Reactor-Editor / Reactor-ui-Status Errors

[toggledbits]

I suspect the files on the QNAP have root as the owner. That often happens with docker containers, and if you're just logged in as the pi user trying to copy the files, you'll get those messages. Drag and drop isn't going to get you there. I don't have a QNAP NAS, but if you can ssh into it, do that (log in as yourself). Then...

• Bring yourself up to root sudo su -.
• Navigate (using cd) to the directory above your config, storage, and logs on the QNAP NAS.
• Make an archive file: tar cvf ../reactorconfig.tar .
  This will create the archive file in the directory above your current directory.
• Copy the archive file to the Pi (e.g. into /home/pi)
• Log in on the Pi as pi
• Become root on the Pi: sudo su -
• Go to the directory you created for the Reactor work files (using cd)
• Untar the archive file: tar xvf /home/pi/reactorconfig.tar
• Make your future life easier by making pi the owner of the files (esp. the config files): chown -R pi .
• Exit the root privilege level: exit (you are now user pi again)
• Try starting the docker container (using docker-compose is highly recommended, see install instructions).

[Talisker]

Thanks for the prompt responses guys. I might have to concede on this one and start my reactions again!

On another note. I have installed / configured docker-compose (or at least I thought I had). I don't seem to be able to use it to stop reactor:

pi@raspberrypi:~ $ docker stop reactor
Got permission denied while trying to connect to the Docker daemon socket at unix:///var/run/docker.sock: Post "http://%2Fvar%2Frun%2Fdocker.sock/v1.24/containers/reactor/stop": dial unix /var/run/docker.sock: connect: permission denied
pi@raspberrypi:~ $ cd reactor
pi@raspberrypi:~/reactor $ docker stop reactor
Got permission denied while trying to connect to the Docker daemon socket at unix:///var/run/docker.sock: Post "http://%2Fvar%2Frun%2Fdocker.sock/v1.24/containers/reactor/stop": dial unix /var/run/docker.sock: connect: permission denied
pi@raspberrypi:~/reactor $ dir
config docker-compose.yml logs storage
pi@raspberrypi:~/reactor $ ^C
pi@raspberrypi:~/reactor $ sudo docker stop reactor
reactor
pi@raspberrypi:~/reactor $ docker-compose down
ERROR: Couldn't connect to Docker daemon at http+docker://localhost - is it running?

If it's at a non-standard location, specify the URL with the DOCKER_HOST environment variable.
pi@raspberrypi:~/reactor $

[CatmanV2]

I should probably leave this to @toggledbits but what does

su docker stop reactor

do?

C

[Talisker]

pi@raspberrypi:~/reactor $ su docker stop reactor
su: user docker does not exist or the user entry does not contain all the required fields

[CatmanV2]

Oh sorry!

sudo docker stop reactor

DOH

C

[Talisker]

@catmanv2 I tried that thanks and it works:

sudo docker stop reactor #stops reactor
sudo service docker restart #starts reactor

Cheers!

[Talisker]

@toggledbits thanks for the methodology. I manged to copy the files from a usb stick to the relevant folders using the sudo cp command. Feeling pretty pleased as I am now up an running on my raspberry pi.

[toggledbits]

Just add the pi user to the docker group on the Pi, and you won't have to sudo to use the docker or docker-compose commands.

# Run this command as user `pi`:
sudo usermod -a -G docker pi

Going forward, you should do everything related to the process (container) via docker-compose. You should rarely need or use the docker command itself.

[Talisker]

@toggledbits something is not working quite right with my docker install (docker-compose). Not sure where to start!

[toggledbits]

Can you post your compose file? Also, I assume you ran the docker-compose command while in the same directory as the compose file? Did you start it with docker-compose? If not, you're probably going to get errors like this trying to stop it with docker-compose... the two commands are not interchangeable (for start/stop).

[Talisker]

Sorry @toggledbits . I tied it again after a good break and it appears to work fine. I honestly don't know what was going wrong but things seem to now be in order:

pi@raspberrypi:~ $ cd reactor
pi@raspberrypi:~/reactor $ ls
config docker-compose.yml logs storage
pi@raspberrypi:~/reactor $ docker-compose down
Stopping reactor ... done
Removing reactor ... done
Removing network reactor_default
pi@raspberrypi:~/reactor $ docker-compose pull
Pulling reactor ... done
pi@raspberrypi:~/reactor $ docker-compose up -d
Creating network "reactor_default" with the default driver
Creating reactor ... done

docker-compose.yml below FYI:

Multi-System Reactor template docker-compose.yml (version 22160)

Change the lines indicated by "DO"...

version: '3'

services:
reactor:
container_name: reactor
environment:
# DO change the TZ: line to set your local time zone.
# See valid TZ list: https://en.wikipedia.org/wiki/List_of_tz_database_time_zones
TZ: GB
#
# DO NOT change this path. Your directory location is in "source" below.
REACTOR_DATA_PREFIX: /var/reactor

# DO change the image below to the one you are using (e.g. armv7l or aarch64 for RPi 4)
image: toggledbits/reactor:latest-aarch64

restart: "always"
expose:
  - 8111
ports:
  - 8111:8111
volumes:
    # DO change the /home/username/reactor below to the directory you created for
    # your local data; DO NOT change the /var/reactor part
  - /home/pi/reactor:/var/reactor
  - /etc/localtime:/etc/localtime:ro
tmpfs: /tmp