Skip to content
  • Categories
  • Recent
  • Tags
  • Popular
  • Unsolved
Collapse
Discussion Forum to share and further the development of home control and automation, independent of platforms.
  1. Home
  2. Software
  3. Multi-System Reactor
  4. Need Testers
Need help reducing false positive notifications
T

Good day all,
I have an notification set up for my washing machine to let me know when it's complete. I have a templete sensor set up in HAAS to let me know if it's Washing, in Standby, or off, based upon the power consumption (Shelly 1PM on outlets)

- name: "Washing Machine" state: > {% if states("sensor.washer_switch_0_power")|float == 0 %} Off {% elif states("sensor.washer_switch_0_power")|float <= 2.9 %} Standby {% else %} Washing {% endif %} icon: > {% if states("sensor.washer_switch_0_power") == "off" %} mdi:washing-machine-alert {% elif states("sensor.washer_switch_0_power")|float <= 2.9 %} mdi:washing-machine-off {% else %} mdi:washing-machine {% endif %} minutes: 2

The MSR code is relatively simple. I have a built in false positive attribute for if MSR gets rebooted, because I would suddenly get tons of notifications when I upgraded MSR.

6774565a-06cc-443f-99c1-e71301b33d83-image.png

What I'm trying to introduce, is a way to verify that I just didn't bump the knob on the washing machine when transferring loads from the washer to the dryer, which turns on the display and brings the power above the Standby threshold.

The power goes up to 3.7W for about 4 minutes if the selector knob is bumped/turned.

What would the best way to do this be? I have most of my MSR code set up for a couple of years now, and my coding logic is struggling a bit.

I think I need a power threshold to be substained for a minimum time period (say 2 or 3 minutes, above 10W), before the other triggers can act. What would the best way to do that be?

Running: latest-25082-3c348de6
Fedora 41 Server
HAAS:
Core
2025.3.4
Supervisor
2025.03.4
Operating System
15.1
Frontend
20250306.0

Multi-System Reactor about 7 hours ago
MQTT configuration question
T

I have the following yaml configuration in local_mqtt_devices file

x_mqtt_device: set_speed: arguments: speed: type: str topic: "command/%friendly_name%" payload: type: json expr: '{ "fan": parameters.speed }'

While this works fine, I'm wondering how this could be changed to "fixed" parameters, as in this case "fan" only accepts "A", "Q" or a numeric value of 1-5?

Multi-System Reactor 3 days ago
System Configuration Check - time is offset
F

Hi!

I get this message when I'm on the status tab:

System Configuration Check
The time on this system and on the Reactor host are significantly different. This may be due to incorrect system configuration on either or both. Please check the configuration of both systems. The host reports 2025-04-01T15:29:29.252Z; browser reports 2025-04-01T15:29:40.528Z; difference 11.276 seconds.

I have MSR installed as a docker on my Home Assistant Blue / Hardkernel ODROID-N2/N2+. MSR version is latest-25082-3c348de6.
HA versions are:
Core 2025.3.4
Supervisor 2025.03.4
Operating System 15.1

I have restarted HA as well as MSR multiple times. This message didn´t show two weeks ago. Don´t know if it have anything to do with the latest MSR version.
Do anyone know what I can try?
Thanks in advance!
Let's Be Careful Out There (Hill Street reference...) 🙂
/Fanan

Multi-System Reactor 4 days ago
Programmatically capture HTTP Request action status code or error
T

I have a very strange situation, where if InfluxDB restarts, other containers may fail when restarting at the same time (under not easy to understand circumstances), and InfluxDB remains unreachable (and these containers crashes). I need to reboot these containers in an exact order, after rebooting InfluxDB.

While I understand what's going on, I need a way to reliable determine that InfluxDB is not reachable and these containers are not reachable, in order to identify this situation and manually check what's going on - and, maybe, in the future, automatically restart them if needed.

So, I was looking at HTTP Request action, but I need to capture the HTTP response code, instead of the response (becase if ping is OK, InfluxDB will reply with a 204), and, potentially, a way to programmatically detect that it's failing to get the response.

While I could write a custom HTTP controller for this or a custom HTTP virtual device, I was wondering if this is somewhat on you roadmap @toggledbits

Thanks!

Multi-System Reactor 6 days ago
ZwaveJSUI - RGBWW BULB - Warm/Cold White interfered with RGB settings - Bulb doesn't change color if in WarmWhite state.
N

Hi ,
I'm on
-Reactor (Multi-hub) latest-25067-62e21a2d
-Docker on Synology NAS
-ZWaveJSUI 9.31.0.6c80945

Problem with ZwaveJSUI:
When I try to change color to a bulb RGBWW, it doesn't change to the RGB color and the bulb remains warm or cold white.
I tryed with Zipato RGBW Bulb V2 RGBWE2, Hank Bulb HKZW-RGB01, Aentec 6 A-ZWA002, so seems that it happens with all RGBWW bulb with reactor/zwavejsui.

I'm using from reator the entity action: "rgb_color.set" and "rgb_color.set_rgb".
After I send the reactor command, It changes in zwavejsui the rgb settings but doesn't put the white channel to "0", so the prevalent channel remains warm/cold White and the bulb doesn't change into the rgb color.

This is the status of the bulb in zwavejsui after "rgb_color.set" (235,33,33,) and the bulb is still warmWhite.

x_zwave_values.Color_Switch_currentColor={"warmWhite":204,"coldWhite":0,"red":235,"green":33,"blue":33}

The "cold white" and "warm white" settings interfer with the rgb color settings.

Reactor can change bulb colors with rgb_color set — (value, ui8, 0x000000 to 0xffffff) or rgb_color set_rgb — (red, green, blue, all ui1, 0 to 255) but if warm or cold white
are not to "0", zwavejsui doesn't change them and I can't find a way to change into rgb or from rgb back to warm white.

So if I use from reactor: rgb_color set_rgb — (235,33,33) in zwavejsui I have

x_zwave_values.Color_Switch_targetColor={"red":235,"green":33,"blue":33} 14/03/2025, 16:43:57 - value updated Arg 0: └─commandClassName: Color Switch └─commandClass: 51 └─property: targetColor └─endpoint: 0 └─newValue └──red: 235 └──green: 33 └──blue: 33 └─prevValue └──red: 235 └──green: 33 └──blue: 33 └─propertyName: targetColor 14/03/2025, 16:43:57 - value updated Arg 0: └─commandClassName: Color Switch └─commandClass: 51 └─property: currentColor └─endpoint: 0 └─newValue └──warmWhite: 204 └──coldWhite: 0 └──red: 235 └──green: 33 └──blue: 33 └─prevValue └──warmWhite: 204 └──coldWhite: 0 └──red: 235 └──green: 33 └──blue: 33 └─propertyName: currentColor

In zwavejsui, the bulb changes rgb set but warm White remains to "204" and the bulb remais on warm White channel bacause is prevalent on rgb set.

x_zwave_values.Color_Switch_currentColor_0=204 x_zwave_values.Color_Switch_currentColor_1=0 x_zwave_values.Color_Switch_currentColor_2=235 x_zwave_values.Color_Switch_currentColor_3=33 x_zwave_values.Color_Switch_currentColor_4=33

Is it possible to targetColor also for "warmWhite" and "coldWhite" and have something similar to this?

x_zwave_values.Color_Switch_targetColor={"warmWhite":0,"coldWhite":0,"red":235,"green":33,"blue":33}

Thanks in advance.

Multi-System Reactor 7 days ago
Problem with simultaneous notifications.
T

Good day all,
I have a reaction set up, that I use for both troubleshooting and changing home modes when one of my family members either arrive or are leaving. I use the companion app for HAAS on our iPhones, and HAAS reports if the person associated with the iPhone enters or leaves the geofenced area around my home. I'm sure most MSR and HAAS users are familiar with this.

I use this rule set mainly as a condition for other rules, however, as part of troubleshooting, a notification is sent through HAAS to the companion app when the rule becomes true. The problem is that I'm getting notifications now for both arriving and departing simultaneously.

96b3f7db-ba09-499e-a78c-86903b603857-image.png

36903cdd-a87f-473b-82ef-af9ef96d3c44-image.png It used to work fine as intended. I'm not sure exactly when it changed, but now I'm getting two notifications when either of these conditions change.

Any idea what could be happening?

Edit:
Running: latest-25082-3c348de6, bare-metal Linux
ZWaveJSControllerr [0.1.25082]

Multi-System Reactor 7 days ago
Problem after upgrading to 25067
R

MSR had been running fine, but I decided to follow the message to upgrade to 25067. Since the upgrade, I have received the message "Controller "<name>" (HubitatController hubitat2) could not be loaded at startup. Its ID is not unique." MSR throws the message on every restart. Has anyone else encountered this problem?
I am running MSR on a Raspberry Pi4 connecting to two Hubitat units over an OpenVPN tunnel. One C8 and a C8 Pro. Both are up-to-date. It appears that despite the error message that MSR may be operating properly.

Multi-System Reactor 12 days ago
Reactor (Multi-System/Multi-Hub) Announcements
T

Build 21228 has been released. Docker images available from DockerHub as usual, and bare-metal packages here.

