_expr: '! isnull( payload?.UNT )' expr: "float(payload.UNT)" "value_sensor.error": json_payload: true if_expr: '! isnull( payload?.ERR )' expr: "float(payload.ERR)" "temperature_sensor.green": json_payload: true if_expr: '! isnull( payload?.GRN )' expr: "float(payload.GRN)" "temperature_sensor.red": json_payload: true if_expr: '! isnull( payload?.RED )' expr: "float(payload.RED)" "temperature_sensor.target": json_payload: true if_expr: '! isnull( payload?.TGT )' expr: "float(payload.TGT)" "temperature_sensor.value": json_payload: true if_expr: '! isnull( payload?.TMP )' expr: "float(payload.TMP)" "temperature_sensor.virtual": json_payload: true if_expr: '! isnull( payload?.VTM )' expr: "round(float(payload.VTM), 1)" "temperature_sensor.ambient": json_payload: true if_expr: '! isnull( payload?.AMB )' expr: "float(payload.AMB)" "layzspa/Status": "value_sensor.status": if_expr: '! isnull( payload )' expr: "payload" "layzspa/button": "value_sensor.button": if_expr: '! isnull( payload )' expr: "payload" and in reactor.yaml I have: "layzspa_states": name: "Lay-Z-Spa States" friendly_name: 'Lay-Z-Spa States' include: layzspa_message I realize my MQTT configuration might be a bit unorthodox, but could there still be something unintentional in the latest MQTTController build? If needed, I can provide detailed logs.
Multi-System Reactor
🎉 My very first MSR controller: OpenSprinkler
therealdbT
Since today is my birthday - and I still pretend to be unconventional - I'm giving away a present to this wonderful community and I'm releasing my first OpenSprinkler controller for MSR. It was real fun to code it - and while it's still WIP, it seems to work OK for me. It's polling-based at the moment, but I'll add support for updates via MQTT very soon (it's already partially coded). Get it at (install is similar to MQTTController and such): https://github.com/dbochicchio/reactor-opensprinkler Feel free to try it. It's beta software, but it's stable. I'll update it weekly until all the tasks from my todo list are empty. Since I've learnt a lot from this controller, I'll explore new controllers soon.
Multi-System Reactor
Advice reqeusted to migrate MSR from Bare Metal to Container
T
Good day all, I'm in the process of trying to shut down my 10 year old Linux home server that served many purposes, but primarily it's what I used for my NAS/Plex Media server. I migrated the NAS aspect of the server in November of last year to a true NAS solution (Ubiquti UNAS Pro), which is rack mount and much more efficient than my old tower, which it's only side benefit was heating my home office during the winter. Unfortunately it also means heating my home office during the summer, which were about to be in full swing. I have two things running on this 10 year old server at this point. MSR and pi-hole. I'm running Plex Media Server on Fedora Workstation in Podman on mini PC, which is much more energy efficient than my old tower. My next step is to migrate MSR. I know there are images of MSR out there, and creating it is well documented. I'm going to be using Podman instead of Docker for various reasons, but they work very similar. What I don't know, is what I need to do to migrate my existing Bare Metal installation over to a container. Has anyone done this? Any advice?
Multi-System Reactor
Reactor (Multi-System/Multi-Hub) Announcements
toggledbitsT
Build 21228 has been released. Docker images available from DockerHub as usual, and bare-metal packages here. Home Assistant up to version 2021.8.6 supported; the online version of the manual will now state the current supported versions; Fix an error in OWMWeatherController that could cause it to stop updating; Unify the approach to entity filtering on all hub interface classes (controllers); this works for device entities only; it may be extended to other entities later; Improve error detail in messages for EzloController during auth phase; Add isRuleSet() and isRuleEnabled() functions to expressions extensions; Implement set action for lock and passage capabilities (makes them more easily scriptable in some cases); Fix a place in the UI where 24-hour time was not being displayed.
Multi-System Reactor
Can´t restart or upgrade/deploy MSR
F
Topic thumbnail image
Multi-System Reactor
[Solved] Limit HA Entity in MSR
wmarcolinW
Topic thumbnail image
Multi-System Reactor
Organizing/ structuring rule sets and rules
R
Hi guys, Just wondering how you guys organize your rule sets and rules. I wish I had an extra layer to have some more granularity, but my feature request was not popular. Maybe there are better ways to organize my rule sets. I use the rule sets now primarily for rooms. So a rule set per room. But maybe grouping by functionality works better. Any examples/ suggestions would be appreciated.
Multi-System Reactor
Moving MSR from a QNAP container to RP 5 - some issues
Tom_DT
Topic thumbnail image
Multi-System Reactor
Widget deletion does not work and landing page (status) is empy
M
Topic thumbnail image
Multi-System Reactor
Need help reducing false positive notifications
T
Topic thumbnail image
Multi-System Reactor
Deleting widgets
tunnusT
Hopefully a trivial question, but how do you delete widgets in a status page? Using build 22266
Multi-System Reactor
MQTT configuration question
tunnusT
I have the following yaml configuration in local_mqtt_devices file x_mqtt_device: set_speed: arguments: speed: type: str topic: "command/%friendly_name%" payload: type: json expr: '{ "fan": parameters.speed }' While this works fine, I'm wondering how this could be changed to "fixed" parameters, as in this case "fan" only accepts "A", "Q" or a numeric value of 1-5?
Multi-System Reactor

