Skip to content
  • Categories
  • Recent
  • Tags
  • Popular
  • Unsolved
Collapse
Discussion Forum to share and further the development of home control and automation, independent of platforms.
  1. Home
  2. Software
  3. Multi-System Reactor
  4. [Dev] Inheritance in MQTT templates?
Gradually turn on lights.
Tom_DT
I have several lights that I would like to turn on very gradually over 15 or 20 seconds. from 0 to .25 in .01 increments. I have tried a few things that came nowhere near working, so here I am.
Multi-System Reactor
Stop the MSR by an external switch on Hubitat.
wmarcolinW
Use case: When performing home maintenance, such as air conditioning, I want all rules involving air conditioning to be disabled. To do this, to day, I have a virtual switch that I placed within all rules involving air conditioning, meaning that if I turn it off, none of them work. Then another situation: the water pump system and garden irrigation, another switch. In short, I had to create several virtual switches in Hubitat to disable rules in MSR. Unfortunately, however, I was unable to cover all scenarios, so I wondered if it would be possible for MSR to support a virtual MSR switch, which, when configured in the reactor settings, would function as a general on/off switch for MSR. If it is configured and turned off, the entire rules and actions in MSR stops working, except for the status change reading process, specifically for this switch, which, when turned on, would restart the MSR. Would it be possible to do something like this? Any recommendations from the experts?
Multi-System Reactor
Error After Upgrade
T
Topic thumbnail image
Multi-System Reactor
Reset attribute value of entity in event handler
R
Topic thumbnail image
Multi-System Reactor
Need help figuring out how to delay a reset on reaction
T
Topic thumbnail image
Multi-System Reactor
Way to search for rules (rule state) in other rules
T
@toggledbits, not sure if this is a feature request or I'm using the search tool wrong. You have a "Search for rule" in the Rules Set tab in MSR. It works nicely to find a rule and bring up said rule, but can it/could it be used for as a "where used?" global search? For instance, I have a fairly large set of rules, divided up into 10 different rulesets. There's easily a hundred individual rules, and many of the rules have Rule State triggers, which of course refer to other rules. Amongst my troubleshooting today, I came across what may have been a duplicate or troubleshooting attempt, but I can't tell if it's actually used as a Rule State in another rule without opening each rule that I suspect it may be a part of. Thanks.
Multi-System Reactor
Links to MSR from HA
Tom_DT
I am using Home Assistant a lot recently. On a dashboard showing the devices, I would like to show a link to the MSR rule that controls the devices. Is there a way to link directly into MSR?
Multi-System Reactor
Set Reaction > Script Action
wmarcolinW
Topic thumbnail image
Multi-System Reactor
Errors after updating to MQTTController build 25139
tunnusT
I'm running MSR build 25139 on Docker, using MQTT controller 24293, and everything working as expected. But if I try to upgrade to MQTTController build 25139, I'm getting the following errors on MSR UI: An Entity Attribute condition in "Lay-Z-Spa auto heating off" (Terrace) failed because the referenced entity "Lay-Z-Spa States" (mqtt>layzspa_states) does not have attribute value_sensor.god Last 11:20:37 An Entity Attribute condition in "Lay-Z-Spa auto heating off" (Terrace) failed because the referenced entity "Lay-Z-Spa States" (mqtt>layzspa_states) does not have attribute temperature_sensor.green Last 11:20:37 An Entity Attribute condition in "Lay-Z-Spa filter pump auto off" (Terrace) failed because the referenced entity "Lay-Z-Spa States" (mqtt>layzspa_states) does not have attribute temperature_sensor.red Last 11:20:37 An Entity Attribute condition in "Lay-Z-Spa filter pump auto run" (Terrace) failed because the referenced entity "Lay-Z-Spa States" (mqtt>layzspa_states) does not have attribute value_sensor.pump Last 11:20:37 An Entity Attribute condition in "Lay-Z-Spa watchdog" (Terrace) failed because the referenced entity "Lay-Z-Spa States" (mqtt>layzspa_states) does not have attribute value_sensor.status Last 11:20:37 My MQTT configuration (local_mqtt_devices.yaml) for the related entity is: layzspa_message: type: ValueSensor capabilities: ["temperature_sensor", "value_sensor", "power_sensor"] primary_attribute: power_sensor.value events: "layzspa/message": "power_sensor.value": json_payload: true if_expr: '! isnull( payload?.PWR )' expr: "float(payload.PWR)" "value_sensor.air": json_payload: true if_expr: '! isnull( payload?.AIR )' expr: "float(payload.AIR)" "value_sensor.pump": json_payload: true if_expr: '! isnull( payload?.FLT )' expr: "float(payload.FLT)" "value_sensor.god": json_payload: true if_expr: '! isnull( payload?.GOD )' expr: "float(payload.GOD)" "value_sensor.lock": json_payload: true if_expr: '! isnull( payload?.LCK )' expr: "float(payload.LCK)" "value_sensor.unit": json_payload: true if_expr: '! isnull( payload?.UNT )' expr: "float(payload.UNT)" "value_sensor.error": json_payload: true if_expr: '! isnull( payload?.ERR )' expr: "float(payload.ERR)" "temperature_sensor.green": json_payload: true if_expr: '! isnull( payload?.GRN )' expr: "float(payload.GRN)" "temperature_sensor.red": json_payload: true if_expr: '! isnull( payload?.RED )' expr: "float(payload.RED)" "temperature_sensor.target": json_payload: true if_expr: '! isnull( payload?.TGT )' expr: "float(payload.TGT)" "temperature_sensor.value": json_payload: true if_expr: '! isnull( payload?.TMP )' expr: "float(payload.TMP)" "temperature_sensor.virtual": json_payload: true if_expr: '! isnull( payload?.VTM )' expr: "round(float(payload.VTM), 1)" "temperature_sensor.ambient": json_payload: true if_expr: '! isnull( payload?.AMB )' expr: "float(payload.AMB)" "layzspa/Status": "value_sensor.status": if_expr: '! isnull( payload )' expr: "payload" "layzspa/button": "value_sensor.button": if_expr: '! isnull( payload )' expr: "payload" and in reactor.yaml I have: "layzspa_states": name: "Lay-Z-Spa States" friendly_name: 'Lay-Z-Spa States' include: layzspa_message I realize my MQTT configuration might be a bit unorthodox, but could there still be something unintentional in the latest MQTTController build? If needed, I can provide detailed logs.
Multi-System Reactor
🎉 My very first MSR controller: OpenSprinkler
therealdbT
Since today is my birthday - and I still pretend to be unconventional - I'm giving away a present to this wonderful community and I'm releasing my first OpenSprinkler controller for MSR. It was real fun to code it - and while it's still WIP, it seems to work OK for me. It's polling-based at the moment, but I'll add support for updates via MQTT very soon (it's already partially coded). Get it at (install is similar to MQTTController and such): https://github.com/dbochicchio/reactor-opensprinkler Feel free to try it. It's beta software, but it's stable. I'll update it weekly until all the tasks from my todo list are empty. Since I've learnt a lot from this controller, I'll explore new controllers soon.
Multi-System Reactor
Advice reqeusted to migrate MSR from Bare Metal to Container
T
Good day all, I'm in the process of trying to shut down my 10 year old Linux home server that served many purposes, but primarily it's what I used for my NAS/Plex Media server. I migrated the NAS aspect of the server in November of last year to a true NAS solution (Ubiquti UNAS Pro), which is rack mount and much more efficient than my old tower, which it's only side benefit was heating my home office during the winter. Unfortunately it also means heating my home office during the summer, which were about to be in full swing. I have two things running on this 10 year old server at this point. MSR and pi-hole. I'm running Plex Media Server on Fedora Workstation in Podman on mini PC, which is much more energy efficient than my old tower. My next step is to migrate MSR. I know there are images of MSR out there, and creating it is well documented. I'm going to be using Podman instead of Docker for various reasons, but they work very similar. What I don't know, is what I need to do to migrate my existing Bare Metal installation over to a container. Has anyone done this? Any advice?
Multi-System Reactor
Reactor (Multi-System/Multi-Hub) Announcements
toggledbitsT
Build 21228 has been released. Docker images available from DockerHub as usual, and bare-metal packages here. Home Assistant up to version 2021.8.6 supported; the online version of the manual will now state the current supported versions; Fix an error in OWMWeatherController that could cause it to stop updating; Unify the approach to entity filtering on all hub interface classes (controllers); this works for device entities only; it may be extended to other entities later; Improve error detail in messages for EzloController during auth phase; Add isRuleSet() and isRuleEnabled() functions to expressions extensions; Implement set action for lock and passage capabilities (makes them more easily scriptable in some cases); Fix a place in the UI where 24-hour time was not being displayed.
Multi-System Reactor
Can´t restart or upgrade/deploy MSR
F
Topic thumbnail image
Multi-System Reactor
[Solved] Limit HA Entity in MSR
wmarcolinW
Topic thumbnail image
Multi-System Reactor
Organizing/ structuring rule sets and rules
R
Hi guys, Just wondering how you guys organize your rule sets and rules. I wish I had an extra layer to have some more granularity, but my feature request was not popular. Maybe there are better ways to organize my rule sets. I use the rule sets now primarily for rooms. So a rule set per room. But maybe grouping by functionality works better. Any examples/ suggestions would be appreciated.
Multi-System Reactor
Moving MSR from a QNAP container to RP 5 - some issues
Tom_DT
Topic thumbnail image
Multi-System Reactor
Widget deletion does not work and landing page (status) is empy
M
Topic thumbnail image
Multi-System Reactor
Need help reducing false positive notifications
T
Topic thumbnail image
Multi-System Reactor
Deleting widgets
tunnusT
Hopefully a trivial question, but how do you delete widgets in a status page? Using build 22266
Multi-System Reactor
MQTT configuration question
tunnusT
I have the following yaml configuration in local_mqtt_devices file x_mqtt_device: set_speed: arguments: speed: type: str topic: "command/%friendly_name%" payload: type: json expr: '{ "fan": parameters.speed }' While this works fine, I'm wondering how this could be changed to "fixed" parameters, as in this case "fan" only accepts "A", "Q" or a numeric value of 1-5?
Multi-System Reactor

