@toggledbits I understand that you do not perform testing on Mac computers but thought I'd share the following with you in case something can be done.
I started seeing these errors with version 24302. I thought that upgrading to 24343 would have fixed the issue but unfortunately not. I either have to close the browser or clear the cache for the errors to stop popping-up but they slowly come back.
I see these errors on the following browsers:
Safari 16.6.1 on macOS Big Sur Safari 18.1.1 on MacOS Sonoma DuckDuckGo 1.118.0 on macOS Big Sur and Sonoma Firefox 133.0.3 on macOS Big Sur Chrome 131.0.6778 on macOS Big SurHere are the errors
Safari while creating/updating an expression
@http://192.168.0.13:8111/reactor/en-ca/lib/js/reaction-editor.js:543:91 makeExprMenu@http://192.168.0.13:8111/reactor/en-ca/lib/js/reaction-editor.js:537:28 @http://192.168.0.13:8111/reactor/en-ca/lib/js/reaction-editor.js:92:64 @http://192.168.0.13:8111/reactor/en-ca/lib/js/reaction-editor.js:89:68 each@http://192.168.0.13:8111/node_modules/jquery/dist/jquery.min.js:2:3133 @http://192.168.0.13:8111/reactor/en-ca/lib/js/reaction-editor.js:89:35 @http://192.168.0.13:8111/client/MessageBus.js:98:44 forEach@[native code] @http://192.168.0.13:8111/client/MessageBus.js:95:54 @http://192.168.0.13:8111/client/MessageBus.js:106:44 @http://192.168.0.13:8111/client/Observable.js:78:28 signalModified@http://192.168.0.13:8111/reactor/en-ca/lib/js/ee.js:146:21 signalModified@http://192.168.0.13:8111/reactor/en-ca/lib/js/expression-editor.js:40:29 reindexExpressions@http://192.168.0.13:8111/reactor/en-ca/lib/js/expression-editor.js:71:32 @http://192.168.0.13:8111/reactor/en-ca/lib/js/expression-editor.js:608:40 dispatch@http://192.168.0.13:8111/node_modules/jquery/dist/jquery.min.js:2:40040DuckDuckGo while clicking on status
http://192.168.0.13:8111/reactor/en-ca/lib/js/reactor-ui-status.js:789:44 asyncFunctionResume@[native code] saveGridLayout@[native code] dispatchEvent@[native code] _triggerEvent@http://192.168.0.13:8111/node_modules/gridstack/dist/gridstack.js:1401:30 _triggerAddEvent@http://192.168.0.13:8111/node_modules/gridstack/dist/gridstack.js:1383:31 makeWidget@http://192.168.0.13:8111/node_modules/gridstack/dist/gridstack.js:968:30 addWidget@http://192.168.0.13:8111/node_modules/gridstack/dist/gridstack.js:388:24 placeWidgetAdder@http://192.168.0.13:8111/reactor/en-ca/lib/js/reactor-ui-status.js:183:44Firefox while updating a rule
@http://192.168.0.13:8111/reactor/en-ca/lib/js/reaction-editor.js:543:91 makeExprMenu@http://192.168.0.13:8111/reactor/en-ca/lib/js/reaction-editor.js:537:28 @http://192.168.0.13:8111/reactor/en-ca/lib/js/reaction-editor.js:92:64 @http://192.168.0.13:8111/reactor/en-ca/lib/js/reaction-editor.js:89:68 each@http://192.168.0.13:8111/node_modules/jquery/dist/jquery.min.js:2:3133 @http://192.168.0.13:8111/reactor/en-ca/lib/js/reaction-editor.js:89:35 @http://192.168.0.13:8111/client/MessageBus.js:98:44 forEach@[native code] @http://192.168.0.13:8111/client/MessageBus.js:95:54 @http://192.168.0.13:8111/client/MessageBus.js:106:44 @http://192.168.0.13:8111/client/Observable.js:78:28 notifySaved@http://192.168.0.13:8111/reactor/en-ca/lib/js/ee.js:82:21 notifySaved@http://192.168.0.13:8111/reactor/en-ca/lib/js/expression-editor.js:47:26 @http://192.168.0.13:8111/reactor/en-ca/lib/js/reactor-ui-rules.js:1460:39 forEach@[native code] @http://192.168.0.13:8111/reactor/en-ca/lib/js/reactor-ui-rules.js:1459:58Chrome while creating/updating an expression
