Skip to content
  • Categories
  • Recent
  • Tags
  • Popular
  • Unsolved
Collapse
Discussion Forum to share and further the development of home control and automation, independent of platforms.
  1. Home
  2. Software
  3. Multi-System Reactor
  4. Plugin InfluxFeed - Selecting Capabilities for Export - how to
[MSR] Rule do not fire
therealdbT
Topic thumbnail image
Multi-System Reactor
Rule condition shows TRUE in UI but Rule never transitions to SET — survives full restart
N
Build: latest-26221-b25bb3e3, Docker on Synology. Hi, I have a Rule whose Trigger/Constraints reference other Rules via Rule State ... is TRUE. At some point it stops firing. Expanding the rule's condition tree in the UI shows every Trigger and Constraint condition green/TRUE — confirmed live by walking into the room and watching Motion go true in real time. Rule History shows no new SET, just old reset entries. Tried, on the same rule, same evening: recreating the trigger conditions with fresh IDs, recreating the constraint conditions with fresh IDs (flat and wrapped in a new Group — wrapping in a Group produced one SET, but it didn't reproduce on repeat attempts with the same structure), and finally a full container restart with a verified-correct saved rule. Still no SET, even with a fresh live motion event right after the restart. Separately, I found that this rule (and its 10 per-room clones) share identical internal condition/group IDs with each other — leftover from a batch clone done months ago, never regenerated. Not sure if that's related, since fixing the IDs didn't reliably fix the symptom either. Has anyone seen a Rule State condition show TRUE in the UI without the Rule ever producing a SET, surviving a clean restart? Thanks in advance
Multi-System Reactor
DynamicGroupController and attributes
therealdbT
Hey @toggledbits I'm back to trying to optimize a couple of things based on dynamic group. First of all, I think I found a typo in the doc: primary_attribute: "binary_sensor.state" primary_attribute_value: | d = false; each id in members: d = getEntity(id)?.attributes?.power_switch?.state or d, d I think the correct code snippet is d = false, All that said, my use case for dynamic groups is to group 3 different climate devices, so I could easily command them at the same time. Commands are good, but sometimes I want to check if any of the devices are on, and that's easily done with a similar snippet as the one you have in the docs. But this is limited to the primary attribute, while I want to have any of the attributes in the group to be driven by a similar logic (while all are null in the group). ie, access hvac_control.mode and see if any of the unit is set to cool, or heat. Is that possible, without re-defining an expression in each of my rules? Thanks!
Multi-System Reactor
Reactor (Multi-System/Multi-Hub) Announcements
toggledbitsT
Build 21228 has been released. Docker images available from DockerHub as usual, and bare-metal packages here. Home Assistant up to version 2021.8.6 supported; the online version of the manual will now state the current supported versions; Fix an error in OWMWeatherController that could cause it to stop updating; Unify the approach to entity filtering on all hub interface classes (controllers); this works for device entities only; it may be extended to other entities later; Improve error detail in messages for EzloController during auth phase; Add isRuleSet() and isRuleEnabled() functions to expressions extensions; Implement set action for lock and passage capabilities (makes them more easily scriptable in some cases); Fix a place in the UI where 24-hour time was not being displayed.
Multi-System Reactor
Unofficial thread for compatibility
tunnusT
As there are statements about compatibility for home assistant versions in MSR new version announcements (e.g. "HassController: Bless Hass to 2025.7.3"), I thought it would be good idea to track other controllers as well. As an example, I can confirm that build "latest-25208-c53e8513" works with Hubitat Elevation C-8 platform version 2.4.2.134 using Maker API. Updates: (the latest versions first in the list) OK: build "latest-25264-2fbe9217" with Hubitat C-8 platform v. 2.4.3.123
Multi-System Reactor
Ooops - Deleted Reactor Ex Machina II
R
I accidentally deleted Reactor Ex Machina II (REM II) from my Reactor rules. I tried to recover it by deleting the .json and .dval in the Rules subdirectory and then recreating it from Togglebits original posting, but that did not work. Does anyone know how to recover REM ll ?
Multi-System Reactor
Bail out of failed reaction?
T
Topic thumbnail image
Multi-System Reactor
Arming Envisalink panel from MSR
T
Topic thumbnail image
Multi-System Reactor
[Solved] DynamicGroupController updating members issue
CrilleC
Edit: Solved in latest-26221. Bare-metal latest-26193 I have this group: "OKforLarm": name: OK för Larm select: - include_controller: vera - include_capability: door_sensor filter_expression: entity.attributes.door_sensor.state It contains the entities I expect but behaves a bit odd. When I open vera>device_10097 the entity attribute door_sensor.state changes to true but it won't show up as member in the group, when I also open vera>device_10095 they both shows as members and when I close vera>device_10095 it disappear from the group but when I close vera>device_10097 it lingers in the group until I restart Reactor.
Multi-System Reactor
Upgrade Issues
T
Topic thumbnail image
Multi-System Reactor
[SOLVED] Conflicting Set Reaction Groups Appear to Fire Simultaneously in Single Rule Evaluation
G
Topic thumbnail image
Multi-System Reactor
[SOLVED] Question regarding "in" vs "contains" vs contents of the string
G
Topic thumbnail image
Multi-System Reactor
Logon screen timeout
G
Noticing since 170 that the lock screen doesn't switch to the logon prompt but, rather, stays on the active UI until such time as you go to click something within it. Then it jumps to the login screen. Brave browser Brave 1.92.139 (Official Build) (arm64) Chromium: 150.0.7871.114
Multi-System Reactor
[MSR] Copy&past of actions and/or drag&drop between set/reset
therealdbT
Hey @toggledbits One thing that bothers me while doing work on new systems/new features, is that I cannot copy&paste actions, and I cannot drag&drop between set and resets. #1 is for when I want to copy an action between different rules opened in two separate browser windows, while #2 is when I just need to flip a bunch of actions in the reset, or move some logic back and forth. Both will be appreciated, but I understand the technical challenges. Thanks!
Multi-System Reactor
Upgrade advice - upgrade from aarch64 to ARM64 image
T
I'm currently on version 26011. I understand that the aarch64 image is no longer supported. So, I therefore need to update to the ARM64 image. Can anyone possibly suggest how I update my docker compose.yaml file (see below). Ideally I'd like to keep my existing reactions etc. rather than start from scratch. # Multi-System Reactor template docker-compose.yml (version 22160) # # Change the lines indicated by "DO"... # services: reactor: container_name: reactor environment: # DO change the TZ: line to set your local time zone. # See valid TZ list: https://en.wikipedia.org/wiki/List_of_tz_database_time_zones TZ: GB # # DO NOT change this path. Your directory location is in "source" below. REACTOR_DATA_PREFIX: /var/reactor # DO change the image below to the one you are using (e.g. armv7l or aarch64 for RPi 4) image: toggledbits/reactor:latest-aarch64 restart: "always" expose: - 8111 ports: - 8111:8111 volumes: # DO change the /home/username/reactor below to the directory you created for # your local data; DO NOT change the /var/reactor part - /home/pi/docker/reactor:/var/reactor - /etc/localtime:/etc/localtime:ro tmpfs: /tmp
Multi-System Reactor
Alexa for MSR, any interest?
MikeReadingtonM
Topic thumbnail image
Multi-System Reactor
[RESOLVED] Telegram notification broke with latest update
3
Topic thumbnail image
Multi-System Reactor
[RESOLVED] Phantom device, “INFO” appears
wmarcolinW
Topic thumbnail image
Multi-System Reactor
[RESOLVED] Mode Status NULL
wmarcolinW
Topic thumbnail image
Multi-System Reactor
[RESOLVED] HTTP query failing after version 26177
wmarcolinW
Topic thumbnail image
Multi-System Reactor