[Dev] Inheritance in MQTT templates?

Scheduled Pinned Locked Moved Multi-System Reactor
40 Posts 4 Posters 4.8k Views 4 Watching
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • toggledbitsT Offline
    toggledbitsT Offline
    toggledbits
    wrote on last edited by toggledbits
    #17

    Turn debug level 5 on for MQTTController. It will show you how it's loading the templates and building the final entity configuration. The message fragment you'll want to look for is merged template for sovrumsdorr... then work backwards in the log from there to configuring entity sovrumsdorr. Everything in between is the setup.

    Also examine the debug messages at startup for where it's finding templates and loading them... make sure everything it's loading is what's intended, and you don't have a stray old file sitting around somewhere that it's sucking in.

    Edit: your logs are showing a lot of duplicate definitions in the startup messages...

    Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

    CrilleC 1 Reply Last reply
    0
    • toggledbitsT toggledbits

      Turn debug level 5 on for MQTTController. It will show you how it's loading the templates and building the final entity configuration. The message fragment you'll want to look for is merged template for sovrumsdorr... then work backwards in the log from there to configuring entity sovrumsdorr. Everything in between is the setup.

      Also examine the debug messages at startup for where it's finding templates and loading them... make sure everything it's loading is what's intended, and you don't have a stray old file sitting around somewhere that it's sucking in.

      Edit: your logs are showing a lot of duplicate definitions in the startup messages...

      CrilleC Offline
      CrilleC Offline
      Crille
      wrote on last edited by Crille
      #18

      It seems to merge the events: section of string_sensor and power_switch in ...common.yaml and wrap value_sensor.units in string_sensor capability.
      I've looked for strange characters that could cause it but found nothing, validated all files OK in yamllint.