Home Assistant up to version 2021.8.6 supported; the online version of the manual will now state the current supported versions; Fix an error in OWMWeatherController that could cause it to stop updating; Unify the approach to entity filtering on all hub interface classes (controllers); this works for device entities only; it may be extended to other entities later; Improve error detail in messages for EzloController during auth phase; Add isRuleSet() and isRuleEnabled() functions to expressions extensions; Implement set action for lock and passage capabilities (makes them more easily scriptable in some cases); Fix a place in the UI where 24-hour time was not being displayed.
Multi-System Reactor 14 days ago
Global expressions not always evaluated
T

Similarly as for local expressions, global expressions evaluate and update fine when getEntity(...) structure is used. However, at least when certain functions are in use, expressions do not update.

Consider the following test case:

Screenshot 2025-03-13 at 16.29.42.png

Even though auto-evaluation is active, value does not change (it changes only if that expression is manually run). MSR restarts do not help.

Screenshot 2025-03-13 at 16.31.43.png

Note: Tested using build 25067 on Docker. I have also a PR open (but couldn't now get details or PR number as my Mantis account was somehow expired?).

Multi-System Reactor 14 days ago
[Solved] Local expression evaluation
V

Trying to understand what cause a local expresssion to be evaluated. I have read the manual but I am still not clear about it. Using the test rule below, I can see in the log that the rule is being automatically evaluated every time the temperature entity is changing. That is great...

What I am trying to understand is why the expression is not evaluated based on time as well since the "case" statement has time dependencies.

Any help would be appreciated

I have the following test rule:

eba6a3ea-ff61-4610-88c9-9b9864f11ff8-Screenshot 2025-01-21 095244.png

2d9c1ff5-7b73-4005-b324-9029c2709db9-Screenshot 2025-01-21 095302.png

Here is the expressioncode:

vFrom1 = "09:25:00", vFrom2 = "09:30:00", vFrom3 = "09:41:00", vTo = "10:55:00", # Get current time (format HH:MM:SS) vToDay = strftime("%H:%M:%S"), #Get current house temperature CurrentHouseTemp = getEntity( "hass>Thermostat2 " ).attributes.temperature_sensor.value, case when CurrentHouseTemp <= 19 and vToDay >= vFrom1 && vToDay <= vTo: "true1" # From1 when CurrentHouseTemp <= 20 and vToDay >= vFrom2 && vToDay <= vTo: "true2" # From2 when CurrentHouseTemp < 26  and vToDay >= vFrom3 && vToDay <= vTo: "true3" # From3 else "false" end
Multi-System Reactor 25 days ago
[Solved] Runtime error when exiting global reaction that contains a group
S

I am getting a Runtime error on different browsers when I click exit when editing an existing or creating a new global reaction containing a group. If the global reaction does not have a group I don't get an error. I see a similar post on the forum about a Runtime Error when creating reactions but started a new thread as that appears to be solved.

The Runtime Error is different in the two browsers
Safari v18.3

@http://192.168.10.21:8111/reactor/en-US/lib/js/reaction-list.js:171:44 You may report this error, but do not screen shot it. Copy-paste the complete text. Remember to include a description of the operation you were performing in as much detail as possible. Report using the Reactor Bug Tracker (in your left navigation) or at the SmartHome Community.

Google Chrome 133.0.6943.142

TypeError: self.editor.isModified is not a function at HTMLButtonElement.<anonymous> (http://192.168.10.21:8111/reactor/en-US/lib/js/reaction-list.js:171:34) You may report this error, but do not screen shot it. Copy-paste the complete text. Remember to include a description of the operation you were performing in as much detail as possible. Report using the Reactor Bug Tracker (in your left navigation) or at the SmartHome Community.

Steps to reproduce:
Click the pencil to edit a global reaction with a group.
Click the Exit button.
Runtime error appears.
or
Click Create Reaction
Click Add Action
Select Group
Add Condition such as Entity Attribute.
Add an Action.
Click Save
Click Exit
Runtime error appears.

I don’t know how long the error has been there as I haven’t edited the global reaction in a long time.

Reactor (Multi-hub) latest-25060-f32eaa46
Docker
Mac OS: 15.3.1
Thanks

Multi-System Reactor 27 days ago
Cannot delete Global Expressions
SnowmanS

I am trying to delete a global expression (gLightDelay) but for some strange reason, it comes back despite clicking the Delete this expression and Save Changes buttons.

I have not created a global expression for some times and just noticed this while doing some clean-up.

I have upgraded Reactor to 25067 from 25060 and the behaviour is still there. I have restarted Reactor (as well as restarting its container) and cleared the browser's cache several times without success.

Here's what the log shows.

[latest-25067]2025-03-08T23:50:22.690Z <wsapi:INFO> [WSAPI]wsapi#1 rpc_echo [Object]{ "comment": "UI activity" } [latest-25067]2025-03-08T23:50:26.254Z <GlobalExpression:NOTICE> Deleting global expression gLightDelay [latest-25067]2025-03-08T23:50:27.887Z <wsapi:INFO> [WSAPI]wsapi#1 rpc_echo [Object]{ "comment": "UI activity" }

Reactor latest-25067-62e21a2d
Docker on Synology NAS

Multi-System Reactor 29 days ago
Local notification methods?
CatmanV2C

Morning, experts. Hard on learning about the internet check script in MSR tools, I was wondering what suggestions anyone has about a local (i.e. non-internet dependent) notification method.

This was prompted by yesterday's fun and games with my ISP.

I've got the script Cronned and working properly but short of flashing a light on and off, I'm struggling to think of a way of alerting me (ideally to my phone)

I guess I could set up a Discord server at home, but that feels like overkill for a rare occasion. Any other suggestions?

TIA

C

Multi-System Reactor Feb 14, 2025, 5:08 PM
Custom capabilities in MQTT templates
M

Hi,
I'm trying to integrate the sonos-mqtt (https://sonos2mqtt.svrooij.io/) with the MSR and it's coming along nicely so far.
But cannot wrap my head around how to define custom capabilities in MQTT templates. I need this for the TTS announcements and similarly for the notification sounds where I would pass the sound file as parameter.

So this is what I have in the local_mqtt_devices.yaml

capabilities: x_sonos_announcement: attributes: actions: speak: arguments: text: type: string volume: type: int delay: type: int

And this is the template:

templates: sonos-announcement: capabilities: - x_sonos_announcement actions: x_sonos_announcement: speak: topic: "sonos/cmd/speak" payload: expr: > { "text": parameters.text, "volume": parameters.volume, "delayMs": parameters.delay, "onlyWhenPlaying": false, "engine": "neural" } type: json

So the speak action should send something like this to topic sonos/cmd/speak

{ "text": "message goes here", "volume": 50, "delayMs": 100, "onlyWhenPlaying": false, "engine": "neural" }

At startup the MSR seems to be quite unhappy with my configuration:

reactor | [latest-25016]2025-02-09T08:19:59.029Z <MQTTController:WARN> MQTTController#mqtt entity Entity#mqtt>sonos-announcement unable to configure capabilities [Array][ "x_sonos_announcement" ] reactor | i18n: missing fi-FI language string: Configuration for {0:q} is incomplete because the following requested capabilities are undefined: {1} reactor | i18n: missing fi-FI language string: Configuration for {0:q} has unrecognized capability {1:q} in actions reactor | Trace: Configuration for {0:q} is incomplete because the following requested capabilities are undefined: {1} reactor | at _T (/opt/reactor/server/lib/i18n.js:611:28) reactor | at AlertManager.addAlert (/opt/reactor/server/lib/AlertManager.js:125:25) reactor | at MQTTController.sendWarning (/opt/reactor/server/lib/Controller.js:627:30) reactor | at MQTTController.start (/var/reactor/ext/MQTTController/MQTTController.js:268:26) reactor | at async Promise.allSettled (index 0) Configuration for "sonos-announcement" has unrecognized capability "x_sonos_announcement" in actions Controller: MQTTController#mqtt Last 10:21:37 AM Configuration for "sonos-announcement" is incomplete because the following requested capabilities are undefined: x_sonos_announcement Controller: MQTTController#mqtt Last 10:21:37 AM

This is probably a pretty stupid question and the approach may not even work at all, but maybe someone or @toggledbits for sure, could point me to the right direction.
Basically the idea is to be able to send TTS messages from reactions using entity actions. I've previously used HTTP requests to Sonos HTTP API (https://hub.docker.com/r/chrisns/docker-node-sonos-http-api/) for the same functionality, but since moving to sonos-mqtt, I need a way to send the TTS notifications using MQTTController. Along with the actual message, volume and delay must also be parameterizable.

br,
mgvra

MSR latest-25016-d47fea38 / MQTTController [0.2.24293]

Multi-System Reactor Feb 11, 2025, 1:28 PM
[SOLVED]Hass websocket falsely reporting ready on boot??
V

Hi, @toggledbits

I just noticed that following a reboot of my raspberry pi, some of the rules, that I was expecting to recover, are not catching up following a reboot. I have made a simple test rule (rule-m6rz6ol1) with only "after Date/time" as trigger and "turn on a lamp" as a set reaction. All my infrastructure is on the same board so Reactor, Hass, Zwavejs, ... are all rebooting.