Plugin InfluxFeed - Selecting Capabilities for Export - how to

Scheduled Pinned Locked Moved Multi-System Reactor
11 Posts 2 Posters 1.9k Views 2 Watching
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • N Offline
    N Offline
    noelab
    wrote on last edited by
    #1

    hi, I'm trying to modify reator.yaml as illustrated in docs but no luck to change something, I continue to see only default capabilities/attributes.
    How can I understand better the problem?

    Example OWM:
    I want to add wx.feels_like and wx.pressure
    is it correct? if yes, there are no changes in db fields

      select_capabilities:
           x_ezlo_item: true
           wx:                   
             attributes:
                - feels_like
                - pressure
                - electric_meter_kwh
                - electric_meter_watt
    

    If I want to add these parameter?

    • x_ezlo_item.electric_meter_kwh
    • x_ezlo_item.electric_meter_watt

    After I did the changes, I let to start influxdb first and then MSR.
    Also creating new bucket, I don't see any changes.

    Synology - Docker
    Influxdb 2.1.1
    Reactor (Multi-hub) latest-21342-ead7ca9

    Thanks in advance

    -Reactor (Multi-hub) 26221-b25bb3e3
    -Docker on Synology NAS
    -HASS Docker 2026.8.1
    -ZWaveJS-UI 11.22.3
    -Update 16/08/2026

    1 Reply Last reply
    0
    • toggledbitsT Offline
      toggledbitsT Offline
      toggledbits
      wrote on last edited by
      #2

      Can you show your entire config for InfluxDB plugin? The indenting of your example would be incorrect to start, so I'd like to see the whole thing and make sure you're starting from something that has a chance at being functional. This doesn't look right on its face, but being a subset of the entire, it's hard to be sure.

      Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

      1 Reply Last reply
      0
      • N Offline
        N Offline
        noelab
        wrote on last edited by
        #3

        Hi, this is the config

        plugins:
          - id: influx
            # See the docs under Standard Plugins for configuration details.
            implementation: InfluxFeed
            enabled: true
            name: InfluxDB Feed
            config:
              # influx_url - URL to access InfluxDB server (default: http://localhost:8086)
              influx_url: "http://10.0.4.71:8086"
              #
              # ----- For InfluxDB 2.0+ ONLY -----
              # influx_token - Token from InfluxDB 2.0 UI (required)
              influx_token: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
              #
              # influx_org - Organization ID (required)
              influx_org: myhome
              #
              # influx_bucket - Bucket name to which points are written (required)
              influx_bucket: reactor
              #
              #
              # ----- Optional (all versions) -----
              # influx_retention_policy - Retention policy (optional). If not specified,
              #                           the retention policy of the bucket/database
              #                           will be used.
              #influx_retention_policy: ""
              #
              # ----- Filtering (all versions) -----
              # select_capabilities - Capabilities that should be exported in addition
              #                       to the defaults. These are key/value pairs. If the
              #                       value is false, the capability is not exported (so
              #                       you can override the default). If the value is an
              #                       object, it may contain an "attributes" key with an
              #                       array value containing the names of attributes to
              #                       be exported (other attributes in the capability
              #                       are ignored).
              select_capabilities:
                light_sensor: true
                power_sensor: true
                dimming: false
                x_ezlo_item: true
                  attributes:
                    - electric_meter_kwh
                    - electric_meter_watt
        
              #  zwave_network: false  # do not export this capability
               wx:                   # export wx capability, but only named attributes
                 attributes:
                    - temperature
                    - humidity
                    - feels_like
        

        -Reactor (Multi-hub) 26221-b25bb3e3
        -Docker on Synology NAS
        -HASS Docker 2026.8.1
        -ZWaveJS-UI 11.22.3
        -Update 16/08/2026

        1 Reply Last reply
        0
        • toggledbitsT Offline
          toggledbitsT Offline
          toggledbits
          wrote on last edited by toggledbits
          #4

          OK. Your indenting is wonky and there's another error that's probably causing problems parsing the entire config. You should use a tool like https://yamlchecker.com on any changes you make (paste the entire config file) until you get used to the idiosyncrasies of YAML, and then any time you run into problems. There are also probably messages in the log file about problems reading the file, too, so be sure and always check there when something is not working as expected.

