Skip to content
  • Categories
  • Recent
  • Tags
  • Popular
  • Unsolved
Collapse
Discussion Forum to share and further the development of home control and automation, independent of platforms.
  1. Home
  2. Software
  3. Multi-System Reactor
  4. Urgent Help MSR stopped running
Copying a global reaction
tunnusT
With build 25328, if you copy a global reaction, a new reaction does not appear in the UI unless you do a refresh. I recall this used to work without needing this page refresh? Anyway, only a minor nuisance.
Multi-System Reactor
[Reactor] Bug when sending MQTT boolean payloads
therealdbT
Topic thumbnail image
Multi-System Reactor
Difficulty defining repeating annual period
R
I have tried numerous ways to define a recurring annual period, for example from December 15 to January 15. No matter which method I try - after and before, between, after and/not after, Reactor reports "waiting for invalid date, invalid date. Some constructs also seem to cause Reactor to hang, timeout and restart. For example "before January 15 is evaluated as true, but reports "waiting for invalid date, invalid date". Does anyone have a tried and true method to define a recurring annual period? I think the "between" that I used successfully in the past may have broken with one of the updates.
Multi-System Reactor
Need help with sequence
T
Good evening all, For about the past week or so, I've been having problems with a specific rule in my home automation that controls when my home goes from an Away mode to Home mode. One of the conditions it checked for was my alarm panel, when it changed from Armed Away to Disarmed. There seems to have been a firmware update on the panel that added an intermittent step of "pending", and I can't say for certain it happens 100% of the time. Is there a way to write a condition that so it changes from one condition, to the next, and then another condition? As in, Home alarm changes from armed_away to pending to disarmed. Thanks.
Multi-System Reactor
Possible feature request?
CatmanV2C
No idea how easy this would be. During my migration away from Z-wave I've been replacing the Z-wave devices with Sonoff which has broken some of my automations. Any chance of a 'Test Reaction' function to call out which ones are broken because an entity no longer exists? Without actually running the reaction? Or does this exist already and I'm just not aware of how to do it? Obviously I can see entities that are no longer available, but not quite what I'm looking for. I guess it's something of an edge case so no huge issue. TIA! C
Multi-System Reactor
Logic Assistance: Exterior Lights on when Illuminance Below Threshold
PablaP
Topic thumbnail image
Multi-System Reactor
Time series documentation
tunnusT
Is the current manual (incl. examples) up to date with how retention value is handled in time series configuration? Referring to this post
Multi-System Reactor
MQTT templates for ZIgbee scene controller, or a better way?
CatmanV2C
Topic thumbnail image
Multi-System Reactor
Reset a delay
CatmanV2C
I'm sure this has been asked, and answered, but damned if I can figure it out Use case: I have a rear garden with lights. A door from the kitchen into the garden and a door from the garage. Currently if I open the kitchen door the lights come on (yay) and a 3 minute delay starts. After 3 minutes, no matter what else happens, the lights go off (Boo! But also yay!) What I would like is for the 3 minute delay until the lights go off to start from the latest door open event. That is, if I'm going from kitchen to garage, and back again, the lights stay on until there's three minutes of no activity. I've tried 'hacking' with a virtual switch, but can't seem to stop the delay. Any pointers? TIA C
Multi-System Reactor
Reactor Loading Screen Safari
S
Topic thumbnail image
