That's probably more appropriate to post on Mantis for @toggledbits, but since I know there's at least @Crille publishing templates, my intent with this post is to open a broader discussion.
Long story short: I'm starting to slowly add new template for Shelly Plus and I noticed I'll end up with a dozen more templates, all similar but simply different in trivial details, all sharing a large amount of code and all needing special cares when fixing bugs/adding features (as the latest wifi_status addition).
So, I'm wondering if it's time to start thinking of some sort of inheritance in templates, where I could just create a generic shelly_gen1 and use it as a base for shelly_relay, and this be used as the base for shelly_relay_power and so on.
I could probably achieve this with some sort of scripting on my side to generate templates via code, but maybe there's a better way of doing this, or it's already on the radar.
Good morning,
I'm running userauth-24137-57b41335 on Fedora 39, bare metal installation.
ZWaveJSController 0.1.23254
Home Assistant:
Core, 2024.5.3 Supervisor, 2024.05.1 Operating System, 12.3 Frontend, 20240501.1I'm trying to troubleshoot a Dynamic Group Controller and notification alert that I've set up for low battery level.
In my Reactor.config, I have the following lines:
name: "Dynamic Group Controller" implementation: DynamicGroupController config: groups: "zwavejs_dead": select: - include_group: "zwavejs" filter_expression: "entity?.attributes?.zwave_device?.status == 3" group_actions: true "low_battery": select: - include_capability: battery_power filter_expression: > entity.attributes.battery_power.level < 0.35The idea here is that I should only have members of this group that have a battery level below 35%. When I go into Entities, I show a whole slew of devices, none of which have a battery level below the threshold.
a77e445b-ab78-4752-a624-3c4117f34f90-image.png
I also tried setting up a rule to generate a push notification once a day, but with all of the group members, I've had to disable the rule. I believe I have it set up correctly, but I'm not 100% sure. I want the notification to tell me the battery level for that device as well.
289b4f68-03ba-49c0-8275-f0f197d13a3a-image.png
ce24a76e-6865-40bd-bd85-632e54d315a8-image.png dc837424-deb5-4ef7-8f0d-3676f1769535-image.png
Can anyone point to me what I may have misconfigured to get these results?
I should also note I'm only interested in ZWaveJS devices. It's showing me battery status for my iPad and car as well, which I don't need it to send me.
I need a handful of victims volunteers to help test previews of the next build of Reactor. A long-standing request was for "a simple login mechanism," but in practice, adding user authentication and competent access control turned out to be a pretty big project with a lot of big changes on both server and client sides. It's a bit more than I'm comfortable testing myself and springing out to everyone at once, so I'd like to work with a small group to put it through "sea trials."
Major changes/features include:
User authentication with hashed password storage; User group configuration with application restriction (admin, dashboard, API); Detailed control over API access, with user- and token-based authentication/authorization; Improvements to the HTTPS service; Improvements to UI coordination with the core for Rules and Reactions.If this sounds like something you'd like to help with, drop me a reply here in this thread or privately.
I have a case where I'm trying to send a MQTT message similar to the example below:
Topic: pool/set { "command": 4, "value": 1, "time": 0, "interval": 0 }But I need to set "value" so that it is an integer between 20-30. I thought I could use "dimming" capability here, but there's probably a better way. @therealdb ?
(Using userauth-24120-7745fb8d build in Docker)
There's a filtering capability for entities in reactor.yaml, but I have a case where I don't want to filter an entity altogether, but would like to "throttle" it, as this sensor updates every 1-2 seconds (and therefore unnecessarily takes database space).
Sensor data comes through home assistant, and seems that there's no way to control update interval at that end.
So I'm asking if plugin configuration could support limiting/throttling updates for certain entities?
Good morning,
Hopefully this is a simple request. I believe the title should be self explanatory, but just in case, I'll elaborate.
