Navigation

    Discussion Forum to share and further the development of home control and automation, independent of platforms.

    SmartHome Community

    • Register
    • Login
    • Search
    • Categories
    • Recent
    • Tags
    • Popular
    • Unsolved
    (Last Updated: July 21, 2021)
    • Call Service Automation Trigger not Working

      Pabla

      Been trying to call the service automation:trigger to trigger an automation on my HA. Below is the screenshot of the reaction but every time I hit the play button to test it nothing happens. I called the service locally on HA and it worked fine. MSR latest-22203-d7cd6357 and HA 2022.8.3. No errors in HASS logs or Reactor logs. 715cd920-effd-4d31-8ac3-ba34ef29185c-image.png

      Multi-System Reactor
    • TTS in MSR?

      F

      Hi!

      In Home Assistant I sometimes uses the TTS, either to my Sonos or Google speakers. With reactor in Vera I also use TTS.
      But in MSR I can't select the TTS-service. It's simply not there. Am I missing something, or is this the case, so far?
      Thanks!
      /Fanan

      Multi-System Reactor
    • "changes from" operator stops to detect change

      tunnus

      I have the following rule:

      Screenshot 2022-08-09 at 17.33.39.png

      Use this to detect errors in Nibe uplink service, and every time updated data is fetched, a timestamp is stored. This triggered already yesterday, but re-triggered as I tried to manually recover this rule with a reset (hence there's no original "true as of xxx" time).

      So as a clarification, service works now and timestamps are updated, but this rule does not "recover" (stays triggered / SET). Did also restart MSR during this situation, though it was not related to this.

      The condition where there was no change (and rule was working correctly) lasted over 24 hours.

      Running MSR 22179 on Synology Docker. Can PM relevant logs if needed.

      Multi-System Reactor
    • Parsing the output of http request

      tunnus

      I'd like to extract a specific part of a response to http request, in this case of link https://www.nibeuplink.com/Welcome#service_message. If there's something in "service_message" I'd store it & send using Telegram.

      I reckon I'd have to use something similar as in this thread?

      Multi-System Reactor
    • How Does MSR Handle New/Deleted Entities

      Pabla

      Deleted some entities from HA and added some new ones but MSR is still showing the old ones and not all of the new ones. I restarted MSR and it hasn't changed, is there anyway to manually discover new entities and delete the old ones? Most of the new entities have shown up but a few haven't, however none of the deleted entities were removed from MSR.

      I checked the core.entity_registry in HA and none of the entities that are shown in MSR are there.

      Edit: I see the delete option under the entities tab in MSR, is that the only way to delete them?

      Multi-System Reactor
    • Troubles Running MSR as a Service

      Pabla

      Successfully got MSR to run on a VM running Ubuntu 22.04 but am running into an issue with getting to run MSR as a service. Here is what my reactor.service file looks like below.

      However when I go to run the service I see this error: reactor.service: Failed at step CHDIR spawning /usr/bin/node: No such file or directory. Checked and the node file exists in this directory. Kinda stuck at this point, probably a simple fix but I am way in over my head 😰

      [Service] Type=simple User=armans2 WorkingDirectory=/home/reactor Environment=/home/reactor ExecStart=/usr/bin/node app -p Restart=on-failure RestartSec=5s
      Multi-System Reactor
    • MSR actions aren't running anymore-- can't find what's broken

      A

      Hey crew,
      I'm running into an issue where MSR's reactions aren't successfully running, and I can't figure out what's gone wrong.

      Backstory-- we had a big thunderstorm roll through the other day, we lost internet and the storm got bad so I unplugged most items in my homelab, including the Pi that's running MSR.

      Now that everything is powered back up, the reactions aren't running correctly. Most of my MSR automations are to use motion sensors to turn lights on/off, and I immediately noticed that even when a motion sensor is tripped, the light doesn't turn on like it's supposed to.

      I've tested a bunch of things to see what's broken, here's what I've observed:
      -I can successfully flip lights on/off manually within Vera
      -I can successfully flip lights on/off manually within MSR's Entities section
      -the motion motion sensors are correctly reporting to Vera and MSR (I can see when they're sensing motion)
      -the rules within MSR are working correctly, I can see when they flip to 'true' when I walk by a motion sensor
      -I can successfully run the Reaction within MSR (by hitting the 'play' button)

      But for whatever reason, when everything needs to work together, it doesn't successfully run the action. IE: the motion sensor trips, reports it to MSR, I can see MSR going "true" but the light does not turn on. Open to any suggestions, thank you!

