Skip to content
  • Categories
  • Recent
  • Tags
  • Popular
  • Unsolved
Collapse
Discussion Forum to share and further the development of home control and automation, independent of platforms.
  1. Home
  2. openLuup
  3. OpenLuup installation
openLuup email server
A

Hello AK

Have been writing about the openLuup email server as I was tinkering with it the other day. One minor problem: it looks like the domain part of the email address eg ...@openLuup.local is case sensitive in openLuup.

Looking round the net, it suggests that the local part is case sensitive but the domain part is not meant to be. To keep things so they are more likely to work, it's suggested the email address should be totally case insensitive regardless. Refer to rfc2821 page 13 or search on the word "sensitive". Suffice to say I was using mail@openluup.local rather than mail@openLuup.local, so it didn't work for me.

Next challenge was that the file saved in /etc/cmh-ludl/mail has "Content-Transfer-Encoding: base64" so the body of the email was encoded:

Received: from ((openLuup.smtp) [ip_address_1] by (openLuup.smtp v18.4.12) [ip_address_2]; Tue, 26 Nov 2024 14:21:22 +1000 From: "dali@switchboard" <dali@switchboard> To: "mail@openLuup.local" <mail@openLuup.local> Subject: Warning form R2E. MIME-Version: 1.0 Content-Type: text/plain Content-Transfer-Encoding: base64 QXV0byBXYXJuaW5nOiBDb2xkIHN0YXJ0IGV2ZW50

The above base 64 text translates to "Auto Warning: Cold start event".

Is it your preference to leave the saved files in the raw mode or would you consider translating the base64 text in the openLuup code base?

On a side note, does the reception of an email by openLuup generate some sort of trigger that can be watched. In the case above; the email represents the restoration of power after a power outage. I would like to know about that by the email triggering a "Telegram" notification on my mobile.

I see that the images@openLuup.local images@openLuup.local can be associated with I_openLuupCamera1.xml, which spawns a movement detector child. Anything similar for the other email addresses?

openLuup Nov 27, 2024, 12:07 PM
Why different types of Triggers within openLuup & ALTUI
P

Sorry if this has been covered before, just curious why triggers in openluup are not consistent..

I looked at a scene i’d created a while back via ALTUI using the Console view and noticed it didn’t show any Triggers, which was strange as it was my main front door event 🙂 . So I added the door tripped trigger again, but I’ve just noticed I now how two tiggers using this view.

25bfe00a-d63e-4dc1-a501-23e779c64379-image.png

In ALTUI it shows this.

9b430cc4-49be-4276-ad36-d1dfdaa1ca47-image.png

openLuup Nov 5, 2024, 5:16 PM
openLuup_install.lua - URL changed?
A

AK. Was doing an openLuup install and the installer errored with:

openLuup_install 2019.02.15 @akbooer getting openLuup version tar file from GitHub branch master... un-zipping download files... getting dkjson.lua... lua5.1: openLuup_install.lua:45: GitHub download failed with code 500 stack traceback: [C]: in function 'assert' openLuup_install.lua:45: in main chunk [C]: ?

The installer code was executing this URL:

http://dkolf.de/src/dkjson-lua.fsl/raw/dkjson.lua?name=16cbc26080996d9da827df42cb0844a25518eeb3

Running it manually gives:

dkolf.de The script could not be run error-free. Please check your error log file for the exact error message. You can find this in the KIS under "Product Management > *YOUR PRODUCT* > *CONFYGUAR* > Logfiles". Further information can be found in our FAQ. The script could not be executed correctly. Please refer to your error log for details about this error. You find it in your KIS under item "Product Admin > *YOUR PRODUCT* > *CONFIGURE* > Logfiles". Further information can also be found in our FAQ.

I'm thinking the dkjson code URL has been changed. On dkolf.de there is a download link:

http://dkolf.de/dkjson-lua/dkjson-2.8.lua

and dkjson code also seems to be in GitHub (I presume this is the same code?):

https://github.com/LuaDist/dkjson/blob/master/dkjson.lua

I'm don't know what dkolf.de looked like previously but I do see the dkjson code has been updated as of 2024-06-17. Hope this helps.

Oh - and by the way the dkjson.lua file seems to have been downloaded OK by the installer - error or no error, so go figure.

openLuup Nov 4, 2024, 2:20 AM
OpenLuup : Loading Global Modules
P

It’s been a while since I looked at openLuup as it had been running nicely and quietly in the background doing some basic tasks. With my VeraPlus looking like it’s finally succumbing to old age, I want to shift a number of the global module I have over to openLuup.

To do this, I have added the files (example would be xxpushover.lua to the cmh-ludl folder and the following to the startup

require “xxpushover”

The xxpushover.lua file itself starts with the following..

module("xxpushover", package.seeall)

And I always have a line in these files to allow me to check it’s been read in the start up related logs, which in this case it is..

The challenge I’m having is that when I try to call any of the functions within the module, it returns the following error..

"[string "ALTUI - LuaRunHandler"]:1: attempt to index global 'xxpushover' (a nil value)”

I’m no doubt missing something obvious, can anyone help me find out what it is ? Many thanks

openLuup Oct 31, 2024, 11:30 PM
openLuup charting and forward slashes in variable names
A

Currently I have some Whisper files used by DataYours that been working well for ages and do what I want.

One of the files is called Watts_L1.d.wsp and uses this retention from "storage_schemas_conf" in openLuup file virtualfilesystem.lua:

[day] pattern = \.d$ retentions = 1m:1d

Inside the actual "Watts_L1.d.wsp" file is a header like so:

1, 86400, 0, 1 84, 60, 1440

The 1, 86400 is one minute & one day (in minutes) as per the retention listed above. As a side issue I would like to know what the other header values mean ie what's the syntax here?

New challenge: I now have three Shelly variables named:

em1/0/act_power
em1/1/act_power
em1/2/act_power

with a device ID of "10006" and a SID of "shellypro3em"

And I would like to plot them using the Historian, just like I do with Watts_L1.d.wsp in DataYours. So I need a file in the history directory for the data. So I looked at doing this:

local whisper = require "openLuup.whisper" -- Syntax: history/0.deviceNumber.shortServiceId.variableName local filename = "history/0.10006.shellypro3em.em1/0/act_power.wsp" local archives = "1m:1d" whisper.create (filename,archives,0)

Problem is that the variable names contains forward slashes, which are invalid filename characters. What to do?

Also should the retentions now be (to suit the latest openLuup software)?:

local archives = "1m:1d,10m:7d,1h:30d,3h:1y,1d:10y"

Also "shellypro3em" is not a "shortServiceID" as per those listed in "servertables.lua". So can "shellypro3em" be used instead? ie can both short and long service IDs be used in the above call to whisper.create?

openLuup Jul 26, 2024, 11:10 AM
openLuup log files - LuaUPnP.log and LuaUPnP_startup.log
J

To try and minimized the frequency of writing to the SD card I want to move these log files to a RAM drive, like I already do with /var/log. Is there an 'official' way of doing this?

_John.

openLuup Jul 21, 2024, 2:23 PM
openLuup: Version Log
A

A list of openLuup releases including the latest developments…

master – stable, and infrequently updated, development – latest updates and bug fixes, testing – use only when advised!

A long while ago (May, 2015) I wrote my 2000-th post on another forum: openLuup - running unmodified plugins on any machine.

Now rehosted at https://community.ezlo.com/t/openluup-running-unmodified-plugins-on-any-machine/187412

Here’s the gist of it:

...I want to work in a more open and stable [Vera] environment...

...All would be solved if Luup was open source and could be run on the plethora of cheap and reliable hardware available today. But it’s not. But we could get something like that effect if we engineered a sufficient subset of Luup to run on such a platform. Could it be done? What would we need?

1. UI
2. scheduler
3. web server
4. Luup compatible API
5. Device and Implementation xml file reader
6. Zwave bridge to Vera
7. runs most plugins without modification

What we wouldn’t need is UPnP.

What have we (nearly) got already?

We have, courtesy of @amg0, the most excellent AltUI: Alternate UI to UI7, and that, I think, is probably the hardest one to do in the above list. Items 2 - 5, and 7, I’ve prototyped, in pure Lua, and posted elsewhere: DataYours on Raspberry Pi, running selected plugins unmodified, including: DataYours, EventWatcher, Netatmo, RBLuaTest, altUI. See screenshot attached.

Is it worth the effort? Probably not. Will I pursue this quest? Yes.

openLuup was the result.

DE2056BF-E548-4611-972B-40276F00BFEB.jpeg

openLuup Apr 9, 2024, 12:12 PM
ZWaveJS and MQTT
A

Re: openLuup: MQTT server

@ronluna

Hoping you could tell us a bit about your experiences with ZWaveJS and MQTT.

ZWave JS UI in MQTT Explorer.png

openLuup Mar 24, 2024, 7:17 PM
Awesome MQTT - GitHub list
A

Akbooer: it would be good if openLuup was added to the awesome mqtt resources list.

How to contribute is described here.

openLuup Feb 25, 2024, 7:58 AM
GetSolarCoords - correct results?
A

Looks like the GetSolarCoords() doesn't return the correct results. Right Ascension (RA) and
Declination (DEC) look OK. They presumably must be, as I have a light that goes on at sunset at the correct time for years.

Altitude and Azimuth look incorrect. They both have the hour angle in common, so I'm wondering if it's incorrect and hence the sidereal time. Should be able to convert the angle to hours and check it against this clock:

sidereal time clock

The formula used looks like Compute sidereal time on this page. Might be some mix up between JD2000 that has a 12 hour offset. Could also be some issue with the hour angle.

I'm assuming all Right Ascension (RA) and
Declination (DEC) are degrees plus & minus from north.

Likewise Altitude (ALT) and Azimuth (AZ) are in degrees?

Bit of caution: I haven't looked at this too closely, so may be barking up the wrong tree. It probably doesn't help living near Greenwich.

This site may also be helpful.

PS did you have a look at the link in my last PM?

openLuup Feb 15, 2024, 5:22 AM
Truncated web pages using wireguard over long distances
A

Set up:

a) Many many many many kms from home: laptop connected to modem router. Router running wireguard client to create a virtual network.

b) Home: modem router running wireguard server. openLuup pi4 connect to router and also a PC and other stuff, etc.

The problem: When accessing charts, AltUI or the openLupp console the web pages are returned OK up to the point where they are truncated and therefore fail to display anything useful.

