openweather plugin ?

[therealdb]

@akbooer speaking of this, are you ok if I release a simple plugin to push data from Veras to openluup UDP? I have one in my system and it’s working flawlessly. I could port it easily. I just need a flag to disable polling from VeraBridge. It’s ok to call Vera’s endpoint to update status.

[akbooer]

Yes, fine with that! So you just need the existing bridge to create the devices, and control them, but use UDP to update them?

I’m doing this with scene controllers myself, at the moment.

[Buxton]

@akbooer No errors in 2021.04.18. Thanks for this as the changes also stabilized my Mosquitto bridge connection, which tended to flop with every error message.

2021-04-18 15:29:04.173   luup.tasmota:262: Topic ignored : tele/power_ServerWork/LWT : Online
2021-04-18 15:29:04.175   luup.tasmota:262: Topic ignored : tele/power_MainVera/LWT : Online
2021-04-18 15:29:04.176   luup.tasmota:262: Topic ignored : tele/power_HAServer/LWT : Online
2021-04-18 15:29:04.177   luup.tasmota:262: Topic ignored : tele/power_SideLandscape/LWT : Online
2021-04-18 15:29:04.178   luup.tasmota:262: Topic ignored : tele/power_GarageVera/LWT : Online

[therealdb]

@akbooer exactly that. I'll call it 'UDP sender' or something better, just to make it publishable on app store and leave it generic.

[akbooer]

@buxton said in openLuup: Tasmota MQTT Bridge:

No errors in 2021.04.18. Thanks for this ...

Thanks to you for excellent description and diagnosis of the problem!

[ArcherS]

@akbooer I am now testing my Tasmota IR Tranceiver with the Tasmota Mqtt Bridge on my test Pi running OpenLuup v21.4.29b.
Link to Tasmota IR documentation.

When looking in the Console the Tasmota sends the following messages when I start it:

00:00:03 MQT: Attempting connection...
00:00:03 MQT: Connected
00:00:03 MQT: tele/TasmotaIR/LWT = Online (retained)
00:00:03 MQT: cmnd/TasmotaIR/POWER = 
00:00:03 MQT: tele/TasmotaIR/INFO1 = {"Module":"Generic","Version":"9.1.0(ir)","FallbackTopic":"cmnd/TasmotaIR_fb/","GroupTopic":"cmnd/tasmotas/"}
00:00:03 MQT: tele/TasmotaIR/INFO2 = {"WebServerMode":"Admin","Hostname":"TasmotaIR-2895","IPAddress":"192.168.1.59"}
00:00:03 MQT: tele/TasmotaIR/INFO3 = {"RestartReason":"Software/System restart"}
00:00:06 QPC: Reset
00:00:07 MQT: tele/TasmotaIR/STATE = {"Time":"1970-01-01T00:00:07","Uptime":"0T00:00:09","UptimeSec":9,"Vcc":3.069,"Heap":25,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":29,"MqttCount":1,"Wifi":{"AP":1,"SSId":"BeachAC","BSSId":"FC:EC:DA:D1:7A:64","Channel":11,"RSSI":66,"Signal":-67,"LinkCount":1,"Downtime":"0T00:00:03"}}

It does however not show up as a Tasmota child device in OpenLuup for some reason.

The idea is to use it for my HVAC, the following message is received when I press a button on the remote:

17:53:29 MQT: tele/TasmotaIR/RESULT = {"IrReceived":{"Protocol":"FUJITSU_AC","Bits":128,"Data":"0x0x1463001010FE0930400400000000206C","Repeat":0,"IRHVAC":{"Vendor":"FUJITSU_AC","Model":1,"Mode":"Heat","Power":"On","Celsius":"On","Temp":20,"FanSpeed":"Auto","SwingV":"Off","SwingH":"Off","Quiet":"Off","Turbo":"Off","Econo":"Off","Light":"Off","Filter":"Off","Clean":"Off","Beep":"Off","Sleep":-1}}}

The other application for a Tasmota IR Tranceiver would be for regular remotes for TVs etc. A message from a regular IR remote (for a cheap Led light) looks like this:

17:56:21 MQT: tele/TasmotaIR/RESULT = {"IrReceived":{"Protocol":"NEC","Bits":0,"Data":"0xFFFFFFFFFFFFFFFF","DataLSB":"0xFFFFFFFFFFFFFFFF","Repeat":1}}

[akbooer]

@ArcherS

Can you try the latest testing branch?

[ArcherS]

@akbooer thanks that worked right away.

The child device is added and the variables are populated as they should.

I tried both the HVAC remote and the led light one and the both seem to report as they should.

Briliant support as always!