      SYSTEM
      Vera has all my devices
      MSR is running bare metal on Rpi "Reactor (Multi-hub) stable-22004-6d6c6b7"

      Multi-System Reactor
    • Evaluation of time() comparisons

      CatmanV2

      Apologies in advance, I expect I am going to make a total pig's ear of explaining, so please bear with me....
      (and if it's in the manual, just tell me to read the manual)

      Going back to my heating scenario:
      We have an alarm clock that goes off at a variable time.
      We want the heating to go off at a time before that (1 hour)
      so we have created the rule set as below:
      Screenshot 2022-07-28 at 16.40.13.png

      So if current time is >= to the HeatTime, the first condition goes true.
      The second condition is to ensure that nothing (tries to) turn(s) the heating off during that 1 hour window
      The interval is there because in Reactor there was precisely that to (from memory) 'make sure the variables updated'
      In the current state it kind of works. There is no Reset action, so the heat goes on once every 15 minutes during that hour.
      In Reactor I didn't have to include the interval in the rule set. It was a stand alone rule as here:
      Screenshot 2022-07-28 at 16.47.23.png

      If I move the Interval condition out of the rule set in MSR, things do not update as time changes (and the rule never sets)

      So I guess the question I'm trying to ask it 'what causes expressions like
      time() >= HeatTime

      To be evaluated, and is there a better way than I've done here?

      Apologies again 😞

      C

      Multi-System Reactor
    • [SOLVED] FetchError: network timeout for API calls

      G

      I've been running into an issue with a couple APIs wherein they return the error FetchError: network timeout....

      A retry resolves but my ask here is around how I can monitor within MSR and trigger (at least) a notification if not a retry after a short delay.

      Multi-System Reactor
    • Vera -> HASS Migration Strategy (question)

      T

      Hi All -

      I'm currently working through a slow migration from Vera to Home Assistant with MSR being a pivotal piece of the equation.

      I have begun the effort of moving some ZWave devices as well (from Vera to HA). Unlike others that use Vera for the ZWave radio, I'm looking to completely remove it from my ecosystem, eventually.

      My issue is I have some Vera Scenes that are designed to be manually executed by the Vera Mobile app. Examples: "Go to Sleep", "Panic - Lights On", etc (Wife Acceptance Factor)

      I think MSR is the right place for any new "Scene" (including manual scenes); and from my reading, a Global Reaction makes sense.

      Question 1: Can anyone recommend a way to execute a Global Reaction from a Vera scene? I've seen some examples of HTTP calls to MSR so I assume this is it (perhaps custom Luup which I know very little about).

      Question 2: How can I (manually) execute this Reaction from Home Assistant? I'm slowly building out my custom Dashboard using "Mushroom".

      Or, maybe there's a better way. Always open to constructive criticism.

      Thanks.

      Multi-System Reactor
    • MSR setup for http request (today's date)

      T

      I would like to extract the daily gas price from my fuel supplier's API. The http call is as follows: https://octopus.energy/api/v1/tracker/G-1R-SILVER-2017-1-M/daily/past/90/1/

      I need to pick the current (i.e. today's) gas price. If I search through the text manually I can find today's data, in this case 2022-07-20.

      Can I set MSR up to do a http request and then extract the "unit_rate" into a variable so that I can set another rule up to determine if it would be cheaper to heat my hot water using the immersion heater or gas (FYI my off peak electricity price is £0.075 per kwh). Any help or guidance as always is much appreciated.

      I'm running MSR on raspberry PI 4 in docker version 22168

      Thanks.

      { "date": "2022-07-20", "market_index": 62.8463, "cost": 15.094631164947945, "standing_charge": 15.0885, "unit_rate": 8.211, "usage": 0.0007467013698630137, "unit_charge": 0.0061311649479452055, "breakdown": { "unit_charge": { "Wholesale cost": 6.28463, "Environmental & social obligations": 0.0, "Delivery & networks": 0.9681, "100% green": 0.0, "Administration, financing & margin": 0.56727, "VAT": 0.391 },`
      Multi-System Reactor
    • Reactor (Multi-System/Multi-Hub) Announcements

      toggledbits

      Build 21228 has been released. Docker images available from DockerHub as usual, and bare-metal packages here.

