Skip to content
  • Categories
  • Recent
  • Tags
  • Popular
  • Unsolved
Collapse
Discussion Forum to share and further the development of home control and automation, independent of platforms.
  1. Home
  2. General Discussion
  3. Voice Control and TTS Projects
Disaster recovery and virtualisation
CatmanV2C

Following on from my last thread, some progress has been made over the weekend.

With 18G of spanky RAM in my Synology DS224+. I've jumped into the murky world of virtualisation and already eliminated the need for two Raspberry Pi's from my system.

Home Assistant: In theory they provide an OVA file which is supported by the Synology. I couldn't get it to work, however, so grabbed a copy of the .img file they supply, renamed it .iso and imported it as a VM. Restored from my full back up and that all seems fantastic.

Minidnla Music server: Trivial. Grabbed a Debian .iso for Bookworm and copied that onto the NAS. Created a new machine which mirrored the specs of the Raspberry Pi, booted from the ISO then did an expert install. Once that was all stable with a basic core of stuff and networking, I've made a copy of that as a good base system. Then fired up minidnla on it, mounted my media and that's also woking. Not bad for a short weekend's work.

Still not sure about the main NUC though. I'm thinking of buying a new USB stick so I can mess around getting it working on the Synology before I do anything drastic.

Once that hurdle is sorted I'm torn between:

Using a brand new install of Bookworm, re-installing Z-way server, OpenLuup, AltUI, MSR and HA bridge, then restoring across or Making an ISO of the current system, importing that and upgrading in place (which will be pretty risk free since I can snapshot everything before I make any changes.)

Decisions, decisions.

C

General Discussion
RFC: When disaster strikes (sorry it's a bit verbose)
CatmanV2C

Hi everyone. Thanks for all your input recently on the topic of local notifications. I think we got some really interesting solutions 🙂

Back to more prosaic matters. Most of you will know that I've been messing around with this stuff for some years. My last major change was when I migrated from Vera, which was something like 4-5 years ago.

While my system has grown, it's not really altered very regularly, although I try to keep most of it kind of up to date.

Current set up:
Intel NUC that runs:
Bare metal install of Debian
Z-way server with Z-wave.me USB stick
Openluup
Altui
Multi system reactor
HA Bridge
Mosquito

Raspberry Pi
Running Home Assistant

About 40 varied Z-wave and Wifi devices

I also have a Synology DS224+ which may inform some responses.

Home Assistant recovery is pretty simple. I get a full backup of the system every night dumped onto my SAN and I know from experience that it would simply be a case of booting up a new install and feeding it the backup.

The NUC on the other hand....
Coming from a commercial IT world, I am becoming more and more conscious that I don't really feel I have a suitable disaster recovery plan, and my core system is running on hardware heading for 10 years old.

My initial thought, which I've kept putting off as it's awkward would be to grab a nice SSD, reboot the NUC into Mint or something similar and simply do a dd copy onto a new drive. I can get a replacement NUC on ebay simply enough, and keep it in a cupboard if anything other than the hard drive fails on the existing one, but this feels rather like a stop gap. However one immediate question:

If I had to use the replacement NUC would all the Z-wave devices simply carry on talking to the stick, or would they all need to be re-paired?

How easy would it be to move everything the NUC does (as a start) onto the NAS? Create a VM and clone the disc onto it?

Should I move to Docker? Something else?

What are the hive mind's thoughts?

Apologies if we've done this before, but while it all just works...

Cheers!

C

General Discussion
Eachen No Neutral smart wall switch to lights and Sonoff Mini R4 switch for LEDs
R

Hi all. First post so please be gentle.

I have an Eachen two-gang smart wall switch wired no neutral (with capacitor) connected to existing bathroom lights which works perfectly. It's also wired to a Sonoff Mini R4 Extreme connected to LED lights. I want the LED lights to switch on when the bathroom lights switch on (and vice versa). The Mini R4 works separately on my phone via Ewelink as well as on the Mini R4 itself (physical button). The switch is installed inside the wall and the rest of the components are in the ceiling / attic / roof cavity. The Mini R4 is set to Edge switch mode which works in my example I wired.

How I wired it:

cb919874-6933-460a-8cd0-f063bac88674-image.png

I have a video showcasing the example I wired today works. I could share it if required. Ignore the white cable. I only used it to power the example.

77ebbc23-83de-48ee-a4bf-247bfd24f121-image.png

3827ede6-cf5c-47aa-8fdb-c75470101c4a-image.png

The wiring diagram I used for the mini R4.

