I'm trying to allow anonymous access from a local network to /api/v1/log, but the problem now with the reverse proxy configuration is that this access is open via proxy to the internet. At least I wasn't able to configure ACL so that only an access from a local network would be permitted.
reactor.yaml:
baseurl: "http://192.168.1.12:8111"
proxy_baseurl: "https://external.com:30000"
trusted_proxy: "192.168.1.12"
Local traffic would originate from 192.168.1.0/24 network. Synology is acting as a reverse proxy and hosting MSR as a docker container (which has its own network and IP 172.18.0.5). MSR build is latest-26298-fbb75fb8
users.yaml:
- url: "/api/v1/log"
method: "GET"
source_ip: 172.18.0.0/24
allow: true
Using the above ACL works, but it enables access via proxy also. If I use source_ip: 192.168.1.0/24, then it doesn't work either locally or remotely. So I'm kinda lost what should I use as source_ip in this case?
I've seen many of you using Dynamic Group Controller. I'm using it myself for monitoring device battery levels. I've read and re-read the Dynamic Group Controller docs and still cannot come to an answer for my question so let me paint my scenario:
I've migrated from EchoSpeaks in Hubitat ('cause borked and seemingly unmaintained) to Alexa Devices in Home Assistant ('cause not borked in 2026.11.0) to be able to send TTS to my Echo devices.
In EchoSpeaks I could create groups. Sweet.
In Alexa Devices I don't seem to be able to do so. As such, my thought was "wait - isn't there a way in MSR?"
Is this an effective scenario that Dynamic Group Controller can be used for?
Build 21228 has been released. Docker images available from DockerHub as usual, and bare-metal packages here.
Home Assistant up to version 2021.8.6 supported; the online version of the manual will now state the current supported versions;
Fix an error in OWMWeatherController that could cause it to stop updating;
Unify the approach to entity filtering on all hub interface classes (controllers); this works for device entities only; it may be extended to other entities later;
Improve error detail in messages for EzloController during auth phase;
Add isRuleSet() and isRuleEnabled() functions to expressions extensions;
Implement set action for lock and passage capabilities (makes them more easily scriptable in some cases);
Fix a place in the UI where 24-hour time was not being displayed.
I'm trying to use MSR via reserve proxy in Synology DSM, but MSR page does not load
https://<public ip>:30000/reactor/en-US/
At the same time logging page loads normally
https://<public ip>:30000/api/v1/log
I thought maybe authentication was messing it up, but there was no deny entries in the log, and also disabling authentication did not make any difference. For this use case VPN is not an option (that works, but as said not an option for this particular use case).
Any ideas what could cause this? MSR build latest-26242-28d69aa8, Chrome browser
Nothing more to add. I see we have hvac_blower, but, anyway, maybe a native fan on the same assumptions of the fan from HASS could be reasonable.
I have a couple of them. ie, this is from ESPHome via HASS.
x_hass.domain="fan"
x_hass.entity_id="fan.kitchen_seashell_hood_ventilation_fan"
x_hass.floor_id=null
x_hass.services=["fan","esphome"]
x_hass.source="esphome"
x_hass.state="off"
x_hass_attr.friendly_name="Seashell Hood Ventilation Fan"
x_hass_attr.percentage=50
x_hass_attr.percentage_step=25
x_hass_attr.preset_mode=""
x_hass_attr.preset_modes=[]
x_hass_attr.supported_features=49
Thanks.
Build: latest-26221-b25bb3e3, Docker on Synology.
Hi, I have a Rule whose Trigger/Constraints reference other Rules via Rule State ... is TRUE. At some point it stops firing.
Expanding the rule's condition tree in the UI shows every Trigger and Constraint condition green/TRUE — confirmed live by walking into the room and watching Motion go true in real time. Rule History shows no new SET, just old reset entries.
Tried, on the same rule, same evening: recreating the trigger conditions with fresh IDs, recreating the constraint conditions with fresh IDs (flat and wrapped in a new Group — wrapping in a Group produced one SET, but it didn't reproduce on repeat attempts with the same structure), and finally a full container restart with a verified-correct saved rule. Still no SET, even with a fresh live motion event right after the restart.
Separately, I found that this rule (and its 10 per-room clones) share identical internal condition/group IDs with each other — leftover from a batch clone done months ago, never regenerated. Not sure if that's related, since fixing the IDs didn't reliably fix the symptom either.
Has anyone seen a Rule State condition show TRUE in the UI without the Rule ever producing a SET, surviving a clean restart?