      [latest-24152]2024-06-06T06:29:11.699Z <MQTTController:5:MQTTController.js:146> MQTTController#mosquitto-mqtt configuring entity sovrumsdorr
      [latest-24152]2024-06-06T06:29:11.699Z <MQTTController:5:MQTTController.js:205> MQTTController#mosquitto-mqtt merged template for sovrumsdorr (from /home/homebridge/reactor/config/mqtt_templates/zigbee2mqtt_common.yaml/zigbee2mqtt_common.yaml):
      {
          "capabilities": [
              "door_sensor",
              "x_mqtt_device",
              "value_sensor",
              "battery_power"
          ],
          "primary_attribute": "door_sensor.state",
          "requires": [
              "topic"
          ],
          "include": [
              "zigbee2mqtt_availability_no_get",
              "zigbee2mqtt_lqi",
              "zigbee2mqtt_battery_power",
              "zigbee2mqtt_tuya_door_sensor"
          ],
          "events": {
              "%prefix:zigbee2mqtt%/%topic%": {
                  "door_sensor.state": {
                      "json_payload": true,
                      "expr": "payload?.contact"
                  },
                  "value_sensor.value": {
                      "json_payload": true,
                      "if_expr": "! isnull(payload)",
                      "expr": "payload.linkquality",
                      "attribute": "value_sensor.value"
                  },
                  "value_sensor.units": "lqi",
                  "string_sensor.value": {
                      "json_payload": true,
                      "if_expr": "! isnull(payload)",
                      "expr": "payload?.update_available ? \"OTA firmware update available!\" : \"no update available\"",
                      "attribute": "string_sensor.value"
                  },
                  "power_switch.state": {
                      "json_payload": true,
                      "expr": "payload?.state == \"ON\"",
                      "attribute": "power_switch.state"
                  },
                  "battery_power.level": {
                      "json_payload": true,
                      "expr": "payload?.battery / 100",
                      "attribute": "battery_power.level"
                  },
                  "battery_power.since": {
                      "expr": "time()",
                      "attribute": "battery_power.since"
                  }
              },
              "%prefix:zigbee2mqtt%/%topic%/availability": {
                  "x_mqtt_device.online": {
                      "if_expr": "! isnull(payload)",
                      "expr": "lower(payload) == \"online\"",
                      "attribute": "x_mqtt_device.online"
                  }
              }
          },
          "__source": "/home/homebridge/reactor/config/mqtt_templates/zigbee2mqtt_common.yaml/zigbee2mqtt_common.yaml",
          "actions": {
              "x_mqtt_device": {
                  "poll": false
              }
          },
          "name": "Sovrumsdörr",
          "topic": "Sovrumsdörr"
      }
      [latest-24152]2024-06-06T06:29:11.699Z <MQTTController:5:MQTTController.js:264> MQTTController#mosquitto-mqtt set primary attribute of door_sensor.state to Entity#mosquitto-mqtt>sovrumsdorr
      [latest-24152]2024-06-06T06:29:11.700Z <MQTTController:5:MQTTController.js:289> MQTTController#mosquitto-mqtt registering event handler %prefix:zigbee2mqtt%/%topic% for sovrumsdorr
      [latest-24152]2024-06-06T06:29:11.700Z <MQTTController:5:MQTTController.js:289> MQTTController#mosquitto-mqtt registering event handler %prefix:zigbee2mqtt%/%topic%/availability for sovrumsdorr
      [latest-24152]2024-06-06T06:29:11.700Z <MQTTController:5:MQTTController.js:368> MQTTController#mosquitto-mqtt registering action x_mqtt_device.poll for sovrumsdorr
      

      Regarding the duplicates, it could be the templates with different primary_attribute: and it is on my roadmap to bring it up for discussion if attributes also could be parameterized with defaults like %primary_attribute:[temperature / humidity / power_switch / dimming / motion / light]% or %temperature_sensor.units:[C / F]%.

