Reactor-Editor / Reactor-ui-Status Errors

[Andr]

Seems to work like a charm

Started out with a few rules to let him control a Sonos in his room.
This one is for starting his favorite playlist, when it not is bedtime and that playlist isn't already playing.

[christian_fabre]

Thanks ...
I followed this post and managed to successfully use my HANK SCN04 remote with Reactor and Home Assistant.

[Andr]

@christian_fabre
Happy to hear that it come to use (and that myself learned a few things on the way)

[toggledbits]

@andr said in Adding remotes, scene controllers as entities to MSR:

In that case if I had such uniq string to map to MSR command 'triple' I could skip the filtering in event section?

No. You must filter. If you don't, every incoming event then causes the response section to act and will likely cause spurious changes of the entity data.

[apocalypsehobby]

@christian_fabre said in Adding remotes, scene controllers as entities to MSR:

Thanks ...
I followed this post and managed to successfully use my HANK SCN04 remote with Reactor and Home Assistant.

@christian_fabre Do you mind sharing the code you used? I have two of the HANK SCN04 as well, and am trying to do the same thing

[toggledbits]

I believe that the following is a cleaned-up version of the final code (that which @Andr posted above is not indented properly as shown in these forums and won't work directly, so please use this instead):

controllers:
  - id: hass
    implementation: HassController
    enabled: true
    name: Home Assistant
    config:
      source: 'ws://192.168.0.nnn:8123'
      # The lines above are a guide for indenting only, DO NOT COPY.
      # --- Start copy/paste from below this line ---
      event_targets: 
        "hank_XXX_btn_1": 
          name: "Hank XXX Button 1"
          capabilities: 
            - button
          events: 
            - event: 
                event_type: zwave_js_value_notification
                data: 
                  node_id: XXX  # Put your ZWaveJS node ID here
                  property: scene
                  property_key: "001"  #  001=button 1, 002=button 2, etc.
              response: 
                button.since: 
                  from: event.context.id
                button.state: 
                  from: event.data.value
                  map: 
                    KeyHeldDown: hold
                    KeyPressed: single
                    KeyPressed2x: double
                    KeyPressed3x: triple
                    KeyReleased: release
        "hank_XXX_btn_2": 
          name: "Hank XXX Button 2"
          capabilities: 
            - button
          events: 
            - event: 
                event_type: zwave_js_value_notification
                data: 
                  node_id: XXX  # Put your ZWaveJS node ID here
                  property: scene
                  property_key: "002"  #  001=button 1, 002=button 2, etc.
              response: 
                button.since: 
                  from: event.context.id
                button.state: 
                  from: event.data.value
                  map: 
                    KeyHeldDown: hold
                    KeyPressed: single
                    KeyPressed2x: double
                    KeyPressed3x: triple
                    KeyReleased: release

You need to copy the lines beginning with event_targets: to the end, and paste them into the config section of the controllers entry for your HassController instance. You should change all instances of XXX to the ZWave node ID of your Hank controller. This will give you buttons 1 and 2. To add buttons 3 and 4, just copy-paste either button 1 or button 2 and modify the button number (property_key), entity name, and entity ID. One Reactor entity is created for each button you configure.

If you are not well-versed in editing YAML, I suggest you make a backup copy of your config directory before making any changes.

[christian_fabre]

# If you have more than one of any type of controller, just copy the section for controller type
# and give it new (unique) "id". There is no limit on the number of controllers.
controllers:

  - id: hass
    enabled: true
    implementation: HassController
    name: A Home Assistant system
    config:
      source: 'wss://XX.XX.XX.XX:8123'
      access_token: "YYYYYYYYY"
      #
      event_targets:    # this section starts the event-receiving entities
              "Hank_SCN04_bp1":      # Assign an ID to your entity; each entity must have a unique ID
               name: Hank_bp1   # This is optional but recommended, so you have a friendly name
               capabilities: ['button']  # define an array of capabilities to be modified by the event 
               events:  # define an array of events that modify capability attributes on the entity
                 - event:  # start of an event; each element of the events array begins this way
                     event_type: zwave_js_value_notification
                     data:  # optional section, if further matching to the event data is required
                       node_id: 12
                       property: "scene" # Square button
                       property_key: "001"
                   response:  # begin the (required) response section for handling the event
                     "button.state":  # an attribute that the event modifies.
                       from: "event.data.value"  # dot-reference expression to pull value from event message
                       map:                    # optional, map to modify value
                         KeyPressed: 'appui_court'   # if value is value_in, it is mapped to new_value
                         KeyReleased: 'appui_relache'
                         KeyHeldDown: 'appui_maintenu'
                     "button.since":  # an attribute that the event modifies.
                       from: "event.context.id"  # dot-reference expression to pull value from event message		
              "Hank_SCN04_bp2":      # Assign an ID to your entity; each entity must have a unique ID
               name: Hank_bp2   # This is optional but recommended, so you have a friendly name
               capabilities: ['button']  # define an array of capabilities to be modified by the event 
               events:  # define an array of events that modify capability attributes on the entity
                 - event:  # start of an event; each element of the events array begins this way
                     event_type: zwave_js_value_notification
                     data:  # optional section, if further matching to the event data is required
                       node_id: 12
                       property: "scene" # Square button
                       property_key: "002"
                   response:  # begin the (required) response section for handling the event
                     "button.state":  # an attribute that the event modifies.
                       from: "event.data.value"  # dot-reference expression to pull value from event message
                       map:                    # optional, map to modify value
                         KeyPressed: 'appui_court'   # if value is value_in, it is mapped to new_value
                         KeyReleased: 'appui_relache'
                         KeyHeldDown: 'appui_maintenu'
                     "button.since":  # an attribute that the event modifies.
                       from: "event.context.id"  # dot-reference expression to pull value from event message
              "Hank_SCN04_bp3":      # Assign an ID to your entity; each entity must have a unique ID
               name: Hank_bp3   # This is optional but recommended, so you have a friendly name
               capabilities: ['button']  # define an array of capabilities to be modified by the event 
               events:  # define an array of events that modify capability attributes on the entity
                 - event:  # start of an event; each element of the events array begins this way
                     event_type: zwave_js_value_notification
                     data:  # optional section, if further matching to the event data is required
                       node_id: 12
                       property: "scene" # Square button
                       property_key: "003"
                   response:  # begin the (required) response section for handling the event
                     "button.state":  # an attribute that the event modifies.
                       from: "event.data.value"  # dot-reference expression to pull value from event message
                       map:                    # optional, map to modify value
                         KeyPressed: 'appui_court'   # if value is value_in, it is mapped to new_value
                         KeyReleased: 'appui_relache'
                         KeyHeldDown: 'appui_maintenu'
                     "button.since":  # an attribute that the event modifies.
                       from: "event.context.id"  # dot-reference expression to pull value from event message
              "Hank_SCN04_bp4":      # Assign an ID to your entity; each entity must have a unique ID
               name: Hank_bp4   # This is optional but recommended, so you have a friendly name
               capabilities: ['button']  # define an array of capabilities to be modified by the event 
               events:  # define an array of events that modify capability attributes on the entity
                 - event:  # start of an event; each element of the events array begins this way
                     event_type: zwave_js_value_notification
                     data:  # optional section, if further matching to the event data is required
                       node_id: 12
                       property: "scene" # Square button
                       property_key: "004"
                   response:  # begin the (required) response section for handling the event
                     "button.state":  # an attribute that the event modifies.
                       from: "event.data.value"  # dot-reference expression to pull value from event message
                       map:                    # optional, map to modify value
                         KeyPressed: 'appui_court'   # if value is value_in, it is mapped to new_value
                         KeyReleased: 'appui_relache'
                         KeyHeldDown: 'appui_maintenu'
                     "button.since":  # an attribute that the event modifies.
                       from: "event.context.id"  # dot-reference expression to pull value from event message
      #
      #

I abruptly attach a copy of my file.
I was inspired by the code given in the posts above
It works correctly for me.

[toggledbits]

A couple of things:

1. The indenting is incorrect. The parser may accept it, for now, but a future upgrade to the parser library may be more strict (I do not write the library, I just include it as a dependency). Use a tool like yamllint to fix it.
2. You should not change the values in the map section. The values there are meant to map Hass' values into Reactor's values, and the Reactor-side values you have modified are not valid Reactor values for the button.state attribute. Valid values are defined by Reactor's button capability and include: single, double, triple, 4, 5, hold, release, and long. You should return these to the values originally given, and adjust your condition tests accordingly.