Note this all works fine over short distances eg around a major city (I tested it) but not seemingly at world wide distances. ie network delays seem to be the issue here? Windows TeamViewer works fine overy the exact same network/wireguard set up. That's how I was able to get the openLuup logs shown below.

Here is any example of openLuup trying to return a chart:

2023-09-04 21:31:20.463 openLuup.io.server:: HTTP:3480 connection from 10.0.0.2 tcp{client}: 0x55aed35038 2023-09-04 21:31:20.464 openLuup.server:: GET /data_request?id=lu_status2&output_format=json&DataVersion=316885191&Timeout=60&MinimumDelay=1500&_=1692128389970 HTTP/1.1 tcp{client}: 0x55ae538348 2023-09-04 21:31:20.465 openLuup.server:: GET /data_request?id=lu_status2&output_format=json&DataVersion=316885191&Timeout=60&MinimumDelay=1500&_=1692129024374 HTTP/1.1 tcp{client}: 0x55addbe1e8 2023-09-04 21:31:20.477 openLuup.server:: GET /data_request?id=lr_render&target={temp_first_floor.w,temp_ground_floor.w,temp_back_wall_of_office.w,temp_inside_roof.w,temp_jps_bedrm_north.w,temp_outside.w}&title=Temperatures&height=750&from=-y&yMin=0&yMax=40 HTTP/1.1 tcp{client}: 0x55aed35038 2023-09-04 21:31:20.478 luup_log:6: DataGraph: drawing mode: connected, draw nulls as: null 2023-09-04 21:31:20.502 luup_log:6: DataGraph: Whisper query: CPU = 23.122 mS for 2016 points 2023-09-04 21:31:20.532 luup_log:6: DataGraph: Whisper query: CPU = 22.952 mS for 2016 points 2023-09-04 21:31:20.561 luup_log:6: DataGraph: Whisper query: CPU = 22.738 mS for 2016 points 2023-09-04 21:31:20.575 luup_log:6: DataGraph: Whisper query: CPU = 9.547 mS for 2016 points 2023-09-04 21:31:20.587 luup_log:6: DataGraph: Whisper query: CPU = 9.569 mS for 2016 points 2023-09-04 21:31:20.598 luup_log:6: DataGraph: Whisper query: CPU = 9.299 mS for 2016 points 2023-09-04 21:31:20.654 luup_log:6: visualization: LineChart(2016x7) 196kB in 51mS 2023-09-04 21:31:20.655 luup_log:6: DataGraph: render: CPU = 51.219 mS for 6x2016=12096 points 2023-09-04 21:31:20.755 openLuup.server:: error 'socket.select() not ready to send tcp{client}: 0x55aed35038' sending 2 bytes to tcp{client}: 0x55aed35038 2023-09-04 21:31:20.855 openLuup.server:: error 'socket.select() not ready to send tcp{client}: 0x55aed35038' sending 6 bytes to tcp{client}: 0x55aed35038 2023-09-04 21:31:21.037 openLuup.server:: error 'socket.select() not ready to send tcp{client}: 0x55aed35038' sending 2 bytes to tcp{client}: 0x55aed35038 2023-09-04 21:31:21.138 openLuup.server:: error 'socket.select() not ready to send tcp{client}: 0x55aed35038' sending 6 bytes to tcp{client}: 0x55aed35038 2023-09-04 21:31:21.332 openLuup.server:: error 'socket.select() not ready to send tcp{client}: 0x55aed35038' sending 2 bytes to tcp{client}: 0x55aed35038 2023-09-04 21:31:21.432 openLuup.server:: error 'socket.select() not ready to send tcp{client}: 0x55aed35038' sending 6 bytes to tcp{client}: 0x55aed35038 2023-09-04 21:31:21.507 openLuup.server:: error 'closed' sending 196367 bytes to tcp{client}: 0x55aed35038 2023-09-04 21:31:21.507 openLuup.server:: ...only 144000 bytes sent 2023-09-04 21:31:21.507 openLuup.server:: error 'closed' sending 2 bytes to tcp{client}: 0x55aed35038 2023-09-04 21:31:21.507 openLuup.server:: ...only 0 bytes sent 2023-09-04 21:31:21.507 openLuup.server:: error 'closed' sending 5 bytes to tcp{client}: 0x55aed35038 2023-09-04 21:31:21.507 openLuup.server:: ...only 0 bytes sent 2023-09-04 21:31:21.507 openLuup.server:: request completed (196367 bytes, 10 chunks, 1030 ms) tcp{client}: 0x55aed35038 2023-09-04 21:31:21.517 openLuup.io.server:: HTTP:3480 connection closed openLuup.server.receive closed tcp{client}: 0x55aed35038 2023-09-04 21:31:22.824 openLuup.io.server:: HTTP:3480 connection from 10.0.0.2 tcp{client}: 0x55aea22c88

Re: socket.select() not ready to send

Is there some sort of timeout I change; to see if this can make this work?

Note that openLuup is still running everything flawlessly for ages now, including the more recent addtions of ZigBee stuff. Much appreciated.

openLuup Sep 23, 2023, 3:46 PM
Console view: - No Live refreshes via :3480/console?page=devices
P

Hi @akbooer

Just bringing this over as suggested..

I’ve started to use the console view a lot more, mainly for it’s look and simplicity , but I noticed it does not do any live updates compared to ALTUI, you have to do a full browser reload. Is that by design, or is mine not working?

Also if I want to go strait to the console view, rather than into ALTUI, I recall seeing something abut altering that in the guide by for the life of me I can’t find it. Is it possible to do, if so how would I do that..

You suggested this was something you were looking at ? Also you said You don't need a "full browser reload", just click on the display menu item to refresh the screen. - what do you mean by `display menu?

openLuup Mar 9, 2023, 8:52 AM
openLuup and room names
A

Very minor issue: was messing about renaming a few rooms and ended up with a room being listed twice. One with the room's contents and the other with no room contents.

It simply turns out one room name had a trailing space. It is possible in both AltUI and the openLuup console to create a room name with a trailing space. Once having done so chaos then ensues, as the rooms are not necessarily treated as different and become difficult to manipulate.

Just need to trim white space off room names. Haven't tested if it's possible to add in leading spaces. That may also be possible.

openLuup Jan 6, 2023, 11:43 AM
Need to get rid of RulesEngine
DesTD

Hey guys...

Long time... 😉

Since my first day with Vera, I'm using RulesEngine from @vosmont to handle complex rules that will do something based on multiple condition base on "true/false" and also based on time.

Do you think I will be able to do that directly with LUA in openLuup ?

For example..

IF bedroom-motion1 is not detecting motion for 15 minutes
AND
IF bedroom-motion2 is not detecting motion for 15 minutes
AND
IF current-time is between 6am and 11pm
AND
IF binary-light1 is OFF
AND
IF binary-light2 is OFF
THEN
execute LUA code
WAIT 2 minute
execute LUA code

BUT IF any "conditions" failed while in the "THEN" , It need to stop...

I currently have around 60 rules like that 😞

openLuup Jan 3, 2023, 3:39 PM
Migrating Zwave & ZigBee stuff to MQTT - guidance needed.
A

Currently I have a Vera and Hue hub all reliably controlled by openLuup with AltUI, plus any number of plugins. Been working really well for a few years now. However would like to head for a more MQTT based set up. Eliminate the Hue hub and hopefully eliminate Vera by using ZWAVE JS UI. Noting that Zwavejs2mqtt has been renamed to Z-Wave JS UI. Probably also run the stuff using Docker. Just because. Everything would end up on the one computer for easier management. Erhhh that's the hope.

Some of the new Zigbee Aqara stuff is very good and inexpensive plus it fits in with HomeKit. Also the Aqara battery powered stuff looks to have a good battery lifetime: ie suggested up to five years. The battery operated Hue buttons I have; have lasted for ages. Would like to use zigbee2mqtt with a SonOff dongle, which would allow access to the over two and half thousand devices zigbee2mqtt now supports:

Zigbee2MQTT

AK has the MQTT stuff working in openLuup. Have played around with it and it works well, as one would expect. Love the UDP to MQTT code.

Shellys are great and also very inexpensive and they spit out & accept MQTT but I would prefer to stay away from WiFi. Not meshed and higher power consumption. Horses for courses.

Now here's the query:
Got about forty or more ZWave twin light switches, plus a few other ZWave bits & pieces such as blind controllers. Then there are the Hue devices on top of that. That's a lot of virtual devices to set up in openLuup. What's an appropriate way to do this?

It seems there is no "auto magic bridge set up". Do I need to use say @therealdb's Virtual Devices plugin that supports MQTT or is there some other approach?

I have to confess I still don't understand the master child approach in that plugin. Seems one light switch would have all the other light switches hanging off it? Helps Vera but not a problem with openLuup - why is that? Suspect AK's good coding beats Vera's?

GitHub - dbochicchio/vera-VirtualDevices: Virtual HTTP Devices plug-in for Vera and openLuup GitHub - dbochicchio/vera-VirtualDevices: Virtual HTTP Devices plug-in for Vera and openLuup

Virtual HTTP Devices plug-in for Vera and openLuup - dbochicchio/vera-VirtualDevices

Setting up manually say 100 virtual devices is a bit much to ask. I had a look at hacking the user_data.json file. Good approach till you see all the UIDs and the individually numbered ControlURL and EventURLs that need to be set up.

I need some way of say of creating about 80 light switches in "No room" or in say the "ZWave upgrade" room. Or say some sort of code that could go through all my existing bridged ZWAVE devices in openLuup and create virtual devices for each one. I caould then use the openLuup console to name them and place them in their rooms:

openLuup_IP_address:3480/console?page=devices_table

At that point I could hack the user_data.json file to insert the MQTT topics fairly easily for each? Plus any other fine tuning needed.

Then the old ZWave stuff could be swapped over to ZWAVE JS UI and all the virtual MQTT devices would be ready to go or am I dreaming? Then delete all the old Vera bridged stuff. I'm not too fussed about scene code and the like, as a I have all my code in one block, that is set up in the openLuup start up.

It seems that with ZWay you can create all the ZWave device by doing some sort of interrogation of ZWay's API? Seems also to be the case with the Shelleys?

So any ideas, suggestions or code snippets are welcome on how to move towards MQTT and in particular ZWAVE JS UI and zigbee2mqtt.

