Skip to content
  • Categories
  • Recent
  • Tags
  • Popular
  • Unsolved
Collapse
Discussion Forum to share and further the development of home control and automation, independent of platforms.
  1. Home
  2. Software
  3. Multi-System Reactor
  4. Issues installing MSR on Debian 10 Linux
Advice reqeusted to migrate MSR from Bare Metal to Container
T
Good day all, I'm in the process of trying to shut down my 10 year old Linux home server that served many purposes, but primarily it's what I used for my NAS/Plex Media server. I migrated the NAS aspect of the server in November of last year to a true NAS solution (Ubiquti UNAS Pro), which is rack mount and much more efficient than my old tower, which it's only side benefit was heating my home office during the winter. Unfortunately it also means heating my home office during the summer, which were about to be in full swing. I have two things running on this 10 year old server at this point. MSR and pi-hole. I'm running Plex Media Server on Fedora Workstation in Podman on mini PC, which is much more energy efficient than my old tower. My next step is to migrate MSR. I know there are images of MSR out there, and creating it is well documented. I'm going to be using Podman instead of Docker for various reasons, but they work very similar. What I don't know, is what I need to do to migrate my existing Bare Metal installation over to a container. Has anyone done this? Any advice?
Multi-System Reactor
Reactor (Multi-System/Multi-Hub) Announcements
toggledbitsT
Build 21228 has been released. Docker images available from DockerHub as usual, and bare-metal packages here. Home Assistant up to version 2021.8.6 supported; the online version of the manual will now state the current supported versions; Fix an error in OWMWeatherController that could cause it to stop updating; Unify the approach to entity filtering on all hub interface classes (controllers); this works for device entities only; it may be extended to other entities later; Improve error detail in messages for EzloController during auth phase; Add isRuleSet() and isRuleEnabled() functions to expressions extensions; Implement set action for lock and passage capabilities (makes them more easily scriptable in some cases); Fix a place in the UI where 24-hour time was not being displayed.
Multi-System Reactor
Can´t restart or upgrade/deploy MSR
F
Topic thumbnail image
Multi-System Reactor
[Solved] Limit HA Entity in MSR
wmarcolinW
Topic thumbnail image
Multi-System Reactor
Organizing/ structuring rule sets and rules
R
Hi guys, Just wondering how you guys organize your rule sets and rules. I wish I had an extra layer to have some more granularity, but my feature request was not popular. Maybe there are better ways to organize my rule sets. I use the rule sets now primarily for rooms. So a rule set per room. But maybe grouping by functionality works better. Any examples/ suggestions would be appreciated.
Multi-System Reactor
Moving MSR from a QNAP container to RP 5 - some issues
Tom_DT
Topic thumbnail image
Multi-System Reactor
Widget deletion does not work and landing page (status) is empy
M
Topic thumbnail image
Multi-System Reactor
Need help reducing false positive notifications
T
Topic thumbnail image
Multi-System Reactor
Deleting widgets
tunnusT
Hopefully a trivial question, but how do you delete widgets in a status page? Using build 22266
Multi-System Reactor
MQTT configuration question
tunnusT
I have the following yaml configuration in local_mqtt_devices file x_mqtt_device: set_speed: arguments: speed: type: str topic: "command/%friendly_name%" payload: type: json expr: '{ "fan": parameters.speed }' While this works fine, I'm wondering how this could be changed to "fixed" parameters, as in this case "fan" only accepts "A", "Q" or a numeric value of 1-5?
Multi-System Reactor
System Configuration Check - time is offset
F