Home Assistant, ReferenceError: auth is not defined

Scheduled Pinned Locked Moved Multi-System Reactor
14 Posts 3 Posters 933 Views 3 Watching
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • A Offline
    A Offline
    Andr
    wrote on last edited by Andr
    #1

    I doesn't succeed with connection to my home assistant.
    Anyone that can see what's wrong?
    I have also tried with token between " instead of '

    From reactor.yaml

    - id: hass
      enabled: true
      implementation: HassController
      name: Hassio
      config:
        source: 'ws://12.12.12.9:8123'
        access_token: 'Rm97bt83DGwqyfv4c6wiQRPByhbkJmnYwviP8MLQZXw'
    

    From command window:

    PS C:\reactor> node app.js
    Configuration path: config resolved C:\reactor\config
    2021-02-28T17:45:25.872Z <app:null> Reactor "0.1.21058" starting on v14.16.0
    2021-02-28T17:45:25.874Z <app:INFO> Process ID 1408; platform win32/x64 Windows 10 Education
    2021-02-28T17:45:25.875Z <app:INFO> Home C:\reactor; data in .
    2021-02-28T17:45:25.894Z <default:INFO> Module Entity v21057
    2021-02-28T17:45:25.898Z <Controller:null> Module Controller v21058
    2021-02-28T17:45:25.908Z <default:null> Module Structure v21050
    2021-02-28T17:45:25.917Z <default:null> Module Ruleset v21041
    2021-02-28T17:45:25.919Z <default:null> Module Rulesets v21041
    2021-02-28T17:45:25.938Z <default:null> Module Rule v21058
    2021-02-28T17:45:25.942Z <default:null> Module Engine v21055
    2021-02-28T17:45:25.944Z <default:null> Module httpapi v21041
    2021-02-28T17:45:25.954Z <default:null> Module httpproxy v21054
    2021-02-28T17:45:25.985Z <default:null> Module wsapi v21053
    2021-02-28T17:45:25.987Z <app:NOTICE> Starting HTTP server and API...
    2021-02-28T17:45:25.996Z <httpapi:NOTICE> HTTP API v1 21041 base URL http://12.12.12.12:8111; listening
    2021-02-28T17:45:26.007Z <app:NOTICE> HTTP server running; registering proxy endpoints.
    2021-02-28T17:45:26.008Z <app:NOTICE> Starting WSAPI...
    2021-02-28T17:45:26.009Z <wsapi:NOTICE> wsapi: starting version 21053
    2021-02-28T17:45:26.011Z <app:NOTICE> Endpoints up; starting Structure...
    2021-02-28T17:45:26.012Z <Structure:INFO> Structure#1 starting controller interface vera (VeraController)
    2021-02-28T17:45:26.018Z <Structure:INFO> Structure#1 starting controller interface hass (HassController)
    2021-02-28T17:45:26.021Z <Structure:INFO> Structure#1 starting controller interface weather (OWMWeatherController)
    2021-02-28T17:45:26.022Z <Structure:INFO> Structure#1 starting controller interface reactor_system (SystemController)
    2021-02-28T17:45:26.047Z <default:null> Module VeraController v21058
    2021-02-28T17:45:26.052Z <default:null> Module HassController v21053
    2021-02-28T17:45:26.054Z <default:null> Module OWMWeatherController v21027
    2021-02-28T17:45:26.065Z <default:null> Module SystemController v21054
    2021-02-28T17:45:26.076Z <VeraController:NOTICE> VeraController#vera starting
    2021-02-28T17:45:26.079Z <VeraController:INFO> VeraController#vera loaded mapping ver 21057 rev 2 format 1 notice
    2021-02-28T17:45:26.109Z <Controller:INFO> HassController#hass device data loaded; checking structure