      Home Assistant up to version 2021.8.6 supported; the online version of the manual will now state the current supported versions; Fix an error in OWMWeatherController that could cause it to stop updating; Unify the approach to entity filtering on all hub interface classes (controllers); this works for device entities only; it may be extended to other entities later; Improve error detail in messages for EzloController during auth phase; Add isRuleSet() and isRuleEnabled() functions to expressions extensions; Implement set action for lock and passage capabilities (makes them more easily scriptable in some cases); Fix a place in the UI where 24-hour time was not being displayed.
      Multi-System Reactor
    • Variables for fun and profit

      CatmanV2

      Well the use of expressions in my Idiot Question over there has opened many new and exciting doors which I am itching to run through. This one has slammed in myu face 😞

      So in reactor we have an expression:
      getstate( 46, "urn:upnp-org:serviceId:VClock1", "AlarmTime" )
      which returns
      Last result: "05:15:00"
      Then we convert this to time one hour earlier:
      time(AlarmTime) - 3600
      which returns
      Last result: 1658373300

      Cool!

      In MSR:
      getstate is not supported
      getEntity("vera>AlarmClock").attributes.x_vera_svc_upnp_org_VClock1.AlarmTime
      Returns:
      Last value: (string) "05:15:00"
      Marvellous!
      time (AlarmTime)
      Returns
      Last value: (null) null

      Boo! Hiss!

      OK seriously, is there a reference I've missed or somewhere I can look at this stuff. time() in Lua returns the epoch time which is fab, but what's my equivalent to the time usage in Reactor?

      TIA
      C

      Multi-System Reactor
    • Idiot questions. Feel free to ignore.

      CatmanV2

      Starting to (very slowly) migrate and improve some of my automation from Reactor to the fabulous MSR. Couple of questions which are probably really obvious but, well, you know me 😞

      Is it possible to repeat an action from a set rule? i.e. if the rule remains triggered for an hour, re-run the set reaction. And to continue re-running that every hour until the rule is reset?

      Sorry if it's really stupid.

      C

      Multi-System Reactor
    • Using duration of a rule or trigger in an expression

      D

      Hi, I have a rule that I have been using in the Vera version of Reactor for a number of years and I am trying to recreate it in MSR and need some advice. The rule monitors the state of our garage door and sends a regular alert if the door has been open for a period of time. The alert contains a variable/expression that provides the duration in minutes the door has been open - eg the end notification looks like this: "The door has been open for X minutes"

      I have everything working OK in MSR except for constructing the expression to provide the duration the door has been open. In Reactor I was using the 'getstate' function in an expression to get the runtime of the rule and then converting that to minutes and passing it to the notify action.

      In MSR I can't work out how to get any info from a rule within an expression.

      The trigger is a simple pulse every X minutes so I was hoping it would be possible to just get the duration of either the rule or the time the door has been open. In the documentation there is a lot of info on getting details of entities, but I couldn't find anything on getting the status of the rules within MSR as it doesn't look like they show up as entities? I hope I didn't miss that part of the doco.

      I did a bit of searching but couldn't find any discussion on getting this type of info so I'm hoping someone will be able to point me in the right direction.

      I'm using build 22179 on Docker and the devices are currently in Vera but I am likely to move them to HASS at some point.

      Multi-System Reactor
    • Adding remotes, scene controllers as entities to MSR

      A

      EDIT: 2022.07.01

      So I will try to remake this thread to some kind of guide for future use, or in worst case a documentation of my failure. At least that could also be useful for letting someone know what didn't work...
      I have zero knowledge of programming, so every time I need to edit a config file in HomeAssistant or similar it requires a good portion of googletime and read, re-reading instructions.
      Also is english not my native language, so bear with me.

      Two goals!
      1: Get MSR to take notice (and then actions of course) of pressed buttons on remotes.
      2: Document what I do in hope I can help someone else in the future.

      I will use a Fibaro Keyfob as described below, but what I understand from Togglebits answers most type of remotes should work in similar ways.

      Original thread:
      Fibaro Keyfob support in MSR? (thru Hassio & Z-wave JS)
      Hi

      I just bought a Fibaro Keyfob FGKF-601 and plan to give this to my son so he can control some stuff in his own room. Primary some lightning and Sonos, maybe blinds in the future.