Hi! I get this message when I'm on the status tab: System Configuration Check The time on this system and on the Reactor host are significantly different. This may be due to incorrect system configuration on either or both. Please check the configuration of both systems. The host reports 2025-04-01T15:29:29.252Z; browser reports 2025-04-01T15:29:40.528Z; difference 11.276 seconds. I have MSR installed as a docker on my Home Assistant Blue / Hardkernel ODROID-N2/N2+. MSR version is latest-25082-3c348de6. HA versions are: Core 2025.3.4 Supervisor 2025.03.4 Operating System 15.1 I have restarted HA as well as MSR multiple times. This message didn´t show two weeks ago. Don´t know if it have anything to do with the latest MSR version. Do anyone know what I can try? Thanks in advance! Let's Be Careful Out There (Hill Street reference...) /Fanan
Multi-System Reactor
Programmatically capture HTTP Request action status code or error
therealdbT
I have a very strange situation, where if InfluxDB restarts, other containers may fail when restarting at the same time (under not easy to understand circumstances), and InfluxDB remains unreachable (and these containers crashes). I need to reboot these containers in an exact order, after rebooting InfluxDB. While I understand what's going on, I need a way to reliable determine that InfluxDB is not reachable and these containers are not reachable, in order to identify this situation and manually check what's going on - and, maybe, in the future, automatically restart them if needed. So, I was looking at HTTP Request action, but I need to capture the HTTP response code, instead of the response (becase if ping is OK, InfluxDB will reply with a 204), and, potentially, a way to programmatically detect that it's failing to get the response. While I could write a custom HTTP controller for this or a custom HTTP virtual device, I was wondering if this is somewhat on you roadmap @toggledbits Thanks!
Multi-System Reactor
ZwaveJSUI - RGBWW BULB - Warm/Cold White interfered with RGB settings - Bulb doesn't change color if in WarmWhite state.
N
Hi , I'm on -Reactor (Multi-hub) latest-25067-62e21a2d -Docker on Synology NAS -ZWaveJSUI 9.31.0.6c80945 Problem with ZwaveJSUI: When I try to change color to a bulb RGBWW, it doesn't change to the RGB color and the bulb remains warm or cold white. I tryed with Zipato RGBW Bulb V2 RGBWE2, Hank Bulb HKZW-RGB01, Aentec 6 A-ZWA002, so seems that it happens with all RGBWW bulb with reactor/zwavejsui. I'm using from reator the entity action: "rgb_color.set" and "rgb_color.set_rgb". After I send the reactor command, It changes in zwavejsui the rgb settings but doesn't put the white channel to "0", so the prevalent channel remains warm/cold White and the bulb doesn't change into the rgb color. This is the status of the bulb in zwavejsui after "rgb_color.set" (235,33,33,) and the bulb is still warmWhite. x_zwave_values.Color_Switch_currentColor={"warmWhite":204,"coldWhite":0,"red":235,"green":33,"blue":33} The "cold white" and "warm white" settings interfer with the rgb color settings. Reactor can change bulb colors with rgb_color set — (value, ui8, 0x000000 to 0xffffff) or rgb_color set_rgb — (red, green, blue, all ui1, 0 to 255) but if warm or cold white are not to "0", zwavejsui doesn't change them and I can't find a way to change into rgb or from rgb back to warm white. So if I use from reactor: rgb_color set_rgb — (235,33,33) in zwavejsui I have x_zwave_values.Color_Switch_targetColor={"red":235,"green":33,"blue":33} 14/03/2025, 16:43:57 - value updated Arg 0: └─commandClassName: Color Switch └─commandClass: 51 └─property: targetColor └─endpoint: 0 └─newValue └──red: 235 └──green: 33 └──blue: 33 └─prevValue └──red: 235 └──green: 33 └──blue: 33 └─propertyName: targetColor 14/03/2025, 16:43:57 - value updated Arg 0: └─commandClassName: Color Switch └─commandClass: 51 └─property: currentColor └─endpoint: 0 └─newValue └──warmWhite: 204 └──coldWhite: 0 └──red: 235 └──green: 33 └──blue: 33 └─prevValue └──warmWhite: 204 └──coldWhite: 0 └──red: 235 └──green: 33 └──blue: 33 └─propertyName: currentColor In zwavejsui, the bulb changes rgb set but warm White remains to "204" and the bulb remais on warm White channel bacause is prevalent on rgb set. x_zwave_values.Color_Switch_currentColor_0=204 x_zwave_values.Color_Switch_currentColor_1=0 x_zwave_values.Color_Switch_currentColor_2=235 x_zwave_values.Color_Switch_currentColor_3=33 x_zwave_values.Color_Switch_currentColor_4=33 Is it possible to targetColor also for "warmWhite" and "coldWhite" and have something similar to this? x_zwave_values.Color_Switch_targetColor={"warmWhite":0,"coldWhite":0,"red":235,"green":33,"blue":33} Thanks in advance.