485de912-e656-4da3-b6f6-81cb076e0261-image.png

I wired it together with the existing lights of the bathroom so that L1 switches on both the Mini R4 and the bathroom lights:

a3ea5c93-a9ae-4aaf-8dce-24018bcdb4d1-image.png

This is the wiring diagram for the Eachen switch:
b867a3c7-c1ac-428c-a90f-7f0f4b62a609-image.png

The Eachen's first gang (L1) doesn't trigger the Mini R4 in any way.

Any help or advice will be much appreciated.

Thanks,
R

General Discussion
Hello and first network question
D

Just bought a couple of generic smart plugs and set them up easily using SmartLife app in the house I then plugged one into a workshop over 100m away This workshop has a hardwired internet connection with a separate wireless access router (not mesh) after doing a reset on the device and pairing to the new router it actually works from the house when my phone is connected to a completely separate wifi network - how is that possible ?
I did read something about these devices connecting to a server somewhere in China similar to IP cameras but there is no lag

General Discussion
Lights switches for warehouse
S

I need to replace about 15 traditional wall light switches (no neutral wire) to turn on/off all lights with one operation inside the warehouse. And still maintain the ability to control each light individually.

The preference is not to set up a Wifi for each switch to reduce the number of devices connected to the network, and also, they change the Wifi password regularly, so they do not want to change all 15 switches.

I am looking for some solution that will achieve this with either Bluetooth/RF or any other technology.
The warehouse dimensions are about 100ftx100ft with sheetrock walls.

Please assist.

General Discussion
'Random' lights turning on
CatmanV2C

I thought I had created a topic on this some time back, but can't find it to close the loop.

The issue was the lights on my drive appeared to be randomly switching on, with nothing from MSR logging and just a simple 'turn this on' in Openluup logs.

Finally got to the bottom of it this morning, which might help someone.

Turns out that somehow Alexa has decided that my drive lights are part of my Living room. If I tell her 'Living room lights on' the drive lights also come on. And if I tell her to turn them off, they also go off.

Which is madness because they are NOT in the living room group.

Current solution is to disable the drive lights in the Alexa app, which is fine as I never need to voice control them.

C

General Discussion
New to Home Automation Looking for a Single app?
A

Hi All

Hopefully this place looks like a helpful forum as I’m quite new to all this!

I’ve had a few devices all working separately /through their proprietary apps but we’re just finishing off a large house extension and this has added to the list.

I’d ideally like to be able to view/switch a number of different devices on one screen/head end but have no idea where to start.

The devices we have/will have shortly are as follows;

Zigbee Smart Sockets
Zigbee smart switches (for lights)
Heatmiser Neo Underfloor Heating (this runs from a Samsung ASHP but that part is automatic)
Samsung VRF air conditioning (currently using Smart Things App)
Hive (2xLTHW heating circuits in the existing house and Hot Water)
Ring (doorbell!)
Hik Vision PoE CCTV

We have lots of appliances (Neff N70) which we can control remotely but not too fussed about controlling those at the
Moment)

Any help/recommendations would be appreciated!

Thanks

Adrian

General Discussion
Sending data to a USB port to interface with a wireless switch
F

I have a legacy home automation set-up running on Windows XP. the computer and software have now died.
I have written a very nice Excel VBA program to replace the software and it can run on any modern Windows system.
My only remaining problem is to output the correct signal to a USB port to trigger the wireless switches.
Has anybody done a similar exercise. Please help.

General Discussion
Looking for Remote Switch boxes that can also be used with a wireless Decora Style Switch.
V

Hi All,

Kind of new to Home Automation. Started off Using Amazon Echo units and added a Samsung SmartThings hub. I have mostly been using plug in modules for turning lights on and off. I live in a very rural area where the internet goes out a lot. I eventually want to change to to a non internet Hub so things will work without needing an internet connection. But I will post with those questions at a later date.

So, the task at hand is this: I have flood lights at each corner of my house. They are currently controlled by switches at the front and back doors. I would like to add Security Cameras to each corner also. I can easily find small Wifi switches to put into the electrical box where the flood lights are located, then I can terminate the leads together behind the Decora switch to have constant power. Then I can use the constant power up at the lights electrical box to power the security cameras. I would also like to have a wireless switch to take the place of the Decora switch to be able to turn the lights off and on.

I cannot seem to find a product like this. It seems I can find the small wired in switch boxes that will also come with external smart wall switches, but the wall switches are an external box that does not fit in or cover the existing Wall switch electrical box. I can also find Wireless Decora switches that come with a remote wired in small switch box , but they all seem to be RF and do not integrate with a Smart Hub.
I am hoping someone here knows of a product that matches what I am looking for. Any help would be appreciated.