TypeError: Cannot read properties of undefined (reading 'getEditor') at RuleEditor.makeExprMenu (http://192.168.0.13:8111/reactor/en-ca/lib/js/rule-editor.js:1788:86) at Object.handler (http://192.168.0.13:8111/reactor/en-ca/lib/js/rule-editor.js:2174:54) at http://192.168.0.13:8111/client/MessageBus.js:98:44 at Array.forEach (<anonymous>) at MessageBus._sendToBus (http://192.168.0.13:8111/client/MessageBus.js:95:54) at MessageBus.send (http://192.168.0.13:8111/client/MessageBus.js:106:44) at ExpressionEditor.publish (http://192.168.0.13:8111/client/Observable.js:78:28) at ExpressionEditor.signalModified (http://192.168.0.13:8111/reactor/en-ca/lib/js/ee.js:146:14) at ExpressionEditor.signalModified (http://192.168.0.13:8111/reactor/en-ca/lib/js/expression-editor.js:40:15) at ExpressionEditor.reindexExpressions (http://192.168.0.13:8111/reactor/en-ca/lib/js/expression-editor.js:71:18) ``
Thanks to @toggledbits for adding a custom CSS. I've started doing a darker Reactor style.
Here's the file: https://gist.github.com/dbochicchio/825098ac13b7f8cac22012eae37ff7ce
A couple of things are still too bright and I'll eventually catch-up. Just place it under your /config directory, naming the file as customstyles.css. Hard refresh your browser.
Hi
Having to rebuild my Linux Debian box as the SSD failed. And I have forgotten exactly what I did the first time to get it all setup.
I have Debian 12 up and running on the new SSD, I only have console no Desktop GUI.
I am trying to do the bare metal install for MSR. However I am not sure if I am meant to install nodejs whlist logged in as the root user or as the none root user with my name ?
I used putty and connected via SSH and logged in as root and I installed nodejs but I think this was wrong as when logged in as my user name and I do a node -v command it says node is not installed or doesn't show any version number anyway.
But when logged in as root and I do a node -v command it does show me its installed and displays the version number. maybe its a path issue for my username and he can't see node is installed?
So now I am thinking I should of installed node whilst logged in as my user name and not as the root user.
This is how I installed nodejs as whilst logged in as root
ac7bf6c3-23ad-46fc-8ada-44af6704e63e-image.png
Thanks in advance.
Build 21228 has been released. Docker images available from DockerHub as usual, and bare-metal packages here.
Home Assistant up to version 2021.8.6 supported; the online version of the manual will now state the current supported versions; Fix an error in OWMWeatherController that could cause it to stop updating; Unify the approach to entity filtering on all hub interface classes (controllers); this works for device entities only; it may be extended to other entities later; Improve error detail in messages for EzloController during auth phase; Add isRuleSet() and isRuleEnabled() functions to expressions extensions; Implement set action for lock and passage capabilities (makes them more easily scriptable in some cases); Fix a place in the UI where 24-hour time was not being displayed.As the title says, here's my OpenAI Controller for Reactor:
OpenAI Controller per Reactor. Contribute to dbochicchio/reactor-openai development by creating an account on GitHub.
It supports both OpenAI and Azure OpenAI endpoints. You'll need keys/endpoints, according to each service.
The controller supports multiple models, and each one could be mapped as an entity.
It's quite easy to use, and responses can be stored in variables, for easy access. Or sent to another action (Text To Speech, another endpoint, etc).
9013ae50-fd68-42a2-87c3-97479132e465-image.png
80a88eec-7c89-464a-8196-690b4b72d044-image.png
Have fun with LLM into your scenes!
In Home Assistant I have an integration that if I add entities to it, I will get the following error in MSR as certain entity values I'm using in expressions are null for a moment. This is more or less cosmetic issue and happens very rarely as I rarely modify that integration on the hass side.
Screenshot 2024-11-28 at 22.20.41.png
And the expression is
Screenshot 2024-11-28 at 22.38.19.png
Could I "wrap" hass-entity shown above somewhat differently to prevent this error from happening? Using build 24302.
