Skip to content
  • Categories
  • Recent
  • Tags
  • Popular
  • Unsolved
Collapse
Discussion Forum to share and further the development of home control and automation, independent of platforms.
  1. Home
  2. Software
  3. Multi-System Reactor
  4. Almost there!
DynamicGroupController and attributes
therealdbT
Hey @toggledbits I'm back to trying to optimize a couple of things based on dynamic group. First of all, I think I found a typo in the doc: primary_attribute: "binary_sensor.state" primary_attribute_value: | d = false; each id in members: d = getEntity(id)?.attributes?.power_switch?.state or d, d I think the correct code snippet is d = false, All that said, my use case for dynamic groups is to group 3 different climate devices, so I could easily command them at the same time. Commands are good, but sometimes I want to check if any of the devices are on, and that's easily done with a similar snippet as the one you have in the docs. But this is limited to the primary attribute, while I want to have any of the attributes in the group to be driven by a similar logic (while all are null in the group). ie, access hvac_control.mode and see if any of the unit is set to cool, or heat. Is that possible, without re-defining an expression in each of my rules? Thanks!
Multi-System Reactor
Reactor (Multi-System/Multi-Hub) Announcements
toggledbitsT
Build 21228 has been released. Docker images available from DockerHub as usual, and bare-metal packages here. Home Assistant up to version 2021.8.6 supported; the online version of the manual will now state the current supported versions; Fix an error in OWMWeatherController that could cause it to stop updating; Unify the approach to entity filtering on all hub interface classes (controllers); this works for device entities only; it may be extended to other entities later; Improve error detail in messages for EzloController during auth phase; Add isRuleSet() and isRuleEnabled() functions to expressions extensions; Implement set action for lock and passage capabilities (makes them more easily scriptable in some cases); Fix a place in the UI where 24-hour time was not being displayed.
Multi-System Reactor
Rule condition shows TRUE in UI but Rule never transitions to SET — survives full restart
N
Build: latest-26221-b25bb3e3, Docker on Synology. Hi, I have a Rule whose Trigger/Constraints reference other Rules via Rule State ... is TRUE. At some point it stops firing. Expanding the rule's condition tree in the UI shows every Trigger and Constraint condition green/TRUE — confirmed live by walking into the room and watching Motion go true in real time. Rule History shows no new SET, just old reset entries. Tried, on the same rule, same evening: recreating the trigger conditions with fresh IDs, recreating the constraint conditions with fresh IDs (flat and wrapped in a new Group — wrapping in a Group produced one SET, but it didn't reproduce on repeat attempts with the same structure), and finally a full container restart with a verified-correct saved rule. Still no SET, even with a fresh live motion event right after the restart. Separately, I found that this rule (and its 10 per-room clones) share identical internal condition/group IDs with each other — leftover from a batch clone done months ago, never regenerated. Not sure if that's related, since fixing the IDs didn't reliably fix the symptom either. Has anyone seen a Rule State condition show TRUE in the UI without the Rule ever producing a SET, surviving a clean restart? Thanks in advance
Multi-System Reactor
Unofficial thread for compatibility
tunnusT
As there are statements about compatibility for home assistant versions in MSR new version announcements (e.g. "HassController: Bless Hass to 2025.7.3"), I thought it would be good idea to track other controllers as well. As an example, I can confirm that build "latest-25208-c53e8513" works with Hubitat Elevation C-8 platform version 2.4.2.134 using Maker API. Updates: (the latest versions first in the list) OK: build "latest-25264-2fbe9217" with Hubitat C-8 platform v. 2.4.3.123
Multi-System Reactor
Ooops - Deleted Reactor Ex Machina II
R
I accidentally deleted Reactor Ex Machina II (REM II) from my Reactor rules. I tried to recover it by deleting the .json and .dval in the Rules subdirectory and then recreating it from Togglebits original posting, but that did not work. Does anyone know how to recover REM ll ?
Multi-System Reactor
Bail out of failed reaction?
T
Topic thumbnail image
Multi-System Reactor
Arming Envisalink panel from MSR
T
Topic thumbnail image
Multi-System Reactor
[Solved] DynamicGroupController updating members issue
CrilleC
Edit: Solved in latest-26221. Bare-metal latest-26193 I have this group: "OKforLarm": name: OK för Larm select: - include_controller: vera - include_capability: door_sensor filter_expression: entity.attributes.door_sensor.state It contains the entities I expect but behaves a bit odd. When I open vera>device_10097 the entity attribute door_sensor.state changes to true but it won't show up as member in the group, when I also open vera>device_10095 they both shows as members and when I close vera>device_10095 it disappear from the group but when I close vera>device_10097 it lingers in the group until I restart Reactor.
Multi-System Reactor
Upgrade Issues
T
Topic thumbnail image
Multi-System Reactor
[SOLVED] Conflicting Set Reaction Groups Appear to Fire Simultaneously in Single Rule Evaluation
G
Topic thumbnail image
Multi-System Reactor
[SOLVED] Question regarding "in" vs "contains" vs contents of the string
G
Topic thumbnail image
Multi-System Reactor
Logon screen timeout
G
Noticing since 170 that the lock screen doesn't switch to the logon prompt but, rather, stays on the active UI until such time as you go to click something within it. Then it jumps to the login screen. Brave browser Brave 1.92.139 (Official Build) (arm64) Chromium: 150.0.7871.114
Multi-System Reactor
[MSR] Copy&past of actions and/or drag&drop between set/reset
therealdbT
Hey @toggledbits One thing that bothers me while doing work on new systems/new features, is that I cannot copy&paste actions, and I cannot drag&drop between set and resets. #1 is for when I want to copy an action between different rules opened in two separate browser windows, while #2 is when I just need to flip a bunch of actions in the reset, or move some logic back and forth. Both will be appreciated, but I understand the technical challenges. Thanks!
Multi-System Reactor
Upgrade advice - upgrade from aarch64 to ARM64 image
T
I'm currently on version 26011. I understand that the aarch64 image is no longer supported. So, I therefore need to update to the ARM64 image. Can anyone possibly suggest how I update my docker compose.yaml file (see below). Ideally I'd like to keep my existing reactions etc. rather than start from scratch. # Multi-System Reactor template docker-compose.yml (version 22160) # # Change the lines indicated by "DO"... # services: reactor: container_name: reactor environment: # DO change the TZ: line to set your local time zone. # See valid TZ list: https://en.wikipedia.org/wiki/List_of_tz_database_time_zones TZ: GB # # DO NOT change this path. Your directory location is in "source" below. REACTOR_DATA_PREFIX: /var/reactor # DO change the image below to the one you are using (e.g. armv7l or aarch64 for RPi 4) image: toggledbits/reactor:latest-aarch64 restart: "always" expose: - 8111 ports: - 8111:8111 volumes: # DO change the /home/username/reactor below to the directory you created for # your local data; DO NOT change the /var/reactor part - /home/pi/docker/reactor:/var/reactor - /etc/localtime:/etc/localtime:ro tmpfs: /tmp
Multi-System Reactor
Alexa for MSR, any interest?
MikeReadingtonM
Topic thumbnail image
Multi-System Reactor
[RESOLVED] Telegram notification broke with latest update
3
Topic thumbnail image
Multi-System Reactor
[RESOLVED] Phantom device, “INFO” appears
wmarcolinW
Topic thumbnail image
Multi-System Reactor
[RESOLVED] Mode Status NULL
wmarcolinW
Topic thumbnail image
Multi-System Reactor
[RESOLVED] HTTP query failing after version 26177
wmarcolinW
Topic thumbnail image
Multi-System Reactor
Question about the find function
wmarcolinW
Topic thumbnail image
Multi-System Reactor