Also any recommendations for Wireless Security cameras are welcome.

Thanks for any help.

General Discussion
Just starting what hub is best.
I

Dear Forum,

I am just starting a smart home system. I've wanted to do this for 10 years at most and really would like to get a start. What I have are a couple of SONOFF wifi relays, some 433 (Hz/mHz) switches ( not wifi ) a couple of wifi lightbulbs, and I'd like to expand wifi thermostat, leak/water detectors, garage door openers and what ever else I can think of.

In the SONOFF items I have it's a particular app, the wifi bulbs are another app, and if I do a thermostat there might be another app. My wife is not a Luddite but she damn sure doesn't want to have to trouble shoot if/why a particular app breaks down.

So in what I do understand about smart home things is that I need/want a HUB. I spent 15 years doing some programming so I do have some computer ability, though I'd prefer to stay away from HAVING to line command operate the hub.

I would like a list of HUB's that people have found to be the best. Even better are links to let's say Amazon for that hub.

Regards from Noob Smart Home,
Barry

General Discussion
Logitech logic
CatmanV2C

Hello lovely people. Long time and all that. Hope you're all doing OK.

Bit of a left field one here, looking for extra eyes more than an answer and you're the most logical bunch I know 🙂

Part of our HA system is a Logitech Elite hub and remote control.
This is programmed to control my Cyrus Stereo, our TV, and HDMI switch and our Virgin V6 box.

I've been away for a couple of days. Got back this evening to (eventually) work out that the V6 box appears to be not accepting any commands from the Logitech.

Everything has been rebooted.
Logitech uses IR to control
Cyrus: Fine
TV: Fine
HDMI: Fine

Remote control uses Bluetooth to control Hub.
All commands from the Remote to the hub are executed (one might assume correctly) as the activity LED responds, and if you're controlling (say) the Cyrus, all works fine.

iOS App can be used to control Hub over the WLAN:
All commands from the App re executed (one might assume correctly) as the activity LED responds, and if you're controlling (say) the Cyrus, all works fine.

Native remote (that uses as far as I know bluetooth) to control the V6 box works fine.

V6 box refuses to acknowledge any command other than from the native remote. Remote or app provoke absolutely zero response from the V6 box.

This is annoying, but damned if I can think of any logical reason. One might assume a firmware update on the V6 box, but given that the Hub simply emulates the native remote, that seems unlikely.

I'm struggling to think of where even to start troubleshooting this, so any random thoughts would be appreciated.

My initial approach is to buy another hub in case there's a different radio set that's failed in the hub...

TIA!

C

General Discussion
Recommendation for a smart in-wall plug
D

I currently have an HVAC system in the attic - for heating and A/C. 120v is supplied to the unit to run the gas heating. A/C uses 240v. I have an ecobee thermostat...which sometimes goes offline....not often. When it goes offline, I need to turn the 120v power to the HVAC system off and then back on (the ecobee gets its power from the HVAC system). That resets the ecobee and all is fine. I spend the summer away from this house and if the ecobee goes offine..I have no current method to reset the HVAC 120v power remotely. My idea is to replace the current 120v plug in the attic with a smart plug...then I can remotely turn the 120v power off and the ecobee will reset and come back online. I use Wyze and Lutron Casita in the house currently and was hoping I could find an in-wall smart plug from Wyze or Lutron. Obviously, I don't need diming, etc...just the ability to turn the plug power on/off. I've seen some options...but one problem I have is the attic can reach up to 135F in the summer...many of the smart plugs I've seen are not rated for that temperature. Might any of you have any thoughts on a smart plug I might want to look at? I don't want to invest in anything that would require a new hub - so either WiFi based or Casita HUB based. I need 120v and 15amp ratings. Thanks in advance.

General Discussion
Expression Evaluation - Last Seen Date/Time
S

I am trying to run a reaction that turns on lights if a sensor has not been tripped for 2 minutes. Basically, when a garage door is open, turn on inside lights if nothing has been sensed for 2 minutes. My question has to do with the expression/variable for "Last Seen". The variable never gets updated over time since the last seen event never changes.

Screenshot 2024-09-02 191632.png

In the screenshot above, the reaction checks for any garage door as well as the variable called "GarageLastEntry". The expression for this variable is displayed below:

Screenshot 2024-09-02 191651.png

The problem that I am experiencing is that the variable never changes over time. I understand that this is because the "last seen" variable does not change over time when there is no activity. In this screenshot, the value shows 0.029... This can also be seen as the current value in the original reaction screenshot above. After 10 minutes, this value should be 10. However, when a garage door is opened, the variable does not get updated and thus the rule does not become true since .029 is less than 2.