Multi-System Reactor
Problem with simultaneous notifications.
T
Topic thumbnail image
Multi-System Reactor
Problem after upgrading to 25067
R
MSR had been running fine, but I decided to follow the message to upgrade to 25067. Since the upgrade, I have received the message "Controller "<name>" (HubitatController hubitat2) could not be loaded at startup. Its ID is not unique." MSR throws the message on every restart. Has anyone else encountered this problem? I am running MSR on a Raspberry Pi4 connecting to two Hubitat units over an OpenVPN tunnel. One C8 and a C8 Pro. Both are up-to-date. It appears that despite the error message that MSR may be operating properly.
Multi-System Reactor
Global expressions not always evaluated
tunnusT
Topic thumbnail image
Multi-System Reactor
[Solved] Local expression evaluation
V
Topic thumbnail image
Multi-System Reactor
[Solved] Runtime error when exiting global reaction that contains a group
S
I am getting a Runtime error on different browsers when I click exit when editing an existing or creating a new global reaction containing a group. If the global reaction does not have a group I don't get an error. I see a similar post on the forum about a Runtime Error when creating reactions but started a new thread as that appears to be solved. The Runtime Error is different in the two browsers Safari v18.3 @http://192.168.10.21:8111/reactor/en-US/lib/js/reaction-list.js:171:44 You may report this error, but do not screen shot it. Copy-paste the complete text. Remember to include a description of the operation you were performing in as much detail as possible. Report using the Reactor Bug Tracker (in your left navigation) or at the SmartHome Community. Google Chrome 133.0.6943.142 TypeError: self.editor.isModified is not a function at HTMLButtonElement.<anonymous> (http://192.168.10.21:8111/reactor/en-US/lib/js/reaction-list.js:171:34) You may report this error, but do not screen shot it. Copy-paste the complete text. Remember to include a description of the operation you were performing in as much detail as possible. Report using the Reactor Bug Tracker (in your left navigation) or at the SmartHome Community. Steps to reproduce: Click the pencil to edit a global reaction with a group. Click the Exit button. Runtime error appears. or Click Create Reaction Click Add Action Select Group Add Condition such as Entity Attribute. Add an Action. Click Save Click Exit Runtime error appears. I don’t know how long the error has been there as I haven’t edited the global reaction in a long time. Reactor (Multi-hub) latest-25060-f32eaa46 Docker Mac OS: 15.3.1 Thanks
Multi-System Reactor
Cannot delete Global Expressions
SnowmanS
I am trying to delete a global expression (gLightDelay) but for some strange reason, it comes back despite clicking the Delete this expression and Save Changes buttons. I have not created a global expression for some times and just noticed this while doing some clean-up. I have upgraded Reactor to 25067 from 25060 and the behaviour is still there. I have restarted Reactor (as well as restarting its container) and cleared the browser's cache several times without success. Here's what the log shows. [latest-25067]2025-03-08T23:50:22.690Z <wsapi:INFO> [WSAPI]wsapi#1 rpc_echo [Object]{ "comment": "UI activity" } [latest-25067]2025-03-08T23:50:26.254Z <GlobalExpression:NOTICE> Deleting global expression gLightDelay [latest-25067]2025-03-08T23:50:27.887Z <wsapi:INFO> [WSAPI]wsapi#1 rpc_echo [Object]{ "comment": "UI activity" } Reactor latest-25067-62e21a2d Docker on Synology NAS
Multi-System Reactor
Local notification methods?
CatmanV2C
Morning, experts. Hard on learning about the internet check script in MSR tools, I was wondering what suggestions anyone has about a local (i.e. non-internet dependent) notification method. This was prompted by yesterday's fun and games with my ISP. I've got the script Cronned and working properly but short of flashing a light on and off, I'm struggling to think of a way of alerting me (ideally to my phone) I guess I could set up a Discord server at home, but that feels like overkill for a rare occasion. Any other suggestions? TIA C
Multi-System Reactor