          Specifically, on line 42, you can't have object keys in this position, because line 41 defines a value (true) for x_ezlo_item. Using true says you want everything from that capability; it's a short-cut. If you mean to limit the set of attributes for x_ezlo_item, then the value there must be an object for which attributes is a key. So that would correctly look like this (other lines redacted for clarity):

                select_capabilities:
                  x_ezlo_item:
                    attributes:
                      - electric_meter_kwh
                      - electric_meter_watt
          

          Your wx line (47) is not correctly indented, nor is the comment line before it, so that's going to be trouble as well. It should look like this in all:

          plugins:
            - id: influx
              # See the docs under Standard Plugins for configuration details.
              implementation: InfluxFeed
              enabled: true
              name: InfluxDB Feed
              config:
                # influx_url - URL to access InfluxDB server (default: http://localhost:8086)
                influx_url: "http://10.0.4.71:8086"
                #
                # ----- For InfluxDB 2.0+ ONLY -----
                # influx_token - Token from InfluxDB 2.0 UI (required)
                influx_token: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
                #
                # influx_org - Organization ID (required)
                influx_org: myhome
                #
                # influx_bucket - Bucket name to which points are written (required)
                influx_bucket: reactor
                #
                #
                # ----- Optional (all versions) -----
                # influx_retention_policy - Retention policy (optional). If not specified,
                #                           the retention policy of the bucket/database
                #                           will be used.
                #influx_retention_policy: ""
                #
                # ----- Filtering (all versions) -----
                # select_capabilities - Capabilities that should be exported in addition
                #                       to the defaults. These are key/value pairs. If the
                #                       value is false, the capability is not exported (so
                #                       you can override the default). If the value is an
                #                       object, it may contain an "attributes" key with an
                #                       array value containing the names of attributes to
                #                       be exported (other attributes in the capability
                #                       are ignored).
                select_capabilities:
                  light_sensor: true
                  power_sensor: true
                  dimming: false
                  x_ezlo_item:
                    attributes:
                      - electric_meter_kwh
                      - electric_meter_watt
           
                  #zwave_network: false  # do not export this capability
                  wx:                   # export wx capability, but only named attributes
                    attributes:
                      - temperature
                      - humidity
                      - feels_like
          

          Unfortunately, I realize YAML is a nuisance, but JSON would be worse, I loathe XML and its progeny, and the Microsoft-ish INI format isn't really up to the task either. I begrudgingly chose YAML because there's little that's better, and a lot of tools and documentation for it. Eventually, there will be a GUI for this kind of configuration, but that's a good way off yet.

          Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

          1 Reply Last reply
          0
          • N Offline
            N Offline
            noelab
            wrote on last edited by
            #5

            I corrected the file
            Valid YAML!
            Still no changes in influxdb
            I created a new bucket and new api tokens, when I go in "Explore" --> Filter Measurement -->Filter
            I see only default data:
            dimming is there
            no wx.feels_like
            and no x_ezlo_item

            also I stopped both container and I started first influxdb and then MSR, where I can check now?

            -Reactor (Multi-hub) 26221-b25bb3e3
            -Docker on Synology NAS
            -HASS Docker 2026.8.1
            -ZWaveJS-UI 11.22.3
            -Update 16/08/2026

            1 Reply Last reply
            0
            • toggledbitsT Offline
              toggledbitsT Offline
              toggledbits
              wrote on last edited by
              #6

              It will only log things when things change. So make sure you are making things happen.

              Also, what version of InfluxDB are you using?

              And check the log file, particularly the messages output at startup.

              Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

              1 Reply Last reply
              0
              • N Offline
                N Offline
                noelab
                wrote on last edited by
                #7

