-
Hello Everyone -
I have a peculiar situation that I'm hoping to get some help with.
Running Vera which is still handling my Zwave, MySensors, Zigbee, and still a balance of my Reactors.
However, I've also been running MSR for several months in preparation for an eventual move off of Vera.
Vera had one of its meltdowns this morning related to my Opensprinkler plug in.
After getting that straightened out, I added the OpenSprinkler plugin to HAAS and that's when I started having issues.
My existing MSR reactors (even simple ones) don't seem to fire their reactions. I can see the conditions go "true". If I manually fire the Reaction, it works fine.
I do see this a lot in the logs:
[1.0.2-21350]2022-05-16T19:02:44.518Z <Rule:INFO> Rule#rule-460 evaluation in progress; waiting for completion(Various rules - 460 is just an example)
Is there anything I can do to further troubleshoot?
-
Build 21228 has been released. Docker images available from DockerHub as usual, and bare-metal packages here.
Home Assistant up to version 2021.8.6 supported; the online version of the manual will now state the current supported versions; Fix an error in OWMWeatherController that could cause it to stop updating; Unify the approach to entity filtering on all hub interface classes (controllers); this works for device entities only; it may be extended to other entities later; Improve error detail in messages for EzloController during auth phase; Add isRuleSet() and isRuleEnabled() functions to expressions extensions; Implement set action for lock and passage capabilities (makes them more easily scriptable in some cases); Fix a place in the UI where 24-hour time was not being displayed. -
My MSR has been working flawlessly until a couple of days ago when it stopped sending Telegram Messages (or should I say they stopped getting through!). I have updated to MSR version 22004. The reactor.log is updating and is showing no errors:
[latest-22004]2022-05-15T17:52:31.417Z Engine:NOTICE Starting reaction Message Test (re-l37h2fkj)
[latest-22004]2022-05-15T17:52:31.417Z Engine:INFO Message Test all actions completed.
[latest-22004]2022-05-15T17:52:31.704Z Engine:INFO Enqueueing "Message Test" (re-l37h2fkj)
[latest-22004]2022-05-15T17:52:31.735Z Engine:NOTICE Starting reaction Message Test (re-l37h2fkj)
[latest-22004]2022-05-15T17:52:31.736Z Engine:INFO Message Test all actions completed.
[latest-22004]2022-05-15T17:52:32.007Z Engine:INFO Enqueueing "Message Test" (re-l37h2fkj)
[latest-22004]2022-05-15T17:52:32.035Z Engine:NOTICE Starting reaction Message Test (re-l37h2fkj)
[latest-22004]2022-05-15T17:52:32.036Z Engine:INFO Message Test all actions completed.
[latest-22004]2022-05-15T17:52:41.324Z Engine:INFO Enqueueing "Variable Telegram Test" (re-kvnm57c3)If I use the following in my web browser the telegram message gets through:
https://api.telegram.org/botxxxxx......./sendMessage?chat_id=xxxxx......&text=Test Message HTTPS
I am running MSR on my QNAP network attached storage. Any assistance would be appreciated.
Just another question...... I would like to post in the HOME HARDWARE VERA section of Smarthome, but I do not have the option to set up a new post. Do I need to request access for this?
-
Details of runtime environment:
Reactor (Multi-hub) stable-22055-9b40e12 Running as a service on Windows Server 2022 Std 21H2 Connecting to HASS (HASSOS) Is a migration WIP from OpenLuup/ReactorA complete description of your objective:
Using LetsEncrypt, application "certifyTheWeb", retrieve and apply SSL certificate to Multi System ReactorA description of your approach/solution/implementation so far:
Reviewed Config files, can't seen mention of certificate files in thereActual Question:
How do I apply a certificate to whatever web server Reactor uses? I'm familiar with managing certificates on IIS and Apache but Reactor doesn't use either of these and I have not been able to locat ethe config file that Reactor uses for this. Which config file needs editing to apply a certificate? Does it use the computer certificate store or it's own store (e.g. pem files)The reason I want to achieve this, other than the general goodness of having everything I can in TLS is that I have Reactor as an IFRAME in my HASS console and as HASS is HTTPS and Reactor is HTTP then the iframe refuses to open.