Issues installing MSR on Debian 10 Linux

Scheduled Pinned Locked Moved Multi-System Reactor
27 Posts 3 Posters 1.5k Views 3 Watching
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • toggledbitsT toggledbits

    If your platform doesn't offer a more current nodejs, you'll have to download nodejs directly and install it using their documentation for Linux installs.

    Note: To avoid confusion, remove the nodejs and npm packages you installed before downloading and installing.

    Note 2: You really should go to node 14.15 or higher. I'm going to remove support for 12 before release this summer.

    cw-kidC Offline
    cw-kidC Offline
    cw-kid
    wrote on last edited by
    #6

    @toggledbits said in Issues installing MSR on Debian 10 Linux:

    To avoid confusion, remove the nodejs and npm packages you installed before downloading and installing.

    OK thanks that's helpful about running it as a service, but I am not that far along yet I don't think.

    Now need to uninstall node js and the npm packages and then install the 14.x node js version etc.

    Which I am not sure how to uninstall things yet.

    1 Reply Last reply
    0
    • cw-kidC Offline
      cw-kidC Offline
      cw-kid
      wrote on last edited by
      #7

      OK I think I have uninstalled everything using these commands:

      apt remove nodejs

      apt autoremove

      I've downloaded the x86 64bit Linux version of node js and I am looking at installing that one instead now.

      1 Reply Last reply
      0
      • toggledbitsT Offline
        toggledbitsT Offline
        toggledbits
        wrote on last edited by toggledbits
        #8

        It looks like the PPA link you gave recommends adding a package repository and installing them via apt, so uninstall should just be:

        sudo apt remove nodejs npm

        Those PPA instructions also tell you how to get the version you want.

        Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

        cw-kidC 1 Reply Last reply
        0
        • toggledbitsT toggledbits

          It looks like the PPA link you gave recommends adding a package repository and installing them via apt, so uninstall should just be:

          sudo apt remove nodejs npm

          Those PPA instructions also tell you how to get the version you want.

          cw-kidC Offline
          cw-kidC Offline
          cw-kid
          wrote on last edited by cw-kid
          #9

          @toggledbits said in Issues installing MSR on Debian 10 Linux:

          sudo apt remove nodejs npm

          Bit late to run that command:

           apt remove nodejs npm
          Reading package lists... Done
          Building dependency tree
          Reading state information... Done
          Package 'npm' is not installed, so not removed
          Package 'nodejs' is not installed, so not removed
          0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
          

          I think the commands I ran earlier have removed things but I still see a .npm folder in my home folder.

          c7a88505-96b9-40b0-a19f-c6351d411418-image.png

          I am working out now how to install the later 14.x version of node js.

          EDIT:

          I installed again using the PPA method and just changed the curl command to use the 14.x

          curl -sL https://deb.nodesource.com/setup_14.x -o nodesource_setup.sh
          

          I now have node version 14.17.0 installed.

          1 Reply Last reply
          0
          • toggledbitsT Offline
            toggledbitsT Offline
            toggledbits
            wrote on last edited by
            #10

            Don't forget to complete the Reactor install instructions here: https://reactor.toggledbits.com/docs/Installation/#new-install-linux-various-bare-metal-without-docker

            Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

            cw-kidC 1 Reply Last reply
            0
            • toggledbitsT toggledbits

              Don't forget to complete the Reactor install instructions here: https://reactor.toggledbits.com/docs/Installation/#new-install-linux-various-bare-metal-without-docker

              cw-kidC Offline
              cw-kidC Offline
              cw-kid
              wrote on last edited by
              #11

              @toggledbits

              OK making some progress slowly. I now have MSR up and running automatically after a system reboot.

              And I am on node js version 14.17.0

              Now to copy everything from my Rpi installation to the new HP Thin Client installation to get all my rules moved over.

              I assume I can just copy the entire reactor folder from one machine to the other.

              1 Reply Last reply
              1
              • toggledbitsT Offline
                toggledbitsT Offline
                toggledbits
                wrote on last edited by
                #12

                You just need config and storage subfolders. It won't hurt to copy everything, but it's overkill.

                Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                1 Reply Last reply
                1
                • cw-kidC Offline
                  cw-kidC Offline
                  cw-kid
                  wrote on last edited by
                  #13

                  OK many thanks.

                  Just looking at setting a static LAN IP first on the new HP thin client box.

                  1 Reply Last reply
                  0
                  • toggledbitsT Offline
                    toggledbitsT Offline
                    toggledbits
                    wrote on last edited by
                    #14

                    Probably a good idea to make sure you have NTP running on the box as well (network time).

                    Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                    cw-kidC 2 Replies Last reply
                    0
                    • toggledbitsT toggledbits

                      Probably a good idea to make sure you have NTP running on the box as well (network time).

                      cw-kidC Offline
                      cw-kidC Offline
                      cw-kid
                      wrote on last edited by
                      #15

                      @toggledbits said in Issues installing MSR on Debian 10 Linux:

                      NTP running on the box

                      OK I'll have to look in to how to do that then also.

                      1 Reply Last reply
                      0
                      • rafale77R Offline
                        rafale77R Offline
                        rafale77
                        wrote on last edited by
                        #16

                        @cw-kid, yeah it takes a little googling to set up and brand new debian OS but I am sure you will get there. I went through the same thing setting up my T640. Debian takes a little bit more work than ubuntu which has a lot of these setup by default.

                        cw-kidC 1 Reply Last reply
                        0
                        • toggledbitsT toggledbits

                          Probably a good idea to make sure you have NTP running on the box as well (network time).

                          cw-kidC Offline
                          cw-kidC Offline
                          cw-kid
                          wrote on last edited by cw-kid
                          #17

                          @toggledbits

                          I'm reading this article about Debian and time here.

                          The date and time is currently set correctly:

                          ebdf9d21-924e-4882-86f2-a9379151a8ff-image.png

                          "By default, Debian 10 runs the standard ntpd server to keep your system time synchronized with a pool of external time servers. We can check that it’s running with the systemctl command:"

                          sudo systemctl status ntp
                          

                          When I run this command in Putty it says:

                          Unit ntp.service could not be found.
                          

                          It goes on to say "To get more information about the status of ntpd we can use the ntpq command:"

                          ntpq -p
                          

                          I get the response:

                          -bash: ntpq: command not found
                          

                          So maybe its not currently installed on my installation.

                          its only a 16GB SSD in the HP Thin Client, so I don't have a desktop environment installed only SSH server etc.

                          I will look at installing this ntpd service next.

                          EDIT:

                          Ran this command to install it:

                          apt-get install ntp
                          

                          Now the above commands are working.

                          6e29b00a-150e-49c7-9431-113e74dbaae7-image.png

                          89006b54-fc75-44b9-a6c5-ecec6f5d950d-image.png

                          1 Reply Last reply
                          0
                          • rafale77R rafale77

                            @cw-kid, yeah it takes a little googling to set up and brand new debian OS but I am sure you will get there. I went through the same thing setting up my T640. Debian takes a little bit more work than ubuntu which has a lot of these setup by default.

                            cw-kidC Offline
                            cw-kidC Offline
                            cw-kid
                            wrote on last edited by cw-kid
                            #18

                            @rafale77

                            Hi, well I bought the HP T520 Thin Client because of what you said to me previously. It was cheap enough from eBay.

                            I had some issues with the power supply however as it didn't come with one.
                            I did have a spare suitably spec'd laptop power supply, but it had the wrong DC connector plug on the end of it.

                            So I ordered the correct "DC Tip 7.4x5.0mm Power Plug Socket Connector" off eBay and cut the other one off and soldered the new one on.

                            However the HP Thin Client was not turning on, no power nothing at all and totally dead.

                            I then read that you have to use a genuine HP power supply, as they have some kind of checking so that the thin clients won't power on if you are using a 3rd party power supply.

                            Corporate Greed !

                            I then found an article about hacking the unit and soldering in a 240K resister on the back of the power input jack and I did this today and amazingly it worked and the thin client powered on.

                            alt text

                            alt text

                            One thing I can't figure out how to do yet is to update the BIOS without having one of their supported OS installed.