Multi-System Reactor
Constraints states visually do not match actual
S
Topic thumbnail image
Multi-System Reactor
[MSR] Feature request: For Each action on arrays/groups
therealdbT
Topic thumbnail image
Multi-System Reactor
[Solved] Error: Command timeout
G
at _ClientAPI._commandTimeout (http://192.168.1.100:8111/client/ClientAPI.js:807:179 Seeing this randomly when returning to open browser tab after being away awhile. Once, maybe twice a day. "What did you do to trigger it?" Literally nothing, just walked away and returned and there it was. Actions taken in reasonably close proximity to this particular instance of it popping up: I'd restarted the MSR container in Portainer. I'll try to grab some logs here shortly.
Multi-System Reactor
Issue with MSR UI becoming unresponsive
S
I'm having an issue with MSR's UI being very unresponsive. It started happening a couple days ago and I didn't make any changes that would have caused this except adding some meross lan devices in HA. When I go into an entity action and use the search functionality, it usually will start filtering and then get to a place after a few letters are entered where it will take 30 seconds or more (sometimes minutes) for the UI to show what I am typing. During this time MSR ui is completely unresponsive. I've tried multiple browsers and multiple computers. HA and MSR are both deployed in docker. I have run HTOP on the host and when the problem happens there are no CPU/Memory spikes at all. From a functionality standpoint MSR is working perfectly. This seems to be an UI issue only. Do i need to ditch Docker and run MSR on a Proxmox VM? I have both stand alone Docker and Proxmox environments. I dont mind doing that I just want to be able to use the UI again... Installation method Home Assistant Container Core 2025.7.3 Frontend 20250702.3 nothing crazy in the logs except some openweather map stuff that doesn't make any sense as it is working fine in MSR Any help would be greatly appreciated Reactor latest-25328-b2ed1365 app 25328 configuration from /var/reactor/config NODE_PATH /opt/reactor:/opt/reactor/node_modules [latest-25328]2025-11-30T20:01:53.843Z <app:null> Reactor build latest-25328-b2ed1365 starting on v24.11.1 /usr/local/bin/node [latest-25328]2025-11-30T20:01:53.844Z <app:null> Process ID 1 user/group 0/0; docker; platform linux/x64 #161-Ubuntu SMP Tue Jul 22 14:25:40 UTC 2025; locale (undefined) [latest-25328]2025-11-30T20:01:53.844Z <app:null> Basedir /opt/reactor; data in /var/reactor/storage [latest-25328]2025-11-30T20:01:53.844Z <app:null> NODE_PATH=/opt/reactor:/opt/reactor/node_modules [latest-25328]2025-11-30T20:01:53.865Z <app:null> Resolved timezone=America/New_York, environment TZ=America/New_York; offset minutes from UTC=-300 [latest-25328]2025-11-30T20:01:53.867Z <default:null> Module i18n v25141 [latest-25328]2025-11-30T20:01:53.867Z <app:null> Configured locale (undefined); selected locale(s) en-US.UTF-8 [latest-25328]2025-11-30T20:01:53.879Z <app:null> Loaded locale en-US for en-US [latest-25328]2025-11-30T20:01:53.879Z <app:null> Local date/time using configured timezone and locale formatting is "11/30/2025, 3:01:53 PM" [latest-25328]2025-11-30T20:01:53.889Z <Structure:null> Module Structure v25326 [latest-25328]2025-11-30T20:01:53.890Z <Capabilities:null> Module Capabilities v24312 [latest-25328]2025-11-30T20:01:53.904Z <Plugin:null> Module Plugin v25141 [latest-25328]2025-11-30T20:01:53.923Z <Timer:null> Module Timer v25279 [latest-25328]2025-11-30T20:01:53.924Z <TimerBroker:null> Module TimerBroker v25314 [latest-25328]2025-11-30T20:01:53.927Z <Entity:null> Module Entity v25251 [latest-25328]2025-11-30T20:01:53.929Z <Controller:null> Module Controller v25253 [latest-25328]2025-11-30T20:01:53.930Z <AlertManager:null> Module AlertManager v25318 [latest-25328]2025-11-30T20:01:53.937Z <default:null> Module Ruleset v25283 [latest-25328]2025-11-30T20:01:53.937Z <default:null> Module Rulesets v25141 [latest-25328]2025-11-30T20:01:53.942Z <GlobalExpression:null> Module GlobalExpression v25258 [latest-25328]2025-11-30T20:01:53.953Z <Predicate:null> Module Predicate v25328 [latest-25328]2025-11-30T20:01:53.956Z <Rule:null> Module Rule v25323 [latest-25328]2025-11-30T20:01:53.958Z <GlobalReaction:null> Module GlobalReaction v25292 [latest-25328]2025-11-30T20:01:53.959Z <Engine:null> Module Engine v25325 [latest-25328]2025-11-30T20:01:53.964Z <httpapi:null> Module httpapi v25328 [latest-25328]2025-11-30T20:01:53.972Z <wsapi:null> Module wsapi v25328 [latest-25328]2025-11-30T20:01:53.994Z <TaskQueue:null> Module TaskQueue 24138 [latest-25328]2025-11-30T20:01:53.994Z <VeraController:null> Module VeraController v25141 [latest-25328]2025-11-30T20:01:54.179Z <HassController:null> Module HassController v25325 [latest-25328]2025-11-30T20:02:13.797Z <OWMWeatherController:null> Module OWMWeatherController v25268 [latest-25328]2025-11-30T20:02:13.800Z <SystemController:null> Module SystemController v25323 [latest-25328]2025-11-30T20:02:13.807Z <MQTTController:null> Module MQTTController v22092 [latest-25328]2025-11-30T20:02:20.630Z <OWMWeatherController:CRIT> FetchError: request to https://api.openweathermap.org/data/2.5/weather?lat=xxxxxxxxxx&lon=-xxxxxxxxx&appid=xxxxxxxxxxxxxxxxxxxxxxxxxx&units=standard&_r=1xxxxxxxxxxxxxxfailed, reason: [-] FetchError: request to https://api.openweathermap.org/data/2.5/weather?lat=xxxxxxxxxxx&lon=-xxxxxxxxxxxxxxxxxx&appid=xxxxxxxxxxxxxxxxxxx&units=standard&_r=xxxxxxxxxxxxxxxfailed, reason: at ClientRequest.<anonymous> (/opt/reactor/node_modules/node-fetch/lib/index.js:1501:11) at ClientRequest.emit (node:events:508:28) at ClientRequest.emit (node:domain:489:12) at emitErrorEvent (node:_http_client:108:11) at TLSSocket.socketErrorListener (node:_http_client:575:5) at TLSSocket.emit (node:events:508:28) at TLSSocket.emit (node:domain:489:12) at emitErrorNT (node:internal/streams/destroy:170:8) at emitErrorCloseNT (node:internal/streams/destroy:129:3) at processTicksAndRejections (node:internal/process/task_queues:89:21
Multi-System Reactor
Date/time condition
tunnusT
Topic thumbnail image
Multi-System Reactor
Device log?
G
@toggledbits is there a log that will show me what rule is turning on a specific device? I've got a switch that has been kicking on at 2200 ET for several nights now and the reactor.log doesn't have a thing in it that I can see on a device level (it being more rules-based).
Multi-System Reactor
Midnight crossing not working in date/time condition (build 25325)
tunnusT
Topic thumbnail image
Multi-System Reactor
Reactor (Multi-System/Multi-Hub) Announcements
toggledbitsT
Build 21228 has been released. Docker images available from DockerHub as usual, and bare-metal packages here. Home Assistant up to version 2021.8.6 supported; the online version of the manual will now state the current supported versions; Fix an error in OWMWeatherController that could cause it to stop updating; Unify the approach to entity filtering on all hub interface classes (controllers); this works for device entities only; it may be extended to other entities later; Improve error detail in messages for EzloController during auth phase; Add isRuleSet() and isRuleEnabled() functions to expressions extensions; Implement set action for lock and passage capabilities (makes them more easily scriptable in some cases); Fix a place in the UI where 24-hour time was not being displayed.
Multi-System Reactor
[Solved] Local expression in Rule does not evaluate as they used to do
CrilleC
Topic thumbnail image
Multi-System Reactor
Home Assistant 2025.11.2 and latest-25315
CrilleC
Topic thumbnail image
Multi-System Reactor