    2021-02-28T17:45:26.111Z <Controller:ERR> ./server/lib/hass_devices.yaml implementation of capability hvac_blower_swing uses unknown attribute mode
    2021-02-28T17:45:26.112Z <Controller:WARN> ./server/lib/hass_devices.yaml implementation of capability hvac_blower_swing does not provide attribute swing; using fixed value=(null)
    2021-02-28T17:45:26.129Z <Controller:NOTICE> HassController#hass attempting reconnection to ws://12.12.12.9:8123/api/websocket
    2021-02-28T17:45:26.130Z <Controller:NOTICE> HassController#hass connecting to ws://12.12.12.9:8123/api/websocket
    2021-02-28T17:45:26.155Z <Controller:NOTICE> Controller SystemController#reactor_system is now online.
    2021-02-28T17:45:26.170Z <app:INFO> Structure is now running
    2021-02-28T17:45:26.171Z <app:INFO> Pausing for controllers' initial ready
    2021-02-28T17:45:26.190Z <Controller:NOTICE> HassController#hass connected, starting protocol
    2021-02-28T17:45:26.200Z <Controller:ERR> HassController#hass message handler for auth_invalid failed: ReferenceError: auth is not defined
    2021-02-28T17:45:26.210Z <Controller:NOTICE> HassController#hass websocket closed, 1000
    2021-02-28T17:45:26.286Z <OWMWeatherController:NOTICE> Controller OWMWeatherController#weather is now online.
    2021-02-28T17:45:26.466Z <VeraController:NOTICE> Controller VeraController#vera is now online.
    2021-02-28T17:45:26.505Z <OWMWeatherController:ERR> [Entity:setPrimaryAttribute] Attempt to set primary to power_switch.state invalid, not in { "x_vera_rgbcontroller_plugin": { "device_type": "ZWaveColorDevice", "configured": true, "color": "#e900ff0000", "message": "" } }
    2021-02-28T17:45:26.506Z <VeraController:ERR> VeraController#vera exception/error while updating VeraController#vera
    2021-02-28T17:45:26.507Z <VeraController:CRIT> Error: Entity#vera>device_235:setPrimaryAttribute() can't set power_switch.state, not defined for entity
    Error: Entity#vera>device_235:setPrimaryAttribute() can't set power_switch.state, not defined for entity
        at Entity.setPrimaryAttribute (C:\reactor\server\lib\Entity.js:364:19)
        at C:\reactor\server\lib\VeraController.js:692:118
        at processTicksAndRejections (internal/process/task_queues.js:93:5)
    Error: Entity#vera>device_235:setPrimaryAttribute() can't set power_switch.state, not defined for entity
        at Entity.setPrimaryAttribute (C:\reactor\server\lib\Entity.js:364:19)
        at C:\reactor\server\lib\VeraController.js:692:118
        at processTicksAndRejections (internal/process/task_queues.js:93:5)
    2021-02-28T17:45:31.213Z <Controller:NOTICE> HassController#hass attempting reconnection to ws://12.12.12.9:8123/api/websocket
    2021-02-28T17:45:31.215Z <Controller:NOTICE> HassController#hass connecting to ws://12.12.12.9:8123/api/websocket
    2021-02-28T17:45:31.226Z <Controller:NOTICE> HassController#hass connected, starting protocol
    2021-02-28T17:45:31.237Z <Controller:ERR> HassController#hass message handler for auth_invalid failed: ReferenceError: auth is not defined
    2021-02-28T17:45:31.256Z <Controller:NOTICE> HassController#hass websocket closed, 1000