Here is the sequence of the test case (All time converted to Zulu to match logs):

Rule "after Date/Time" set to 14:05:00z Shutdown on Raspberry Pi at 14:04:00z Power back up at 14:08:00z Rule overview shows true as of 14:08:14z waiting for 00:00:00 in GUI

From the log I can see that MSR is picking up the rule and knows that the state of the rule has changed from false to true and tries to send the update to HASS but failed with websocket error.

Here is what I see from the log:

14:04:04z shutdown complete 14:08:08z Power up 14:08:13.111z websocket connection 14:08:15:323z Reaction to the light failed, Websocket not opened After there is a series of websocket connection attempt until 14:08:51z where it seemed to be really ready.

Back in 2021 we had a discussion (https://smarthome.community/topic/700/solved-start-up?_=1738766986566) and you proposed to add a startup_delay:xxxx and startup_wait:xxxx parameter in the engine section of "reactor.yaml". When I try the startup_delay (this used to be a hard delay), the engine failed to start (I think). I then try the startup_wait:xxxx without any success. Since it wait for the connection status to be up to cancel the delay, it does not do anyting since Hass is reporting the socket up without really being up ( I think...).

Questions:

Did I figured it all wrong? should the startup_delay:xxxxx have worked? Any ideas?

Here is the log:

OK now I am stuck. I did add the log but when I submit the editor complained saying that I am limited to 32767 characters. The log from the shutdown to the time the websocket is stable is about 300000 character long. What are my options?

Multi-System Reactor Feb 10, 2025, 7:45 PM
[SOLVED]Logs permissions for Docker Install
V

Not a big issue simply a request if easily doable.

The MSR logs files inside the container are owned by root witch is fine however, the permissions are very restrictive. I do not know if there is something wrong with my installation but the logs permission are set to 222 (write only). Even if the docker volume is set for Read/Write the log files are retaining these values.

I go around the problem by doing a chmod 777 on all reactor logs but every time there is an MSR log rotation the permissions are set back to 222. So unless the permission are implemented in the container there is no permanent solution to this (that I know of).

I do not know much about Docker container so I do not know what is involved here.

Can the logfiles permission be simply chaged in the container to at least allow "other" read permission?

Could the MSR log rotation routine implement a chmod to set the permission?

Just a small anoyance

Thanks

Multi-System Reactor Feb 8, 2025, 6:05 PM
Button.Since Revisited
SnowmanS

@toggledbits In the MSR documentation, under Standard Capabilities, I noticed that the
button.since attribute was deprecated as of version 22256 and the metadata is the preferred way to access the last-modified time of an attribute.

Am I reading this right? Should I stop using it in my rules?

Thanks

Multi-System Reactor Feb 7, 2025, 2:14 AM
[SOLVED] reactor_inet_check script... and containers
G

When on my bare metal RPi with MSR I had a rule that ran every minute to check Internet status via a script in MSR called reactor_inet_check.sh

I've moved to containerized MSR and see in the instructions that this cannot be run from the container.

The script cannot run within the Reactor docker container. If you are using Reactor in a docker container, the script needs to be run by cron or an equivalent facility on the host system (e.g. some systems, like Synology NAS, have separate task managers that may be used to schedule the repeated execution of tasks such as this).

I've put a script on my container host that calls the reator_inet_check.sh script and it isn't erroring... but I still see the internet status within MSR as null.

Before I go diving down the rabbit hole... should this work?

My cronjob on the proxmox host:
909fe6f0-77fd-4734-80a4-c9e354c910b6-image.png

The contents of msr_internet_check_caller.sh
16337528-cf31-4968-bffe-af1149f7103e-image.png

Multi-System Reactor Feb 6, 2025, 1:05 PM
Catch-all lights rule
G

Background: this is a Windows MSR install I've done for our local pool/amenity center just to run some fans and lights (not my daily driver at home). Install went perfectly fine.

Scenario: I want the lights to go on when it's dark enough (even if during a storm, not just after sunset) so I'm using solarRadiation from my weather station to drive that Trigger. Easy stuff.

Issue: sometimes, someone goes in the office and just starts flipping switches and the result can be lights turned on in the daytime or off at night. I'm trying to create a "catch-all" wherein if it is daytime and the lights somehow find their way ON, they will turn themselves back OFF.

I have the following Reaction built:

b30eab5b-5a14-4a3a-8c9a-47e3e7e53dc3-image.png

I also have this Reaction for opposite, ie the lights find themselves turned off after dark and they will turn themselves back on:

5c6946b1-297c-4eb1-9618-74820979df29-image.png

Here are my two rules:

288cba86-f941-4157-86d9-d8e7487905f7-image.png *NOTE that in my manual testing, ie I turn on the light switch at the incorrect time, when the solarRadiation level changes the Lights ON rule flags and shows as SET. On the next change of solarRadiation it goes back to reset again.

My expectation is that Lights OFF rule should see the lights are on, the solarRadiation is above the set limit, and turn them off. Instead, every other run, the ON rule moves to SET and then reset again on the following run.

Logs appear angry:

[latest-25016]2025-01-26T22:03:31.696Z <Engine:INFO> Enqueueing "Lights ON<RESET>" (rule-m6e4ajh7:R) [latest-25016]2025-01-26T22:03:31.712Z <Engine:NOTICE> Starting reaction Lights ON<RESET> (rule-m6e4ajh7:R) [latest-25016]2025-01-26T22:03:31.713Z <Engine:INFO> Lights ON<RESET> all actions completed. [latest-25016]2025-01-26T22:03:42.565Z <wsapi:INFO> client "127.0.0.1#3" closed, code=1001, reason= [latest-25016]2025-01-26T22:03:42.753Z <httpapi:INFO> [HTTPAPI]#1 API request from ::ffff:127.0.0.1: GET /api/v1/lang [latest-25016]2025-01-26T22:03:42.754Z <httpapi:INFO> [HTTPAPI]#1 request for /api/v1/lang from ::ffff:127.0.0.1 user anonymous auth none matches /api/v1/lang ACL (#7): [Object]{ "url": "/api/v1/lang", "allow": true, "index": 7 } [latest-25016]2025-01-26T22:03:42.790Z <wsapi:INFO> wsapi: connection from ::ffff:127.0.0.1 [latest-25016]2025-01-26T22:03:42.839Z <wsapi:INFO> [WSAPI]wsapi#1 client "127.0.0.1#6" authorized [latest-25016]2025-01-26T22:03:43.353Z <httpapi:INFO> [HTTPAPI]#1 API request from ::ffff:127.0.0.1: GET /api/v1/systime [latest-25016]2025-01-26T22:03:43.353Z <httpapi:INFO> [HTTPAPI]#1 request for /api/v1/systime from ::ffff:127.0.0.1 user anonymous auth none matches /api/v1/systime ACL (#5): [Object]{ "url": "/api/v1/systime", "allow": true, "index": 5 } [latest-25016]2025-01-26T22:03:48.146Z <wsapi:INFO> client "127.0.0.1#6" closed, code=1001, reason= [latest-25016]2025-01-26T22:03:48.308Z <httpapi:INFO> [HTTPAPI]#1 API request from ::ffff:127.0.0.1: GET /api/v1/lang [latest-25016]2025-01-26T22:03:48.309Z <httpapi:INFO> [HTTPAPI]#1 request for /api/v1/lang from ::ffff:127.0.0.1 user anonymous auth none matches /api/v1/lang ACL (#7): [Object]{ "url": "/api/v1/lang", "allow": true, "index": 7 } [latest-25016]2025-01-26T22:03:48.346Z <wsapi:INFO> wsapi: connection from ::ffff:127.0.0.1 [latest-25016]2025-01-26T22:03:48.390Z <wsapi:INFO> [WSAPI]wsapi#1 client "127.0.0.1#7" authorized [latest-25016]2025-01-26T22:03:49.412Z <httpapi:INFO> [HTTPAPI]#1 API request from ::ffff:127.0.0.1: GET /api/v1/systime [latest-25016]2025-01-26T22:03:49.413Z <httpapi:INFO> [HTTPAPI]#1 request for /api/v1/systime from ::ffff:127.0.0.1 user anonymous auth none matches /api/v1/systime ACL (#5): [Object]{ "url": "/api/v1/systime", "allow": true, "index": 5 } [latest-25016]2025-01-26T22:03:52.734Z <wsapi:INFO> client "127.0.0.1#7" closed, code=1001, reason= [latest-25016]2025-01-26T22:03:52.891Z <httpapi:INFO> [HTTPAPI]#1 API request from ::ffff:127.0.0.1: GET /api/v1/lang [latest-25016]2025-01-26T22:03:52.892Z <httpapi:INFO> [HTTPAPI]#1 request for /api/v1/lang from ::ffff:127.0.0.1 user anonymous auth none matches /api/v1/lang ACL (#7): [Object]{ "url": "/api/v1/lang", "allow": true, "index": 7 } [latest-25016]2025-01-26T22:03:52.925Z <wsapi:INFO> wsapi: connection from ::ffff:127.0.0.1 [latest-25016]2025-01-26T22:03:52.965Z <wsapi:INFO> [WSAPI]wsapi#1 client "127.0.0.1#8" authorized [latest-25016]2025-01-26T22:03:54.383Z <httpapi:INFO> [HTTPAPI]#1 API request from ::ffff:127.0.0.1: GET /api/v1/systime [latest-25016]2025-01-26T22:03:54.384Z <httpapi:INFO> [HTTPAPI]#1 request for /api/v1/systime from ::ffff:127.0.0.1 user anonymous auth none matches /api/v1/systime ACL (#5): [Object]{ "url": "/api/v1/systime", "allow": true, "index": 5 } [latest-25016]2025-01-26T22:04:01.590Z <wsapi:INFO> [WSAPI]wsapi#1 rpc_echo [Object]{ "comment": "UI activity" } [latest-25016]2025-01-26T22:04:39.646Z <Rule:INFO> Lights OFF (rule-m6e33ja3 in Atrium Lights) evaluated; rule state transition from RESET to SET! [latest-25016]2025-01-26T22:04:39.656Z <Rule:INFO> Lights ON (rule-m6e4ajh7 in Atrium Lights) evaluated; rule state transition from RESET to SET! [latest-25016]2025-01-26T22:04:39.663Z <Engine:INFO> Enqueueing "Lights OFF<SET>" (rule-m6e33ja3:S) [latest-25016]2025-01-26T22:04:39.665Z <Engine:INFO> Enqueueing "Lights ON<SET>" (rule-m6e4ajh7:S) [latest-25016]2025-01-26T22:04:39.668Z <Engine:NOTICE> Starting reaction Lights OFF<SET> (rule-m6e33ja3:S) [latest-25016]2025-01-26T22:04:39.669Z <Engine:NOTICE> Starting reaction Lights ON<SET> (rule-m6e4ajh7:S) [latest-25016]2025-01-26T22:04:39.669Z <Engine:INFO> Lights ON<SET> all actions completed. [latest-25016]2025-01-26T22:04:39.675Z <Rule:INFO> Lights OFF (rule-m6e33ja3 in Atrium Lights) evaluated; rule state transition from SET to RESET! [latest-25016]2025-01-26T22:04:39.680Z <Engine:NOTICE> ReactionHistory: no entry for [latest-25016]2025-01-26T22:04:39.683Z <Engine:NOTICE> [Engine]Engine#1 entry 256 reaction rule-m6e33ja3:S-1q2f1j0p: [Error] terminated [parent terminating] [latest-25016]2025-01-26T22:04:39.683Z <Engine:CRIT> Error: terminated [parent terminating] Error: terminated at Engine._process_reaction_queue (C:\Users\Jalan\msr\reactor\server\lib\Engine.js:1644:47) [latest-25016]2025-01-26T22:04:39.699Z <Engine:NOTICE> [Engine]Engine#1 entry 254 reaction rule-m6e33ja3:S: [Error] terminated [preempted by rule state change] [latest-25016]2025-01-26T22:04:39.699Z <Engine:CRIT> Error: terminated [preempted by rule state change] Error: terminated at Engine._process_reaction_queue (C:\Users\Jalan\msr\reactor\server\lib\Engine.js:1644:47) [latest-25016]2025-01-26T22:04:39.700Z <Engine:INFO> Enqueueing "Lights OFF<RESET>" (rule-m6e33ja3:R) [latest-25016]2025-01-26T22:04:39.704Z <Engine:NOTICE> Starting reaction Lights OFF<RESET> (rule-m6e33ja3:R) [latest-25016]2025-01-26T22:04:39.705Z <Engine:INFO> Lights OFF<RESET> all actions completed. [latest-25016]2025-01-26T22:05:48.822Z <Rule:INFO> Lights ON (rule-m6e4ajh7 in Atrium Lights) evaluated; rule state transition from SET to RESET! [latest-25016]2025-01-26T22:05:48.831Z <Engine:INFO> Enqueueing "Lights ON<RESET>" (rule-m6e4ajh7:R) [latest-25016]2025-01-26T22:05:48.847Z <Engine:NOTICE> Starting reaction Lights ON<RESET> (rule-m6e4ajh7:R) [latest-25016]2025-01-26T22:05:48.847Z <Engine:INFO> Lights ON<RESET> all actions completed.
Multi-System Reactor Jan 29, 2025, 1:47 PM
Throttled problem
wmarcolinW