Hello
I am trying to set up Multi System Reactor to automate routines across multiple smart home devices & platforms (e.g., Home Assistant, SmartThings, and Hubitat). While I have successfully linked the systems; I am facing issues with:
-Delays in triggering actions on secondary devices.
-Inconsistent execution of complex logic conditions.
-Synchronization of states between devices when one system updates.
Is there a recommended way to optimize performance & confirm seamless state sharing across systems?
I have checked https://smarthome.community/category/22/multi-system-reactor-msbi guide for reference but still need advice.
Any tips on debugging or log analysis to pinpoint where the issue arises would also be appreciated.
Thank you !
I've managed to use MSR UI on iOS devices to some degree*, so that although UI elements (e.g. rule sets) are not visible in portrait mode, you've seen them in landscape. Now with recents builds (24302) this does not work anymore, elements (rule sets, entities) are not anymore visible in landscape mode.
Does anyone have similar experiences? Using iOS 18 and Safari/Chrome browser.
( *Drag & drop of rule conditions have never worked on a mobile)
@toggledbits Since I have upgraded ZWaveJSController to 24293 from 24257 I am seeing entries related to registering action set_volume, but action is not defined by the capability 143 every time I restart Reactor.
The Siren seems to be doing what it is supposed to do. The volume levels are fine. Should I worry about it?
Reactor version 24302
ZWaveJSController version 24293
Z-Wave JS UI version 9.27.4
zwave-js version 14.3.4
I have the following ACL defined:
groups: admin: users: - admin applications: true api_acls: # This ACL allows users in the "admin" group to access the API - url: "/api" group: admin allow: true log: true # This ACL allows anyone/thing to access the /api/v1/alive API endpoint - url: "/api/v1/alive" allow: trueAnd I have authenticated to MSR as "admin" user. However, I'm getting "access denied" when trying to access http://*******:8111/api/v1/log
So what I'm missing, is my ACL incorrectly defined?
Using build 24302 on Docker.
Hi
I have just connected a bunch of EzloPi controllers to MSR to import some ESP based devices etc.
They all seemed to have worked and imported in to MSR apart from I have one missing device. It is a Digital Gas Sensor device.
This is how that device looks in the Ezlo API.
Devices Info:
_id: "10696001" deviceTypeId: "ezlopi" parentDeviceId: "10696000" category: "level_sensor" subcategory: "" gatewayId: "457a5069" batteryPowered: false name: "Gas Sensor Digital" type: "sensor" reachable: true persistent: true serviceNotification: false armed: false roomId: "" security: "no" ready: true status: "idle" parentRoom: true protectConfig: "default"Items Info:
_id: "20696001" deviceId: "10696001" hasGetter: true hasSetter: false name: "smoke_density" show: true valueType: "substance_amount" scale: "parts_per_million" value: 2.7472610473632812 valueFormatted: "2.75" status: "idle"There is also an Analog Gas sensor that one did import in to MSR OK.
68d63dab-b871-4f44-912b-cf6e0b9eb4c6-image.png
Devices Info:
_id: "10696000" deviceTypeId: "ezlopi" parentDeviceId: "10696000" category: "security_sensor" subcategory: "gas" gatewayId: "457a5069" batteryPowered: false name: "Gas Sensor Analog" type: "sensor" reachable: true persistent: true serviceNotification: false armed: false roomId: "" security: "no" ready: true status: "idle" parentRoom: true protectConfig: "default"Items Info:
_id: "20696000" deviceId: "10696000" hasGetter: true hasSetter: false name: "gas_alarm" show: true valueType: "token" enum: 0: "no_gas" 1: "combustible_gas_detected" 2: "toxic_gas_detected" 3: "unknown" valueFormatted: "no_gas" value: "no_gas" status: "idle"And this is how this MQ2 Gas Sensor looks like on their dashboard:
Digital
cb77dfa3-4af5-4d06-9635-89207a716a89-image.png
Analog
4fb4da1b-e946-4b89-876c-bcd9f5699b6c-image.png
They have an EzloPi website here you can create your own sensor projects using ESP boards, which is very interesting stuff!
And I just wrote on the Ezlo forum here, how to connect an EzloPi controller to MSR.
THANKS.
A couple of things for you @toggledbits, since you mentioned that this release has new features and some tweaks are expected.