      EDIT: Or is caused by the mystery of this issue? e.g. string_sensor and power_switch is somehow included in all templates.

      1 Reply Last reply
      0
      • therealdbT Offline
        therealdbT Offline
        therealdb
        wrote on last edited by
        #19

        @Crille at some point I had similar problems, I fixed them and I reported here. Now I cannot repro it again, but it seems very similar and related to primary attributes in base templates. It seems like the first one is used and that’s causing troubles along the hierarchy, but, as I said, I’m not able to repro it again.

        --
        On a mission to automate everything.

        My MS Reactor contrib
        My Luup Plug-ins

        1 Reply Last reply
        1
        • toggledbitsT Offline
          toggledbitsT Offline
          toggledbits
          wrote on last edited by toggledbits
          #20

          It also looks like something may be getting a shallow copy when it needs a deep copy, and it's being modified later and polluting the other references. I'm really tied up today, but I'll look at this as soon as I can.

          Did you address the template redefinitions that were being logged at startup? That has nothing to do with primary attributes; the entire template is trying to be redefined.

          Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

          CrilleC 1 Reply Last reply
          0
          • toggledbitsT toggledbits

            It also looks like something may be getting a shallow copy when it needs a deep copy, and it's being modified later and polluting the other references. I'm really tied up today, but I'll look at this as soon as I can.

            Did you address the template redefinitions that were being logged at startup? That has nothing to do with primary attributes; the entire template is trying to be redefined.

            CrilleC Offline
            CrilleC Offline
            Crille
            wrote on last edited by
            #21

            No rush!

            @toggledbits said in [Dev] Inheritance in MQTT templates?:

            Did you address the template redefinitions that were being logged at startup?

            You mean this?

            <MQTTController:WARN> MQTTController#mqtt file zigbee2mqtt_tuya_door_sensor.yaml in /home/homebridge/reactor/config/mqtt_templates/zigbee2mqtt_tuya_door_sensor.yaml overrides existing template definition zigbee2mqtt_tuya_door_sensor
            

            If so I don't know what to do about it, it's just the template provided in my earlier post and there is no reference/copy of it in the reactor folder/subfolders that I know of.

            1 Reply Last reply
            0
            • toggledbitsT Offline
              toggledbitsT Offline
              toggledbits
              wrote on last edited by
              #22

              With debug level 5, that message will have another message that follows it to tell you what file originally defined it.

              Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

              CrilleC 1 Reply Last reply
              0
              • toggledbitsT toggledbits

                With debug level 5, that message will have another message that follows it to tell you what file originally defined it.

                CrilleC Offline
                CrilleC Offline
                Crille
                wrote on last edited by
                #23

                This?

                [latest-24152]2024-06-06T19:29:35.079Z <MQTTController:5:MQTTController.js:941> MQTTController#mqtt loading template defs, considering zigbee2mqtt_tuya_door_sensor.yaml
                [latest-24152]2024-06-06T19:29:35.079Z <MQTTController:5:MQTTController.js:987> MQTTController#mqtt loading YAML template data from /home/homebridge/reactor/config/mqtt_templates/zigbee2mqt
                t_tuya_door_sensor.yaml
                [latest-24152]2024-06-06T19:29:35.080Z <MQTTController:WARN> MQTTController#mqtt file zigbee2mqtt_tuya_door_sensor.yaml in /home/homebridge/reactor/config/mqtt_templates/zigbee2mqtt_tuya_do
                or_sensor.yaml overrides existing template definition zigbee2mqtt_tuya_door_sensor
                [latest-24152]2024-06-06T19:29:35.080Z <MQTTController:5:MQTTController.js:918> MQTTController#mqtt previously defined in /home/homebridge/reactor/config/mqtt_templates/zigbee2mqtt_tuya_doo
                r_sensor.yaml/zigbee2mqtt_tuya_door_sensor.yaml
                
                
                1 Reply Last reply
                0
                • toggledbitsT Offline
                  toggledbitsT Offline
                  toggledbits
                  wrote on last edited by
                  #24

                  Uh yes... 😆

                  Digging in now...