Search for "certificate" or "ssl" did not reveal anything relevant in this forum.
-
@toggledbits
Hi Patrick,
Running HASS 2022.5.3
MSR zwavejs-22126-834c3e9Seeing weird behavior in MSR with regards to my Zen32's. Not sure how to capture info that might be relevent but will describe what I am seeing.
In the example below I pressed scene 001 4 times. It flashed and changed the primary value to "4". The remaining buttons were previously showing the PV as "double" I pushed each button one time and they flashed and displayed the PV as 4.
zen32.JPGIn the zwavejs2mqtt debug screen that sequence looks like this.
2022-05-10 09:38:44.078 INFO ZWAVE: Node 45: value notification: 91-0-scene-001 5 2022-05-10T16:38:44.081Z CNTRLR « [Node 045] received CentralScene notification { "nodeId": 45, "ccId": "Central Scene", "ccCommand": "0x03", "payload": "0x898501" } 2022-05-10 09:38:45.982 INFO ZWAVE: Node 45: value notification: 91-0-scene-002 0 2022-05-10T16:38:45.984Z CNTRLR « [Node 045] received CentralScene notification { "nodeId": 45, "ccId": "Central Scene", "ccCommand": "0x03", "payload": "0x8a8002" } 2022-05-10 09:38:47.807 INFO ZWAVE: Node 45: value notification: 91-0-scene-003 0 2022-05-10T16:38:47.810Z CNTRLR « [Node 045] received CentralScene notification { "nodeId": 45, "ccId": "Central Scene", "ccCommand": "0x03", "payload": "0x8b8003" } 2022-05-10 09:38:48.858 INFO ZWAVE: Node 45: value notification: 91-0-scene-004 0 2022-05-10T16:38:48.861Z CNTRLR « [Node 045] received CentralScene notification { "nodeId": 45, "ccId": "Central Scene", "ccCommand": "0x03", "payload": "0x8c8004" }Let me know what other info you would like me to supply.
I have played around with a bunch of other key stroke combo's and it looks like buttons 2-5 display what ever button 1 is set to.
Have tested this on 4 different ZEN32's and it is same on all. -
Running zwavejs-22118-baab576 in MSR, HASSOS 2022.5.1
Due to an unreported issue in HASS, when I upgraded the 2022.5 yesterday, it dropped ZwaveJS2MQTT from my HASSOS build. Finally got it reinstalled and it appears to be working the way it was previously.
MSR is now showing zwavejs down and in entities, nothing is updating.Seeing this in the logs:
ZWaveJSController#zwavejs ws_open caught [Error]Error: connect ECONNREFUSED 192.168.0.16:3000Are there additional steps needed that are not mentioned in the manual?
At a loss to figure out what is causing issue. -
Hi!
After several tests, restarting the computer where the MSR is, and the MSR itself by Tools > Restart, I have a persistent error in the logs.
32d45bc3-51f8-4718-a113-3381e9d7edf2-image.png
Looking at the global expression (screen below), I see that it is highlighted as an error, however, if I look at two other expressions above that have the same structure, they do not present an error, so I do not think the problem is with the expression's code.
ca8a7867-4ac7-4f9a-9913-15a80da18f05-image.png
This expression uses a group, which validates 4 devices of type door sensor, whether the status is true or false, door open or closed.
"dgc_entrance_open": name: DGC Entrance Open select: - include_entity: - "hubitat>37" - "hubitat>38" - "hubitat>99" - "hubitat>130" filter_expression: > entity.attributes?.door_sensor?.state == trueI also compared it with other groups, the structure is identical.
Looking at the 4 devices in this group, I see that all are active in the MSR, have similar variables, are used in other groups and rules that do not present a problem.