      As the noob I am it will, of course, not work as I expected.👶🏻

      The remote handle 1x, 2x, 3x clicks per button (six of them) and "release button"
      I thought that it would appear like some "scene controller" in HA and that I could make Rules in MSR depending on what scene-entety that was triggered.
      So is not the case, and if that is because of HA, Z-wave JS or MSR I have no idea.
      I found a HA Blueprint that works in HA, but of course I would prefer to keep all automation in MSR.
      I guess a workaround could be using HA virtual switches "Helpers" that I suppose will come up as an on/off trigger in MSR, but before going this way I would like to check with the wisdom of your guys if there is a better way of doing this.

      I am using:
      MSR 22168 on windows.
      Home Assistant Core 2022.6.7
      Home Assistant Supervisor 2022.05.3
      Home Assistant OS 7.6
      Z-Wave JS version: 0.1.64

      Multi-System Reactor
    • Constraints under triggers or under constraints, what is the difference?

      A

      Need to ask, have thougth about this since the move from Rector to MSR I think.

      What is the difference between putting constraints under trigger groups, like this
      23b4a249-3292-41cd-9927-7f49c9bf1d07-image.png

      Compared to this similar rule, but the time limits is under contraints instead?
      ee596c9f-f52b-4a39-9605-f5932f3d9ed5-image.png

      I think the Constraints parts in manual is still to be done because I can only find in the chapter menu, but it is not mentioned anywhere else.

      Multi-System Reactor
    • The Home Remote with MSR

      MikeReadington

      Did anyone do/start any work on a full integration with The Home Remote application yet?

      Multi-System Reactor
    • Condition must occur after -restriction not working

      tunnus

      Running MSR 22123 in Docker container and trying to use "condition must occur after" option. Will update to the latest build and log a PR if needed, but wanted to poll first if anyone is using this option successfully?

      I have the following rules:

      Screenshot 2022-06-28 at 15.18.50.png

      Notification activity connected to "Alarm disabled" rule did not trigger. I also did another test with quite simple rules and that didn't work either (FWIIW - when observing that test in "real-time", I didn't see any timer running on the second rule while the first rule was true).

      As said, before going further with debug/logs, nice to know if someone is using this option/restriction (successfully).

      Multi-System Reactor
    For those who registered but didn't received the confirmation email, please send an email to support@smarthome.community with the email you used

    Ezlo device capabilities

    Multi-System Reactor
    3
    31
    281
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Elcid
      Elcid last edited by

      Having gotten the Ezlo controller to connect I see these device items
      x_ezlo_item.learn_ir_code=0
      x_ezlo_item.learn_rf_code=0
      x_ezlo_item.send_ir_code=""
      x_ezlo_item.send_rf_code=""

      But they are not listed in the capabilities. It would be nice if to send Ir and Rf codes direct from MSR.

      If possible couild you add this feature.

      1 Reply Last reply Reply Quote 0
      • toggledbits
        toggledbits last edited by

        You would have to explain to me how they work (e.g. what the parameters mean, etc.), since I don't have these devices (I noted from our other discussion that it's a Broadlink device), and eZLO's documentation does not cover these items (not even a mention).

        Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

        1 Reply Last reply Reply Quote 0
        • Elcid
          Elcid last edited by

          And there is the rub.
          As far as i know the ir/rf codes are stored on the ezlo as base64 encoded strings. I presume that the code would be sent as a value with one of those two item.send parameters, th broadlink would then broadcast the ir/rf . I would ask Ezlo, but i am one of the banned people.

          I believe the broadlink device is a plugin developed by Ezlo.

          If i find out more i will let you know. As you say you can not work miracles.

          Maybe some one who is not banned can ask over at Ezlo what the parameters accepts and if it is open for use.

          1 Reply Last reply Reply Quote 0
          • toggledbits
            toggledbits last edited by

            I'm not yet banned, but probably have one foot in their forums and the other on a banana peel, so I'll try and see what response I get.

            Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

            1 Reply Last reply Reply Quote 0
            • toggledbits
              toggledbits last edited by toggledbits

              Well this is classic Vera/eZLO. Support appears to have no idea that this device is recognized: https://community.ezlo.com/t/broadlink-ir-what-do-these-items-mean-do/217834/2?u=rigpapa

              @Elcid This is not bridged from a Vera or anything like that, right? You specifically added this device to your eZLO as a first-class, directly-supported device? Just confirming before I go back and disagree with Oscar's assertion.

              Edit: Yeah, I see it listed in the VeraMobile app. Sheesh. Here we go...

              Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

              1 Reply Last reply Reply Quote 0
              • Elcid
                Elcid last edited by

                Yes defiantly added via the Ezlo/vera app.