When I go to the variable and click on the > icon, the variable then gets updated as expected as seen below:
Screenshot 2024-09-02 191711.png

So the ultimate question is, how do I use a rule that can use a variable such as "last seen"? Do I need to create another variable or reaction that multiplies this by 1 every minute? From what I read in the manual, a variable is evaluated every time it is included in a reaction. But this is not what I am seeing.

I also want to ask another question related to this variable. It seems like Reactor continuously deletes this variable and I have to keep recreating it? I have never experienced this with MSR so wanted to ask if this is a common problem or if my definition is causing this.

Any info is appreciated!!!

General Discussion
UK - Yale Smart Locks and Wi-Fi Bridge
S

BACKGROUND

I have been using 4 x Yale Contactless Connected Door Locks for several years (they use either a rfid tag or code to enter)

I have also been using 1 x Yale L1 Door Lock on the main front door and this connects via Yale Software

Yale contacted me to advise the L1 Lock software was being withdrawn and I needed to install a Yale Access Module into the existing lock and a Wi-Fi Bridge to link it with the newly released software

ALL of the above was working just fine.

RECENT

Yale emailed to advise I should add a Yale Access Module to each of the 4 other locks as this would link with the updated software via the Wi-Fi Bridge.

They offered a deal of just £4 each for these Modules so I got them.

THE PROBLEM

I found that only 2 of these modules would slot easily into the locks - two of them bent the pins and one of those snapped the female part in a lock (I do have a spare lock but thats not the point).

Anyway, I began to set-up the two fitted Modules with the Wi-Fi Bridge and I eventually found (thanks Google, NOT Yale) that I now need 1 x Wi-Fi Bridge PER LOCK (£50 each).

QUESTION

Does anyone know of a compatible Wi-Fi Bridge which works with Yale AND can handle multiple connections (ie 5 all 5 of my locks) ?

THANK YOU

General Discussion
iCOMEN boiler switch
V

Hello,
I had an iCOMEN boiler switch that worked for many years. And I used iCOMEN app on my phone to manage it. Short time ago app started to have an error message that it cannot connect to the server, and after some time the device also stopped working.

General Discussion
Would you use a self-hosted geofencing solution?
toggledbitsT

Some of you may know that I took at shot at building an alternate geofencing solution for Vera. The core of it was system agnostic, using the OwnTracks application and AWS lambdas to track devices and keep a central data, then disseminate that to the Vera via a websocket-based plugin. It worked with other apps as well, including Tasker and GPSLogger, but of the dozen people that were testing it, most used OwnTracks.

A lot was learned in the process, not the least of which is that the success of any such solution is highly dependent on the phone and its settings. Phone manufacturers love to set things up for the longest battery life, of course, but that's usually very anti-geofencing behavior. In the case of at least one brand, it was unusable and the settings could not be modified. It was also cost-prohibitive to maintain on Amazon, as AWS grabs a dime here and a dollar there and before you know it, it added $100/month to my AWS bill, which my wife deducted from my Scotch budget. Unacceptable.

But it's quite reasonable to use OwnTracks to a local endpoint, and I could pretty easily replicate the functionality as a local application, or maybe even as an additional endpoint built into MSR's API (still separate port and process, but in the package).

So the question really is... would you do it, or would you be too concerned about the security risks associated (e.g., dynamic DNS and NAT mapping in the firewall necessary for the phone to contact the service when not on LAN)?

General Discussion
Forum sysops
A

Hello forum instigators.

Not sure who host/runs the forum software but a couple of challenges:

The chat is not currently usable, as the scrolling is all not right and it's not possible to read chats or send chats reliably.

There are a lot of female members that should perhaps be on another forum; where they can advertise their skills more appropriately. Note: I agree it's a job, like any other.

Whoever you are - thank you for your invaluable work.

General Discussion
looking for a light switch with presence sensor?
T

I run a B&B and am looking for a way to turn the lights off whenever a room is unoccupied for X amount of time. The guest should still be able to turn the lights on and off manually, but should not be able to disable the auto turn off feature if the room is unoccupied.

I guess I am looking for a light switch with a built in presence sensor? I guess a presence sensor would be better as if it is a motion sensor, the lights may go off unwanted if the guest fails to make sufficient movement e.g. if the guest is lying down watching a film.

Are there any products on the market that would work for my application?

