-
-
The wifi on my router is turned off, and wifi around the house is provided using a mesh - 3 units altogether (one connected directly to the router) that are spread around the house.
I would like to start automating certain tasks around the house and intend to try adding a few smart sockets to my setup.
The mesh system I have supports both 2.4GHz and 5GHz, and does not provide me with the option to control them - i.e. turn one or both on/off, give each a different SSID, etc.
The devices I wish to purchase/use only support 2.4GHz.
Will turning the mesh units off and temporarily turning the 2.4GHz wifi on the router to allow me to set them up be enough? Will I then be able to return to my usual setup and everything will work as it should?
Many thanks in advance
-
Hey everyone, I'm currently working on developing a bed sensor that can detect when you're out of bed. It could be used to trigger other smart home gadgets, like lights or blinds, temperature etc.
The sensors are placed under the legs of your bed post. Should look and feel like "smart furniture pads" with size 2 inches in diameter and 1/4 inch thick.
Before we go any further, I'd love to get your thoughts on this - would a bed sensor like this be something you'd find useful? We're still in the early stages of development, so any feedback you have would be greatly appreciated. Thanks in advance! -
ChatGPT samples:
Me:
Tell me about an iot program called openLuup.
It:
OpenLuup is an open source home automation system that is built on the VeraLuup platform. It is designed to be easy to install and configure, and provides users with a powerful and versatile way to control their home automation devices. OpenLuup offers a wide range of features, including support for many popular home automation devices, scheduling, scripting, and integration with other services. OpenLuup is designed to be customizable, allowing users to create their own home automation systems. It is an excellent choice for those looking to create their own home automation system without spending a lot of money.
Me:
Write an iot program using openLuup.
It:
--openLuup IoT Program-- -- Initialize Variables -- local device_id = "MyHomeDevice" local temperature_sensor_id = "MyTemperatureSensor" local temperature_threshold = 75 -- Create Devices -- luup.create_device("OpenLuup Temperature Sensor", 0, device_id, "D_GenericSensor1.xml", "I_GenericSensor1.xml", "S_TemperatureSensor1.xml", "") luup.variable_set("urn:upnp-org:serviceId:TemperatureSensor1", "CurrentTemperature", 0, device_id) -- Start Timer -- luup.call_delay("check_temperature", 10, "", false) --Function to Check Temperature-- function check_temperature() local current_temperature = luup.variable_get(temperature_sensor_id, "CurrentTemperature", 0) --Check Temperature Threshold-- if current_temperature >= temperature_threshold then --Send Alert-- luup.call_action("urn:micasaverde-com:serviceId:HomeAutomationGateway1", "SendTextMessage", {PhoneNumber="1234567890", Message="ALERT! Temperature exceeded threshold!"}, 0) end --Reset Timer-- luup.call_delay("check_temperature", 10, "", false) endMe:
Write an iot program using openLuup.
It:
Write an iot program using openLuup. -- openLuup IOT Program -- -- Variables local lampState = false local lampTime = 0 -- Functions function lampTimer() if lampTime > 0 then lampTime = lampTime - 1 if lampTime == 0 then luup.variable_set('urn:upnp-org:serviceId:SwitchPower1', 'Status', 0, lampDeviceID) lampState = false end end end -- Setup luup.call_delay('lampTimer', 60, 0) -- Main Loop while true do -- Check for motion if luup.variable_get('urn:micasaverde-com:serviceId:MotionSensor1', 'Tripped', motionSensorDeviceID) == '1' then if not lampState then luup.variable_set('urn:upnp-org:serviceId:SwitchPower1', 'Status', 1, lampDeviceID) lampState = true -- Set lamp timer to 5 minutes lampTime = 300 end end luup.sleep(1) endWhat??
luup.sleep(1)Not good - looks like I still have some semblance of a job to fulfill.
Me:
An iot program called openLuup was written by akbooer. Who is akbooer?
It: (note: answer redacted and as I understand it, also incorrect re: AltUI):
akbooer is the pseudonym of the software developer and home automation enthusiast. He is the creator of the openLuup home automation software, which is an open-source version of the Vera home automation system. He is also the creator of the AltUI graphical user interface for openLuup.
Me:
Who created of the AltUI graphical user interface for openLuup.
and
Me:
Who created of the AltUI graphical user interface for the home automation system Vera.
Names two different people - mmmm.
Regardless very impressive - give it a few more years.
-
...which I'd like to do. I know I go about these things all wrong (namely think of something I'd like to do, then try and work out what I need to know) but that's me 🙂
Just looking for some pointers on what I should google for really:
What I'd like is to provide a selection of (basically two word) phases which I can select from randomly (or even pseudo randomly) and pass to Alexa to be spoken. There are 10 such phrases only.
So what should I be reading up on to get me started?
TIA for any guidance
C
-
Hi,
I am a student and recently i am working on smart home project and writing a seminar paper about the way users handle and manage IoT devices. I you have 3 min, please fill below survey. Its really short.
Thank you in advance, I really appreciate everyone's help. -
For what it's worth, I've been putting the finishing touches on a much-updated version of my DP Apps spreadsheet -- specifically intended for HE users, at least for now -- and invite you all to take a gander http://bit.ly/hedb23 at the PDF one-page version.
Corrections and edits welcome (esp. for the HOMEKIT column, just added yesterday)! Thanks in advance, especially because I'm not a big dashboard user myself, but somehow accepted this role as "keeper of the list" as it were.
-
Hello guys,
I would like to achieve two different things with lights, but I am not sure it could be done. I am starting with smart things, and I am far from any electrician knowledge, wo any help is really appreciated.
I have dumb switches in my hall, controlled from 3 places. I understood that installing one smart module before first switch will make them "hybrid", both smart controlled and dumb controlled.
