Hi,
Running the latest MSR latest-24152-3455578a with the latest HA 2024.6.1. When trying to call a service I get the following in the MSR logs. Is this a version mismatch? I am not seeing anything in the HA logs.
[latest-24152]2024-06-11T10:29:56.162Z <Rule:INFO> rule-Monitor-DHW (rule-lsvq5k3x in Central Heating) started [latest-24152]2024-06-11T10:29:58.625Z <HassController:WARN> HassController#hass unknown service opentherm_gw.set_hot_water_setpoint in x_hass.call_service action on Thermostat#hass>climate_living_room_otgw [latest-24152]2024-06-11T10:29:58.626Z <HassController:INFO> HassController#hass: sending payload for x_hass.call_service on Thermostat#hass>climate_living_room_otgw action: [Object]{ "type": "call_service", "service_data": { "gateway_id": "living_room_otgw", "temperature": 65 }, "domain": "opentherm_gw", "service": "set_hot_water_setpoint", "target": { "entity_id": "climate.living_room_otgw" } } [latest-24152]2024-06-11T10:29:58.627Z <HassController:ERR> HassController#hass request 1718101798626<6/11/2024, 12:29:58 PM> (call_service) failed: [Object]{ "id": 1718101798626, "type": "result", "success": false, "error": { "code": "invalid_format", "message": "extra keys not allowed @ data['entity_id']" } } [latest-24152]2024-06-11T10:29:58.627Z <HassController:WARN> HassController#hass action x_hass.call_service([Object]{ "service": "opentherm_gw.set_hot_water_setpoint", "data": "{ \"gateway_id\": \"living_room_otgw\", \"temperature\": 65 }" }) on Thermostat#hass>climate_living_room_otgw failed!Cheers Rene
Some background
I'm trying to integrate a Zigbee device into the MSR using zigbee2mqtt bridge and MQTTController. The device in question is a cheap mood light that has following properties that I'd like to control:
I'v already managed to get the switch part working and can toggle the light on/off. Also the brightness value is mapped back to MSR. In zigbee2mqtt it has a value range from 0 to 254, so this the reason for the expression:
expr: 'payload.brightness / 254'Here's the entity definition (don't know whether the type should be something else than the Switch)
zigbee-lidl-mood-light: name: 'Lidl Mood Light' friendly_name: 'Mood Light' type: Switch uses_template: lidl-moodlightAnd the corresponding template (NOTE: rgb_color has not been defined in this example):
lidl-moodlight: init: "zigbee2mqtt/%friendly_name%/get/state" query: "zigbee2mqtt/%friendly_name%/get/state" capabilities: - power_switch - toggle - dimming primary_attribute: power_switch.state events: "zigbee2mqtt/%friendly_name%": "power_switch.state": json_payload: true expr: 'upper(payload.state) == "ON"' "dimming.level": json_payload: true expr: 'payload.brightness / 254' actions: power_switch: "on": topic: "zigbee2mqtt/%friendly_name%/set/state" payload: 'ON' "off": topic: "zigbee2mqtt/%friendly_name%/set/state" payload: 'OFF' set: topic: "zigbee2mqtt/%friendly_name%/set/state" payload: expr: "parameters.state ? 'ON' : 'OFF'" type: raw toggle: topic: "zigbee2mqtt/%friendly_name%/set/state" payload: 'TOGGLE'The problem
In order to control the brightness or the RGB color values, I would have send a JSON payload in corresponding actions. But I have no idea how to define it in the template. The reason why the switch part is working is that the zigbee2mqtt accepts also plain ON / OFF / TOGGLE string payloads in that case.
But the brightness should be controlled with the following payload:
{"brightness": 196}And the RGB color like:
{"color":{"rgb":"46,102,150"}}Here's the link for the documentation (the Exposes part defines the messages).
So how should I define the JSON payload for example for the dimming action? It definitely should be some sort of expressions since I have to map the MSR real value (0...1) to (0...254) for the zigbee2mqtt.
actions: dimming: set: topic: "zigbee2mqtt/%friendly_name%/set" payload: expr: ????? type: jsonAnother problem is the RGB value. I could use the rgb_color capability for the setting but the problem is that the zigbee2mqtt only reports the current color in hue/saturation or xy coordinates.
Here's an example of published message after setting the color:
Topic: zigbee2mqtt/Mood Light QoS: 0 { "brightness":254, "color":{ "hue":240, "saturation":100, "x":0.1355, "y":0.0399 }, "color_mode":"xy", "color_temp":574, "linkquality":96, "state":"ON" }I would have to map those values back to RGB, but is it even possible with existing constructs in MQTTController's templates?