General Discussion
Looking for Bluetooth device for smartphone audio transmission
M

Hello,

I am in search of a device capable of using Bluetooth to connect with a smartphone and serve as its primary sound source on demand. This device should function similarly to conventional Bluetooth headphones, which automatically become the phone's sound output upon activation. However, this device should differ in that it transmits the audio signal to an amplifier via a jack, SPDIF, or similar connection. Alternatively, it could be an integrated amplifier that directly sends the signal to passive speakers.

The control of this process should be manageable through an API such as MQTT, REST, MODBUS, or similar. Are you aware of any devices that operate in this manner?

The concept is as follows: upon entering the bathroom, I would press a wall-mounted switch. This switch would send a signal to the Bluetooth device, prompting it to connect to my smartphone and seamlessly continue playing the audiobook I am currently listening to. Instead of using the phone's speakers, it would seamlessly start playing through ceiling-mounted speakers.

Many thanks 🙂

General Discussion
Beginner assistance
R

Hi folks,

I currently have some cheap Zigbee hub and some Amazon Alexas running my smart home which mostly consists of Zigbee power strips and Zigbee battery powered switches.

It all worked OK originally, but now whenever I press a Zigbee switch the light in the corresponding plug switches on then immediately off again.

If I ask Alexa to turn the light on it works fine. Likewise if I switch it on from my phone.

Any ideas what the issue could be?

I've tried unplugging the hub a number of times but that doesn't seem to fix it.

I was thinking about getting a Homey Pro 2023 to speed things up (tmas the Zigbee hub seems to be really slow now as well, for some reason) but I'm not sure about that either.

Any suggestions greatly appreciated!

General Discussion

Voice Control and TTS Projects

Scheduled Pinned Locked Moved General Discussion
18 Posts 6 Posters 1.2k Views
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • rafale77R Offline
    rafale77R Offline
    rafale77
    wrote on last edited by rafale77
    #1

    Some of my favorite projects I have been using on my setup for over 5 years:
    Bridge the vera or openluup to amazon echo through a local hue emulator. A much faster solution than the vera native bloatware as the only cloud service is used by this alternative is the voice recognition. It was initiated for vera control but later expanded to many other platforms like the logitech Harmony and other controllers. No cloud to cloud so no need for mios servers:

    GitHub - bwssytems/ha-bridge: Home automation bridge that emulates a Philips Hue light system and can control other systems such as a Vera, Harmony Hub, Nest, MiLight bulbs or any other system that...

    GitHub - bwssytems/ha-bridge: Home automation bridge that emulates a Philips Hue light system and can control other systems such as a Vera, Harmony Hub, Nest, MiLight bulbs or any other system that...

    Home automation bridge that emulates a Philips Hue light system and can control other systems such as a Vera, Harmony Hub, Nest, MiLight bulbs or any other system that has an http/https/tcp/udp int...

    The equivalent for Apple Siri:

    GitHub - hackworth/VeraHomeKitBridge

    GitHub - hackworth/VeraHomeKitBridge

    Contribute to hackworth/VeraHomeKitBridge development by creating an account on GitHub.

    Alternative SONOS TTS implementation from all the plugin versions applicable for any platform since it is an API you can call. It is run also locally on a MacOS desktop in my case but can run on anything running nodeJS. For the TTS to be fully local though, you will need a mac or bear with the robotic voice of maryTTS. I have been hesitant to move my TTS to the amazon echos (project by @therealdb), but the echos lack synchronization and are cloud dependent which causes a 3-5s delay I do not have with this local solution, so this remains my choice:

    GitHub - jishi/node-sonos-http-api: An HTTP API bridge for Sonos easing automation. Hostable on any node.js capable device, like a raspberry pi or similar.

    GitHub - jishi/node-sonos-http-api: An HTTP API bridge for Sonos easing automation. Hostable on any node.js capable device, like a raspberry pi or similar.

    An HTTP API bridge for Sonos easing automation. Hostable on any node.js capable device, like a raspberry pi or similar. - jishi/node-sonos-http-api

    Use my fork if you need to install on Catalina because some fixes are needed and my pull request from months ago has not yet been merged.

    1 Reply Last reply
    0
    • therealdbT Offline
      therealdbT Offline
      therealdb
      wrote on last edited by
      #2

      My plug-in got device sync lately, but you're right, it's never really sync'ed, it depends on Amazon's servers. Overall I like it and I will move to a similar setup (ha-bridge) very soon, because I want blinds/temp sensors and I'm tired of writing scenes 🙂

      --
      On a mission to automate everything.