Hi @toggledbits

I found this very old post that talked about a way to limit device reading to avoid the throttled problem, because it's not a question of logic, it's that the device actually sends a lot of information, in my case the NUT ups installed in HE.

https://smarthome.community/topic/687/flapping-device?_=1737652139854

It mentions engine section of reactor.yaml by setting update_rate_limit, but I looked in the current MSR documentation and I can't find this information, so I don't know if it's still valid, its effect and parameters.

My situation is simple, when I have a UPS problem the NUT is sending dozens of reports per second and then I have the throttled problem. The same rule applies when the power is normal.

This is the rule, and the parameter that fails is the Tripp Lite UPS status.

cf9ddabf-3144-4e5a-80a4-0dc7664b9573-image.png

a813a077-974e-4737-897c-e383085b3d8f-image.png

All error is the same scenario.

[latest-25016]2025-01-23T12:01:32.753Z <Rule:WARN> (13) NUT Disconected (rule-l4djr0p7 in Warning) update rate 121/min exceeds limit (120/min)! Logic loop? Throttl> [latest-25016]2025-01-23T12:01:32.756Z <Rule:WARN> (27) Falta de Energia (rule-l4h9ceod in Warning) update rate 121/min exceeds limit (120/min)! Logic loop? Thrott> [latest-25016]2025-01-23T12:01:32.769Z <Rule:WARN> (73) UPS Battery Low (rule-l4hj850o in Warning) update rate 121/min exceeds limit (120/min)! Logic loop? Throttl> [latest-25016]2025-01-23T12:01:32.772Z <Rule:WARN> (74) UPS Comm Fail (rule-l4kbs5cp in Warning) update rate 121/min exceeds limit (120/min)! Logic loop? Throttlin> [latest-25016]2025-01-23T12:01:32.776Z <Rule:WARN> (76) UPS Utility Back (rule-l4hjhs6m in Warning) update rate 121/min exceeds limit (120/min)! Logic loop? Thrott> [latest-25016]2025-01-23T12:01:32.780Z <Rule:WARN> UPS On Battery (rule-l4hjuka5 in Datacenter) update rate 121/min exceeds limit (120/min)! Logic loop? Throttling> [latest-25016]2025-01-23T12:01:32.781Z <Rule:WARN> UPS Info (rule-l4gheo63 in Datacenter) update rate 121/min exceeds limit (120/min)! Logic loop? Throttling... [latest-25016]2025-01-23T12:01:40.757Z <Rule:WARN> (13) NUT Disconected (rule-l4djr0p7 in Warning) update rate 121/min exceeds limit (120/min)! Logic loop? Throttl> [latest-25016]2025-01-23T12:01:40.759Z <Rule:WARN> (27) Falta de Energia (rule-l4h9ceod in Warning) update rate 121/min exceeds limit (120/min)! Logic loop? Thrott> [latest-25016]2025-01-23T12:01:40.776Z <Rule:WARN> (73) UPS Battery Low (rule-l4hj850o in Warning) update rate 121/min exceeds limit (120/min)! Logic loop? Throttl> [latest-25016]2025-01-23T12:01:40.777Z <Rule:WARN> (74) UPS Comm Fail (rule-l4kbs5cp in Warning) update rate 121/min exceeds limit (120/min)! Logic loop? Throttlin> [latest-25016]2025-01-23T12:01:40.778Z <Rule:WARN> (76) UPS Utility Back (rule-l4hjhs6m in Warning) update rate 121/min exceeds limit (120/min)! Logic loop? Thrott>

Thanks.

Multi-System Reactor Jan 29, 2025, 2:51 AM

Need Testers

Scheduled Pinned Locked Moved Multi-System Reactor
78 Posts 8 Posters 4.3k Views
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • T Offline
    T Offline
    toggledbits
    replied to gwp1 on Apr 28, 2024, 2:27 PM last edited by
    #20

    @gwp1 said in Need Testers:

    I have noticed that the TOOLS>Restart Reactor button does not work

    Make sure you've done a hard refresh on the browser to ensure that it has loaded all the latest files for the UI.

    Failing that, hit F12 (usually) in your browser to open a Developer window, and then hit the Restart button and see if anything gets logged on the browser side.

    Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

    G 1 Reply Last reply Apr 28, 2024, 2:33 PM
    0
    • G Offline
      G Offline
      gwp1
      replied to toggledbits on Apr 28, 2024, 2:33 PM last edited by
      #21

      @toggledbits Completely slipped my mind to approach it from the browers. Derp.

      Yep.

      e45ebd90-f434-458d-8039-f1f1dc616c21-image.png

      Logged in as the default admin with updated pwd.

      *Hubitat C-7 2.4.1.151
      *Proxmox VE v8, Beelink MiniPC 12GBs, SSD

      *HASS 2025.3.4
      w/ ZST10-700 fw 7.18.3

      *Prod MSR in docker/portainer
      MSR: latest-25082-3c348de6
      MQTTController: 24257
      ZWave Controller: 25082

      T 1 Reply Last reply Apr 28, 2024, 3:07 PM
      0
      • T Offline
        T Offline
        tamorgen
        replied to tamorgen on Apr 28, 2024, 2:43 PM last edited by
        #22

        @toggledbits said in Need Testers:

        @tamorgen said in Need Testers:

        I'm not seeing the login.html in the reactorui directory

        Oy. OK. Fresh build is now up.