Help would be appreciated @toggledbits
br,
mgvra
That's probably more appropriate to post on Mantis for @toggledbits, but since I know there's at least @Crille publishing templates, my intent with this post is to open a broader discussion.
Long story short: I'm starting to slowly add new template for Shelly Plus and I noticed I'll end up with a dozen more templates, all similar but simply different in trivial details, all sharing a large amount of code and all needing special cares when fixing bugs/adding features (as the latest wifi_status addition).
So, I'm wondering if it's time to start thinking of some sort of inheritance in templates, where I could just create a generic shelly_gen1 and use it as a base for shelly_relay, and this be used as the base for shelly_relay_power and so on.
I could probably achieve this with some sort of scripting on my side to generate templates via code, but maybe there's a better way of doing this, or it's already on the radar.
Build 21228 has been released. Docker images available from DockerHub as usual, and bare-metal packages here.
Home Assistant up to version 2021.8.6 supported; the online version of the manual will now state the current supported versions; Fix an error in OWMWeatherController that could cause it to stop updating; Unify the approach to entity filtering on all hub interface classes (controllers); this works for device entities only; it may be extended to other entities later; Improve error detail in messages for EzloController during auth phase; Add isRuleSet() and isRuleEnabled() functions to expressions extensions; Implement set action for lock and passage capabilities (makes them more easily scriptable in some cases); Fix a place in the UI where 24-hour time was not being displayed.I need a handful of victims volunteers to help test previews of the next build of Reactor. A long-standing request was for "a simple login mechanism," but in practice, adding user authentication and competent access control turned out to be a pretty big project with a lot of big changes on both server and client sides. It's a bit more than I'm comfortable testing myself and springing out to everyone at once, so I'd like to work with a small group to put it through "sea trials."
Major changes/features include:
User authentication with hashed password storage; User group configuration with application restriction (admin, dashboard, API); Detailed control over API access, with user- and token-based authentication/authorization; Improvements to the HTTPS service; Improvements to UI coordination with the core for Rules and Reactions.If this sounds like something you'd like to help with, drop me a reply here in this thread or privately.
[Solution: Reactor 24115 is not compatible with MQTTController > 24120]
Reactor latest-24115 bare metal.
All MQTT entities stop working after updating MQTTController to 24142, downgrade to 24120 and they are back. Templates and configured entities has not been changed between versions.
I'm not sure if uses_template should be replaced by ìnclude in entity configuration in reactor.yaml but I guess not, I've tried it and it did not do any difference.
I have not tried to update Reactor to userauth version.
Example entity in reactor.yaml that uses MQTTController included template:
entities: "takflakt_kallare": name: "Takfläkt källare" topic: "Källartemp" unit: "" uses_template: tasmota_generic_relay init: "cmnd/%topic%/POWER%unit%"Any hints? Do you need more info, please let me know.
Log from startup:
I'm slowly migrating all my stuff to MQTT under MSR, so I have a central place to integrate everything (and, in a not-so-distant future, to remove virtual devices from my Vera and leave it running zwave only).
Anyway, here's my reactor-mqtt-contrib package:
![](https://github.com/fluidicon.png)
Contrib MQTT templates for Reactor. Contribute to dbochicchio/reactor-mqtt-contrib development by creating an account on GitHub.
Simply download yaml files (everything or just the ones you need) and you're good to go.
I have mapped my most useful devices, but I'll add others soon. Feel free to ask for specific templates, since I've worked a lot in the last weeks to understand and operate them.
The templates are supporting both init and query, so you have always up-to-date devices at startup, and the ability to poll them. Online status is supported as well, so you can get disconnected devices with a simple expression.
Many-many thanks to @toggledbits for its dedication, support, and patience with me and my requests 🙂
Is the following config correct?
- id: time_series name: "Out temp" capabilities: temperature_sensor: attributes: value: model: time series entity: "hass>sensor_outdoor_temperature" attribute: "temperature_sensor.value" interval: 5 # minutes retention: 20 # minutes aggregate: wma primary_attribute: temperature_sensor.value type: ValueSensorSpecifically, is "depth" directive needed/mandatory here? Reason I'm asking is that I'm not getting a "final" value in MSR, only debug values are shown:
temperature_sensor.units=null temperature_sensor.value=null x_virtualentity.last_request_time=null x_virtualentity.request_failures=null x_virtualentity.template=null x_virtualentity.timeseries_debug=[{"time":1716537360000,"value":22.1},{"time":1716537660000,"value":22},{"time":1716537960000,"value":22},{"time":1716538260000,"value":21.9},{"time":1716538560000,"value":22}]Good morning,
I apologize if this subject has been covered. I did try the search, but I'm not coming up with any topics on my issue.