I would like to buy ceiling light with two bulb sockets. What I would like to achieve is I would like to have one bulb for normal daily usage (lets say cold white full brightness), and second for night time (aprox from 10pm till morning) with some red/orange - minimum brightness.
So question are:
Is there a way to keep both bulbs turning-on separated? So only one will be on during day, and then only second during night?
And could that be done with pressing dumb switch? What would I need to achieve it? (maybe another module into the ceiling lights)
Thank you in advance
-
Aften some testing I watt to clear KWH how ?
Regards Bjarne
-
Hello,
I have a kitchen light that can be controlled by two switches, using either to turn it off or on. I have been slowly changing things over to be a smart home but this is the first switch I am attempting to install.
I am in a double wide modular home (mobile) that was built in 1994.
At first I thought I would need a 3 way switch but when taking the normal switches apart I realized that was incorrect because the wiring on my switches are different than anything I could find online.
For one a 3 way smart switch requires 5 wires and there are only 2 wires going into the primary switch with 3 wires going into the secondary switch from the primary switch (at least I think the 3 wires connect the two switches together). Images will be attached of the wiring.
There are two wires (one black and one white) going into the first switch and 3 wires (black, white, and red) going out of that and into the second switch (I assume). The odd thing is the red wire going to the second switch is connected to the white wire going into the first switch and the white wire going into the second switch seems to be a bridge wire or a traveler wire. Not exactly sure. You will see what I mean in the images.
I need to know what kind of smart switch I can use in this set up with one remaining a normal switch.
Note that for some reason the images got switched around when uploading them. The image with 2 wires on one side and 3 on the other is what I think is the primary and the image with just 3 wires is the secondary.
Primary.jpg Secondary.jpg -
You lot are more likely to have a view than most I know. Our much used Logitech Harmony is (not so) slowly dying.
And Logitech have discontinued the entire line.
And no one else appears to be making something similar.
Was going for a Sofabaton X1, but no numeric keypad. Sofabaton U1, but no favourites.
Anyone got suggestions?
Needs to have those features, oh and not be only a phone app.....C
-
Since one member asked at one point about the "front end" and "back end", I drew this showing the controller from the base to the tip along with what I have found to be the best options from my testing. Almost every controller will try to integrate all elements, especially commercial ones but... they all have strengths and weaknesses so if one can have a medley of the best ones...
-
New Ezlo Web GUI now in "beta"
-
Ezlo have made an announcement about their new web GUI.
Its very alpha however. Hopefully their dev's can get it in to shape and add our feature requests ?
Can you banned guys still see the screen shots on the threads?
-
@cw-kid Yes, it's all public to read even when not logged in.
-
Getting a 404 when trying to sign in to the ezlogic with either https/http with my Vera credentials though.
-
Another guy has reported that 404 as well.
Are you on a PC rather than phone?
Look at the screen shot I just posted off my phone the site is not dynamic and all messed up on a small screen.
-
@cw-kid I tried Windows 10 Chrome/Edge and iPhone Safari, same error message.
-
Strange then, me and another guy have logged in OK and you and one other guy have the same 404 error so far.
-
I tried both "Login" and "Sign Up" from both an Android as well as PC browser, and that sh*t is completely borked.
Not even going to grace it with another attempt. Is that how alpha those guys are going these days?
-
My account with Ezlo hubs does not work, the one with Vera's does. So not Beta ready imo.
-
Bloody hell. That looks like a typical train wreck. And they then ask you to re-submit all your comments
C
-
Its bare bones for sure. Too soon to have been announced to the community.
It needed more work and testing first for sure.
Several users saying they can't login. I've had zero issues however logging in.
-
@cw-kid said in New Ezlo Web GUI now in "beta":
Its bare bones for sure. Too soon to have been announced to the community.
It needed more work and testing first for sure.
Several users saying they can't login. I've had zero issues however logging in.
A lot of those issues you point out were very very basic, and should never (IMHO) have made it past QA to a public audience. YMMV obviously
C
-
@mrfarmer said in New Ezlo Web GUI now in "beta":
My account with Ezlo hubs does not work, the one with Vera's does
Your the second person I've seen say that.
I just have one Vera account and all my Vera and Ezlo controllers are all on the same account etc.
-
@catmanv2 said in New Ezlo Web GUI now in "beta":
And they then ask you to re-submit all your comments
Who me ? LOL
-
ezlo is sinking or swimming (mostly the former) without the benefit of many highly knowledgeable beta testers due to Forum banning. I would not let my dog's dog submit Feedback reports at this stage. At least their employees are (by necessity!) being a lot more responsive, seeing as all the "free labor" has been evicted.
-
@catmanv2 said in New Ezlo Web GUI now in "beta":
A lot of those issues you point out were very very basic, and should never (IMHO) have made it past QA to a public audience
I know and totally agree, I don't think they have any QA.
-
@cw-kid said in New Ezlo Web GUI now in "beta":
@catmanv2 said in New Ezlo Web GUI now in "beta":
A lot of those issues you point out were very very basic, and should never (IMHO) have made it past QA to a public audience
I know and totally agree, I don't think they have any QA.
Well the used to, but they banned them all
And me
C
-
Yes LOL that's true.
-
I'm sure they will improve it given time, its an alpha release now, despite the post title of beta.
-
I prefer the term "Vaporware" until a pitched product at least becomes accessible to a portion of its target audience. The silence from ezlo's team -- aside from acknowledging customer complaints and new Jira tickets -- is deafening.
-
@librasun said in New Ezlo Web GUI now in "beta":
I prefer the term "Vaporware" until a pitched product at least becomes accessible to a portion of its target audience. The silence from ezlo's team -- aside from acknowledging customer complaints and new Jira tickets -- is deafening.
Plus ca change....
C