                Just read the thread. Seems the usual lefthand not knowing righthand scenario.

                Cheers for posing the question though. May be it will get a response that will help from Oleh.

                1 Reply Last reply Reply Quote 1
                • CatmanV2
                  CatmanV2 last edited by

                  So happy to be out of it!

                  C

                  The Ex-Vera abuser know as CatmanV2.....

                  1 Reply Last reply Reply Quote 1
                  • Elcid
                    Elcid last edited by Elcid

                    I see Oleh has responded

                    i tested the the hub.item.value.set with the below command and was able to turn on /off the ir device, i also tested a rf device and all works.

                    {
                      "method": "hub.item.value.set",
                      "id": "1626604139112",
                      "params": {
                        "_id": "6093b3b9122335171491d136",
                        "value": "JgBwAAABJ5UQFREUEBURFBAVEBQSFBAVDzoSOBE4ETkROREUEDoQORAWETcRFQ8XDxUQFRAVEBUOOxITEDoROBE5EDoROBE5EAAFQQABJ0wQAAxLAAEnSxEADEsAASZMEQAMSwABJkwRAAxKAAEmTBEADQUAAAAAAAAAAA=="
                      }
                    }
                    

                    I was also able to turn on ir/rf learning with the below api request

                    {
                      "method": "hub.item.value.set",
                      "id": "1626604956393",
                      "params": {
                        "_id": "60a35a31122335171b85b751",
                        "value": 1
                      }
                    }
                    

                    this is the broadcast response after a ir signal is sent to broadlink in learning mode.

                    {
                      "id": "ui_broadcast",
                      "msg_id": "60f4346b122335125b847786",
                      "msg_subclass": "hub.extensions.plugin.ui_broadcast",
                      "result": {
                        "code": "JgBYAAABLJUSFBIUERQUEhMTERURORMTETkSORI5EzgRORI5FBISOREVERQTExE5FBITExEUFBITOBM3EjkSFBI5EjgSORI5EgAFLQABK0sSAAx3AAErSxIADQU=",
                        "plugin": "broadlink",
                        "type": "IR"
                      }
                    }
                    

                    each ir/rf command has a different _id that is listed in hub.items.list

                    1 Reply Last reply Reply Quote 0
                    • toggledbits
                      toggledbits last edited by

                      Unfortunately there's nothing in the broadcast that ties it back to the original request, so that's going to eliminate the possibility of storing any broadcast response on the correct item/device. I've asked Oleh about this.

                      Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                      1 Reply Last reply Reply Quote 0
                      • Elcid
                        Elcid last edited by

                        Capturing the learnt rf/ir codes would be enough, it would remove the need to fire up the ezlo/vera App to capture codes. Maybe actions to learn_ir/rf_code and an ezlo broadcast listener in the tool section?

                        toggledbits 1 Reply Last reply Reply Quote 0
                        • toggledbits
                          toggledbits @Elcid last edited by

                          @elcid said in Ezlo device capabilities:

                          Capturing the learnt rf/ir codes would be enough,

                          Yup, that's the part I can't do correctly without connecting data.

                          Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                          1 Reply Last reply Reply Quote 0
                          • Elcid
                            Elcid last edited by

                            Ok we will see what Oleh has to say.
                            here is complete broadcast respnonse
                            1 send "learn_ir_code" _id with hub.item.value.set
                            2 after broadlink learns ir code.
                            3 when learn_ir_code resets to 0

                            3-
                              {
                                "date": 1626635249558,
                                "data": {
                                  "id": "ui_broadcast",
                                  "msg_id": "60f47bf1122335125b847819",
                                  "msg_subclass": "hub.item.updated",
                                  "result": {
                                    "_id": "6059aab5122335123a08b974",
                                    "deviceCategory": "ir_tx",
                                    "deviceId": "6059aab5122335123a08b973",
                                    "deviceName": "RM pro lounge",
                                    "deviceSubcategory": "irt",
                                    "name": "learn_ir_code",
                                    "notifications": [],
                                    "roomName": "lounge",
                                    "serviceNotification": true,
                                    "syncNotification": false,
                                    "userNotification": false,
                                    "value": 0,
                                    "valueFormatted": "0",
                                    "valueType": "int"
                                  }
                                }
                              }
                            