      My MS Reactor contrib
      My Luup Plug-ins

      1 Reply Last reply
      1
      • CatmanV2C Offline
        CatmanV2C Offline
        CatmanV2
        wrote on last edited by
        #3

        This is so much faster than the Vera skill

        C

        The Ex-Vera abuser know as CatmanV2.....

        1 Reply Last reply
        0
        • rafale77R Offline
          rafale77R Offline
          rafale77
          wrote on last edited by
          #4

          I know... now you understand what I was talking about when I was referring to cloud to cloud nonsense in the old place and my mehhh comments in the "Alexa turn on the Christmas lights on" thread... We have been doing it faster better in every way for over 5 years thanks to the community!

          1 Reply Last reply
          1
          • CatmanV2C Offline
            CatmanV2C Offline
            CatmanV2
            wrote on last edited by CatmanV2
            #5

            Yep, In for a penny, as we say over here. It'll depend on when my UZB gets here, but I suspect I'll be Vera free by the end of the week.

            Is it possible to change the icons that Alexa shows for HA bridge devices? Not that I ever look, but....

            Thanks for all your help

            C

            The Ex-Vera abuser know as CatmanV2.....

            1 Reply Last reply
            0
            • CatmanV2C Offline
              CatmanV2C Offline
              CatmanV2
              wrote on last edited by
              #6

              Where's the best way to get help with creating the specific commands required for HA Birdge to control a thermostat? The build button has created on, off (not hugely useful) and 'Dim' URLs, but I don't see how you can pass a specific temperature to it? Also I'm pretty sure that SetLoadLevel is not the correct command. It should be something like SetCurrentSetpoint?

              Cheers

              C

              The Ex-Vera abuser know as CatmanV2.....

              1 Reply Last reply
              0
              • CatmanV2C Offline
                CatmanV2C Offline
                CatmanV2
                wrote on last edited by CatmanV2
                #7

                As ever a voyage of discovery 🙂
                So my logs show this when the temperature is changed automatically:

                08	06/21/20 16:58:03.905	JobHandler_LuaUPnP::HandleActionRequest device: 80 service: urn:upnp-org:serviceId:HVAC_UserOperatingMode1 action: SetModeTarget <0x73c25520>
                08	06/21/20 16:58:03.906	JobHandler_LuaUPnP::HandleActionRequest device: 80 service: urn:upnp-org:serviceId:TemperatureSetpoint1_Heat action: SetCurrentSetpoint <0x73c25520>
                06	06/21/20 16:58:03.907	Device_Variable::m_szValue_set device: 80 service: urn:upnp-org:serviceId:TemperatureSetpoint1 variable: SetpointTarget was: 18.00 now: 21.00 #hooks: 0 upnp: 0 skip: 0 v:(nil)/NONE duplicate:0 <0x73c25520>
                

                My new shiny HA Bridge command is this:

                http://192.168.70.249:3480/data_request?id=action&output_format=json&DeviceNum=10080&serviceId=urn:upnp-org:serviceId:TemperatureSetpoint1_Heat&action=SetCurrentSetpoint&SetpointTarget=${intensity.byte}
                

                And the log shows this

                08	06/24/20 12:17:39.117	JobHandler_LuaUPnP::HandleActionRequest device: 80 service: urn:upnp-org:serviceId:TemperatureSetpoint1_Heat action: SetCurrentSetpoint <0x724d1520>
                08	06/24/20 12:17:39.118	JobHandler_LuaUPnP::HandleActionRequest argument DeviceNum=80 <0x724d1520>
                08	06/24/20 12:17:39.118	JobHandler_LuaUPnP::HandleActionRequest argument SetpointTarget=57 <0x724d1520>
                08	06/24/20 12:17:39.118	JobHandler_LuaUPnP::HandleActionRequest argument action=SetCurrentSetpoint <0x724d1520>
                08	06/24/20 12:17:39.118	JobHandler_LuaUPnP::HandleActionRequest argument serviceId=urn:upnp-org:serviceId:TemperatureSetpoint1_Heat <0x724d1520>
                02	06/24/20 12:17:39.118	ZWaveNode::ReceivedMessage serv urn:upnp-org:serviceId:TemperatureSetpoint1_Heat action SetCurrentSetpoint unhandled <0x724d1520>
                02	06/24/20 12:17:39.119	JobHandler_LuaUPnP::RunAction device 80 action urn:upnp-org:serviceId:TemperatureSetpoint1_Heat/SetCurrentSetpoint failed with -115/Device does not handle service/action <0x724d1520>
                

                So clearly I'm not quite there. Also my Set to 22 appears to have been converted to 57? In case that was out of range I tried to set to 10 and that logged a SetpointTarget of 26.