Urgent Help MSR stopped running

Scheduled Pinned Locked Moved Multi-System Reactor
38 Posts 3 Posters 6.0k Views 3 Watching
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • K Offline
    K Offline
    kfxo
    wrote on last edited by
    #3

    Maybe the logs will have a clue? The other day I moved HA to a new computer and MSR was trying to connect to the old machine and MSR would not load. Sure enough the logs indicated that MSR could not connect to HA. Fixed that and all was well.

    1 Reply Last reply
    0
    • cw-kidC Offline
      cw-kidC Offline
      cw-kid
      wrote on last edited by cw-kid
      #4

      I think you might be onto the right thing. I looked in to the log and it was complaining it can't connect to the InfluxDB running on another Raspberry Pi. That Pi has gone down at the moment and I can't connect to it for some reason.

      I don't know when the Pi went down? Might have been last week for all I know or this evening, I am not sure. So may or may not be related.

      So I edited the Reactor.yaml file and commented out all lines to do with the InfluxDB plugin and rebooted the Debian Linux box where MSR is running, but MSR is also still down and not accessible.

      1 Reply Last reply
      0
      • cw-kidC Offline
        cw-kidC Offline
        cw-kid
        wrote on last edited by
        #5

        This is the reactor.service file I haven't changed anything in there.

        [Unit]
        Description=Multi System Reactor
        After=network.target
        
        [Service]
        Type=simple
        User=stuart
        Environment=NODE_PATH=/home/stuart/reactor
        WorkingDirectory=/home/stuart/reactor
        ExecStart=/usr/bin/node app -p
        Restart=on-failure
        RestartSec=5s
        
        [Install]
        WantedBy=multi-user.target
        

        If I run these commands:

        sudo systemctl stop reactor

        and then

        sudo systemctl start reactor

        and then

        systemctl --type=service

        It still says that the reactor service is "activating"

        reactor.service loaded activating auto-restart Multi System Reactor
        
        1 Reply Last reply
        0
        • K Offline
          K Offline
          kfxo
          wrote on last edited by
          #6

          The logs dont say anything else? If not I dont know and you might have to wait for @toggledbits

          1 Reply Last reply
          0
          • cw-kidC Offline
            cw-kidC Offline
            cw-kid
            wrote on last edited by
            #7

            The timestamps in the logs don't seem to match the actual time here now, so I am having issues working out what is new or not in the logs.

            1 Reply Last reply
            0
            • cw-kidC Offline
              cw-kidC Offline
              cw-kid
              wrote on last edited by cw-kid
              #8

              I guess MSR is not currently logging as its down. The last line in the log is this at 16:16 pm which was 4 hours ago.

              [latest-22053]2022-03-18T16:16:32.655Z InfluxFeed:ERR [InfluxFeed]InfluxFeed#influx write failed (data lost): [Error]Er

              And there was lost of these lines:

              [latest-22053]2022-03-18T16:16:29.947Z InfluxFeed:ERR [InfluxFeed]InfluxFeed#influx write failed (data lost): [Error]Error: connect ECONNREFUSED 192.168.0.36:8086

              But I don't know when the Pi went down? and the InfluxDB so may or may not be related.

              1 Reply Last reply
              0
              • K Offline
                K Offline
                kfxo
                wrote on last edited by
                #9

                Not sure what else to try as you already commented out the Influx. Maybe back up your MSR files and try a fresh install.

                1 Reply Last reply
                0
                • toggledbitsT Offline
                  toggledbitsT Offline
                  toggledbits
                  wrote on last edited by toggledbits
                  #10

                  Troubleshooting section of the manual.

                  My guess is (a) some hub isn't connecting and you didn't wait long enough for retries to time out (most common, but not only reason), and then you damaged the config file trying to edit out InfluxDB, which won't get in the way, it's just chatty. Follow the steps in the docs. Also, If you installed node-red after MSR, there is a bug in their install script that can corrupt your nodejs install system-wide. Hopefully it's not that. Back on Monday. Good luck!

                  Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                  1 Reply Last reply
                  0
                  • cw-kidC Offline
                    cw-kidC Offline
                    cw-kid
                    wrote on last edited by
                    #11

                    Initially I commented out all the plugin lines in the reactor.yaml file. After that didn't work I just deleted the entire plugins section from the file and that didn't work either.

                    1 Reply Last reply
                    0
                    • cw-kidC Offline
                      cw-kidC Offline
                      cw-kid
                      wrote on last edited by
                      #12

                      Can't remember if I installed Node-Red or MSR first. Node-Red has been on this Linux Debian box along with MSR since day 1 when I first set it up.