On the status tab, we all get alerts if a device state has changed (i.e., been removed). This is great, but when I go into the entities tab, I have to either type the name (or a portion thereof) of the device that has been removed, or I need to scroll all the way through my list of devices. This is infrequent, however, yesterday I replaced a failed device in my HAAS environment. It was a Z-Wave switch that is added using the Smart Scan QR code, which normally makes it pretty easy. However, some devices don't get fully added the first time around, so it'll add multiple entries into HAAS until it get's the S2 authentication correct and the device fully included. It did this to me yesterday, and I had to delete the incomplete device from my installation. MSR still saw the entities of that failed/incomplete switch entity, and I was left with 8 alerts and entities that I needed to removed.
It's not a huge problem, but this example was just one switch. If I were to add replace multiple devices at once, this could be a bit more annoying to remove. It would be helpful to be able to filter by removed entities, so I can find them all quickly and delete them. Continuing that train of thought, it would also be useful to have check boxes next to those lines, and perhaps do a select all type of thing so they could be deleted in one mouse click.
@toggledbits I have finally finished up the SSL using Let's Encrypt and am getting this from my local browser:
f3d0ac22-272e-46c1-b7e3-57b08bdd1555-image.png
21c04fe1-1760-4ce6-a4de-2285d3349940-image.png
3a7022db-5add-40a1-b9a2-0c0b97fa211b-image.png
I know you said in the docs that using a self-signed could lead to this but this is LE.
Hi @toggledbits,
I don't know if I'm the only one, so I'm reporting here first instead of opening a bug.
Basically, with the latest 2-3 updates of Reactor and MQTTController, after a restart previous statuses are lost (for both Virtual and MQTT entities), until they're restored.
It's particularly annoying for Virtual Entities, because I have to set them all over again (I've coded some defaults at startup if the values are empty, but sometimes these are not the correct values before the update).
Not easy to reproduce, and logs are gone, but the first time I tought it was me hallucinating, the second one didn't bother too much, after the third I realized it's something not coming from me.
the behavior could be seen in this screenshot:
1c007fc2-4dbc-4476-8dca-e5aa111e4642-image.png
Any hint is appreciated.
Build 21228 has been released. Docker images available from DockerHub as usual, and bare-metal packages here.
Home Assistant up to version 2021.8.6 supported; the online version of the manual will now state the current supported versions; Fix an error in OWMWeatherController that could cause it to stop updating; Unify the approach to entity filtering on all hub interface classes (controllers); this works for device entities only; it may be extended to other entities later; Improve error detail in messages for EzloController during auth phase; Add isRuleSet() and isRuleEnabled() functions to expressions extensions; Implement set action for lock and passage capabilities (makes them more easily scriptable in some cases); Fix a place in the UI where 24-hour time was not being displayed.I'm slowly migrating all my stuff to MQTT under MSR, so I have a central place to integrate everything (and, in a not-so-distant future, to remove virtual devices from my Vera and leave it running zwave only).
Anyway, here's my reactor-mqtt-contrib package:
Contrib MQTT templates for Reactor. Contribute to dbochicchio/reactor-mqtt-contrib development by creating an account on GitHub.
Simply download yaml files (everything or just the ones you need) and you're good to go.
I have mapped my most useful devices, but I'll add others soon. Feel free to ask for specific templates, since I've worked a lot in the last weeks to understand and operate them.
The templates are supporting both init and query, so you have always up-to-date devices at startup, and the ability to poll them. Online status is supported as well, so you can get disconnected devices with a simple expression.
Many-many thanks to @toggledbits for its dedication, support, and patience with me and my requests 🙂
Good morning,
So Home Assistant decided to change the default weather home format that I've been using for the past year and a half. I had two Global Expressions set up to pull the high and low temp forecast for the day. Now it's pulling null values.
094c9205-cc9e-4fcc-ac4f-1bf54acea299-image.png
In the dev tools, it now uses a new service (Weather. get forecasts), plural, where the old Weather.get forecast is depreciated and now longer functions.
8c7a1fcc-dd3f-4268-a0b7-29d542f86adc-image.png
It shows a templow field, and a temperature field, which I presume is the forecast high.