                Is is version InfluxDB 2.1.1

                a lot of Warm from Ezlo

                [latest-21342]2021-12-11T22:44:11.586Z <EzloController:WARN> EzloController#ezlo no implementation mapping for attributes from match category=level_sensor cap value_sensor
                [latest-21342]2021-12-11T22:44:11.599Z <EzloController:WARN> EzloController#ezlo no implementation mapping for attributes from match category=level_sensor cap value_sensor
                [latest-21342]2021-12-11T22:44:11.615Z <EzloController:WARN> EzloController#ezlo no implementation mapping for attributes from match category=level_sensor cap value_sensor
                [latest-21342]2021-12-11T22:44:11.633Z <EzloController:WARN> EzloController#ezlo no implementation mapping for attributes from match category=level_sensor cap value_sensor
                [latest-21342]2021-12-11T22:44:11.637Z <EzloController:ERR> EzloController#ezlo failed to evaluate expression value.red for attribute rgb_color.red in category=dimmable_light;subcategory=dimmable_colored: ReferenceError: Invalid reference to member red of null
                [latest-21342]2021-12-11T22:44:11.637Z <EzloController:ERR> EzloController#ezlo failed to evaluate expression value.green for attribute rgb_color.green in category=dimmable_light;subcategory=dimmable_colored: ReferenceError: Invalid reference to member green of null
                [latest-21342]2021-12-11T22:44:11.637Z <EzloController:ERR> EzloController#ezlo failed to evaluate expression value.blue for attribute rgb_color.blue in category=dimmable_light;subcategory=dimmable_colored: ReferenceError: Invalid reference to member blue of null
                [latest-21342]2021-12-11T22:44:11.638Z <EzloController:ERR> EzloController#ezlo failed to evaluate expression value.cwhite > 0 ? floor( 5500 + value.cwhite * 3500 / 255 ) : floor( 2000 + value.wwhite * 3500 / 255 ) for attribute color_temperature.value in category=dimmable_light;subcategory=dimmable_colored: ReferenceError: Invalid reference to member cwhite of null
                [latest-21342]2021-12-11T22:44:11.639Z <EzloController:ERR> EzloController#ezlo failed to evaluate expression value.red for attribute rgb_color.red in category=dimmable_light;subcategory=dimmable_colored: ReferenceError: Invalid reference to member red of null
                [latest-21342]2021-12-11T22:44:11.639Z <EzloController:ERR> EzloController#ezlo failed to evaluate expression value.green for attribute rgb_color.green in category=dimmable_light;subcategory=dimmable_colored: ReferenceError: Invalid reference to member green of null
                [latest-21342]2021-12-11T22:44:11.640Z <EzloController:ERR> EzloController#ezlo failed to evaluate expression value.blue for attribute rgb_color.blue in category=dimmable_light;subcategory=dimmable_colored: ReferenceError: Invalid reference to member blue of null
                [latest-21342]2021-12-11T22:44:11.640Z <EzloController:ERR> EzloController#ezlo failed to evaluate expression value.cwhite > 0 ? floor( 5500 + value.cwhite * 3500 / 255 ) : floor( 2000 + value.wwhite * 3500 / 255 ) for attribute color_temperature.value in category=dimmable_light;subcategory=dimmable_colored: ReferenceError: Invalid reference to member cwhite of null
                [latest-21342]2021-12-11T22:44:11.641Z <EzloController:ERR> EzloController#ezlo failed to evaluate expression value.red for attribute rgb_color.red in category=dimmable_light;subcategory=dimmable_colored: ReferenceError: Invalid reference to member red of null
                [latest-21342]2021-12-11T22:44:11.641Z <EzloController:ERR> EzloController#ezlo failed to evaluate expression value.green for attribute rgb_color.green in category=dimmable_light;subcategory=dimmable_colored: ReferenceError: Invalid reference to member green of null
                [latest-21342]2021-12-11T22:44:11.642Z <EzloController:ERR> EzloController#ezlo failed to evaluate expression value.blue for attribute rgb_color.blue in category=dimmable_light;subcategory=dimmable_colored: ReferenceError: Invalid reference to member blue of null
                [latest-21342]2021-12-11T22:44:11.642Z <EzloController:ERR> EzloController#ezlo failed to evaluate expression value.cwhite > 0 ? floor( 5500 + value.cwhite * 3500 / 255 ) : floor( 2000 + value.wwhite * 3500 / 255 ) for attribute color_temperature.value in category=dimmable_light;subcategory=dimmable_colored: ReferenceError: Invalid reference to member cwhite of null
                [latest-21342]2021-12-11T22:44:11.643Z <EzloController:ERR> EzloController#ezlo failed to evaluate expression value.red for attribute rgb_color.red in category=dimmable_light;subcategory=dimmable_colored: ReferenceError: Invalid reference to member red of null
                [latest-21342]2021-12-11T22:44:11.643Z <EzloController:ERR> EzloController#ezlo failed to evaluate expression value.green for attribute rgb_color.green in category=dimmable_light;subcategory=dimmable_colored: ReferenceError: Invalid reference to member green of null
                [latest-21342]2021-12-11T22:44:11.644Z <EzloController:ERR> EzloController#ezlo failed to evaluate expression value.blue for attribute rgb_color.blue in category=dimmable_light;subcategory=dimmable_colored: ReferenceError: Invalid reference to member blue of null
                [latest-21342]2021-12-11T22:44:11.644Z <EzloController:ERR> EzloController#ezlo failed to evaluate expression value.cwhite > 0 ? floor( 5500 + value.cwhite * 3500 / 255 ) : floor( 2000 + value.wwhite * 3500 / 255 ) for attribute color_temperature.value in category=dimmable_light;subcategory=dimmable_colored: ReferenceError: Invalid reference to member cwhite of null
                [latest-21342]2021-12-11T22:44:11.648Z <EzloController:ERR> EzloController#ezlo failed to evaluate expression value.red for attribute rgb_color.red in category=dimmable_light;subcategory=dimmable_colored: ReferenceError: Invalid reference to member red of null