                      1 Reply Last reply
                      0
                      • cw-kidC Offline
                        cw-kidC Offline
                        cw-kid
                        wrote on last edited by
                        #13

                        I took a copy of the reactor.yaml file before I edited it, I just restored that and reboot and its still down in the browser.

                        1 Reply Last reply
                        0
                        • toggledbitsT Offline
                          toggledbitsT Offline
                          toggledbits
                          wrote on last edited by
                          #14

                          Again, follow the steps in the Troubleshooting section of the docs.

                          Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                          cw-kidC 1 Reply Last reply
                          0
                          • toggledbitsT toggledbits

                            Again, follow the steps in the Troubleshooting section of the docs.

                            cw-kidC Offline
                            cw-kidC Offline
                            cw-kid
                            wrote on last edited by cw-kid
                            #15

                            @toggledbits

                            I am trying to download the log files from the /var/log folder now.

                            Is this bad ?

                            a4bc78de-fe0a-4e6c-bc24-385d2efb8e02-image.png

                            EDIT:

                            Was in the wrong directory, this looks better.

                            cd4c0199-cb1b-435e-a3a8-9c284050d59e-image.png

                            1 Reply Last reply
                            0
                            • toggledbitsT Offline
                              toggledbitsT Offline
                              toggledbits
                              wrote on last edited by
                              #16

                              You should not be running npm as root.

                              Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                              1 Reply Last reply
                              0
                              • cw-kidC Offline
                                cw-kidC Offline
                                cw-kid
                                wrote on last edited by
                                #17

                                I normally login as root. When I run it under my name I get this:

                                6e9f7719-3c40-4cc2-8734-0ca46735779a-image.png

                                1 Reply Last reply
                                0
                                • cw-kidC Offline
                                  cw-kidC Offline
                                  cw-kid
                                  wrote on last edited by cw-kid
                                  #18

                                  Am I running out of disk space?

                                  60ed2dd0-3caa-48a2-a853-0d1551a8d583-image.png

                                  b9196386-d224-4470-b1a1-2144150f361e-image.png

                                  1 Reply Last reply
                                  0
                                  • cw-kidC Offline
                                    cw-kidC Offline
                                    cw-kid
                                    wrote on last edited by
                                    #19

                                    The syslog is massive and I am not sure what I am looking for, however I just saw this:

                                    Mar 18 18:03:33 HP-Thin01 node[407]: NODE_PATH /home/stuart/reactor
                                    Mar 18 18:03:33 HP-Thin01 node[407]: node:internal/fs/utils:344
                                    Mar 18 18:03:33 HP-Thin01 node[407]:     throw err;
                                    Mar 18 18:03:33 HP-Thin01 node[407]:     ^
                                    Mar 18 18:03:33 HP-Thin01 node[407]: Error: ENOSPC: no space left on device, write
                                    Mar 18 18:03:33 HP-Thin01 node[407]:     at Object.writeSync (node:fs:884:3)
                                    Mar 18 18:03:33 HP-Thin01 node[407]:     at Object.writeFileSync (node:fs:2159:26)
                                    Mar 18 18:03:33 HP-Thin01 node[407]:     at Object.<anonymous> (/home/stuart/reactor/app.js:236:133)
                                    Mar 18 18:03:33 HP-Thin01 node[407]:     at Module._compile (node:internal/modules/cjs/loader:1101:14)
                                    Mar 18 18:03:33 HP-Thin01 node[407]:     at Object.Module._extensions..js (node:internal/modules/cjs/loader:1153:10)
                                    Mar 18 18:03:33 HP-Thin01 node[407]:     at Module.load (node:internal/modules/cjs/loader:981:32)
                                    Mar 18 18:03:33 HP-Thin01 node[407]:     at Function.Module._load (node:internal/modules/cjs/loader:822:12)
                                    Mar 18 18:03:33 HP-Thin01 node[407]:     at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:81:12)
                                    Mar 18 18:03:33 HP-Thin01 node[407]:     at node:internal/main/run_main_module:17:47 {
                                    Mar 18 18:03:33 HP-Thin01 node[407]:   errno: -28,
                                    Mar 18 18:03:33 HP-Thin01 node[407]:   syscall: 'write',
                                    Mar 18 18:03:33 HP-Thin01 node[407]:   code: 'ENOSPC'
                                    Mar 18 18:03:33 HP-Thin01 node[407]: }
                                    Mar 18 18:03:33 HP-Thin01 systemd[1]: reactor.service: Main process exited, code=exited, status=1/FAILURE
                                    Mar 18 18:03:33 HP-Thin01 systemd[1]: reactor.service: Failed with result 'exit-code'.
                                    