                Any thoughts on that?

                Cheers

                C

                The Ex-Vera abuser know as CatmanV2.....

                1 Reply Last reply
                0
                • rafale77R Offline
                  rafale77R Offline
                  rafale77
                  wrote on last edited by rafale77
                  #8

                  This is likely a formatting problem just like your post 😉
                  I have not actually implemented voice control of my thermostat. I instead created a plugin to make it completely automated so I never have to touch it. It uses the room feature, combining data inputs from temperature sensors in each room and outdoor, motion and door/window sensors to set actions on register vent openings and the thermostat.
                  But back to topic: There maybe some conversion going on between temperature and percentage/hex. It looks like it is taking your input as a percentage (0-100) and outputting it as a byte (0-255), basically using a x2.55 factor. It is actyally in your code: "intensity.byte"
                  try "intensity.percent" which will not convert the numeral since the echo api uses percentages.

                  1 Reply Last reply
                  1
                  • CatmanV2C Offline
                    CatmanV2C Offline
                    CatmanV2
                    wrote on last edited by
                    #9

                    Fixed the formatting 😄

                    Thanks!

                    C

                    The Ex-Vera abuser know as CatmanV2.....

                    1 Reply Last reply
                    0
                    • CatmanV2C Offline
                      CatmanV2C Offline
                      CatmanV2
                      wrote on last edited by
                      #10

                      OK, thanks. intensity.percent worked perfectly in terms of passing the SetpointTarget to 22 👍

                      Can't figure out why SetCurrentSetpoint doesn't work though.

                      C

                      The Ex-Vera abuser know as CatmanV2.....

                      1 Reply Last reply
                      0
                      • rafale77R Offline
                        rafale77R Offline
                        rafale77
                        wrote on last edited by
                        #11

                        That's because the parameter you use is incorrect. The parameter for SetCurrentSetpoint is NewCurrrentSetpoint. You can see that by going into ALTUI, open the device, under the action menu... Look up SetCurrentSetpoint.

                        1 Reply Last reply
                        1
                        • CatmanV2C Offline
                          CatmanV2C Offline
                          CatmanV2
                          wrote on last edited by
                          #12

                          Wow that's a useful thing to learn.

                          Thanks so much!

                          C

                          The Ex-Vera abuser know as CatmanV2.....

                          1 Reply Last reply
                          0
                          • CatmanV2C Offline
                            CatmanV2C Offline
                            CatmanV2
                            wrote on last edited by
                            #13

                            It actually needs to be this:

                            http://127.0.0.1:3480/data_request?id=action&output_format=json&DeviceNum=10080&serviceId=urn:upnp-org:serviceId:TemperatureSetpoint1&action=SetCurrentSetpoint&NewCurrentSetpoint=${intensity.percent}
                            

                            C

                            The Ex-Vera abuser know as CatmanV2.....

                            1 Reply Last reply
                            0
                            • LibraSunL Offline
                              LibraSunL Offline
                              LibraSun
                              wrote on last edited by LibraSun
                              #14

                              Meanwhile (and PLEASE correct/guide me if I'm in the wrong sub-Topic to ask this), I'm back in the mid-2020 era of trying to get my Vera Plus back to doing TTS through my Sonos Beam device, with the help of @toggledbits latest hotfix 21314.1625 grafted onto the SONOS 2.0 plugin.

                              Thing is, I've gone through all the traditional routes:

                              • Ensured my MS Azure Cognitive account is up-to-date;
                              • Double-checked all settings* (IP, Volume, Zone, etc.) and keys are current;
                              • Checked Vera's LuaUPnP logs, and found:
                              50	03/16/21 17:45:17.880	luup_log:321: Sonos: (TTS) Engine "Azure Speech Service" created "http://192.168.86.30/port_3480Say.322.mp3" <0x773df320>
                              06	03/16/21 17:45:17.981	Device_Variable::m_szValue_set device: 322 service: urn:upnp-org:serviceId:AVTransport variable: TransportStatus was: ERROR_RESOURCE_NO_LONGER_AVAILABLE
                              

                              which to my eye indicates a pathname issue (after port_3480)?

                              But I can't find any current discussion among others having the same SILENCE problem.

                              Anyone in the same boat? Got a new list of Troubleshooting Steps for me to undertake?