                  Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                  1 Reply Last reply
                  0
                  • toggledbitsT Offline
                    toggledbitsT Offline
                    toggledbits
                    wrote on last edited by
                    #25

                    I need the config for all of your zigbee2mqtt-related entities. Just looking at the one sovrumsdorr, I'm not able to reproduce the problem.

                    Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                    1 Reply Last reply
                    0
                    • CrilleC Offline
                      CrilleC Offline
                      Crille
                      wrote on last edited by
                      #26

                      Config as in reactor.yaml?

                      1 Reply Last reply
                      0
                      • toggledbitsT Offline
                        toggledbitsT Offline
                        toggledbits
                        wrote on last edited by
                        #27

                        Yes, but just the entities that use the zigbee2mqtt templates. I don't need all of it.

                        Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                        1 Reply Last reply
                        0
                        • CrilleC Offline
                          CrilleC Offline
                          Crille
                          wrote on last edited by Crille
                          #28
                          entities:
                            "zigbee2mqtt_sensor":
                              name: "Zigbee2MQTT"
                              topic: "zigbee2mqtt"
                              include: my_zigbee2mqtt_sensor
                            "datarummet":
                              name: "Datarummet"
                              topic: "Datarummet"
                              include: zigbee2mqtt_tradfri_light_bulb
                            "sovrummet":
                              name: "Sovrummet"
                              topic: "Sovrummet"
                              include: zigbee2mqtt_tradfri_light_bulb_ws
                            "milia":
                              name: "Milia"
                              topic: "Milia"
                              include: zigbee2mqtt_tradfri_light_bulb_ws
                            "hallen1":
                              name: "Hallen 1"
                              topic: "Hallen 1"
                              include: zigbee2mqtt_tradfri_light_bulb
                            "hallen2":
                              name: "Hallen 2"
                              topic: "Hallen 2"
                              include: zigbee2mqtt_tradfri_light_bulb
                            "hallen3":
                              name: "Hallen 3"
                              topic: "Hallen 3"
                              include: zigbee2mqtt_tradfri_light_bulb
                            "fonster_koket":
                              name: "Fönster köket"
                              topic: "Fönster köket"
                              include: zigbee2mqtt_tradfri_light_bulb_ws
                            "soffan":
                              name: "Soffan"
                              topic: "Soffan"
                              include: zigbee2mqtt_tradfri_light_bulb_ws
                            "framsida":
                              name: "Framsida"
                              topic: "Framsida"
                              include: zigbee2mqtt_tradfri_light_bulb
                            "skank":
                              name: "Skänk"
                              topic: "Skänk"
                              include: zigbee2mqtt_tradfri_light_bulb
                            "baksida":
                              name: "Baksida"
                              topic: "Baksida"
                              include: zigbee2mqtt_tradfri_light_bulb
                            "lampa_spel":
                              name: "Lampa spel"
                              topic: "Lampa spel"
                              include: zigbee2mqtt_tradfri_light_bulb
                            "lampa_ella":
                              name: "Lampa Ella"
                              topic: "Ellas rum"
                              include: zigbee2mqtt_tradfri_light_bulb
                            "lampa_gym":
                              name: "Lampa gym"
                              topic: "Lampa gym"
                              include: zigbee2mqtt_tradfri_light_bulb
                            "lampa_tv":
                              name: "Lampa TV"
                              topic: "Lampa TV"
                              include: zigbee2mqtt_tradfri_control_outlet
                            "vitrinskap":
                              name: "Vitrinskåp"
                              topic: "Vitrinskåp"
                              include: zigbee2mqtt_tradfri_control_outlet
                            "klimat_sovrum":
                              name: "Klimat sovrum"
                              topic: "Klimat sovrum"
                              include: zigbee2mqtt_aqara_sensor_temperature_humidity
                            "klimat_kaminen":
                              name: "Klimat kaminen"