    2021-02-28T17:45:36.258Z <Controller:NOTICE> HassController#hass attempting reconnection to ws://12.12.12.9:8123/api/websocket
    2021-02-28T17:45:36.260Z <Controller:NOTICE> HassController#hass connecting to ws://12.12.12.9:8123/api/websocket
    2021-02-28T17:45:36.272Z <Controller:NOTICE> HassController#hass connected, starting protocol
    2021-02-28T17:45:36.283Z <Controller:ERR> HassController#hass message handler for auth_invalid failed: ReferenceError: auth is not defined
    2021-02-28T17:45:36.298Z <Controller:NOTICE> HassController#hass websocket closed, 1000
    2021-02-28T17:45:41.302Z <Controller:NOTICE> HassController#hass attempting reconnection to ws://12.12.12.9:8123/api/websocket
    2021-02-28T17:45:41.303Z <Controller:NOTICE> HassController#hass connecting to ws://12.12.12.9:8123/api/websocket
    2021-02-28T17:45:41.314Z <Controller:NOTICE> HassController#hass connected, starting protocol
    2021-02-28T17:45:41.336Z <Controller:ERR> HassController#hass message handler for auth_invalid failed: ReferenceError: auth is not defined
    2021-02-28T17:45:41.353Z <Controller:NOTICE> HassController#hass websocket closed, 1000
    2021-02-28T17:45:46.355Z <Controller:NOTICE> HassController#hass attempting reconnection to ws://12.12.12.9:8123/api/websocket
    2021-02-28T17:45:46.357Z <Controller:NOTICE> HassController#hass connecting to ws://12.12.12.9:8123/api/websocket
    2021-02-28T17:45:46.368Z <Controller:NOTICE> HassController#hass connected, starting protocol
    2021-02-28T17:45:46.377Z <Controller:ERR> HassController#hass message handler for auth_invalid failed: ReferenceError: auth is not defined
    2021-02-28T17:45:46.394Z <Controller:NOTICE> HassController#hass websocket closed, 1000
    2021-02-28T17:45:47.169Z <app:NOTICE> Shutdown signal (SIGINT) received. Stopping Reaction Engine...
    2021-02-28T17:45:47.172Z <Engine:NOTICE> Engine#1 has shut down.
    2021-02-28T17:45:47.172Z <app:NOTICE> Closing APIs...
    2021-02-28T17:45:47.173Z <wsapi:NOTICE> wsapi closing...
    2021-02-28T17:45:47.179Z <httpapi:NOTICE> HTTP API closing...
    2021-02-28T17:45:47.180Z <app:NOTICE> Closing Structure...
    2021-02-28T17:45:47.181Z <Structure:INFO> Structure#1 Stopping controllers...
    2021-02-28T17:45:47.183Z <VeraController:NOTICE> VeraController#vera stopping
    2021-02-28T17:45:47.184Z <Controller:NOTICE> HassController#hass stopping
    2021-02-28T17:45:47.189Z <Controller:NOTICE> HassController#hass stopping
    2021-02-28T17:45:47.190Z <OWMWeatherController:NOTICE> OWMWeatherController#weather stopping
    2021-02-28T17:45:47.190Z <OWMWeatherController:NOTICE> OWMWeatherController#weather stopping
    2021-02-28T17:45:47.191Z <Controller:NOTICE> SystemController#reactor_system stopping
    2021-02-28T17:45:47.193Z <Controller:NOTICE> SystemController#reactor_system stopping
    2021-02-28T17:45:47.194Z <Structure:INFO> Structure#1 Final data sync...
    2021-02-28T17:45:47.199Z <Structure:NOTICE> Structure Structure#1 stopped
    2021-02-28T17:45:47.199Z <app:NOTICE> Stopping timers...
    2021-02-28T17:45:47.200Z <app:NOTICE> Shutdown complete, process ID 1408
    2021-02-28T17:45:47.201Z <wsapi:NOTICE> wsapi: server closed
    FORCED EXIT
    