[apocalypsehobby]

@toggledbits wow, thank you.

I've successfully added the Hank devices to the reactor.yaml file, along with a couple other remotes. Here are my notes for anyone else on this endeavor.

• Hank HKZW-SCN04 has 4 buttons, and from my tests they do not support 2x or 3x clicks/presses.

• Minoston MR40Z V1.0 has 4 buttons, and supports all of the presses that you mapped.

• Zooz ZEN34 Ver. 1.0 has 2 buttons and supports all the presses that you mapped PLUS it has 4x and 5x presses as well.

[apocalypsehobby]

Hey friends - I'm trying this again with another remote, this time the ZB-5001 from RGB Genie.

It's not working yet, but I feel like I'm close. The device is successfully populating into MSR as an Entity, but when I press a button on the remote it does not report any changes to MSR.

Could you help me check my work?

---

DATA FROM HASSIO_EVENTS.LOG

• "endpoint_id" tells which button has been pressed (1-5)
• "cluster_id" seems to always stay at 6
• "command" shows whether you've pressed the "on" or "off" side of buttons 1-5

zha_event {
	"id": 1676585189844,
	"type": "event",
	"event": {
		"event_type": "zha_event",
		"data": {
			"device_ieee": "60:a4:23:ff:fe:65:a3:fb",
			"unique_id": "60:a4:23:ff:fe:65:a3:fb:2:0x0006",
			"device_id": "516aaf4459a4f4f319a178de36a28dfd",
			"endpoint_id": 1,
			"cluster_id": 6,
			"command": "on",
			"args": [],
			"params": {}
		},
		"origin": "LOCAL",
		"time_fired": "2023-02-16T22:07:24.518489+00:00",
		"context": {
			"id": "01GSE495V6J686X0RGXYZ046CG",
			"parent_id": null,
			"user_id": null
		}
	}

MY BEST ATTEMPT AT THE CODE FOR REACTOR.YAML

      event_targets: 
        "RGBG-Remote-Button-1": 
          name: "RGBG Remote Button 1"
          capabilities: 
            - button
          events: 
            - event: 
                event_type: zha_event
                data: 
                  device_id: "516aaf4459a4f4f319a178de36a28dfd"
                  endpoint_id: "1"
              response: 
                button.since: 
                  from: event.data.time_fired
                button.state: 
                  from: event.data.command
                  map: 
                    on: on
                    off: off

[toggledbits]

"It's not working yet" isn't an adequate description of expectation vs observation, but I can tell right off your map is probably wrong.

map:
  "on": true
  "off": false

The words on and off have special meaning in YAML and must be quoted here. The explicit words true and false for boolean values should be used.

Also, your since value should be put through the time() function, because that attribute is a timestamp, not a string.

If there are other problems, we'd need more narrative description to help lead us in the right direction.

And of course, you've checked the logs for helpful messages, right?

[apocalypsehobby]

@toggledbits Thank you for helping, and that's more than fair.

I was pressing a button on the remote while viewing the Entity section of MSR, and the virtual device showed no change (the values stayed at "null"). I was expecting them to report on/off and to report the time change.

---

For others' reference, it is now working with the following code:

      event_targets: 
        "RGBG-Remote-Button-1": 
          name: "RGBG Remote Button 1"
          capabilities: 
            - button
          events: 
            - event: 
                event_type: zha_event
                data: 
                  unique_id: "60:a4:23:ff:fe:65:a3:fb:1:0x0006"
              response: 
                button.since: 
                  expr: time()
                button.state: 
                  from: event.data.command
                  map: 
                    "on": true
                    "off": false

Same goes for buttons 2-5, just tweak the value of "unique_id". Button 1 it ends with "1:0x0006" and button 2 would end with "2:0x0006", etc.

A caveat to this device is the on/off buttons at the very top send the same signal to HA as the "device 1 on/off" buttons (1:0x0006).

Here's a link to the device: https://rgbgenie.com/?product=rgbgenie-5-zone-remote-and-dimmer-zigbee