                              topic: "Klimat kaminen"
                              include: zigbee2mqtt_aqara_sensor_temperature_humidity
                            "klimat_dusch":
                              name: "Klimat dusch"
                              topic: "Klimat dusch"
                              include: zigbee2mqtt_aqara_sensor_humidity_temperature
                            "klimat_tvattstugan":
                              name: "Klimat tvättstugan"
                              topic: "Klimat tvättstugan"
                              include: zigbee2mqtt_aqara_sensor_temperature_humidity
                            "rorelse_hallen":
                              name: "Rörelse hallen"
                              topic: "Rörelse hallen"
                              include: zigbee2mqtt_aqara_light_motion_sensor
                            "rorelse_kallaren":
                              name: "Rörelse källaren"
                              topic: "Rörelse källaren"
                              include: zigbee2mqtt_aqara_light_motion_sensor
                            "rorelse_forradet":
                              name: "Rörelse förrådet"
                              topic: "Rörelse förrådet"
                              include: zigbee2mqtt_tuya_motion_light_sensor
                            "mini_switch_1":
                              name: "Mini Switch källaren"
                              topic: "Mini Switch källaren"
                              include: zigbee2mqtt_aqara_mini_switch
                            "jul_framsida":
                              name: "Jul Framsida"
                              topic: "Jul Framsida"
                              include: zigbee2mqtt_tuya_smart_plug_pm
                            "jul_koket":
                              name: "Jul Köket"
                              topic: "Jul Köket"
                              include: zigbee2mqtt_tuya_smart_plug_pm
                            "jul_sovrummet":
                              name: "Jul Sovrummet"
                              topic: "Jul Sovrummet"
                              include: zigbee2mqtt_tuya_smart_plug_pm
                            "jul_datarummet":
                              name: "Jul Datarummet"
                              topic: "Jul Datarummet"
                              include: zigbee2mqtt_tuya_smart_plug_pm
                            "element_gillestugan":
                              name: "Element gillestugan"
                              topic: "Element gillestugan"
                              include: zigbee2mqtt_tuya_smart_plug_pm
                            "vaxtbelysning_kallare":
                              name: "Växtbelysning källare"
                              topic: "Växtbelysning källare"
                              include: zigbee2mqtt_tuya_smart_plug_pm
                            "kompressor":
                              name: "Kompressor"
                              topic: "Kompressor"
                              include: zigbee2mqtt_tuya_smart_plug_pm
                            "luftrenare":
                              name: "Luftrenare Sovrum"
                              topic: "Luftrenare"
                              include: zigbee2mqtt_tuya_smart_plug_pm
                            "uttag_uterummet":
                              name: "Uttag uterummet"
                              topic: "Uttag uterummet"
                              include: zigbee2mqtt_tuya_smart_plug_pm
                            "sovrumsdorr":
                              name: "Sovrumsdörr"
                              topic: "Sovrumsdörr"
                              include: zigbee2mqtt_tuya_door_sensor
                            "entrebelysning":
                              name: "Entrébelysning"
                              topic: "Entrebelysning"
                              include: zigbee2mqtt_tuya_light_bulb_rgbcw
                            "lampa_uterummet":
                              name: "Lampa uterummet"
                              topic: "Lampa uterummet"
                              include: zigbee2mqtt_tuya_light_bulb_rgbcw
                          

                          EDIT: unrelated, found entity id "jul_köket" and renamed it to "jul_koket" in post and Reactor.

                          1 Reply Last reply
                          0
                          • toggledbitsT Offline
                            toggledbitsT Offline
                            toggledbits
                            wrote on last edited by
                            #29

                            OK. I also need the definitions for zigbee2mqtt_tradfri_light_bulb and all of the other templates not in the common file you previously posted.

                            Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                            1 Reply Last reply
                            0
                            • toggledbitsT Offline
                              toggledbitsT Offline
                              toggledbits
                              wrote on last edited by
                              #30

                              Wait... are those just available on Github? Are your current versions published in any branch there? If so, I'll just grab them from there.