I'm in no hurry as openLuup is performing nicely, with the old Vera handling all my ZWave devices.

openLuup Dec 16, 2022, 11:00 PM
DisplayLine1 & 2 - Ability to align text?
P

Hi

Just wondering if it’s possible when writing plugins to set if the text shown via DisplayLine1/2 can be left, right or centre aligned ?

openLuup Dec 10, 2022, 6:08 PM
AltUI access over VPN
C

Bit of an odd one this:
Bare metal install on Debian Bullseye (Intel NUC)

I've noticed when travelling, I connect to my L2TP VPN and I cannot get AltUI to update. I just get 'Waiting Initial Data'

Specifically this is in Chrome:
Version 108.0.5359.94 (Official Build) (x86_64)
In Chrome I can access and control everything via the Openluup console.
In Chrome I can also access and control everything via the Z-Wave expert UI and Z-Wave UI

In Safari I get a more complete view of AltUI but loads of errors along the lines of:
the module or function ALTUI_PluginDisplays.drawBinaryLight does not exist, check your configuration

Homewave on my iOS devices is fine across the same VPN config,
I can ssh into all my servers

Not a huge issue, just curious if anyone has any thoughts of what I might tweak to resolve it?

(FWIW I also access my IMAP and SMTP servers across the same VPN with no issues, as well as remote desktop. Also MS Reactor on the same host as Openluup)

TIA for any thoughts

C

openLuup Dec 10, 2022, 9:55 AM
Problem with luup.call_delay nexted in luup.call_timer
M

Hi Ak,

Not sure when it started as it took me a while to notice.

I have a function on a luup.call_timer to turn on a switch and then use a luup.call_delay to turn it off a minute later. This is done by the same global function, but on the luup.call_delay i get a message in the log : "luup.call_delay:: unknown global function name: HouseDevice1_PumpCommand"

This is in the init function:

luup.call_timer("HouseDevice1_PumpCommand", 2, "2:15:00", hm_Heating.PumpHealthRunDay, hm_Heating.PumpCMD.HEALTH.."1", true)

This is in the function to schedule to off command giving the global function name not found:

luup.call_delay("HouseDevice1_PumpCommand", hm_Heating.PumpHealthOnDuration, hm_Heating.PumpCMD.HEALTH.."0")

Is it because I use the "TRUE" parameter that is openLuup specific so the timer does not fire just once?

Running v21.7.25, may be time to update?

Cheers Rene

openLuup Sep 9, 2022, 10:44 AM
OpenLuup installation
N

Hi, I have been trying to install OpenLuup on MacOS but I am failing, so far.
Is there a step-by-step instruction (for MacOS) to follow?

After installing LuaRocks, luasec, luafilesystem and luasocket I then try to run lua5.1 openLuup_install.lua and then get the messages below.

Any ideas and proposals are appreciated.

Regards
Jan

openLuup_install 2019.02.15 @akbooer
lua5.1: openLuup_install.lua:18: module ‘socket.http’ not found:
no field package.preload[‘socket.http’]
no file ‘./socket/http.lua’
no file ‘/usr/local/share/lua/5.1/socket/http.lua’
no file ‘/usr/local/share/lua/5.1/socket/http/init.lua’
no file ‘/usr/local/lib/lua/5.1/socket/http.lua’
no file ‘/usr/local/lib/lua/5.1/socket/http/init.lua’
no file ‘./socket/http.so’
no file ‘/usr/local/lib/lua/5.1/socket/http.so’
no file ‘/usr/local/lib/lua/5.1/loadall.so’
no file ‘./socket.so’
no file ‘/usr/local/lib/lua/5.1/socket.so’
no file ‘/usr/local/lib/lua/5.1/loadall.so’
stack traceback:
[C]: in function ‘require’
openLuup_install.lua:18: in main chunk

openLuup Sep 3, 2022, 10:33 AM
Unexpected stop of openLuup
CrilleC

Every now and then my openLuup stops responding. This is the LuaUPnP.log when it happens:

2021-08-20 14:59:39.827 :: openLuup LOG ROTATION :: (runtime 11.0 days) 2021-08-20 14:59:39.831 openLuup.server:: GET /data_request?id=sdata HTTP/1.1 tcp{client}: 0x55b6023b8088 2021-08-20 14:59:39.853 openLuup.server:: request completed (49215 bytes, 4 chunks, 22 ms) tcp{client}: 0x55b6023b8088 2021-08-20 14:59:39.854 openLuup.io.server:: HTTP:3480 connection closed openLuup.server.receive closed tcp{client}: 0x55b6023b8088 2021-08-20 14:59:40.826 openLuup.io.server:: HTTP:3480 connection from 127.0.0.1 tcp{client}: 0x55b600f46ab8 2021-08-20 14:59:40.829 openLuup.server:: GET /data_request?id=sdata HTTP/1.1 tcp{client}: 0x55b600f46ab8 2021-08-20 14:59:40.846 openLuup.server:: request completed (49215 bytes, 4 chunks, 16 ms) tcp{client}: 0x55b600f46ab8 2021-08-20 14:59:40.847 openLuup.io.server:: HTTP:3480 connection closed openLuup.server.receive closed tcp{client}: 0x55b600f46ab8 2021-08-20 14:59:41.827 openLuup.io.server:: HTTP:3480 connection from 127.0.0.1 tcp{client}: 0x55b600d1ad98 2021-08-20 14:59:41.829 openLuup.server:: GET /data_request?id=sdata HTTP/1.1 tcp{client}: 0x55b600d1ad98 2021-08-20 14:59:41.838 openLuup.server:: request completed (49215 bytes, 4 chunks, 8 ms) tcp{client}: 0x55b600d1ad98 2021-08-20 14:59:41.838 openLuup.io.server:: HTTP:3480 connection closed openLuup.server.receive closed tcp{client}: 0x55b600d1ad98 2021-08-20 14:59:42.827 openLuup.io.server:: HTTP:3480 connection from 127.0.0.1 tcp{client}: 0x55b6016b9848 2021-08-20 14:59:42.829 openLuup.server:: GET /data_request?id=sdata HTTP/1.1 tcp{client}: 0x55b6016b9848 2021-08-20 14:59:42.847 openLuup.server:: request completed (49215 bytes, 4 chunks, 17 ms) tcp{client}: 0x55b6016b9848 2021-08-20 14:59:42.876 openLuup.io.server:: HTTP:3480 connection closed openLuup.server.receive closed tcp{client}: 0x55b6016b9848 2021-08-20 14:59:43.054 luup.watch_callback:: 30003.DS18B20.Temperature called [37]virtualSensorWatchCallback() function: 0x55b600c2fff0 2021-08-20 14:59:43.054 luup.variable_set:: 38.urn:toggledbits-com:serviceId:VirtualSensor1.PreviousRawValue was: 28.3 now: 28.5 #hooks:0 2021-08-20 14:59:43.054 luup.variable_set:: 38.urn:toggledbits-com:serviceId:VirtualSensor1.RawValue was: 28.5 now: 28.4 #hooks:0 2021-08-20 14:59:43.054 luup.variable_set:: 38.urn:upnp-org:serviceId:TemperatureSensor1.CurrentTemperature was: 28.5 now: 28.4 #hooks:0 2021-08-20 14:59:43.054 luup.variable_set:: 38.urn:toggledbits-com:serviceId:VirtualSensor1.PreviousValue was: 28.3 now: 28.5 #hooks:0 2021-08-20 14:59:43.054 luup.variable_set:: 38.urn:toggledbits-com:serviceId:VirtualSensor1.LastUpdate was: 1629464323 now: 1629464383 #hooks:0 2021-08-20 14:59:43.265 openLuup.server:: request completed (3193 bytes, 1 chunks, 5550 ms) tcp{client}: 0x55b60162e488 2021-08-20 14:59:43.267 openLuup.io.server:: HTTP:3480 connection closed openLuup.server.receive closed tcp{client}: 0x55b60162e488 2021-08-20 14:59:43.278 openLuup.io.server:: HTTP:3480 connection from 127.0.0.1 tcp{client}: 0x55b6023c8458 2021-08-20 14:59:43.278 openLuup.server:: GET /data_request?id=status&DataVersion=516611499&Timeout=15&MinimumDelay=100&output_format=json&_r=1629464383277 HTTP/1.1 tcp{client}: 0x55b6023c8458 2021-08-20 14:59:43.381 openLuup.server:: request completed (1091 bytes, 1 chunks, 102 ms) tcp{client}: 0x55b6023c8458 2021-08-20 14:59:43.381 openLuup.io.server:: HTTP:3480 connection closed openLuup.server.receive closed tcp{client}: 0x55b6023c8458 2021-08-20 14:59:43.392 openLuup.io.server:: HTTP:3480 connection from 127.0.0.1 tcp{client}: 0x55b6013d6cc8 2021-08-20 14:59:43.393 openLuup.server:: GET /data_request?id=status&DataVersion=516611500&Timeout=15&MinimumDelay=100&output_format=json&_r=1629464383391 HTTP/1.1 tcp{client}: 0x55b6013d6cc8 2021-08-20 14:59:43.496 openLuup.server:: request completed (3196 bytes, 1 chunks, 4981 ms) tcp{client}: 0x55b601a37db8 2021-08-20 14:59:43.826 openLuup.io.server:: HTTP:3480 connection from 127.0.0.1 tcp{client}: 0x55b601d05a08 2021-08-20 14:59:43.828 openLuup.server:: GET /data_request?id=sdata HTTP/1.1 tcp{client}: 0x55b601d05a08 2021-08-20 14:59:43.844 openLuup.server:: request completed (49215 bytes, 4 chunks, 15 ms) tcp{client}: 0x55b601d05a08 2021-08-20 14:59:43.844 openLuup.io.server:: HTTP:3480 connection closed openLuup.server.receive closed tcp{client}: 0x55b601d05a08 2021-08-20 14:59:44.524 openLuup.server:: GET /data_request?id=lu_status2&output_format=json&DataVersion=516611500&Timeout=60&MinimumDelay=1500&_=1629292536029 HTTP/1.1 tcp{client}: 0x55b601a37db8 2021-08-20 14:59:44.828 openLuup.io.server:: HTTP:3480 connection from 127.0.0.1 tcp{client}: 0x55b6023a7d18 2021-08-20 14:59:44.831 openLuup.server:: GET /data_request?id=sdata HTTP/1.1 tcp{client}: 0x55b6023a7d18 2021-08-20 14:59:44.844 openLuup.server:: request completed (49215 bytes, 4 chunks, 12 ms) tcp{client}: 0x55b6023a7d18 2021-08-20 14:59:44.844 openLuup.io.server:: HTTP:3480 connection closed openLuup.server.receive closed tcp{client}: 0x55b6023a7d18 2021-08-20 14:59:45.514 openLuup.server:: GET /data_request?id=variableget&DeviceNum=0&serviceId=urn:micasaverde-com:serviceId:HomeAutomationGateway1&Variable=Mode&_=1629292536030 HTTP/1.1 tcp{client}: 0x55b601ab8228 2021-08-20 14:59:45.617 openLuup.server:: request completed (1 bytes, 1 chunks, 102 ms) tcp{client}: 0x55b601ab8228 2021-08-20 14:59:45.827 openLuup.io.server:: HTTP:3480 connection from 127.0.0.1 tcp{client}: 0x55b600b8de38 2021-08-20 14:59:45.828 openLuup.server:: GET /data_request?id=sdata HTTP/1.1 tcp{client}: 0x55b600b8de38 2021-08-20 14:59:45.834 openLuup.server:: request completed (49215 bytes, 4 chunks, 5 ms) tcp{client}: 0x55b600b8de38 2021-08-20 14:59:45.836 openLuup.io.server:: HTTP:3480 connection closed openLuup.server.receive closed tcp{client}: 0x55b600b8de38 2021-08-20 14:59:46.828 openLuup.io.server:: HTTP:3480 connection from 127.0.0.1 tcp{client}: 0x55b6018a53f8 2021-08-20 14:59:46.830 openLuup.server:: GET /data_request?id=sdata HTTP/1.1 tcp{client}: 0x55b6018a53f8 2021-08-20 14:59:46.841 openLuup.server:: request completed (49215 bytes, 4 chunks, 11 ms) tcp{client}: 0x55b6018a53f8 2021-08-20 14:59:46.842 openLuup.io.server:: HTTP:3480 connection closed openLuup.server.receive closed tcp{client}: 0x55b6018a53f8 2021-08-20 14:59:47.829 openLuup.io.server:: HTTP:3480 connection from 127.0.0.1 tcp{client}: 0x55b600d2d938 2021-08-20 14:59:47.832 openLuup.server:: GET /data_request?id=sdata HTTP/1.1 tcp{client}: 0x55b600d2d938 2021-08-20 14:59:47.854 openLuup.server:: request completed (49215 bytes, 4 chunks, 21 ms) tcp{client}: 0x55b600d2d938 2021-08-20 14:59:47.855 openLuup.io.server:: HTTP:3480 connection closed openLuup.server.receive closed tcp{client}: 0x55b600d2d938 2021-08-20 14:59:47.962 luup.variable_set:: 10086.urn:upnp-org:serviceId:TemperatureSensor1.CurrentTemperature was: 28.3 now: 28.5 #hooks:0 2021-08-20 14:59:48.370 openLuup.server:: request completed (1359 bytes, 1 chunks, 4977 ms) tcp{client}: 0x55b6013d6cc8 2021-08-20 14:59:48.372 openLuup.server:: request completed (1359 bytes, 1 chunks, 3847 ms) tcp{client}: 0x55b601a37db8 2021-08-20 14:59:48.373 openLuup.io.server:: HTTP:3480 connection closed openLuup.server.receive closed tcp{client}: 0x55b6013d6cc8 2021-08-20 14:59:48.384 openLuup.io.server:: HTTP:3480 connection from 127.0.0.1 tcp{client}: 0x55b601e62df8 2021-08-20 14:59:48.385 openLuup.server:: GET /data_request?id=status&DataVersion=516611502&Timeout=15&MinimumDelay=100&output_format=json&_r=1629464388383 HTTP/1.1 tcp{client}: 0x55b601e62df8 2021-08-20 14:59:48.813 openLuup.server:: GET /data_request?id=lu_status2&output_format=json&DataVersion=516611502&Timeout=60&MinimumDelay=1500&_=1629292536031 HTTP/1.1 tcp{client}: 0x55b601a37db8 2021-08-20 14:59:48.829 openLuup.io.server:: HTTP:3480 connection from 127.0.0.1 tcp{client}: 0x55b600c44bf8 2021-08-20 14:59:48.832 openLuup.server:: GET /data_request?id=sdata HTTP/1.1 tcp{client}: 0x55b600c44bf8 2021-08-20 14:59:48.854 openLuup.server:: request completed (49215 bytes, 4 chunks, 21 ms) tcp{client}: 0x55b600c44bf8 2021-08-20 14:59:48.856 openLuup.io.server:: HTTP:3480 connection closed openLuup.server.receive closed tcp{client}: 0x55b600c44bf8 2021-08-20 14:59:49.829 openLuup.io.server:: HTTP:3480 connection from 127.0.0.1 tcp{client}: 0x55b600e1fea8 2021-08-20 14:59:49.830 openLuup.server:: GET /data_request?id=sdata HTTP/1.1 tcp{client}: 0x55b600e1fea8 2021-08-20 14:59:49.835 openLuup.server:: request completed (49215 bytes, 4 chunks, 5 ms) tcp{client}: 0x55b600e1fea8 2021-08-20 14:59:49.835 openLuup.io.server:: HTTP:3480 connection closed openLuup.server.receive closed tcp{client}: 0x55b600e1fea8 2021-08-20 14:59:50.831 openLuup.io.server:: HTTP:3480 connection from 127.0.0.1 tcp{client}: 0x55b601cfa118 2021-08-20 14:59:50.832 openLuup.server:: GET /data_request?id=sdata HTTP/1.1 tcp{client}: 0x55b601cfa118 2021-08-20 14:59:50.837 openLuup.server:: request