                            rafale77R 1 Reply Last reply
                            0
                            • cw-kidC cw-kid

                              @rafale77

                              Hi, well I bought the HP T520 Thin Client because of what you said to me previously. It was cheap enough from eBay.

                              I had some issues with the power supply however as it didn't come with one.
                              I did have a spare suitably spec'd laptop power supply, but it had the wrong DC connector plug on the end of it.

                              So I ordered the correct "DC Tip 7.4x5.0mm Power Plug Socket Connector" off eBay and cut the other one off and soldered the new one on.

                              However the HP Thin Client was not turning on, no power nothing at all and totally dead.

                              I then read that you have to use a genuine HP power supply, as they have some kind of checking so that the thin clients won't power on if you are using a 3rd party power supply.

                              Corporate Greed !

                              I then found an article about hacking the unit and soldering in a 240K resister on the back of the power input jack and I did this today and amazingly it worked and the thin client powered on.

                              alt text

                              alt text

                              One thing I can't figure out how to do yet is to update the BIOS without having one of their supported OS installed.

                              rafale77R Offline
                              rafale77R Offline
                              rafale77
                              wrote on last edited by
                              #19

                              @cw-kid

                              I don't have this exact model but... my HP desktops all have the ability to update the BIOS from within the UEFI BIOS. Have you tried that? Sorry for the song and dance on the power supply. I never encountered this since I always got power bricks with the ones I bought and I actually have spare power supplies... Great soldering job though!

                              cw-kidC 1 Reply Last reply
                              0
                              • rafale77R rafale77

                                @cw-kid

                                I don't have this exact model but... my HP desktops all have the ability to update the BIOS from within the UEFI BIOS. Have you tried that? Sorry for the song and dance on the power supply. I never encountered this since I always got power bricks with the ones I bought and I actually have spare power supplies... Great soldering job though!

                                cw-kidC Offline
                                cw-kidC Offline
                                cw-kid
                                wrote on last edited by
                                #20

                                @rafale77

                                There is an option in the BIOS menu to update / flash the BIOS but when I click OK on it, it says:

                                "Can not find bios update interface"

                                I've not really looked in to it properly yet as I was keen to get MSR up and running first.

                                From the quick Google searches I did, most suggested you need to have one of the HP supported operating systems installed to be able to update the BIOS.

                                But there must be some work around some how. I need to read in to it more.

                                1 Reply Last reply
                                0
                                • cw-kidC Offline
                                  cw-kidC Offline
                                  cw-kid
                                  wrote on last edited by cw-kid
                                  #21

                                  @toggledbits I copied over the storage and config folder contents from the Rpi to the HP Thin Client and then restarted MSR on the thin client.

                                  I did edit the base URL in the Reactor.yaml file.

                                  I've stopped the MSR service on the Rpi so now the thin client is the only one running..

                                  None of my scheduled rulesets based around sunset have run their actions this evening for some reason.

                                  The time shown in the top of the MSR Web GUI is the correct time.

                                  So seems I need to look into this further.

                                  There is another schedule up coming, the garden lights should turn on 20 minutes after sunset, that is in about 20 minutes time from now, so will see if that happens?

                                  EDIT:

                                  These are the before sunset rules that the other rules reference in their triggers.

                                  20 and 40 minutes before sunset, not sure why both say true as of the same time at 20:48pm.

                                  e9f128b8-e60a-42e8-9290-7491c94a8650-image.png

                                  The after sunset 20 minutes rule says:

                                  waiting for 21:21:00

                                  Its now 21:25pm and my garden lights have NOT turned on, so something not right here.