Almost there!

Scheduled Pinned Locked Moved Multi-System Reactor
13 Posts 10 Posters 2.8k Views 9 Watching
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • rafale77R Offline
    rafale77R Offline
    rafale77
    wrote on last edited by
    #2

    Very impressive and looking forward to it. I will do what I can with the limited time I have working on this these days... As I seem to be getting near unlimited work hours. I am thinking about creating a dedicated ubuntu20 VM for this.

    toggledbitsT 1 Reply Last reply
    0
    • rafale77R rafale77

      Very impressive and looking forward to it. I will do what I can with the limited time I have working on this these days... As I seem to be getting near unlimited work hours. I am thinking about creating a dedicated ubuntu20 VM for this.

      toggledbitsT Offline
      toggledbitsT Offline
      toggledbits
      wrote on last edited by
      #3

      @rafale77 said in Almost there!:

      I am thinking about creating a dedicated ubuntu20 VM for this.

      That's a big bat to hit it with, but perfectly workable. If it helps, I do all my development in a 2GB single core VM. I'm stubborn with things like that. If I can't make it run well on that, I'm doing it wrong. And it runs with a really light touch, so far, even though I have three Veras, Hass and Hubitat all integrated at once. Runs great on a RPi4 as well.

      Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

      1 Reply Last reply
      0
      • K Offline
        K Offline
        kfxo
        wrote on last edited by
        #4

        Spinning up a dedicated VM on my synology right now in anticipation of the first preview. Can't wait!

        1 Reply Last reply
        1
        • MatohlM Offline
          MatohlM Offline
          Matohl
          wrote on last edited by
          #5

          Dusting of my RPi 4 to test it out 🙂

          1 Reply Last reply
          1
          • PerHP Offline
            PerHP Offline
            PerH
            wrote on last edited by
            #6

            Cool! I'm currently on the Docker path, so i'll be setting up one for this. Ubuntu or debian? mabye Alipne, as VWout used for Openluup?

            1 Reply Last reply
            2
            • akbooerA Offline
              akbooerA Offline
              akbooer
              wrote on last edited by
              #7

              I like Alpine. It's tiny. "Less is more."

