full devices reset

[DesT]

@akbooer You should have them in private message here

[akbooer]

This is slightly tricky, partly because it's at least three years since I looked at this, and also because some of the ZWay devices are subsumed into single Luup devices and others are split into separate children.

My philosophy, currently, is not to change the plugin (since I can't easily test it) but to provide a script to run which will make the changes.

You also have a ZWay "global room" which doesn't get uniquely mapped into any single openLuup room...

[DesT]

That's fine if it's a script instead of having a new plugin version

[akbooer]

This post is deleted!

[DesT]

Just for fun, am I able to execute the script myself when I'm doing changes ?

[akbooer]

Oh yes, it just runs in the openLuup LuaTest window.

Before I let you loose on it, there are a couple of tweaks needed. I’ve used the ZWay devices file you sent, obviously, and put it into the cmh-ludl folder so that the script can find it. Is that a reasonable mode of working?

Otherwise, I could get it to pick up the info from the bridge itself, but then I’d need to make some changes to that, and an update to openLuup too. Not a huge deal, I hope, but, again, I’m not able to test it.

Either way, you’d need to ensure that you had a backup of your latest user_data.json, in case of emergencies.

[akbooer]

OK, so I decided to update the bridge to make this a bit easier.

Please update to the latest development versions of both openLuup and ZWay.

Then I'll provide a test script to see if this pulls the relevant data correctly.

[DesT]

Done. I'm not on both dev version

[akbooer]

OK, so running this in LuaTest should (if I modified the bridge correctly) provide the same listing as I sent previously. It should NOT make any changes to the system.

-- script to rename ZWay devices in openLuup
local json = require "openLuup.json"
local zway = luup.openLuup.find_device {device_type = "ZWay"}
local DEVS = luup.devices[zway].environment.DEVS
local Offset = luup.variable_get("urn:akbooer-com:serviceId:ZWay1", "Offset", zway)

-- lookup table for existing Luup rooms
local function room_index()
  local idx = {}
  for i,n in pairs(luup.rooms) do
    idx[i] = n
    idx[n] = i
  end
  return idx
end

-- Luup device numbers in running system, indexed by altid
local function luup_devNos(block)  
  block = tonumber(block)
  local devs = {}
  for i,d in pairs(luup.devices) do
    if i > block then
      local id = d.id
      devs[id] = i
    end
  end
  return devs
end

-- ZWay devices: ids, names, locations
local function zDevs(devices) 
  local devs = {}
  for i, d in ipairs(devices) do
    local id = d.id: match "ZWayVDev_zway_(.+)" or '?'
    local shortId = id: match "^%d+%-%d+"
    local shortId = id: match "^(%d+%-%d)%-%d+$"
--    print(id, shortId)
    devs[i] = {id = id, shortId = shortId, roomName = d.locationName, name = d.metrics.title}
  end
  return devs
end

-- Start here

local D = DEVS

local rename = "[%d] %45s  ->  %-s"
local placename = "%s / '%s'"

local devNos = luup_devNos(Offset)
local zdevs = zDevs(D) 
local rooms = room_index()

for i, d in ipairs(zdevs) do
  local id = d.id
  local name = d.name
  local shortId = d.shortId
  local roomName = d.roomName

  local dno = devNos[shortId] or devNos[id]
  if (dno) then 
    local dev = luup.devices[dno]
    local oldName = dev.description
    local oldRoom = rooms[tonumber(dev.attributes.room)]
    roomName = rooms[roomName] and roomName or oldRoom    -- leave in place if new room not found

    newRoom = roomName ~= oldRoom
    newName = name ~= oldName
    if newRoom or newName then
      print(rename:format(dno or 0, placename:format(oldRoom, oldName) , placename:format(roomName, name)))
    end
  end
end

[DesT]

[akbooer]

OK, I thought we should probably build up slowly, but went for broke.

Try just this in the LuaTest:

local zway = luup.openLuup.find_device {device_type = "ZWay"}
local DEVS = luup.devices[zway].environment.DEVS

print(pretty(DEVS))

[DesT]

[akbooer]

Ah, I feared that would be the case…
..and ZWay is up and running OK?

[DesT]

yeah of course

[akbooer]

We could revert to reading the file, but if you’re not too much in a rush, then I’ll try to fix this.

[DesT]

nah no worries, I can copy the file... zway and openLuup is on the same machine, so it's pretty easy to copy the file

[DesT]

I can even make a symbolic link

[akbooer]

OK, here the modified script.
Change the file name and folder to your chosen place in line 3.
Again, this should just produce the listing, not make changes.

-- script to rename ZWay devices in openLuup

filename = "Des/DES_ZWay.json"  -- change this to the right place

local json = require "openLuup.json"
local zway = luup.openLuup.find_device {device_type = "ZWay"}
local DEVS = luup.devices[zway].environment.DEVS
local Offset = luup.variable_get("urn:akbooer-com:serviceId:ZWay1", "Offset", zway)

local function read_ZWay_data(filename)
  local f = io.open (filename)
  if not f then error "file not found" end
  local j = f: read "*a"
  f: close()
  local D = json.decode (j)
  return D.data.devices
end

-- lookup table for existing Luup rooms
local function room_index()
  local idx = {}
  for i,n in pairs(luup.rooms) do
    idx[i] = n
    idx[n] = i
  end
  return idx
end

-- Luup device numbers in running system, indexed by altid
local function luup_devNos(block)  
  block = tonumber(block)
  local devs = {}
  for i,d in pairs(luup.devices) do
    if i > block then
      local id = d.id
      devs[id] = i
    end
  end
  return devs
end

-- ZWay devices: ids, names, locations
local function zDevs(devices) 
  local devs = {}
  for i, d in ipairs(devices) do
    local id = d.id: match "ZWayVDev_zway_(.+)" or '?'
    local shortId = id: match "^(%d+%-%d)%-%d+$"
    devs[i] = {id = id, shortId = shortId, roomName = d.locationName, name = d.metrics.title}
  end
  return devs
end

-- Start here

local D = read_ZWay_data (filename)

local rename = "[%d] %45s  ->  %-s"
local placename = "%s / '%s'"

local devNos = luup_devNos(Offset)
local zdevs = zDevs(D) 
local rooms = room_index()

for i, d in ipairs(zdevs) do
  local id = d.id
  local name = d.name
  local shortId = d.shortId
  local roomName = d.roomName

  local dno = devNos[shortId] or devNos[id]
  if (dno) then 
    local dev = luup.devices[dno]
    local oldName = dev.description
    local oldRoom = rooms[tonumber(dev.attributes.room)]
    roomName = rooms[roomName] and roomName or oldRoom    -- leave in place if new room not found

    newRoom = roomName ~= oldRoom
    newName = name ~= oldName
    if newRoom or newName then
      print(rename:format(dno or 0, placename:format(oldRoom, oldName) , placename:format(roomName, name)))
    end
  end
end

[DesT]

it's working

[DesT]