                                  This is the summary card for the rule that turns on the garden lights:

                                  295b0a4f-eea8-4c12-b9c6-70e130b00e9d-image.png

                                  1 Reply Last reply
                                  0
                                  • cw-kidC Offline
                                    cw-kidC Offline
                                    cw-kid
                                    wrote on last edited by cw-kid
                                    #22

                                    Not sure which rule this is, but I am seeing several errors in the log like these:

                                    2021-05-15T19:48:14.906Z <Rule:5:Rule.js:957> Rule#rule-km50yfxo._evaluate() mutex acquired, evaluating
                                    2021-05-15T19:48:14.907Z <Rule:5:Rule.js:961> Rule#rule-km50yfxo update rate is 1/min limit 60/min
                                    2021-05-15T19:48:14.908Z <Rule:5:Rule.js:883> Rule#rule-km50yfxo evaluateExpressions() with 0 expressions
                                    2021-05-15T19:48:14.910Z <Rule:5:Rule.js:973> Rule#rule-km50yfxo._evaluate() trigger state now true (was true)
                                    2021-05-15T19:48:14.911Z <Rule:5:Rule.js:1351> Rule#rule-km50yfxo cond cond5hu03sp timer schedule 1621119600000<16/05/2021, 00:00:00>
                                    2021-05-15T19:48:14.913Z <Rule:5:Rule.js:975> Rule#rule-km50yfxo._evaluate() constraints state false
                                    2021-05-15T19:48:14.913Z <Rule:null> Rule#rule-km50yfxo rule state now false, changed no
                                    2021-05-15T19:48:14.915Z <Rule:CRIT> Error: EACCES: permission denied, open '/home/stuart/reactor/storage/states/cs-rule-km50yfxo.json'
                                    Error: EACCES: permission denied, open '/home/stuart/reactor/storage/states/cs-rule-km50yfxo.json'
                                        at Object.openSync (fs.js:498:3)
                                        at Object.writeFileSync (fs.js:1524:35)
                                        at IndividualFileStrategy.saveDataObject (/home/stuart/reactor/server/lib/IndividualFileStrategy.js:137:29)
                                        at Container.saveDataObject (/home/stuart/reactor/server/lib/Container.js:94:54)
                                        at Data.save (/home/stuart/reactor/server/lib/Data.js:152:49)
                                        at Rule._evaluate (/home/stuart/reactor/server/lib/Rule.js:985:365)
                                        at runMicrotasks (<anonymous>)
                                        at processTicksAndRejections (internal/process/task_queues.js:95:5)
                                        at async /home/stuart/reactor/server/lib/Rule.js:940:17
                                    

                                    Think something may have gone wrong with copying over the stuff from the Pi.

                                    This is that folder in WinSCP on the HP Thin Client.

                                    50a14a12-f394-41ed-b12a-5b7cedda1857-image.png

                                    I installed MSR as a none root user aka as my own username name. But these rule set files most are saying root as the owner.

                                    I was logged in to WinSCP as root user when I did the copy so maybe that is why.

                                    If I try logging in to WinSCP as my username instead of root and then doing the copy again from the Pi to the Thin Client it doesn't work and I don't seem to have the permissions to do it.

                                    dbec463b-855f-4275-9ec9-ff782ac1ee61-image.png

                                    If instead I try to change the group and owner of a file from root to my username I can't do that either:

                                    d1b0a698-aff6-4e8d-8ef8-e75642c2e85f-image.png

                                    So I am stuck now and don't know what to do.....

                                    OK I logged back in to WinSCP as root and now I can change all the files their group and owner from root to my own user name. I have done that now for all of them.

                                    So hopefully that fixes the problem? Will have to wait for later schedules to happen later this evening to see.

                                    1 Reply Last reply
                                    0
                                    • cw-kidC Offline
                                      cw-kidC Offline
                                      cw-kid
                                      wrote on last edited by
                                      #23

                                      A scheduled rule set just ran actually and turned on the RGBW light strip in the kitchen, so think it's working now.

                                      1 Reply Last reply
                                      0
                                      • toggledbitsT Offline
                                        toggledbitsT Offline
                                        toggledbits
                                        wrote on last edited by toggledbits
                                        #24

                                        Make sure your system time zone is set to local time. If the default is UTC or something else, all time-based rules will be a mess. The displayed time in the GUI is browser time, not system (host) time.