                [latest-21342]2021-12-11T22:44:11.649Z <EzloController:ERR> EzloController#ezlo failed to evaluate expression value.green for attribute rgb_color.green in category=dimmable_light;subcategory=dimmable_colored: ReferenceError: Invalid reference to member green of null
                [latest-21342]2021-12-11T22:44:11.649Z <EzloController:ERR> EzloController#ezlo failed to evaluate expression value.blue for attribute rgb_color.blue in category=dimmable_light;subcategory=dimmable_colored: ReferenceError: Invalid reference to member blue of null
                [latest-21342]2021-12-11T22:44:11.649Z <EzloController:ERR> EzloController#ezlo failed to evaluate expression value.cwhite > 0 ? floor( 5500 + value.cwhite * 3500 / 255 ) : floor( 2000 + value.wwhite * 3500 / 255 ) for attribute color_temperature.value in category=dimmable_light;subcategory=dimmable_colored: ReferenceError: Invalid reference to member cwhite of null
                [latest-21342]2021-12-11T22:44:11.651Z <EzloController:ERR> EzloController#ezlo failed to evaluate expression value.red for attribute rgb_color.red in category=dimmable_light;subcategory=dimmable_colored: ReferenceError: Invalid reference to member red of null
                [latest-21342]2021-12-11T22:44:11.651Z <EzloController:ERR> EzloController#ezlo failed to evaluate expression value.green for attribute rgb_color.green in category=dimmable_light;subcategory=dimmable_colored: ReferenceError: Invalid reference to member green of null
                [latest-21342]2021-12-11T22:44:11.651Z <EzloController:ERR> EzloController#ezlo failed to evaluate expression value.blue for attribute rgb_color.blue in category=dimmable_light;subcategory=dimmable_colored: ReferenceError: Invalid reference to member blue of null
                [latest-21342]2021-12-11T22:44:11.651Z <EzloController:ERR> EzloController#ezlo failed to evaluate expression value.cwhite > 0 ? floor( 5500 + value.cwhite * 3500 / 255 ) : floor( 2000 + value.wwhite * 3500 / 255 ) for attribute color_temperature.value in category=dimmable_light;subcategory=dimmable_colored: ReferenceError: Invalid reference to member cwhite of null
                [latest-21342]2021-12-11T22:44:11.657Z <EzloController:ERR> EzloController#ezlo failed to evaluate expression value.red for attribute rgb_color.red in category=dimmable_light;subcategory=dimmable_colored: ReferenceError: Invalid reference to member red of null
                [latest-21342]2021-12-11T22:44:11.657Z <EzloController:ERR> EzloController#ezlo failed to evaluate expression value.green for attribute rgb_color.green in category=dimmable_light;subcategory=dimmable_colored: ReferenceError: Invalid reference to member green of null
                [latest-21342]2021-12-11T22:44:11.658Z <EzloController:ERR> EzloController#ezlo failed to evaluate expression value.blue for attribute rgb_color.blue in category=dimmable_light;subcategory=dimmable_colored: ReferenceError: Invalid reference to member blue of null
                [latest-21342]2021-12-11T22:44:11.658Z <EzloController:ERR> EzloController#ezlo failed to evaluate expression value.cwhite > 0 ? floor( 5500 + value.cwhite * 3500 / 255 ) : floor( 2000 + value.wwhite * 3500 / 255 ) for attribute color_temperature.value in category=dimmable_light;subcategory=dimmable_colored: ReferenceError: Invalid reference to member cwhite of null
                [latest-21342]2021-12-11T22:44:11.659Z <EzloController:ERR> EzloController#ezlo failed to evaluate expression value.red for attribute rgb_color.red in category=dimmable_light;subcategory=dimmable_colored: ReferenceError: Invalid reference to member red of null
                [latest-21342]2021-12-11T22:44:11.660Z <EzloController:ERR> EzloController#ezlo failed to evaluate expression value.green for attribute rgb_color.green in category=dimmable_light;subcategory=dimmable_colored: ReferenceError: Invalid reference to member green of null
                [latest-21342]2021-12-11T22:44:11.660Z <EzloController:ERR> EzloController#ezlo failed to evaluate expression value.blue for attribute rgb_color.blue in category=dimmable_light;subcategory=dimmable_colored: ReferenceError: Invalid reference to member blue of null
                [latest-21342]2021-12-11T22:44:11.660Z <EzloController:ERR> EzloController#ezlo failed to evaluate expression value.cwhite > 0 ? floor( 5500 + value.cwhite * 3500 / 255 ) : floor( 2000 + value.wwhite * 3500 / 255 ) for attribute color_temperature.value in category=dimmable_light;subcategory=dimmable_colored: ReferenceError: Invalid reference to member cwhite of null
                [latest-21342]2021-12-11T22:44:11.663Z <EzloController:ERR> EzloController#ezlo failed to evaluate expression value.red for attribute rgb_color.red in category=dimmable_light;subcategory=dimmable_colored: ReferenceError: Invalid reference to member red of null
                [latest-21342]2021-12-11T22:44:11.663Z <EzloController:ERR> EzloController#ezlo failed to evaluate expression value.green for attribute rgb_color.green in category=dimmable_light;subcategory=dimmable_colored: ReferenceError: Invalid reference to member green of null
                [latest-21342]2021-12-11T22:44:11.663Z <EzloController:ERR> EzloController#ezlo failed to evaluate expression value.blue for attribute rgb_color.blue in category=dimmable_light;subcategory=dimmable_colored: ReferenceError: Invalid reference to member blue of null
                [latest-21342]2021-12-11T22:44:11.664Z <EzloController:ERR> EzloController#ezlo failed to evaluate expression value.cwhite > 0 ? floor( 5500 + value.cwhite * 3500 / 255 ) : floor( 2000 + value.wwhite * 3500 / 255 ) for attribute color_temperature.value in category=dimmable_light;subcategory=dimmable_colored: ReferenceError: Invalid reference to member cwhite of null