completed (49215 bytes, 4 chunks, 4 ms) tcp{client}: 0x55b601cfa118 2021-08-20 14:59:50.838 openLuup.io.server:: HTTP:3480 connection closed openLuup.server.receive closed tcp{client}: 0x55b601cfa118 2021-08-20 14:59:51.833 openLuup.io.server:: HTTP:3480 connection from 127.0.0.1 tcp{client}: 0x55b601462bb8 2021-08-20 14:59:51.835 openLuup.server:: GET /data_request?id=sdata HTTP/1.1 tcp{client}: 0x55b601462bb8 2021-08-20 14:59:51.852 openLuup.server:: request completed (49215 bytes, 4 chunks, 17 ms) tcp{client}: 0x55b601462bb8 2021-08-20 14:59:51.854 openLuup.io.server:: HTTP:3480 connection closed openLuup.server.receive closed tcp{client}: 0x55b601462bb8 2021-08-20 14:59:52.834 openLuup.io.server:: HTTP:3480 connection from 127.0.0.1 tcp{client}: 0x55b6016b1c98 2021-08-20 14:59:52.836 openLuup.server:: GET /data_request?id=sdata HTTP/1.1 tcp{client}: 0x55b6016b1c98 2021-08-20 14:59:52.847 openLuup.server:: request completed (49215 bytes, 4 chunks, 11 ms) tcp{client}: 0x55b6016b1c98 2021-08-20 14:59:52.848 openLuup.io.server:: HTTP:3480 connection closed openLuup.server.receive closed tcp{client}: 0x55b6016b1c98 2021-08-20 14:59:53.193 luup.variable_set:: 10005.urn:micasaverde-com:serviceId:SceneController1.sl_SceneActivated was: 255 now: 255 #hooks:0 2021-08-20 14:59:53.193 luup.variable_set:: 10006.urn:micasaverde-com:serviceId:HaDevice1.sl_TamperAlarm was: 0 now: 0 #hooks:0 2021-08-20 14:59:53.193 luup.variable_set:: 10094.urn:micasaverde-com:serviceId:HaDevice1.sl_BatteryAlarm was: 0 now: 0 #hooks:0 2021-08-20 14:59:53.193 luup.variable_set:: 10096.urn:micasaverde-com:serviceId:HaDevice1.sl_BatteryAlarm was: 10 now: 10 #hooks:0 2021-08-20 14:59:53.193 luup.variable_set:: 10098.urn:micasaverde-com:serviceId:HaDevice1.sl_BatteryAlarm was: 10 now: 10 #hooks:0 2021-08-20 14:59:53.193 luup.variable_set:: 10104.urn:micasaverde-com:serviceId:HaDevice1.sl_BatteryAlarm was: 10 now: 10 #hooks:0 2021-08-20 14:59:53.194 luup.variable_set:: 10106.urn:micasaverde-com:serviceId:HaDevice1.sl_BatteryAlarm was: 0 now: 0 #hooks:0 2021-08-20 14:59:53.194 luup.variable_set:: 10109.urn:micasaverde-com:serviceId:HaDevice1.sl_BatteryAlarm was: 0 now: 0 #hooks:0 2021-08-20 14:59:53.194 luup.variable_set:: 10112.urn:micasaverde-com:serviceId:DoorLock1.sl_UserCode was: UserID="4" UserName="Ella" now: UserID="4" UserName="Ella" #hooks:0 2021-08-20 14:59:53.194 luup.variable_set:: 10112.urn:micasaverde-com:serviceId:DoorLock1.sl_LockButton was: 1 now: 1 #hooks:0 2021-08-20 14:59:53.194 luup.variable_set:: 10112.urn:micasaverde-com:serviceId:DoorLock1.sl_PinFailed was: 1 now: 1 #hooks:0 2021-08-20 14:59:53.194 luup.variable_set:: 10112.urn:micasaverde-com:serviceId:HaDevice1.sl_BatteryAlarm was: 0 now: 0 #hooks:0 2021-08-20 14:59:53.194 luup.variable_set:: 10131.urn:micasaverde-com:serviceId:HaDevice1.sl_TamperAlarm was: 0 now: 0 #hooks:0 2021-08-20 14:59:53.194 luup.variable_set:: 10132.urn:micasaverde-com:serviceId:HaDevice1.sl_TamperAlarm was: 0 now: 0 #hooks:0 2021-08-20 14:59:53.194 luup.variable_set:: 10133.urn:micasaverde-com:serviceId:HaDevice1.sl_TamperAlarm was: 0 now: 0 #hooks:0 2021-08-20 14:59:53.194 luup.variable_set:: 10165.urn:micasaverde-com:serviceId:HaDevice1.sl_Alarm was: SMOKE now: SMOKE #hooks:0 2021-08-20 14:59:53.194 luup.variable_set:: 10165.urn:micasaverde-com:serviceId:HaDevice1.sl_TamperAlarm was: 0 now: 0 #hooks:0 2021-08-20 14:59:53.194 luup.variable_set:: 10188.urn:micasaverde-com:serviceId:HaDevice1.sl_TamperAlarm was: 1 now: 1 #hooks:0 2021-08-20 14:59:53.194 luup.variable_set:: 10188.urn:micasaverde-com:serviceId:HaDevice1.sl_Alarm was: TAMPER_ALARM now: TAMPER_ALARM #hooks:0 2021-08-20 14:59:53.194 luup.variable_set:: 10191.urn:micasaverde-com:serviceId:HaDevice1.sl_BatteryAlarm was: 10 now: 10 #hooks:0 2021-08-20 14:59:53.299 openLuup.server:: request completed (5449 bytes, 1 chunks, 4485 ms) tcp{client}: 0x55b601a37db8 2021-08-20 14:59:53.505 openLuup.server:: request completed (5449 bytes, 1 chunks, 5119 ms) tcp{client}: 0x55b601e62df8 2021-08-20 14:59:53.511 openLuup.io.server:: HTTP:3480 connection closed openLuup.server.receive closed tcp{client}: 0x55b601e62df8 2021-08-20 14:59:53.513 openLuup.server:: GET /data_request?id=lu_status2&output_format=json&DataVersion=516611523&Timeout=60&MinimumDelay=1500&_=1629292536032 HTTP/1.1 tcp{client}: 0x55b601a37db8 2021-08-20 14:59:53.522 openLuup.io.server:: HTTP:3480 connection from 127.0.0.1 tcp{client}: 0x55b600bc7068 2021-08-20 14:59:53.524 openLuup.server:: GET /data_request?id=status&DataVersion=516611523&Timeout=15&MinimumDelay=100&output_format=json&_r=1629464393521 HTTP/1.1 tcp{client}: 0x55b600bc7068 2021-08-20 14:59:53.834 openLuup.io.server:: HTTP:3480 connection from 127.0.0.1 tcp{client}: 0x55b601b8cbe8 2021-08-20 14:59:53.835 openLuup.server:: GET /data_request?id=sdata HTTP/1.1 tcp{client}: 0x55b601b8cbe8 2021-08-20 14:59:53.840 openLuup.server:: request completed (49215 bytes, 4 chunks, 5 ms) tcp{client}: 0x55b601b8cbe8 2021-08-20 14:59:53.841 openLuup.io.server:: HTTP:3480 connection closed openLuup.server.receive closed tcp{client}: 0x55b601b8cbe8 2021-08-20 14:59:54.834 openLuup.io.server:: HTTP:3480 connection from 127.0.0.1 tcp{client}: 0x55b6013dacd8 2021-08-20 14:59:54.836 openLuup.server:: GET /data_request?id=sdata HTTP/1.1 tcp{client}: 0x55b6013dacd8 2021-08-20 14:59:54.849 openLuup.server:: request completed (49215 bytes, 4 chunks, 12 ms) tcp{client}: 0x55b6013dacd8 2021-08-20 14:59:54.850 openLuup.io.server:: HTTP:3480 connection closed openLuup.server.receive closed tcp{client}: 0x55b6013dacd8 2021-08-20 14:59:55.835 openLuup.io.server:: HTTP:3480 connection from 127.0.0.1 tcp{client}: 0x55b602316198 2021-08-20 14:59:55.836 openLuup.server:: GET /data_request?id=sdata HTTP/1.1 tcp{client}: 0x55b602316198 2021-08-20 14:59:55.841 openLuup.server:: request completed (49215 bytes, 4 chunks, 5 ms) tcp{client}: 0x55b602316198 2021-08-20 14:59:55.842 openLuup.io.server:: HTTP:3480 connection closed openLuup.server.receive closed tcp{client}: 0x55b602316198 2021-08-20 15:00:10.955 openLuup.io.server:: HTTP:3480 connection from 127.0.0.1 tcp{client}: 0x55b601547598 2021-08-20 15:00:10.955 openLuup.io.server:: HTTP:3480 connection from 127.0.0.1 tcp{client}: 0x55b6016c7cf8 2021-08-20 15:00:10.955 openLuup.io.server:: HTTP:3480 connection from 127.0.0.1 tcp{client}: 0x55b600b75158 2021-08-20 15:00:10.955 openLuup.io.server:: HTTP:3480 connection from 127.0.0.1 tcp{client}: 0x55b60187d188 2021-08-20 15:00:10.955 openLuup.io.server:: HTTP:3480 connection from 127.0.0.1 tcp{client}: 0x55b6011a5bf8 2021-08-20 15:00:10.955 openLuup.io.server:: HTTP:3480 connection from 127.0.0.1 tcp{client}: 0x55b60115ecd8 2021-08-20 15:00:10.955 openLuup.io.server:: HTTP:3480 connection from 127.0.0.1 tcp{client}: 0x55b601018c18 2021-08-20 15:00:10.956 openLuup.io.server:: HTTP:3480 connection from 127.0.0.1 tcp{client}: 0x55b60175d068 2021-08-20 15:00:10.956 openLuup.io.server:: HTTP:3480 connection from 127.0.0.1 tcp{client}: 0x55b60224ced8 2021-08-20 15:00:10.956 openLuup.io.server:: HTTP:3480 connection from 127.0.0.1 tcp{client}: 0x55b6017869d8 2021-08-20 15:00:10.956 openLuup.io.server:: HTTP:3480 connection from 127.0.0.1 tcp{client}: 0x55b601ab40e8 2021-08-20 15:00:10.956 openLuup.io.server:: HTTP:3480 connection from 127.0.0.1 tcp{client}: 0x55b601914178 2021-08-20 15:00:10.956 openLuup.io.server:: HTTP:3480 connection from 127.0.0.1 tcp{client}: 0x55b60100a228 2021-08-20 15:00:10.956 openLuup.io.server:: HTTP:3480 connection from 127.0.0.1 tcp{client}: 0x55b60197a998 2021-08-20 15:00:10.956 openLuup.io.server:: HTTP:3480 connection from 127.0.0.1 tcp{client}: 0x55b601103238 2021-08-20 15:00:10.956 openLuup.io.server:: MQTT:1888 connection from 127.0.0.1 tcp{client}: 0x55b600c62438 2021-08-20 15:00:10.956 openLuup.io.server:: MQTT:1888 connection from 127.0.0.1 tcp{client}: 0x55b601eaabf8 2021-08-20 15:00:10.956 openLuup.io.server:: MQTT:1888 connection from 127.0.0.1 tcp{client}: 0x55b6017c95b8 2021-08-20 15:00:10.956 openLuup.io.server:: MQTT:1888 connection from 127.0.0.1 tcp{client}: 0x55b600d6e508 2021-08-20 15:00:10.956 openLuup.io.server:: MQTT:1888 connection from 127.0.0.1 tcp{client}: 0x55b601dd2168 2021-08-20 15:00:10.956 openLuup.io.server:: MQTT:1888 connection from 127.0.0.1 tcp{client}: 0x55b60155eb68 2021-08-20 15:00:10.957 openLuup.io.server:: MQTT:1888 connection from 127.0.0.1 tcp{client}: 0x55b6016ddcd8 2021-08-20 15:00:10.957 openLuup.io.server:: MQTT:1888 connection from 127.0.0.1 tcp{client}: 0x55b602384ca8 2021-08-20 15:00:10.957 openLuup.io.server:: MQTT:1888 connection from 127.0.0.1 tcp{client}: 0x55b60230cc78 2021-08-20 15:00:10.957 openLuup.io.server:: MQTT:1888 connection from 127.0.0.1 tcp{client}: 0x55b6017e3338 2021-08-20 15:00:10.957 openLuup.io.server:: MQTT:1888 connection from 127.0.0.1 tcp{client}: 0x55b600965de8 2021-08-20 15:00:10.957 