                                        Fix permissions in your Reactor config and storage with this:

                                        sudo chown -R stuart:stuart config/ storage/
                                        

                                        Edit: To see current host time configuration:

                                        http://your-msr-host-ip:8111/diag/sun
                                        

                                        Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                                        cw-kidC 1 Reply Last reply
                                        0
                                        • toggledbitsT toggledbits

                                          Make sure your system time zone is set to local time. If the default is UTC or something else, all time-based rules will be a mess. The displayed time in the GUI is browser time, not system (host) time.

                                          Fix permissions in your Reactor config and storage with this:

                                          sudo chown -R stuart:stuart config/ storage/
                                          

                                          Edit: To see current host time configuration:

                                          http://your-msr-host-ip:8111/diag/sun
                                          
                                          cw-kidC Offline
                                          cw-kidC Offline
                                          cw-kid
                                          wrote on last edited by cw-kid
                                          #25

                                          @toggledbits said in Issues installing MSR on Debian 10 Linux:

                                          http://your-msr-host-ip:8111/diag/sun

                                          The host time is currently 16/05/2021, 14:20:58 offset 60 minutes from UTC (TZ=undefined); location (lat,lon) 53.99078,-1.5373 elev 127; sunrise 16/05/2021, 05:01:40, sunset 16/05/2021, 21:03:33.
                                          {"sunrise":1621137700000,"sunset":1621195413000,"civdawn":1621134941000,"civdusk":1621198173000,"nautdawn":1621130939000,"nautdusk":1621202174000,"astrodawn":null,"astrodusk":null,"solarnoon":1621166557000,"daylength":16.031,"angle":14.6}
                                          

                                          Time looks to be correct, however it says "TZ=undefined".

                                          None of my schedule rules were running last night because of the permissions issue when I copied them from the Pi to the Thin Client.

                                          I fixed that and then they started working again OK.

                                          I've got everything moved over from the Pi now to the new Thin Client, also setup today Node-Red and Java HA-Bridge.

                                          @rafale77

                                          What's the best way to be backing up Debian ?

                                          The SSD is only 16GB so guess I could take a full system snapshot rather than just backing up certain files and folders.

                                          781ce661-d0b4-4f34-b804-24a57ec748d0-image.png

                                          1 Reply Last reply
                                          0
                                          Reply
                                          • Reply as topic
                                          Log in to reply
                                          • Oldest to Newest
                                          • Newest to Oldest
                                          • Most Votes


                                          Recent Topics

                                          • Advice reqeusted to migrate MSR from Bare Metal to Container
                                            T
                                            tamorgen
                                            0
                                            5
                                            34

                                          • Reactor (Multi-System/Multi-Hub) Announcements
                                            toggledbitsT
                                            toggledbits
                                            5
                                            122
                                            35.4k

                                          • Z-Wave Future....
                                            CatmanV2C
                                            CatmanV2
                                            0
                                            5
                                            126

                                          • Can´t restart or upgrade/deploy MSR
                                            toggledbitsT
                                            toggledbits
                                            0
                                            4
                                            83

                                          • [Solved] Limit HA Entity in MSR
                                            wmarcolinW
                                            wmarcolin
                                            0
                                            7
                                            188

                                          • Disaster recovery and virtualisation
                                            CatmanV2C
                                            CatmanV2
                                            0
                                            5
                                            655

                                          • Remote access of Zwave stick from Z-wave server
                                            CatmanV2C
                                            CatmanV2
                                            0
                                            3
                                            380

                                          • Organizing/ structuring rule sets and rules
                                            G
                                            gwp1
                                            0
                                            5
                                            373

                                          • Moving MSR from a QNAP container to RP 5 - some issues
                                            G
                                            gwp1
                                            0
                                            5
                                            343

                                          • Widget deletion does not work and landing page (status) is empy
                                            G
                                            gwp1
                                            0
                                            4
                                            335

                                          • Need help reducing false positive notifications
                                            T
                                            tamorgen
                                            0
                                            7
                                            518
                                          Powered by NodeBB | Contributors
                                          Hosted freely by 10RUPTiV - Solutions Technologiques | Contact us
                                          • Login

                                          • Don't have an account? Register

                                          • Login or register to search.
                                          • First post
                                            Last post
                                          0
                                          • Categories
                                          • Recent
                                          • Tags
                                          • Popular
                                          • Unsolved