I'm running userauth-24137-57b41335, bare metal installation on Fedora 39 Server.
I have a rule set up to turn the Eco mode off on my Nest Thermostat when the thermostat is set to Away (Rule State: Away Mode), the user (Driver) presence in my car changes to true, and the destination is set to home.
93804f7c-62d6-42c0-ae04-ff602011a6fd-image.png
This works fine for most days, where I'm headed home from work (commute is about 45 minutes). What I don't want it to do is set change it to Eco mode if my ETA is more than an hour.
There is a sensor/entity for Time to Arrival when the Destination is set. What it appears to provide is the Time OF arrival/ETA, not time until arrival. If it was Time until Arrival, and it was a numeric value, I could simply test if the value is less than 60 and be done with it.
I pulled up the history through Home Assistant for my morning commute and this appears to be what it is providing.
c2a32739-c84f-4a05-95d9-73793ed818f5-image.png
So what I need to do is to do a calculation of the the ETA from the sensor value and subtract the current time, and get a value in minutes that I can determine if it's less than 60.
I believe I can do this with the local expression, but I don't see anything for the system time, or local time. Also, do the local expressions update themselves if the sensors do?
Good morning,
I'm running userauth-24137-57b41335 on Fedora 39, bare metal installation.
ZWaveJSController 0.1.23254
Home Assistant:
Core, 2024.5.3 Supervisor, 2024.05.1 Operating System, 12.3 Frontend, 20240501.1I'm trying to troubleshoot a Dynamic Group Controller and notification alert that I've set up for low battery level.
In my Reactor.config, I have the following lines:
name: "Dynamic Group Controller" implementation: DynamicGroupController config: groups: "zwavejs_dead": select: - include_group: "zwavejs" filter_expression: "entity?.attributes?.zwave_device?.status == 3" group_actions: true "low_battery": select: - include_capability: battery_power filter_expression: > entity.attributes.battery_power.level < 0.35The idea here is that I should only have members of this group that have a battery level below 35%. When I go into Entities, I show a whole slew of devices, none of which have a battery level below the threshold.
a77e445b-ab78-4752-a624-3c4117f34f90-image.png
I also tried setting up a rule to generate a push notification once a day, but with all of the group members, I've had to disable the rule. I believe I have it set up correctly, but I'm not 100% sure. I want the notification to tell me the battery level for that device as well.
289b4f68-03ba-49c0-8275-f0f197d13a3a-image.png
ce24a76e-6865-40bd-bd85-632e54d315a8-image.png dc837424-deb5-4ef7-8f0d-3676f1769535-image.png
Can anyone point to me what I may have misconfigured to get these results?
I should also note I'm only interested in ZWaveJS devices. It's showing me battery status for my iPad and car as well, which I don't need it to send me.
I have a case where I'm trying to send a MQTT message similar to the example below:
Topic: pool/set { "command": 4, "value": 1, "time": 0, "interval": 0 }But I need to set "value" so that it is an integer between 20-30. I thought I could use "dimming" capability here, but there's probably a better way. @therealdb ?
(Using userauth-24120-7745fb8d build in Docker)
There's a filtering capability for entities in reactor.yaml, but I have a case where I don't want to filter an entity altogether, but would like to "throttle" it, as this sensor updates every 1-2 seconds (and therefore unnecessarily takes database space).
Sensor data comes through home assistant, and seems that there's no way to control update interval at that end.
So I'm asking if plugin configuration could support limiting/throttling updates for certain entities?
Good morning,
Hopefully this is a simple request. I believe the title should be self explanatory, but just in case, I'll elaborate.
On the status tab, we all get alerts if a device state has changed (i.e., been removed). This is great, but when I go into the entities tab, I have to either type the name (or a portion thereof) of the device that has been removed, or I need to scroll all the way through my list of devices. This is infrequent, however, yesterday I replaced a failed device in my HAAS environment. It was a Z-Wave switch that is added using the Smart Scan QR code, which normally makes it pretty easy. However, some devices don't get fully added the first time around, so it'll add multiple entries into HAAS until it get's the S2 authentication correct and the device fully included. It did this to me yesterday, and I had to delete the incomplete device from my installation. MSR still saw the entities of that failed/incomplete switch entity, and I was left with 8 alerts and entities that I needed to removed.