Local expressions cannot be deleted. Pushing the X button has no effect for me.
When cloning an entity action, the result is strange (first is cloned one, second is the original action):
a92ea094-9e2c-4aaa-bf47-2d07a6ffdbd0-image.png
When changing the action on the cloned element, the params are added to the original one. See screenshot:
92ac3011-83c8-466b-bd23-47d483ad7a52-image.png
Dark theme has a couple of strange contrasts. One is visible in the previous screenshots (white text on yellow background). Another one is in groups (blue text on blue background):
9b3c4988-53ef-44e6-9672-30e744cacb75-image.png
Overall, I found blue, yellow, red and green (in buttons and forms) to be too bright.
On the bright side:
I love the new script action: thank you! The dark theme is a great start to avoid getting blinded at night I promise I'll try very soon the new features around actions. Thanks!@toggledbits
I just upgraded to version MSR 24293, bare metal running on Fedora. Upon restart, I am getting a error banner:
I followed the new directions about npm
npm i --no-save --no-package-lock --omit dev
Any idea what the issue is?
Seems like switching the UI to the newly added dark mode (thank you for this) does nothing. The UI stays in light mode and only a few buttons turn into dark mode (see screenshot)
Things I have tried:
Hard refresh
Different browser
Different computer
Restarting Reactor
Failed troubleshooting attempts:
No errors in Chrome console
No relevant errors in Reactor log (can still PM the full log file)
Reactor version: latest-24293-ea42a81d
Hardware: Odroid N2+
Linux version: Ubuntu 24.04.1 LTS
3df2806f-9146-485b-9ec1-d056e91cefe5-image.png Dark mode enabled
ff823023-c079-4684-b01f-d6ac6527d31a-image.png Light mode enabled
Good morning,
I have a service MQTT service that needs a restart occasionally. The add-on (Smartbed MQTT) is for the smart bed base for my bed. It has a "safety light" that I can control from HAAS & MSR as a light entity, and also moves the head of the bed to a preset at bedtime, and then lies it back flat in the morning The problem is, from time to time, the light becomes "unavailable" Restarting from the Add-ons tab in HAAS always fixes it, but I should be able to detect when it happens when "light.tempur_pedic_safety_lights" is not true or false, i.e., unavailable.
What I don't know how to do is how to restart that service. Does anybody have experience in restarting add-ons from MSR?
Running:
Reactor (Multi-hub) latest-24212-3ce15e25 ZWaveJSController [0.1.24232]HAAS:
RPi5-64 (8GB) Core 2024.7.3 Supervisor 2024.08.0 Operating System 13.0 Frontend 20240710.0MQTT interface... time for some testing. Where are my experts?
-
@therealdb said in MQTT interface... time for some testing. Where are my experts?:
I hope it’d be possible to use an external broker as well.
It doesn't incorporate a broker so you can use whatever you like. I've just been using
mosquittoon an RPi4. Lots of things available to fulfill that role.I suppose if I ever do a full OS distribution/installer, I'd include one, but I'd still keep it agnostic. I like freedom of choice.
Edit: by the way, some time ago, I had asked Eduard at Vera/Ezlo to include
mosquittoas an installable package for the Vera firmware/OS. I believe it's available to install on the recent 7.32 builds. -
Yep, mosquito is available in 7.32.
I’ve written my own broker because why not, and I’ve bridged my Vera to mqtt using the udp client posted by @akbooer. I’m slowly removing the logic from the Vera because I’ve incorporated a lot of thing into mqtt (Shelly, tasmota, ecovacs, LG tv, cams, notifications, fully kiosk) and I’m already using mqtt as the message bus of my system. I’m really looking forward to test this new feature.
-
Everyone, I'm going to hold off releasing this, not because it isn't ready, but because I'm not ready to handle install issues and questions for it (it's a separate add-on, and has its own all new configuration requirements, of course). The complication is that I'm travelling starting Friday morning on a college preview/visit for my older son, and I really need to give that (and him) my undivided attention.
So, I'll push this out when I return, either Sunday night or Monday morning. Sorry for the delay.
-
OK. MQTTController is now published. A few things to know:
- It's a separate component you need to download and install;
- Instructions for getting it, installing it, and configuring it are here;
- Please make sure your posts and new topics (especially questions and reports of possible bugs) follow the posting guidelines (see pinned post in this category).