                              THANKS! - Libra

                              OTHER SETTINGS TO NOTE, in case they matter:

                              TTS SETTINGS
                              Default Engine: Azure Speech Service
                              Region: southcentralus
                              Voice: engine default: Jessa
                              Endpoint: https://vera-tts.cognitiveservices.azure.com/
                              Requestor: automatic (recommended)
                              UPnP Proxy: Installed

                              SONOS VARIABLES
                              TTSBaseURL = (blank)
                              TTSBasePath = (blank)

                              1 Reply Last reply
                              0
                              • M Offline
                                M Offline
                                mrFarmer
                                wrote on last edited by
                                #15

                                Hi Libra,

                                In the file name for the mp3 the slash charter between port_3480 and Say is missing. I.e. it should read .../port_3480/Say...

                                Cheers Rene

                                1 Reply Last reply
                                0
                                • toggledbitsT Offline
                                  toggledbitsT Offline
                                  toggledbits
                                  wrote on last edited by
                                  #16

                                  It's not just the slash that's missing; there's a directory name before it as well. Really the only way that happens is a problem with the content of TTBaseURL. But, if during experimentation you have a problematic value, it's entirely possible that (broken) URL gets stored in the cache entry for the speech item, and then every time you speak it and it gets a cache hit, it will pull out that broken URL. So a few things to do here:

                                  First, let's disable the cache during testing/troublesheeting: set UseTTSCache to 0.

                                  Then, let's make sure TTSBasePath and TTSBaseURL get their default (computed) values, and not rely on the Vera UI to tell us they "look" blank:

                                  luup.variable_set( "urn:toggledbits-com:serviceId:SonosSystem1", "TTSBaseURL", "", sonos-master-device-num)
                                  luup.variable_set( "urn:toggledbits-com:serviceId:SonosSystem1", "TTSBasePath", "", sonos-master-device-num)
                                  

                                  Finally, debug on for "Plugin" and "TTS" in the master device settings, reload Luup, hard refresh browser.

                                  Getting as far as it did to see the error message you posted is a good sign. With this clean slate, if there's still something causing a problem, it will be easier to run down.

                                  Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                                  1 Reply Last reply
                                  0
                                  • LibraSunL Offline
                                    LibraSunL Offline
                                    LibraSun
                                    wrote on last edited by
                                    #17

                                    YES! Did all the things, and voilà!! Didn't even have to check the logs... Sonos she talk to me now!! 🙂

                                    THANK YOU SO MUCH. I'll go turn off the extra logging now.

                                    1 Reply Last reply
                                    0
                                    • toggledbitsT Offline
                                      toggledbitsT Offline
                                      toggledbits
                                      wrote on last edited by
                                      #18

                                      OK. And you can probably turn the cache back on as well. I'm betting is just had some cached bad URLs, so before turning it back on, SSH into your Vera and rm -rf /www/sonos/ttscache to clear the cache entirely. It will be recreated as you go.

                                      Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                                      1 Reply Last reply
                                      0

                                      Recent Topics

                                      • Disaster recovery and virtualisation
                                        CatmanV2C
                                        CatmanV2
                                        0
                                        5
                                        540

                                      • Remote access of Zwave stick from Z-wave server
                                        CatmanV2C
                                        CatmanV2
                                        0
                                        3
                                        245

                                      • Organizing/ structuring rule sets and rules
                                        G
                                        gwp1
                                        0
                                        5
                                        318

                                      • Moving MSR from a QNAP container to RP 5 - some issues
                                        G
                                        gwp1
                                        0
                                        5
                                        277

                                      • Widget deletion does not work and landing page (status) is empy
                                        G
                                        gwp1
                                        0
                                        4
                                        251

                                      • Need help reducing false positive notifications
                                        T
                                        tamorgen
                                        0
                                        7
                                        441

                                      • Reactor (Multi-System/Multi-Hub) Announcements
                                        toggledbitsT
                                        toggledbits
                                        5
                                        120
                                        35.1k

                                      • Deleting widgets
                                        toggledbitsT
                                        toggledbits
                                        0
                                        4
                                        427

                                      • MQTT configuration question
                                        tunnusT
                                        tunnus
                                        0
                                        11
                                        574

                                      • System Configuration Check - time is offset
                                        G
                                        gwp1
                                        0
                                        8
                                        551
                                      Powered by NodeBB | Contributors
                                      Hosted freely by 10RUPTiV - Solutions Technologiques | Contact us
                                      • Login

                                      • Don't have an account? Register

                                      • Login or register to search.
                                      • First post
                                        Last post
                                      0
                                      • Categories
                                      • Recent
                                      • Tags
                                      • Popular
                                      • Unsolved