When I head back over to MSR, I'm having a hard time finding those values in the Entities tab.
c5ea1048-a72e-4647-9c50-9d0c5fd20767-image.png
wx.asoftime=null wx.ceiling=null wx.ceiling_unit=null wx.cloud_cover=null wx.condition_code=null wx.description="partlycloudy" wx.feels_like=null wx.humidity=57 wx.humidity_unit="%" wx.icon=null wx.location=null wx.precipitation_1hr=null wx.precipitation_24hr=null wx.precipitation_other=null wx.precipitation_type=null wx.precipitation_unit="in" wx.pressure=30 wx.pressure_unit="inHg" wx.temperature=55 wx.temperature_unit="°F" wx.visibility=null wx.visibility_unit="mi" wx.wind_compass=210.3 wx.wind_conditions=null wx.wind_direction="SSW" wx.wind_gust=null wx.wind_speed=6.28 wx.wind_speed_unit="mph" x_hass.domain="weather" x_hass.entity_id="weather.forecast_home" x_hass.services=["weather"] x_hass.state="partlycloudy" x_hass_attr.attribution="Weather forecast from met.no, delivered by the Norwegian Meteorological Institute." x_hass_attr.cloud_coverage=85.9 x_hass_attr.dew_point=40 x_hass_attr.friendly_name="New Windsor Weather" x_hass_attr.humidity=57 x_hass_attr.precipitation_unit="in" x_hass_attr.pressure=30 x_hass_attr.pressure_unit="inHg" x_hass_attr.supported_features=3 x_hass_attr.temperature=55 x_hass_attr.temperature_unit="°F" x_hass_attr.visibility_unit="mi" x_hass_attr.wind_bearing=210.3 x_hass_attr.wind_speed=6.28 x_hass_attr.wind_speed_unit="mph"There is a x_hass_attr.temperature, but that appears to be the current temperature, not the high that I found on the dev tools screenshot.
Any ideas?
Running:
Core
2024.4.3
Supervisor
2024.04.0
Operating System
12.2
Frontend
20240404.2
MSR: latest-24057-e9add9f5
Hey Patrick, I recently have been noticing that MSR has been acting up ie. it's been needing restarts and has been slow. I began trouble shooting by looking at the logs and have noticed the following errors for a lot of entities. I thought maybe a simple reboot of RPi was needed and I kept seeing the same errors in the system logs. I am oddly enough not seeing these same errors in the MSR logs. Where things started getting weird is whenever I rebooted MSR it wouldn't come back online .I would have to restart the RPi then it would come back online. I just restarted MSR again to capture logs and it restarted fine, so I guess its good for now? I think this is more or so a corrupted SD card issue rather a MSR issue but well being troubleshooting from here. The SD card is about 1-2 years old.
Apologies if this post is everywhere, I cannot consistently recreate any oddities that are happening, that's what is leading me to believe my SD is going bad.
PS: If anyone knows how to diagnose a corrupt SD card please chime in.
MSR latest-24057-e9add9f5
Home Assistant 2024.4.3
Raspberry Pi 3b+
This system has been running flawlessly year after year for the time changes twice a year literally since MSR came out so I was caught off-guard when this happened this morning.
Time in MSR browser is EST, time on RPi is local time (DST).
76ed5313-b9b9-46d4-b0f9-462c40e99750-image.png
195e61c5-58a7-4453-b96a-18cebae75550-image.png
I've rebooted the RPi I've restarted MSR after double-checking the time on the RPi. Used a completely different browser to eliminate any caching concerns. Double-checked MSR reactor.yamla5f23151-d691-4343-8499-8e77a55528e5-image.png
What am I missing here @toggledbits ?
Hi,
For the standard capabilities MSR sends both a value record and a units record to InfluxDB. The latter I would like not to send as they are not really any use for me and it will reduce the number of records send to my InfluxDB.
Is there a quick way to do this with a filter_entities line like: *>units?
Or do I have to update all capabilities to read like this:
power_sensor:
attributes:
value: true
Cheers Rene
I'm trying to replicate this
wallbox_set_number.PNG
into a MQTT entity where I could set a number with a min and max value.