-
Working on it, but not in that release.
-
Turns out, you can do it with a workaround for now...
After
source, addoptions, withusernameandpassword, like this:... implementation: MQTTController config: source: "mqtt://127.0.0.1:1883/" options: username: whoever password: whatever -
It's done. It's that. I didn't announce the release, but
initis in 21326 of MQTTController, here: https://reactor.toggledbits.com/download/extras/MQTTController/ -
I have this in my custom template for temperature:
my_tasmota_sensor_temperature: type: ValueSensor capabilities: [temperature_sensor] primary_attribute: temperature_sensor.value init: - topic: "cmnd/%topic%/STATUS" payload: 10 type: raw events: "tele/%topic%/SENSOR": "temperature_sensor.value": expr: 'payload[ source ?? "Global" ]?.Temperature' "temperature_sensor.units": expr: payload.TempUnit "stat/%topic%/STATUS10": "temperature_sensor.value": expr: 'payload.StatusSNS[ source ?? "Global" ]?.Temperature' "temperature_sensor.units": expr: payload.StatusSNS.TempUnitI can't figure out how to use
initto acheive this using the stock template.
I actually updated to 21326 before posting, following the docs for installation/upgrade but the version number in the template file says 21321 and has no notes ofinit -
The template file is not relevant for version number, look at MQTTController.js.
Can you show me the rest of your config for this entity/Tasmota node?
Also you don't need to make a custom template just to add
init. You can use the stock template and putinitin the configuration (e.g. next touses_template). -
Ah, of cource.
For now it's"pooltemp": name: "Pooltemp" topic: "Pooltemp" source: "DS18B20" uses_template: my_tasmota_sensor_temperatureBest guessing I've tried this
"pooltemp": name: "Pooltemp" topic: "Pooltemp" source: "DS18B20" init: - topic: "cmnd/%topic%/STATUS" payload: 10 type: raw uses_template: tasmota_sensor_temperature -
You need to make sure the response to that command actually includes the data you want. I've found that some Tasmota devices return incomplete state on this query. For example, I have a node set up with two relays, and this query does not provide the state of the two relays. The alternate choice, then, is to send
cmnd/%topic%Powerwith no payload, and the node replies with aRESULTtopic and the current state (which the template understands).My guess is this issue is moot, however, if you're using an MQTT broker that supports QoS and retain.
-
I'm really sorry but I'm failing getting this running - It seems to not be able to find the MQTT files on startup. Running in Docker and have created the correct directory structure with files. It can read my edited config yaml files from home/kevin/reactor/config OK. Permissions are OK.
Have a lot of MQTT experience but not so hot on Linux/Docker this was my run command
docker run --name reactor -d --restart on-failure -p 8111:8111 -v /home/kevin/reactor:/var/reactor --mount type=bind,src=/etc/localtime,target=/etc/localtime toggledbits/reactor:latest-generic-amd64I have
[latest-22004]2022-01-07T02:08:16.554Z <Structure:INFO> Structure#1 loading controller interface mqtt (MQTTController) [latest-22004]2022-01-07T02:08:16.560Z <MQTTController:null> Module MQTTController v21361 [latest-22004]2022-01-07T02:08:16.561Z <Controller:CRIT> Controller: failed to load mqtt implementation file:///var/reactor/ext/MQTTController/MQTTController.js: [Error]Error: Cannot find module 'mqtt' Require stack: - /var/reactor/ext/MQTTController/MQTTController.js [latest-22004]2022-01-07T02:08:16.562Z <Controller:CRIT> Error: Cannot find module 'mqtt' Require stack: - /var/reactor/ext/MQTTController/MQTTController.js Error: Cannot find module 'mqtt' Require stack: - /var/reactor/ext/MQTTController/MQTTController.js ... -
Did you just drop it in the folder, or did you go through all the installation steps? The message logged suggests that step 5 wasn't completed.