It's not a huge problem, but this example was just one switch. If I were to add replace multiple devices at once, this could be a bit more annoying to remove. It would be helpful to be able to filter by removed entities, so I can find them all quickly and delete them. Continuing that train of thought, it would also be useful to have check boxes next to those lines, and perhaps do a select all type of thing so they could be deleted in one mouse click.
@toggledbits I have finally finished up the SSL using Let's Encrypt and am getting this from my local browser:
f3d0ac22-272e-46c1-b7e3-57b08bdd1555-image.png
21c04fe1-1760-4ce6-a4de-2285d3349940-image.png
3a7022db-5add-40a1-b9a2-0c0b97fa211b-image.png
I know you said in the docs that using a self-signed could lead to this but this is LE.
Hi @toggledbits,
I don't know if I'm the only one, so I'm reporting here first instead of opening a bug.
Basically, with the latest 2-3 updates of Reactor and MQTTController, after a restart previous statuses are lost (for both Virtual and MQTT entities), until they're restored.
It's particularly annoying for Virtual Entities, because I have to set them all over again (I've coded some defaults at startup if the values are empty, but sometimes these are not the correct values before the update).
Not easy to reproduce, and logs are gone, but the first time I tought it was me hallucinating, the second one didn't bother too much, after the third I realized it's something not coming from me.
the behavior could be seen in this screenshot:
1c007fc2-4dbc-4476-8dca-e5aa111e4642-image.png
Any hint is appreciated.
Good morning,
So Home Assistant decided to change the default weather home format that I've been using for the past year and a half. I had two Global Expressions set up to pull the high and low temp forecast for the day. Now it's pulling null values.
094c9205-cc9e-4fcc-ac4f-1bf54acea299-image.png
In the dev tools, it now uses a new service (Weather. get forecasts), plural, where the old Weather.get forecast is depreciated and now longer functions.
8c7a1fcc-dd3f-4268-a0b7-29d542f86adc-image.png
It shows a templow field, and a temperature field, which I presume is the forecast high.
When I head back over to MSR, I'm having a hard time finding those values in the Entities tab.
c5ea1048-a72e-4647-9c50-9d0c5fd20767-image.png
wx.asoftime=null wx.ceiling=null wx.ceiling_unit=null wx.cloud_cover=null wx.condition_code=null wx.description="partlycloudy" wx.feels_like=null wx.humidity=57 wx.humidity_unit="%" wx.icon=null wx.location=null wx.precipitation_1hr=null wx.precipitation_24hr=null wx.precipitation_other=null wx.precipitation_type=null wx.precipitation_unit="in" wx.pressure=30 wx.pressure_unit="inHg" wx.temperature=55 wx.temperature_unit="°F" wx.visibility=null wx.visibility_unit="mi" wx.wind_compass=210.3 wx.wind_conditions=null wx.wind_direction="SSW" wx.wind_gust=null wx.wind_speed=6.28 wx.wind_speed_unit="mph" x_hass.domain="weather" x_hass.entity_id="weather.forecast_home" x_hass.services=["weather"] x_hass.state="partlycloudy" x_hass_attr.attribution="Weather forecast from met.no, delivered by the Norwegian Meteorological Institute." x_hass_attr.cloud_coverage=85.9 x_hass_attr.dew_point=40 x_hass_attr.friendly_name="New Windsor Weather" x_hass_attr.humidity=57 x_hass_attr.precipitation_unit="in" x_hass_attr.pressure=30 x_hass_attr.pressure_unit="inHg" x_hass_attr.supported_features=3 x_hass_attr.temperature=55 x_hass_attr.temperature_unit="°F" x_hass_attr.visibility_unit="mi" x_hass_attr.wind_bearing=210.3 x_hass_attr.wind_speed=6.28 x_hass_attr.wind_speed_unit="mph"There is a x_hass_attr.temperature, but that appears to be the current temperature, not the high that I found on the dev tools screenshot.
Any ideas?
Running:
Core
2024.4.3
Supervisor
2024.04.0
Operating System
12.2
Frontend
20240404.2
MSR: latest-24057-e9add9f5
Hey Patrick, I recently have been noticing that MSR has been acting up ie. it's been needing restarts and has been slow. I began trouble shooting by looking at the logs and have noticed the following errors for a lot of entities. I thought maybe a simple reboot of RPi was needed and I kept seeing the same errors in the system logs. I am oddly enough not seeing these same errors in the MSR logs. Where things started getting weird is whenever I rebooted MSR it wouldn't come back online .I would have to restart the RPi then it would come back online. I just restarted MSR again to capture logs and it restarted fine, so I guess its good for now? I think this is more or so a corrupted SD card issue rather a MSR issue but well being troubleshooting from here. The SD card is about 1-2 years old.