openLuup.io.server:: MQTT:1888 connection from 127.0.0.1 tcp{client}: 0x55b601e23608 2021-08-20 15:00:10.957 openLuup.io.server:: MQTT:1888 connection from 127.0.0.1 tcp{client}: 0x55b6018da2f8 2021-08-20 15:00:10.957 openLuup.io.server:: MQTT:1888 connection from 127.0.0.1 tcp{client}: 0x55b600c9aa08 2021-08-20 15:00:10.957 openLuup.io.server:: MQTT:1888 connection from 127.0.0.1 tcp{client}: 0x55b600bbf0f8 2021-08-20 15:00:10.957 openLuup.io.server:: MQTT:1888 connection from 127.0.0.1 tcp{client}: 0x55b601334518 2021-08-20 15:00:10.958 openLuup.io.server:: MQTT:1888 connection from 127.0.0.1 tcp{client}: 0x55b60183b5f8 2021-08-20 15:00:10.958 openLuup.io.server:: MQTT:1888 connection from 127.0.0.1 tcp{client}: 0x55b6015682a8 2021-08-20 15:00:10.958 openLuup.io.server:: MQTT:1888 connection from 127.0.0.1 tcp{client}: 0x55b6018869e8 2021-08-20 15:00:10.958 openLuup.io.server:: MQTT:1888 connection from 127.0.0.1 tcp{client}: 0x55b6008839c8 2021-08-20 15:00:10.958 openLuup.io.server:: MQTT:1888 connection from 127.0.0.1 tcp{client}: 0x55b60154ed58 2021-08-20 15:00:10.959 openLuup.io.server:: MQTT:1888 connection from 127.0.0.1 tcp{client}: 0x55b601a259e8 2021-08-20 15:00:10.959 openLuup.io.server:: MQTT:1888 connection from 127.0.0.1 tcp{client}: 0x55b600f617c8 2021-08-20 15:00:10.959 openLuup.io.server:: MQTT:1888 connection from 127.0.0.1 tcp{client}: 0x55b6015884c8 2021-08-20 15:00:10.959 openLuup.io.server:: MQTT:1888 connection from 127.0.0.1 tcp{client}: 0x55b601c85fe8 2021-08-20 15:00:10.959 openLuup.io.server:: MQTT:1888 connection from 127.0.0.1 tcp{client}: 0x55b602275ae8 2021-08-20 15:00:10.959 openLuup.io.server:: MQTT:1888 connection from 127.0.0.1 tcp{client}: 0x55b60190ab88 2021-08-20 15:00:10.959 openLuup.io.server:: MQTT:1888 connection from 127.0.0.1 tcp{client}: 0x55b601692038 2021-08-20 15:00:10.959 openLuup.io.server:: MQTT:1888 connection from 127.0.0.1 tcp{client}: 0x55b601fcea78 2021-08-20 15:00:10.960 openLuup.io.server:: MQTT:1888 connection from 127.0.0.1 tcp{client}: 0x55b601ca7f28 2021-08-20 15:00:10.960 openLuup.io.server:: MQTT:1888 connection from 127.0.0.1 tcp{client}: 0x55b601fd37f8 2021-08-20 15:00:10.960 openLuup.io.server:: MQTT:1888 connection from 127.0.0.1 tcp{client}: 0x55b6020ec968 2021-08-20 15:00:10.961 openLuup.server:: GET /data_request?id=variableget&DeviceNum=0&serviceId=urn:micasaverde-com:serviceId:HomeAutomationGateway1&Variable=Mode&_=1629292536033 HTTP/1.1 tcp{client}: 0x55b601ab8228 2021-08-20 15:00:10.967 luup_log:0: 32Mb, 3.3%cpu, 11.0days 2021-08-20 15:00:10.972 openLuup.server:: request completed (3361 bytes, 1 chunks, 17459 ms) tcp{client}: 0x55b601a37db8 2021-08-20 15:00:10.973 openLuup.server:: request completed (3361 bytes, 1 chunks, 17449 ms) tcp{client}: 0x55b600bc7068 2021-08-20 15:00:10.990 luup.variable_set:: 10116.urn:upnp-org:serviceId:TemperatureSensor1.CurrentTemperature was: 21.8 now: 21.9 #hooks:0 2021-08-20 15:00:10.990 luup.variable_set:: 10129.urn:micasaverde-com:serviceId:HumiditySensor1.CurrentLevel was: 58.8 now: 58.7 #hooks:0 2021-08-20 15:00:10.991 openLuup.io.server:: MQTT:1888 connection closed tcp{client}: 0x55b600ba45a8 2021-08-20 15:00:10.991 openLuup.mqtt:: closed tcp{client}: 0x55b600ba45a8 2021-08-20 15:00:10.992 openLuup.mqtt:: mqttthing_Klimat kllaren_838dee2e UNSUBSCRIBE from tele/Källartemp/SENSOR tcp{client}: 0x55b600ba45a8 2021-08-20 15:00:10.992 openLuup.mqtt:: ERROR publishing application message for mqtt:tele/Källartemp/SENSOR : closed 2021-08-20 15:00:10.992 openLuup.io.server:: HTTP:3480 connection from 127.0.0.1 tcp{client}: 0x55b601c8c288 2021-08-20 15:00:10.992 openLuup.io.server:: HTTP:3480 connection closed openLuup.server.receive closed tcp{client}: 0x55b600bc7068 2021-08-20 15:00:10.992 openLuup.server:: GET /data_request?id=sdata HTTP/1.1 tcp{client}: 0x55b601547598 2021-08-20 15:00:10.993 openLuup.io.server:: MQTT:1888 connection closed tcp{client}: 0x55b600a62818 2021-08-20 15:00:10.993 openLuup.mqtt:: RECEIVE ERROR: closed tcp{client}: 0x55b600a62818 2021-08-20 15:00:10.994 openLuup.mqtt:: mqttthing_Uttag garaget_6f4265a1 UNSUBSCRIBE from openLuup/update/10149/SwitchPower1/Status tcp{client}: 0x55b600a62818 2021-08-20 15:00:10.994 openLuup.io.server:: MQTT:1888 connection closed tcp{client}: 0x55b600ba8428 2021-08-20 15:00:10.994 openLuup.mqtt:: RECEIVE ERROR: closed tcp{client}: 0x55b600ba8428 2021-08-20 15:00:10.994 openLuup.mqtt:: mqttthing_Takflkt hallen_6da387bf UNSUBSCRIBE from tele/TakfläktHall/LWT tcp{client}: 0x55b600ba8428 2021-08-20 15:00:10.994 openLuup.mqtt:: mqttthing_Takflkt hallen_6da387bf UNSUBSCRIBE from stat/TakfläktHall/POWER2 tcp{client}: 0x55b600ba8428 2021-08-20 15:00:10.994 openLuup.io.server:: MQTT:1888 connection closed tcp{client}: 0x55b600e59b88 2021-08-20 15:00:10.994 openLuup.mqtt:: RECEIVE ERROR: closed tcp{client}: 0x55b600e59b88 2021-08-20 15:00:10.994 openLuup.mqtt:: mqttthing_Klimat sovrummet_0d664e41 UNSUBSCRIBE from openLuup/update/20010/HumiditySensor1/CurrentLevel tcp{client}: 0x55b600e59b88 2021-08-20 15:00:10.994 openLuup.mqtt:: mqttthing_Klimat sovrummet_0d664e41 UNSUBSCRIBE from openLuup/update/20021/TemperatureSensor1/CurrentTemperature tcp{client}: 0x55b600e59b88 2021-08-20 15:00:10.994 openLuup.io.server:: MQTT:1888 connection closed tcp{client}: 0x55b600bd02d8 2021-08-20 15:00:10.994 openLuup.mqtt:: RECEIVE ERROR: closed tcp{client}: 0x55b600bd02d8 2021-08-20 15:00:10.994 openLuup.mqtt:: mqttthing_Entrdrr_6acda58a UNSUBSCRIBE from openLuup/update/10095/SecuritySensor1/Tripped tcp{client}: 0x55b600bd02d8 2021-08-20 15:00:10.995 openLuup.io.server:: MQTT:1888 connection closed tcp{client}: 0x55b600bb6cf8 2021-08-20 15:00:10.995 openLuup.mqtt:: RECEIVE ERROR: closed tcp{client}: 0x55b600bb6cf8 2021-08-20 15:00:10.995 openLuup.mqtt:: mqttthing_Temperatur poolen_a589d192 UNSUBSCRIBE from tele/Pooltemp/SENSOR tcp{client}: 0x55b600bb6cf8 2021-08-20 15:00:10.995 openLuup.io.server:: MQTT:1888 connection closed tcp{client}: 0x55b6009ff868 2021-08-20 15:00:10.995 openLuup.mqtt:: RECEIVE ERROR: closed tcp{client}: 0x55b6009ff868 2021-08-20 15:00:10.995 openLuup.mqtt:: mqttthing_Rrelsesensor hallen_cf7c8293 UNSUBSCRIBE from openLuup/update/20013/SecuritySensor1/Tripped tcp{client}: 0x55b6009ff868 2021-08-20 15:00:10.995 openLuup.io.server:: MQTT:1888 connection closed tcp{client}: 0x55b600a23e28 2021-08-20 15:00:10.995 openLuup.mqtt:: RECEIVE ERROR: closed tcp{client}: 0x55b600a23e28 2021-08-20 15:00:10.995 openLuup.mqtt:: mqttthing_Luftfuktighet badrum_d79a0ffb UNSUBSCRIBE from openLuup/update/10190/HumiditySensor1/CurrentLevel tcp{client}: 0x55b600a23e28 2021-08-20 15:00:10.995 openLuup.io.server:: MQTT:1888 connection closed tcp{client}: 0x55b600bb33b8 2021-08-20 15:00:10.995 openLuup.mqtt:: RECEIVE ERROR: closed tcp{client}: 0x55b600bb33b8 2021-08-20 15:00:10.995 openLuup.mqtt:: mqttthing_Ljussensor hallen_19569c17 UNSUBSCRIBE from openLuup/update/20006/LightSensor1/CurrentLevel tcp{client}: 0x55b600bb33b8 2021-08-20 15:00:10.995 openLuup.io.server:: MQTT:1888 connection closed tcp{client}: 0x55b600a136b8 2021-08-20 15:00:10.995 openLuup.mqtt:: RECEIVE ERROR: closed tcp{client}: 0x55b600a136b8 2021-08-20 15:00:10.995 openLuup.mqtt:: mqttthing_Ljussensor trningsrum_ebf319c5 UNSUBSCRIBE from openLuup/update/20004/LightSensor1/CurrentLevel tcp{client}: 0x55b600a136b8 2021-08-20 15:00:10.995 openLuup.io.server:: MQTT:1888 connection closed tcp{client}: 0x55b600babaa8 2021-08-20 15:00:10.995 openLuup.mqtt:: RECEIVE ERROR: closed tcp{client}: 0x55b600babaa8 2021-08-20 15:00:10.995 openLuup.mqtt:: mqttthing_Solceller watt_e351a23b UNSUBSCRIBE from openLuup/update/10163/LightSensor1/CurrentLevel tcp{client}: 0x55b600babaa8 2021-08-20 15:00:10.995 openLuup.io.server:: MQTT:1888 connection closed tcp{client}: 0x55b6004a9de8 2021-08-20 15:00:10.995 openLuup.mqtt:: RECEIVE ERROR: closed tcp{client}: 0x55b6004a9de8 2021-08-20 15:00:10.995 openLuup.mqtt:: mqttthing_Luftfuktighet dusch_91df9a58 UNSUBSCRIBE from openLuup/update/20008/HumiditySensor1/CurrentLevel tcp{client}: 0x55b6004a9de8 2021-08-20 15:00:10.995 openLuup.io.server:: MQTT:1888 connection closed tcp{client}: 0x55b600b84628 2021-08-20 15:00:10.995 openLuup.mqtt:: RECEIVE ERROR: closed tcp{client}: 0x55b600b84628 2021-08-20 15:00:10.996 openLuup.mqtt:: mqttthing_Altandrr kk_db6d3edd UNSUBSCRIBE from openLuup/update/10097/SecuritySensor1/Tripped tcp{client}: 0x55b600b84628 2021-08-20 15:00:10.996 openLuup.io.server:: MQTT:1888 connection closed tcp{client}: 0x55b600be6548 2021-08-20 15:00:10.996 openLuup.mqtt:: RECEIVE ERROR: closed tcp{client}: 0x55b600be6548 2021-08-20 15:00:10.996 openLuup.mqtt:: mqttthing_Test datarum_adbe85e6 UNSUBSCRIBE from openLuup/update/20007/Dimming1/LoadLevelTarget tcp{client}: 0x55b600be6548 2021-08-20 15:00:10.996 openLuup.mqtt:: mqttthing_Test datarum_adbe85e6 UNSUBSCRIBE from openLuup/update/20007/SwitchPower1/Status tcp{client}: 0x55b600be6548