                                    If I am running out of disk space, I am not sure really how and where to find out what is talking up all the space and how to clear it.

                                    I am only running MSR, Node-Red and HA Bridge nothing else on this box.

                                    Thanks

                                    1 Reply Last reply
                                    0
                                    • cw-kidC Offline
                                      cw-kidC Offline
                                      cw-kid
                                      wrote on last edited by
                                      #20

                                      OK I have deleted some log files and got some free space back

                                      e079a286-3275-4367-a297-18fd5d9e0fc1-image.png

                                      /dev/sda2 is the main partition by the looks of it.

                                      However after a reboot MSR still isn't loading up.

                                      So my system is knackered currently as all my automation rules run on MSR.

                                      1 Reply Last reply
                                      0
                                      • toggledbitsT Offline
                                        toggledbitsT Offline
                                        toggledbits
                                        wrote on last edited by
                                        #21

                                        Ok, so now look at the logs again. Disk space problem hiding others, now you should be able to see them.

                                        Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                                        1 Reply Last reply
                                        0
                                        • cw-kidC Offline
                                          cw-kidC Offline
                                          cw-kid
                                          wrote on last edited by cw-kid
                                          #22

                                          Don't know what's happened now but reactor.service is not even in the list at all anymore.

                                          5c811953-8e67-497a-a6e1-b048dc1f99db-image.png

                                          The service file is still in there

                                          58f2f4ef-6ec7-48d8-b572-21173ef31d44-image.png

                                          I'm downloading the syslog again now.

                                          1 Reply Last reply
                                          0
                                          Reply
                                          • Reply as topic
                                          Log in to reply
                                          • Oldest to Newest
                                          • Newest to Oldest
                                          • Most Votes


                                          Recent Topics

                                          • Copying a global reaction
                                            toggledbitsT
                                            toggledbits
                                            0
                                            3
                                            76

                                          • [HowTo] Using HABridge with Reactor
                                            CatmanV2C
                                            CatmanV2
                                            0
                                            9
                                            373

                                          • [Reactor] Bug when sending MQTT boolean payloads
                                            toggledbitsT
                                            toggledbits
                                            0
                                            4
                                            124

                                          • Genuinely impressed with Zigbee and HA / Reactor
                                            therealdbT
                                            therealdb
                                            1
                                            8
                                            284

                                          • Difficulty defining repeating annual period
                                            G
                                            gwp1
                                            0
                                            5
                                            85

                                          • Need help with sequence
                                            therealdbT
                                            therealdb
                                            0
                                            3
                                            54

                                          • Possible feature request?
                                            therealdbT
                                            therealdb
                                            0
                                            5
                                            160

                                          • Logic Assistance: Exterior Lights on when Illuminance Below Threshold
                                            CatmanV2C
                                            CatmanV2
                                            0
                                            11
                                            326

                                          • Time series documentation
                                            tunnusT
                                            tunnus
                                            0
                                            11
                                            385

                                          • MQTT templates for ZIgbee scene controller, or a better way?
                                            CatmanV2C
                                            CatmanV2
                                            0
                                            3
                                            154

                                          • Reset a delay
                                            CatmanV2C
                                            CatmanV2
                                            0
                                            8
                                            214
                                          Powered by NodeBB | Contributors
                                          Hosted freely by 10RUPTiV - Solutions Technologiques | Contact us
                                          • Login

                                          • Don't have an account? Register

                                          • Login or register to search.
                                          • First post
                                            Last post
                                          0
                                          • Categories
                                          • Recent
                                          • Tags
                                          • Popular
                                          • Unsolved