Apologies if this post is everywhere, I cannot consistently recreate any oddities that are happening, that's what is leading me to believe my SD is going bad.
PS: If anyone knows how to diagnose a corrupt SD card please chime in.
MSR latest-24057-e9add9f5
Home Assistant 2024.4.3
Raspberry Pi 3b+
This system has been running flawlessly year after year for the time changes twice a year literally since MSR came out so I was caught off-guard when this happened this morning.
Time in MSR browser is EST, time on RPi is local time (DST).
76ed5313-b9b9-46d4-b0f9-462c40e99750-image.png
195e61c5-58a7-4453-b96a-18cebae75550-image.png
I've rebooted the RPi I've restarted MSR after double-checking the time on the RPi. Used a completely different browser to eliminate any caching concerns. Double-checked MSR reactor.yamla5f23151-d691-4343-8499-8e77a55528e5-image.png
What am I missing here @toggledbits ?
Hi,
For the standard capabilities MSR sends both a value record and a units record to InfluxDB. The latter I would like not to send as they are not really any use for me and it will reduce the number of records send to my InfluxDB.
Is there a quick way to do this with a filter_entities line like: *>units?
Or do I have to update all capabilities to read like this:
power_sensor:
attributes:
value: true
Cheers Rene
Need assistance: How do I calculate time based upon current time and an ETA
-
Good morning,
I apologize if this subject has been covered. I did try the search, but I'm not coming up with any topics on my issue.I'm running userauth-24137-57b41335, bare metal installation on Fedora 39 Server.
I have a rule set up to turn the Eco mode off on my Nest Thermostat when the thermostat is set to Away (Rule State: Away Mode), the user (Driver) presence in my car changes to true, and the destination is set to home.
This works fine for most days, where I'm headed home from work (commute is about 45 minutes). What I don't want it to do is set change it to Eco mode if my ETA is more than an hour.
There is a sensor/entity for Time to Arrival when the Destination is set. What it appears to provide is the Time OF arrival/ETA, not time until arrival. If it was Time until Arrival, and it was a numeric value, I could simply test if the value is less than 60 and be done with it.
I pulled up the history through Home Assistant for my morning commute and this appears to be what it is providing.
So what I need to do is to do a calculation of the the ETA from the sensor value and subtract the current time, and get a value in minutes that I can determine if it's less than 60.
I believe I can do this with the local expression, but I don't see anything for the system time, or local time. Also, do the local expressions update themselves if the sensors do?
-
@tamorgen said in Need assistance: How do I calculate time based upon current time and an ETA:
I don't see anything for the system time, or local time.
In the docs, Date/Time Handling Functions.
@tamorgen said in Need assistance: How do I calculate time based upon current time and an ETA:
do the local expressions update themselves if the sensors do?
Absolutely.
-
@toggledbits said in Need assistance: How do I calculate time based upon current time and an ETA:
In the docs, Date/Time Handling Functions.
Okay, I missed that. That raises more questions.
I'm thinking it's easier to convert my ETA sensor to Unix Epic, and then do the math from there, correct? Do you have any examples on how I would go about doing this?
I went to lunch and pulled up MSR so I could get the actual, real time output of time to a destination.
-
May have spoke too soon....
Since the current value is null, it's going to throw a yellow triangle, because it can't be evaluated.
@toggledbits Is there a way to clear that flag for a local expression that is only periodically filled?
Correction: the value for the sensor is "unavailable", not null....
The value for the local expression becomes "null", because of the "unavailable" value for the sensor.
-
Try this:
D=getEntity( "hass>sensor_spaceball_1_time_to_arrival" ).attributes.string_sensor?.value, if "unavailable" === D then null else do D = time( D ), D = isNaN( D ) ? null : round( ( D - time() ) / 60000 ) done endif
The first line sets up the attribute value in a temporary local variable (i.e. available only inside the expression) called
eta
.Line 2 checks to see if it's the string unavailable, and if so, line 3 will cause this expression to produce null as a result.
Otherwise, the else block beginning at line 4 starts by converting the string in
eta
to a time in milliseconds (line 5), and if that result isn'tNaN
(line 6), then the difference between that time and now in minutes is computed.The
test ? true-expr : false-expr
form on line 6 is a ternary operator, if you haven't used it before. It's equivalent toIF test THEN true-expr ELSE false-expr ENDIF
, just shorter. -
@toggledbits,
Thank you Patrick. It's not throwing an alert now. Very elegant solution.I'll verify that it works once I get in the car after work and marked the thread as solved.