And then in syslog:

Aug 20 15:00:11 username systemd[1]: openluup.service: Control process exited, code=exited status=7 Aug 20 15:00:11 username systemd[1]: openluup.service: Failed with result 'exit-code'.
openLuup Aug 14, 2022, 4:49 PM

OpenLuup installation

Scheduled Pinned Locked Moved openLuup
33 Posts 6 Posters 2.1k Views
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • A Offline
    A Offline
    ArcherS
    wrote on Aug 27, 2022, 11:58 AM last edited by
    #16

    Hi,

    I am trying to install openLuup on a new Debian 11 server. It is a clean install Debian 11 running as a VM on Proxmox.

    I have installed lua 5.1, lua-socket, lua-filesystem and lua-sec.

    When installing openLuup with "# lua5.1 openLuup_install.lua" I get the following response:

    debian-pve:~/cmh-ludl$ lua5.1 openLuup_install.lua
openLuup_install   2019.02.15   @akbooer
getting openLuup version tar file from GitHub branch master...
un-zipping download files...
getting dkjson.lua...
creating required files and folders
initialising...
downloading and installing AltUI...
sh: 1: curl: not found
lua5.1: ./openLuup/L_AltAppStore.lua:567: attempt to call upvalue 'next_file' (a nil value)
stack traceback:
	./openLuup/L_AltAppStore.lua:567: in function 'update_plugin_job'
	openLuup/init.lua:254: in main chunk
	[C]: ?
openLuup downloaded, installed, and running...
visit http://192.168.1.210:3480 to start using the system
olsson@debian-pve:~/cmh-ludl$ Sat Aug 27 13:35:31 2022	device 2 '    openLuup' requesting reload

    When I try to go to the url "http://192.168.1.210:3480" I get the following response:

    No handler for data_request?id=lr_ALTUI_Handler

    In other words it seems as if there is a problem starting AltUI.

    If I instead go to the Console (http://192.168.1.210:3480/console) openLuup is up and running.

    The startup_log in the Console reads:

    2022-08-27 13:35:31.488   :: openLuup STARTUP :: /home/olsson/cmh-ludl
2022-08-27 13:35:31.488   openLuup.init::        version 2021.06.14  @akbooer
2022-08-27 13:35:31.489   openLuup.scheduler::   version 2021.03.19  @akbooer
2022-08-27 13:35:31.510   openLuup.io::          version 2021.03.27  @akbooer
2022-08-27 13:35:31.510   openLuup.mqtt::        version 2021.06.08  @akbooer
2022-08-27 13:35:31.511   openLuup.wsapi::       version 2019.08.12  @akbooer
2022-08-27 13:35:31.511   openLuup.servlet::     version 2021.04.30  @akbooer
2022-08-27 13:35:31.511   openLuup.client::      version 2019.10.14  @akbooer
2022-08-27 13:35:31.512   openLuup.server::      version 2020.03.26  @akbooer
2022-08-27 13:35:31.518   openLuup.scenes::      version 2021.06.02  @akbooer
2022-08-27 13:35:31.520   openLuup.chdev::       version 2021.05.04  @akbooer
2022-08-27 13:35:31.521   openLuup.userdata::    version 2021.04.30  @akbooer
2022-08-27 13:35:31.521   openLuup.requests::    version 2021.02.20  @akbooer
2022-08-27 13:35:31.521   openLuup.gateway::     version 2021.05.08  @akbooer
2022-08-27 13:35:31.522   openLuup.smtp::        version 2018.04.12  @akbooer
2022-08-27 13:35:31.523   openLuup.historian::   version 2021.06.12  @akbooer
2022-08-27 13:35:31.523   openLuup.luup::        version 2021.05.14  @akbooer
2022-08-27 13:35:31.524   openLuup.pop3::        version 2018.04.23  @akbooer
2022-08-27 13:35:31.524   openLuup.compression:: version 2016.06.30  @akbooer
2022-08-27 13:35:31.524   openLuup.timers::      version 2021.05.23  @akbooer
2022-08-27 13:35:31.524   openLuup.logs::        version 2018.03.25  @akbooer
2022-08-27 13:35:31.524   openLuup.json::        version 2021.05.01  @akbooer
2022-08-27 13:35:31.524   luup.create_device:: [1] D_ZWaveNetwork.xml /  /    ()

2022-08-27 13:35:31.525   openLuup.chdev:: ERROR: unable to read XML file I_ZWave.xml

2022-08-27 13:35:31.530   luup.create_device:: [2] D_openLuup.xml / I_openLuup.xml / D_openLuup.json   (openLuup)
2022-08-27 13:35:31.530   openLuup.init:: loading configuration user_data.json
2022-08-27 13:35:31.530   openLuup.userdata:: loading user_data json...
2022-08-27 13:35:31.532   luup.variable_set:: 2.openLuup.HouseMode was: EMPTY now: 1 #hooks:0
2022-08-27 13:35:31.532   openLuup.userdata:: loading rooms...
2022-08-27 13:35:31.532   openLuup.userdata:: ...room loading completed
2022-08-27 13:35:31.532   openLuup.userdata:: loading devices...
2022-08-27 13:35:31.532   luup.create_device:: [1] D_ZWaveNetwork.xml /  /    ()

2022-08-27 13:35:31.532   openLuup.chdev:: ERROR: unable to read XML file I_ZWave.xml

2022-08-27 13:35:31.534   luup.create_device:: [3] D_AltAppStore.xml / I_AltAppStore.xml / D_AltAppStore.json   (urn:schemas-upnp-org:device:AltAppStore:1)
2022-08-27 13:35:31.534   openLuup.userdata:: loading scenes...
2022-08-27 13:35:31.534   openLuup.userdata:: number of scenes = 0
2022-08-27 13:35:31.534   openLuup.userdata:: ...scene loading completed
2022-08-27 13:35:31.534   openLuup.userdata:: loading installed plugin info...
2022-08-27 13:35:31.534   openLuup.userdata:: [openLuup] openLuup (21.7.25)
2022-08-27 13:35:31.534   openLuup.userdata:: [AltAppStore] Alternate App Store (20.3.30)
2022-08-27 13:35:31.534   openLuup.userdata:: [VeraBridge] VeraBridge (not.installed)
2022-08-27 13:35:31.534   openLuup.userdata:: [8246] Alternate UI (not.installed)
2022-08-27 13:35:31.534   openLuup.userdata:: [Z-Way] Z-Way (not.installed)
2022-08-27 13:35:31.534   openLuup.userdata:: [Arduino] MySensors (not.installed)
2022-08-27 13:35:31.534   openLuup.userdata:: ...user_data loading completed
2022-08-27 13:35:31.534   openLuup.init:: running _openLuup_STARTUP_
2022-08-27 13:35:31.534   luup_log:0: startup code completed
2022-08-27 13:35:31.534   openLuup.init:: init phase completed
2022-08-27 13:35:31.534   :: openLuup LOG ROTATION :: (runtime 0.0 days)

    Any ideas on what could be wrong and why AltUI does not work?

    1 Reply Last reply
    0
    • C Offline
      C Offline
      CatmanV2
      wrote on Aug 27, 2022, 12:38 PM last edited by
      #17

      Looks like it couldn't download the AltUI package because
      curl is missing. It was deprecated in some version of Debian I forget (10?)

      This should help

      Heyan Maurya  /  Aug 18, 2021

      Install and Use Curl on Debian 11 Bullseye Linux

      Install and Use Curl on Debian 11 Bullseye Linux

      Learn the command to install cURL on Debian 11 Bullseye or 10 Buster using terminal. Along with the way to use the cURL and its options

      C

      The Ex-Vera abuser know as CatmanV2.....

      1 Reply Last reply
      2
      • A Offline
        A Offline
        akbooer
        wrote on Aug 27, 2022, 12:42 PM last edited by
        #18

        Yes, I was just looking for the previous posting of this issue. Thanks.

        https://smarthome.community/topic/93/openluup-installation/8?

        1 Reply Last reply
        1
        • A akbooer referenced this topic on Aug 27, 2022, 12:42 PM
        • C Offline
          C Offline
          CatmanV2
          wrote on Aug 27, 2022, 12:44 PM last edited by
          #19

          Yeah, Debian is a bit of a fight to get working these days with Lua and curl missing. Curl is becoming increasingly uncommon and I wonder when we will see openLuup move away (or is it just the app store?)

          Or am I utterly mistaken

          C

          The Ex-Vera abuser know as CatmanV2.....

          1 Reply Last reply
          0
          • A Offline
            A Offline
            akbooer
            wrote on Aug 27, 2022, 12:50 PM last edited by
            #20

            There used to be no dependency in openLuup on curl, but updates from GitHub became too hard to support from within openLuup itself, so I switched to using that. Perhaps another way is possible. My openLuup installations these days all run under Docker using Alpine, which seems to work fine. (I have even done the same under Windows, abandoning the native version where compatibility was becoming difficult too.)

            Time, perhaps, to discuss openLuup’s future development needs more widely? Perhaps a new thread…

            1 Reply Last reply
            2
            • C Offline
              C Offline
              CatmanV2
              wrote on Aug 27, 2022, 12:51 PM last edited by
              #21

              Certainly wasn't having a pop (I forgot who created openLuup) 🙂

              I'm hoping to get some some time to go docker myself. Currently running scared of hardware failure.....

              C

              The Ex-Vera abuser know as CatmanV2.....

              A 1 Reply Last reply Aug 27, 2022, 2:14 PM
              0
              • A Offline
                A Offline
                ArcherS
                wrote on Aug 27, 2022, 1:52 PM last edited by
                #22

                That did the trick! 🙂

                Alpine and Docker, need to look at that also later on. 🙂

                Thank's @CatmanV2 and @akbooer for your swift help!

                1 Reply Last reply
                2
                • C Offline
                  C Offline
                  CatmanV2
                  wrote on Aug 27, 2022, 1:52 PM last edited by
                  #23

                  Glad to be of service!

                  C

                  The Ex-Vera abuser know as CatmanV2.....

                  1 Reply Last reply
                  1
                  • A Offline
                    A Offline
                    akbooer
                    replied to CatmanV2 on Aug 27, 2022, 2:14 PM last edited by
                    #24

                    @catmanv2 said in OpenLuup installation:

                    I'm hoping to get some some time to go docker myself. Currently running scared of hardware failure.....

                    Yes, I used to run on Beaglebone and RPi hardware, but moved for the same reason. Needed a good Raid disc backup anyway, so went for Synology and run Docker on that. Also supports Grafana for all my metrics plotting needs, and Apple Homebridge which has really become my main interface for openLuup and HA in general, since it supports remote access and voice control.

                    1 Reply Last reply
                    2
                    • A Offline
                      A Offline
                      ArcherS
                      wrote on Aug 27, 2022, 5:04 PM last edited by
                      #25

                      Next question. 🙂

                      When restoring from a backup file from another OpenLuup what is the best approach to get everything up and running on the new openLuup installation with icons, plugins etc?