52b099f4-b9c4-46cb-ad3d-c873b09b7e13-image.png
Looking at the log, I understand that it refers to some object that would be null, at which point I am lost on what to actually look at.
[latest-22118]2022-05-02T22:33:11.711Z <Engine:INFO> Reaction Engine starting [latest-22118]2022-05-02T22:33:11.719Z <Engine:INFO> Checking rule sets... [latest-22118]2022-05-02T22:33:11.746Z <Engine:INFO> Checking rules... [latest-22118]2022-05-02T22:33:11.748Z <Engine:INFO> Data check complete; no corrections. [latest-22118]2022-05-02T22:33:11.892Z <Engine:ERR> [Engine]Engine#1: error evaluating expression EntranceOPEN: [ReferenceError]ReferenceError: Invalid scope in reference to member attributes of (object)null [latest-22118]2022-05-02T22:33:11.893Z <Engine:ERR> [Engine]Engine#1: expression: sort(each id in ( getEntity('groups>dgc_entrance_open').attributes.sys_group.members ): getEntity(id).name) [latest-22118]2022-05-02T22:33:11.894Z <Engine:CRIT> ReferenceError: Invalid scope in reference to member attributes of (object)null ReferenceError: Invalid scope in reference to member attributes of (object)null at _run (C:\MSR\reactor\common\lexp.js:1449:31) at _run (C:\MSR\reactor\common\lexp.js:1443:33) at _run (C:\MSR\reactor\common\lexp.js:1443:33) at _run (C:\MSR\reactor\common\lexp.js:1536:38) at _run (C:\MSR\reactor\common\lexp.js:1480:33) at C:\MSR\reactor\common\lexp.js:1283:29 at Array.forEach (<anonymous>) at _run (C:\MSR\reactor\common\lexp.js:1282:28) at run (C:\MSR\reactor\common\lexp.js:1663:22) at Object.evaluate (C:\MSR\reactor\common\lexp.js:1699:20) [latest-22118]2022-05-02T22:33:12.232Z <Engine:NOTICE> Reaction Engine running! [latest-22118]2022-05-02T22:33:12.233Z <Rule:INFO> Rule#rule-kxjp2el2 (Mode DAY) started [latest-22118]2022-05-02T22:33:12.234Z <Rule:INFO> Rule#rule-kxjp7kc8 (Mode EVENING) started [latest-22118]2022-05-02T22:33:12.234Z <Rule:INFO> Rule#rule-kxjparz7 (Mode NIGHT) started [latest-22118]2022-05-02T22:33:12.234Z <Rule:INFO> Rule#rule-kxjpd0d6 (Mode AWAY ∆) started [latest-22118]2022-05-02T22:33:12.235Z <Rule:INFO> Rule#rule-kxjqrcr9 (Mode PARTY) started [latest-22118]2022-05-02T22:33:12.235Z <Rule:INFO> Rule#rule-kxjqyhnu (Mode VACATION ∆) startedFinally, if I return the expression and press the Try This Expression button, it is executed and the error disappears.
102e5013-b9aa-4c26-98f5-1ae545f8897f-image.png
This situation started to occur on the latest version of Reactor 22118, on a Windows 10 Bare Metal installation. Does anyone have a similar scenario?
Sorry for the long post, I tried to document as best as possible to try to identify the problem.
Thanks.
-
Please can anyone give me advice on a cheap way to run MSR (both initial cost and ongoing electricity cost). I currently run it on my QNAP network drive (which works very well incidentally). However, this draws a constant 35Watts (£90/yr @ 30p/kWh) and given the recent rise in fuel costs I am evaluating the best way forwards. Note, I only really need to turn my QNAP on for an hour a week to back-up my computer data. I understand that MSR can run on a Raspberry PI, but I am not competent with Linux! Thanks.
-
I just noticed that the new hotness picked up the entities from when I added an integration temporarily to my Home Assistant and popped a lovely info notice into the Alerts pane.