Thanks in advance
Hey @toggledbits I'm back to trying to optimize a couple of things based on dynamic group.
First of all, I think I found a typo in the doc:
primary_attribute: "binary_sensor.state"
primary_attribute_value: |
d = false;
each id in members: d = getEntity(id)?.attributes?.power_switch?.state or d,
d
I think the correct code snippet is d = false,
All that said, my use case for dynamic groups is to group 3 different climate devices, so I could easily command them at the same time. Commands are good, but sometimes I want to check if any of the devices are on, and that's easily done with a similar snippet as the one you have in the docs. But this is limited to the primary attribute, while I want to have any of the attributes in the group to be driven by a similar logic (while all are null in the group). ie, access hvac_control.mode and see if any of the unit is set to cool, or heat. Is that possible, without re-defining an expression in each of my rules? Thanks!
As there are statements about compatibility for home assistant versions in MSR new version announcements (e.g. "HassController: Bless Hass to 2025.7.3"), I thought it would be good idea to track other controllers as well.
As an example, I can confirm that build "latest-25208-c53e8513" works with Hubitat Elevation C-8 platform version 2.4.2.134 using Maker API.
Updates: (the latest versions first in the list)
OK: build "latest-25264-2fbe9217" with Hubitat C-8 platform v. 2.4.3.123
Edit: Solved in latest-26221.
Bare-metal latest-26193
I have this group:
"OKforLarm":
name: OK för Larm
select:
- include_controller: vera
- include_capability: door_sensor
filter_expression: entity.attributes.door_sensor.state
It contains the entities I expect but behaves a bit odd. When I open vera>device_10097 the entity attribute door_sensor.state changes to true but it won't show up as member in the group, when I also open vera>device_10095 they both shows as members and when I close vera>device_10095 it disappear from the group but when I close vera>device_10097 it lingers in the group until I restart Reactor.
npm ERR! code EBADPLATFORM reactor 20022
Multi-System Reactor
2
Posts
2
Posters
1.4k
Views
1
Watching
-
i get the following error when i run
~/reactor $ npm i --no-save --omit dev
Reactor is running and i see no ill effects so far
Thought i would report for info.~/reactor $ npm i --no-save --omit dev npm ERR! code EBADPLATFORM npm ERR! notsup Unsupported platform for inotify@1.4.6: wanted {"os":"linux","arch":"any"} (current: {"os":"android","arch":"arm"}) npm ERR! notsup Valid OS: linux npm ERR! notsup Valid Arch: any npm ERR! notsup Actual OS: androidand here is log for more info
0 info it worked if it ends with ok 1 verbose cli [ 1 verbose cli '/data/data/com.termux/files/usr/bin/node', 1 verbose cli '/data/data/com.termux/files/usr/bin/npm', 1 verbose cli 'i', 1 verbose cli '--no-save', 1 verbose cli '--omit', 1 verbose cli 'dev' 1 verbose cli ] 2 info using npm@6.14.10 3 info using node@v14.15.4 4 verbose npm-session e65bf5b70b2ee3fd 5 silly install loadCurrentTree 6 silly install readLocalPackageData 7 http fetch GET 200 https://registry.npmjs.org/dev 1079ms 8 http fetch GET 200 https://registry.npmjs.org/dev/-/dev-0.1.3.tgz 161ms 9 silly pacote tag manifest for dev@latest fetched in 1336ms 10 timing stage:loadCurrentTree Completed in 2965ms 11 silly install loadIdealTree 12 silly install cloneCurrentTreeToIdealTree 13 timing stage:loadIdealTree:cloneCurrentTree Completed in 11ms 14 silly install loadShrinkwrap 15 timing stage:loadIdealTree:loadShrinkwrap Completed in 316ms 16 silly install loadAllDepsIntoIdealTree 17 silly resolveWithNewModule dev@0.1.3 checking installable status 18 http fetch GET 200 https://registry.npmjs.org/inotify 788ms 19 http fetch GET 200 