        @tamorgen said in Need Testers:

        those reactions are hanging.

        I'm running this in my house, not seeing any issues. The engine is the same for 24115 and userauth; they are completely in sync except for the required elements to support user authentication, which has nothing to do with reaction. Still, anything is possible, but I wouldn't be able to discern much without the usual rules still applying: when things aren't going as expected, look at the logs... follow the posting guidelines...

        Slow day at work. I was able to remote into my home server and installed the updated release. The login functions properly, and I'm not seeing the hanging reactions as I was this morning.

        This is really great. Now I can securely access my reactor UI remotely if I have the need. The only thing that would make it better is 2FA, but this is a fantastic update.

        1 Reply Last reply
        0
        • T Offline
          T Offline
          toggledbits
          replied to gwp1 on Apr 28, 2024, 3:07 PM last edited by
          #23

          @gwp1 said in Need Testers:

          Logged in as the default admin

          When you reload the page, do you get any similar errors, specifically for /api/v1/systime? Is the time display in the page header correct (showing both host and browser times)?

          Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

          G 1 Reply Last reply Apr 28, 2024, 3:48 PM
          0
          • G Offline
            G Offline
            gwp1
            replied to toggledbits on Apr 28, 2024, 3:48 PM last edited by
            #24

            @toggledbits no errors for /api/v1/systime and the browser time and system time are identical, perhaps a split second apart as they tick by.

            9d6c4999-7294-46b2-a9fd-a83975a993da-image.png

            *Hubitat C-7 2.4.1.151
            *Proxmox VE v8, Beelink MiniPC 12GBs, SSD

            *HASS 2025.3.4
            w/ ZST10-700 fw 7.18.3

            *Prod MSR in docker/portainer
            MSR: latest-25082-3c348de6
            MQTTController: 24257
            ZWave Controller: 25082

            1 Reply Last reply
            0
            • T Offline
              T Offline
              therealdb
              replied to toggledbits on Apr 28, 2024, 6:31 PM last edited by
              #25

              @toggledbits yep, it's working beautifully 🎉 time to delete some junky code I wrote for the occasion 🙂

              I'll play with AuthN&AuthZ on May 1st, since it's a public holiday here in Italy and rain is forecast.

              --
              On a mission to automate everything.

              My MS Reactor contrib
              My Luup Plug-ins

              T 1 Reply Last reply Apr 28, 2024, 7:29 PM
              0
              • T Offline
                T Offline
                toggledbits
                replied to therealdb on Apr 28, 2024, 7:29 PM last edited by
                #26

                @therealdb said in Need Testers:

                yep, it's working beautifully

                Outstanding. I can apply the same type of fix to MQTTController, so I'll do that.

                Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                1 Reply Last reply
                0
                • G Offline
                  G Offline
                  gwp1
                  replied to gwp1 on Apr 29, 2024, 2:58 AM last edited by gwp1 Apr 28, 2024, 10:59 PM
                  #27

                  @toggledbits I have finally finished up the SSL and am getting this from my local browser:

                  00028a08-e3b7-4e47-95b4-f40a28d3acc7-image.png

                  b4c9fc27-1dc7-489d-a3fa-9317ad14989e-image.png

                  Going to spin this off into it's own thread.

                  *Hubitat C-7 2.4.1.151
                  *Proxmox VE v8, Beelink MiniPC 12GBs, SSD

                  *HASS 2025.3.4
                  w/ ZST10-700 fw 7.18.3

                  *Prod MSR in docker/portainer
                  MSR: latest-25082-3c348de6
                  MQTTController: 24257
                  ZWave Controller: 25082

                  1 Reply Last reply
                  0
                  • T Offline
                    T Offline
                    toggledbits
                    wrote on Apr 29, 2024, 7:00 PM last edited by
                    #28

                    Build 24120

                    • Mostly code cleanup and tightening around application restriction.
                    • Should fix Tools > Restart Reactor issue

                    Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                    1 Reply Last reply
                    0
                    • T Offline
                      T Offline
                      toggledbits
                      wrote on May 1, 2024, 2:33 PM last edited by
                      #29

                      Not hearing a lot of grumbling, which is a Good Thing so far. Any and all feedback welcome. Please comment on the docs, too, if you have anything. On my end, I'm out of things to do on this feature, nothing to add, so I'm just waiting for fixing/tweaking.

                      Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                      1 Reply Last reply
                      0
                      • T Offline
                        T Offline
                        tunnus
                        wrote on May 6, 2024, 7:42 PM last edited by
                        #30

                        @toggledbits thanks for this feature! I sort of had to volunteer as a tester as I originally did a feature request for authentication support...

                        Anyway, seems to work nicely, although only about an hour of testing behind. Will keep you posted if anything unexpected comes up. You could update docs though:

                        "1. Copy the template users.yaml-dist from the dist-config distribution directory to your config directory."

                        --> "1. Copy the template users.yaml-dist from the /opt/reactor/dist-config distribution directory to your config directory. Rename it as users.yaml file."

                        (at least for me as a Docker user it wasn't immediately clear where to find this template)

                        Using MSR on Docker (Synology NAS), having InfluxDB, Grafana & Home Assistant, Hubitat C-8, Zigbee2MQTT

                        P 1 Reply Last reply May 6, 2024, 8:12 PM
                        1
                        • P Offline
                          P Offline
                          Pabla
                          replied to tunnus on May 6, 2024, 8:12 PM last edited by
                          #31

                          @tunnus Yes this would be a good improvement to the docs.. you weren't the only one who made this mistake lol!

                          1 Reply Last reply
                          0
                          • T Offline
                            T Offline
                            tunnus
                            wrote on May 6, 2024, 8:21 PM last edited by tunnus May 6, 2024, 4:40 PM
                            #32

                            well, I actually knew to rename this file, but it took a while to find that template (as I've used MSR container for years now and did not remember the location of dist-config)

                            Using MSR on Docker (Synology NAS), having InfluxDB, Grafana & Home Assistant, Hubitat C-8, Zigbee2MQTT

                            1 Reply Last reply
                            0
                            • N Offline
                              N Offline
                              noelab
                              wrote on May 9, 2024, 10:56 PM last edited by
                              #33

                              Hi, I used Portainer to change the image from latest to userauth and it was easy and thanks for this update!

                              current configuration:
                              Synology NAS/Docker/Reactor (Multi-hub) userauth-24120-7745fb8d

                              unexpected:
                              when I try to log in on http://10.0.0.1:8111/dashboard/ as admin:admin, I'm redirect to reactor http://10.0.0.1:8111/reactor/en-US/ and not to dashboard
                              This happens on Chrome and Edge

                              Features/suggestion that I image:

                              Guest user has access to:
                              all dashboard set to public (homescreen - all public group tile - all public single tile)

                              where group tile are rooms/hubs/virtual/weather on homescreen dashboard
                              and single tile are all the entities: devices/virtual devices/etc

                              Admin can use option on tile VISIBLE/HIDDEN icon by clicking on it.

                              If a tile is set to HIDDEN, all entities associated with it will also be hidden. Setting VISIBLE on specific entities will not be respected. Setting hidden on specific entities it will be not visible to guests.
                              So Public means VISIBLE.

                              imaging it:

                              image.png

                              -Reactor (Multi-hub) 25082-3c348de6
                              -Docker on Synology NAS
                              -Ezlo firmware version 2.0.59.2471.8
                              -HASS Docker 2025.2.5
                              -ZWaveJSUI 10.1.3
                              -Update 30/03/2025

                              1 Reply Last reply
                              0
                              • T Offline
                                T Offline
                                tunnus
                                wrote on May 10, 2024, 12:23 PM last edited by tunnus May 10, 2024, 8:25 AM
                                #34

                                Not sure if others are experiencing the same, but with this build (userauth-24120-7745fb8d) if I go to Manual (i.e. http://reactor-ip:8111/docs/), it takes a very long time before search can be used as it stays in "initializing search" state. At least I haven't noticed the same with earlier releases. Browser is Chrome.

                                Screenshot 2024-05-10 at 13.45.49.png

                                Using MSR on Docker (Synology NAS), having InfluxDB, Grafana & Home Assistant, Hubitat C-8, Zigbee2MQTT

                                T 1 Reply Last reply May 11, 2024, 7:02 PM
                                0
                                • T Offline
                                  T Offline
                                  tunnus
                                  wrote on May 10, 2024, 5:45 PM last edited by
                                  #35

                                  @toggledbits another thing noticed with this build is that deleting global reactions does not work.

                                  How to reproduce:

                                  1. create reaction
                                  2. delete it
                                  3. refresh browser
                                  4. reaction is back...

                                  Using MSR on Docker (Synology NAS), having InfluxDB, Grafana & Home Assistant, Hubitat C-8, Zigbee2MQTT

                                  T 1 Reply Last reply May 10, 2024, 8:31 PM
                                  0
                                  • T Offline
                                    T Offline
                                    toggledbits
                                    replied to tunnus on May 10, 2024, 8:31 PM last edited by toggledbits May 10, 2024, 4:32 PM
                                    #36

                                    @tunnus said in Need Testers:

                                    noticed with this build is that deleting global reactions does not work.

                                    I see it. It's also happening to latest-24115. I've got it fixed on my end and will roll a build on Sunday.