I can't find a standard capability that fits or any documentation on local MQTT capabilities and the only post on the forum mentioning local MQTT capabilities is this post, is it even possible in current release?
My trial and error work in local_mqtt_capabilities.yaml isn't much to show as it's just a copy of mqtt_capabilities.yaml with changed names and then I got stuck.
Any guidance, examples, documentation, future feature request or denial would be much appreciated, thanks!
Reactor 24057-e9add9f5 bare metal
MQTTController 24050
Hi guys,
I've recently bought a new Govee outdoor permanent lights set, and I love it. WAF is pretty high, and the product is good quality. I hope to never run lights in the front of the house.
This new addition has found me searching for something to control these lights, locally. Govee has officials remote and LAN APIs and Home Assistant has it supported, but some undocumented stuff that's integrated into an Homebridge plugin that seems very promising. Without this plugin, my playlist is orchestrated via the cloud and that makes zero sense.
In the past I got some inspiration from plugins running on other platforms and Homebridge seems one of the most active. I could map its devices via HomeKit-local on HA, but I've decommissioned Homebridge years ago when we settled to Alexa (and I want to stay simple), so I had an idea: why get inspiration and rewrite things, when you could write an Homebridge adapter that could load any Homebridge plugin and run them natively under Reactor (MSR)?
I'm not sure if that's viable or made any sense, so I'm posting here to get feedback, encouragement and your thoughts. Anyone could be potentially interested in such a thing?
Hi- looking for a hint in where to start. My goal is to set a PIN code in a zwave kwikset lock triggered in a rule.
The device isn’t exposing methods to help. The x-hass.call-service looks promising, but what would the service name be?
Plan b would be send the zwave controller a config command- I don’t see any way to explicitly send a command through JS Zwave in my environment.
Running reactor bare metal. JS Zwave is running as an add on inside HASS OS.
Any tips are appreciated.
Hey crew, I'm trying to use MSR to control the RGB values of a Z-Wave bulb in Home Assistant.
Problem I'm running into - I would like to use 'rgb_color.set' to control this, but it doesn't work, instead it always passes the values '255,255,255' to HA no matter what values I enter within MSR.
More notes and examples below - I'm wondering if this is a formatting issue that I'm missing? Thanks for any help!
NOTES FROM TROUBLESHOOTING:
'rgb_color.set_rgb' works successfully, which seems strange. You'd think they would both be affected I've tried a couple different formats, like adding quotes, adding/removing spaces between the RGB values, nothing has fixed it.EXAMPLES:
When I use 'rgb_color.set_rgb', the values successfully carry over to Home Assistant:
f0f4befc-a642-428e-8923-e5f856ca7e2b-image.png
0af0a4f8-50b9-4100-b1e8-52a0de4cbcbb-image.png
But when I use 'rgb_color.set', the values DO NOT successfully carry over to Home Assistant:
9e2d7004-8085-4b70-bb3e-45614b7260a0-image.png 0d630228-c74b-4db8-89bd-2572a08608a3-image.png
DETAILS:
Bulb is LZW42 by Inovelli MSR version: stable-23242-5ee8e1d4HA DETAILS
Core 2024.2.5 Supervisor 2024.02.1 Operating System 12.0MSR in Alpine Docker
-
There hasn't been published a docker for this yet, I think @toggledbits wants to go through the beta phase first, as there may be many updates in a short time-frame which would have to be maintained in the docker.
You can follow the procedure i posted 5 days ago (in this thread) to make your own docker.
-
I'm just starting to look at ways to migrate away from Vera and just started working on a Home Assistant setup so I'd also love to have a go at testing this out in Docker on a QNAP but I don't really want to have to SSH into the NAS to do the docker compose, etc. I have only ever used the docker hub to add docker images but it looks like it's possible to use the QNAP container station to create a docker image locally but the steps you posted a few days ago in the thread don't seem to be in the format that the GUI needs, or I'm doing something wrong. If there aren't any QNAP gurus around I'll wait for something to come up.