                      Should I manually copy e.g. icons and something else before restoring. Also do I have to install the plugins again?

                      //ArcherS

                      1 Reply Last reply
                      0
                      • A Offline
                        A Offline
                        akbooer
                        wrote on Aug 27, 2022, 5:52 PM last edited by
                        #26

                        If you manually copy the files and icons folder after a fresh install, and then start the openLuup_reload script with the backup file as a parameter, then it should all come up running.

                        1 Reply Last reply
                        1
                        • A Offline
                          A Offline
                          ArcherS
                          wrote on Aug 27, 2022, 7:17 PM last edited by ArcherS Aug 27, 2022, 4:05 PM
                          #27

                          @akbooer that seems to have worked quite nicely when checking quickly on all the devices, thank once more for the quick response. 🙂

                          One thing that does not work is the connection to the Z-Way server. The devices do not update when changing them either in the new openLuup or in the Zway UI.
                          I suspect I need to login again to connect the bridge with the server.
                          If I remember it correctly I should do that in the Console under "actions" for the Z-Way bridge. However it is empty there:

                          8253efd8-3e8f-4461-9a26-1ff3bd1be79f-image.png

                          Any ideas on that one?

                          Edit: I have version 21.1.19 of the Z-Way bridge. On my old installation the login fields are there under "actions".
                          fd1c629f-ffc9-4517-9324-43b6160d03a8-image.png

                          Edit 2: I updated the Z-way plugin. This gave me a second plugin, also the username/passwd dialogues reappeared on the old bridge.
                          After having deleted the new bridge, logged in into the old one and restarted openLuup it seems to work. I will see if anything looks strange.

                          1 Reply Last reply
                          0
                          • C Offline
                            C Offline
                            CatmanV2
                            wrote on Aug 27, 2022, 7:55 PM last edited by
                            #28

                            I really need to understand how I should back up my openLuup, Alt UI, Z-wave server and Reactor sets.... Perhaps an idiot's guide?

                            C

                            The Ex-Vera abuser know as CatmanV2.....

                            A 1 Reply Last reply Aug 27, 2022, 8:22 PM
                            0
                            • A Offline
                              A Offline
                              ArcherS
                              replied to CatmanV2 on Aug 27, 2022, 8:22 PM last edited by
                              #29

                              @catmanv2 yes it can quickly become tricky to have back-ups of everything. I have no clear strategy but some bits-and-pieces that I use.

                              For the Zway server that is running on a separate Pi I make a complete image with Win32 Disk Imager when I update the server. I run it on a 2.5" ssd, so I have two. That way I can revert back if it crashes hopefully.

                              For openLuup I do manual backups (Table Controllers->Backup Controller) before changing things. I keep them on another PC for safe keeping. A fresh install and copying the files and icon folders before running the reload script seems to work ok.

                              Now that I look at migrating to Proxmox I will test another strategy. In Proxmox it is super easy to make a complete copy of the VM. This can then be deployed in a few minutes, no need to set everything up from scratch again. My idea is to use this as a fall back also in combination with openLuup backups. Also to use it when testing things on a temporary VM before updating the live VM.

                              I have not moved over to MSR yet so thte Reactor logic is part of the openLuup backups.

                              The plan is also to run my Home Assistant on the Proxmox server to be able to have a live server and a test server in parallel.

                              1 Reply Last reply
                              1
                              • C Offline
                                C Offline
                                CatmanV2
                                wrote on Aug 27, 2022, 8:25 PM last edited by
                                #30

                                Thanks. II have everything running on a single Intel NUC but......

                                FWIW MSR rocks. I'm moving my reactors over and it's a pleasure

                                C

                                The Ex-Vera abuser know as CatmanV2.....

                                A 1 Reply Last reply Aug 27, 2022, 8:33 PM
                                0
                                • A Offline
                                  A Offline
                                  ArcherS
                                  replied to CatmanV2 on Aug 27, 2022, 8:33 PM last edited by
                                  #31

                                  @catmanv2 MSR is definitely on the list of things to setup and try. It seems really nice and a natural step forward from Reactor. 🙂

                                  1 Reply Last reply
                                  1
                                  • A Offline
                                    A Offline
                                    ArcherS
                                    wrote on Sep 2, 2022, 5:57 PM last edited by
                                    #32

                                    So I thought I would report back on the restore of openLuup onto my new server.

                                    What I did was roughly:

                                    • set up a fresh install of openLuup on my new server
                                    • stop the old and new server with
                                      http://192.168.1.xxx:3480/data_request?id=exit
                                    • copy all the content from the folders "files" and "icons" from the old server to the new server (this I had to do with sudo rights in the Terminal)
                                    • copy the latest backup file to the backup foder on the new server
                                    • run the reload openLuup script from the cmh-ludl folder
                                      ./openLuup_reload backup/backup.openLuup-nnnn.lzap
                                    • restart the server

                                    After this the new server contained all the items from the old installation. Most things has worked, but some things did not.

                                    I had to reinstall the Z-way plugin (plugins->update now button) to get it working, the login fields did not exist (see above) until I did that. After the reinstall I could log in and get it to work.
                                    I also had to reinstall Reactor and the Telegram plugins (plugins->update now button).
                                    Reactor said the database was old and the update button was not there so it could not be updated.
                                    Telegram did not work but everything looked as it should. After the update it worked.
                                    The only remaining oddity from this error is that I now have a Reactor sensor that I cannot remove. It crashed during editing it before I realised that the plugin did not fully work (it is now empty when I open it, so no delete button).
                                    I recreated the logic in a new sensor and disabled the old one.
                                    Any advice on how I can remove the failed sensor would be appreciated. 🙂

                                    Yesterday I discovered that my Remotec ZRC90 remotes did not work. The sl_CentralScene did not update when pressing the buttons on the remote. Based on the advice in this thread I reinstalled the development version of the Z-way plugin from the App Store and then it worked. Strange problem, unclear what could be the reason for it.

                                    So a few quirks here and there, it seems as if some data does not survive the restore, unclear why.

                                    @akbooer is it better to do a reinstall from App Store when restoring a backup of from of from Plugins->update now button? Or should it not matter? 🙂

                                    As a small side note I also reinstaller Grafana onto the new server. I found a useful tip that it is possible to copy the grafana.db file from the old server to move all of the configuration. This worked perfectly at least on my 8.1.1 installation. The only issue is to make sure to have the same version Grafana on the new server as on the old. This is is easy to do with the help of their webpage.

                                    A 1 Reply Last reply Sep 3, 2022, 10:33 AM
                                    1
                                    • A Offline
                                      A Offline
                                      akbooer
                                      replied to ArcherS on Sep 3, 2022, 10:33 AM last edited by akbooer Sep 3, 2022, 6:36 AM
                                      #33

                                      @archers said in OpenLuup installation:

                                      I had to reinstall the Z-way plugin (plugins->update now button) to get it working, the login fields did not exist (see above) until I did that. After the reinstall I could log in and get it to work.

                                      Thanks for the feedback!

                                      Yes, some plugins do make first-time initialisations like this.

                                      @archers said in OpenLuup installation:

                                      run the reload openLuup script from the cmh-ludl folder
                                      ./openLuup_reload backup/backup.openLuup-nnnn.lzap

                                      Really glad to hear this worked smoothly. It's something I very rarely do, but it was certainly well tested when first implemented.

                                      Sorry that I can't advise on the Reactor issue.

                                      @archers said in OpenLuup installation:

                                      is it better to do a reinstall from App Store when restoring a backup of from of from Plugins->update now button? Or should it not matter?

                                      For an already installed plugin, they're equivalent (unless you specify to install anything other than the master version.) For a new plugin, you obviously have to use the App Store. It is possible to maliciously damage the install configuration data which is used for existing plugins, but you'd have to try very hard. In that case, recourse to the store is necessary. The only thing I'm aware of is that there is no install button for VeraBridge, and it's not in the App Store, but since Vera is EOL this hardly matters.

                                      1 Reply Last reply
                                      1

                                      25/33

                                      Aug 27, 2022, 5:04 PM

                                      Recent Topics

                                      • MQTT configuration question
                                        tunnusT
                                        tunnus
                                        about 23 hours ago
                                        0
                                        11
                                        214
                                      • System Configuration Check - time is offset
                                        G
                                        gwp1
                                        a day ago
                                        0
                                        8
                                        63
                                      • Programmatically capture HTTP Request action status code or error
                                        therealdbT
                                        therealdb
                                        4 days ago
                                        0
                                        3
                                        54
                                      • ZwaveJSUI - RGBWW BULB - Warm/Cold White interfered with RGB settings - Bulb doesn't change color if in WarmWhite state.
                                        toggledbitsT
                                        toggledbits
                                        5 days ago
                                        0
                                        9
                                        269
                                      • Problem with simultaneous notifications.
                                        T
                                        tamorgen
                                        5 days ago
                                        0
                                        1
                                        39
                                      • Problem after upgrading to 25067
                                        R
                                        retireditguy
                                        10 days ago
                                        0
                                        4
                                        160
                                      • Reactor (Multi-System/Multi-Hub) Announcements
                                        toggledbitsT
                                        toggledbits
                                        12 days ago
                                        5
                                        119
                                        16.9k
                                      • Global expressions not always evaluated
                                        tunnusT
                                        tunnus
                                        12 days ago
                                        0
                                        3
                                        119
                                      • [Solved] Local expression evaluation
                                        tunnusT
                                        tunnus
                                        23 days ago
                                        0
                                        13
                                        370
                                      • [Solved] Runtime error when exiting global reaction that contains a group
                                        G
                                        gwp1
                                        25 days ago
                                        0
                                        7
                                        546
                                      • Cannot delete Global Expressions
                                        SnowmanS
                                        Snowman
                                        26 days ago
                                        0
                                        3
                                        188
                                      • Advice on Storing and Backing Up Bind Mounts - Docker
                                        therealdbT
                                        therealdb
                                        Mar 4, 2025, 8:27 AM
                                        1
                                        5
                                        392
                                      Powered by NodeBB | Contributors
                                      Hosted freely by 10RUPTiV - Solutions Technologiques | Contact us
                                      • Login
                                      • Don't have an account? Register
                                      • Login or register to search.
                                      25 out of 33
                                      • First post
                                        25/33
                                        Last post
                                      0
                                      • Categories
                                      • Recent
                                      • Tags
                                      • Popular
                                      • Unsolved