I know the info is new - but when did MSR suddenly become more real-time with devices being added to hubs? This is great!
-
Noticed in the last few nights that my Global Reaction to turn on a mere six lights in the evenings the same two devices no longer turn on. One is a dimming smart bulb, the other is a wall outlet.
This has been running flawlessly for months - just in the last few nights I've noticed these two devices being left behind and yes, it's always these two devices only.
"What changed?"
No Hubitat firmware updates No new devices added to Hubitat list itemTwo MSR updates (the last two, I keep up with the latest) list itemHome Assistant releases (should have zero bearing, HA is nothing more than pretty dashboards) list itemAdded MQTT to MSRI did do a z-wave "repair" last night and am waiting to see if this helps.
Is there any maximum or cap on number of devices that should be included in a Global Reaction?
*Marked as solved as the question asked was answered. The issue persists but the question was answered.
-
I've borked my install of reactor-latest-22118-0f0772c.tar.gz for some reason and am retracing steps. Running npm i --no-save --omit dev prompted to update npm and I did (current version now 8.6.0). Currently, attempts to load via browser/s (Brave and Safari) result in "This site can’t be reached192.168.1.xxx refused to connect." I am still able to SSH into the RPi.
I haven't panicked yet but did just pull my config and storage directories - I believe I read where that's enough for a back-up if a clean install ends up being needed.
So the question of the day: which version of nmp should we be running on for the latest Reactor?
-
I’ve looked and can’t find the answer which concerns me that the answer is obvious and thats why I can't find the answer to this.
I’m new to MSR and this is my first post, so please bare with me 🙂
What I’m trying to do is have a global expression that contains the current time so I can use it in Global reactions as well as Rulesets as part of my syslog messages.
Example of what I’m experiencing:
In Expressions, create a global expression: gMyTOD = strftime("%T %D”)
In Rulesets, in a rule, create a local expression: MyTOD = strftime("%T %D”)In that same rule create a Notify type of Syslog.
Set syslog message to: gMyTOD time is ${{gMyTOD}} and MyTOD time is ${{MyTOD}}
Trigger the rule.The result is that the local expression (MyTOD) contains the correct time but the global expression (gMyTOD) does not update and reflects the wrong time in the final syslog message.
Is there a different approach I should be using?
Thank you in advance for any insight.
-bh
-
Hi!
What's the easiest and most effective way to make this work? Do I ping a few websites every ten minutes or so, or is there a better approch? If I'm going to ping, what URL is recommended?
Once a month or so, my internet access is lost, and I have to cut the power to the router, to restart it. When I'm away this become a problem, so I thought that if I got a zigbee switch (in Home Assistant), problem is solved. But how do I (MSR) know if it's offline?For information, I have a set up with Asus routers, Home Assistent with zigbee-, z-wave and wifi devices (a total of appr. 150) and every of my 60-70 automation is done by MSR.
I run MSR ver. 22080-ae7212f (docker on my Home Assistant blue). HA ver 2022.4.6.
Thanks in advance.
Take care, you all!
/Fanan -
-
So, I have a rule set that it's triggered when a local variable changes. Since it's tied to my solar production, it could change very frequently, so I've just added a reset delay to calm it down, but it's not working as intended.
What I really need is a way to, let's say, define a percentage and define a variable to understand if the new value has changed +/- 10% before going true.
I've tried a couple of ways, but I'm posting here anyway, in case anyone has found a better way to tackle this. Thanks!
-
Perhaps a dumb question. Can I check from Home Assistant that MSR is up and running? I would like to see that in a status page in HA. I can of course ping the other Pi but it doesn't say anything about the MSR status.
-
@toggledbits Is there a way to get Current Alerts as an entity so I could monitor those and send notifications if needed.
My usecase is sometimes openLuup crashes and MSR picks that up pretty quick, sending a pushover notification to me would get my attention to restart it.
Of course there are many ways to monitor connectivity but since MSR already is doing that it would be neat to take advantage of it. -
Hey @toggledbits.
