Plugin Switchboard : Virtual Switch in VeraPlus not shown in Openluup
-
You have two options to get plugin/device files that you may need:
- pull them all down from Vera using the VeraBridge action
GetVeraFiles(no need for any Files parameter) - install the plugin whose files you need from Alt App Store (Switchboard is there)
In the case of #2, it will install a copy of the plugin, which you may not need (so can delete.)
Hope I've understood the question correctly.
- pull them all down from Vera using the VeraBridge action
-
Try to update openLuup to the latest version by typing development into the Update box against openLuup on the Plugins page and clicking the update button. Then try #1 above, again.
@akbooer I've been using version 21.3.2 for a few days now, but the connection drops frequently. http: // IP: 3480 / cannot be called, so reactor doesn't work either and the lights and other things don't turn on / off automatically. Node Red can be called so my RP4 is well connected to wifi. Is it possible to go back to the old version; 20.5.22?
-
It would be really helpful if I could get a log file from you which might highlight the problem. I've not come across this difficulty myself, nor (yet) had any other reports. Has anything else changed in your system?
Does the system remain up sufficiently long for you to get the logs and also revert? You can revert to any version manually by retrieving the files in the openLuup folder from the openLuup project in GitHub:
History for openLuup - akbooer/openLuup
a pure-Lua open-source emulation of the Vera Luup environment - History for openLuup - akbooer/openLuup
I've fallen out of the habit of tagging releases, so there's not a sufficiently recent one that you can revert to automatically.
I really would like to get to the root of this problem, though, rather than just trying to avoid it.
-
Correction: the master branch is the version you were running, so simply updating from the Plugins page to that branch will do what you want. (It would still be good to understand what's going wrong for you in the latest.)
Edit: this release is now also tagged as v20.5.22 so you can always return to it easily by typing that into the Plugin Update box.
-
Correction: the master branch is the version you were running, so simply updating from the Plugins page to that branch will do what you want. (It would still be good to understand what's going wrong for you in the latest.)
Edit: this release is now also tagged as v20.5.22 so you can always return to it easily by typing that into the Plugin Update box.
@akbooer I can't remember changing anything except installing a new version at your request. Now I am back to 20.5.22 I still have the problem. I will send a log file.
- Which log file do you want?
- Do you want the log file after I can access openluup again?
- How will I send it to you?
-
@akbooer I've been using version 21.3.2 for a few days now, but the connection drops frequently. http: // IP: 3480 / cannot be called, so reactor doesn't work either and the lights and other things don't turn on / off automatically. Node Red can be called so my RP4 is well connected to wifi. Is it possible to go back to the old version; 20.5.22?
@edwin1972 said in Plugin Switchboard : Virtual Switch in VeraPlus not shown in Openluup:
the connection drops frequently. http: // IP: 3480 / cannot be called
A quick diagnostic...
I assume that you mean that you can't reach AltUI at that URL, but does this get you the openLuup console?
IP:3480/openLuupI'm seeing an error from AltUI in its latest update (I'm running 2.53b.) Did you accept an AltUI update recently?
-
I noticed when I first starting using my new RPI4 that the SSH connection would have frequent pregnant pauses. I'd type and get no response for a few seconds, and then it would spring to life, or a rolling output would pause and then rush to catch up. Although I have good Wifi throughout my house (and well beyond), changing the connection to Ethernet was the first thing I tried and no troubles since.
Since then, I ran across an article where someone had figured out that at a specific resolution (1440p), the RF noise from the HDMI exactly stomps on WiFi channel 1 (which is what I use). Here: https://www.tomshardware.com/news/raspberry-pi-4-wi-fi-not-working
Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.
-
I noticed when I first starting using my new RPI4 that the SSH connection would have frequent pregnant pauses. I'd type and get no response for a few seconds, and then it would spring to life, or a rolling output would pause and then rush to catch up. Although I have good Wifi throughout my house (and well beyond), changing the connection to Ethernet was the first thing I tried and no troubles since.
Since then, I ran across an article where someone had figured out that at a specific resolution (1440p), the RF noise from the HDMI exactly stomps on WiFi channel 1 (which is what I use). Here: https://www.tomshardware.com/news/raspberry-pi-4-wi-fi-not-working
@toggledbits said in Plugin Switchboard : Virtual Switch in VeraPlus not shown in Openluup:
I noticed when I first starting using my new RPI4 that the SSH connection would have frequent pregnant pauses.
@toggledbits did you mean to post that reply under this topic? (Asking cuz I don't see its precedent)
-
Can’t see anything in the logs which is untoward. What may show something is a couple of the previous logs (.1, .2) after it’s failed and you’ve restarted.
-
@toggledbits said in Plugin Switchboard : Virtual Switch in VeraPlus not shown in Openluup:
I noticed when I first starting using my new RPI4 that the SSH connection would have frequent pregnant pauses.
@toggledbits did you mean to post that reply under this topic? (Asking cuz I don't see its precedent)
@librasun said in Plugin Switchboard : Virtual Switch in VeraPlus not shown in Openluup:
@toggledbits did you mean to post that reply under this topic? (Asking cuz I don't see its precedent)
Precedent was this post in topic: https://smarthome.community/post/5129
-
I changed the connection to ethernet but the problem is not resolved. It takes sometimes over 60 minutes or even more to reconnect with openluup or alui via IP; 3480. I have ordered a new micro DS card and I restore my RP4 backup. I hope the problem may be solved.
The strange thing is that node red server can be reached when openluup is not available.