                [latest-21342]2021-12-11T22:44:11.665Z <EzloController:ERR> EzloController#ezlo failed to evaluate expression value.red for attribute rgb_color.red in category=dimmable_light;subcategory=dimmable_colored: ReferenceError: Invalid reference to member red of null
                [latest-21342]2021-12-11T22:44:11.666Z <EzloController:ERR> EzloController#ezlo failed to evaluate expression value.green for attribute rgb_color.green in category=dimmable_light;subcategory=dimmable_colored: ReferenceError: Invalid reference to member green of null
                [latest-21342]2021-12-11T22:44:11.666Z <EzloController:ERR> EzloController#ezlo failed to evaluate expression value.blue for attribute rgb_color.blue in category=dimmable_light;subcategory=dimmable_colored: ReferenceError: Invalid reference to member blue of null
                [latest-21342]2021-12-11T22:44:11.666Z <EzloController:ERR> EzloController#ezlo failed to evaluate expression value.cwhite > 0 ? floor( 5500 + value.cwhite * 3500 / 255 ) : floor( 2000 + value.wwhite * 3500 / 255 ) for attribute color_temperature.value in category=dimmable_light;subcategory=dimmable_colored: ReferenceError: Invalid reference to member cwhite of null
                [latest-21342]2021-12-11T22:44:11.667Z <EzloController:ERR> EzloController#ezlo failed to evaluate expression value.red for attribute rgb_color.red in category=dimmable_light;subcategory=dimmable_colored: ReferenceError: Invalid reference to member red of null
                [latest-21342]2021-12-11T22:44:11.668Z <EzloController:ERR> EzloController#ezlo failed to evaluate expression value.green for attribute rgb_color.green in category=dimmable_light;subcategory=dimmable_colored: ReferenceError: Invalid reference to member green of null
                [latest-21342]2021-12-11T22:44:11.668Z <EzloController:ERR> EzloController#ezlo failed to evaluate expression value.blue for attribute rgb_color.blue in category=dimmable_light;subcategory=dimmable_colored: ReferenceError: Invalid reference to member blue of null
                [latest-21342]2021-12-11T22:44:11.669Z <EzloController:ERR> EzloController#ezlo failed to evaluate expression value.cwhite > 0 ? floor( 5500 + value.cwhite * 3500 / 255 ) : floor( 2000 + value.wwhite * 3500 / 255 ) for attribute color_temperature.value in category=dimmable_light;subcategory=dimmable_colored: ReferenceError: Invalid reference to member cwhite of null
                [latest-21342]2021-12-11T22:44:11.670Z <EzloController:ERR> EzloController#ezlo failed to evaluate expression value.red for attribute rgb_color.red in category=dimmable_light;subcategory=dimmable_colored: ReferenceError: Invalid reference to member red of null
                [latest-21342]2021-12-11T22:44:11.670Z <EzloController:ERR> EzloController#ezlo failed to evaluate expression value.green for attribute rgb_color.green in category=dimmable_light;subcategory=dimmable_colored: ReferenceError: Invalid reference to member green of null
                [latest-21342]2021-12-11T22:44:11.671Z <EzloController:ERR> EzloController#ezlo failed to evaluate expression value.blue for attribute rgb_color.blue in category=dimmable_light;subcategory=dimmable_colored: ReferenceError: Invalid reference to member blue of null
                [latest-21342]2021-12-11T22:44:11.671Z <EzloController:ERR> EzloController#ezlo failed to evaluate expression value.cwhite > 0 ? floor( 5500 + value.cwhite * 3500 / 255 ) : floor( 2000 + value.wwhite * 3500 / 255 ) for attribute color_temperature.value in category=dimmable_light;subcategory=dimmable_colored: ReferenceError: Invalid reference to member cwhite of null
                [latest-21342]2021-12-11T22:44:11.693Z <EzloController:WARN> EzloController#ezlo no implementation mapping for attributes from match category=door_lock cap keypad
                [latest-21342]2021-12-11T22:44:11.727Z <EzloController:INFO> EzloController#ezlo hub inventory complete/successful; 971ms
                [latest-21342]2021-12-11T22:44:11.728Z <EzloController:NOTICE> Controller EzloController#ezlo is now online.
                [latest-21342]2021-12-11T22:44:11.730Z <DynamicGroupController:ERR> DynamicGroupController#groups selector criterion invalid type, expecting object, got string (battery_power)
                [latest-21342]2021-12-11T22:44:11.731Z <DynamicGroupController:ERR> DynamicGroupController#groups error in selection for Group#groups>low_battery: Error: Invalid selector
                [latest-21342]2021-12-11T22:44:11.731Z <DynamicGroupController:CRIT> Error: Invalid selector
                Error: Invalid selector
                    at DynamicGroupController._select (/opt/reactor/server/lib/DynamicGroupController.js:314:23)
                    at DynamicGroupController._update_group (/opt/reactor/server/lib/DynamicGroupController.js:219:44)
                    at /opt/reactor/server/lib/DynamicGroupController.js:298:38
                    at Array.forEach (<anonymous>)
                    at DynamicGroupController._update (/opt/reactor/server/lib/DynamicGroupController.js:295:82)
                    at /opt/reactor/server/lib/DynamicGroupController.js:174:42
                    at processTicksAndRejections (node:internal/process/task_queues:96:5)
                [latest-21342]2021-12-11T22:44:11.732Z <app:NOTICE> Starting HTTP server and API...
                [latest-21342]2021-12-11T22:44:11.737Z <app:NOTICE> Starting Reaction Engine...
                [latest-21342]2021-12-11T22:44:11.737Z <Engine:INFO> Reaction Engine starting
                [latest-21342]2021-12-11T22:44:11.738Z <Engine:INFO> Checking rule sets...
                [latest-21342]2021-12-11T22:44:11.747Z <Engine:INFO> Checking rules...
                [latest-21342]2021-12-11T22:44:11.748Z <Engine:INFO> Data check complete; no corrections.
                