[ArcherS]

Next question is how to send Mqtt commands from inside OpenLuup to one of the Tasmota devices?
It is probably quite simple, but I have missed how to do that.

As far as I have found out the Mqtt command for controlling an HVAC is something like:

cmnd/<device_name>/IRhvac {"Vendor":"LG2", "Power":"On","Mode":"Hot","FanSpeed":3,"Temp":22.5}

So far I have only received messages from the Mqtt/Tasmota devices, so not quite sure how to do that.

[akbooer]

@archers

Because there’s infinite variety, I’ve not implemented any command/control from the Tasmota bridge.

I could certainly add a device action to send a generic command with device_name and command parameters, or such like, if that helps.

Edit: the alternative is to publish an MQTT message directly.

[ArcherS]

@akbooer I think that I could try publishing an Mqtt message directly first. A generic command could perhaps also be of use.

The below text is edited after I got it to work by adding \ before the " so that it is passed trough as it should.

I found this:

local mqtt = luup.openLuup.mqtt
mqtt.publish ("My/Topic/Name", "My Application message")

For my simple test this works from Lua Code Test:
cmnd/<device_name>/IrSend/ <rest of the message>
e.g.
luup.openLuup.mqtt.publish ("cmnd/TasmotaIR/IrSend","{\"Protocol\":\"NEC\",\"Bits\":32,\"Data\":\"0x10EF08F7\",\"DataLSB\":\"0x08F710EF\",\"Repeat\":0}")

I will continue to try this for the HVAC, something like this:

cmnd/<device_name>/IRhvac <rest of message>
e.g.
cmnd/TasmotaIR/IrSend/ {\"Vendor\":\"LG2\", \"Power\":\"On\",\"Mode\":\"Hot\",\"FanSpeed\":3,\"Temp\":22.5}

[akbooer]

@archers

Yes, that will work, although two alternatives are available to make the string handling easier...

'{"Vendor":"LG2", "Power":"On", "Mode":"Hot", "FanSpeed":3, "Temp":22.5}'

or

[[{"Vendor":"LG2", "Power":"On", "Mode":"Hot", "FanSpeed":3, "Temp":22.5}]]

[ArcherS]

@akbooer thanks! Yes those do look a bit easier to use, I will try them.

[therealdb]

@archers if you want virtual device, v3 beta of my Virtual Devices can send MQTT messages under openLuup, for attached and supported devices/actions.

[ArcherS]

@therealdb that sounds interesting! I will try that.

Edit: I do not remember; how do I update to the v3 beta for the Virtual Devices plugin? Also I am a bit unsure how I can see the current version.
I typed in "development" in the plugins table and it says "GitHub.development", should that do it?

[therealdb]

@archers just download the files from GitHub or use alt appstore. Version should be visible in logs.

[ArcherS]

@therealdb when looking in github I cannot see the development branch. I can only see the master branch with mqtt, beta2.
Not sure if I am doing something wrong though (quite possible).

In my log it says "VirtualDevices[3.0-beta2@37]".

[therealdb]

@archers you’re good. No development branch, as it’s almost stable and only attached to openluup, since I’ll not update the Vera AppStore soon.

[ArcherS]

@therealdb I created a simple Virtual Binary Switch and it now has three Mqtt variables:
MQTT_BrightnessValue
MQTT_PowerStatusOff
MQTT_PowerStatusOn

I can see the format "topic/=/message" in the instructions, but I am clerarly missing something.
Do I need to define IP address etc in some other variable?

I tried to get it to work, but I do not get it right, no reaction in the Tasmota device console. How do I put e.g. the following into "MQTT_PowerStatusOn", i.e. to get the device to send this when it is powered on?

cmnd/TasmotaIR/IRhvac {"Vendor":"FUJITSU_AC","Model":1,"Mode":"Heat","Power":"On","Celsius":"On","Temp":20,"FanSpeed":"Auto","SwingV":"Off","SwingH":"Off","Quiet":"Off","Turbo":"Off","Econo":"Off","Light":"Off","Filter":"Off","Clean":"Off","Beep":"Off","Sleep":-1}

(Where the TasmotaIR has IP 192.168.1.59)

Sorry for the stupid questions.

[therealdb]

@archers no need to put ip or anything. Just push the mqtt message to the broker. In you case

cmnd/TasmotaIR/IRhvac/=/{"Vendor":"FUJITSU_AC","Model":1,"Mode":"Heat","Power":"On","Celsius":"On","Temp":20,"FanSpeed":"Auto","SwingV":"Off","SwingH":"Off","Quiet":"Off","Turbo":"Off","Econo":"Off","Light":"Off","Filter":"Off","Clean":"Off","Beep":"Off","Sleep":-1}