                                    @noelab said in Need Testers:

                                    when I try to log in on http://10.0.0.1:8111/dashboard/ as admin:admin, I'm redirect to reactor http://10.0.0.1:8111/reactor/en-US/ and not to dashboard

                                    I think I've got that nailed down as well. Look for Sunday's build.

                                    @Pabla said in Need Testers:

                                    Yes this would be a good improvement to the docs

                                    I think better still, have Reactor docker containers copy dist-config to your data directory (as dist-config, not overwriting any existing real config), so no special steps are needed to find those files, they are just there. Sunday's build.

                                    Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                                    1 Reply Last reply
                                    👍
                                    1
                                    • T Offline
                                      T Offline
                                      tunnus
                                      replied to tunnus on May 11, 2024, 7:02 PM last edited by tunnus May 11, 2024, 3:04 PM
                                      #37

                                      @tunnus said in Need Testers:

                                      Not sure if others are experiencing the same, but with this build (userauth-24120-7745fb8d) if I go to Manual (i.e. http://reactor-ip:8111/docs/), it takes a very long time before search can be used as it stays in "initializing search" state. At least I haven't noticed the same with earlier releases. Browser is Chrome.

                                      Screenshot 2024-05-10 at 13.45.49.png

                                      Anyone else noticed this? @noelab, @Pabla? Other thing I found out today was that there's some kind of a log problem going on, Docker logs claim that reactor.log file cannot be found:

                                      2024/05/11 21:48:36	stdout	stream /var/reactor/logs/reactor.log not open boolean false
2024/05/11 21:48:32	stdout	[Reactor Log Panic] FileLogStream("/var/reactor/logs/reactor.log") error: Error [ERR_STREAM_WRITE_AFTER_END]: write after end
2024/05/11 21:48:32	stdout	stream /var/reactor/logs/reactor.log not open boolean false
2024/05/11 21:48:32	stdout	/var/reactor/logs/reactor.log not found; reopening stream
2024/05/11 21:48:32	stdout	/var/reactor/logs/reactor.log not found; reopening stream
2024/05/11 21:48:32	stdout	/var/reactor/logs/reactor.log not found; reopening stream
2024/05/11 21:48:32	stdout	/var/reactor/logs/reactor.log not found; reopening stream
2024/05/11 21:48:32	stdout	/var/reactor/logs/reactor.log not found; reopening stream
2024/05/11 21:48:32	stdout	/var/reactor/logs/reactor.log size hit rotation limit, rotating
2024/05/11 21:48:09	stdout	stream /var/reactor/logs/reactor.log not open boolean false
2024/05/11 21:48:08	stdout	[Reactor Log Panic] FileLogStream("/var/reactor/logs/reactor.log") error: Error [ERR_STREAM_WRITE_AFTER_END]: write after end
2024/05/11 21:48:08	stdout	stream /var/reactor/logs/reactor.log not open boolean false
2024/05/11 21:48:08	stdout	/var/reactor/logs/reactor.log not found; reopening stream
2024/05/11 21:48:08	stdout	/var/reactor/logs/reactor.log not found; reopening stream
2024/05/11 21:48:08	stdout	/var/reactor/logs/reactor.log not found; reopening stream
2024/05/11 21:48:08	stdout	/var/reactor/logs/reactor.log size hit rotation limit, rotating
2024/05/11 21:46:50	stdout	stream /var/reactor/logs/reactor.log not open boolean false
2024/05/11 21:46:45	stdout	[Reactor Log Panic] FileLogStream("/var/reactor/logs/reactor.log") error: Error [ERR_STREAM_WRITE_AFTER_END]: write after end
2024/05/11 21:46:45	stdout	stream /var/reactor/logs/reactor.log not open boolean false
2024/05/11 21:46:45	stdout	/var/reactor/logs/reactor.log not found; reopening stream
2024/05/11 21:46:45	stdout	/var/reactor/logs/reactor.log not found; reopening stream
2024/05/11 21:46:45	stdout	/var/reactor/logs/reactor.log not found; reopening stream
2024/05/11 21:46:45	stdout	/var/reactor/logs/reactor.log not found; reopening stream
2024/05/11 21:46:45	stdout	/var/reactor/logs/reactor.log not found; reopening stream
2024/05/11 21:46:45	stdout	/var/reactor/logs/reactor.log not found; reopening stream
2024/05/11 21:46:45	stdout	/var/reactor/logs/reactor.log not found; reopening stream
2024/05/11 21:46:45	stdout	/var/reactor/logs/reactor.log not found; reopening stream
2024/05/11 21:46:45	stdout	/var/reactor/logs/reactor.log not found; reopening stream
2024/05/11 21:46:45	stdout	/var/reactor/logs/reactor.log not found; reopening stream
2024/05/11 21:46:45	stdout	/var/reactor/logs/reactor.log not found; reopening stream
2024/05/11 21:46:45	stdout	/var/reactor/logs/reactor.log not found; reopening stream

                                      But reactor.log file seems to in place when checked via terminal:

                                      Screenshot 2024-05-11 at 21.54.08.png

                                      Using MSR on Docker (Synology NAS), having InfluxDB, Grafana & Home Assistant, Hubitat C-8, Zigbee2MQTT

                                      N P 2 Replies Last reply May 11, 2024, 9:22 PM
                                      0
                                      • N Offline
                                        N Offline
                                        noelab
                                        replied to tunnus on May 11, 2024, 9:22 PM last edited by
                                        #38

                                        @tunnus yes, some problem here too from the reactor log in container manager. Hope this may help too:

                                        2024/05/08 21:20:46	stdout	stream /var/reactor/logs/reactor.log not open boolean false
2024/05/08 21:20:46	stdout	/var/reactor/logs/reactor.log not found; reopening stream
2024/05/08 21:20:46	stdout	[Reactor Log Panic] FileLogStream("/var/reactor/logs/reactor.log") error: Error [ERR_STREAM_WRITE_AFTER_END]: write after end
2024/05/08 21:20:46	stdout	/var/reactor/logs/reactor.log size hit rotation limit, rotating
2024/05/08 21:20:46	stdout	[userauth-24120]2024-05-08T19:20:46.401Z <Timer:null> Timer#rule-lq5rhax4 just a note: I'm setting a delay of only 7ms (from 1715196046401<5/8/2024, 9:20:46 PM> to 1715196046408<5/8/2024, 9:20:46 PM>)
2024/05/08 21:20:45	stdout	[userauth-24120]2024-05-08T19:20:45.347Z <Timer:null> Timer#rule-lq1iq5i3 just a note: I'm setting a delay of only 8ms (from 1715196045347<5/8/2024, 9:20:45 PM> to 1715196045355<5/8/2024, 9:20:45 PM>)
2024/05/08 21:20:42	stdout	[userauth-24120]2024-05-08T19:20:42.093Z <Timer:null> Timer#rule-lq5ri09p just a note: I'm setting a delay of only 8ms (from 1715196042093<5/8/2024, 9:20:42 PM> to 1715196042101<5/8/2024, 9:20:42 PM>)
2024/05/08 21:19:04	stdout	[userauth-24120]2024-05-08T19:19:04.547Z <Timer:null> Timer#rule-lq5rgx5t just a note: I'm setting a delay of only 8ms (from 1715195944547<5/8/2024, 9:19:04 PM> to 1715195944555<5/8/2024, 9:19:04 PM>)
2024/05/08 21:19:02	stdout	[userauth-24120]2024-05-08T19:19:02.765Z <Timer:null> Timer#rule-lq5rhvua just a note: I'm setting a delay of only 8ms (from 1715195942765<5/8/2024, 9:19:02 PM> to 1715195942773<5/8/2024, 9:19:02 PM>)
2024/05/08 21:19:02	stdout	[userauth-24120]2024-05-08T19:19:02.153Z <EzloController:null> remapped item action to [Object]{ "item": "switch", "value": true, "method": "hub.item.value.set", "parameters": { "value": { "value": true } } }
2024/05/08 21:19:01	stdout	[userauth-24120]2024-05-08T19:19:01.110Z <Timer:null> Timer#rule-lq5qgdau just a note: I'm setting a delay of only 8ms (from 1715195941110<5/8/2024, 9:19:01 PM> to 1715195941118<5/8/2024, 9:19:01 PM>)
2024/05/08 21:18:59	stdout	[userauth-24120]2024-05-08T19:18:59.226Z <Timer:null> Timer#rule-lq5rh750 just a note: I'm setting a delay of only 8ms (from 1715195939226<5/8/2024, 9:18:59 PM> to 1715195939234<5/8/2024, 9:18:59 PM>)
2024/05/08 21:17:10	stdout	[userauth-24120]2024-05-08T19:17:10.678Z <Timer:null> Timer#rule-lq5rhax4 just a note: I'm setting a delay of only 8ms (from 1715195830678<5/8/2024, 9:17:10 PM> to 1715195830686<5/8/2024, 9:17:10 PM>)
2024/05/08 21:14:44	stdout	[userauth-24120]2024-05-08T19:14:44.540Z <Timer:null> Timer#rule-lq5rh750 just a note: I'm setting a delay of only 8ms (from 1715195684540<5/8/2024, 9:14:44 PM> to 1715195684548<5/8/2024, 9:14:44 PM>)
2024/05/08 21:09:18	stdout	[userauth-24120]2024-05-08T19:09:18.150Z <Timer:null> Timer#rule-lq5rhax4 just a note: I'm setting a delay of only 8ms (from 1715195358150<5/8/2024, 9:09:18 PM> to 1715195358158<5/8/2024, 9:09:18 PM>)
2024/05/08 21:05:44	stdout	[userauth-24120]2024-05-08T19:05:44.738Z <Timer:null> Timer#rule-ks56ms0b just a note: I'm setting a delay of only 8ms (from 1715195144738<5/8/2024, 9:05:44 PM> to 1715195144746<5/8/2024, 9:05:44 PM>)
2024/05/08 21:05:44	stdout	[userauth-24120]2024-05-08T19:05:44.719Z <Timer:null> Timer#rule-lq5rh750 just a note: I'm setting a delay of only 8ms (from 1715195144719<5/8/2024, 9:05:44 PM> to 1715195144727<5/8/2024, 9:05:44 PM>)
2024/05/08 21:00:16	stdout	stream /var/reactor/logs/reactor.log not open boolean false
2024/05/08 21:00:14	stdout	/var/reactor/logs/reactor.log not found; reopening stream
2024/05/08 21:00:12	stdout	[Reactor Log Panic] FileLogStream("/var/reactor/logs/reactor.log") error: Error [ERR_STREAM_WRITE_AFTER_END]: write after end
2024/05/08 21:00:12	stdout	/var/reactor/logs/reactor.log not found; reopening stream
2024/05/08 21:00:12	stdout	/var/reactor/logs/reactor.log not found; reopening stream
2024/05/08 21:00:12	stdout	/var/reactor/logs/reactor.log not found; reopening stream
2024/05/08 21:00:12	stdout	/var/reactor/logs/reactor.log not found; reopening stream
2024/05/08 21:00:12	stdout	/var/reactor/logs/reactor.log not found; reopening stream
2024/05/08 21:00:12	stdout	/var/reactor/logs/reactor.log not found; reopening stream
2024/05/08 21:00:12	stdout	/var/reactor/logs/reactor.log not found; reopening stream
2024/05/08 21:00:12	stdout	/var/reactor/logs/reactor.log not found; reopening stream
2024/05/08 21:00:12	stdout	/var/reactor/logs/reactor.log not found; reopening stream
2024/05/08 21:00:12	stdout	/var/reactor/logs/reactor.log not found; reopening stream
2024/05/08 21:00:12	stdout	/var/reactor/logs/reactor.log not found; reopening stream
2024/05/08 21:00:12	stdout	/var/reactor/logs/reactor.log not found; reopening stream
2024/05/08 21:00:12	stdout	/var/reactor/logs/reactor.log not found; reopening stream
2024/05/08 21:00:12	stdout	/var/reactor/logs/reactor.log not found; reopening stream
2024/05/08 21:00:12	stdout	/var/reactor/logs/reactor.log not found; reopening stream
2024/05/08 21:00:12	stdout	/var/reactor/logs/reactor.log size hit rotation limit, rotating
2024/05/08 20:59:52	stdout	[userauth-24120]2024-05-08T18:59:52.886Z <Timer:null> Timer#rule-lq5rhax4 just a note: I'm setting a delay of only 8ms (from 1715194792886<5/8/2024, 8:59:52 PM> to 1715194792894<5/8/2024, 8:59:52 PM>)
2024/05/08 20:58:22	stdout	[userauth-24120]2024-05-08T18:58:22.585Z <Timer:null> Timer#rule-lq5rh750 just a note: I'm setting a delay of only 8ms (from 1715194702585<5/8/2024, 8:58:22 PM> to 1715194702593<5/8/2024, 8:58:22 PM>)
2024/05/08 20:56:26	stdout	[userauth-24120]2024-05-08T18:56:26.917Z <Timer:null> Timer#rule-lq5rh1ns just a note: I'm setting a delay of only 8ms (from 1715194586917<5/8/2024, 8:56:26 PM> to 1715194586925<5/8/2024, 8:56:26 PM>)
2024/05/08 20:56:06	stdout	[userauth-24120]2024-05-08T18:56:06.581Z <Timer:null> Timer#rule-lq1iq5i3 just a note: I'm setting a delay of only 8ms (from 1715194566581<5/8/2024, 8:56:06 PM> to 1715194566589<5/8/2024, 8:56:06 PM>)
2024/05/08 20:54:49	stdout	[userauth-24120]2024-05-08T18:54:49.514Z <Timer:null> Timer#rule-lq5rgx5t just a note: I'm setting a delay of only 8ms (from 1715194489514<5/8/2024, 8:54:49 PM> to 1715194489522<5/8/2024, 8:54:49 PM>)
2024/05/08 20:54:49	stdout	[userauth-24120]2024-05-08T18:54:49.058Z <Timer:null> Timer#rule-lq5qgdau just a note: I'm setting a delay of only 8ms (from 1715194489058<5/8/2024, 8:54:49 PM> to 1715194489066<5/8/2024, 8:54:49 PM>)
2024/05/08 20:54:43	stdout	[userauth-24120]2024-05-08T18:54:43.027Z <Timer:null> Timer#rule-lq5qgdau just a note: I'm setting a delay of only 8ms (from 1715194483027<5/8/2024, 8:54:43 PM> to 1715194483035<5/8/2024, 8:54:43 PM>)
2024/05/08 20:50:44	stdout	[userauth-24120]2024-05-08T18:50:44.225Z <Timer:null> Timer#rule-lq5rh750 just a note: I'm setting a delay of only 8ms (from 1715194244225<5/8/2024, 8:50:44 PM> to 1715194244233<5/8/2024, 8:50:44 PM>)
2024/05/08 20:50:43	stdout	[userauth-24120]2024-05-08T18:50:43.256Z <EzloController:null> remapped item action to [Object]{ "item": "dimmer", "value_expr": "min(100,max(0,floor(parameters.level*100+0.5)))", "method": "hub.item.value.set", "parameters": { "value": { "value_expr": "min(100,max(0,floor(parameters.level*100+0.5)))" } } }
2024/05/08 20:47:23	stdout	[userauth-24120]2024-05-08T18:47:23.713Z <Timer:null> Timer#rule-ks56ms0b just a note: I'm setting a delay of only 8ms (from 1715194043713<5/8/2024, 8:47:23 PM> to 1715194043721<5/8/2024, 8:47:23 PM>)
2024/05/08 20:47:23	stdout	[userauth-24120]2024-05-08T18:47:23.693Z <Timer:null> Timer#rule-lq5rhax4 just a note: I'm setting a delay of only 8ms (from 1715194043693<5/8/2024, 8:47:23 PM> to 1715194043701<5/8/2024, 8:47:23 PM>)
2024/05/08 20:47:22	stdout	[userauth-24120]2024-05-08T18:47:22.392Z <EzloController:null> remapped item action to [Object]{ "item": "switch", "value": false, "method": "hub.item.value.set", "parameters": { "value": { "value": false } } }
2024/05/08 20:46:10	stdout	[userauth-24120]2024-05-08T18:46:09.716Z <default:null> Module NotifyAlert v21092
2024/05/08 20:46:10	stdout	stream /var/reactor/logs/reactor.log not open boolean false
2024/05/08 20:46:10	stdout	[userauth-24120]2024-05-08T18:46:09.704Z <default:null> Module NotifyPushover v21195
2024/05/08 20:46:10	stdout	[Reactor Log Panic] FileLogStream("/var/reactor/logs/reactor.log") error: Error [ERR_STREAM_WRITE_AFTER_END]: write after end
2024/05/08 20:46:10	stdout	[Reactor Log Panic] FileLogStream("/var/reactor/logs/reactor.log") error: Error [ERR_STREAM_WRITE_AFTER_END]: write after end
2024/05/08 20:46:10	stdout	stream /var/reactor/logs/reactor.log not open boolean false
2024/05/08 20:46:10	stdout	stream /var/reactor/logs/reactor.log not open boolean false
2024/05/08 20:46:10	stdout	/var/reactor/logs/reactor.log not found; reopening stream
2024/05/08 20:46:10	stdout	/var/reactor/logs/reactor.log not found; reopening stream
2024/05/08 20:46:10	stdout	/var/reactor/logs/reactor.log not found; reopening stream
2024/05/08 20:46:10	stdout	/var/reactor/logs/reactor.log size hit rotation limit, rotating
2024/05/08 20:46:09	stdout	[userauth-24120]2024-05-08T18:46:09.014Z <Notifier:null> Module Notifier v22283
2024/05/08 20:46:06	stdout	    at /opt/reactor/server/lib/VirtualEntityController.js:357:319
2024/05/08 20:46:06	stdout	    at VirtualEntityController._load_devices (/opt/reactor/server/lib/VirtualEntityController.js:644:114)
2024/05/08 20:46:06	stdout	    at Entity.setPrimaryAttribute (/opt/reactor/server/lib/Entity.js:563:19)
2024/05/08 20:46:06	stdout	Error: Invalid primary attribute assignment; capability not assigned (state_sensor.value)
2024/05/08 20:46:06	stdout	[userauth-24120]2024-05-08T18:46:06.542Z <VirtualEntityController:CRIT> Error: Invalid primary attribute assignment; capability not assigned (state_sensor.value) [-]
2024/05/08 20:46:06	stdout	    at /opt/reactor/server/lib/VirtualEntityController.js:357:319
2024/05/08 20:46:06	stdout	    at VirtualEntityController._load_devices (/opt/reactor/server/lib/VirtualEntityController.js:644:114)
2024/05/08 20:46:06	stdout	    at Entity.setPrimaryAttribute (/opt/reactor/server/lib/Entity.js:563:19)
2024/05/08 20:46:06	stdout	Error: Invalid primary attribute assignment; capability not assigned (string_sensor.value)
2024/05/08 20:46:06	stdout	[userauth-24120]2024-05-08T18:46:06.541Z <VirtualEntityController:CRIT> Error: Invalid primary attribute assignment; capability not assigned (string_sensor.value) [-]
2024/05/08 20:46:05	stdout	[userauth-24120]2024-05-08T18:46:05.410Z <VirtualEntityController:null> Module VirtualEntityController v24117
2024/05/08 20:46:05	stdout	[userauth-24120]2024-05-08T18:46:05.391Z <SystemController:null> Module SystemController v24076
2024/05/08 20:46:05	stdout	[userauth-24120]2024-05-08T18:46:05.382Z <OWMWeatherController:null> Module OWMWeatherController v22294
2024/05/08 20:46:05	stdout	[userauth-24120]2024-05-08T18:46:05.161Z <EzloController:null> Module EzloController v23345
2024/05/08 20:46:05	stdout	[userauth-24120]2024-05-08T18:46:05.090Z <VeraController:null> Module VeraController v24050
2024/05/08 20:46:05	stdout	[userauth-24120]2024-05-08T18:46:05.089Z <TaskQueue:null> Module TaskQueue 24113
2024/05/08 20:46:05	stdout	[userauth-24120]2024-05-08T18:46:04.993Z <HassController:null> Module HassController v24115
2024/05/08 20:46:05	stdout	[userauth-24120]2024-05-08T18:46:04.726Z <InfluxFeed:null> Module InfluxFeed v23341
2024/05/08 20:46:05	stdout	[userauth-24120]2024-05-08T18:46:04.682Z <wsapi:null> Module wsapi v24115
2024/05/08 20:46:05	stdout	[userauth-24120]2024-05-08T18:46:04.439Z <httpapi:null> Module httpapi v24119
2024/05/08 20:46:05	stdout	[userauth-24120]2024-05-08T18:46:04.231Z <Engine:null> Module Engine v24113
2024/05/08 20:46:05	stdout	[userauth-24120]2024-05-08T18:46:04.229Z <GlobalReaction:null> Module GlobalReaction v24099
2024/05/08 20:46:05	stdout	[userauth-24120]2024-05-08T18:46:04.197Z <Rule:null> Module Rule v24115
2024/05/08 20:46:05	stdout	[userauth-24120]2024-05-08T18:46:04.176Z <AlertManager:null> Module AlertManager v24099
2024/05/08 20:46:05	stdout	[userauth-24120]2024-05-08T18:46:04.107Z <Predicate:null> Module Predicate v23093
2024/05/08 20:46:05	stdout	[userauth-24120]2024-05-08T18:46:04.045Z <GlobalExpression:null> Module GlobalExpression v24099
2024/05/08 20:46:05	stdout	[userauth-24120]2024-05-08T18:46:04.023Z <default:null> Module Rulesets v24099
2024/05/08 20:46:05	stdout	[userauth-24120]2024-05-08T18:46:04.022Z <default:null> Module Ruleset v24099
2024/05/08 20:46:05	stdout	[userauth-24120]2024-05-08T18:46:03.952Z <Controller:null> Module Controller v24099
2024/05/08 20:46:05	stdout	[userauth-24120]2024-05-08T18:46:03.929Z <Entity:null> Module Entity v24108
2024/05/08 20:46:05	stdout	[userauth-24120]2024-05-08T18:46:03.925Z <TimerBroker:null> Module TimerBroker v22283
2024/05/08 20:46:05	stdout	[userauth-24120]2024-05-08T18:46:03.460Z <Plugin:null> Module Plugin v22300
2024/05/08 20:46:05	stdout	[userauth-24120]2024-05-08T18:46:03.311Z <Capabilities:null> Module Capabilities v23331
2024/05/08 20:46:03	stdout	[userauth-24120]2024-05-08T18:46:03.269Z <Structure:null> Module Structure v24110
2024/05/08 20:46:03	stdout	[userauth-24120]2024-05-08T18:46:03.059Z <app:null> Local date/time using configured timezone and locale formatting is "5/8/2024, 8:46:03 PM"
2024/05/08 20:46:03	stdout	[userauth-24120]2024-05-08T18:46:03.058Z <app:null> Loaded locale en-US for en-US
2024/05/08 20:46:02	stdout	[userauth-24120]2024-05-08T18:46:02.890Z <app:null> Configured locale (undefined); selected locale(s) en-US.UTF-8
2024/05/08 20:46:02	stdout	[userauth-24120]2024-05-08T18:46:02.750Z <app:null> Resolved timezone=Europe/Rome, environment TZ=Europe/Rome; offset minutes from UTC=120
2024/05/08 20:46:02	stdout	[userauth-24120]2024-05-08T18:46:02.656Z <app:null> NODE_PATH=/opt/reactor:/opt/reactor/node_modules
2024/05/08 20:46:02	stdout	[userauth-24120]2024-05-08T18:46:02.656Z <app:null> Basedir /opt/reactor; data in /var/reactor/storage
2024/05/08 20:46:02	stdout	[userauth-24120]2024-05-08T18:46:02.656Z <app:null> Process ID 1 user/group 0/0; docker; platform linux/x64 #69057 SMP Fri Jan 12 17:02:28 CST 2024; locale (undefined)
2024/05/08 20:46:02	stdout	[userauth-24120]2024-05-08T18:46:02.584Z <app:null> Reactor build userauth-24120-7745fb8d starting on v20.10.0 /usr/local/bin/node
2024/05/08 20:46:02	stdout	NODE_PATH /opt/reactor:/opt/reactor/node_modules
2024/05/08 20:46:02	stdout	Reactor userauth-24120-7745fb8d app 24120 configuration from /var/reactor/config