                            2-
                              {
                                "date": 1626635249517,
                                "data": {
                                  "id": "ui_broadcast",
                                  "msg_id": "60f47bf1122335125b847818",
                                  "msg_subclass": "hub.extensions.plugin.ui_broadcast",
                                  "result": {
                                    "code": "JgBQAAABLJUVERQSFBEUEhQSFBEUNxQSFDcUNxM3FDcUNxQ3FBITNxQ3FBIUNxMSFBIUEhQRFBIUEhQ3ExIUNxQ3FDcUNxM3FAAFLQABLUkUAA0FAAAAAAAAAAA=",
                                    "plugin": "broadlink",
                                    "type": "IR"
                                  }
                                }
                              }
                            
                            1-
                              {
                                "date": 1626635244363,
                                "data": {
                                  "id": "ui_broadcast",
                                  "msg_id": "60f47bec122335125b847817",
                                  "msg_subclass": "hub.item.updated",
                                  "result": {
                                    "_id": "6059aab5122335123a08b974",
                                    "deviceCategory": "ir_tx",
                                    "deviceId": "6059aab5122335123a08b973",
                                    "deviceName": "RM pro lounge",
                                    "deviceSubcategory": "irt",
                                    "name": "learn_ir_code",
                                    "notifications": [],
                                    "roomName": "lounge",
                                    "serviceNotification": true,
                                    "syncNotification": false,
                                    "userNotification": false,
                                    "value": 1,
                                    "valueFormatted": "1",
                                    "valueType": "int"
                                  }
                                }
                              }
                            
                            
                            1 Reply Last reply Reply Quote 0
                            • toggledbits
                              toggledbits last edited by

                              This is not the broadcast response we need, though. This is the one that resets the item back to 0 when the learn stops. A successful learn causes two broadcasts: this one to announce that the device has stopped learning, and a separate one to announce what was learned. It's that second broadcast that is missing the IDs we would need to tie it back to either the item or the device.

                              Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                              1 Reply Last reply Reply Quote 0
                              • Elcid
                                Elcid last edited by

                                Yes i understand that, I was just adding the full sequence for clarity.

                                1 Reply Last reply Reply Quote 1
                                • Elcid
                                  Elcid last edited by

                                  Just to report, the hub.item.value.set in msr 1.0 is working fine. I can send ir/rf codes, and initiate a rf/ir learn mode, i just have to listen for broadcasts to pick up the codes and copy and paste into msr.
                                  P.s. congrats on the release of 1.0 and thank you.

                                  1 Reply Last reply Reply Quote 0
                                  • toggledbits
                                    toggledbits last edited by toggledbits

                                    You should also be able to use remote.send_codes. The format of the code data can either be a base64 string (in the format base64:datadatadata), or a list of byte values as decimal or hex values separated by spaces or commas (e.g. 0x00 0x12 0x2a 0xfe 0x14 for hex, 0 18 42 254 20 for decimal, and mixing is OK).

                                    Should it support Pronto?

                                    Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                                    Elcid 1 Reply Last reply Reply Quote 0
                                    • Elcid
                                      Elcid @toggledbits last edited by Elcid

                                      @toggledbits remote.send_code has no input field.
                                      Screenshot_20210720-001609.png

                                      As shown in above image

                                      1 Reply Last reply Reply Quote 0
                                      • toggledbits
                                        toggledbits last edited by toggledbits

                                        Whoops! I'll have that fixed in the next build. Remind me what package you are using (docker or bare metal, RPi, Linux, Windows?)

                                        Edit: And the builds are up (latest).

                                        Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                                        1 Reply Last reply Reply Quote 0
                                        • Elcid
                                          Elcid last edited by Elcid

                                          no luck with remote.send_codes with format base64:JgBYAAABJ5UQFBITERQRFBEUEBURExIUEDkRORE4ETkRORETEjkQORE4EjkQFBEUERQRFBEUEBURExITETkSOBE4ETkRORE4EQAFPwABJ0sRAAxHAAEnSxEADQU=
                                          build reactor-latest-21200-17fb925.tar.gz

                                          1 Reply Last reply Reply Quote 0
                                          • toggledbits
                                            toggledbits last edited by

                                            OK. Got your log file; thanks for that. Found the issue, will be fixed in today's "latest" build (21201).

                                            Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post

                                            Welcome. If you’d like to participate in the discussion, rather than just read, then you can join the forum. As a member, you can interact with others here to share your experience and ask the questions you need answered.

                                            Powered by NodeBB | Contributors
                                            Hosted freely by PointPub Media Communications Inc. | Contact us