-
The code above is for dockerfile. That is for making images, while docker-compose sets up containers based on images you make, or is found on docker hub.
No idea how QNAP works, you say it has input for dockerfile code? if so, the code above should work (the dockerfile code, not the compose!), its very standardized.. But unless you make the image yourself i guess you'll have to wait with MSR in docker until there is an official MSR image. -
Hi @d868, other than creating our own image, we’ll have to wait until one’s approved and then published on Docker Hub.
If it helps you I’m planning to do the same thing with MSR as I did with Home Assistant, and create a Container Station API build guide.
-
@parkerc thanks. I'm trying to avoid doing anything by command line if I can, but if you do end up creating a guide I'll see how I go with it. In the meantime I'll have a bit of a play around with Container station to see if I can get the syntax right for creating it myself via the GUI.
-
-
@buxton said in MSR in Alpine Docker:
Do you have a compose file that you're happy with.
Here's what I last used:
version: '3' services: web: container_name: reactor environment: REACTOR_DATA_PREFIX: /var/reactor image: toggledbits/reactor:latest restart: always network_mode: "bridge" expose: - 8111 ports: - 8111:8111 volumes: - .data:/var/reactor tmpfs: /tmp
To those dreading ssh into their machine, try using WinSCP and setting the file editor to Notepad ++. Makes editing linux files a breeze and you can set up your folder structures and permissions with the winscp gui.
If you're on an RPi (or really anything, but RPi was a breeze), setting up Samba and being able to open the files directly on the host via the share is a great time saver, too. Choices.
-
@perh said in MSR in Alpine Docker:
and not it will follow the host machines time.
@PerH I'm re-reading this... the bind mount fixes it, right? You meant "now"?
-
It's not a published image. The only image I make available is for Synology NAS x86. You'll need to build your own image using the generic package download (which you can get from the download button in the MantisBT bug tracker).
Have you built docker images before?
-
OK. Just PM me your full name and email address.
-
I'm happy to see an official docker image for MSR!
Just thought i'd share my docker-compose.yaml, which is only different in that i use docker volume instead of bind to host folder
Not sure if it's better, but i've done this to all dockers in my system.
This came up working well immediately, next is to stop the container and add my storage and config data.
version: "3.9" services: MSR: container_name: MSReactor restart: always image: toggledbits/reactor:latest-generic-amd64 ports: - "8111:8111" networks: # Optional for use of static IP inside the docker network. HAnett: # You could replace this and the subsequent lines with " network_mode: "bridge" " ipv4_address: 192.168.0.8 volumes: - type: volume source: MSR target: /var/reactor - "/etc/localtime:/etc/localtime:ro" environment: - TZ=Europe/Oslo - REACTOR_DATA_PREFIX=/var/reactor tmpfs: /tmp logging: driver: "json-file" options: max-file: "5" max-size: 2m networks: #Optional HAnett: name: HAnett driver: bridge ipam: config: - subnet: 192.168.0.0/16 gateway: 192.168.0.254 volumes: MSR: name: MSR
-
Nice work there! I'm going to save a copy even though I routinely use the Docker GUI (perhaps not available to all Synology NAS users) to set up MSR.
I, too, have been mulling the difference between
bind
andvolume
and Googling a while back did not seem to settle it for me. Surely it must make some difference?!Also, I gotta ask: Do you have any Sunrise/Sunset-based Rules? Only asking b/c for me, in 21117, my only Sunset/offset routine somehow failed to launch itself last night, but I'm uncertain whether that constitutes a 'bug' or just a misfire of some other kind.
-
I think the main advantage of volumes is that location is controlled by docker, and these locations aren't as easy to screw up if you mess around with the folder structure.. It also puts all volumes in a common folder (var/lib/docker/volumes) that can be copied to a tar or backup folder using one line, but thats just as easy if you organize bind folders the same way.. Let me know if you find other advatages.
I have no sunrise/sunset rules, i use light sensors for i.e. outside lighting.. I think about 90% of my "MSR bugs" have been PEBCAC, so check your logic.
-