From the docs:You cannot control the state of rules via MQTT. Rule state is driven exclusively by the result of its conditions.
And I'm OK when rules are triggered by something else, but I've built a couple of rules to be used by other rules, to streamline the logic, and it'll be useful to invoke a rule via MQTT. It's probably close to what rule/:id/restart is doing in the HTTP api.
Thanks!
-
I'm trying to create some automation so I can control my pool variable speed pump from reactor rather than iAqualink (which sucks). My controller is MQTT enabled so I created several scripts for my desired speeds. (I know reactor has MQTT ability but honestly I read the docs and could not make much sense of it and since I already have it set up in Home Assistant, I figured I would just leverage that instead)
So I created all of my scripts and tested them, they worked perfectly. The I created a rule in reactor and set running the script as the action. The problem is that reactor is telling me that I have to make a selection. I try to click the dropdown and there is nothing to select. I cant save the rule, the only option is to exit.
9e0a3147-5058-4893-9860-2f0d759dfe3c-image.png
Here is my script in Home Assistant. Any advice on how to get this to work? If I am looking at this the wrong way I am open to suggestions (I would rather be able to call a specific action and specify a speed value but I cannot figure out how to do that). Thanks in advance.
-
Hi, I've been using msr for a while now and haven't had timezone issues until today when I updated to latest docker image (latest-22080-ae7212f)
both docker date command and my local date command show the same time, same timezone, but for some reason MSR shows the host time as 2 hours in the past as a result all my timed rules run 2 hours late.
my locale is set correctly in the host machine and is bound into the container as well.
One possible hint I get is maybe this from the container startup log, but other than timezone stuff everything else seems to be working fine and all my settings loaded up just fine.
[latest-22080]2022-04-07T07:52:52.423Z <SystemController:null> Module SystemController v22080 root {} CommonJS loading [latest-22080]2022-04-07T07:52:57.236Z <Engine:CRIT> SyntaxError: Unexpected end of JSON input SyntaxError: Unexpected end of JSON input at JSON.parse (<anonymous>) at IndividualFileStrategy.getDataObject (/opt/reactor/server/lib/IndividualFileStrategy.js:121:46) at Container.getDataObject (/opt/reactor/server/lib/Container.js:102:53) at new GlobalExpression (/opt/reactor/server/lib/GlobalExpression.js:105:179) at Function.getInstance (/opt/reactor/server/lib/GlobalExpression.js:123:89) at /opt/reactor/server/lib/Engine.js:1349:67 at Array.forEach (<anonymous>) at Engine.initializeGlobalExpressions (/opt/reactor/server/lib/Engine.js:1345:145) at Engine.start (/opt/reactor/server/lib/Engine.js:590:285) at /opt/reactor/app.js:362:103Let me know if I can provide further info to help debug this.
Thanks
Cheapest platform on which to run MSR
-
Please can anyone give me advice on a cheap way to run MSR (both initial cost and ongoing electricity cost). I currently run it on my QNAP network drive (which works very well incidentally). However, this draws a constant 35Watts (£90/yr @ 30p/kWh) and given the recent rise in fuel costs I am evaluating the best way forwards. Note, I only really need to turn my QNAP on for an hour a week to back-up my computer data. I understand that MSR can run on a Raspberry PI, but I am not competent with Linux! Thanks.
-
RPis are, I think, a good alternative. But, you're not likely to find much that is price-competitive with RPis that has a management GUI like the QNAP to reduce the learning curve. My advice to you would be to learn some basic Linux command line stuff and get fluent. This a good place to do it. The RPi is a good platform to do it on. If you make good backups, you really won't set yourself back very much if you end up wrecking something accidentally. As they say, the best time to start was yesterday; the second best time is now.
A 2GB RPi 4B+ runs about USD45 right now. You absolutely can run on 1GB if you don't run too much alongside (e.g. no InfluxDB, for example, although an MQTT broker would probably not be much of an issue), and that would get you down to USD35. I have run successfully on a 512MB 3B+ as well.