              1 Reply Last reply
              1
              • cw-kidC Offline
                cw-kidC Offline
                cw-kid
                wrote on last edited by
                #8

                I plan to switch from PLEG to MSR.

                I've never used Reactor before ever.

                Can't be any harder than PLEG right? 😁

                1 Reply Last reply
                0
                • Black CatB Offline
                  Black CatB Offline
                  Black Cat
                  wrote on last edited by
                  #9

                  @cw-kid ^^^ It's actually easier but it isn't the same. I haven't abandoned PLEG entirely as it is rock solid and use Reactor for new automations.
                  MSR is entirely different from what I see as it ties in different systems, for instance I'm looking at tying a Vera Lite, Vera Edge, Homeseer 3 & Homeseer 4 into one system.

                  aka Zedrally

                  1 Reply Last reply
                  0
                  • cw-kidC Offline
                    cw-kidC Offline
                    cw-kid
                    wrote on last edited by
                    #10

                    So MSR is very different to the current Reactor in Vera?

                    I guess as I'll be starting from scratch with MSR it's the right time to start learning it and skip the current Reactor in Vera

                    1 Reply Last reply
                    0
                    • toggledbitsT Offline
                      toggledbitsT Offline
                      toggledbits
                      wrote on last edited by
                      #11

                      MSR will be very familiar to users of Vera Reactor. There are changes, for sure, but conceptually it works very much the same, and many of the displays have a similar look and feel. The systems are close enough that I have been able to craft an importer to read a Vera Reactor backup file and create MSR rules and reactions (they still need review and adjustment, but at least it's not starting from a blank slate). The biggest difference is that Vera Reactor's device model is determined by Vera/Luup, where I had to invent a model for MSR. In doing so, I borrowed concepts from other available controllers and services like MQTT, choosing what I thought were the best ideas and set the stage for the broadest reach platform-wise, and the most extensibility. I would say that if you have something you want to get done today in Vera Reactor, go ahead and do it. It will only smooth the path for you starting with MSR.

                      Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                      1 Reply Last reply
                      5
                      • parkercP Offline
                        parkercP Offline
                        parkerc
                        wrote on last edited by
                        #12

                        Hi @toggledbits - QQ: where do I register to use MantisBT, the link you shared just takes me to a page with a logo and a username box, there are no other menu options on the page I can see? (FYI - I’m accessing it from an iPad)

                        1 Reply Last reply
                        0
                        • LibraSunL Offline
                          LibraSunL Offline
                          LibraSun
                          wrote on last edited by
                          #13

                          When I have an abundance of extra time, and when the MSR Dashboard feature is fully fledged, I plan to make a "Lights Out game" using NxN virtual switches, that operates just like this online version: http://bz.var.ru/comp/web/js/floor.html ✌

                          1 Reply Last reply
                          0
                          • toggledbitsT toggledbits locked this topic on
                          Reply
                          • Reply as topic
                          Log in to reply
                          • Oldest to Newest
                          • Newest to Oldest
                          • Most Votes


                          Recent Topics

                          • DynamicGroupController and attributes
                            toggledbitsT
                            toggledbits
                            1
                            9
                            235

                          • Reactor (Multi-System/Multi-Hub) Announcements
                            toggledbitsT
                            toggledbits
                            5
                            149
                            134.8k

                          • Rule condition shows TRUE in UI but Rule never transitions to SET — survives full restart
                            toggledbitsT
                            toggledbits
                            0
                            4
                            30

                          • Unofficial thread for compatibility
                            tunnusT
                            tunnus
                            2
                            2
                            710

                          • Ooops - Deleted Reactor Ex Machina II
                            toggledbitsT
                            toggledbits
                            0
                            2
                            59

                          • Bail out of failed reaction?
                            T
                            tamorgen
                            0
                            3
                            101

                          • Arming Envisalink panel from MSR
                            T
                            tamorgen
                            0
                            7
                            323

                          • [Solved] DynamicGroupController updating members issue
                            CrilleC
                            Crille
                            0
                            5
                            239

                          • Upgrade Issues
                            T
                            tbully
                            0
                            9
                            347

                          • [SOLVED] Conflicting Set Reaction Groups Appear to Fire Simultaneously in Single Rule Evaluation
                            toggledbitsT
                            toggledbits
                            0
                            10
                            459

                          • [SOLVED] Question regarding "in" vs "contains" vs contents of the string
                            G
                            gwp1
                            0
                            5
                            225

                          • openLuup console disappeared - 500 - Internal Server Error
                            A
                            a-lurker
                            0
                            2
                            245
                          Powered by NodeBB | Contributors
                          Hosted freely by 10RUPTiV - Solutions Technologiques | Contact us
                          • Login

                          • Don't have an account? Register

                          • Login or register to search.
                          • First post
                            Last post
                          0
                          • Categories
                          • Recent
                          • Tags
                          • Popular
                          • Unsolved