    1 Reply Last reply
    0
    • toggledbitsT Offline
      toggledbitsT Offline
      toggledbits
      wrote on last edited by
      #2

      Looks like you are using the wrong kind of access token. The instructions specify that you have to use a long-lived access token, and these are usually very long on Hass. Yours is very short (at least, much shorter than the LLATs I've seen on my own system). Did you use a Long-Lived Access Token?

      Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

      A 1 Reply Last reply
      0
      • toggledbitsT toggledbits

        Looks like you are using the wrong kind of access token. The instructions specify that you have to use a long-lived access token, and these are usually very long on Hass. Yours is very short (at least, much shorter than the LLATs I've seen on my own system). Did you use a Long-Lived Access Token?

        A Offline
        A Offline
        Andr
        wrote on last edited by Andr
        #3

        @toggledbits said in Home Assistant, ReferenceError: auth is not defined:

        Looks like you are using the wrong kind of access token. The instructions specify that you have to use a long-lived access token, and these are usually very long on Hass. Yours is very short (at least, much shorter than the LLATs I've seen on my own system). Did you use a Long-Lived Access Token?

        The lengts seems random I think.
        I did 3 tokens, first one super long.
        When it didn't work i created another one, in first post.
        Now I created the third one, and this became super long, and it works.

        No idea why, long-lived tokens is the only I can create...
        50d5ecea-25ff-49d6-a78d-84f13feafef5-image.png

        1 Reply Last reply
        0
        • F Offline
          F Offline
          Fanan
          wrote on last edited by toggledbits
          #4

          Hi! My HA does not connect either. I get a "websocket error" over and over again. This is my reactor.yaml:

            - id: hass
              enabled: true
              implementation: HassController
              name: Home Assistant
              config:
                source: 'ws://192.168.50.167:8123'
                access_token: "eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzI1NiJ9.eyJpc3MiOiI0ZDg4MzVjZmJkMjQ0ODYwODZhYzc1ZTExZDk2MGU1OSIsImlhdCI6MTYxNTczMzMyMSwiZXhwIjoxOTMxMDkzMzIxfQ.eMGyHpM"
          
          1 Reply Last reply
          0
          • F Offline
            F Offline
            Fanan
            wrote on last edited by
            #5

            In CMD it looks like this:
            2021-03-14T15:20:27.492Z HassController:NOTICE HassController#hass attempting reconnection to ws://192.168.50.167:8123/api/websocket
            2021-03-14T15:20:27.492Z HassController:NOTICE HassController#hass connecting to ws://192.168.50.167:8123/api/websocket
            2021-03-14T15:20:27.501Z HassController:WARN HassController#hass socket error during open: Error: socket hang up
            2021-03-14T15:20:27.502Z HassController:NOTICE HassController#hass socket to ws://192.168.50.167:8123/api/websocket closed during open
            2021-03-14T15:20:27.505Z HassController:ERR HassController#hass connect error with ws://192.168.50.167:8123/api/websocket: websocket error
            2021-03-14T15:20:27.505Z HassController:WARN HassController#hass failed to connect/initialize communication: websocket error

            1 Reply Last reply
            0
            • toggledbitsT Offline
              toggledbitsT Offline
              toggledbits
              wrote on last edited by
              #6

              Make sure you have the websocket API enabled in your Hass configuration.

              Home Assistant

              Home Assistant WebSocket API

              Home Assistant WebSocket API

              Instructions on how to setup the WebSocket API within Home Assistant.

              Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

              1 Reply Last reply
              0
              • F Offline
                F Offline
                Fanan
                wrote on last edited by
                #7

                Thanks. I stupid newbie question... I guess I should add this line to configuration.yaml:
                websocket_api:

                But what else?

                1 Reply Last reply
                0
                • toggledbitsT Offline
                  toggledbitsT Offline
                  toggledbits
                  wrote on last edited by
                  #8

                  That's all that's necessary. I also add the documented sensor lines so I can see how many connections are active, but it's not strictly necessary to functionality.

                  Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                  1 Reply Last reply
                  0
                  • F Offline
                    F Offline
                    Fanan
                    wrote on last edited by
                    #9

                    I'm afraid it doesn't work @toggledbits. Shouldn't there be anything after the ":", an IP-adress or something?

                    toggledbitsT 1 Reply Last reply
                    0
                    • F Fanan

                      I'm afraid it doesn't work @toggledbits. Shouldn't there be anything after the ":", an IP-adress or something?

                      toggledbitsT Offline
                      toggledbitsT Offline
                      toggledbits
                      wrote on last edited by toggledbits
                      #10

                      @fanan said in Home Assistant, ReferenceError: auth is not defined:

                      Shouldn't there be anything after the ":", an IP-adress or something?

                      If you are referring to the "websocket-api:" line in your Home Assistant configuration, no, that line stands by itself. It needs to be properly formatted and placed in your HomeAssistant configuration file. Check your HomeAssistant log for any errors related to its configuration file.