Continuing in that direction, I strongly recommend that you use a real SSD rather than a MicroSD card. The latter is not usually designed for the high write cycles of a typical Linux system. You may do fine with one of the camera-targeted MicroSD cards (""high endurance"), at least for a while. Capacity can be small; 8 or 16GB would suffice, so you're in a cost-effective range, and that may hold you for a while until you can upgrade to SSD. Going to an SSD, you would need not only the SSD, but a USB3.1 to SATA interface; the latter runs about USD15 on Amazon, and make sure you get a true USB3.1 version (there are two very similar, one is only USB3.0 and was previously not supported by the Pi firmware, although it may be now; there's a compatibility list published somewhere; we can dig later if you need it). Cheap small SSDs run <USD30 on Amazon, and I even found a five-pack of 64GB for USD18 (you may get a surprise later from the Department of Getting What You Pay For).
In terms of power, it's going to be in the 5-10W range depending on what it's doing, so I think worst-case, you're down to about a third the energy cost, but in the first year, the hardware cost will eat up the difference.
-
@toggledbits new Raspberry PI are in short supply here in the UK and therefore quite expensive. I have come across a Raspberry PI 2. Do you think this is worth a try or is it a non-starter from the off? Thanks.
-
No, a Pi 2 won't do it. Well, you probably could, but I don't recommend it and I haven't tried it. A 3B+ is workable. I've tested that, so that's the safest minimum I can recommend.
I've had trouble getting Pis as well for multiple projects, but I recently found rpilocator.com and I can highly recommend it. If you follow them on Twitter you can basically get alerts from them and it helps. You need to be quick. Yesterday they reported over 100 units available from a popular US seller, and today that seller is reported out of stock.
I recently managed to get a Compute Module 4 with 8GB EMMC (built-in Flash storage like an SSD). That ran me US$45 for the CM4, and another $40 for the I/O board on which you mount it. I am testing that right now, and will likely use it as my build system for 64-bit Raspbian Bullseye releases (coming soon). It's much tidier than fussing with the USB-SATA adapter. That is all equivalent to a 4B+ in power, and may be equivalent or even a little lower in price -- by the time you've purchased a Pi 4B+ with 2GB RAM, an 8GB or larger SSD, and the USB 3.1 to SATA interface, you're in the same price range. Either way you go, the investment is a computing platform you can use for a long time; they've got good power, are well-built little boards (all), etc.
Also, for any configuration with less than 2GB RAM, I recommend using the "Lite" version of the OS install (no desktop/GUI, command line only). That would include the 3B+.
-
Raspberry Pi's are in short supply (scarce) and also costly now, thanks to the chip shortage.
Also the power supply is VERY important, a phone charger won't cut it especially on the most recent Pi4, I swapped an V1 Pi4 out with a new and now more expensive Pi4 yesterday and couldn't get it to boot on the old Power Supply. It was doing my head in until I swapped it for a 2.4A Inline charger.
This brings me to what I was going to start a new thread on but you beat me to it.
What are are alternatives to a Pi4? -
Bloody hell they have got spendy! Unless there's a specific chip that's running short for the Pis I'd expect all similar devices to suffer from the same inflation
C
-
I'm not seeing that, at least, not here in the States, among the usual major sellers, they all seem to be sticking to normal pricing when they have product (Adafruit, Arrow, Pishop, Digi-Key, etc.). It has been reported that Raspberry is focusing on its commercial customers first, so their production has leaned more into the Compute Modules than the standalone boards, but you can still get them, and I look at that availability of 100 at Adafruit as a good sign -- it was the largest single block of product I've seen in a while. They sold off the 2GB RAM models at US$45 each, which has been MSRP since release. There are a few opportunistic new/pop-up vendors (on eBay especially, to the surprise of no one, I hope) digging for gold, but the majors seem to be toeing the line.