                                        -Reactor (Multi-hub) 25082-3c348de6
                                        -Docker on Synology NAS
                                        -Ezlo firmware version 2.0.59.2471.8
                                        -HASS Docker 2025.2.5
                                        -ZWaveJSUI 10.1.3
                                        -Update 30/03/2025

                                        1 Reply Last reply
                                        0
                                        • T Offline
                                          T Offline
                                          toggledbits
                                          wrote on May 12, 2024, 12:55 AM last edited by
                                          #39

                                          It looks like you may have a misconfiguration in your VirtualEntityController config. Can you post the config section for that?

                                          Author of Multi-system Reactor and Reactor, DelayLight, Switchboard, and about a dozen other plugins that run on Vera and openLuup.

                                          N 1 Reply Last reply May 12, 2024, 6:10 AM
                                          0

                                          29/78

                                          May 1, 2024, 2:33 PM

                                          Recent Topics

                                          • Need help reducing false positive notifications
                                            T
                                            toggledbits
                                            about 7 hours ago
                                            0
                                            6
                                            45
                                          • Help me with a Smart Home Interview – US Participants Needed
                                            I
                                            Ivan_Razin
                                            3 days ago
                                            0
                                            1
                                            36
                                          • MQTT configuration question
                                            T
                                            tunnus
                                            3 days ago
                                            0
                                            11
                                            237
                                          • System Configuration Check - time is offset
                                            G
                                            gwp1
                                            4 days ago
                                            0
                                            8
                                            83
                                          • Programmatically capture HTTP Request action status code or error
                                            T
                                            therealdb
                                            6 days ago
                                            0
                                            3
                                            75
                                          • ZwaveJSUI - RGBWW BULB - Warm/Cold White interfered with RGB settings - Bulb doesn't change color if in WarmWhite state.
                                            T
                                            toggledbits
                                            7 days ago
                                            0
                                            9
                                            283
                                          • Problem with simultaneous notifications.
                                            T
                                            tamorgen
                                            7 days ago
                                            0
                                            1
                                            53
                                          • Problem after upgrading to 25067
                                            R
                                            retireditguy
                                            12 days ago
                                            0
                                            4
                                            170
                                          • Reactor (Multi-System/Multi-Hub) Announcements
                                            T
                                            toggledbits
                                            14 days ago
                                            5
                                            119
                                            17.0k
                                          • Global expressions not always evaluated
                                            T
                                            tunnus
                                            14 days ago
                                            0
                                            3
                                            129
                                          • [Solved] Local expression evaluation
                                            T
                                            tunnus
                                            25 days ago
                                            0
                                            13
                                            402
                                          • [Solved] Runtime error when exiting global reaction that contains a group
                                            G
                                            gwp1
                                            27 days ago
                                            0
                                            7
                                            563
                                          Powered by NodeBB | Contributors
                                          Hosted freely by 10RUPTiV - Solutions Technologiques | Contact us
                                          • Login
                                          • Don't have an account? Register
                                          • Login or register to search.
                                          29 out of 78
                                          • First post
                                            29/78
                                            Last post
                                          0
                                          • Categories
                                          • Recent
                                          • Tags
                                          • Popular
                                          • Unsolved