                -Reactor (Multi-hub) 26221-b25bb3e3
                -Docker on Synology NAS
                -HASS Docker 2026.8.1
                -ZWaveJS-UI 11.22.3
                -Update 16/08/2026

                1 Reply Last reply
                0
                • toggledbitsT Offline
                  toggledbitsT Offline
                  toggledbits
                  wrote on last edited by
                  #8

                  Well, we're looking for InfluxDB messages at the moment. Anything?

                  Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                  1 Reply Last reply
                  0
                  • N Offline
                    N Offline
                    noelab
                    wrote on last edited by noelab
                    #9

                    About InfluxDb I don't see any warn at startup

                    [latest-21342]2021-12-11T23:21:26.561Z <app:null> Reactor latest-21342-ead7ca9 starting on v16.11.1
                    [latest-21342]2021-12-11T23:21:26.562Z <app:INFO> Process ID 1; platform linux/x64 #42218 SMP Mon Oct 18 19:16:55 CST 2021; locale (undefined)
                    [latest-21342]2021-12-11T23:21:26.563Z <app:INFO> Basedir /opt/reactor; data in /var/reactor/storage
                    [latest-21342]2021-12-11T23:21:26.563Z <app:INFO> NODE_PATH=/opt/reactor
                    [latest-21342]2021-12-11T23:21:26.566Z <app:INFO> Configured locale (undefined); selected locale(s) en-US.UTF-8
                    [latest-21342]2021-12-11T23:21:26.588Z <app:INFO> Loaded locale en-US
                    [latest-21342]2021-12-11T23:21:26.597Z <Capabilities:null> Module Capabilities v21333
                    [latest-21342]2021-12-11T23:21:26.639Z <Plugin:null> Module Plugin v21186
                    [latest-21342]2021-12-11T23:21:26.644Z <TimerBroker:null> Module TimerBroker v21333
                    [latest-21342]2021-12-11T23:21:26.646Z <default:INFO> Module Entity v21334
                    [latest-21342]2021-12-11T23:21:26.650Z <Controller:null> Module Controller v21333
                    [latest-21342]2021-12-11T23:21:26.650Z <default:null> Module Structure v21338
                    [latest-21342]2021-12-11T23:21:26.658Z <default:null> Module Ruleset v21096
                    [latest-21342]2021-12-11T23:21:26.659Z <default:null> Module Rulesets v21096
                    [latest-21342]2021-12-11T23:21:26.667Z <GlobalExpression:null> Module GlobalExpression v21333
                    [latest-21342]2021-12-11T23:21:26.679Z <default:null> Module Rule v21337
                    [latest-21342]2021-12-11T23:21:26.683Z <GlobalReaction:null> Module GlobalReaction v21333
                    [latest-21342]2021-12-11T23:21:26.684Z <AlertManager:null> Module AlertManager v21333
                    [latest-21342]2021-12-11T23:21:26.685Z <default:null> Module Engine v21342
                    [latest-21342]2021-12-11T23:21:26.685Z <default:null> Module httpapi v21333
                    [latest-21342]2021-12-11T23:21:26.687Z <default:null> Module httpproxy v21333
                    [latest-21342]2021-12-11T23:21:26.702Z <default:null> Module wsapi v21334
                    [latest-21342]2021-12-11T23:21:26.703Z <app:NOTICE> Starting Structure...
                    [latest-21342]2021-12-11T23:21:26.740Z <InfluxFeed:null> Module InfluxFeed v21333
                    [latest-21342]2021-12-11T23:21:26.742Z <Structure:INFO> Structure#1 starting plugin influx (InfluxFeed)
                    [latest-21342]2021-12-11T23:21:26.743Z <Structure:INFO> Structure#1 loading controller interface vera (VeraController)
                    [latest-21342]2021-12-11T23:21:26.752Z <VeraController:null> Module VeraController v21334
                    [latest-21342]2021-12-11T23:21:26.757Z <Structure:INFO> Structure#1 loading controller interface ezlo (EzloController)
                    [latest-21342]2021-12-11T23:21:26.769Z <EzloController:null> Module EzloController v21324
                    [latest-21342]2021-12-11T23:21:26.772Z <EzloController:null> EzloController#ezlo created, config { "source": "wss://10.0.4.119:17000", "serial": "90000464" }
                    [latest-21342]2021-12-11T23:21:26.772Z <EzloController:null> EzloController#ezlo instance log level (null) (4)
                    [latest-21342]2021-12-11T23:21:26.773Z <Structure:INFO> Structure#1 loading controller interface groups (DynamicGroupController)
                    [latest-21342]2021-12-11T23:21:26.777Z <DynamicGroupController:null> Module DynamicGroupController v21334
                    [latest-21342]2021-12-11T23:21:26.779Z <Structure:INFO> Structure#1 loading controller interface weather (OWMWeatherController)
                    [latest-21342]2021-12-11T23:21:26.783Z <OWMWeatherController:null> Module OWMWeatherController v21313
                    [latest-21342]2021-12-11T23:21:26.785Z <Structure:INFO> Structure#1 loading controller interface reactor_system (SystemController)
                    [latest-21342]2021-12-11T23:21:26.788Z <SystemController:null> Module SystemController v21342
                    [latest-21342]2021-12-11T23:21:26.790Z <Structure:INFO> Starting controller VeraController#vera
                    [latest-21342]2021-12-11T23:21:26.790Z <VeraController:NOTICE> VeraController#vera starting
                    [latest-21342]2021-12-11T23:21:26.835Z <VeraController:INFO> VeraController#vera loaded mapping ver 21301 rev 1 format 1 notice 
                    [latest-21342]2021-12-11T23:21:26.837Z <VeraController:INFO> VeraController: deviceclass room capability sys_group does not provide attribute members
                    [latest-21342]2021-12-11T23:21:26.837Z <VeraController:INFO> VeraController: deviceclass room capability sys_group does not provide attribute empty
                    [latest-21342]2021-12-11T23:21:26.838Z <VeraController:INFO> VeraController: deviceclass vera_system_object capability sys_system does not provide attribute state
                    [latest-21342]2021-12-11T23:21:26.850Z <Structure:INFO> Starting controller EzloController#ezlo
                    [latest-21342]2021-12-11T23:21:26.863Z <EzloController:INFO> EzloController#ezlo device mapping data loaded; checking...
                    [latest-21342]2021-12-11T23:21:26.866Z <EzloController:INFO> EzloController#ezlo performing hub login without cloud authentication (hub.offline.anonymous_access must be enabled)
                    [latest-21342]2021-12-11T23:21:26.867Z <Structure:INFO> Starting controller DynamicGroupController#groups
                    [latest-21342]2021-12-11T23:21:26.869Z <DynamicGroupController:NOTICE> Controller DynamicGroupController#groups is now online.
                    [latest-21342]2021-12-11T23:21:26.870Z <Structure:INFO> Starting controller OWMWeatherController#weather
                    [latest-21342]2021-12-11T23:21:26.896Z <Structure:INFO> Starting controller SystemController#reactor_system
                    [latest-21342]2021-12-11T23:21:26.897Z <SystemController:NOTICE> Controller SystemController#reactor_system is now online.
                    [latest-21342]2021-12-11T23:21:26.921Z <EzloController:INFO> EzloController#ezlo opening hub connection to "90000464" at wss://10.0.4.119:17000
                    [latest-21342]2021-12-11T23:21:26.922Z <EzloController:NOTICE> EzloController#ezlo connecting via WS to wss://10.0.4.119:17000
                    [latest-21342]2021-12-11T23:21:26.928Z <app:INFO> Structure running; pausing for controllers' initial ready
                    [latest-21342]2021-12-11T23:21:27.062Z <EzloController:INFO> EzloController#ezlo hub websocket connected (wss://10.0.4.119:17000)
                    [latest-21342]2021-12-11T23:21:27.062Z <EzloController:INFO> EzloController#ezlo hub websocket connected; inventory hub...
                    [latest-21342]2021-12-11T23:21:27.114Z <EzloController:INFO> EzloController#ezlo hub "90000464" is h2.1 (undefined) firmware "2.0.21.1785.1"
                    [latest-21342]2021-12-11T23:21:27.151Z <OWMWeatherController:INFO> OWMWeatherController#weather done; 1 locations, 0 failed
                    [latest-21342]2021-12-11T23:21:27.152Z <OWMWeatherController:NOTICE> Controller OWMWeatherController#weather is now online.
                    [latest-21342]2021-12-11T23:21:27.396Z <VeraController:NOTICE> Controller VeraController#vera is now online.
                    