                      Oh, and just to make sure I've asked, are you keeping up with the builds? Are you testing on the latest build?

                      Ref: https://www.home-assistant.io/integrations/websocket_api/

                      Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                      1 Reply Last reply
                      0
                      • F Offline
                        F Offline
                        Fanan
                        wrote on last edited by
                        #11

                        Ah - I didn't understand that I had to install the websocket_api. I thought it was enough to edit the configuration.yaml-file.
                        Now I'm going to figure out how to install...

                        1 Reply Last reply
                        0
                        • F Offline
                          F Offline
                          Fanan
                          wrote on last edited by
                          #12

                          @toggledbits ; Just a stupid question, since I´m kind of new to this.... Do I have to install the websocket api? I have HACS installed and have tried to add it to the custom resporitories. I tried to add the URL:

                          core/homeassistant/components/websocket_api at dev · home-assistant/core

                          core/homeassistant/components/websocket_api at dev · home-assistant/core

                          :house_with_garden: Open source home automation that puts local control and privacy first. - home-assistant/core

                          and a few more URL as well... But I only get: "Repostitory structure for 2021.3.4 is not compliant", or something else if I try other URL:s.
                          I don't want to waste your time with these newbie questions, but after hours and days of failure, I´m becoming desperate... 🥴

                          1 Reply Last reply
                          0
                          • toggledbitsT Offline
                            toggledbitsT Offline
                            toggledbits
                            wrote on last edited by
                            #13

                            I just installed Hass via docker, and all I needed to do was add that line to my Hass config and generate the Long-Lived Access Token and everything connected right up. I've never had a problem connecting to Hass, and I didn't have to install anything additional. This is what my configuration file looks like:

                            # Configure a default setup of Home Assistant (frontend, api, etc)
                            default_config:
                            
                            http:
                              server_host: 0.0.0.0
                            
                            websocket_api:
                            
                            sensor:
                              platform: websocket_api
                            
                            group: !include groups.yaml
                            automation: !include automations.yaml
                            script: !include scripts.yaml
                            scene: !include scenes.yaml
                            

                            Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                            1 Reply Last reply
                            0
                            • F Offline
                              F Offline
                              Fanan
                              wrote on last edited by
                              #14

                              @toggledbits. My HA installation is on a VM (VirtualBox) on Windows 10. That shouldn't be problem I guess?

                              1 Reply Last reply
                              0
                              • toggledbitsT toggledbits locked this topic on
                              Reply
                              • Reply as topic
                              Log in to reply
                              • Oldest to Newest
                              • Newest to Oldest
                              • Most Votes


                              Recent Topics

                              • Gradually turn on lights.
                                G
                                gwp1
                                0
                                4
                                131

                              • Stop the MSR by an external switch on Hubitat.
                                wmarcolinW
                                wmarcolin
                                0
                                1
                                29

                              • Error After Upgrade
                                G
                                gwp1
                                0
                                4
                                103

                              • Reset attribute value of entity in event handler
                                R
                                RHCPNG
                                0
                                5
                                199

                              • Need help figuring out how to delay a reset on reaction
                                G
                                gwp1
                                0
                                22
                                925

                              • Way to search for rules (rule state) in other rules
                                T
                                tamorgen
                                0
                                3
                                99

                              • Links to MSR from HA
                                Tom_DT
                                Tom_D
                                0
                                1
                                90

                              • Set Reaction > Script Action
                                wmarcolinW
                                wmarcolin
                                0
                                11
                                433

                              • Wiring Samotech SM308-S into light fitting
                                akbooerA
                                akbooer
                                0
                                2
                                144

                              • Errors after updating to MQTTController build 25139
                                toggledbitsT
                                toggledbits
                                0
                                6
                                236

                              • 🎉 My very first MSR controller: OpenSprinkler
                                therealdbT
                                therealdb
                                5
                                13
                                917

                              • Advice reqeusted to migrate MSR from Bare Metal to Container
                                T
                                tamorgen
                                0
                                5
                                259
                              Powered by NodeBB | Contributors
                              Hosted freely by 10RUPTiV - Solutions Technologiques | Contact us
                              • Login

                              • Don't have an account? Register

                              • Login or register to search.
                              • First post
                                Last post
                              0
                              • Categories
                              • Recent
                              • Tags
                              • Popular
                              • Unsolved