                              Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                              1 Reply Last reply
                              0
                              • CrilleC Offline
                                CrilleC Offline
                                Crille
                                wrote on last edited by
                                #31

                                No I haven't published them due to this issue but I can put them in the test branch, hold on.

                                1 Reply Last reply
                                0
                                • CrilleC Offline
                                  CrilleC Offline
                                  Crille
                                  wrote on last edited by
                                  #32

                                  Available in zigbee2mqtt_test.zip

                                  1 Reply Last reply
                                  1
                                  • CrilleC Offline
                                    CrilleC Offline
                                    Crille
                                    wrote on last edited by
                                    #33

                                    Looks like MQTTController 24159 solved it. I don't see any errors or warnings in the log after a restart, except all of these but I quess that's normal?

                                    <MQTTController:WARN> MQTTController#mqtt file /home/homebridge/reactor/config/ext/MQTTController/templates/tasmota.yaml overrides existing template definition tasmota_generic_relay from /home/homebridge/reactor/config/ext/MQTTController/templates/tasmota.yaml
                                    
                                    1 Reply Last reply
                                    0
                                    • toggledbitsT Offline
                                      toggledbitsT Offline
                                      toggledbits
                                      wrote on last edited by
                                      #34

                                      No not normal, and I don't get those.

                                      Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                                      1 Reply Last reply
                                      0
                                      • CrilleC Offline
                                        CrilleC Offline
                                        Crille
                                        wrote on last edited by
                                        #35

                                        Strange! I wonder what’s causing that in my setup then as it’s the integrated templates as well.

                                        1 Reply Last reply
                                        0
                                        • toggledbitsT Offline
                                          toggledbitsT Offline
                                          toggledbits
                                          wrote on last edited by
                                          #36

                                          Are you running more than one instance of MQTTController?

                                          Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                                          1 Reply Last reply
                                          0
                                          Reply
                                          • Reply as topic
                                          Log in to reply
                                          • Oldest to Newest
                                          • Newest to Oldest
                                          • Most Votes


                                          Recent Topics

                                          • Gradually turn on lights.
                                            G
                                            gwp1
                                            0
                                            4
                                            95

                                          • Stop the MSR by an external switch on Hubitat.
                                            wmarcolinW
                                            wmarcolin
                                            0
                                            1
                                            16

                                          • Error After Upgrade
                                            G
                                            gwp1
                                            0
                                            4
                                            87

                                          • Reset attribute value of entity in event handler
                                            R
                                            RHCPNG
                                            0
                                            5
                                            172

                                          • Need help figuring out how to delay a reset on reaction
                                            G
                                            gwp1
                                            0
                                            22
                                            866

                                          • Way to search for rules (rule state) in other rules
                                            T
                                            tamorgen
                                            0
                                            3
                                            92

                                          • Links to MSR from HA
                                            Tom_DT
                                            Tom_D
                                            0
                                            1
                                            78

                                          • Set Reaction > Script Action
                                            wmarcolinW
                                            wmarcolin
                                            0
                                            11
                                            419

                                          • Wiring Samotech SM308-S into light fitting
                                            akbooerA
                                            akbooer
                                            0
                                            2
                                            137

                                          • Errors after updating to MQTTController build 25139
                                            toggledbitsT
                                            toggledbits
                                            0
                                            6
                                            233

                                          • 🎉 My very first MSR controller: OpenSprinkler
                                            therealdbT
                                            therealdb
                                            5
                                            13
                                            900

                                          • Advice reqeusted to migrate MSR from Bare Metal to Container
                                            T
                                            tamorgen
                                            0
                                            5
                                            247
                                          Powered by NodeBB | Contributors
                                          Hosted freely by 10RUPTiV - Solutions Technologiques | Contact us
                                          • Login

                                          • Don't have an account? Register

                                          • Login or register to search.
                                          • First post
                                            Last post
                                          0
                                          • Categories
                                          • Recent
                                          • Tags
                                          • Popular
                                          • Unsolved