                    -Reactor (Multi-hub) 26221-b25bb3e3
                    -Docker on Synology NAS
                    -HASS Docker 2026.8.1
                    -ZWaveJS-UI 11.22.3
                    -Update 16/08/2026

                    1 Reply Last reply
                    0
                    • toggledbitsT Offline
                      toggledbitsT Offline
                      toggledbits
                      wrote on last edited by
                      #10

                      OK. Thanks for uploading the logs and data. It looks like I made an error in the parsing of attribute lists. But, I think there's an easy workaround for you until I get a fix out... just change select_capabilities to default_capabilities. No other changes needed, I think.

                      Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                      1 Reply Last reply
                      0
                      • N Offline
                        N Offline
                        noelab
                        wrote on last edited by
                        #11

                        Thanks to you!
                        The fix is working.
                        Now I can truck energy consuption on Influxdb. The idea is to try to make in MSR what in HA is doing with utility_meter, Trend and Lovelace UI togheter. Maybe in future we will see a standard MSR energy plugin too.

                        Home Assistant

                        Utility Meter

                        Utility Meter

                        Instructions on how to integrate the Utility Meter into Home Assistant.

                        Home Assistant

                        Trend

                        Trend

                        Instructions on how to integrate Trend binary sensors into Home Assistant.

                        -Reactor (Multi-hub) 26221-b25bb3e3
                        -Docker on Synology NAS
                        -HASS Docker 2026.8.1
                        -ZWaveJS-UI 11.22.3
                        -Update 16/08/2026

                        1 Reply Last reply
                        1
                        • toggledbitsT toggledbits locked this topic on
                        Reply
                        • Reply as topic
                        Log in to reply
                        • Oldest to Newest
                        • Newest to Oldest
                        • Most Votes


                        Recent Topics

                        • [MSR] Rule do not fire
                          therealdbT
                          therealdb
                          0
                          3
                          39

                        • Rule condition shows TRUE in UI but Rule never transitions to SET — survives full restart
                          N
                          noelab
                          0
                          8
                          142

                        • DynamicGroupController and attributes
                          toggledbitsT
                          toggledbits
                          1
                          9
                          285

                        • Reactor (Multi-System/Multi-Hub) Announcements
                          toggledbitsT
                          toggledbits
                          5
                          149
                          137.3k

                        • Unofficial thread for compatibility
                          tunnusT
                          tunnus
                          2
                          2
                          728

                        • Ooops - Deleted Reactor Ex Machina II
                          toggledbitsT
                          toggledbits
                          0
                          2
                          84

                        • Bail out of failed reaction?
                          T
                          tamorgen
                          0
                          3
                          126

                        • Arming Envisalink panel from MSR
                          T
                          tamorgen
                          0
                          7
                          357

                        • [Solved] DynamicGroupController updating members issue
                          CrilleC
                          Crille
                          0
                          5
                          251

                        • Upgrade Issues
                          T
                          tbully
                          0
                          9
                          383

                        • [SOLVED] Conflicting Set Reaction Groups Appear to Fire Simultaneously in Single Rule Evaluation
                          toggledbitsT
                          toggledbits
                          0
                          10
                          496

                        • [SOLVED] Question regarding "in" vs "contains" vs contents of the string
                          G
                          gwp1
                          0
                          5
                          252
                        Powered by NodeBB | Contributors
                        Hosted freely by 10RUPTiV - Solutions Technologiques | Contact us
                        • Login

                        • Don't have an account? Register

                        • Login or register to search.
                        • First post
                          Last post
                        0
                        • Categories
                        • Recent
                        • Tags
                        • Popular
                        • Unsolved