https://registry.npmjs.org/inotify/-/inotify-1.4.6.tgz 796ms 20 silly pacote range manifest for inotify@>= 0.1.6 fetched in 1636ms 21 silly resolveWithNewModule inotify@1.4.6 checking installable status 22 timing stage:rollbackFailedOptional Completed in 2ms 23 timing stage:runTopLevelLifecycles Completed in 4975ms 24 verbose stack Error: Unsupported platform for inotify@1.4.6: wanted {"name":"inotify","version":"1.4.6","engines":{"node":">=0.8"},"os":["linux"],"dependencies":{"bindings":"^1.3.1","nan":"^2.12.1"},"optionalDependencies":{},"peerDependenciesMeta":{},"devDependencies":{},"bundleDependencies":false,"peerDependencies":{},"deprecated":false,"_resolved":"https://registry.npmjs.org/inotify/-/inotify-1.4.6.tgz","_integrity":"sha512-WW8/uqIA04O3AePQVe/Ms3ZLR0yGamaz8YOEpaXc4WBAGOPZfzu58wWErEPSUYaPyDrJRIeCn6PEIQgC1ZyQ5w==","_shasum":"c5a51852df1647d1a589d46c4baa2771ed36b8d2","_shrinkwrap":null,"_id":"inotify@1.4.6","_from":"inotify@>= 0.1.6","_requested":{"type":"range","registry":true,"raw":"inotify@>= 0.1.6","name":"inotify","escapedName":"inotify","rawSpec":">= 0.1.6","saveSpec":null,"fetchSpec":">= 0.1.6"},"_spec":"inotify@>= 0.1.6","_where":"/data/data/com.termux/files/home/reactor/node_modules/dev"} (current: {"os":"android","cpu":"arm"}) 24 verbose stack at checkPlatform (/data/data/com.termux/files/usr/lib/node_modules/npm/node_modules/npm-install-checks/index.js:46:14) 24 verbose stack at thenWarnEngineIssues (/data/data/com.termux/files/usr/lib/node_modules/npm/lib/install/validate-args.js:63:5) 24 verbose stack at /data/data/com.termux/files/usr/lib/node_modules/npm/node_modules/iferr/iferr.js:3:64 24 verbose stack at checkEngine (/data/data/com.termux/files/usr/lib/node_modules/npm/node_modules/npm-install-checks/index.js:25:10) 24 verbose stack at module.exports.isInstallable (/data/data/com.termux/files/usr/lib/node_modules/npm/lib/install/validate-args.js:60:3) 24 verbose stack at resolveWithNewModule (/data/data/com.termux/files/usr/lib/node_modules/npm/lib/install/deps.js:677:10) 24 verbose stack at /data/data/com.termux/files/usr/lib/node_modules/npm/lib/install/deps.js:600:7 24 verbose stack at /data/data/com.termux/files/usr/lib/node_modules/npm/node_modules/iferr/iferr.js:3:64 24 verbose stack at /data/data/com.termux/files/usr/lib/node_modules/npm/node_modules/call-limit/call-limit.js:28:43 24 verbose stack at processTicksAndRejections (internal/process/task_queues.js:75:11) 25 verbose pkgid inotify@1.4.6 26 verbose cwd /data/data/com.termux/files/home/reactor 27 verbose Linux 4.9.76 28 verbose argv "/data/data/com.termux/files/usr/bin/node" "/data/data/com.termux/files/usr/bin/npm" "i" "--no-save" "--omit" "dev" 29 verbose node v14.15.4 30 verbose npm v6.14.10 31 error code EBADPLATFORM 32 error notsup Unsupported platform for inotify@1.4.6: wanted {"os":"linux","arch":"any"} (current: {"os":"android","arch":"arm"}) 33 error notsup Valid OS: linux 33 error notsup Valid Arch: any 33 error notsup Actual OS: android 33 error notsup Actual Arch: arm 34 verbose exit [ 1, true ]Depandencies
{"dependencies": { "@influxdata/influxdb-client": "^1.18.0", "@mdi/font": "^5.9.55", "body-parser": "^1.19.0", "bootstrap": "4.6.0", "bootstrap-icons": "1.5.0", "cookie": "^0.4.1", "digest-fetch": "^1.2.1", "diskusage-ng": "^1.0.1", "express": "^4.17.1", "feather-icons": "^4.28.0", "font-awesome": "^4.7.0", "gridstack": "^5.0.0", "jquery": "3.6.0", "jquery-ui-dist": "1.12.1", "js-yaml": "^3.14.1", "node-fetch": "^2.6.7", "nodemailer": "^6.5.0", "qs": "^6.10.1", "serve-static": "^1.14.1", "uuid": "^8.3.2", "ws": "^7.5.6" } -
Looks like a dependency of one of the dependent packages doesn't have an Android implementation. Sorry, mate. Nothing I can do about that. You've been riding the bleeding edge with your setup, and it finally cut.