-
This is what I see when running step5 ./install.sh
Installing dependencies... make: Entering directory '/home/kevin/reactor/ext/MQTTController/node_modules/in otify/build' CXX(target) Release/obj.target/inotify/src/bindings.o In file included from ../src/bindings.cc:2:0: ../src/bindings.h:10:27: error: ‘Handle’ has not been declared static void Initialize(Handle<Object> target); ^~~~~~ ../src/bindings.h:10:33: error: expected ‘,’ or ‘...’ before ‘<’ token static void Initialize(Handle<Object> target); ^ ../src/bindings.cc:11:27: error: variable or field ‘Initialize’ declared void void Inotify::Initialize(Handle<Object> exports) { ^~~~~~ ../src/bindings.cc:11:27: error: ‘Handle’ was not declared in this scope ../src/bindings.cc:11:27: note: suggested alternative: ‘rand_r’ void Inotify::Initialize(Handle<Object> exports) { ^~~~~~ rand_r ../src/bindings.cc:11:40: error: expected primary-expression before ‘>’ token void Inotify::Initialize(Handle<Object> exports) { ^ ../src/bindings.cc:11:42: error: ‘exports’ was not declared in this scope void Inotify::Initialize(Handle<Object> exports) { ^~~~~~~ ../src/bindings.cc: In static member function ‘static Nan::NAN_METHOD_RETURN_TYP E NodeInotify::Inotify::AddWatch(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/bindings.cc:146:43: error: no matching function for call to ‘v8::Value::T oObject()’ Local<Object> args_ = info[0]->ToObject(); ^ In file included from /home/kevin/.cache/node-gyp/12.20.0/include/node/node.h:67 :0, from ../src/node_inotify.h:5, from ../src/bindings.h:4, from ../src/bindings.cc:2: /home/kevin/.cache/node-gyp/12.20.0/include/node/v8.h:2672:44: note: candidate: v8::MaybeLocal<v8::Object> v8::Value::ToObject(v8::Local<v8::Context>) const V8_WARN_UNUSED_RESULT MaybeLocal<Object> ToObject( ^~~~~~~~ /home/kevin/.cache/node-gyp/12.20.0/include/node/v8.h:2672:44: note: candidate expects 1 argument, 0 provided In file included from /home/kevin/.cache/node-gyp/12.20.0/include/node/v8-intern al.h:14:0, from /home/kevin/.cache/node-gyp/12.20.0/include/node/v8.h:27, from /home/kevin/.cache/node-gyp/12.20.0/include/node/node.h:6 , from ../src/node_inotify.h:5, from ../src/bindings.h:4, from ../src/bindings.cc:2: /home/kevin/.cache/node-gyp/12.20.0/include/node/v8.h:2686:31: note: candidate: v8::Local<v8::Object> v8::Value::ToObject(v8::Isolate*) const Local<Object> ToObject(Isolate* isolate) const); ^ /home/kevin/.cache/node-gyp/12.20.0/include/node/v8config.h:328:3: note: in defi nition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ /home/kevin/.cache/node-gyp/12.20.0/include/node/v8.h:2686:31: note: candidate expects 1 argument, 0 provided Local<Object> ToObject(Isolate* isolate) const); ^ /home/kevin/.cache/node-gyp/12.20.0/include/node/v8config.h:328:3: note: in defi nition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ ../src/bindings.cc:149:27: error: no matching function for call to ‘v8::Object:: Has(v8::Local<v8::String>&)’ if (!args_->Has(path_sym)) { ^ In file included from /home/kevin/.cache/node-gyp/12.20.0/include/node/node.h:67 :0, from ../src/node_inotify.h:5, from ../src/bindings.h:4, from ../src/bindings.cc:2: /home/kevin/.cache/node-gyp/12.20.0/include/node/v8.h:3590:37: note: candidate: v8::Maybe<bool> v8::Object::Has(v8::Local<v8::Context>, v8::Local<v8::Value>) V8_WARN_UNUSED_RESULT Maybe<bool> Has(Local<Context> context, ^~~ /home/kevin/.cache/node-gyp/12.20.0/include/node/v8.h:3590:37: note: candidate expects 2 arguments, 1 provided /home/kevin/.cache/node-gyp/12.20.0/include/node/v8.h:3596:37: note: candidate: v8::Maybe<bool> v8::Object::Has(v8::Local<v8::Context>, uint32_t) V8_WARN_UNUSED_RESULT Maybe<bool> Has(Local<Context> context, uint32_t index) ; ^~~ /home/kevin/.cache/node-gyp/12.20.0/include/node/v8.h:3596:37: note: candidate expects 2 arguments, 1 provided ../src/bindings.cc:154:31: error: no matching function for call to ‘v8::Object:: Has(v8::Local<v8::String>&)’ if (!args_->Has(callback_sym) || ^ In file included from /home/kevin/.cache/node-gyp/12.20.0/include/node/node.h:67 :0, from ../src/node_inotify.h:5, from ../src/bindings.h:4, from ../src/bindings.cc:2: /home/kevin/.cache/node-gyp/12.20.0/include/node/v8.h:3590:37: note: candidate: v8::Maybe<bool> v8::Object::Has(v8::Local<v8::Context>, v8::Local<v8::Value>) V8_WARN_UNUSED_RESULT Maybe<bool> Has(Local<Context> context, ^~~ /home/kevin/.cache/node-gyp/12.20.0/include/node/v8.h:3590:37: note: candidate expects 2 arguments, 1 provided /home/kevin/.cache/node-gyp/12.20.0/include/node/v8.h:3596:37: note: candidate: v8::Maybe<bool> v8::Object::Has(v8::Local<v8::Context>, uint32_t) V8_WARN_UNUSED_RESULT Maybe<bool> Has(Local<Context> context, uint32_t index) ; ^~~ /home/kevin/.cache/node-gyp/12.20.0/include/node/v8.h:3596:37: note: candidate expects 2 arguments, 1 provided ../src/bindings.cc:155:28: warning: ‘v8::Local<v8::Value> v8::Object::Get(v8::Lo cal<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declarations] !args_->Get(callback_sym)->IsFunction()) { ^ In file included from /home/kevin/.cache/node-gyp/12.20.0/include/node/v8-intern al.h:14:0, from /home/kevin/.cache/node-gyp/12.20.0/include/node/v8.h:27, from /home/kevin/.cache/node-gyp/12.20.0/include/node/node.h:6 , from ../src/node_inotify.h:5, from ../src/bindings.h:4, from ../src/bindings.cc:2: /home/kevin/.cache/node-gyp/12.20.0/include/node/v8.h:3553:51: note: declared he re V8_DEPRECATED("Use maybe version", Local<Value> Get(Local<Value> key)); ^ /home/kevin/.cache/node-gyp/12.20.0/include/node/v8config.h:328:3: note: in defi nition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ ../src/bindings.cc:160:32: error: no matching function for call to ‘v8::Object:: Has(v8::Local<v8::String>&)’ if (!args_->Has(watch_for_sym)) { ^ In file included from /home/kevin/.cache/node-gyp/12.20.0/include/node/node.h:67 :0, from ../src/node_inotify.h:5, from ../src/bindings.h:4, from ../src/bindings.cc:2: /home/kevin/.cache/node-gyp/12.20.0/include/node/v8.h:3590:37: note: candidate: v8::Maybe<bool> v8::Object::Has(v8::Local<v8::Context>, v8::Local<v8::Value>) V8_WARN_UNUSED_RESULT Maybe<bool> Has(Local<Context> context, ^~~ /home/kevin/.cache/node-gyp/12.20.0/include/node/v8.h:3590:37: note: candidate expects 2 arguments, 1 provided /home/kevin/.cache/node-gyp/12.20.0/include/node/v8.h:3596:37: note: candidate: v8::Maybe<bool> v8::Object::Has(v8::Local<v8::Context>, uint32_t) V8_WARN_UNUSED_RESULT Maybe<bool> Has(Local<Context> context, uint32_t index) ; ^~~ /home/kevin/.cache/node-gyp/12.20.0/include/node/v8.h:3596:37: note: candidate expects 2 arguments, 1 provided ../src/bindings.cc:163:33: warning: ‘v8::Local<v8::Value> v8::Object::Get(v8::Lo cal<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declarations] if (!args_->Get(watch_for_sym)->IsInt32()) { ^ In file included from /home/kevin/.cache/node-gyp/12.20.0/include/node/v8-intern al.h:14:0, from /home/kevin/.cache/node-gyp/12.20.0/include/node/v8.h:27, from /home/kevin/.cache/node-gyp/12.20.0/include/node/node.h:6 , from ../src/node_inotify.h:5, from ../src/bindings.h:4, from ../src/bindings.cc:2: /home/kevin/.cache/node-gyp/12.20.0/include/node/v8.h:3553:51: note: declared he re V8_DEPRECATED("Use maybe version", Local<Value> Get(Local<Value> key)); ^ /home/kevin/.cache/node-gyp/12.20.0/include/node/v8config.h:328:3: note: in defi nition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ ../src/bindings.cc:166:36: warning: ‘v8::Local<v8::Value> v8::Object::Get(v8::Lo cal<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declarations] mask |= args_->Get(watch_for_sym)->Int32Value(); ^ In file included from /home/kevin/.cache/node-gyp/12.20.0/include/node/v8-intern al.h:14:0, from /home/kevin/.cache/node-gyp/12.20.0/include/node/v8.h:27, from /home/kevin/.cache/node-gyp/12.20.0/include/node/node.h:6 , from ../src/node_inotify.h:5, from ../src/bindings.h:4, from ../src/bindings.cc:2: /home/kevin/.cache/node-gyp/12.20.0/include/node/v8.h:3553:51: note: declared he re V8_DEPRECATED("Use maybe version", Local<Value> Get(Local<Value> key)); ^ /home/kevin/.cache/node-gyp/12.20.0/include/node/v8config.h:328:3: note: in defi nition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ ../src/bindings.cc:166:50: error: no matching function for call to ‘v8::Value::I nt32Value()’ mask |= args_->Get(watch_for_sym)->Int32Value(); ^ In file included from /home/kevin/.cache/node-gyp/12.20.0/include/node/node.h:67 :0, from ../src/node_inotify.h:5, from ../src/bindings.h:4, from ../src/bindings.cc:2: /home/kevin/.cache/node-gyp/12.20.0/include/node/v8.h:2709:40: note: candidate: v8::Maybe<int> v8::Value::Int32Value(v8::Local<v8::Context>) const V8_WARN_UNUSED_RESULT Maybe<int32_t> Int32Value(Local<Context> context) const ; ^~~~~~~~~~ /home/kevin/.cache/node-gyp/12.20.0/include/node/v8.h:2709:40: note: candidate expects 1 argument, 0 provided ../src/bindings.cc:172:45: warning: ‘v8::Local<v8::Value> v8::Object::Get(v8::Lo cal<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declarations] String::Utf8Value path(args_->Get(path_sym)); ^ In file included from /home/kevin/.cache/node-gyp/12.20.0/include/node/v8-intern al.h:14:0, from /home/kevin/.cache/node-gyp/12.20.0/include/node/v8.h:27, from /home/kevin/.cache/node-gyp/12.20.0/include/node/node.h:6 , from ../src/node_inotify.h:5, from ../src/bindings.h:4, from ../src/bindings.cc:2: /home/kevin/.cache/node-gyp/12.20.0/include/node/v8.h:3553:51: note: declared he re V8_DEPRECATED("Use maybe version", Local<Value> Get(Local<Value> key)); ^ /home/kevin/.cache/node-gyp/12.20.0/include/node/v8config.h:328:3: note: in defi nition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ ../src/bindings.cc:172:46: error: no matching function for call to ‘v8::String:: Utf8Value::Utf8Value(v8::Local<v8::Value>)’ String::Utf8Value path(args_->Get(path_sym)); ^ In file included from /home/kevin/.cache/node-gyp/12.20.0/include/node/node.h:67 :0, from ../src/node_inotify.h:5, from ../src/bindings.h:4, from ../src/bindings.cc:2: /home/kevin/.cache/node-gyp/12.20.0/include/node/v8.h:3135:5: note: candidate: v 8::String::Utf8Value::Utf8Value(v8::Isolate*, v8::Local<v8::Value>) Utf8Value(Isolate* isolate, Local<v8::Value> obj); ^~~~~~~~~ /home/kevin/.cache/node-gyp/12.20.0/include/node/v8.h:3135:5: note: candidate expects 2 arguments, 1 provided ../src/bindings.cc:182:61: warning: ‘v8::Local<v8::Value> v8::Object::Get(v8::Lo cal<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declarations] inotify->handle()->Set(descriptor, args_->Get(callback_sym)); ^
MQTTController - Reactor - Multi-Hub Automation